compat-drivers: add wil6210 driver

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: remove 'v' prefix from version on ChangeLog

As with the previous commit this follows the kernel.org
model as well as the older releases we were making.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: trim 'v' prefix from ChangeLog file

This follows the kernel.org releases as well as our old
releases.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: update genlog-3.8

This updates genlog-3.8 so it adds the extra version postfix
number. Even though the Linux kernel release may remain stable
we may at times make a new release of compat-drivers to update
fixes for backporting.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: add genlog-3.8

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: refresh patches

Refreshes patches for next-20130108

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: fix 61-netdev-addr_assign_type.patch

The following two patches adjusted uses of NET_ADDR_RANDOM
on some Ethernet drivers. This change adopts these changes
on the 61-netdev-addr_assign_type.patch patch.

commit 15c6ff3bc0ff3464a8c7efcdea09c86454571622
Author: Jiri Pirko <jiri@resnulli.us>
Date:   Tue Jan 1 03:30:17 2013 +0000

    net: remove unnecessary NET_ADDR_RANDOM "bitclean"

    NET_ADDR_SET is set in dev_set_mac_address() no need to alter
    dev->addr_assign_type value in drivers.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit e41b2d7fe7803e85e1202d0eb172717d7bf1bbaf
Author: Jiri Pirko <jiri@resnulli.us>
Date:   Tue Jan 1 03:30:15 2013 +0000

    net: set dev->addr_assign_type correctly

    Not a bitfield, but a plain value.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: fix collateral-evolutions/network/53-pr_fmt.patch

The brcmfmac driver was updated recently to only define
pr_fmt() once and it also had the undef for us. Technically
Joe should not have had to add the undef as I previously
went on a crusade to verify that this was not needed at the
driver level so an upstream patch is welcomed to remove that
undef upstream and then to add it for backporting purposes.

commit 79d7c4e8da4ac3cfa98e8e622a17baaeb3c9d29d
Author: Arend van Spriel <arend@broadcom.com>
Date:   Wed Jan 2 21:20:10 2013 +0100

    brcmfmac: define pr_fmt in one place

    Several source files (but not all) define the pr_fmt() macro in exactly
    the same way. Instead this commit defines it in a header file so driver
    logging is consistent.

Cc: Joe Perches <joe@perches.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: refresh patches

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: add old suspend/resume handlers only when function is available

All the suspend resume functions are only activated when
CONFIG_PM_SLEEP is set and not when CONFIG_PM is set.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: make patches apply again

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

update-initramfs: Add support for Fedora

Fedora doesn't ship lsb_release anymore. So try to read /etc/os-release
to find whether distribution is Fedora.

If Fedora is found, generate a new initramfs suffixed with -compat-drivers
to not override the distribution kernel's default one. Also add a new
kernel entry to grub2 configuration without overriding the default boot
entry.

Signed-off-by: Ozan Çağlayan <ozancag@gmail.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

update-initramfs: Silence lsb_release output

Silence lsb_release output to avoid command not found errors
on distributions not having lsb_release like Fedora.

Signed-off-by: Ozan Çağlayan <ozancag@gmail.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

update-initramfs: Update comments, fix some typos

update-initramfs is crucial for DRM drivers, let's clarify this.

Signed-off-by: Ozan Çağlayan <ozancag@gmail.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: refresh 0001-backport-alx.patch

Refresh patches again.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: refresh patch 0001-backport-alx.patch

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: update 0001-backport-alx.patch context

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: fix alx backport patch

The hunks required some manual fixing due to some
new code changes on the alx driver.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: refresh patches for next-20121218

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: allow git-paranoia to work on current directory

This allows you to run git-paranoia on your current directory.
It will return 0 if everything is squeeky clean. This is useful
if for example you want to run a cronjob to update git trees but
never update them if you have any deltas in place of any kind.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: refresh -u patches

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: refresh patches for next-20121214

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: refresh patches for next-20121211

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: ship include/linux/bcm47xx_wdt.h

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: remove 67-use_spinlock_t.patch

This work is now upstream.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: fix 62-usb_driver_lpm.patch

CONFIG_HOTPLUG is going away soon so a few helpers can
be removed now.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: fix 45-remove-platform-id-table.patch

CONFIG_HOTPLUG is going away soon so a few init/remove helpers
are being removed.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: remove __devexit_p() from 11-dev-pm-ops.patch

The __devexit_p() was removed from a few drivers given that
CONFIG_HOTPLUG is going away.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: remove ksize() ifdef on scan.c

The patch bellow remove the usage of ksize() so just
remove that hunk.

commit 9caf03640279e64d0ba36539b42daa1b43a49486
Author: Johannes Berg <johannes.berg@intel.com>
Date:   Thu Nov 29 01:25:20 2012 +0100

    cfg80211: fix BSS struct IE access races

    When a BSS struct is updated, the IEs are currently
    overwritten or freed. This can lead to races if some
    other CPU is accessing the BSS struct and using the
    IEs concurrently.

