Jiri Olsa [Tue, 3 Dec 2013 13:09:34 +0000 (14:09 +0100)]
tools lib traceevent: Add scsi plugin
Adding scsi plugin.
This plugin adds fields resolving functions for following tracepoint
events:
scsi:scsi_dispatch_cmd_start
scsi:scsi_dispatch_cmd_error
scsi:scsi_dispatch_cmd_done
scsi:scsi_dispatch_cmd_timeout
The diff of 'perf script' output generated by old and new code:
(data was generated by 'perf record -e 'scsi:scsi_dispatch_cmd*' -a)
- swapper 0 [000] 6620.491019: scsi:scsi_dispatch_cmd_done: [FAILED TO PARSE] host_no=0 channel=0 id=0 lun=0 result=0 opcode=53 cmd_len=10 data_sglen=0 prot_sglen=0 prot_op=0 cmnd=5
+ swapper 0 [000] 6620.491019: scsi:scsi_dispatch_cmd_done: host_no=0 channel=0 id=0 lun=0 data_sgl=0 prot_sgl=0 prot_op=SCSI_PROT_NORMAL cmnd=(SYNCHRONIZE_CACHE - raw=35 00 00 00 00 00 00 00 00 00) result=(driver=DRIVER_OK host=DID_OK message=COMMAND_COMPLETE status=SAM_STAT_GOOD)
- kworker/0:0 21554 [000] 6620.491126: scsi:scsi_dispatch_cmd_start: [FAILED TO PARSE] host_no=0 channel=0 id=0 lun=0 opcode=42 cmd_len=10 data_sglen=1 prot_sglen=0 prot_op=0 cmnd=*
+ kworker/0:0 21554 [000] 6620.491126: scsi:scsi_dispatch_cmd_start: host_no=0 channel=0 id=0 lun=0 data_sgl=1 prot_sgl=0 prot_op=SCSI_PROT_NORMAL cmnd=(WRITE_10 lba=
570899168 txlen=8 protect=0 raw=2a 00 22 07 3a e0 00 00 08 00)
- jbd2/dm-3-8 593 [002] 6621.607992: scsi:scsi_dispatch_cmd_error: [FAILED TO PARSE] host_no=0 channel=0 id=0 lun=0 rtn=4182 opcode=53 cmd_len=10 data_sglen=0 prot_sglen=0 prot_op=0 cmnd=5
+ jbd2/dm-3-8 593 [002] 6621.607992: scsi:scsi_dispatch_cmd_error: host_no=0 channel=0 id=0 lun=0 data_sgl=0 prot_sgl=0 prot_op=SCSI_PROT_NORMAL cmnd=(SYNCHRONIZE_CACHE - raw=35 00 00 00 00 00 00 00 00 00) rtn=4182
NOTE I couldn't generate scsi_dispatch_cmd_timeout tracepoint,
but it's similar to the rest, so I believe it's ok.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-21-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 3 Dec 2013 13:09:33 +0000 (14:09 +0100)]
tools lib traceevent: Add xen plugin
Adding xen plugin.
This plugin adds fields resolving for following tracepoint events:
xen:xen_mc_entry
xen:xen_mc_extend_args
The diff of 'perf script' output generated by old and new code: (data
was generated by 'perf record -e 'xen:*' ls')
--- script.xen.old
+++ script.xen.new
- swapper 0 [002] 136.267492: xen:xen_mc_entry: [FAILED TO PARSE] op=3 nargs=2 args=ARRAY[18, 00, 00, 00, 00, 00, 00, 00, 00, e0, d4, 4b, 04, 88, ff, ff, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00]
+ swapper 0 [002] 136.267492: xen:xen_mc_entry: op 3(stack_switch) args [18, 0, 0, 0, 0, 0]
- perf 1970 [008] 136.273319: xen:xen_mc_extend_args: [FAILED TO PARSE] op=1 args=16 res=1
+ perf 1970 [008] 136.273319: xen:xen_mc_extend_args: extending op 1(mmu_update) by 16 bytes res ???
NOTE We still do not handle the 'sizeof' and fail to parse following xen
tracepoints:
xen:xen_mmu_set_pte
xen:xen_mmu_set_pte_atomic
xen:xen_mmu_set_domain_pte
xen:xen_mmu_set_pte_at
xen:xen_mmu_set_pmd
xen:xen_mmu_set_pud
xen:xen_mmu_set_pgd
xen:xen_mmu_ptep_modify_prot_start
xen:xen_mmu_ptep_modify_prot_commit
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-20-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 3 Dec 2013 13:09:32 +0000 (14:09 +0100)]
tools lib traceevent: Add function plugin
Backporting function plugin.
Backported from Steven Rostedt's trace-cmd repo (HEAD
0f2c2fb):
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git
This plugin adds function and parent function fields resolving for
ftrace:function tracepoint event.
The diff of 'perf script' output generated by old and new code:
(data was generated by 'perf record -e ftrace:function ls')
--- script.function.old
+++ script.function.new
- ls 10781 [001] 32667.291379: ftrace:function:
ffffffff811adb80 <--
ffffffff811afc48
- ls 10781 [001] 32667.291379: ftrace:function:
ffffffff811b35d0 <--
ffffffff811adb9b
- ls 10781 [001] 32667.291380: ftrace:function:
ffffffff811b3520 <--
ffffffff811b35e8
- ls 10781 [001] 32667.291380: ftrace:function:
ffffffff811b2720 <--
ffffffff811b3549
- ls 10781 [001] 32667.291381: ftrace:function:
ffffffff81297e10 <--
ffffffff811b356c
- ls 10781 [001] 32667.291381: ftrace:function:
ffffffff81298f40 <--
ffffffff81297e2c
- ls 10781 [001] 32667.291382: ftrace:function:
ffffffff81076160 <--
ffffffff811afbf0
- ls 10781 [001] 32667.291383: ftrace:function:
ffffffff811c3eb0 <--
ffffffff811afbfc
- ls 10781 [001] 32667.291383: ftrace:function:
ffffffff8164e100 <--
ffffffff811c3ed8
- ls 10781 [001] 32667.291384: ftrace:function:
ffffffff811a5d10 <--
ffffffff811c3f53
- ls 10781 [001] 32667.291384: ftrace:function:
ffffffff811e8e70 <--
ffffffff811a5d58
- ls 10781 [001] 32667.291385: ftrace:function:
ffffffff811f38e0 <--
ffffffff811a5d63
- ls 10781 [001] 32667.291385: ftrace:function:
ffffffff811a9ff0 <--
ffffffff811a5d6b
- ls 10781 [001] 32667.291386: ftrace:function:
ffffffff811a9fa0 <--
ffffffff811aa015
- ls 10781 [001] 32667.291387: ftrace:function:
ffffffff810851c0 <--
ffffffff811aa053
- ls 10781 [001] 32667.291387: ftrace:function:
ffffffff81090e00 <--
ffffffff81085211
+ ls 10781 [001] 32667.291379: ftrace:function: would_dump <-- setup_new_exec
+ ls 10781 [001] 32667.291379: ftrace:function: inode_permission <-- would_dump
+ ls 10781 [001] 32667.291380: ftrace:function: __inode_permission <-- inode_permission
+ ls 10781 [001] 32667.291380: ftrace:function: generic_permission <-- __inode_permission
+ ls 10781 [001] 32667.291381: ftrace:function: security_inode_permission <-- __inode_permission
+ ls 10781 [001] 32667.291381: ftrace:function: cap_inode_permission <-- security_inode_permission
+ ls 10781 [001] 32667.291382: ftrace:function: flush_signal_handlers <-- setup_new_exec
+ ls 10781 [001] 32667.291383: ftrace:function: do_close_on_exec <-- setup_new_exec
+ ls 10781 [001] 32667.291383: ftrace:function: _raw_spin_lock <-- do_close_on_exec
+ ls 10781 [001] 32667.291384: ftrace:function: filp_close <-- do_close_on_exec
+ ls 10781 [001] 32667.291384: ftrace:function: dnotify_flush <-- filp_close
+ ls 10781 [001] 32667.291385: ftrace:function: locks_remove_posix <-- filp_close
+ ls 10781 [001] 32667.291385: ftrace:function: fput <-- filp_close
+ ls 10781 [001] 32667.291386: ftrace:function: file_sb_list_del <-- fput
+ ls 10781 [001] 32667.291387: ftrace:function: task_work_add <-- fput
+ ls 10781 [001] 32667.291387: ftrace:function: kick_process <-- task_work_add
Removing options support as it's not backported yet.
Currently this plugin supports 2 options:
'parent' to display parent function
'indent' to show function call indents
Enabling both of them by default.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-19-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 3 Dec 2013 13:09:31 +0000 (14:09 +0100)]
tools lib traceevent: Add sched_switch plugin
Backporting sched_switch plugin.
Backported from Steven Rostedt's trace-cmd repo (HEAD
0f2c2fb):
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git
This plugin adds fields resolving for sched:sched_switch tracepoint
event.
