drm/vc4: plane_state->fb iff plane_state->crtc

Checking both is one too much, so wrap a WARN_ON around it to stope
the copypasta.

Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213172612.1514842-7-daniel.vetter@ffwll.ch

drm/rockchip: plane_state->fb iff plane_state->crtc

Checking both is one too much, so wrap a WARN_ON around it to stope
the copypasta.

Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20191213172612.1514842-6-daniel.vetter@ffwll.ch

drm/imx: plane_state->fb iff plane_state->crtc

Checking both is one too much, so wrap a WARN_ON around it to stope
the copypasta.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20191213172612.1514842-4-daniel.vetter@ffwll.ch

drm/todo: Add item for the plane->atomic_check confusion

It's frankly a mess, and the confusion around plane_state->crtc/fb
that I fixed up in this series is the least of the problems. Add a
todo as a future note of how this could be done a lot better, and with
a lot less driver confusion.

Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191213172612.1514842-1-daniel.vetter@ffwll.ch

MAINTAINERS: add entry for tidss

Add entry for tidss DRM driver.

Version history:

v2: no change

v3: - Move tidss entry after omapdrm
    - Add "T:     git git://anongit.freedesktop.org/drm/drm-misc"

v4: no change

v5: no change

v6: no change

v7: no change

v8: - Add Reviewed-by: Benoit Parrot <bparrot@ti.com>

v9: - Add Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c22f7aa31af09cd4adcca6b1a6b0721d9429f055.1580129724.git.jsarha@ti.com

drm/tidss: New driver for TI Keystone platform Display SubSystem

This patch adds a new DRM driver for Texas Instruments DSS IPs used on
Texas Instruments Keystone K2G, AM65x, and J721e SoCs. The new DSS IP is
a major change to the older DSS IP versions, which are supported by
the omapdrm driver. While on higher level the Keystone DSS resembles
the older DSS versions, the registers are completely different and the
internal pipelines differ a lot.

DSS IP found on K2G is an "ultra-light" version, and has only a single
plane and a single output. The K3 DSS IPs are found on AM65x and J721E
SoCs. AM65x DSS has two video ports, one full video plane, and another
"lite" plane without scaling support. J721E has 4 video ports, 2 video
planes and 2 lite planes. AM65x DSS has also an integrated OLDI (LVDS)
output.

Version history:

v2: - rebased on top of drm-next-2019-11-27
    - sort all include lines in all files
    - remove all include <drm/drmP.h>
    - remove select "select VIDEOMODE_HELPERS"
    - call dispc_vp_setup() later in tidss_crtc_atomic_flush() (there is no
      to call it in new modeset case as it is also called in vp_enable())
    - change probe sequence and drm_device allocation (follow example in
      drm_drv.c)
    - use __maybe_unused instead of #ifdef for pm functions
    - remove "struct drm_fbdev_cma *fbdev;" from driver data
    - check panel connector type before connecting it

v3: no change

v4: no change

v5: - remove fifo underflow irq handling, it is not an error and
      it should be used for debug purposes only
    - memory tuning, prefetch plane fifo up to high-threshold value to
      minimize possibility of underflows.

v6: - Check CTM and gamma support from dispc_features when creating crtc
    - Implement CTM support for k2g and fix k3 CTM implementation
    - Remove gamma property persistence and always write color properties
      in a new modeset

v7: - Fix checkpatch.pl --strict issues
    - Rebase on top of drm-misc-next-2020-01-10

v8: - Remove idle debug prints from dispc_init()
    - Add Reviewed-by: Benoit Parrot <bparrot@ti.com>

v9: - Rename dispc_write_irqenable() to dispc_set_irqenable() to avoid
      conflict exported omapfb function with same name
    - Add Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

Co-developed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/925fbfad58ff828e8e07fdff7073a0ee65750c3d.1580129724.git.jsarha@ti.com

dt-bindings: display: ti,j721e-dss: Add dt-schema yaml binding

Add dt-schema yaml bindig for J721E DSS, J721E version TI Keystone
Display SubSystem.

Version history:

v2: no change

v3: - reg-names: "wp" -> "wb"
    - Add ports node
    - Add includes to dts example
    - reindent dts example

v4: - Add descriptions to reg, clocks, and interrupts properties
    - Remove minItems when its value is the same as maxItems value

v5: - itemize reg, clocks and interrupts properties' descriptions
    - there is no "vp" reg-name, only "wb" for write back

v6: - Add Reviewed-by: from Rob Herring <robh@kernel.org> and
      Benoit Parrot <bparrot@ti.com>

v7: no change

v8: no change

v9: no change

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fcba52837808853a4b2bf729bd33bd986cbdadf4.1580129724.git.jsarha@ti.com

dt-bindings: display: ti,am65x-dss: Add dt-schema yaml binding

Add dt-schema yaml bindig for AM65x DSS, AM65x version TI Keystone
Display SubSystem.

Version history:

v2: no change

v3: - Add ports node
    - use allOf in ti,am65x-oldi-io-ctrl to add both $ref and maxItems
    - Add includes to dts example
    - reindent dts example

v4: - Add descriptions to reg and clocks properties
    - Remove minItems when its value is the same as maxItems value

v5: - itemize reg and clocks properties' descriptions

v6: - Add Reviewed-by: from Rob Herring <robh@kernel.org> and
      Benoit Parrot <bparrot@ti.com>

v7: no change

v8: no change

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1799656fb8cc42ca698fc29bbc80c1bae442d6d3.1580129724.git.jsarha@ti.com

dt-bindings: display: ti,k2g-dss: Add dt-schema yaml binding

Add dt-schema yaml bindig for K2G DSS, an ultra-light version of TI
Keystone Display SubSystem.

Version history:

v2: no change

v3: - Add ports node
    - Add includes to dts example
    - reindent dts example

v4: - Add descriptions to reg and clocks properties
    - Remove minItems when its value is the same as maxItems value
    - Remove ports node

v5: - itemize reg and clocks properties' descriptions

v6: - Add Reviewed-by: from Rob Herring <robh@kernel.org> and
      Benoit Parrot <bparrot@ti.com>

v7: no change

v8: no change

v9: - Remove ports-node from the dts example

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/270297321f0768c10e241d289e3ac10e39cf12a9.1580129724.git.jsarha@ti.com

drm/lima: increase driver version to 1.1

Increase driver version for mesa driver to identify
the support of new heap buffer interface.

Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Andreas Baierl <ichgeh@imkreisrum.de>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116131157.13346-6-yuq825@gmail.com

drm/lima: recover task by enlarging heap buffer

Increase heap buffer backup memory when GP receive PLBU
out of memory interrupt, then resume the task.

Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Andreas Baierl <ichgeh@imkreisrum.de>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116131157.13346-5-yuq825@gmail.com

drm/lima: support heap buffer creation

heap buffer is used as output of GP and input of PP for
Mali Utgard GPU. Size of heap buffer depends on the task
so is a runtime variable.

Previously we just create a large enough buffer as heap
buffer. Now we add a heap buffer type to be able to
increase the backup memory dynamically when GP fail due
to lack of heap memory.

Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Andreas Baierl <ichgeh@imkreisrum.de>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116131157.13346-4-yuq825@gmail.com

drm/lima: add lima_vm_map_bo

For dynamically mapping added backup memory of lima_bo to vm.
This is a preparation for adding heap buffer support.

Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Andreas Baierl <ichgeh@imkreisrum.de>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116131157.13346-3-yuq825@gmail.com

drm/lima: update register info

From Mali r10p0 kernel driver source code.

Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Andreas Baierl <ichgeh@imkreisrum.de>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116131157.13346-2-yuq825@gmail.com

drm/debugfs: also take per device driver features into account

Use drm_core_check_all_features() to ensure both the driver features and
the per-device driver features are taken into account when registering
debugfs files.

v3:
- files[i].driver_features == 0 actually means "don't care"

v2:
- use drm_core_check_all_features()

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123124801.14958-2-jani.nikula@intel.com

drm: add drm_core_check_all_features() to check for a mask of features

Add new drm_core_check_all_features() function to check for a mask of
features. All features in the mask are required.

Redefine existing drm_core_check_feature() in terms of this function,
using the drm_driver_feature enum for the parameter.

v3:
- add drm_core_check_all_features() (Thomas)

v2:
- fix kernel-doc (Ville)
- add an extra variable for clarity (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200123124801.14958-1-jani.nikula@intel.com

drm/panel: Fix boe,tv101wum-n53 htotal timing

The datasheet suggests 60 for tHFP, so let's adjust the number
accordingly.

This also makes the framerate be 60Hz as intended:
159916.0 * 1000 / ((1200 + 80 + 24 + 60)*(1920 + 20 + 4 + 10))
=> 60.00 Hz

Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Fixes: e6d020eeefcd ("drm/panel: support for boe, tv101wum-n53 wuxga dsi video mode panel")
Cc: Jitao Shi <jitao.shi@mediatek.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> [added fixes tag]
Link: https://patchwork.freedesktop.org/patch/msgid/20200125050256.107404-1-drinkcat@chromium.org

drm: Avoid drm_global_mutex for simple inc/dec of dev->open_count

Since drm_global_mutex is a true global mutex across devices, we don't
want to acquire it unless absolutely necessary. For maintaining the
device local open_count, we can use atomic operations on the counter
itself, except when making the transition to/from 0. Here, we tackle the
easy portion of delaying acquiring the drm_global_mutex for the final
release by using atomic_dec_and_mutex_lock(), leaving the global
serialisation across the device opens.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Thomas Hellström (VMware) <thomas_os@shipmail.org>
Reviewed-by: Thomas Hellström <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200124130107.125404-1-chris@chris-wilson.co.uk

drm: Release filp before global lock

The file is not part of the global drm resource and can be released
prior to take the global mutex to drop the open_count (and potentially
close) the drm device. As the global mutex is indeed global, not only
within the device but across devices, a slow file release mechanism can
bottleneck the entire system.

However, inside drm_close_helper() there are a number of dev->driver
callbacks that take the drm_device as the first parameter... Worryingly
some of those callbacks may be (implicitly) depending on the global
mutex.

v2: Drop the debug message for the open-count, it's included with the
drm_file_free() debug message -- and for good measure make that up as
reading outside of the mutex.

v3: Separate the calling of the filp cleanup outside of
drm_global_mutex into a new drm_release_noglobal() hook, so that we can
phase the transition. drm/savage relies on the global mutex, and there
may be more, so be cautious.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Thomas Hellström (VMware) <thomas_os@shipmail.org>
Reviewed-by: Thomas Hellström (VMware) <thomas_os@shipmail.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200124125627.125042-1-chris@chris-wilson.co.uk

dt-bindings: restrict properties for sitronix,st7735r

David Lechner noticed (paraphrased):
- not all properties from panel-common are applicable.
- missing optional rotation and backlight properties

Fix this by listing all allowed properties,
and do not allow other properties.

Fixes: abdd9e3705c8 ("dt-bindings: display: sitronix,st7735r: Convert to DT schema")
Reported-by: David Lechner <david@lechnology.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Cc: David Lechner <david@lechnology.com>
Cc: dri-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200120190249.GA9619@ravnborg.org

drm/panel: simple: add display timings for logic technologies displays

Add display timings for the following 3 display panels manufactured by
Logic Technologies Limited:

- LT161010-2NHC e.g. as found in the Toradex Capacitive Touch Display
  7" Parallel [1]
- LT161010-2NHR e.g. as found in the Toradex Resistive Touch Display 7"
  Parallel [2]
- LT170410-2WHC e.g. as found in the Toradex Capacitive Touch Display
  10.1" LVDS [3]

Those panels may also be distributed by Endrich Bauelemente Vertriebs
GmbH [4].

