Luka Perkov [Fri, 3 May 2013 15:16:48 +0000 (15:16 +0000)]
Config.in: fix formating
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 36538
Felix Fietkau [Fri, 3 May 2013 10:39:57 +0000 (10:39 +0000)]
hostapd: enable 802.11r for the -full variant (#13250)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36533
Felix Fietkau [Fri, 3 May 2013 09:14:03 +0000 (09:14 +0000)]
mac80211: merge a client mode channel switch handling fix
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36531
Felix Fietkau [Fri, 3 May 2013 09:12:19 +0000 (09:12 +0000)]
ar71xx: add an external reset callback for ar913x and use it in ath9k - should reduce the frequency of DMA stop failures
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36530
Felix Fietkau [Thu, 2 May 2013 15:59:57 +0000 (15:59 +0000)]
kernel: do not strip /proc/net/ip_mr_* in the /proc debloat patch, it is used by iproute2
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36529
Jonas Gorski [Thu, 2 May 2013 15:28:31 +0000 (15:28 +0000)]
bcm63xx: split into two subtargets, generic and SMP
Make SMP a subtarget, since it only supports BCM6362 and BCM6368.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36527
Jonas Gorski [Thu, 2 May 2013 15:28:26 +0000 (15:28 +0000)]
bcm63xx: add SMP support for BCM6362 and BCM6368
BCM6358 requires further work due to its shared TLB.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36526
Jonas Gorski [Thu, 2 May 2013 15:28:12 +0000 (15:28 +0000)]
kernel: generic: don't strip /proc/irq on SMP
/proc/irq is needed for changing the SMP affinity of interrupts.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36525
Jonas Gorski [Thu, 2 May 2013 15:28:10 +0000 (15:28 +0000)]
bcm63xx: fix hsspi flash registration for BCM6362
Use busnum 1 for HSSPI so it won't conflict on chips having both SPI
controllers.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36524
Jonas Gorski [Thu, 2 May 2013 15:28:07 +0000 (15:28 +0000)]
bcm63xx: fix/enable livebox minipci
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
SVN-Revision: 36523
Felix Fietkau [Thu, 2 May 2013 14:06:10 +0000 (14:06 +0000)]
scripts/config: fix an option processing error that caused duplication in diffconfig.sh output (#13384)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36522
Jo-Philipp Wich [Thu, 2 May 2013 13:42:20 +0000 (13:42 +0000)]
firewall3: update to git head
- assume "tcp+udp" if no protcol is specified in rules or redirects (#13422, #13386)
- add support for fwmark matches and mark setting targets
SVN-Revision: 36521
Jo-Philipp Wich [Thu, 2 May 2013 12:40:13 +0000 (12:40 +0000)]
uci: update to git head
- copy permission of config files to state files to allow access to state info by non root users
- properly handle empty string case when unsetting lists
SVN-Revision: 36518
Felix Fietkau [Thu, 2 May 2013 12:39:31 +0000 (12:39 +0000)]
tools/mtools: disable iconv support, it breaks on some systems
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36516
Jo-Philipp Wich [Thu, 2 May 2013 11:46:53 +0000 (11:46 +0000)]
atheros: remove static gpio_request() from board setup and include generic kmod-gpio-button-hotplug instead.
This change is based on a patch by Karl Palsson <karlp@remake.is>
See http://patchwork.openwrt.org/patch/3536/.
SVN-Revision: 36513
Jo-Philipp Wich [Thu, 2 May 2013 11:25:18 +0000 (11:25 +0000)]
kernel: netfilter.mk: Explicitly set the order of autoloaded modules
In my machine, the file is created with arptable_filter before
arp_tables. This can't happen because the former depends on the
latter.
So, instead of rely on wildcards (*.ko), set by hand the files to
be loaded in the correct order.