The diff of 'perf script' output generated by old and new code:
(data was generated by 'perf record -e sched:sched_switch -a')
--- script.sched_switch.old
+++ script.sched_switch.new
- perf 577 [002] 30965.311852: sched:sched_switch: prev_comm=perf prev_pid=577 prev_prio=120 prev_state=S ==> next_comm=swapper/2 next_pid=0 next_prio=120
+ perf 577 [002] 30965.311852: sched:sched_switch: perf:577 [120] S ==> swapper/2:0 [120]
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-18-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 3 Dec 2013 13:09:30 +0000 (14:09 +0100)]
tools lib traceevent: Add mac80211 plugin
Backporting mac80211 plugin.
Backported from Steven Rostedt's trace-cmd repo (HEAD
0f2c2fb):
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git
This plugin adds changed field resolving for
mac80211:drv_bss_info_changed tracepoint event.
The diff of 'perf script' output generated by old and new code:
(data was generated by 'perf record -e 'mac80211:drv_bss_info_changed' -a')
--- script.mac80211.old
+++ script.mac80211.new
- ifconfig 3711 [000] 1290.446492: mac80211:drv_bss_info_changed: phy0 vif:wlan0(2) changed:0x309f
+ ifconfig 3711 [000] 1290.446492: mac80211:drv_bss_info_changed: phy0 vif:wlan0(2)
+ assoc:0 aid:2 cts:0 shortpre:0 shortslot:0 dtimper:1
+ bcnint:102 assoc_cap:0x431 basic_rates:0xf enable_beacon:0
+ ht_operation_mode:0
Omitting the mac80211:drv_config tracepoint handling because the kernel
tracepoint changed its prototype and the plugin handler is no longer
working.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-17-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 3 Dec 2013 13:09:29 +0000 (14:09 +0100)]
tools lib traceevent: Add kvm plugin
Backporting kvm plugin.
Backported from Steven Rostedt's trace-cmd repo (HEAD
0f2c2fb):
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git
This plugin adds field resolving functions for following
tracepoint events:
kvm:kvm_exit
kvm:kvm_emulate_insn
kvm:kvm_nested_vmexit
kvm:kvm_nested_vmexit_inject
kvmmmu:kvm_mmu_get_page
kvmmmu:kvm_mmu_sync_page
kvmmmu:kvm_mmu_unsync_page
kvmmmu:kvm_mmu_zap_page
kvmmmu:kvm_mmu_prepare_zap_page
The diff of 'perf script' output generated by old and new code:
(data was generated by 'perf record -e 'kvm:*,kvmmmu:*' -a')
--- script.kvm.old
+++ script.kvm.new
qemu-system-x86 17414 [000] 6868.995053: kvm:kvm_exit: reason EPT_VIOLATION rip 0xfff0 info 184 0
qemu-system-x86 17414 [000] 6868.995109: kvm:kvm_emulate_insn: f0000:c46b:e4 71 (real)
- qemu-system-x86 3006 [002] 10562.079422: kvmmmu:kvm_mmu_get_page: [FAILED TO PARSE] mmu_valid_gen=0x2 gfn=0 role=122884 root_count=0 unsync=0 created=1
+ qemu-system-x86 3006 [002] 10562.079422: kvmmmu:kvm_mmu_get_page: new sp gfn 0 0/4 q0 direct --- !pge !nxe root 0 sync
- qemu-system-x86 3006 [002] 10562.080502: kvmmmu:kvm_mmu_prepare_zap_page: [FAILED TO PARSE] mmu_valid_gen=0x2 gfn=0 role=122884 root_count=1 unsync=0
+ qemu-system-x86 3006 [002] 10562.080502: kvmmmu:kvm_mmu_prepare_zap_page: 0/4 q0 direct --- !pge !nxe root 1 sync
qemu-system-x86 3290 [002] 10708.755312: kvmmmu:fast_page_fault: [FAILED TO PARSE] vcpu_id=0 gva=
4094486080 error_code=3 sptep=0xffff88019f1e3670 old_spte=
336391285 new_spte=
336391287 retry=1
- insmod 2576 [001] 781.731666: kvmmmu:kvm_mmu_sync_page: [FAILED TO PARSE] mmu_valid_gen=0x1 gfn=2 role=24624 root_count=10 unsync=1
+ insmod 2576 [001] 781.731666: kvmmmu:kvm_mmu_sync_page: 3/0 q0 --- !pge !nxe root 10 unsync
- insmod 2576 [001] 781.731668: kvmmmu:kvm_mmu_unsync_page: [FAILED TO PARSE] mmu_valid_gen=0x1 gfn=2 role=24624 root_count=10 unsync=1
+ insmod 2576 [001] 781.731668: kvmmmu:kvm_mmu_unsync_page: 3/0 q0 --- !pge !nxe root 10 unsync
Note:
- kvm_mmu_zap_page is replaced by kvm_mmu_prepare_zap_page
in current kernel, keeping it for backward compatibility
- some of the tracepoints keep the same output even with
the plugin handling: kvm:kvm_exit, kvm:kvm_emulate_insn
- the 'kvmmmu:fast_page_fault' is still broken because of
missing is_writable_pte function and is fixed in another patch
- ommited following tracepoints from backport because
the output was buggy
kvm:kvm_nested_vmexit
kvm:kvm_nested_vmexit_inject
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-16-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 3 Dec 2013 13:09:28 +0000 (14:09 +0100)]
tools lib traceevent: Add kmem plugin
Backporting kmem plugin.
Backported from Steven Rostedt's trace-cmd repo (HEAD
0f2c2fb):
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git
This plugin adds call_site field resolving for following tracepoint
events:
kmem:kfree
kmem:kmalloc
kmem:kmalloc_node
kmem:kmem_cache_alloc
kmem:kmem_cache_alloc_node
kmem:kmem_cache_free
The diff of 'perf script' output generated by old and new code: (data
was generated by 'perf record -e 'kmem:*' -a')
--- script.kmem.old
+++ script.kmem.new
- perf 27846 [001] 29643.403319: kmem:kfree: call_site=
ffffffff810e64f6 ptr=(nil)
+ perf 27846 [001] 29643.403238: kmem:kfree: (__audit_syscall_exit+0x1f6) call_site=
ffffffff810e64f6 ptr=(nil)
- perf 27846 [001] 29643.403337: kmem:kmem_cache_alloc: call_site=
ffffffff812ff0c5 ptr=0xffff88020e155630 bytes_req=560 bytes_alloc=568 gfp_flags=GFP_KERNEL
+ perf 27846 [001] 29643.403337: kmem:kmem_cache_alloc: (radix_tree_preload+0x35) call_site=
ffffffff812ff0c5 ptr=0xffff88020e155630 bytes_req=560 bytes_alloc=568 gfp_flags=GFP_KERNEL
- perf 27846 [001] 29643.403342: kmem:kmem_cache_free: call_site=
ffffffff8126ec61 ptr=0xffff88020dffe750
+ perf 27846 [001] 29643.403342: kmem:kmem_cache_free: (jbd2_journal_stop+0x221) call_site=
ffffffff8126ec61 ptr=0xffff88020dffe750
- firefox 954 [000] 29643.445477: kmem:kmem_cache_alloc_node: call_site=
ffffffff8153c64e ptr=0xffff8801cecb4000 bytes_req=256 bytes_alloc=256 gfp_flags=GFP_KERNEL|GFP_REPEAT node=-1
+ firefox 954 [000] 29643.445477: kmem:kmem_cache_alloc_node: (__alloc_skb+0x4e) call_site=
ffffffff8153c64e ptr=0xffff8801cecb4000 bytes_req=256 bytes_alloc=256 gfp_flags=GFP_KERNEL|GFP_REPEAT node=-1
- perf 27846 [001] 29643.445510: kmem:kmalloc: call_site=
ffffffff81250642 ptr=0xffff88020fd6c300 bytes_req=96 bytes_alloc=96 gfp_flags=GFP_NOFS|GFP_ZERO
+ perf 27846 [001] 29643.445510: kmem:kmalloc: (ext4_ext_find_extent+0x362) call_site=
ffffffff81250642 ptr=0xffff88020fd6c300 bytes_req=96 bytes_alloc=96 gfp_flags=GFP_NOFS|GFP_ZERO
- X 888 [002] 29643.445546: kmem:kmalloc_node: call_site=
ffffffff8153c67e ptr=0xffff880103828e00 bytes_req=384 bytes_alloc=512 gfp_flags=GFP_KERNEL|GFP_NOWARN|GFP_REPEAT|GFP_NOMEMALLOC node=-1
+ X 888 [002] 29643.445546: kmem:kmalloc_node: (__alloc_skb+0x7e) call_site=
ffffffff8153c67e ptr=0xffff880103828e00 bytes_req=384 bytes_alloc=512 gfp_flags=GFP_KERNEL|GFP_NOWARN|GFP_REPEAT|GFP_NOMEMALLOC node=-1
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-15-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 3 Dec 2013 13:09:27 +0000 (14:09 +0100)]
tools lib traceevent: Add hrtimer plugin
Backporting hrtimer plugin.