[1] https://docs.toradex.com/104497-7-inch-parallel-capacitive-touch-display-800x480-datasheet.pdf
[2] https://docs.toradex.com/104498-7-inch-parallel-resistive-touch-display-800x480.pdf
[3] https://docs.toradex.com/105952-10-1-inch-lvds-capacitive-touch-display-1280x800-datasheet.pdf
[4] https://www.endrich.com/isi50_isi30_tft-displays/lt170410-1whc_isi30

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Philippe Schenker <philippe.schenker@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120080100.170294-3-marcel@ziswiler.com

dt-bindings: panel-simple: add bindings for logic technologies displays

Add bindings for the following 3 to be added display panels manufactured
by Logic Technologies Limited:

- LT161010-2NHC e.g. as found in the Toradex Capacitive Touch Display
7" Parallel [1]
- LT161010-2NHR e.g. as found in the Toradex Resistive Touch Display 7"
Parallel [2]
- LT170410-2WHC e.g. as found in the Toradex Capacitive Touch Display
10.1" LVDS [3]

Those panels may also be distributed by Endrich Bauelemente Vertriebs
GmbH [4].

[1] https://docs.toradex.com/104497-7-inch-parallel-capacitive-touch-display-800x480-datasheet.pdf
[2] https://docs.toradex.com/104498-7-inch-parallel-resistive-touch-display-800x480.pdf
[3] https://docs.toradex.com/105952-10-1-inch-lvds-capacitive-touch-display-1280x800-datasheet.pdf
[4] https://www.endrich.com/isi50_isi30_tft-displays/lt170410-1whc_isi30

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120080100.170294-2-marcel@ziswiler.com

dt-bindings: add vendor prefix for logic technologies limited

Add vendor prefix for Logic Technologies Limited [1] which is a Chinese
display manufacturer e.g. distributed by German Endrich Bauelemente
Vertriebs GmbH [2].

[1] https://logictechno.com/contact-us/
[2] https://www.endrich.com/isi50_isi30_tft-displays/lt170410-1whc_isi30

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120080100.170294-1-marcel@ziswiler.com

dt-bindings: display: Convert a bunch of panels to DT schema

Convert all the 'simple' panels which match the constraints of the
common panel-simple.yaml schema. This conversion is based on how the
panels are documented. Some may turn out to be more complex once the
schema is applied to actual dts files.

Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200119210907.24152-1-robh@kernel.org

Merge tag 'topic/drm-warn-2020-01-22' of git://anongit.freedesktop.org/drm/drm-intel into drm-misc-next

struct drm_device based drm_WARN* macros

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87eevrecnf.fsf@intel.com

drm/dp_mst: Mention max_payloads in proposed_vcpis/payloads docs

Mention that the size of these two structs is determined by
max_payloads. Suggested by Ville Syrjälä.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200122194321.14953-2-lyude@redhat.com

drm/dp_mst: Fix clearing payload state on topology disable

The issues caused by:

commit 64e62bdf04ab ("drm/dp_mst: Remove VCPI while disabling topology
mgr")

Prompted me to take a closer look at how we clear the payload state in
general when disabling the topology, and it turns out there's actually
two subtle issues here.

The first is that we're not grabbing &mgr.payload_lock when clearing the
payloads in drm_dp_mst_topology_mgr_set_mst(). Seeing as the canonical
lock order is &mgr.payload_lock -> &mgr.lock (because we always want
&mgr.lock to be the inner-most lock so topology validation always
works), this makes perfect sense. It also means that -technically- there
could be racing between someone calling
drm_dp_mst_topology_mgr_set_mst() to disable the topology, along with a
modeset occurring that's modifying the payload state at the same time.

The second is the more obvious issue that Wayne Lin discovered, that
we're not clearing proposed_payloads when disabling the topology.

I actually can't see any obvious places where the racing caused by the
first issue would break something, and it could be that some of our
higher-level locks already prevent this by happenstance, but better safe
then sorry. So, let's make it so that drm_dp_mst_topology_mgr_set_mst()
first grabs &mgr.payload_lock followed by &mgr.lock so that we never
race when modifying the payload state. Then, we also clear
proposed_payloads to fix the original issue of enabling a new topology
with a dirty payload state. This doesn't clear any of the drm_dp_vcpi
structures, but those are getting destroyed along with the ports anyway.

Changes since v1:
* Use sizeof(mgr->payloads[0])/sizeof(mgr->proposed_vcpis[0]) instead -
  vsyrjala

Cc: Sean Paul <sean@poorly.run>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200122194321.14953-1-lyude@redhat.com

drm/dp_mst: Fix indenting in drm_dp_mst_topology_mgr_set_mst()

This has always bugged me but somehow I've never remembered to actually
fix it. So let's do that.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200117224749.128994-1-lyude@redhat.com

drm/bridge: Add I2C based driver for ps8640 bridge

This patch adds drm_bridge driver for parade DSI to eDP bridge chip.

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
[uli: followed API changes, removed FW update feature]
Signed-off-by: Ulrich Hecht <uli@fpond.eu>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191230090419.137141-3-enric.balletbo@collabora.com

Documentation: bridge: Add documentation for ps8640 DT properties

Add documentation for DT properties supported by
ps8640 DSI-eDP converter.

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Ulrich Hecht <uli@fpond.eu>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191230090419.137141-2-enric.balletbo@collabora.com

drm/print: introduce new struct drm_device based WARN* macros

Add new struct drm_device based WARN* macros. These are modeled after
the core kernel device based WARN* macros. These would be preferred
over the regular WARN* macros, where possible.

These macros include device information in the backtrace, so we know
what device the warnings originate from.

Knowing the device specific information in the backtrace would be
helpful in development all around.

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115034455.17658-2-pankaj.laxminarayan.bharadiya@intel.com

drm/ttm: flush the fence on the bo after we individualize the reservation object

As we move the ttm_bo_individualize_resv() upwards, we need flush the
copied fence too. Otherwise the driver keeps waiting for fence.

run&Kill kfdtest, then perf top.

  25.53%  [ttm]                     [k] ttm_bo_delayed_delete
  24.29%  [kernel]                  [k] dma_resv_test_signaled_rcu
  19.72%  [kernel]                  [k] ww_mutex_lock

Fix: 378e2d5b("drm/ttm: fix ttm_bo_cleanup_refs_or_queue once more")
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/series/72339/
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/drm_dp_mst:remove set but not used variable 'origlen'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/drm_dp_mst_topology.c:3693:16: warning: variable
‘origlen’ set but not used [-Wunused-but-set-variable]
  int replylen, origlen, curreply;

It looks like never use variable origlen after assign value to it.