Signed-off-by: Jonh Wendell <jonh.wendell@oiwifi.com.br>
SVN-Revision: 36512
Jo-Philipp Wich [Thu, 2 May 2013 11:25:13 +0000 (11:25 +0000)]
toolchain: add missing patch to gcc v4.8.0
SVN-Revision: 36511
Jo-Philipp Wich [Thu, 2 May 2013 08:10:55 +0000 (08:10 +0000)]
Fix install of iptables pkg-config files.
libiptc.pc depends on libip[4|6]tc.pc, thus all of those need to be
installed.
Should fix collectd build and thus #13146; which should make collectd
appear in snapshots again.
Signed-off-by: Danny Baumann <dannybaumann@web.de>
SVN-Revision: 36509
Gabor Juhos [Wed, 1 May 2013 22:15:18 +0000 (22:15 +0000)]
kernel: update linux 3.8 to 3.8.11
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36507
Florian Fainelli [Wed, 1 May 2013 21:52:25 +0000 (21:52 +0000)]
brcm63xx: fix typo and missing BCM6328 check in BCM6345 ethernet patch
And while at it, also include a define check for BCM6328, thanks to
Gabor for spotting this.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36506
Florian Fainelli [Wed, 1 May 2013 21:12:40 +0000 (21:12 +0000)]
brcm63xx: add missing binary operands to BCM6345 ethernet patch
Thanks to Emilio Arias for reporting it.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36505
Florian Fainelli [Wed, 1 May 2013 21:12:26 +0000 (21:12 +0000)]
brcm63xx: remove 3.7 kernel support
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36504
Gabor Juhos [Tue, 30 Apr 2013 11:29:38 +0000 (11:29 +0000)]
kernel: add md5sum for 3.9 final
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36499
Gabor Juhos [Tue, 30 Apr 2013 10:44:11 +0000 (10:44 +0000)]
ar71xx: rename WNR2000v3 support patch
Update the numbering of kernel patch for supporting
Netgear WNR2000v3 from 617 to 618.
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36498
Gabor Juhos [Tue, 30 Apr 2013 10:44:10 +0000 (10:44 +0000)]
firmware-utils/mktplinkfw: add description for -W option into usage output
Add description for -W <hwrev> option into usage output of mktplinkfw.
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36497
Gabor Juhos [Tue, 30 Apr 2013 10:44:09 +0000 (10:44 +0000)]
x86/geos: switch to 3.8.10
Compile tested only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36496
Gabor Juhos [Tue, 30 Apr 2013 10:44:08 +0000 (10:44 +0000)]
linux/3.9: implement pcibios_get_phb_of_node for MIPS
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36495
Gabor Juhos [Tue, 30 Apr 2013 10:44:07 +0000 (10:44 +0000)]
linux/3.8: use backported pcibios_get_phb_of_node patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36494
Gabor Juhos [Tue, 30 Apr 2013 10:43:59 +0000 (10:43 +0000)]
kernel: update linux 3.8 to 3.8.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36493
Gabor Juhos [Tue, 30 Apr 2013 10:43:58 +0000 (10:43 +0000)]
at91: add missing config symbols
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36492
Gabor Juhos [Tue, 30 Apr 2013 10:43:57 +0000 (10:43 +0000)]
linux/3.{8,9}: add missing symbols
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36491
Gabor Juhos [Tue, 30 Apr 2013 10:43:56 +0000 (10:43 +0000)]
linux/3.{8,9}: turn on CONFIG_NET_SCH_FQ_CODEL
It is forced to 'y' since r36342.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36490
John Crispin [Tue, 30 Apr 2013 10:34:20 +0000 (10:34 +0000)]
ramips: move dlink profile to correct sub folder - 2nd try
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36489
John Crispin [Tue, 30 Apr 2013 08:24:26 +0000 (08:24 +0000)]
ramips: move dlink profile to correct sub folder
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36487
Jonas Gorski [Mon, 29 Apr 2013 15:40:21 +0000 (15:40 +0000)]
toolchain: gcc: backport fixes for gcc bug 54295
Fix "Widening multiply-accumulate operation uses wrong value extension"
for 4.7, 4.7-linaro and 4.6-linaro, which backported the broken code to 4.6.
Vanilla 4.6 is unaffected.