Backported from Steven Rostedt's trace-cmd repo (HEAD
0f2c2fb):
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git
This plugin adds function field resolving for following tracepoint
events:
timer:hrtimer_expire_entry
timer:hrtimer_start
The diff of 'perf script' output generated by old and new code: (data
was generated by 'perf record -e 'timer:hrtimer*' -a')
--- script.hrtimer.old
+++ script.hrtimer.new
- swapper 0 [000] 27405.519092: timer:hrtimer_start: [FAILED TO PARSE] hrtimer=0xffff88021e20e800 function=0xffffffff810c0e10 expires=
27398383000000 softexpires=
27398383000000
+ swapper 0 [000] 27405.519103: timer:hrtimer_start: hrtimer=0xffff88021e20e800 function=tick_sched_timer expires=
27398383000000 softexpires=
27398383000000
- swapper 0 [001] 27405.519544: timer:hrtimer_expire_entry: [FAILED TO PARSE] hrtimer=0xffff880211334058 now=
27398294182491 function=0xffffffff81086f20
+ swapper 0 [001] 27405.519544: timer:hrtimer_expire_entry: hrtimer=0xffff880211334058 now=
27398294182491 function=posix_timer_fn/0x0
Check the 'function' field is translated into the function name.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-14-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 3 Dec 2013 13:09:26 +0000 (14:09 +0100)]
tools lib traceevent: Add jbd2 plugin
Backporting jbd2 plugin.
Backported from Steven Rostedt's trace-cmd repo (HEAD
0f2c2fb):
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git
This plugin adds field resolving functions for following tracepoint
events:
jbd2:jbd2_checkpoint_stats
jbd2:jbd2_run_stats
The diff of 'perf script' output generated by old and new code:
(data was generated by 'perf record -e 'jbd2:jbd2_run_stats,jbd2:jbd2_checkpoint_stats' -a')
--- script.jbd2.old
+++ script.jbd2.new
- jbd2/dm-3-8 576 [000] 2983.748423: jbd2:jbd2_checkpoint_stats: [FAILED TO PARSE] dev=
265289731 tid=0x3f2bbb chp_time=0x0 forced_to_close=0 written=0 dropped=2
+ jbd2/dm-3-8 576 [000] 2983.748423: jbd2:jbd2_checkpoint_stats: dev 253,3 tid
4139963 chp_time 0 forced_to_close 0 written 0 dropped 2
- jbd2/dm-3-8 576 [000] 2983.852789: jbd2:jbd2_run_stats: [FAILED TO PARSE] dev=
265289731 tid=0x3f2bc0 wait=0x0 request_delay=0x0 running=0x138d locked=0x0 flushing=0x0 logging=0x68 handle_count=2995 blocks=17 blocks_logged=18
+ jbd2/dm-3-8 576 [000] 2983.852789: jbd2:jbd2_run_stats: dev 253,3 tid
4139968 wait 0 request_delay 0 running 5005 locked 0 flushing 0 logging 104 handle_count 2995 blocks 17 blocks_logged 18
This plugin also adds jbd2_dev_to_name function, which was removed from
jdb2 tracepoints recently. Keeping it in for backward compatibility
reasons.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-13-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 3 Dec 2013 13:09:25 +0000 (14:09 +0100)]
perf tools: Overload pr_stat traceevent print function
The traceevent lib uses pr_stat to display all standard info. It's
defined as __weak. Overloading it with perf version plugged into perf
output system logic.
Displaying the pr_stat stuff under '-v' option.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-12-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 3 Dec 2013 13:09:24 +0000 (14:09 +0100)]
perf tools: Add trace-event global object for tracepoint interface
In order to get the proper plugins processing we need to use full
trace-event interface when creating tracepoint events. So far we were
using shortcut to get the parsed format.
Moving current 'event_format__new' function into trace-event object as
'trace_event__tp_format'.
This function uses properly initialized global trace-event object,
ensuring proper plugins processing.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-11-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 3 Dec 2013 13:09:23 +0000 (14:09 +0100)]
perf tools: Add trace-event object
Add trace-event object to keep together 'struct pevent' object with its
loaded plugins with following interface:
int trace_event__init(struct trace_event *t);
- Initalizes 'struct pevent' object and loads plugins for it
void trace_event__cleanup(struct trace_event *t);
- Cleanups both 'struct pevent' and plugins
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-10-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 3 Dec 2013 13:09:22 +0000 (14:09 +0100)]
perf tools: Add filename__read_str util function
Adding filename__read_str util function to read
text file and return it in the char array.
The interface is:
int filename__read_str(const char *filename, char **buf, size_t *sizep)
Returns 0/-1 if the read suceeded/fail respectively.
buf - place to store the data pointer
size - place to store data size
v2 change:
- better error handling suggested by Namhyung Kim.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-9-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 3 Dec 2013 13:09:21 +0000 (14:09 +0100)]
perf tools: Add build and install plugins targets
Adding 'plugins' target along with the libtraceevent.a, so plugins are
built together with traceevent library.
Adding 'install-traceevent-plugins' Makefile install target, instructing
perf to install plugins into:
$(HOME)/.traceevent/plugins
- If installed localy under $HOME
$(DESTDIR)/$(prefix)/$(libdir)/traceevent/plugins
- If installed globally
Examples:
$ make install
...
$ find ~/.traceevent/plugins/
/home/jolsa/.traceevent/plugins/
/home/jolsa/.traceevent/plugins/plugin_mac80211.so
/home/jolsa/.traceevent/plugins/plugin_kvm.so
/home/jolsa/.traceevent/plugins/plugin_scsi.so
/home/jolsa/.traceevent/plugins/plugin_sched_switch.so
/home/jolsa/.traceevent/plugins/plugin_xen.so
/home/jolsa/.traceevent/plugins/plugin_cfg80211.so
/home/jolsa/.traceevent/plugins/plugin_function.so
/home/jolsa/.traceevent/plugins/plugin_kmem.so
/home/jolsa/.traceevent/plugins/plugin_hrtimer.so
/home/jolsa/.traceevent/plugins/plugin_jbd2.so
$ sudo make install DESTDIR=/opt/perf/
...
$ find /opt/perf/lib64/traceevent/plugins/
/opt/perf/lib64/traceevent/plugins/
/opt/perf/lib64/traceevent/plugins/plugin_kvm.so
/opt/perf/lib64/traceevent/plugins/plugin_scsi.so
/opt/perf/lib64/traceevent/plugins/plugin_mac80211.so
/opt/perf/lib64/traceevent/plugins/plugin_hrtimer.so
/opt/perf/lib64/traceevent/plugins/plugin_kmem.so
/opt/perf/lib64/traceevent/plugins/plugin_jbd2.so
/opt/perf/lib64/traceevent/plugins/plugin_sched_switch.so
/opt/perf/lib64/traceevent/plugins/plugin_function.so
/opt/perf/lib64/traceevent/plugins/plugin_cfg80211.so
/opt/perf/lib64/traceevent/plugins/plugin_xen.so
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-8-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 3 Dec 2013 13:09:20 +0000 (14:09 +0100)]
tools lib traceevent: Harmonize the install messages in lib-traceevent
Removing the 'to ...' part out of the install message, because it does
not fit to the rest of the build messages we use.
Before:
INSTALL plugin_hrtimer.so to /home/jolsa/libexec/perf-core/traceevent/plugins
INSTALL plugin_jbd2.so to /home/jolsa/libexec/perf-core/traceevent/plugins
INSTALL plugin_kmem.so to /home/jolsa/libexec/perf-core/traceevent/plugins
INSTALL plugin_kvm.so to /home/jolsa/libexec/perf-core/traceevent/plugins
INSTALL plugin_mac80211.so to /home/jolsa/libexec/perf-core/traceevent/plugins
INSTALL plugin_sched_switch.so to /home/jolsa/libexec/perf-core/traceevent/plugins
INSTALL plugin_function.so to /home/jolsa/libexec/perf-core/traceevent/plugins
INSTALL plugin_xen.so to /home/jolsa/libexec/perf-core/traceevent/plugins
INSTALL plugin_scsi.so to /home/jolsa/libexec/perf-core/traceevent/plugins
Now:
INSTALL plugin_jbd2.so
INSTALL plugin_hrtimer.so
INSTALL plugin_kmem.so
INSTALL plugin_kvm.so
INSTALL plugin_mac80211.so
INSTALL plugin_sched_switch.so
INSTALL plugin_function.so
INSTALL plugin_xen.so
INSTALL plugin_scsi.so
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-7-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 3 Dec 2013 13:09:19 +0000 (14:09 +0100)]
tools lib traceevent: Change pevent_parse_format to include pevent handle
Changing the pevent_parse_format interface to include the pevent handle.
The goal is to always use pevent object when dealing with traceevent
library. The reason is that we might need additional processing (like
plugins), which is not possible otherwise.
Patches follow to make this happen completely.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-6-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 3 Dec 2013 13:09:18 +0000 (14:09 +0100)]
tools lib traceevent: Add traceevent_host_bigendian function
Adding traceevent_host_bigendian function to get host endianity. It's
used in following patches.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-5-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 3 Dec 2013 13:09:17 +0000 (14:09 +0100)]
tools lib traceevent: Add plugin build support
Backporting missing pieces of plugin building infrastructure:
- Adding Makefile 'plugins' target to build all
defined plugins
- Adding Makefile 'install_plugins' target as 'install_lib'
target dependency
- Link plugin objects with shared object building
Backported from Steven Rostedt's trace-cmd repo (HEAD
0f2c2fb):
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git
Plugins are by default installed into following locations:
'$(HOME)/.traceevent/plugins'
- If we are installing under $(HOME)
'$(prefix)/lib/traceevent/plugins'
- Otherwise
This path is propagated to the plugin object as a plugins search path.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-4-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 3 Dec 2013 13:09:16 +0000 (14:09 +0100)]
tools lib traceevent: Add plugin support
Backporting plugin support for traceevent lib.