Fixes: ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)")
Signed-off-by: Bo YU <tsu.yubo@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200118080628.mxcx7bfwdas5m7un@kaowomen.cn

drm/panfrost: Prefix interrupt handlers' names

Currently, the interrupt lines requested by Panfrost
use unmeaningful names, which adds some obscurity
to interrupt introspection (i.e. any tool based
on procfs' interrupts file).

In order to improve this, prefix each requested
interrupt with the module name: panfrost-{gpu,job,mmu}.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191214045952.9452-1-ezequiel@collabora.com

drm/panfrost: Remove core stack power management

Explicit management of the GPU's core stacks is only necessary in the
case of a broken integration with the PDC. Since there are no known
platforms which have such a broken integration let's remove the explicit
control from the driver since this apparently causes problems on other
platforms and will have a small performance penality.

The out of tree mali_kbase driver contains this text regarding
controlling the core stack (CONFIGMALI_CORESTACK):

  Enabling this feature on supported GPUs will let the driver powering
  on/off the GPU core stack independently without involving the Power
  Domain Controller. This should only be enabled on platforms which
  integration of the PDC to the Mali GPU is known to be problematic.
  This feature is currently only supported on t-Six and t-HEx GPUs.

  If unsure, say N.

Signed-off-by: Steven Price <steven.price@arm.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Reviewed-by: Nicolas Boichat <drinkcat@chromium.org>
Tested-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109133104.11661-1-steven.price@arm.com

drm/syncobj: Add documentation for timeline syncobj

We've added a set of new APIs to manipulate syncobjs holding timelines
of dma_fence. This adds a bit of documentation about how this works.

v2: Small language nits (Lionel)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/348578/
Cc: Christian Koenig <Christian.Koenig@amd.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: David(ChunMing) Zhou <David1.Zhou@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

drm: tiny: st7735r: Add support for Okaya RH128128T

Add support for the Okaya RH128128T display to the st7735r driver on
DT-enabled systems.

The RH128128T is a 128x128 1.44" TFT display driven by a Sitronix
ST7715R TFT Controller/Driver.  The latter is very similar to the
ST7735R, and can be handled by the existing st7735r driver.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115124548.3951-6-geert+renesas@glider.be

drm: tiny: st7735r: Prepare for adding support for more displays

Currently the st7735r driver supports only a single display panel.
Prepare for adding support for other display panels by factoring out the
display-specific parameters in struct st7735r_cfg.

For now, the following parameters can be configured:
  - Display resolution,
  - Horizontal/vertical display offsets,
  - Read-write versus read-only controllers,
  - RGB versus BGR color component ordering.

Rename jd_t18003_t01_pipe_enable() and jd_t18003_t01_pipe_funcs() to
st7735r_pipe_enable() resp. st7735r_pipe_funcs(), as they are not really
specific to the Jianda JD-T18003-T01 display anymore.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115124548.3951-5-geert+renesas@glider.be

drm/mipi_dbi: Add support for display offsets

If the resolution of the TFT display is smaller than the maximum
resolution supported by the display controller, the display may be
connected to the driver output arrays with a horizontal and/or vertical
offset, leading to a shifted image.

Add support for specifying these offsets.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115124548.3951-4-geert+renesas@glider.be

dt-bindings: display: sitronix,st7735r: Add Okaya RH128128T

Document support for the Okaya RH128128T display, which is a 128x128
1.44" TFT display driven by a Sitronix ST7715R TFT Controller/Driver.
It can be found on e.g. the Renesas YRSK-LCD-PMOD extension board, which
comes with various Renesas development kits (e.g. Renesas Starter Kit+
for RZ/A1H[1]).

ST7715R and ST7735R are very similar.  Their major difference is that
the former is restricted to displays of up to 132x132 pixels, while the
latter supports displays up to 132x162 pixels.

[1] https://renesasrulz.com/the_vault/f/archive-forum/4981/upgrading-to-the-renesas-rz-a1h

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115124548.3951-3-geert+renesas@glider.be

dt-bindings: display: sitronix,st7735r: Convert to DT schema

Convert the DT binding documentation for Sitronix ST7735R displays to DT
schema.

Add a reference to the Adafruit 1.8" LCD while at it.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115124548.3951-2-geert+renesas@glider.be

drm: fix parameters documentation style in drm_dma

Remove old documentation style and use new one to avoid warnings when
compiling with W=1

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200114160135.14990-1-benjamin.gaignard@st.com

drm/mst: Some style improvements in drm_dp_mst_topology_mgr_set_mst()

Removing this lose code block and removing unnecessary bracket.

Cc: Lyude Paul <lyude@redhat.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200117015837.402239-2-jose.souza@intel.com

Revert "drm/dp_mst: Remove VCPI while disabling topology mgr"

This reverts commit 64e62bdf04ab8529f45ed0a85122c703035dec3a.

This commit ends up causing some lockdep splats due to trying to grab the
payload lock while holding the mgr's lock:

