openwrt/staging/jogo.git
5 years agomac80211: remove TX_NEEDS_ALIGNED4_SKBS patch
Felix Fietkau [Mon, 19 Aug 2019 17:14:17 +0000 (19:14 +0200)]
mac80211: remove TX_NEEDS_ALIGNED4_SKBS patch

The intended performance benefit could not be reliably reproduced, and the
patch was not accepted upstream

Signed-off-by: Felix Fietkau <nbd@nbd.name>
5 years agoscripts/dl_github_archive.py: fix python3 transition
Yousong Zhou [Mon, 19 Aug 2019 13:39:18 +0000 (13:39 +0000)]
scripts/dl_github_archive.py: fix python3 transition

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
5 years agoelfutils: bump to 0.177
Luiz Angelo Daros de Luca [Mon, 19 Aug 2019 03:09:05 +0000 (00:09 -0300)]
elfutils: bump to 0.177

200-uclibc-ng-compat.patch is upstream now.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
5 years agomac80211: rt2x00: clear IV's on start to fix AP mode regression
Daniel Golle [Mon, 19 Aug 2019 11:40:51 +0000 (13:40 +0200)]
mac80211: rt2x00: clear IV's on start to fix AP mode regression

To do not brake HW restart we should keep initialization vectors data.
I assumed that on start the data is already initialized to zeros, but
that not true on some scenarios and we should clear it. So add
additional flag to check if we are under HW restart and clear IV's
data if we are not.

Patch fixes AP mode regression.

Patch pending on linux-wireless and imported from patchwork.

Fixes: 0b2c42ced21a ("mac80211: Update to version 5.2-rc7")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
5 years agogcc: Update gcc 9.X to version 9.2.0
Hauke Mehrtens [Sun, 18 Aug 2019 23:02:43 +0000 (01:02 +0200)]
gcc: Update gcc 9.X to version 9.2.0

This updates the GCC version 9.X to version 9.2.0.
The removed patches are applied upstream.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years agomusl: Fix CVE-2019-14697
Hauke Mehrtens [Sun, 18 Aug 2019 21:24:43 +0000 (23:24 +0200)]
musl: Fix CVE-2019-14697

musl libc through 1.1.23 has an x87 floating-point stack adjustment
imbalance, related to the math/i386/ directory. In some cases, use of
this library could introduce out-of-bounds writes that are not present
in an application's source code.

This problem only affects x86 and no other architectures.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years agolinux-firmware: intel: Use recent version of wifi firmware
Hauke Mehrtens [Sun, 18 Aug 2019 20:16:34 +0000 (22:16 +0200)]
linux-firmware: intel: Use recent version of wifi firmware

iwlwifi from the new backports also supports more recent FW versions,
update to the most recent versions for already supported devices.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years agomac80211: ath10k: Fix crashes of QCA9984 when station connects
Hauke Mehrtens [Sun, 18 Aug 2019 19:12:52 +0000 (21:12 +0200)]
mac80211: ath10k: Fix crashes of QCA9984 when station connects

This fixes a bug introduced in backports from kernel 5.1 which makes
ath10k crash on QCA9984 when a station connects. The FW sends a airtime
report, but this station is not yet fully registered and a NULL pointer
is used.

Fixes: 0b2c42ced21a ("mac80211: Update to version 5.2-rc7")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years agoipq-wifi: drop upstreamed custom board-2.bin
Christian Lamparter [Sat, 17 Aug 2019 21:13:32 +0000 (23:13 +0200)]
ipq-wifi: drop upstreamed custom board-2.bin

The BDFs for the:
ALFA Network AP120C-AC
ASUS Lyra
AVM FRITZ!Box 7530
AVM FRITZ!Repeater 3000
EnGenius EAP1300
EnGenius ENS620EXT
Netgear Orbi Pro SRK60

boards were upstreamed to the ath10k-firmware repository
and linux-firmware.git.

Furthermore the BDFs for the:
OpenMesh A42 specific BDFs
OpenMesh A62 specific BDFs
Linksys EA6350v3
have been updated.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
5 years agolinux-firmware: update to 20190815
Christian Lamparter [Sat, 17 Aug 2019 21:03:41 +0000 (23:03 +0200)]
linux-firmware: update to 20190815