Fixes #13420.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36486
Mirko Vogt [Mon, 29 Apr 2013 02:17:02 +0000 (02:17 +0000)]
move packages related to telephony into its own feed
remove telephony related packages from packages.svn
and add new feed 'telephony.git' to feeds.conf.default
SVN-Revision: 36485
Hauke Mehrtens [Sun, 28 Apr 2013 21:11:17 +0000 (21:11 +0000)]
broadcom-diag: support for the WNDR3700v3
I recently picked up a WNDR3700 to put OpenWRT on, and only after tearing into the box did I find it
was one of the v3 boards, with poor OpenWRT support. This patch should add the board detection and
LED/button control to the broadcom-diag module, and should generate a netgear .chk image that the
bootloader and stock firmware will accept.
The changes to the broadcom-diag module are more than a few lines because the WNDR3700v3 is driving
its LEDs through an HC164 8-bit shift register.
Signed-off-by: Owen Kirby <osk@exegin.com>
SVN-Revision: 36482
Hauke Mehrtens [Sun, 28 Apr 2013 18:53:20 +0000 (18:53 +0000)]
acx-mac80211: make it compile with recent mac80211 again
SVN-Revision: 36481
Hauke Mehrtens [Sun, 28 Apr 2013 18:25:16 +0000 (18:25 +0000)]
brcm47xx: use kernel 3.8.10 as default kernel
The biggest change with this kernel is a new partition parser.
SVN-Revision: 36480
Hauke Mehrtens [Sun, 28 Apr 2013 18:21:34 +0000 (18:21 +0000)]
broadcom-wl: read channel using wlc on detect
Hardcoding channel number to 11 is a bad idea, it may be even not
available on some devices. If there are two single-band radios, the
one for 5GHz doesn't have 11 channel.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 36479
Hauke Mehrtens [Sun, 28 Apr 2013 18:19:31 +0000 (18:19 +0000)]
brcm47xx: add board detection for NETGEAR WNDR4500 V2
SVN-Revision: 36478
Hauke Mehrtens [Sun, 28 Apr 2013 17:59:24 +0000 (17:59 +0000)]
mac80211: brcmsmac: remove initial support for core rev 28
To add support for core rev 28 there are a lot more changes needed.
SVN-Revision: 36477
Hauke Mehrtens [Sun, 28 Apr 2013 17:57:30 +0000 (17:57 +0000)]
mac80211: b43: only use gpio 0 and 1 for the wifi led
sometimes b43 truned the gpio for the switch reset on.
SVN-Revision: 36476
Hauke Mehrtens [Sun, 28 Apr 2013 17:01:56 +0000 (17:01 +0000)]
kernel: fix a memory leak in split_rootfs_data()
allocate_partition() copies all the content of dpart into a new struct.
SVN-Revision: 36475
Hauke Mehrtens [Sun, 28 Apr 2013 16:55:53 +0000 (16:55 +0000)]
mac80211: b43: Handle DMA RX descriptor underrun
SVN-Revision: 36474
Hauke Mehrtens [Sun, 28 Apr 2013 16:52:11 +0000 (16:52 +0000)]
kernel: update bcma and ssb for kernel 3.8+ to version from wireless-testing master-2013-04-26.