    Fix this by always allocating the IEs in a new struct
    that holds the data and length and protecting access
    to this new struct with RCU.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: modify release script to support unified drivers

The -u argument was used to upload releases to kernel.org. Lets
rename this to -r for 'release to kernel.org' given that we have
no introduced -u for unified-drivers support into compat-drivers.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: fix alx suspend/resume calls for old kernels

The declarations compat_pci_suspend() and compat_pci_resume()
must be placed before SIMPLE_DEV_PM_OPS().

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: add the MDIO module

The alx Ethernet driver depends on the MDIO module.
This module has UAPI and kernel headers. The headers are
carried over intact to help *both* backport it for older
drivers and also provide the newer driver to other kernels
that may have it enabled after it was introduced in 2.6.31.

The way support for MDIO is enabled is by carrying over both
the UAPI and Linux kernel header files along with the module
with in compat-drivers. The exported symbols of the module
however are renamed with a compat_* prefix within compat
in include/linux/compat-2.6.31.h. This enables Linux
distributions shipping a driver that depends on older
versions of the MDIO to keep using it while allowing the
supplied drivers in compat-drivers to become users of
the newer module it likely will require a tighter
dependency on.

An alternative to using different exported symbol names
is for compat-drivers to work under a separate namespace
and while I hear some folks already implemented that support
we never got those patches sent to us.

C'est la vie.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: fix 11-dev-pm-ops.patch

Hauke had sent out patches to help clean up
the pm run time callbacks to allow this patch
to be simplified. This takes care of the
required changes.

This goes compile tested against next-20121203

mcgrof@drvbp1 ~/devel/compat-drivers (git::master)$ time ckmake
Trying kernel 3.6.5-030605-generic [OK]
Trying kernel 3.5.7-030507-generic [OK]
Trying kernel 3.4.17-030417-generic [OK]
Trying kernel 3.3.8-030308-generic [OK]
Trying kernel 3.2.33-030233-generic [OK]
Trying kernel 3.1.10-030110-generic [OK]
Trying kernel 3.0.50-030050-generic [OK]
Trying kernel 2.6.39-02063904-generic [OK]
Trying kernel 2.6.38-02063808-generic [OK]
Trying kernel 2.6.37-02063706-generic [OK]
Trying kernel 2.6.36-02063604-generic [OK]
Trying kernel 2.6.35-02063513-generic [OK]
Trying kernel 2.6.34-02063413-generic [OK]
Trying kernel 2.6.33-02063320-generic [OK]
Trying kernel 2.6.32-02063260-generic [OK]
Trying kernel 2.6.31-02063113-generic [OK]
Trying kernel 2.6.30-02063010-generic [OK]
Trying kernel 2.6.29-02062906-generic [OK]
Trying kernel 2.6.28-02062810-generic [OK]
Trying kernel 2.6.27-020627-generic [OK]
Trying kernel 2.6.26-020626-generic [OK]
Trying kernel 2.6.25-020625-generic [OK]
Trying kernel 2.6.24-020624-generic [OK]

real    18m42.239s
user    327m50.029s
sys     53m37.317s

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: fix typo which removed entries on Makefile

The commit below removed by mistake some entries on the top
level Makefile.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: fix alx backport on netdev features

This updates the hunks that deal with the netdevice
features. We no longer need device checks given that
the driver no longer supports atl1c devices.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: fix typo on 0002-enable-alx.patch

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: add disable_drm to driver-select

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: split up admin-update.sh

This splits up admin-update.sh into a few sections
by separating functionality into routine helpers.
This allows us to add base refresh with -b so that
drivers that only need the base code can update the
compat labels.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: add Debian to scripts/update-initramfs

I've tested this on Debian now.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: update refresh-compat scripts

This updates the refresh-compat scripts to account for
having patches in extended directories.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: add support for unified drivers

Companies typically write Linux device drivers either from
scratch of alternatively based on some internal unified
source code tree. Typically the unified driver architecture
is a mess and porting a driver to linux is always a painful
task to the extent at times a full rewrite is required and
at times preferred.