[   54.010099]
[   54.011765] ======================================================
[   54.018670] WARNING: possible circular locking dependency detected
[   54.025577] 5.5.0-rc6-02274-g77381c23ee63 #47 Not tainted
[   54.031610] ------------------------------------------------------
[   54.038516] kworker/1:6/1040 is trying to acquire lock:
[   54.044354] ffff888272af3228 (&mgr->payload_lock){+.+.}, at:
drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4
[   54.054957]
[   54.054957] but task is already holding lock:
[   54.061473] ffff888272af3060 (&mgr->lock){+.+.}, at:
drm_dp_mst_topology_mgr_set_mst+0x3c/0x2e4
[   54.071193]
[   54.071193] which lock already depends on the new lock.
[   54.071193]
[   54.080334]
[   54.080334] the existing dependency chain (in reverse order) is:
[   54.088697]
[   54.088697] -> #1 (&mgr->lock){+.+.}:
[   54.094440]        __mutex_lock+0xc3/0x498
[   54.099015]        drm_dp_mst_topology_get_port_validated+0x25/0x80
[   54.106018]        drm_dp_update_payload_part1+0xa2/0x2e2
[   54.112051]        intel_mst_pre_enable_dp+0x144/0x18f
[   54.117791]        intel_encoders_pre_enable+0x63/0x70
[   54.123532]        hsw_crtc_enable+0xa1/0x722
[   54.128396]        intel_update_crtc+0x50/0x194
[   54.133455]        skl_commit_modeset_enables+0x40c/0x540
[   54.139485]        intel_atomic_commit_tail+0x5f7/0x130d
[   54.145418]        intel_atomic_commit+0x2c8/0x2d8
[   54.150770]        drm_atomic_helper_set_config+0x5a/0x70
[   54.156801]        drm_mode_setcrtc+0x2ab/0x833
[   54.161862]        drm_ioctl+0x2e5/0x424
[   54.166242]        vfs_ioctl+0x21/0x2f
[   54.170426]        do_vfs_ioctl+0x5fb/0x61e
[   54.175096]        ksys_ioctl+0x55/0x75
[   54.179377]        __x64_sys_ioctl+0x1a/0x1e
[   54.184146]        do_syscall_64+0x5c/0x6d
[   54.188721]        entry_SYSCALL_64_after_hwframe+0x49/0xbe
[   54.194946]
[   54.194946] -> #0 (&mgr->payload_lock){+.+.}:
[   54.201463]
[   54.201463] other info that might help us debug this:
[   54.201463]
[   54.210410]  Possible unsafe locking scenario:
[   54.210410]
[   54.217025]        CPU0                    CPU1
[   54.222082]        ----                    ----
[   54.227138]   lock(&mgr->lock);
[   54.230643]                                lock(&mgr->payload_lock);
[   54.237742]                                lock(&mgr->lock);
[   54.244062]   lock(&mgr->payload_lock);
[   54.248346]
[   54.248346]  *** DEADLOCK ***
[   54.248346]
[   54.254959] 7 locks held by kworker/1:6/1040:
[   54.259822]  #0: ffff888275c4f528 ((wq_completion)events){+.+.},
at: worker_thread+0x455/0x6e2
[   54.269451]  #1: ffffc9000119beb0
((work_completion)(&(&dev_priv->hotplug.hotplug_work)->work)){+.+.},
at: worker_thread+0x455/0x6e2
[   54.282768]  #2: ffff888272a403f0 (&dev->mode_config.mutex){+.+.},
at: i915_hotplug_work_func+0x4b/0x2be
[   54.293368]  #3: ffffffff824fc6c0 (drm_connector_list_iter){.+.+},
at: i915_hotplug_work_func+0x17e/0x2be
[   54.304061]  #4: ffffc9000119bc58 (crtc_ww_class_acquire){+.+.},
at: drm_helper_probe_detect_ctx+0x40/0xfd
[   54.314855]  #5: ffff888272a40470 (crtc_ww_class_mutex){+.+.}, at:
drm_modeset_lock+0x74/0xe2
[   54.324385]  #6: ffff888272af3060 (&mgr->lock){+.+.}, at:
drm_dp_mst_topology_mgr_set_mst+0x3c/0x2e4
[   54.334597]
[   54.334597] stack backtrace:
[   54.339464] CPU: 1 PID: 1040 Comm: kworker/1:6 Not tainted
5.5.0-rc6-02274-g77381c23ee63 #47
[   54.348893] Hardware name: Google Fizz/Fizz, BIOS
Google_Fizz.10139.39.0 01/04/2018
[   54.357451] Workqueue: events i915_hotplug_work_func
[   54.362995] Call Trace:
[   54.365724]  dump_stack+0x71/0x9c
[   54.369427]  check_noncircular+0x91/0xbc
[   54.373809]  ? __lock_acquire+0xc9e/0xf66
[   54.378286]  ? __lock_acquire+0xc9e/0xf66
[   54.382763]  ? lock_acquire+0x175/0x1ac
[   54.387048]  ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4
[   54.393177]  ? __mutex_lock+0xc3/0x498
[   54.397362]  ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4
[   54.403492]  ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4
[   54.409620]  ? drm_dp_dpcd_access+0xd9/0x101
[   54.414390]  ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4
[   54.420517]  ? drm_dp_mst_topology_mgr_set_mst+0x218/0x2e4
[   54.426645]  ? intel_digital_port_connected+0x34d/0x35c
[   54.432482]  ? intel_dp_detect+0x227/0x44e
[   54.437056]  ? ww_mutex_lock+0x49/0x9a
[   54.441242]  ? drm_helper_probe_detect_ctx+0x75/0xfd
[   54.446789]  ? intel_encoder_hotplug+0x4b/0x97
[   54.451752]  ? intel_ddi_hotplug+0x61/0x2e0
[   54.456423]  ? mark_held_locks+0x53/0x68
[   54.460803]  ? _raw_spin_unlock_irqrestore+0x3a/0x51
[   54.466347]  ? lockdep_hardirqs_on+0x187/0x1a4
[   54.471310]  ? drm_connector_list_iter_next+0x89/0x9a
[   54.476953]  ? i915_hotplug_work_func+0x206/0x2be
[   54.482208]  ? worker_thread+0x4d5/0x6e2
[   54.486587]  ? worker_thread+0x455/0x6e2
[   54.490966]  ? queue_work_on+0x64/0x64
[   54.495151]  ? kthread+0x1e9/0x1f1
[   54.498946]  ? queue_work_on+0x64/0x64
[   54.503130]  ? kthread_unpark+0x5e/0x5e
[   54.507413]  ? ret_from_fork+0x3a/0x50

The proper fix for this is probably cleanup the VCPI allocations when we're
enabling the topology, or on the first payload allocation. For now though,
let's just revert.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 64e62bdf04ab ("drm/dp_mst: Remove VCPI while disabling topology mgr")
Cc: Sean Paul <sean@poorly.run>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20200117205149.97262-1-lyude@redhat.com

drm/panel: Add Feixin K101 IM2BA02 panel

Feixin K101 IM2BA02 is a 800x1280 4-lane MIPI-DSI LCD panel.