Update linux-firmware to 20190815

git log --pretty=oneline --abbrev-commit 20190815..20190815

07b925b Install only listed firmware files
5621bfc rtw88: add a README file
7e431c5 rtw88: RTL8822C: add WoW firmware v7.3
2dc7023 rtw88: RTL8822C: update rtw8822c_fw.bin to v7.3
d3d000d Merge branch 'ath10k-20190808' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware
d3e17e9 Merge branch 'for-upstream' of git://git.chelsio.net/pub/git/linux-firmware
d3f7234 Merge commit '70af908f4ad7aa8bc65032253f99a0a4fbe1e6c3' of https://github.com/Netronome/linux-firmware
1f0a99f ath10k: QCA9984 hw1.0: update board-2.bin
49c1187 ath10k: QCA9984 hw1.0: update firmware-5.bin to 10.4-3.9.0.2-00046
1031f01 ath10k: QCA988X hw2.0: update firmware-5.bin to 10.2.4-1.0-00045
cf714a2 ath10k: QCA9888 hw2.0: update board-2.bin
81e2e77 ath10k: QCA9888 hw2.0: update firmware-5.bin to 10.4-3.9.0.2-00040
8dc2dfb ath10k: QCA9887 hw1.0: update firmware-5.bin to 10.2.4-1.0-00045
1bd3ef2 ath10k: QCA6174 hw3.0: update firmware-6.bin to WLAN.RM.4.4.1-00140-QCARMSWPZ-1
e043109 ath10k: QCA4019 hw1.0: update board-2.bin
b1e26aa cxgb4: update firmware to revision 1.24.3.0
70af908 nfp: update Agilio SmartNIC flower firmware to rev AOTC-2.10.A.38
dff98c6 Merge branch 'master' of git://github.com/skeggsb/linux-firmware
580b076 Merge branch 'nxp_mc' of https://github.com/NXP/linux-firmware
f9b0071 Merge tag 'iwlwifi-fw-2019-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware
2a3b75d nvidia: add missing entries in WHENCE
6fc1eb1 linux-firmware: Update NXP Management Complex firmware to version 10.16.2
cd6cb7b iwlwifi: update -48 FWs for Qu and cc
b5f09bb iwlwifi: update FWs for 3168, 7265D, 9000, 9260, 8000, 8265 and cc
bf13a71 Merge branch 'guc_v33' of git://anongit.freedesktop.org/drm/drm-firmware
d52556e linux-firmware: Update firmware file for Intel Bluetooth AX201
dbcc2fb linux-firmware: Update firmware file for Intel Bluetooth 22161
a5ee415 linux-firmware: Update firmware file for Intel Bluetooth 9560
7444ca4 linux-firmware: Update firmware file for Intel Bluetooth 9260
3d1e553 amdgpu: update vega10 VCE firmware
5d4e3cc amdgpu: update picasso vcn firmware
6a45d9e amdgpu: update raven vcn firmware
9c8161f amdgpu: update tonga to latest 19.20 firmware
7b6c49c amdgpu: update vega12 to latest 19.20 firmware
4f7b71b amdgpu: partially revert 2579167548be33afb1fe2a9a5c141561ee5a8bbe
fd3cc24 amdgpu: update vega10 to latest 19.20 firmware
c190efa amdgpu: update polaris12 to latest 19.20 firmware
f42b54e amdgpu: update raven2 to latest 19.20 firmware
fc89ce8 amdgpu: update raven to latest 19.20 firmware
3bebb5a amdgpu: update picasso to latest 19.20 firmware
05dbae6 drm/i915/firmware: Add v33 of GuC for ICL
786f17a drm/i915/firmware: Add v33 of GuC for KBL
aae0eb5 drm/i915/firmware: Add v33 of GuC for SKL
9cf240f drm/i915/firmware: Add v33 of GuC for GLK
8a0a6a6 drm/i915/firmware: Add v33 of GuC for BXT
70e4394 linux-firmware: rsi: add firmware image for redpine 9116 chipset
fd69a5d linux-firmware: Add firmware file for Intel Bluetooth AX201
7ae3a09 Merge tag 'iwlwifi-fw-2019-06-20' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/linux-firmware
90e6845 iwlwifi: add new firmwares for integrated 22000 series
71ef30c iwlwifi: update FW for 22000 to Core45-96
e58cbf7 iwlwifi: update FWs for 9000 series to Core45-96
b443218 iwlwifi: update Core45 FWs for 22260, 9000 and 9260
5157165 iwlwifi: udpate -36 firmware for 8000 series

This commit was created with the help of the make-package-update-commit.sh script.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
5 years agoiftop: update to HEAD of 2018-10-03 - 77901c
Christian Lamparter [Sun, 18 Aug 2019 00:31:01 +0000 (02:31 +0200)]
iftop: update to HEAD of 2018-10-03 - 77901c

Update iftop to commit 77901c8c53e01359d83b8090aacfe62214658183

git log --pretty=oneline --abbrev-commit 949ed0f7..77901c8c

77901c8 Support scales beyond 1Gbps

Created with the help of the make-package-update-commit.sh script.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
5 years agouhttpd: update to latest Git HEAD
Jo-Philipp Wich [Sun, 18 Aug 2019 18:00:06 +0000 (20:00 +0200)]
uhttpd: update to latest Git HEAD

6b03f96 ubus: increase maximum ubus request size to 64KB

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
5 years agonghttp2: bump to 1.39.2
Hans Dedecker [Sun, 18 Aug 2019 16:54:47 +0000 (18:54 +0200)]
nghttp2: bump to 1.39.2

957abacf Bump up version number to 1.39.2, LT revision to 32:0:18
83d362c6 Don't read too greedily
a76d0723 Add nghttp2_option_set_max_outbound_ack
db2f612a nghttpx: Fix request stall

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
5 years agoltq-ifxos: refer to https://bugs.openwrt.org
Yousong Zhou [Sun, 18 Aug 2019 15:21:23 +0000 (15:21 +0000)]
ltq-ifxos: refer to https://bugs.openwrt.org

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
5 years agoct-bugcheck: report to https://openwrt.org by default
Yousong Zhou [Sun, 18 Aug 2019 15:19:57 +0000 (15:19 +0000)]
ct-bugcheck: report to https://openwrt.org by default

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
5 years agodownload.pl: use https://source.openwrt.org
Yousong Zhou [Sun, 18 Aug 2019 15:18:10 +0000 (15:18 +0000)]
download.pl: use https://source.openwrt.org

https://sources.lede-openwrt.org now redirects to there

https://downloads.openwrt.org/sources returns 404, so remove it here

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
5 years agou-boot.mk: use openwrt url instead of lede project
Luis Araneda [Sun, 18 Aug 2019 14:59:11 +0000 (10:59 -0400)]
u-boot.mk: use openwrt url instead of lede project

The LEDE URL is automatically redirected to the OpenWRT one,
returning an HTTP 301 code (Moved Permanently).

Also, use https, as indicated by the redirect.

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
5 years agoramips: add MT7530 switch port-mirroring support
Deng Qingfang [Sun, 16 Dec 2018 15:49:07 +0000 (23:49 +0800)]
ramips: add MT7530 switch port-mirroring support

Compile & run tested on MT7620, MT7621

Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
[Tested on Phicomm PSG1218 rev.A, MediaTek MT7620A ver:2 eco:6]
Tested-by: MingHao Chen <cmheia@email.com>
5 years agoiproute2: add libcap support, enabled in ip-full
Alin Nastac [Mon, 1 Jul 2019 08:57:26 +0000 (10:57 +0200)]
iproute2: add libcap support, enabled in ip-full

Preserve optionality of libcap by having configuration script follow the
HAVE_CAP environment variable, used similarly to the HAVE_ELF variable.

Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase/refresh patches]
5 years agolua: add lua.hpp to InstallDev
James Taylor [Wed, 5 Jun 2019 12:22:15 +0000 (22:22 +1000)]
lua: add lua.hpp to InstallDev

This is necessary to build PowerDNS authoritative and recursor against
OpenWRT, and may avoid packages depending on lua/host unnecessarily.