In order to try to help with these type of unified driver
strategies one possibility that has been proposed is to
make the unified driver strategy an open source project and
to not make many compromises on the style and requirements
for Linux. The alx Linux driver [1] is not yet upstream and
is undergoing changes to try to accomodate it to a format
and use new technologies to help address unification attempts
in both an open manner and also lead by the community.

compat-drivers will support these type of driver efforts
only if they adhere to the principles of never compromising
Linux upstream requirements and are targetting getting
upstream into the Linux kernel. Once these drivers are upstream,
their respective git trees will be removed and we'll simply
cherry pick the driver as we do from upstream Linux. If a
compat-drivers releases contains drivers that are from a
unified git repository the release will be postfixed with
a "-u".

[1] http://www.linuxfoundation.org/collaborate/workgroups/networking/alx

Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Adrian Chadd <adrian@freebsd.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: move all patch types under patches/

The number of patch directories for the different life
cycle a patch can be on its way upstream had reached 4:

  * pending-stable
  * linux-next-pending
  * linux-next-cherry-picks
  * crap

Apart from this we also had the backport related patches.
In the future I see potential for other directories for
different categories of patches. Consider how we are
breaking down the backport patches into specific documented
collateral evolutions and of those type of collateral
evolutions there may be different types of collateral
evolutions which we could likely treat / document differently.
Another type of patch that I forsee us having to deal with
are patches for drivers that are not upstrea -- like crap,
but for drivers in a unified driver tree that is *designed*
from scratch to be targetting upstream Linux inclusion using
the same coccinelle technology I forsee us using for backporting
collateral evolutions.

Since the number of patch directories can get out of hand
at the top level lets just stuff then all under patches/
and deal with patches there. This also places the backport
patches into a directory called collateral-evolutions/ to
help promote and educate on the nature of the changes
that we have to deal with when backporting.

Cc: Julia Lawall <julia.lawall@lip6.fr>
Cc: Adrian Chadd <adrian@freebsd.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: refresh patches for next-20121129

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: make patches apply again

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: do not apply patches in natural sort order

Without this patch the patches are applied in the natural sort order of
numbers, which caused this order for patches/network/:
patches/network/0001-netdev_ops.patch
patches/network/02-ksize.patch
patches/network/0002-net-misc.patch
patches/network/0003-netdev-needed_headroom_tailroom.patch
patches/network/03-rfkill.patch
patches/network/04-netns.patch
patches/network/0004-wext-namespace.patch
patches/network/0005-netlink-portid.patch
patches/network/05-usb.patch

The non natural sort order of numbers is more the intended way to order
the patches as now the spdiff patches are in front of all the other
patches. This makes the patches in patches/network/ to be applied in
the flowing order:
patches/network/0001-netdev_ops.patch
patches/network/0002-net-misc.patch
patches/network/0003-netdev-needed_headroom_tailroom.patch
patches/network/0004-wext-namespace.patch
patches/network/0005-netlink-portid.patch
patches/network/02-ksize.patch
patches/network/03-rfkill.patch
patches/network/04-netns.patch
patches/network/05-usb.patch

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: run refresh for all patches

In the past refresh with quilt was just run for the last patch
directory being applied and not for all, because our script had
problems when patchRefresh() was called more then once in a single
admin-update.sh run. This was fixed in the last patch and now it is
safe to run it on all patches.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: prevent mixing patches from different directories in refresh

The refresh script is able to take an already existing quilt run and
just refresh the further needed patches. This is needed to make it
possible to manually fix a patch which is not applying any more and
then automatically integrate it into the patches directory again. With
the integration of drm it could happen that quilt is running on two
different source directories like patches/network and patches/drm in one
call of admin-update.sh. If some of the drm patches did not apply and
needed a manual fix, quilt moved the patch in the second run into the
patches/network directory, because it was taken in the network refresh
run. This patch does not run quilt if there is still an unfinished
quilt job for a different patch directory.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: remove copy of README in refresh

There is no README file in the patches folder like patches/drm/README
any more.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: print original name and path of patch in refresh

In the old version patches.orig/<patch name>.patch was printed as the
current patch quilt is working on in refresh, now e.g. patches/network
/<patch name>.patch is printed.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: do not use struct spinlock

struct spinlock does not exists on kernel version <= 2.6.32, use
spinlock_t instead.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: add import to fix compile error

On kernel version <= 2.6.28, I saw the following compile error without
this patch:

/net/wireless/util.c: In function ‘cfg80211_get_p2p_attr’:
/net/wireless/util.c:1120:4: error: implicit declaration of function
‘get_unaligned_le16’ [-Werror=implicit-function-declaration]

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: refresh patches

This was done by running "./scripts/admin-refresh.sh refresh".