Add a panel driver for it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116033636.512461-4-icenowy@aosc.io

dt-bindings: panel: add Feixin K101 IM2BA02 MIPI-DSI panel

Feixin K101 IM2BA02 is a 10.1" 800x1280 4-lane MIPI-DSI panel.

Add device tree binding for it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116033636.512461-3-icenowy@aosc.io

dt-bindings: vendor-prefix: add Shenzhen Feixin Photoelectics Co., Ltd

Shenzhen Feixin Photoelectics Co., Ltd is a company to provide LCD
modules.

Add its vendor prefix.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116033636.512461-2-icenowy@aosc.io

drm/panel: support for auo, b101uan08.3 wuxga dsi video mode panel

Auo,auo,b101uan08.3's connector is same as boe,tv101wum-nl6.
The most codes can be reuse.
So auo,b101uan08.3 and boe,tv101wum-nl6 use one driver file.
Add the different parts in driver data.

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-6-jitao.shi@mediatek.com

drm/panel: support for boe, tv101wum-n53 wuxga dsi video mode panel

Boe,tv101wum-n53's connector is same as boe,tv101wum-nl6.
The most codes can be reuse.
So boe,tv101wum-n53 and boe,tv101wum-nl6 use one driver file.
Add the different parts in driver data.

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-5-jitao.shi@mediatek.com

drm/panel: support for auo, kd101n80-45na wuxga dsi video mode panel

Auo,kd101n80-45na's connector is same as boe,tv101wum-nl6.
The most codes can be reuse.
So auo,kd101n80-45na and boe,tv101wum-nl6 use one driver file.
Add the different parts in driver data.

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-4-jitao.shi@mediatek.com

drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel

Add driver for BOE tv101wum-nl6 panel is a 10.1" 1200x1920 panel.

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-3-jitao.shi@mediatek.com

dt-bindings: display: panel: Add boe tv101wum-n16 panel bindings

Add documentation for "boe,tv101wum-n16", "auo,kd101n80-45na",
"boe,tv101wum-n53" and "auo,b101uan08.3" panels.

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
[dropped Rob from list of maintainers - verified on irc]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-2-jitao.shi@mediatek.com

drm/ttm: nuke invalidate_caches callback

Another completely unused feature.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/348265/

video: fbdev: nvidia: clean up indentation issues and comment block

There is a hunk of code that is incorrectly indented, clean up the
indentation and a comment block. Also remove block braces around a
one line statement on an if condition and add missing spaces after
if keywords.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200113144627.219967-1-colin.king@canonical.com

fbdev: remove object duplication in Makefile

The objects in $(fb-objs) $(fb-y) $(fb-m) are linked to fb.ko .

This line adds $(fb-y) to fb-objs, so the objects from $(fb-y) are
listed twice as the dependency of the module.

It works because Kbuild trims the duplicated objects from linking,
but there is no good reason to have this line.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106081352.27730-1-masahiroy@kernel.org

video: exynos: Rename Exynos to lowercase

Fix up inconsistent usage of upper and lowercase letters in "Exynos"
name.

"EXYNOS" is not an abbreviation but a regular trademarked name.
Therefore it should be written with lowercase letters starting with
capital letter.

The lowercase "Exynos" name is promoted by its manufacturer Samsung
Electronics Co., Ltd., in advertisement materials and on website.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200104152107.11407-16-krzk@kernel.org

fbdev: cg14fb: use resource_size

Use resource_size rather than a verbose computation on
the end and start fields.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

<smpl>
@@ struct resource ptr; @@
- (ptr.end - ptr.start + 1)
+ resource_size(&ptr)
</smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
[b.zolnierkie: minor patch summary fixup]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1577900990-8588-8-git-send-email-Julia.Lawall@inria.fr

fbdev: s1d13xxxfb: use resource_size

Use resource_size rather than a verbose computation on
the end and start fields.

The semantic patch that makes these changes is as follows:
(http://coccinelle.lip6.fr/)

<smpl>
@@ struct resource ptr; @@
- (ptr.end - ptr.start + 1)
+ resource_size(&ptr)
</smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Cc: Kristoffer Ericson <kristoffer.ericson@gmail.com>
[b.zolnierkie: ported patch to drm-misc-next]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1577900990-8588-4-git-send-email-Julia.Lawall@inria.fr

video: sa1100fb: constify copied structure

The monspecs structure is only copied into another structure,
so make it const.

The opportunity for this change was found using Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1577864614-5543-8-git-send-email-Julia.Lawall@inria.fr

fbmem: Adjust indentation in fb_prepare_logo and fb_blank

Clang warns:

../drivers/video/fbdev/core/fbmem.c:665:3: warning: misleading
indentation; statement is not part of the previous 'else'
[-Wmisleading-indentation]
        if (fb_logo.depth > 4 && depth > 4) {
        ^
../drivers/video/fbdev/core/fbmem.c:661:2: note: previous statement is
here
        else
        ^
../drivers/video/fbdev/core/fbmem.c:1075:3: warning: misleading
indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
        return ret;
        ^
../drivers/video/fbdev/core/fbmem.c:1072:2: note: previous statement is
here
        if (!ret)
        ^
2 warnings generated.

This warning occurs because there are spaces before the tabs on these
lines. Normalize the indentation in these functions so that it is
consistent with the Linux kernel coding style and clang no longer warns.

Fixes: 1692b37c99d5 ("fbdev: Fix logo if logo depth is less than framebuffer depth")
Link: https://github.com/ClangBuiltLinux/linux/issues/825
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191218030025.10064-1-natechancellor@gmail.com

fbcon: Adjust indentation in set_con2fb_map

Clang warns:

../drivers/video/fbdev/core/fbcon.c:915:3: warning: misleading
indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
        return err;
        ^
../drivers/video/fbdev/core/fbcon.c:912:2: note: previous statement is
here
        if (!search_fb_in_map(info_idx))
        ^
1 warning generated.

This warning occurs because there is a space before the tab on this
line. This happens on several lines in this function; normalize them
so that the indentation is consistent with the Linux kernel coding
style and clang no longer warns.