SVN-Revision: 36473
Jo-Philipp Wich [Sun, 28 Apr 2013 14:04:39 +0000 (14:04 +0000)]
iwinfo: fix iwinfo_hardware() return value if chip id is not found
SVN-Revision: 36471
Jonas Gorski [Sun, 28 Apr 2013 11:55:23 +0000 (11:55 +0000)]
kernel: update linux 3.9 patches to rc8
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36469
Jonas Gorski [Sun, 28 Apr 2013 11:10:42 +0000 (11:10 +0000)]
kernel: add missing bcma defines and header file for bcrmfmac
Fixes build failure when having kmod-mmc and brcmfmac selected.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36468
Felix Fietkau [Sat, 27 Apr 2013 09:56:18 +0000 (09:56 +0000)]
ath9k: fix keycache handling with many connected clients
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36467
Felix Fietkau [Sat, 27 Apr 2013 09:56:14 +0000 (09:56 +0000)]
mac80211: refresh patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36466
Jo-Philipp Wich [Sat, 27 Apr 2013 09:28:40 +0000 (09:28 +0000)]
netifd: update to git head - disables multicast snooping by default on bridges
SVN-Revision: 36463
Gabor Juhos [Fri, 26 Apr 2013 17:00:54 +0000 (17:00 +0000)]
ar71xx: add user-space support for WNR2000v3
Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36461
Gabor Juhos [Fri, 26 Apr 2013 17:00:53 +0000 (17:00 +0000)]
ar71xx: add profile and build image for WNR2000v3
Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36460
Gabor Juhos [Fri, 26 Apr 2013 17:00:52 +0000 (17:00 +0000)]
ar71xx: Add Netgear WNR2000v3 support
Network connectivity works fine (LAN and WAN).
For GPIOs, only pwr led and the green wan leds are supported for now.
Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36459
Gabor Juhos [Fri, 26 Apr 2013 17:00:50 +0000 (17:00 +0000)]
ar71xx: add profile and build image for the TL-WR720N v3 board
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36458
Gabor Juhos [Fri, 26 Apr 2013 17:00:49 +0000 (17:00 +0000)]
ar71xx: add user-space support for the TL-WR720N v3 board
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36457
Gabor Juhos [Fri, 26 Apr 2013 17:00:48 +0000 (17:00 +0000)]
ar71xx: add kernel support for TPLINK WR720N v3
Add support for TPLINK WR720N v3 which has 4MB flash,
32MB ram, 2 ethernet interfaces, 1 USB 2.0 port.
The patch is mostly a modification from mach-tl-wr703n.c.
GPIO numbers for the slider switch is from mach-tl-mr3020n.c.
Tested on my device and they worked fine.
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36456
Gabor Juhos [Fri, 26 Apr 2013 17:00:47 +0000 (17:00 +0000)]
firmware-utils/mktplinkfw: add support for the TL-WR720N v3 board
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36455
Gabor Juhos [Fri, 26 Apr 2013 16:57:43 +0000 (16:57 +0000)]
mpc85xx: Add subtargets Generic and P1020
Only difference between Generic and P1020 is that P1020
enables SMP with two CPUs in the kernel config.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36454
Gabor Juhos [Fri, 26 Apr 2013 16:55:42 +0000 (16:55 +0000)]
kernel: update linux 3.8 to 3.8.9
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36453
Gabor Juhos [Fri, 26 Apr 2013 16:55:40 +0000 (16:55 +0000)]
at91: upgrade to kernel 3.8.7 and use devicetree
This upgrades the AT91 target to 3.8.7, and migrates to device tree.
This allows a single kernel to be built for most at91 variants which
simplifies things quite a bit. The immediate result is that all
subtargets are nuked, and any boards without dts files are no longer
supported, though the target now includes more boards than before. The
adc driver was also nuked as 3.8.7 includes a new one under the IIO
subsystem.