Backported from Steven Rostedt's trace-cmd repo (HEAD
0f2c2fb):
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/trace-cmd.git
It's now possible to use following interface to load plugins
(shared objects) to enhance pevent object functionality.
The plugin interface/hooks are as follows:
(taken from event-parse.h comments)
- 'pevent_plugin_loader' (required)
The function name to initialized the plugin.
int pevent_plugin_loader(struct pevent *pevent)
- 'pevent_plugin_unloader' (optional)
The function called just before unloading
int pevent_plugin_unloader(void)
- 'pevent_plugin_options' (optional)
Plugin options that can be set before loading
struct plugin_option pevent_plugin_options[] = {
{
.name = "option-name",
.plugin_alias = "overide-file-name", (optional)
.description = "description of option to show users",
},
{
.name = NULL,
},
};
Array must end with .name = NULL;
The plugin_alias (below) can be used to give a shorter
name to access the variable. Useful if a plugin handles
more than one event.
NOTE options support is not backported yet.
- 'pevent_plugin_alias' (optional)
The name to use for finding options (uses filename if not defined)
New traceevent functions are added to search and load
available plugins:
struct plugin_list*
traceevent_load_plugins(struct pevent *pevent)
- loads plusing for 'struct pevent' object and returns
loaded plugins list
void traceevent_unload_plugins(struct plugin_list *plugin_list);
- unload plugin list
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-3-git-send-email-jolsa@redhat.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Wed, 4 Dec 2013 14:16:36 +0000 (16:16 +0200)]
perf script: Do not call perf_event__preprocess_sample() twice)
The perf_event__preprocess_sample() function is called in
process_sample_event(). Instead of calling it again in
perf_evsel__print_ip(), pass through the resultant addr_location.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/529F3944.9050007@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Wed, 4 Dec 2013 14:23:01 +0000 (16:23 +0200)]
perf symbols: Fix random fd closing with no libelf
When built without libelf, perf tools was failing to initialize a file
descriptor, but nevertheless closing it. That sometimes resulted in the
output being truncated because the stdout file descriptor got closed.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386166981-30197-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Dongsheng Yang [Wed, 4 Dec 2013 22:56:41 +0000 (17:56 -0500)]
perf kvm: Update the 'record' man page entry for new --guest/--host behavior
As we have changed the default behavior of 'perf kvm' to --guest
enabled, the parts of the man page that covers the 'record' subcommand
are outdated.
This patch updates it to show the correct output with
--host/--guest/neither/both of them.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/3a3a9c1e05acb5a274d1d8369db5a4c6467d6276.1386197481.git.yangds.fnst@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Dongsheng Yang [Wed, 4 Dec 2013 22:56:43 +0000 (17:56 -0500)]
perf kvm: Fix spurious '=' use in man page
As option --host and --guest request no input for it, there should not
be a '=' after them in the man page sources.
And --output expects a filename as the input, so there should be a '='
after it.
This patch removes the needless '=' after --guest and --host, and adds a
'=' after --output in perf-kvm.txt.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/6124d9eb10a3f1f6b399d1db660110bc7a60fd6b.1386197481.git.yangds.fnst@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Dongsheng Yang [Wed, 4 Dec 2013 22:56:42 +0000 (17:56 -0500)]
perf kvm: Add more detail about buildid-list in man page
As the buildid is read from /sys/kernel/notes, then if we use perf kvm
buildid-list with a perf data file captured by perf kvm record with
--guestkallsyms and --guestmodules, there is no result in output.
This patch add a explanation about it and add a limit of using perf kvm
buildid-list.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/d605a805486340b53bc261aa64d7632ad0a8cf53.1386197481.git.yangds.fnst@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Dongsheng Yang [Wed, 4 Dec 2013 22:56:40 +0000 (17:56 -0500)]
perf target: Move the checking of which map function to call into function.
Check for cpu_map__dummy_new() or cpu_map__new() to be called in
perf_evlist__create_maps() is more complicated.
This patch moves the checking work into target.h, combining two
conditions and making perf_evlist__create_maps() more readable.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/b8c41f1fd2c4f0df71eb7b19aea74fb64d46cdda.1386197481.git.yangds.fnst@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Dongsheng Yang [Wed, 4 Dec 2013 22:56:39 +0000 (17:56 -0500)]
perf tools: Remove condition in machine__get_kernel_start_addr.
In machine__get_kernel_start_addr, the code, which is using
machine->root_dir to build filename, works for both host and guests
initialized from guestmount, as root_dir is set to "" for the host
machine in the machine__init() function.
So this patch remove the branch for machine__is_host.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/0a81645dd0b384a12cb4f962cf193ef8c3ce2010.1386197481.git.yangds.fnst@cn.fujitsu.com
[ Clarified changeset mentioning root_dir setup in machine__init() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 3 Dec 2013 13:09:15 +0000 (14:09 +0100)]
perf tools: Remove stackprotector feature check
We use -fstack-protector-all option to enable stack protecting for all
available functions. There's no reason for enabling -Wstack-protector to
get warning for unprotected functions.
Removing stackprotector feature check which was used to enable the
-Wstack-protector option.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1386076182-14484-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 3 Dec 2013 07:23:10 +0000 (09:23 +0200)]
perf tools: Do not disable source line lookup just because of 1 failure
Looking up an ip's source file name and line number does not succeed
always. Current logic disables the lookup for a dso entirely on any
failure. Change it so that disabling never happens if there has ever
been a successful lookup for that dso but disable if the first 123
lookups fail.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386055390-13757-8-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 3 Dec 2013 07:23:08 +0000 (09:23 +0200)]
perf symbols: Retain symbol source file name to lookup source line numbers
Currently, lookup of an ip's source file name and line number is done
using the dso file name.
Instead retain the file name used to lookup the dso's symbols and use
that.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386055390-13757-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 3 Dec 2013 07:23:07 +0000 (09:23 +0200)]
perf symbols: Retain bfd reference to lookup source line numbers
Closng and re-opening for every lookup when using libbfd to lookup
source file name and line number is very very slow. Instead keep the
reference on struct dso.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386055390-13757-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 3 Dec 2013 07:23:06 +0000 (09:23 +0200)]
perf tools: Use asprintf instead of malloc plus snprintf
The asprintf library function is equivalent to malloc plus snprintf so
use it because it is simpler.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1386055390-13757-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Wed, 4 Dec 2013 09:17:17 +0000 (10:17 +0100)]
Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core
Pull perf/tools improvements and fixes from Arnaldo Carvalho de Melo:
* Honour -m option in 'trace', the tool was offering the option to
set the mmap size, but wasn't using it when doing the actual mmap
on the events file descriptors, fix from Jiri Olsa.
* Correct the message in feature-libnuma checking, swowing the right
devel package names for various distros, from Dongsheng Yang.
* Polish 'readn' function and introduce its counterpart, 'writen', from
Jiri Olsa.
* Start moving timechart state from global variables to a 'perf_tool' derived
'timechart' struct.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jiri Olsa [Thu, 28 Nov 2013 16:57:22 +0000 (17:57 +0100)]
perf trace: Honour -m option
Currently trace command supports '-m' option, but does not honours its
value and keeps the default.
Changing the perf_evlist__mmap function call to use the '-m' configured
value.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1385657842-8914-1-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 28 Nov 2013 11:33:01 +0000 (12:33 +0100)]
perf tools: Include test-stackprotector-all.c in test-all
We're missing test-stackprotector-all.c in test-all check, adding it.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1385638408-23519-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Dongsheng Yang [Mon, 2 Dec 2013 15:26:48 +0000 (10:26 -0500)]
perf tools: Correct the message in feature-libnuma checking.
The package required for numa is named numactl-devel in Fedora or RHEL,
and libnuma-devel in OpenSuSE, and libnuma-dev in Ubuntu.
This patch corrects the package name in warning message in
feature-libnuma checking.
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Acked-by: Peter Hurley <peter@hurleysoftware.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Link: http://lkml.kernel.org/r/1385998008-6851-1-git-send-email-yangds.fnst@cn.fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 28 Nov 2013 16:26:33 +0000 (13:26 -0300)]
perf timechart: Move wake_events list to 'struct timechart'
Removing another global variable.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <stfomichev@yandex-team.ru>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-14rpuci11l2s0o01yta87kxe@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 28 Nov 2013 16:23:05 +0000 (13:23 -0300)]
perf timechart: Move power_events list to 'struct timechart'
Removing another global variable.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <stfomichev@yandex-team.ru>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2akef3p9caau56itf5mugd2b@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 28 Nov 2013 14:50:41 +0000 (11:50 -0300)]
perf timechart: Move all_data per_pid list to 'struct timechart'
Removing another global variable.
This one tho would be better done by using the machine infrastructure,
searching for the 'struct thread' with a pid, then using thread->priv,
etc.