Signed-off-by: James Taylor <james@jtaylor.id.au>
5 years agortl8812au-ct: Add vendor command policy
Hauke Mehrtens [Sun, 18 Aug 2019 11:58:21 +0000 (13:58 +0200)]
rtl8812au-ct: Add vendor command policy

Fixes: 928e893a11db ("mac80211: Update to version 5.3-rc4-1")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years agomwlwifi: Fix loading with backports v5.3
Boris Krasnovskiy [Sun, 18 Aug 2019 00:04:00 +0000 (20:04 -0400)]
mwlwifi: Fix loading with backports v5.3

This adds a vendor command policy which is enforced since mac80211 from
kernel 5.3

Fixes: 928e893a11db ("mac80211: Update to version 5.3-rc4-1")
Signed-off-by: Boris Krasnovskiy <boris.krasnovskiy@lairdtech.com>
5 years agoat91/image/sama5.mk: check for sama5d4_xplained device
Sandeep Sheriker M [Wed, 14 Aug 2019 21:02:17 +0000 (21:02 +0000)]
at91/image/sama5.mk: check for sama5d4_xplained device

check for sama5d4_xplained device while copying at91bootstrap binary
to sdcard image.

Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
5 years agoat91: remove Build/at91-sdcard command
Sandeep Sheriker M [Wed, 14 Aug 2019 21:02:16 +0000 (21:02 +0000)]
at91: remove Build/at91-sdcard command

remove at91-sdcard build command from Makefile as this is moved to
respective subtarget Makefile.

Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
5 years agoat91: add uboot environments
Sandeep Sheriker M [Wed, 14 Aug 2019 00:42:15 +0000 (00:42 +0000)]
at91: add uboot environments

add uboot environments to sdcard image

Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
5 years agoat91: move at91-sdcard command to sama5.mk
Sandeep Sheriker M [Wed, 14 Aug 2019 00:42:15 +0000 (00:42 +0000)]
at91: move at91-sdcard command to sama5.mk

Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
5 years agoat91bootstrap: add sama5d27_som1_eksd1_uboot as default defconfig
Sandeep Sheriker M [Wed, 14 Aug 2019 00:42:15 +0000 (00:42 +0000)]
at91bootstrap: add sama5d27_som1_eksd1_uboot as default defconfig

Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
5 years agoat91bootstrap: add support for at91sam9x5ek
Sandeep Sheriker M [Wed, 14 Aug 2019 00:42:14 +0000 (00:42 +0000)]
at91bootstrap: add support for at91sam9x5ek

Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
5 years agoat91bootstrap: bump v3.8.10 to v3.8.12
Sandeep Sheriker M [Wed, 14 Aug 2019 00:42:14 +0000 (00:42 +0000)]
at91bootstrap: bump v3.8.10 to v3.8.12

Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
5 years agouboot-at91: fix -Wformat-security
Sandeep Sheriker M [Wed, 14 Aug 2019 00:42:14 +0000 (00:42 +0000)]
uboot-at91: fix -Wformat-security

add patch to fix -Wformat-security warnings.

Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
5 years agouboot-at91: changed som1 ek default defconfigs
Sandeep Sheriker M [Wed, 14 Aug 2019 00:42:13 +0000 (00:42 +0000)]
uboot-at91: changed som1 ek default defconfigs

replaced som1 ek spi flash with qspi defconfig and mmc with mmc1
defconfig.

Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
5 years agouboot-at91: add at91sam9x5ek soc
Sandeep Sheriker M [Wed, 14 Aug 2019 00:42:13 +0000 (00:42 +0000)]
uboot-at91: add at91sam9x5ek soc

add support to build u-boot binaries for at91sam9x5ek socs.

Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
5 years agouboot-at91: bump linux4sam_5.8 to linux4sam_6.0
Sandeep Sheriker M [Wed, 14 Aug 2019 00:42:12 +0000 (00:42 +0000)]
uboot-at91: bump linux4sam_5.8 to linux4sam_6.0

Signed-off-by: Sandeep Sheriker M <sandeep.sheriker@microchip.com>
5 years agoramips: fix switch ports settings
Chen Minqiang [Wed, 7 Aug 2019 00:58:48 +0000 (08:58 +0800)]
ramips: fix switch ports settings

This change the switch settings for:
HC5661: 4 lan ports + 1 wan port
Y1S: 2 lan ports(G port) + 2 lan ports(E port) + 1 wan port

Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
5 years agoramips: hc5xxx: use switch trigger for leds
Chen Minqiang [Wed, 6 Mar 2019 11:04:26 +0000 (19:04 +0800)]
ramips: hc5xxx: use switch trigger for leds

netdev on eth0.2 can't show link status of wan port because eth0 is
connected to builtin switch and is always link up. Use swconfig
trigger instead.

Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
[redo commit message]
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
5 years agoath79: create DTSI for ar9341 TP-Link devices
Adrian Schmutzler [Mon, 12 Aug 2019 13:12:02 +0000 (15:12 +0200)]
ath79: create DTSI for ar9341 TP-Link devices

This patch creates a shared DTSI for the TP-Link devices based
on ar9341 as those share a lot of definitions.

While at it, change from gpio-keys-polled to gpio-keys, remove
unused pll-data and remove some inherited stuff, too.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
5 years agoath79: migrate TP-Link TL-MR3420v2 to ath79
Lim Guo Wei [Mon, 12 Aug 2019 07:54:11 +0000 (15:54 +0800)]
ath79: migrate TP-Link TL-MR3420v2 to ath79

Specifications:
- SoC: ar9341
- RAM: 32M
- Flash: 4M
- Ethernet: 5x FE ports
- WiFi: ar9341-wmac

Flash instruction:
Upload generated factory firmware on vendor's web interface.

This changes the key assignment compared to ar71xx support of this
device, since of the two keys on the device one is used as combined
Reset/WPS and the second one as WiFi on/off button.
Despite, the reset button required GPIO_ACTIVE_HIGH to work correctly.

Signed-off-by: Lim Guo Wei <limguowei@gmail.com>
[redo commit message]
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
5 years agoath79: add support for PISEN TS-D084
xixiao zheng [Tue, 25 Jun 2019 08:32:58 +0000 (16:32 +0800)]
ath79: add support for PISEN TS-D084

PISEN TS-D084 is an wireless router with a battery and integrated power
supply based on Atheros AR9331.