Signed-off-by: Adam Porter <porter.adam@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36452
Gabor Juhos [Fri, 26 Apr 2013 16:55:28 +0000 (16:55 +0000)]
ramips: rt3883: fix build error
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36451
Jo-Philipp Wich [Fri, 26 Apr 2013 13:21:01 +0000 (13:21 +0000)]
iwinfo: add hw database file
SVN-Revision: 36450
Jo-Philipp Wich [Fri, 26 Apr 2013 13:20:15 +0000 (13:20 +0000)]
iwinfo: move builtin hardware database to /usr/share/libiwinfo/hardware.txt
SVN-Revision: 36449
Felix Fietkau [Fri, 26 Apr 2013 10:52:03 +0000 (10:52 +0000)]
mac80211: update to wireless-testing 2013-04-16 + backports
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36448
John Crispin [Thu, 25 Apr 2013 19:51:08 +0000 (19:51 +0000)]
procd: fix wrap around bug in logread time handling code
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36447
John Crispin [Thu, 25 Apr 2013 19:16:54 +0000 (19:16 +0000)]
hotplug2: make it depend on !PROCD_INIT
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36446
John Crispin [Thu, 25 Apr 2013 19:03:41 +0000 (19:03 +0000)]
lantiq: make leds and network work on VG3503J
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36445
John Crispin [Thu, 25 Apr 2013 19:03:37 +0000 (19:03 +0000)]
lantiq: fix board detection helpers
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36444
John Crispin [Thu, 25 Apr 2013 19:03:32 +0000 (19:03 +0000)]
lantiq: move dts files to thir own folder
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36443
John Crispin [Thu, 25 Apr 2013 19:03:29 +0000 (19:03 +0000)]
generic: fix rtl8366_smi compile warning
drivers/net/phy/rtl8366_smi.c: In function 'rtl8366_sw_set_vlan_ports':
drivers/net/phy/rtl8366_smi.c:1125:6: warning: 'pvid' may be used uninitialized in this function [-Wuninitialized]
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36442
John Crispin [Thu, 25 Apr 2013 19:03:25 +0000 (19:03 +0000)]
lantiq: disable sw portmaps on xrx200 ethernet as segment solation does not work yet
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36441
John Crispin [Thu, 25 Apr 2013 19:03:21 +0000 (19:03 +0000)]
lantiq: make lzma-loader based images for VG3503J
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36440
John Crispin [Thu, 25 Apr 2013 19:03:17 +0000 (19:03 +0000)]
lantiq: update VG3503J.dts to match new partition layout
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36439
John Crispin [Thu, 25 Apr 2013 19:03:13 +0000 (19:03 +0000)]
lantiq: add lzma-loader source
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36438
John Crispin [Thu, 25 Apr 2013 19:03:09 +0000 (19:03 +0000)]
ramips: add profile for Dlink DIR-615 H1
Hello,
this adds the profile for Dlink DIR-615 H1 without the usb default packages
since this router does not have a usb port and while all the needed definitions
for building are already in target/linux/ramips/image/Makefile this also allows
users to select the exact target in RT305x based boards menuconfig for this router
and compile its firmware.
Signed-off-by: Daniel Petre <dani@ip6.ro>
Patchwork: http://patchwork.openwrt.org/patch/3529/
Acked-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36437
John Crispin [Thu, 25 Apr 2013 19:03:05 +0000 (19:03 +0000)]
ramips: remove now unneeded user-space board detection
Now that ALL5002 and ALL5003 each got their own DTS and board names, remove
the now no longer needed user-space part which previously differentiated between
ALL5002 and ALL5003.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Patchwork: http://patchwork.openwrt.org/patch/3558/
Acked-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36436
John Crispin [Thu, 25 Apr 2013 19:03:01 +0000 (19:03 +0000)]
ramips: introduce DTS for ALL5003
Prior to the switch to 3.8, ALL5002 and ALL5003 boards shared mach-all5002.c.
With the change to DTS, this is no longer accurate, as ALL5002 is based on
Rt3352 SoC while ALL5003 is based on Rt5350 SoC, therefore the corresponding
rt5350.dtsi need to be included for ALL5003.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Patchwork: http://patchwork.openwrt.org/patch/3557/
Acked-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36435
John Crispin [Thu, 25 Apr 2013 19:02:57 +0000 (19:02 +0000)]
ramips: set preinit interface to eth0 by default.
This makes any ramips device accessible via ethernet in failsafe mode.
Based on: https://dev.openwrt.org/changeset/36322
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3567/
Acked-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36434
John Crispin [Thu, 25 Apr 2013 19:02:53 +0000 (19:02 +0000)]
ramips: Add Alpha ASL-26555 support.
This board uses a TrendChip SOC with its own RAM/Flash for ADSL support.
We know both SOCs are connected through ethernet and use some kind of protocol for UART communication, but due to the lack of GPL sources we couldn't get it to work. For this reason the network is configured only for LAN.
There are two versions (Chile 8MB and Spain 16MB).