TODO list material for now.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <stfomichev@yandex-team.ru>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-yyfpudgjvr6mev4bue9u72a2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 28 Nov 2013 14:25:19 +0000 (11:25 -0300)]
perf timechart: Introduce tool struct
To avoid having all those global variables and to use the interface to
event processing that is based on passing a 'perf_tool' struct that
should be embedded in a per tool specific struct passed to all the
sample processing callbacks.
There are some more globals to move, next patches will do it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <stfomichev@yandex-team.ru>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-0iah65pq796ezbk5u1lzwy1k@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 28 Nov 2013 10:30:17 +0000 (11:30 +0100)]
perf tools: Add perf_data_file__write interface
Adding perf_data_file__write interface to centralize output to files.
The function prototype is:
ssize_t perf_data_file__write(struct perf_data_file *file,
void *buf, size_t size);
Returns number of bytes written or -1 in case of error.
NOTE: Also indenting 'struct perf_data_file' members, no functional
change done.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1385634619-8129-6-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 28 Nov 2013 10:30:16 +0000 (11:30 +0100)]
perf tools: Add writen function
Adding 'writen' function as a synchronous wrapper for write syscall with
following prototype:
ssize_t writen(int fd, void *buf, size_t n)
Returns the number of bytes written on success or -1 in case of err.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Requested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1385634619-8129-5-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 28 Nov 2013 10:30:15 +0000 (11:30 +0100)]
perf tools: Fine tune readn function
Added a 'left' variable to make the flow clearer, and added a debug
check for the return value - returning 'n' is more obvious.
Added small comment for readn.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Original-patch-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1385634619-8129-4-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 28 Nov 2013 10:30:14 +0000 (11:30 +0100)]
perf tools: Use correct return type for readn function
Changing readn function return type to ssize_t because read returns
ssize_t not int.
Changing callers holding variable types as well.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1385634619-8129-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 28 Nov 2013 10:30:13 +0000 (11:30 +0100)]
perf record: Unify data output code into perf_record__write function
Unifying current 2 data output functions do_write_output and
write_output into single one perf_record__write.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1385634619-8129-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Sat, 30 Nov 2013 12:42:48 +0000 (13:42 +0100)]
Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
* Make per-cpu mmaps the default in 'perf record', from Adrian Hunter.
* Default -t/--thread 'perf record' option to no inheritance,
from Adrian Hunter.
* Make 'perf top -g' refer to callchains, for consistency with other tools,
from David Ahern.
* Skip ignored symbols while printing callchain, from David Ahern.
* Print callchains and symbols if they exist in 'perf script',
from David Ahern.
* Remove thread summary coloring in 'perf trace', from Pekka Enberg.
* zsh completion support, from Ramkumar Ramachandra.
* 'perf timechart' improvements, including backtrace support,
from Stanislav Fomichev.
* Fix using kcore files stored in the buildid cache when doing report/annotate
in non-live sessions, from Adrian Hunter
* Minor 'timechart' cleanups.
* Fix tags/TAGS targets rebuilding, from Jiri Olsa.
* Add options to show comm, fork, exit and mmap PERF_RECORD_ events in
'perf script', from Namhyung Kim.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Jiri Olsa [Tue, 26 Nov 2013 12:54:12 +0000 (13:54 +0100)]
perf tools: Fix tags/TAGS targets rebuilding
Once the tags/TAGS file is generated it's never rebuilt until it's
removed by hand.
The reason is that the Makefile does not treat tags/TAGS as targets but
as files and thus won't rebuilt them once they are in place.
Adding PHONY tags/TAGS targets into Makefile.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20131126125412.GJ1267@krava.brq.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 27 Nov 2013 19:32:56 +0000 (16:32 -0300)]
perf timechart: Remove misplaced __maybe_unused
The 'event' parameter _is_ used.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <stfomichev@yandex-team.ru>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-`ranpwd
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 27 Nov 2013 19:29:50 +0000 (16:29 -0300)]
perf timechart: Remove some needless struct forward declarations
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <stfomichev@yandex-team.ru>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-jomi6mjv5zi9vsn4vmih5xps@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stanislav Fomichev [Wed, 27 Nov 2013 10:45:00 +0000 (14:45 +0400)]
perf timechart: dynamically determine event fields offset
Since
b000c8065a92 "tracing: Remove the extra 4 bytes of padding in
events" removed padding bytes, perf timechart got out of sync with the
kernel's trace_entry structure.
Convert perf timechart to use dynamic fields offsets (via
perf_evsel__intval) not relying on a hardcoded copy of fields layout
from the kernel.
Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Chia-I Wu <olvaffe@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/20131127104459.GB3309@stfomichev-desktop
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Tue, 26 Nov 2013 13:19:24 +0000 (15:19 +0200)]
perf symbols: Fix not finding kcore in buildid cache
The logic was not looking in the buildid cache for kcore if the host
kernel buildid did not match the recorded kernel buildid.
This affects the non-live case i.e. the kernel has changed and we are
looking at a special copy of kcore that we placed in the buildid cache
(using "perf buildid-cache -v -k /proc/kcore") when the data was
recorded.
After this fix kernel symbols get resolved/annotated correctly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1385471964-4037-1-git-send-email-adrian.hunter@intel.com
[ Added further explanation extracted from conversation between Ingo & Adrian on lkml ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 26 Nov 2013 08:54:26 +0000 (17:54 +0900)]
perf script: Print mmap[2] events also
If --show-mmap-events option is given, also print internal MMAP and
MMAP2 events. It would be helpful for debugging.
$ perf script --show-mmap-events
...
sleep 9486 [009]
3350640.335531: PERF_RECORD_MMAP 9486/9486: [0x400000(0x6000) @ 0]: x /usr/bin/sleep
sleep 9486 [009]
3350640.335542: PERF_RECORD_MMAP 9486/9486: [0x3153a00000(0x223000) @ 0]: x /usr/lib64/ld-2.17.so
sleep 9486 [009]
3350640.335553: PERF_RECORD_MMAP 9486/9486: [0x7fff8b5fe000(0x2000) @ 0x7fff8b5fe000]: x [vdso]
sleep 9486 [009]
3350640.335643: PERF_RECORD_MMAP 9486/9486: [0x3153e00000(0x3c0000) @ 0]: x /usr/lib64/libc-2.17.so
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Suggested-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1385456066-26592-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 26 Nov 2013 08:51:12 +0000 (17:51 +0900)]
perf script: Print comm, fork and exit events also
If --show-task-events option is given, also print internal COMM, FORK
and EXIT events. It would be helpful for debugging.
$ perf script --show-task-events
...
swapper 0 [009]
3350640.335261: sched:sched_switch: prev_comm=swapper/9
sleep 9486 [009]
3350640.335509: PERF_RECORD_COMM: sleep:9486
sleep 9486 [009]
3350640.335806: sched:sched_stat_runtime: comm=sleep pid=9486
firefox 2635 [003]
3350641.275896: PERF_RECORD_FORK(2635:9487):(2635:2635)
firefox 2635 [003]
3350641.275896: sched:sched_process_fork: comm=firefox pid=2635
sleep 9486 [009]
3350641.336009: PERF_RECORD_EXIT(9486:9486):(9486:9486)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Suggested-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1385455873-25865-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Wed, 20 Nov 2013 04:07:37 +0000 (21:07 -0700)]
perf script: Print callchains and symbols if they exist
The intent of perf-script is to dump the events and information in the
file. H/W, S/W and raw events all dump callchains if they are present;
might as well make that the default for tracepoints too.
v2: Only add options for sym, dso and ip if callchains are present
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1384920457-5986-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Mon, 18 Nov 2013 20:32:48 +0000 (13:32 -0700)]
perf tools: Export setup_list
Used in upcoming patches (perf sched timehist command).
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1384806771-2945-6-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Mon, 18 Nov 2013 20:32:47 +0000 (13:32 -0700)]
perf thread: Move comm_list check into function
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1384806771-2945-5-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Mon, 18 Nov 2013 20:32:45 +0000 (13:32 -0700)]
perf symbols: Move idle syms check from top to generic function
Allows list of idle symbols to be leveraged by other commands, such as
the upcoming timehist command.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1384806771-2945-3-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Mon, 18 Nov 2013 20:32:44 +0000 (13:32 -0700)]
perf evsel: Skip ignored symbols while printing callchain
Allows a command to have a symbol_filter controlled by the user to skip
certain functions in a backtrace. One example is to allow the user to
reduce repeating patterns like:
do_select core_sys_select sys_select
to just sys_select when dumping callchains, consuming less real estate
on the screen while still conveying the essential message - the process
is in a select call.
This option is leveraged by the upcoming timehist command.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1384806771-2945-2-git-send-email-dsahern@gmail.com
[ Checked if al.sym is NULL before touching al.sym->ignored, as noted by Adrian Hunter ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stanislav Fomichev [Fri, 1 Nov 2013 16:25:51 +0000 (20:25 +0400)]
perf timechart: Add backtrace support
Add -g flag to `perf timechart record` which saves callchain info in the
perf.data.
When generating SVG, add backtrace information to the figure details, so
now it's possible to see which code path woke up the task and why some
task went to sleep.
Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1383323151-19810-8-git-send-email-stfomichev@yandex-team.ru
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stanislav Fomichev [Fri, 1 Nov 2013 16:25:50 +0000 (20:25 +0400)]
perf timechart: Add support for -P and -T in timechart recording
If we don't want either power or task events we may use -T or -P with
the `perf timechart record` command to filter out events while recording
to keep perf.data small.
Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1383323151-19810-7-git-send-email-stfomichev@yandex-team.ru
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stanislav Fomichev [Fri, 1 Nov 2013 16:25:49 +0000 (20:25 +0400)]
perf timechart: Group figures and add title with details
Add titles to figures so we can run SVG interactively in Firefox and
check event details in the tooltips.
This also aids exploring SVG with Inkscape because when user clicks on
one part of logical figure, all parts are selected.
It's also possible to read titles with Inkscape in the object details.
Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1383323151-19810-6-git-send-email-stfomichev@yandex-team.ru
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stanislav Fomichev [Fri, 1 Nov 2013 16:25:48 +0000 (20:25 +0400)]
perf timechart: Add support for displaying only tasks related data
In order to make SVG smaller and faster to browse add possibility to
switch off power related information with -T switch.
Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1383323151-19810-5-git-send-email-stfomichev@yandex-team.ru
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stanislav Fomichev [Fri, 1 Nov 2013 16:25:47 +0000 (20:25 +0400)]
perf timechart: Use proc_num to implement --power-only
Don't use special flag to indicate power-only mode, just set proc_num to
0.
Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1383323151-19810-4-git-send-email-stfomichev@yandex-team.ru
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stanislav Fomichev [Fri, 1 Nov 2013 16:25:46 +0000 (20:25 +0400)]
perf timechart: Add option to limit number of tasks
Add -n option to specify min. number of tasks to print.
Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1383323151-19810-3-git-send-email-stfomichev@yandex-team.ru
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stanislav Fomichev [Fri, 1 Nov 2013 16:25:45 +0000 (20:25 +0400)]
perf timechart: Always try to print at least 15 tasks
Always try to print at least 15 tasks no matter how long they run.
Signed-off-by: Stanislav Fomichev <stfomichev@yandex-team.ru>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1383323151-19810-2-git-send-email-stfomichev@yandex-team.ru
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Mon, 18 Nov 2013 09:55:57 +0000 (11:55 +0200)]
perf record: Default -t option to no inheritance
The change to per-cpu mmaps causes the -p, -t and -u options now to have
inheritance enabled by default. Change that back to no inheritance but
for the -t option only.
Requested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1384768557-23331-5-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Mon, 18 Nov 2013 09:55:56 +0000 (11:55 +0200)]
perf tools: Add option macro OPT_BOOLEAN_SET
OPT_BOOLEAN_SET records whether a boolean option was set by the user.
That information can be used to change the default value for the option
after the options have been parsed.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1384768557-23331-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Mon, 18 Nov 2013 09:55:55 +0000 (11:55 +0200)]
perf tools: Allow '--inherit' as the negation of '--no-inherit'
Long options can be negated by prefixing them with 'no-'. However
options that already start with 'no-', such as '--no-inherit' result in
ugly double 'no's.
Avoid that by accepting that the removal of 'no-' also negates the long
option.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1384768557-23331-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adrian Hunter [Fri, 15 Nov 2013 13:52:29 +0000 (15:52 +0200)]
perf record: Make per-cpu mmaps the default.
This affects the -p, -t and -u options that previously defaulted to
per-thread mmaps.
Consequently add an option to select per-thread mmaps to support the old
behaviour.
Note that per-thread can be used with a workload-only (i.e. none of -p,
-t, -u, -a or -C is selected) to get a per-thread mmap with no
inheritance.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/5286271D.3020808@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Mon, 18 Nov 2013 05:34:52 +0000 (14:34 +0900)]
perf script: Move evname print code to process_event()
The print_sample_start() will be reused by other printing routine for
internal events like COMM, FORK and EXIT from next patch. And because
they're not tied to a specific event, move the evname print code to its
caller.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1384752894-10974-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ramkumar Ramachandra [Sun, 17 Nov 2013 16:13:27 +0000 (21:43 +0530)]
perf completion: Rename file to reflect zsh support
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1384704807-15779-6-git-send-email-artagnon@gmail.com
[ Fix 'make install' target ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ramkumar Ramachandra [Sun, 17 Nov 2013 16:13:26 +0000 (21:43 +0530)]
perf completion: Introduce zsh support
__perfcomp(), __perfcomp_colon(), and _perf() have to be overridden.
Inspired by the way the git.git completion system is structured.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1384704807-15779-5-git-send-email-artagnon@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ramkumar Ramachandra [Sun, 17 Nov 2013 16:13:25 +0000 (21:43 +0530)]
perf completion: Factor out call to __ltrim_colon_completions
In our sole callsite, __ltrim_colon_completions is called after
__perfcomp, to modify the COMPREPLY set by the invocation.
This is problematic, because in the zsh equivalent (using compset/
compadd), we'll have to generate completions in one-shot.
So factor out this entire callsite into a special override'able
__perfcomp_colon function; we will override it when introducing zsh
support.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1384704807-15779-4-git-send-email-artagnon@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ramkumar Ramachandra [Sun, 17 Nov 2013 16:13:24 +0000 (21:43 +0530)]
perf completion: Factor out compgen stuff
compgen is a bash-builtin; factor out the invocations into a separate
function to give us a chance to override it with a zsh equivalent in
future patches.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1384704807-15779-3-git-send-email-artagnon@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ramkumar Ramachandra [Sun, 17 Nov 2013 16:13:23 +0000 (21:43 +0530)]
perf completion: Introduce a layer of indirection
Define the variables cur, words, cword, and prev outside the main
completion function so that we have a chance to override it when we
introduce zsh support.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/r/1384704807-15779-2-git-send-email-artagnon@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Fri, 15 Nov 2013 03:51:30 +0000 (20:51 -0700)]
perf top: Make -g refer to callchains
In most commands -g is used for callchains. Make perf-top follow suit.
Move group to just --group with no short cut making it similar to
perf-record.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1384487490-6865-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pekka Enberg [Thu, 14 Nov 2013 16:43:30 +0000 (18:43 +0200)]
perf trace: Remove thread summary coloring
Thread summary line coloring looks ugly. It doesn't add much value so
remove coloring completely.
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Acked-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1384447410-1771-1-git-send-email-penberg@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Steven Rostedt [Tue, 19 Nov 2013 23:29:37 +0000 (18:29 -0500)]
tools lib traceevent: Use helper trace-seq in print functions like kernel does
Jiri Olsa reported that his plugin for scsi was chopping off part of the
output. Investigating this, I found that Jiri used the same functions as
what is in the kernel, which adds the following:
trace_seq_putc(p, 0);
This adds a '\0' to the output string. The reason this works in the
kernel is that the "p" that is passed to the function helper is a
temporary trace_seq. But in the libtraceevent library, it's the pointer
to the trace_seq used to output. By adding the '\0', it truncates the
line and nothing added after that will be printed.
We can solve this in two ways. One is to have the helper functions for
the library not add the unnecessary '\0'. The other is to change the
library to also use a helper trace_seq structure that gets copied to the
main trace_seq just like the kernel does.
The latter allows the helper functions in the plugins to be the same as
the kernel, which is the better solution.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20131119182937.401668e3@gandalf.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stephane Eranian [Tue, 12 Nov 2013 16:58:51 +0000 (17:58 +0100)]
perf/x86: Add RAPL hrtimer support
The RAPL PMU counters do not interrupt on overflow.
Therefore, the kernel needs to poll the counters
to avoid missing an overflow. This patch adds
the hrtimer code to do this.
The timer interval is calculated at boot time
based on the power unit used by the HW.
There is one hrtimer per-cpu to handle the case
of multiple simultaneous use across cores on
the same package + hotplug CPU.
Thanks to Maria Dimakopoulou for her contributions
to this patch especially on the math aspects.
Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
[ Applied 32-bit build fix. ]
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: acme@redhat.com
Cc: jolsa@redhat.com
Cc: zheng.z.yan@intel.com
Cc: bp@alien8.de
Cc: maria.n.dimakopoulou@gmail.com
Link: http://lkml.kernel.org/r/1384275531-10892-5-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Stephane Eranian [Tue, 12 Nov 2013 16:58:50 +0000 (17:58 +0100)]
perf/x86: Add Intel RAPL PMU support
This patch adds a new uncore PMU to expose the Intel
RAPL energy consumption counters. Up to 3 counters,
each counting a particular RAPL event are exposed.
The RAPL counters are available on Intel SandyBridge,
IvyBridge, Haswell. The server skus add a 3rd counter.
The following events are available and exposed in sysfs:
- power/energy-cores: power consumption of all cores on socket
- power/energy-pkg: power consumption of all cores + LLc cache
- power/energy-dram: power consumption of DRAM (servers only)
For each event both the unit (Joules) and scale (2^-32 J)
is exposed in sysfs for use by perf stat and other tools.