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: build RTL8723AE

This driver is building on all supported kernel versions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: remove option for alx driver

The alx driver was removed from crap and also remove the config option.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: make patches apply again

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: disable mwifiex for kernels older than 2.6.27

mwifiex got Multiqueue support and while we do port multiqueue
I'm really fucking lazy to port this driver particular changes
over given that I really don't think anyone on planet earth will
be using it for kernels older than 2.6.27.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: add rtl8723ae code

Note this driver is disabled for now. I really want to start
applying SmPL for porting this driver for all known collateral
evolutions. At least for the netdev_attach_ops() one.

I'm adding this in to help build the tree as without this the
compilation was failing.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: rename drm config symbols

When config symbols are renamed they should be renamed at all places
and not just at some places.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: add CONFIG_MWIFIEX_USB in config.mk

The driver at least compiles with all supported kernel versions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: add CONFIG_RT2800PCI_RT3290 in config.mk

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: remove CONFIG_WIL6210 from config.mk

The device driver was removed from crap some time ago.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drviers: remove CONFIG_IWM from config.mk

The device driver was removed from the kernel some time ago.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: add CONFIG_BT_WILINK in config.mk

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: activate CONFIG_BT_HCIUART_3WIRE in config.mk

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: remove CONFIG_ATH9K_PKTLOG form config.mk

This option is not available any more.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: refresh patches

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: add ar5523 driver

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: Enable ATI/AMD Radeon for kernels >= 3.2

Signed-off-by: Ozan Çağlayan <ozancag@gmail.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: drm: Revert ACPI table size check for < 3.6

acpi_get_table_with_size() was exported with kernels >= 3.6. Revert the
size checking for kernels < 3.6.

Signed-off-by: Ozan Çağlayan <ozancag@gmail.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: Rename CONFIG_DRM_RADEON_KMS

Prefix it with CONFIG_COMPAT_ to allow setting it correctly.

Signed-off-by: Ozan Çağlayan <ozancag@gmail.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: Update README

Add GPU subsystem information to README.md.

Signed-off-by: Ozan Çağlayan <ozancag@gmail.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: Enable nouveau DRM driver for kernels >= 3.3

Enable Nouveau DRM driver for kernels >= 3.3.

Signed-off-by: Ozan Çağlayan <ozancag@gmail.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: Fix comments

The comments were wrong causing a misunderstanding while analyzing
the script's function.

Signed-off-by: Ozan Çağlayan <ozancag@gmail.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: Rename CONFIG_DRM_NOUVEAU_BACKLIGHT

This was forgotten during the generation of the renaming patch.

Signed-off-by: Ozan Çağlayan <ozancag@gmail.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: Add missing config check

No configuration change was retriggering config update because
of this missing line unless you give the 'bt' target.

Signed-off-by: Ozan Çağlayan <ozancag@gmail.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: Rename CONFIG_* vars in nouveau driver

Nouveau used 2 Kconfig defined vars to set debugging log levels.
Rename to for being able to set them from config.mk correctly.

Signed-off-by: Ozan Çağlayan <ozancag@gmail.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: Handle int's when generating compat_autoconf.h

Some Kconfig variables take integer values instead of y/m/N like
CONFIG_NOUVEAU_DEBUG and CONFIG_NOUVEAU_DEBUG_DEFAULT. Currently all
values other than y/m/N were escaped with double-quotes to define
them as strings. Fix this to allow integer values for Kconfig
variables.

Signed-off-by: Ozan Çağlayan <ozancag@gmail.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: Copy core/ subdir of nouveau driver

This was introduced with the latest nouveau code rewrite. Copy
this directory too.

Signed-off-by: Ozan Çağlayan <ozancag@gmail.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: deactivate cfg80211 tracing for kernels <= 2.6.32

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: make patches apply again

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: Enable CONFIG_DRM_LOAD_EDID_FIRMWARE

This was added in 3.4. Rename the option in the relevant source file
and enable CONFIG_COMPAT_DRM_LOAD_EDID_FIRMWARE in config.mk to build
the symbol into DRM_KMS_HELPER kernel module.