Specification:

- 400/400/200 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 8 MB of FLASH (SPI NOR)
- 1x 10/100 Mbps Ethernet
- 1T1R 2.4 GHz (AR9331)
- 1x USB 2.0

Flash instruction:
 Upload generated factory image through web interface.

Signed-off-by: xixiao zheng <xixiaozheng64@gmail.com>
[wrap commit message, add flash instruction]
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
5 years agoramips: add support for ipTIME A604M
Sungbo Eo [Sat, 20 Jul 2019 18:34:59 +0000 (03:34 +0900)]
ramips: add support for ipTIME A604M

ipTIME A604M is a 2.4/5GHz band AC1200 router, based on MediaTek
MT7628AN.

Specifications:
- SoC: MT7628AN
- RAM: DDR2 64MB
- Flash: SPI NOR 8MB
- WiFi:
  - 2.4GHz: SoC internal
  - 5GHz: MT7612EN
- Ethernet: 5x 10/100Mbps
  - Switch: SoC internal
- UART:
  - J1: 3.3V, TX, RX, GND (3.3V is the square pad) / 57600 8N1

Installation via web interface:
1.  Flash **initramfs** image through the stock web interface.
2.  Boot into OpenWrt and perform sysupgrade with sysupgrade image.

Revert to stock firmware:
1.  Perform sysupgrade with stock image.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
5 years agoath79: adtran,bsap1840/bsap1800-v2: move bootcount out of 02_network
Chuanhong Guo [Sat, 10 Aug 2019 12:00:24 +0000 (20:00 +0800)]
ath79: adtran,bsap1840/bsap1800-v2: move bootcount out of 02_network

These device supports were introduced before /etc/init.d/bootcount and they
had a bootcount reset done in /etc/board.d/02_network.
Move it into /etc/init.d/bootcount instead.

Suggested-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
5 years agotreewide: sync bootcount scripts across targets
Chuanhong Guo [Sat, 10 Aug 2019 11:35:56 +0000 (19:35 +0800)]
treewide: sync bootcount scripts across targets

This commit made the following changes to sync all bootcount scripts:

1. use boot() instead of start()
    This script only needs to be executed once when boot is complete.
    use boot() to make this explicit.

2. drop sourcing of /lib/functions.sh
    This is aready done in /etc/rc.common.

3. ramips: replace board name checking with a case

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
5 years agoustream-ssl: update to latest git HEAD
Hauke Mehrtens [Sat, 17 Aug 2019 15:09:42 +0000 (17:09 +0200)]
ustream-ssl: update to latest git HEAD

e8f9c22 Revise supported ciphersuites
7e9e269 wolfssl, openssl: use TLS 1.3, set ciphersuites

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years agotools/e2fsprogs: Update to 1.45.3
Daniel Engberg [Sat, 15 Jun 2019 09:47:21 +0000 (09:47 +0000)]
tools/e2fsprogs: Update to 1.45.3

Update e2fsprogs to 1.45.3
Remove OpenBSD patch
Remove Darwin patch, neither macports or brew patches these files
Add patch to avoid crond detection on host OS

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
5 years agotarget/x86/image: use qemu-img from STAGING_DIR_HOST
Florian Eckert [Mon, 12 Aug 2019 10:04:04 +0000 (12:04 +0200)]
target/x86/image: use qemu-img from STAGING_DIR_HOST

The host tool package qemu is build for the target x86. The installed tool
qemu-img is needed to build vdi or vmdk images. In the image Makefile we
use however the host installed qemu-img command and not the tool from the
buildsystem. This commit force to use the already build qemu-img command
from the openwrt toolchain.

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
5 years agomusl: ldso/dlsym: fix mips returning undef dlsym
Luiz Angelo Daros de Luca [Fri, 16 Aug 2019 04:33:58 +0000 (01:33 -0300)]
musl: ldso/dlsym: fix mips returning undef dlsym

This happens only the second time a library is loaded by dlopen().
After lib1 is loaded, dlsym(lib1,"undef1") correctly resolves the undef
symbol from lib1 dependencies. After the second library is loaded,
dlsym(lib2,"undef1") was returning the address of "undef1" in lib2
instead of searching lib2 dependencies.

Using upstream fix which now uses the same logic for relocation time
and dlsym.

Fixes openwrt/packages#9297

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
5 years agogemini: Enable flash boot on reference design type
Linus Walleij [Wed, 17 Jul 2019 17:23:32 +0000 (19:23 +0200)]
gemini: Enable flash boot on reference design type

The flash layout on the Storlink reference design for Gemini
is using 2 MB flash for the kernel, and it also insists on
overwriting the partition table with default values on every
boot. The same is true for the SQ201. This poses a problem
on recent OpenWrt firmware as the base zImage is bigger
than 2 MB.

At the same time there is a ramdisk partition of 6 MB that we
don't really need. The partition table looks like this:

Creating 7 MTD partitions on "30000000.flash":
0x000000000000-0x000000016000 : "BOOT"
0x000000120000-0x000000320000 : "Kern"
0x000000320000-0x000000920000 : "Ramdisk"
0x000000920000-0x000000f20000 : "Application"
0x000000f20000-0x000000f40000 : "VCTL"
0x000000f40000-0x000000fe0000 : "CurConf"
0x000000fe0000-0x000001000000 : "FIS directory"

On boot the "Kern" partition is copied to RAM @0x01600000
and the "Ramdisk" partition is copied to RAM @0x00800000.
Then the kernel is executed.

The idea with this patch is to extend the "Kern" partition
with the "Ramdisk" partition to get a full 8 MB to use
for the kernel. Then we put the OpenWrt JFFS2 rootfs
inside the "Application" partition.

We create a small assembly loop that we prepend to the
"Kern" image that will copy the "Kern" from 0x0160000
and the "Ramdisk" from 0x00800000 and put them in
consecutive space at 0x00400000 and execute it from
there, using "Application" as rootfs.

We generate 3 main files:
- zImage - contains the assembly bootstrap loop and
  the first part of the generated kernel image
- rd.gz - contains the second part of the generated
  kernel image
- hddapp.tgz - contains the root filesystem

On the SQ201 I flash these manually using the native boot
loader PLATO, "Y" alternative for the zImage, "R" for
the rd.gz image and "A" for hddapp.tgz.