The files are:
/sys/devices/power/events/energy-*.unit
/sys/devices/power/events/energy-*.scale
The RAPL PMU is uncore by nature and is implemented such
that it only works in system-wide mode. Measuring only
one CPU per socket is sufficient. The /sys/devices/power/cpumask
file can be used by tools to figure out which CPUs to monitor
by default. For instance, on a 2-socket system, 2 CPUs
(one on each socket) will be shown.
All the counters measure in the same unit (exposed via sysfs).
The perf_events API exposes all RAPL counters as 64-bit integers
counting in unit of 1/2^32 Joules (about 0.23 nJ). User level tools
must convert the counts by multiplying them by 2^-32 to obtain
Joules. The reason for this is that the kernel avoids
doing floating point math whenever possible because it is
expensive (user floating-point state must be saved). The method
used avoids kernel floating-point usage. There is no loss of
precision. Thanks to PeterZ for suggesting this approach.
To convert the raw count in Watt:
W = C * 2.3 / (1e10 * time)
or ldexp(C, -32).
RAPL PMU is a new standalone PMU which registers with the
perf_event core subsystem. The PMU type (attr->type) is
dynamically allocated and is available from /sys/device/power/type.
Sampling is not supported by the RAPL PMU. There is no
privilege level filtering either.
Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: acme@redhat.com
Cc: jolsa@redhat.com
Cc: zheng.z.yan@intel.com
Cc: bp@alien8.de
Link: http://lkml.kernel.org/r/1384275531-10892-4-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Stephane Eranian [Tue, 12 Nov 2013 16:58:49 +0000 (17:58 +0100)]
tools/perf/stat: Add event unit and scale support
This patch adds perf stat support for handling event units and
scales as exported by the kernel.
The kernel can export PMU events actual unit and scaling factor
via sysfs:
$ ls -1 /sys/devices/power/events/energy-*
/sys/devices/power/events/energy-cores
/sys/devices/power/events/energy-cores.scale
/sys/devices/power/events/energy-cores.unit
/sys/devices/power/events/energy-pkg
/sys/devices/power/events/energy-pkg.scale
/sys/devices/power/events/energy-pkg.unit
$ cat /sys/devices/power/events/energy-cores.scale
2.
3283064365386962890625e-10
$ cat cat /sys/devices/power/events/energy-cores.unit
Joules
This patch modifies the pmu event alias code to check
for the presence of the .unit and .scale files to load
the corresponding values. They are then used by perf stat
transparently:
# perf stat -a -e power/energy-pkg/,power/energy-cores/,cycles -I 1000 sleep 1000
# time counts unit events
1.
000214717 3.07 Joules power/energy-pkg/ [100.00%]
1.
000214717 0.53 Joules power/energy-cores/
1.
000214717 12965028 cycles [100.00%]
2.
000749289 3.01 Joules power/energy-pkg/
2.
000749289 0.52 Joules power/energy-cores/
2.
000749289 15817043 cycles
When the event does not have an explicit unit exported by
the kernel, nothing is printed. In csv output mode, there
will be an empty field.
Special thanks to Jiri for providing the supporting code
in the parser to trigger reading of the scale and unit files.
Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: zheng.z.yan@intel.com
Cc: bp@alien8.de
Cc: maria.n.dimakopoulou@gmail.com
Cc: acme@redhat.com
Link: http://lkml.kernel.org/r/1384275531-10892-3-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Stephane Eranian [Tue, 12 Nov 2013 16:58:48 +0000 (17:58 +0100)]
perf: Add active_entry list head to struct perf_event
This patch adds a new field to the struct perf_event.
It is intended to be used to chain events which are
active (enabled). It helps in the hardware layer
for PMUs which do not have actual counter restrictions, i.e.,
free running read-only counters. Active events are chained
as opposed to being tracked via the counter they use.
To save space we use a union with hlist_entry as both
are mutually exclusive (suggested by Jiri Olsa).
Signed-off-by: Stephane Eranian <eranian@google.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: acme@redhat.com
Cc: jolsa@redhat.com
Cc: zheng.z.yan@intel.com
Cc: bp@alien8.de
Cc: maria.n.dimakopoulou@gmail.com
Link: http://lkml.kernel.org/r/1384275531-10892-2-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ingo Molnar [Thu, 21 Nov 2013 08:59:27 +0000 (09:59 +0100)]
Merge branch 'uprobes/core' of git://git./linux/kernel/git/oleg/misc into perf/core
Pull uprobes cleanups from Oleg Nesterov.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Oleg Nesterov [Tue, 19 Nov 2013 16:20:21 +0000 (17:20 +0100)]
uprobes: Document xol_area and arch_uprobe->insn/ixol
Document xol_area and arch_uprobe.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Oleg Nesterov [Sat, 9 Nov 2013 18:49:39 +0000 (19:49 +0100)]
uprobes: Cleanup !CONFIG_UPROBES decls, unexport xol_area
1. Don't include asm/uprobes.h unconditionally, we only need
it if CONFIG_UPROBES.
2. Move the definition of "struct xol_area" into uprobes.c.
Perhaps we should simply kill struct uprobes_state, it buys
nothing.
3. Kill the dummy definition of uprobe_get_swbp_addr(), nobody
except handle_swbp() needs it.
4. Purely cosmetic, but move the decl of uprobe_get_swbp_addr()
up, close to other __weak helpers.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Oleg Nesterov [Sat, 9 Nov 2013 17:44:19 +0000 (18:44 +0100)]
uprobes/powerpc: Kill arch_uprobe->ainsn
powerpc has both arch_uprobe->insn and arch_uprobe->ainsn to
make the generic code happy. This is no longer needed after
the previous change, powerpc can just use "u32 insn".
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Oleg Nesterov [Sat, 9 Nov 2013 16:58:54 +0000 (17:58 +0100)]
uprobes: Don't assume that arch_uprobe->insn/ixol is u8[MAX_UINSN_BYTES]
arch_uprobe should be opaque as much as possible to the generic
code, but currently it assumes that insn/ixol must be u8[] of the
known size. Remove this unnecessary dependency, we can use "&" and
and sizeof() with the same effect.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Oleg Nesterov [Fri, 8 Nov 2013 17:52:21 +0000 (18:52 +0100)]
uprobes: Add uprobe_task->dup_xol_work/dup_xol_addr
uprobe_task->vaddr is a bit strange. The generic code uses it only
to pass the additional argument to arch_uprobe_pre_xol(), and since
it is always equal to instruction_pointer() this looks even more
strange.
And both utask->vaddr and and utask->autask have the same scope,
they only have the meaning when the task executes the probed insn
out-of-line, so it is safe to reuse both in UTASK_RUNNING state.
This all means that logically ->vaddr belongs to arch_uprobe_task
and we should probably move it there, arch_uprobe_pre_xol() can
record instruction_pointer() itself.
OTOH, it is also used by uprobe_copy_process() and dup_xol_work()
for another purpose, this doesn't look clean and doesn't allow to
move this member into arch_uprobe_task.
This patch adds the union with 2 anonymous structs into uprobe_task.
The first struct is autask + vaddr, this way we "almost" move vaddr
into autask.
The second struct has 2 new members for uprobe_copy_process() paths:
->dup_xol_addr which can be used instead ->vaddr, and ->dup_xol_work
which can be used to avoid kmalloc() and simplify the code.
Note that this union will likely have another member(s), we need
something like "private_data_for_handlers" so that the tracing
handlers could use it to communicate with call_fetch() methods.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Ingo Molnar [Wed, 20 Nov 2013 13:29:46 +0000 (14:29 +0100)]
Merge tag 'perf-urgent-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
* Tag thread comm as overriden, showing the right comm for threads after forks.
(Frederic Weisbecker)
* Fix memory leak when processing perf.data file header. (Namhyung Kim.)
* Don't try to free string constant used for anonymous event groups. (Namhyung Kim)
* Fix use of multiple options in processing field in libtraceevent. (Steven Rostedt)
* Fix conversion of pointer to integer of different size in libtraceevent.
(Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Arnaldo Carvalho de Melo [Tue, 19 Nov 2013 19:14:51 +0000 (16:14 -0300)]
tools lib traceevent: Fix conversion of pointer to integer of different size
gcc complaint on 32-bit system:
/home/acme/git/linux/tools/lib/traceevent/event-parse.c: In function ‘eval_num_arg’:
/home/acme/git/linux/tools/lib/traceevent/event-parse.c:3468:9: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
This is because the eval_num_arg returns everything as an 'unsigned long long',
so it converts a void pointer to a wider integer, fix it by converting the void
pointer to an integer of the same size, 'unsigned long', before casting it to
'unsigned long long'.
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-yllx4aqcg06v5n4vjpwiiuld@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Vince Weaver [Fri, 15 Nov 2013 17:39:45 +0000 (12:39 -0500)]
perf/trace: Properly use u64 to hold event_id
The 64-bit attr.config value for perf trace events was being copied into
an "int" before doing a comparison, meaning the top 32 bits were
being truncated.
As far as I can tell this didn't cause any errors, but it did mean
it was possible to create valid aliases for all the tracepoint ids
which I don't think was intended. (For example, 0xffffffff00000018
and 0x18 both enable the same tracepoint).