Wiki: http://wiki.openwrt.org/toh/alpha/asl26555
Signed-off-by: Esteban Benito <estebanjbs@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3571/
Acked-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36433
John Crispin [Thu, 25 Apr 2013 19:02:48 +0000 (19:02 +0000)]
ramips: Add support of D-link DIR-620D1
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>
Acked-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36432
John Crispin [Thu, 25 Apr 2013 19:02:42 +0000 (19:02 +0000)]
ramips: sync kernel patches with the mips-next tree
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36431
John Crispin [Thu, 25 Apr 2013 19:02:37 +0000 (19:02 +0000)]
preinit: move cmdline failsafe= handling ot the generic code
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36430
John Crispin [Thu, 25 Apr 2013 19:02:32 +0000 (19:02 +0000)]
mount_root: prepare base-files
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36429
John Crispin [Thu, 25 Apr 2013 19:02:28 +0000 (19:02 +0000)]
boot: make use of kmodloader if it is available
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36428
John Crispin [Thu, 25 Apr 2013 19:02:24 +0000 (19:02 +0000)]
ubox: add ubox package
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36427
John Crispin [Thu, 25 Apr 2013 19:02:20 +0000 (19:02 +0000)]
procd: update to latest git version
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36426
Felix Fietkau [Thu, 25 Apr 2013 16:28:19 +0000 (16:28 +0000)]
netifd: update to the latest version, fixes interface reload issues when removing the ifname option
SVN-Revision: 36424
Steven Barth [Wed, 24 Apr 2013 18:22:08 +0000 (18:22 +0000)]
6relayd: Fix generation of RA-messages
SVN-Revision: 36419
Jo-Philipp Wich [Wed, 24 Apr 2013 14:44:20 +0000 (14:44 +0000)]
iwinfo: add SR71-15 radio info, fix nl80211 channel/frequency reporting on some architectures
SVN-Revision: 36417
Steven Barth [Wed, 24 Apr 2013 14:17:24 +0000 (14:17 +0000)]
firewall3: Make IPv6 ULA-Border generation dynamic
This fixes working behind another router which gives out ULAs.
SVN-Revision: 36416
Jo-Philipp Wich [Wed, 24 Apr 2013 09:49:09 +0000 (09:49 +0000)]
Enable hidraw support.
It's needed for dealing with certain UART-to-USB adapters built into
e.g. weather stations, and increases the hid module package only
slightly (e.g. on ar71xx: 35k -> 37k).
Signed-off-by: Danny Baumann <dannybaumann@web.de>
SVN-Revision: 36415
Jo-Philipp Wich [Wed, 24 Apr 2013 09:49:03 +0000 (09:49 +0000)]
Add kernel module package for hid-generic driver.
Needed to support e.g. keyboards and mice.
Signed-off-by: Danny Baumann <dannybaumann@web.de>
SVN-Revision: 36414
Steven Barth [Wed, 24 Apr 2013 07:21:42 +0000 (07:21 +0000)]
6relayd: update package description
SVN-Revision: 36413
Steven Barth [Wed, 24 Apr 2013 05:55:39 +0000 (05:55 +0000)]
dnsmasq: update to 2.66 Thanks to Christoph König for patches.
SVN-Revision: 36412
Steven Barth [Wed, 24 Apr 2013 05:02:45 +0000 (05:02 +0000)]
odhcp6c: Set default SOL_MAX_RT to 1h
SVN-Revision: 36411
Felix Fietkau [Tue, 23 Apr 2013 18:35:50 +0000 (18:35 +0000)]
hostapd: return the frequency to some ubus calls to make integration easier
SVN-Revision: 36410
Felix Fietkau [Tue, 23 Apr 2013 16:32:24 +0000 (16:32 +0000)]
mac80211: use the original mac address for the first virtual interface
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36408
Jonas Gorski [Tue, 23 Apr 2013 13:55:36 +0000 (13:55 +0000)]
bcm63xx: update patches with upstream submissions
SVN-Revision: 36407
projects / openwrt / staging / jogo.git / log