This works fine and I can now boot to prompt on the SQ201
with nothing but flash.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
5 years agogemini: Add copy-kernel utility package
Linus Walleij [Wed, 17 Jul 2019 17:23:31 +0000 (19:23 +0200)]
gemini: Add copy-kernel utility package

This package just contains a small Gemini-only assembler
bootstrap loop to copy the kernel from the two fragments
(previously zImage at 0x01600000 and initramdisk at 0x00800000)
into one big zImage of up to 8 MB at 0x00400000.

It will be built on demand from the Gemini image Makefile.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
5 years agogemini: Fix up flash accesses
Linus Walleij [Wed, 17 Jul 2019 17:22:40 +0000 (19:22 +0200)]
gemini: Fix up flash accesses

The SL93512r and the NAS4220B have Redboot partition
tables (rely on these) and need to boot from mtdblock3.
Add two patches from upstream to fix this.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
5 years agogemini: Fix up some confused pin config on SL93512r
Linus Walleij [Wed, 17 Jul 2019 17:21:48 +0000 (19:21 +0200)]
gemini: Fix up some confused pin config on SL93512r

Upstream patch fixing the errors in the device tree.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
5 years agozynq: remove kernel 4.14 support
Luis Araneda [Sun, 4 Aug 2019 04:32:06 +0000 (00:32 -0400)]
zynq: remove kernel 4.14 support

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
5 years agozynq: switch to kernel 4.19
Luis Araneda [Sun, 4 Aug 2019 04:32:05 +0000 (00:32 -0400)]
zynq: switch to kernel 4.19

Use kernel 4.19 by default

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
5 years agozynq: k4.19: fix kernel panic on smp bring-up
Luis Araneda [Sun, 4 Aug 2019 04:32:04 +0000 (00:32 -0400)]
zynq: k4.19: fix kernel panic on smp bring-up

This fixes a kernel panic when validating the
arguments of memcpy at runtime, which is enabled
by generic's CONFIG_FORTIFY_SOURCE for k4.19

This wasn't triggered on 4.14, as ARCH_HAS_FORTIFY_SOURCE
was added on k4.17 for the ARM architecture

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
5 years agozynq: kernel: use some configs provided by generic
Luis Araneda [Sun, 4 Aug 2019 04:32:03 +0000 (00:32 -0400)]
zynq: kernel: use some configs provided by generic

- Select CONFIG_PREEMPT_NONE (server) instead
  of CONFIG_PREEMPT (low-latency desktop)
- Remove CONFIG_USELIB
- Remove CONFIG_SYSCTL_SYSCALL

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
5 years agozynq: add k4.19 config
Luis Araneda [Sun, 4 Aug 2019 04:32:02 +0000 (00:32 -0400)]
zynq: add k4.19 config

Copied from kernel 4.14 and refreshed
with make kernel_oldconfig

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
5 years agowolfssl: bump to 4.1.0-stable
Eneas U de Queiroz [Mon, 5 Aug 2019 14:47:58 +0000 (11:47 -0300)]
wolfssl: bump to 4.1.0-stable

Always build AES-GCM support.
Unnecessary patches were removed.

This includes two vulnerability fixes:

CVE-2019-11873: a potential buffer overflow case with the TLSv1.3 PSK
extension parsing.

CVE-2019-13628 (currently assigned-only): potential leak of nonce sizes
when performing ECDSA signing operations. The leak is considered to be
difficult to exploit but it could potentially be used maliciously to
perform a lattice based timing attack.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
5 years agobzip2: Update to 1.0.8
Rosen Penev [Thu, 8 Aug 2019 19:01:21 +0000 (12:01 -0700)]
bzip2: Update to 1.0.8

It seems bzip2 was abandoned by the author and adopted by the sourceware
people. The last release of bzip2 was from 2010.

Several security bugs were fixed as well as others.

Fixed up PKG_LICENSE to be compatible with SPDX.

Changed URLs to point to the new home.

Added patch that gets rid of deprecated utime function and switches it to
utimensat.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
5 years agobuild: fix indent in image-commands.mk
Adrian Schmutzler [Fri, 9 Aug 2019 11:55:43 +0000 (13:55 +0200)]
build: fix indent in image-commands.mk

Convert leading spaces to tab to match rest of the file.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
5 years agomac80211: Update to version 5.3-rc4-1
Hauke Mehrtens [Sat, 3 Aug 2019 10:30:38 +0000 (12:30 +0200)]
mac80211: Update to version 5.3-rc4-1

The removed patches were applied upstream.
The type of the RT2X00_LIB_EEPROM config option was changed to bool,
because boolean is an invalid value and the new kconfig system
complained about this.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years agomac80211: Update to version 5.2.8-1
Hauke Mehrtens [Thu, 15 Aug 2019 09:30:44 +0000 (11:30 +0200)]
mac80211: Update to version 5.2.8-1

This contains multiple fixes from the upstream kernel.
The removed patch was merged upstream.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years agomdadm: Use upstream fix for musl 1.1.23 compile
Hauke Mehrtens [Wed, 7 Aug 2019 20:13:36 +0000 (22:13 +0200)]
mdadm: Use upstream fix for musl 1.1.23 compile

Fixes: ba8aeb02eae2 ("mdadm: Fix compile with musl 1.1.23")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years agohostapd: Allow CONFIG_IEEE80211W for all but mini variant
Hauke Mehrtens [Wed, 7 Aug 2019 19:37:25 +0000 (21:37 +0200)]
hostapd: Allow CONFIG_IEEE80211W for all but mini variant

This commit will activate CONFIG_IEEE80211W for all, but the mini
variant when at least one driver supports it. This will add ieee80211w
support for the mesh variant for example.

Fixes: FS#2397
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years agohostapd: Remove ROBO switch support
Hauke Mehrtens [Sat, 4 May 2019 12:16:52 +0000 (14:16 +0200)]
hostapd: Remove ROBO switch support

The driver was removed from OpenWrt a long time ago.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
5 years agolua5.3: include hpp header
Colby Whitney [Mon, 22 Jul 2019 16:16:14 +0000 (10:16 -0600)]
lua5.3: include hpp header

The install was missing the hpp header.  Adding that in.