Signed-off-by: Ozan Çağlayan <ozancag@gmail.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: Separate code metrics for each subsystem

Add a subsystem marker before code metrics to differentiate between
multiple subsystems, e.g. drm, network, etc.:

compat-drivers code metrics

   1181683 - Total upstream lines of code being pulled

   network
   ----------------------------------------
      3109 - backport code changes
      2580 - backport code additions
       529 - backport code deletions
     12754 - backport from compat module
     15863 - total backport code
    1.3424 - % of code consists of backport work

   drm
   ----------------------------------------
       301 - backport code changes
       219 - backport code additions
        82 - backport code deletions
     12754 - backport from compat module
     13055 - total backport code
    1.1048 - % of code consists of backport work

Signed-off-by: Ozan Çağlayan <ozancag@gmail.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: fix admin-update.sh network

Sujith reported that building after admin-update.sh network
we get a build error with drm. Fix this by creating an empy
drm Makefile.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: add target path for ChangeLog file

Forgot to add the target directory for kup upload on the
ChangeLog file.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: fix ChangeLog file name

This will now produce something like: ChangeLog-v3.7-rc1-4

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: add genlog

This will generate log files for our releases.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: add / to target stable release end dir

This should fix uploading via kup using scripts/gen-release.sh

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: add support for uploading stable releases

This adds support for uploading stable compat-drivers releases.
The new stable releases will go on:

http://www.kernel.org/pub/linux/kernel/projects/backports/stable/

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: fix sed for gen-release.sh

The replacement was removing the 's' from the compat-drivers
name, and generating 'compat-driers'. We don't yet backport
support for laundry machines so fix this.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: add rfkill.h from UAPI path

The rfkill.h header was moved to the UAPI path,
copy it over. But there is one more issue we would
need to address.

The UAPI changes split up the kernel and userspace API
headers into separate directories. We provide backport
support for the new rfkill module to kernels older than
2.6.31. To allow us to dynamically provide only backport
support for those kernels we have a trick within compat
to provide its own include/linux/rfkill.h header which
then will include either your own kernel's rkfill.h or
include the one we are taking from linux-next. The one
we take from linux-next is renamed to rfkill_backport.h.
In order to allow the call to include your own kernel's
rfkill.h the compat rfkill.h uses include_next. The UAPI
changes would mean though that instead of getting your
own kernel's rfkill.h you'd end up getting the UAPI
header file. Fix this by ensuring that for new kernels
we linux_next into the user's kernels rfkill.h and if
the kernel is old we still to the rfkill_backport.h
naming scheme.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: remove wil6210 driver from scripts/driver-select

This can be reverted once wil6210 get into Linux upstream.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: remove alx driver from scripts / Makefile

This can be reverted once the driver gets onto Linux upstream.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: remove full drivers from crap

Moving forward no full drivers will be accepted
into crap/. As the alx drivers has proven this only
slows down access to getting users a proper driver.
Restricting the driver to be made available only
through compat-drivers has provided less visibility
and access to the drivers.

The purpose of adding drivers into crap/ over upstream
drivers/staging/ was that some developers may prefer to
not go through the staging development process if they
were sure they could meet the proper upstream quailty
criteria in a timely manner. Practice shows that even
if this is claimed in the end the driver just ends up
bit rotting away in crap/ over a few kernel releases.

Lets stop that. If you want your driver accessible or
automatically backported you have two options:

  * Linux upstream drivers/staging/
  * Linux upstream proper

Choose wisely.

The additional patch directories then remain useful
only for patches content that is already present on
Linux upstream, nothing more.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: add uapi/dri to WSTABLE

This will let us ensure we can query these files for
stable patch generation purposes.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: fix handing of include/uapi

The kernel make file uses an include path of kernel/include,
kernel/include/uapi (I removed all the other unrelated paths). Now
compat-drivers should also use this path otherwise we have to patch
many files. With this patch for compat-drivers it creates a include
path like this: w-d/include, w-d/include/uapi, kernel/include,
kernel/include/uapi that way this is similar to the way the kernel does
it.
When copying all the upai headers like it was done before in compat-
drivers, some headers in c-d/include/uapi will overwrite some important
headers in the kernel, we should just copy the files we actually need.
With this patch compat-drivers compiles for me against my Ubuntu 3.2
kernel, it still fails on some other kernel versions, with as I see it,
uapi unrelated errors.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: make patches apply again

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: add UAPI backport fixes

The patch was posted for inclusion upstream. The
DRM code uses some include headers and if we are
not specific about the path what ends up happening
is our old kernel header files gets used instead of
the new UAPI header files.

For details on the UAPI changes:

http://lwn.net/Articles/507794/

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: copy over uapi headers

For details on the new UAPI changes see:

http://lwn.net/Articles/507794/

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: refresh patches for next-20121011

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>

compat-drivers: change condition for  release target

When making a kernel.org release you should use gen-release.sh -u,
so just checking for the usage of that variable is better.

Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com>