This warning was introduced before the beginning of git history so no
fixes tab.

Link: https://github.com/ClangBuiltLinux/linux/issues/824
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191218025337.35044-1-natechancellor@gmail.com

pxa168fb: fix release function mismatch in probe failure

The driver uses kfree() to release the resource allocated by
framebuffer_alloc(), which does not match.
Use framebuffer_release() instead to fix it.

Fixes: 638772c7553f ("fb: add support of LCD display controller on pxa168/910 (base layer)")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205160613.32075-1-hslester96@gmail.com

OMAP: DSS2: remove non-zero check on variable r

Variable r is being initialized to zero, so the check of a non-zero
rv is redundant and can be removed.

It appears that the previous case statements set r to be -EINVAL
and the "Fallthrough" comment afterwards suggested it was going
to fall through to this non-zero check but won't because of the
break statement. Remove the confusion by removing the Fallthrough
comment too.

Addresses-Coverity: ("Logically dead code")
Fixes: b39a982ddecf ("OMAP: DSS2: omapfb driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191204152847.1435188-1-colin.king@canonical.com

video: Fix Kconfig indentation

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^        /\t/' -i */Kconfig

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Jiri Kosina <trivial@kernel.org>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jingoo Han <jingoohan1@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191120133838.13132-1-krzk@kernel.org

video: ssd1307fb: add the missed regulator_disable

The driver forgets to disable the regulator in remove like what is done
in probe failure.
Add the missed call to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Tested-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191118114150.25724-1-hslester96@gmail.com

video: hyperv_fb: fix indentation issue

There is a block of statements that are indented
too deeply, remove the extraneous tabs.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: "K . Y . Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sasha Levin <sashal@kernel.org>
[b.zolnierkie: minor patch summary fixup]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114172720.322023-1-colin.king@canonical.com

fbdev: potential information leak in do_fb_ioctl()

The "fix" struct has a 2 byte hole after ->ywrapstep and the
"fix = info->fix;" assignment doesn't necessarily clear it.  It depends
on the compiler.  The solution is just to replace the assignment with an
memcpy().

Fixes: 1f5e31d7e55a ("fbmem: don't call copy_from/to_user() with mutex held")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andrea Righi <righi.andrea@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Peter Rosin <peda@axentia.se>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200113100132.ixpaymordi24n3av@kili.mountain

drm: Add getfb2 ioctl

getfb2 allows us to pass multiple planes and modifiers, just like addfb2
over addfb.

Changes since v2:
 - add privilege checks from getfb1 since handles should only be
   returned to master/root

Changes since v1:
 - unused modifiers set to 0 instead of DRM_FORMAT_MOD_INVALID
 - update ioctl number

Signed-off-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Juston Li <juston.li@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191217034642.3814-1-juston.li@intel.com

drm/panel: simple: Add support for the Frida FRD350H54004 panel

The FRD350H54004 is a simple 3.5" 320x240 24-bit TFT panel, found for
instance inside the Anbernic RG-350 handheld gaming console.

v2: Order alphabetically
v3: Add connector_type, and update timings according to the constraints
    listed in the datasheet

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200113161741.32061-3-paul@crapouillou.net

dt-bindings: panel-simple: Add compatible for Frida FRD350H54004 LCD

Add bindings documentation for the Frida 3.5" (320x240 pixels) 24-bit
TFT LCD panel.

v2: Switch documentation from plain text to YAML
v3: Simply add new compatible to panel-simple.yaml file instead of
    adding new file

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200113161741.32061-2-paul@crapouillou.net

dt-bindings: vendor-prefixes: Add Shenzhen Frida LCD Co., Ltd.

Add an entry for Shenzhen Frida LCD Co., Ltd.

v2: No change
v3: No change

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200113161741.32061-1-paul@crapouillou.net

drm/rockchip: Add missing vmalloc header

The Rockship DRM GEM code uses vmap()/vunmap() so vmalloc header must be
included to avoid warnings like (on IA64, compile tested):

    drivers/gpu/drm/rockchip/rockchip_drm_gem.c: In function ‘rockchip_gem_alloc_iommu’:
    drivers/gpu/drm/rockchip/rockchip_drm_gem.c:134:20: error:
        implicit declaration of function ‘vmap’ [-Werror=implicit-function-declaration]

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1577779956-7612-1-git-send-email-krzk@kernel.org

drm/rockchip: use DIV_ROUND_UP macro for calculations.

Replace the open coded calculation with the more concise and readable
DIV_ROUND_UP macro.

Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109142057.10744-1-wambui.karugax@gmail.com

drm/drm_panel: fix export of drm_panel_of_backlight, try #3

Making this IS_REACHABLE() was still wrong, as that just determines
whether the lower-level backlight code would be reachable from the panel
driver. However, with CONFIG_DRM=y and CONFIG_BACKLIGHT_CLASS_DEVICE=m,
the drm_panel_of_backlight is left out of drm_panel.o but the condition
tells the driver that it is there, leading to multiple link errors such as

ERROR: "drm_panel_of_backlight" [drivers/gpu/drm/panel/panel-sitronix-st7701.ko] undefined!
ERROR: "drm_panel_of_backlight" [drivers/gpu/drm/panel/panel-sharp-ls043t1le01.ko] undefined!
ERROR: "drm_panel_of_backlight" [drivers/gpu/drm/panel/panel-seiko-43wvf1g.ko] undefined!
ERROR: "drm_panel_of_backlight" [drivers/gpu/drm/panel/panel-ronbo-rb070d30.ko] undefined!
ERROR: "drm_panel_of_backlight" [drivers/gpu/drm/panel/panel-rocktech-jh057n00900.ko] undefined!
ERROR: "drm_panel_of_backlight" [drivers/gpu/drm/panel/panel-panasonic-vvx10f034n00.ko] undefined!
ERROR: "drm_panel_of_backlight" [drivers/gpu/drm/panel/panel-osd-osd101t2587-53ts.ko] undefined!

Change the condition to check for whether the function was actually part
of the drm module. This version of the patch survived a few hundred
randconfig builds, so I have a good feeling this might be the last
one for the export.