Signed-off-by: Colby Whitney <colby.whitney@luxul.com>
5 years agomvebu: sysupgrade: sdcard: fix platform_do_upgrade_sdcard
Klaus Kudielka [Sun, 28 Jul 2019 13:54:21 +0000 (15:54 +0200)]
mvebu: sysupgrade: sdcard: fix platform_do_upgrade_sdcard

Unconditionally execute the final case statement, even if the disk layout
changed. This is necessary, to keep the original Turris Omnia flash
instructions working: The disk layout WILL change, when switching from
TurrisOS to OpenWRT. Without updating the uboot environment at the same
time, the user would end up with an unbootable system.

Fixes commit 2e5a0b81ec ("mvebu: sysupgrade: sdcard: keep user added ...")

Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
5 years agobrcm63xx: do not build images for 16 MiB RAM devices by default
Jonas Gorski [Fri, 16 Aug 2019 10:24:13 +0000 (12:24 +0200)]
brcm63xx: do not build images for 16 MiB RAM devices by default

OpenWrt will run out of RAM while booting with the default package set,
so let's not provide images that will likely fail. They can still be
built manually through source or IB if needed.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
5 years agofirewall: improve ipset support
Kevin Darbyshire-Bryant [Fri, 16 Aug 2019 09:05:12 +0000 (10:05 +0100)]
firewall: improve ipset support

Bump to latest git HEAD

509e673 firewall3: Improve ipset support

The enabled option did not work properly for ipsets, as it was not
checked on create/destroy of a set. After this commit, sets are only
created/destroyed if enabled is set to true.

Add support for reloading, or recreating, ipsets on firewall reload.  By
setting "reload_set" to true, the set will be destroyed and then
re-created when the firewall is reloaded.

Add support for the counters and comment extensions. By setting
"counters" or "comment" to true, then counters or comments are added to
the set.

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
5 years agolantiq: unify Fritz!Box LED mappings
David Bauer [Sun, 11 Aug 2019 21:37:24 +0000 (23:37 +0200)]
lantiq: unify Fritz!Box LED mappings

This commit unifies the LED mapping of the AVM Fritz!Box routers, which
have a combined Power/DSL LED.

With the stock firmware, the Power LED has the following
characteristics:

 - Blink when DSL sync is being established
 - Solid when DSL sync is present

We can't completely resemble this behavior in OpenWrt. Currently, the
Power LED is completely off, when DSL sync is missing. This is not
really helpful, as a user might have the impression, that he bricked his
device.

Instead, map the Info-LED to the state of the DSL connection.
There is no consistent behavior for the Info-LED in the stock
firmware, as the user can set it's function by himself. The DSL
connection state is one possible option for the Info LED there.

Also use the red Power LED to indicate a running upgrade, in case the
board has a two-color Power LED.

Signed-off-by: David Bauer <mail@david-bauer.net>
5 years agoath79: remove SUPPORTED_DEVICES for TP-Link Archer D50 v1
Adrian Schmutzler [Wed, 14 Aug 2019 22:46:07 +0000 (00:46 +0200)]
ath79: remove SUPPORTED_DEVICES for TP-Link Archer D50 v1

This device has not been supported in ar71xx, so there is no need
for an explicit SUPPORTED_DEVICES entry.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
5 years agoath79: use Power LED as System LED for TL-WR842Nv3
David Bauer [Wed, 14 Aug 2019 22:29:45 +0000 (00:29 +0200)]
ath79: use Power LED as System LED for TL-WR842Nv3

The TP-Link TL-WR842N v3 has a software-controllable Power LED. The WPS
LED is normally only used as a System LED, when the Power LED can't be
controlled by software.

Additionally, the Power LED is also the System LED for this board in
ar71xx.

Signed-off-by: David Bauer <mail@david-bauer.net>
5 years agoipq40xx: fix AVM NAND caldata extraction
David Bauer [Mon, 12 Aug 2019 23:44:03 +0000 (01:44 +0200)]
ipq40xx: fix AVM NAND caldata extraction

The AVM Fritz!Box 7530 (and probably other AVM IPQ4019 NAND devices)
has it's caldata not stored consistently, but instead at currently
3 known possible offsets.

As we get a non-zero exit code from fritz_cal_extract, simply try all
three possible offsets on both bootloader partitions, until a matching
caldata for each radio is found.

Reported-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David Bauer <mail@david-bauer.net>
5 years agokernel: bump 4.19 to 4.19.66
Koen Vandeputte [Mon, 12 Aug 2019 09:52:25 +0000 (11:52 +0200)]
kernel: bump 4.19 to 4.19.66

Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.14 to 4.14.138
Koen Vandeputte [Mon, 12 Aug 2019 09:30:09 +0000 (11:30 +0200)]
kernel: bump 4.14 to 4.14.138

Refreshed all patches.

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agokernel: bump 4.9 to 4.9.189
Koen Vandeputte [Mon, 12 Aug 2019 08:10:44 +0000 (10:10 +0200)]
kernel: bump 4.9 to 4.9.189

Refreshed all patches.

Compile-tested on: none
Runtime-tested on: none

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
5 years agotreewide: convert WiFi caldata size and offset to hexadecimal
Adrian Schmutzler [Fri, 9 Aug 2019 15:45:13 +0000 (17:45 +0200)]
treewide: convert WiFi caldata size and offset to hexadecimal

This changes size and offset set for WiFi caldata extraction and
MAC address adjustment to hexadecimal notation.

This will be much clearer for the reader when numbers are big, and
will also match the style used for mtd-cal-data in DTS files.

Since dd cannot deal with hexadecimal notation, one has to convert
back to decimal by simple $(($hexnum)).

Acked-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
5 years agotreewide: convert MAC address location offsets to hexadecimal
Adrian Schmutzler [Fri, 9 Aug 2019 15:45:12 +0000 (17:45 +0200)]
treewide: convert MAC address location offsets to hexadecimal

This changes the offsets for the MAC address location in
mtd_get_mac_binary* and mtd_get_mac_text to hexadecimal notation.

This will be much clearer for the reader when numbers are big, and
will also match the style used for mtd-mac-address in DTS files.

(e.g. 0x1006 and 0x5006 are much more useful than 4102 and 20486)

Acked-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
5 years agoimagebuilder: fix `make info` for empty SUPPORTED_DEVICES
Paul Spooren [Tue, 13 Aug 2019 21:38:17 +0000 (11:38 -1000)]
imagebuilder: fix `make info` for empty SUPPORTED_DEVICES

For x86/64 (maybe more) target the SUPPORTED_DEVICES variable is empty
which causes the `&&` junction to fail, producing a non zero exit code.