Signed-off-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1311151236100.11932@vincent-weaver-1.um.maine.edu
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Fri, 13 Sep 2013 11:14:47 +0000 (13:14 +0200)]
perf: Remove fragile swevent hlist optimization
Currently we only allocate a single cpu hashtable for per-cpu
swevents; do away with this optimization for it is fragile in the face
of things like perf_pmu_migrate_context().
The easiest thing is to make sure all CPUs are consistent wrt state.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20130913111447.GN31370@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Peter Zijlstra [Thu, 14 Nov 2013 15:23:04 +0000 (16:23 +0100)]
ftrace, perf: Avoid infinite event generation loop
Vince's perf-trinity fuzzer found yet another 'interesting' problem.
When we sample the irq_work_exit tracepoint with period==1 (or
PERF_SAMPLE_PERIOD) and we add an fasync SIGNAL handler we create an
infinite event generation loop:
,-> <IPI>
| irq_work_exit() ->
| trace_irq_work_exit() ->
| ...
| __perf_event_overflow() -> (due to fasync)
| irq_work_queue() -> (irq_work_list must be empty)
'--------- arch_irq_work_raise()
Similar things can happen due to regular poll() wakeups if we exceed
the ring-buffer wakeup watermark, or have an event_limit.
To avoid this, dis-allow sampling this particular tracepoint.
In order to achieve this, create a special perf_perm function pointer
for each event and call this (when set) on trying to create a
tracepoint perf event.
[ roasted: use expr... to allow for ',' in your expression ]
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Dave Jones <davej@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20131114152304.GC5364@laptop.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Steven Rostedt [Mon, 18 Nov 2013 19:23:14 +0000 (14:23 -0500)]
tools lib traceevent: Fix use of multiple options in processing field
Jiri Olsa reported that the scsi_dispatch_cmd_done event failed to parse
with:
Error: expected type 5 but read 4
Error: expected type 5 but read 4
The problem is with this part of the print_fmt:
__print_symbolic(((REC->result) >> 24) & 0xff, ...
The __print_symbolic() helper function's first parameter is the field to
use to determine what symbol to print based on the value of the result.
The parser can handle one operation, but it can not handle multiple
operations ('>>' and '&').
Add code to process all operations for the field argument for
__print_symbolic() as well as __print_flags().
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20131118142314.27ca334b@gandalf.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Mon, 18 Nov 2013 02:20:44 +0000 (11:20 +0900)]
perf header: Fix possible memory leaks in process_group_desc()
After processing all group descriptors or encountering an error, it
frees all descriptors. However, current logic can leak memory since it
might not traverse all descriptors.
Note that the 'i' can have different value than nr_groups when an error
occurred and it's safe to call free(desc[i].name) for every desc since
we already make it NULL when it's reused for group names.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1384741244-7271-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Mon, 18 Nov 2013 02:20:43 +0000 (11:20 +0900)]
perf header: Fix bogus group name
When processing event group descriptor in perf file header, we reuse an
allocated group name but forgot to prevent it from freeing.
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1384741244-7271-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Frederic Weisbecker [Sat, 16 Nov 2013 01:02:09 +0000 (02:02 +0100)]
perf tools: Tag thread comm as overriden
The problem is that when a thread overrides its default ":%pid" comm, we
forget to tag the thread comm as overriden. Hence, this overriden comm
is not inherited on future forks. Fix it.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20131116010207.GA18855@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Al Viro [Tue, 19 Nov 2013 01:20:43 +0000 (01:20 +0000)]
seq_file: always clear m->count when we free m->buf
Once we'd freed m->buf, m->count should become zero - we have no valid
contents reachable via m->buf.
Reported-by: Charley (Hao Chuan) Chu <charley.chu@broadcom.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 18 Nov 2013 23:56:13 +0000 (15:56 -0800)]
Merge git://www.linux-watchdog.org/linux-watchdog
Pull watchdog changes from Wim Van Sebroeck:
- addition of MOXA ART watchdog driver (moxart_wdt)
- addition of CSR SiRFprimaII and SiRFatlasVI watchdog driver
(sirfsoc_wdt)
- addition of ralink watchdog driver (rt2880_wdt)
- various fixes and cleanups (__user annotation, ioctl return codes,
removal of redundant of_match_ptr, removal of unnecessary
amba_set_drvdata(), use allocated buffer for usb_control_msg, ...)
- removal of MODULE_ALIAS_MISCDEV statements
- watchdog related DT bindings
- first set of improvements on the w83627hf_wdt driver
* git://www.linux-watchdog.org/linux-watchdog: (26 commits)
watchdog: w83627hf: Use helper functions to access superio registers
watchdog: w83627hf: Enable watchdog device only if not already enabled
watchdog: w83627hf: Enable watchdog only once
watchdog: w83627hf: Convert to watchdog infrastructure
watchdog: omap_wdt: raw read and write endian fix
watchdog: sirf: don't depend on dummy value of CLOCK_TICK_RATE
watchdog: pcwd_usb: overflow in usb_pcwd_send_command()
watchdog: rt2880_wdt: fix return value check in rt288x_wdt_probe()
watchdog: watchdog_core: Fix a trivial typo
watchdog: dw: Enable OF support for DW watchdog timer
watchdog: Get rid of MODULE_ALIAS_MISCDEV statements
watchdog: ts72xx_wdt: Propagate return value from timeout_to_regval
watchdog: pcwd_usb: Use allocated buffer for usb_control_msg
watchdog: sp805_wdt: Remove unnecessary amba_set_drvdata()
watchdog: sirf: add watchdog driver of CSR SiRFprimaII and SiRFatlasVI
watchdog: Remove redundant of_match_ptr
watchdog: ts72xx_wdt: cleanup return codes in ioctl
documentation/devicetree: Move DT bindings from gpio to watchdog
watchdog: add ralink watchdog driver
watchdog: Add MOXA ART watchdog driver
...
Linus Torvalds [Mon, 18 Nov 2013 23:50:07 +0000 (15:50 -0800)]
Merge branch 'i2c/for-next' of git://git./linux/kernel/git/wsa/linux
Pull i2c changes from Wolfram Sang:
- new drivers for exynos5, bcm kona, and st micro
- bigger overhauls for drivers mxs and rcar
- typical driver bugfixes, cleanups, improvements
- got rid of the superfluous 'driver' member in i2c_client struct This
touches a few drivers in other subsystems. All acked.
* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits)
i2c: bcm-kona: fix error return code in bcm_kona_i2c_probe()
i2c: i2c-eg20t: do not print error message in syslog if no ACK received
i2c: bcm-kona: Introduce Broadcom I2C Driver
i2c: cbus-gpio: Fix device tree binding
i2c: wmt: add missing clk_disable_unprepare() on error
i2c: designware: add new ACPI IDs
i2c: i801: Add Device IDs for Intel Wildcat Point-LP PCH
i2c: exynos5: Remove incorrect clk_disable_unprepare
i2c: i2c-st: Add ST I2C controller
i2c: exynos5: add High Speed I2C controller driver
i2c: rcar: fixup rcar type naming
i2c: scmi: remove some bogus NULL checks
i2c: sh_mobile & rcar: Enable the driver on all ARM platforms
i2c: sh_mobile: Convert to clk_prepare/unprepare
i2c: mux: gpio: use reg value for i2c_add_mux_adapter
i2c: mux: gpio: use gpio_set_value_cansleep()
i2c: Include linux/of.h header
i2c: mxs: Fix PIO mode on i.MX23
i2c: mxs: Rework the PIO mode operation
i2c: mxs: distinguish i.MX23 and i.MX28 based I2C controller
...
Linus Torvalds [Mon, 18 Nov 2013 23:36:04 +0000 (15:36 -0800)]
Merge tag 'rdma-for-linus' of git://git./linux/kernel/git/roland/infiniband
Pull infiniband/rdma updates from Roland Dreier:
- Re-enable flow steering verbs with new improved userspace ABI
- Fixes for slow connection due to GID lookup scalability
- IPoIB fixes
- Many fixes to HW drivers including mlx4, mlx5, ocrdma and qib
- Further improvements to SRP error handling
- Add new transport type for Cisco usNIC
* tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (66 commits)
IB/core: Re-enable create_flow/destroy_flow uverbs
IB/core: extended command: an improved infrastructure for uverbs commands
IB/core: Remove ib_uverbs_flow_spec structure from userspace
IB/core: Use a common header for uverbs flow_specs
IB/core: Make uverbs flow structure use names like verbs ones
IB/core: Rename 'flow' structs to match other uverbs structs
IB/core: clarify overflow/underflow checks on ib_create/destroy_flow
IB/ucma: Convert use of typedef ctl_table to struct ctl_table
IB/cm: Convert to using idr_alloc_cyclic()
IB/mlx5: Fix page shift in create CQ for userspace
IB/mlx4: Fix device max capabilities check
IB/mlx5: Fix list_del of empty list
IB/mlx5: Remove dead code
IB/core: Encorce MR access rights rules on kernel consumers
IB/mlx4: Fix endless loop in resize CQ
RDMA/cma: Remove unused argument and minor dead code
RDMA/ucma: Discard events for IDs not yet claimed by user space
IB/core: Add Cisco usNIC rdma node and transport types
RDMA/nes: Remove self-assignment from nes_query_qp()
IB/srp: Report receive errors correctly
...
projects / openwrt / staging / blogic.git / log