Tested-by: Paul Spooren <mail@aparcar.org>
Fixed-by: Jo-Philipp Wich <jo@mein.io>
Signed-off-by: Paul Spooren <mail@aparcar.org>
5 years agobuild: allow overriding default selection state for devices
Jonas Gorski [Tue, 13 Aug 2019 10:33:47 +0000 (12:33 +0200)]
build: allow overriding default selection state for devices

Allow overriding the default selection state for Devices, similar to
setting a default for packages.

E.g. by setting DEFAULT to n, they won't be selected by default anymore
when enabling all device in the multi device profile.

This allows preventing images being built by the default config for
known broken devices, devices without enough RAM/flash, or devices not
working with a certain kernel versions.

This does not prevent the devices from being manually selected or images
being built by the ImageBuilder. These devices often still have worth
with a reduced package-set, or as a device for regression testing, when
no better device is available.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
5 years agoimage.mk: remove device_ from manifest filename
Paul Spooren [Mon, 12 Aug 2019 09:08:33 +0000 (23:08 -1000)]
image.mk: remove device_ from manifest filename

The manifest file is based on IMG_PREFIX and PROFILE_SANITIZED, whereas
the latter takes a string like DEVICE_8dev_carambola2 and sanitizes it.
This behaviour results in a useless "device_" profile-prefix in the
device manifest filename. Now uses *subst* to remove that.

Therefore this patch results more consistent device file names:

openwrt-ath79-generic-8dev_carambola2-initramfs-kernel.bin
openwrt-ath79-generic-8dev-carambola2.manifest
openwrt-ath79-generic-8dev_carambola2-squashfs-sysupgrade.bin

instead of a single file being called

openwrt-ath79-generic-device_8dev-carambola2.manifest

Signed-off-by: Paul Spooren <mail@aparcar.org>
5 years agobuild: add buildinfo files for reproducibility
Paul Spooren [Thu, 13 Jun 2019 00:24:04 +0000 (02:24 +0200)]
build: add buildinfo files for reproducibility

generate feeds.buildinfo and version.buildinfo in build dir after
containing the feed revisions (via ./scripts/feeds list -sf) as well as
the current revision of buildroot (via ./scripts/getver.sh).

With this information it should be possible to reproduce any build,
especially the release builds.

Usage would be to move feeds.buildinfo to feeds.conf and git checkout the
revision hash of version.buildinfo.

Content of feeds.buildinfo would look similar to this:

    src-git routing https://git.openwrt.org/feed/routing.git^bf475d6
    src-git telephony https://git.openwrt.org/feed/telephony.git^470eb8e
    ...

Content of version.buildinfo would look similar to this:

    r10203+1-c12bd3a21b

Without the exact feed revision it is not possible to determine
installed package versions.

Also rename config.seed to config.buildinfo to follow the recommended
style of https://reproducible-builds.org/docs/recording/

Signed-off-by: Paul Spooren <mail@aparcar.org>
5 years agotools/patch: apply upstream patch for cve-2019-13638
Russell Senior [Sun, 11 Aug 2019 20:57:08 +0000 (13:57 -0700)]
tools/patch: apply upstream patch for cve-2019-13638

GNU patch through 2.7.6 is vulnerable to OS shell command injection that
can be exploited by opening a crafted patch file that contains an ed style

diff payload with shell metacharacters. The ed editor does not need to be
present on the vulnerable system. This is different from CVE-2018-1000156.

https://nvd.nist.gov/vuln/detail/CVE-2019-13638

Signed-off-by: Russell Senior <russell@personaltelco.net>
5 years agotools/scons: update scons to 3.1.1
Russell Senior [Tue, 13 Aug 2019 07:12:43 +0000 (00:12 -0700)]
tools/scons: update scons to 3.1.1

This version bump includes a bunch of fixes and improvements, which
should fix gpsd build breakage in the package feeds.

Ref: https://github.com/SCons/scons/blob/master/src/CHANGES.txt
Signed-off-by: Russell Senior <russell@personaltelco.net>
[added missing commit description]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
5 years agoath79: update DTS for TP-Link WDR3600/WDR4300 v1
Adrian Schmutzler [Sun, 28 Jul 2019 10:16:51 +0000 (12:16 +0200)]
ath79: update DTS for TP-Link WDR3600/WDR4300 v1

This replaces gpio-export by gpio-hogs and switches buttons
to interrupt-driven gpio-keys.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
5 years agoRevert faulty tree push
Felix Fietkau [Mon, 12 Aug 2019 10:24:06 +0000 (12:24 +0200)]
Revert faulty tree push

Revert "mac80211: add new minstrel_ht patches to improve probing on mt76x2" (9861050b85e5381c93d73ffdbc24c130400e0fb8)
Revert "kernel: use bulk free in kfree_skb_list to improve performance" (98b654de2e7502507b31f0fb82befbb48f9c8542)
Revert "ramips: add preliminary support for WIO ONE" (085141dc5ba5e763e1bf4c1a2fd6957160810ccc)
Revert "ramips: add preliminary support for SGE AP-MTKH7-0006 developer board" (b1db6d0539511f60bf65fbde28b16afa31180e34)
Revert "build: use config.site generated by autoconf-lean, drop hardcoded sitefiles" (363ce4329d4f6c00b4a7cb83dd1821fafc0d40ad)
Revert "toolchain: add autoconf-lean" (fdb30eed03ae56cd87078b64d9b2fac00799e783)
Revert "build: allow overriding the filename on the remote server when downloading" (6fa0e07758524eddf20c9b66dfcb55c490e1961e)

Signed-off-by: Felix Fietkau <nbd@nbd.name>
5 years agomac80211: add new minstrel_ht patches to improve probing on mt76x2
Felix Fietkau [Fri, 14 Jun 2019 19:32:15 +0000 (21:32 +0200)]
mac80211: add new minstrel_ht patches to improve probing on mt76x2

Signed-off-by: Felix Fietkau <nbd@nbd.name>
5 years agokernel: use bulk free in kfree_skb_list to improve performance
Felix Fietkau [Sun, 24 Mar 2019 17:04:49 +0000 (18:04 +0100)]
kernel: use bulk free in kfree_skb_list to improve performance

Signed-off-by: Felix Fietkau <nbd@nbd.name>
5 years agoramips: add preliminary support for WIO ONE
Felix Fietkau [Mon, 15 Oct 2018 10:52:34 +0000 (12:52 +0200)]
ramips: add preliminary support for WIO ONE

Signed-off-by: Felix Fietkau <nbd@nbd.name>
5 years agoramips: add preliminary support for SGE AP-MTKH7-0006 developer board
Felix Fietkau [Mon, 15 Oct 2018 10:52:34 +0000 (12:52 +0200)]
ramips: add preliminary support for SGE AP-MTKH7-0006 developer board

Signed-off-by: Felix Fietkau <nbd@nbd.name>
5 years agobuild: use config.site generated by autoconf-lean, drop hardcoded sitefiles
Felix Fietkau [Fri, 2 Mar 2018 13:17:10 +0000 (14:17 +0100)]
build: use config.site generated by autoconf-lean, drop hardcoded sitefiles

Signed-off-by: Felix Fietkau <nbd@nbd.name>
5 years agotoolchain: add autoconf-lean
Felix Fietkau [Fri, 2 Mar 2018 13:12:18 +0000 (14:12 +0100)]
toolchain: add autoconf-lean

Use it to generate a more comprehensive configure sitefile

Signed-off-by: Felix Fietkau <nbd@nbd.name>
5 years agobuild: allow overriding the filename on the remote server when downloading
Felix Fietkau [Thu, 22 Feb 2018 16:26:41 +0000 (17:26 +0100)]
build: allow overriding the filename on the remote server when downloading

Github releases usually don't contain the project name in the release
filename, which makes them very inconvenient to use from the build
system. Add support for naming the local file differently.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
5 years agosdk: fix GCC and Python dangling symlinks
Petr Štetiar [Thu, 8 Aug 2019 19:16:02 +0000 (21:16 +0200)]
sdk: fix GCC and Python dangling symlinks

Force prereq again in SDK in order to fix GCC and Python dangling
symlinks:

 staging_dir/host/bin/g++ -> /builder/ath79_generic/ccache_cxx.sh
 staging_dir/host/bin/gcc -> /builder/ath79_generic/ccache_cc.sh
 staging_dir/host/bin/python -> /usr/bin/python3.5
 staging_dir/host/bin/python3 -> /usr/bin/python3.5

Ref: FS#2424
Signed-off-by: Petr Štetiar <ynezz@true.cz>
5 years agoramips: fix lan and wan mac addresses for Cudy WR1000
Davide Fioravanti [Sat, 10 Aug 2019 22:38:53 +0000 (00:38 +0200)]
ramips: fix lan and wan mac addresses for Cudy WR1000

Lan and Wan addresses are swapped compared to the original firmware.
This patch fixes this problem

Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
5 years agolantiq: add led-upgrade alias for Fritz!Box 7412
David Bauer [Sat, 10 Aug 2019 14:16:19 +0000 (16:16 +0200)]
lantiq: add led-upgrade alias for Fritz!Box 7412

This adds the led-upgrade alias for the AVM Fritz!Box 7412 to indicate a
running firmware upgrade.

Signed-off-by: David Bauer <mail@david-bauer.net>
5 years agolantiq: enable second VPE on Fritz!Box 7412
David Bauer [Fri, 9 Aug 2019 21:45:56 +0000 (23:45 +0200)]
lantiq: enable second VPE on Fritz!Box 7412

The AVM Fritz!Box 7412 does not use the VMMC part of the Lantiq chip but
rather a proprietary solution based on the DECT chip for the FXS ports.

Therefore, the second VPE can be enabled for use with OpenWrt.

Signed-off-by: David Bauer <mail@david-bauer.net>
5 years agolantiq: correct Fritz!Box 7412 button logic level
David Bauer [Fri, 9 Aug 2019 22:45:49 +0000 (00:45 +0200)]
lantiq: correct Fritz!Box 7412 button logic level

The AVM FRITZ!Box 7412 buttons are both active low, which is currently
incorrectly defined in the device-tree.

This leads to the device booting directly into failsafe.

Signed-off-by: David Bauer <mail@david-bauer.net>
5 years agoramips: fix LED labels not updated during device name changes
Adrian Schmutzler [Tue, 6 Aug 2019 12:30:42 +0000 (14:30 +0200)]
ramips: fix LED labels not updated during device name changes

In commit d93969a13a5b ("ramips: Improve compatible for TP-Link
Archer devices") and subsequent ones, names of several devices
in ramips have been changed.
Since LED names are frequently invoked by $boardname, this has
broken LED setup in 01_leds, as $boardname and prefix in DTS
do not match anymore.

This patch updates device name prefixes for LEDs in DTS files,
and provides a migration script.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
5 years agoramips: add kmod-mt7615e to Xiaomi Mi Router 3 Pro images
Ozgur Can Leonard [Fri, 2 Aug 2019 18:55:41 +0000 (21:55 +0300)]
ramips: add kmod-mt7615e to Xiaomi Mi Router 3 Pro images

Now that the mt76/mt7615e driver is in Openwrt, might as well use it.

Signed-off-by: Ozgur Can Leonard <ozgurcan@gmail.com>
5 years agodnsmasq: use nettle ecc_curve access functions
Hans Dedecker [Fri, 9 Aug 2019 19:25:37 +0000 (21:25 +0200)]
dnsmasq: use nettle ecc_curve access functions

Fixes compile issues with nettle 3.5.1

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
5 years agonettle: Update to 3.5.1
Daniel Engberg [Sat, 3 Aug 2019 20:27:36 +0000 (22:27 +0200)]
nettle: Update to 3.5.1

Update (lib)nettle to 3.5.1
Bump ABI_VERSION

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
5 years agoath79: add missing IMAGE_SIZE for Comfast WR650AC v1/v2
Adrian Schmutzler [Fri, 9 Aug 2019 15:40:42 +0000 (17:40 +0200)]
ath79: add missing IMAGE_SIZE for Comfast WR650AC v1/v2

When adding support in 9ed272fe9500 ("ath79: add support for
Comfast WR650AC v1/v2"), IMAGE_SIZE has not been added to device
definition.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>