Fixes: 4a34a9dcec94 ("drm/drm_panel: Fix EXPORT of drm_panel_of_backlight() one more time")
Fixes: 907aa265fde6 ("drm/drm_panel: fix EXPORT of drm_panel_of_backlight")
Fixes: 152dbdeab1b2 ("drm/panel: add backlight support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107203231.920256-1-arnd@arndb.de

drm: panel: fix excessive stack usage in td028ttec1_prepare

With gcc -O3 in combination with the structleak plug, the compiler can
inline very aggressively, leading to rather large stack usage:

drivers/gpu/drm/panel/panel-tpo-td028ttec1.c: In function 'td028ttec1_prepare':
drivers/gpu/drm/panel/panel-tpo-td028ttec1.c:233:1: error: the frame size of 2768 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
 }

Marking jbt_reg_write_*() as noinline avoids the case where
multiple instances of this function get inlined into the same
stack frame and each one adds a copy of 'tx_buf'.

The compiler is clearly making some bad decisions here, but I
did not open a new bug report as this only happens in combination
with the structleak plugin.

This fixes mmtom ("init/Kconfig: enable -O3 for all arches")

Link: https://lore.kernel.org/lkml/CAK8P3a3jAnFZA3GFRtdYdg1-i-oih3pOQzkkrK-X3BGsFrMiZQ@mail.gmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> [fix indent]
Link: https://patchwork.freedesktop.org/patch/msgid/20200108135116.3687988-1-arnd@arndb.de

drm/connector: Hookup the new drm_cmdline_mode panel_orientation member (v2)

If the new video=... panel_orientation option is set for a connector, honor
it and setup a matching "panel orientation" property on the connector.

Changes in v2:
-Improve DRM_INFO message to make it clear that the panel_orientation is
 being forced from the commandline

BugLink: https://gitlab.freedesktop.org/plymouth/plymouth/merge_requests/83
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200105155120.96466-2-hdegoede@redhat.com

drm/connector: Split out orientation quirk detection (v2)

Not every platform needs quirk detection for panel orientation, so
split the drm_connector_init_panel_orientation_property into two
functions. One for platforms without the need for quirks, and the
other for platforms that need quirks.

Hans de Goede (changes in v2):

Rename the function from drm_connector_init_panel_orientation_property
to drm_connector_set_panel_orientation[_with_quirk] and pass in the
panel-orientation to set.

Beside the rename, also make the function set the passed in value
only once, if the value was set before (to a value other then
DRM_MODE_PANEL_ORIENTATION_UNKNOWN) make any further set calls a no-op.

This change is preparation for allowing the user to override the
panel-orientation for any connector from the kernel commandline.
When the panel-orientation is overridden this way, then we must ignore
the panel-orientation detection done by the driver.

Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200105155120.96466-1-hdegoede@redhat.com

drm: always determine branch device with drm_dp_is_branch()

The helper should always be used.

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Oleg Vasilev <oleg.vasilev@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829114854.1539-2-oleg.vasilev@intel.com

drm: move DP_MAX_DOWNSTREAM_PORTS from i915 to drm core

DP_MAX_DOWNSTREAM_PORTS=0x10 is a vendor-independent constant.

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Oleg Vasilev <oleg.vasilev@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829114854.1539-1-oleg.vasilev@intel.com

drm/panel: simple: Add Satoz SAT050AT40H12R2 panel support

Add support for the Satoz SAT050AT40H12R2 panel.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109184037.9091-2-miquel.raynal@bootlin.com

dt-bindings: display: simple: Add Satoz panel

Satoz is a Chinese TFT manufacturer.
Website: http://www.sat-sz.com/English/index.html

Add the compatible for its SAT050AT40H12R2 5.0 inch LCD panel.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109184037.9091-1-miquel.raynal@bootlin.com

dt-bindings: display: Convert Allwinner display pipeline to schemas

The Allwinner SoCs have a display engine composed of several controllers
assembled differently depending on the SoC, the number and type of output
they have, and the additional features they provide. A number of those are
supported in Linux, with the matching bindings.

Now that we have the DT validation in place, let's split into separate file
and convert the device tree bindings for those controllers to schemas.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200103152801.47254-1-maxime@cerno.tech

drm/fb-cma-helpers: Fix include issue

Exported functions prototypes are missing in drm_fb_cma_helper.c
Include drm_fb_cma_helper to fix that issue.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20191119105753.32363-1-benjamin.gaignard@st.com

drm/modes: tag unused variables to avoid warnings

Some variables are set but never used. To avoid warning when compiling
with W=1 and keep the algorithm like it is tag theses variables
with _maybe_unused macro.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210102437.19377-1-benjamin.gaignard@st.com

drm/panel: Add support for BOE NV140FHM-N49 panel to panel-simple

This patch adds support for the BOE NV140FHM-N49 panel to the panel-simple
driver. The panel is used by the pine64 Pinebook Pro.

Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109112952.2620-2-t.schramm@manjaro.org

dt-bindings: display: add BOE 14" panel

Add bindings for the BOE NV140FHM-N49 14" 1920x1080 panel.

The panel is used by the pine64 Pinebook Pro.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Tobias Schramm <t.schramm@manjaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109140742.GA12940@ravnborg.org

drm/panel: Add driver for Sony ACX424AKP panel

The Sony ACX424AKP is a command/videomode DSI panel for
mobile devices. It is used on the ST-Ericsson HREF520
reference design. We support video mode by default, but
it is possible to switch the panel into command mode
by using the bool property "dsi-command-mode".

Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109072815.334867-1-linus.walleij@linaro.org

drm/udl: Make udl driver depend on CONFIG_USB

The udl driver for DisplayLink devices depends on support for host-side
USB controllers, which is enabled with CONFIG_USB. Plain USB support as
given by CONFIG_USB_SUPPORT is not sufficient.

This patch changes dependencies for udl to depend on CONFIG_USB, instead
of CONFIG_USB_SUPPORT. Users will have to enable CONFIG_USB and select a
USB host controller. With this change udl dependencies work the same way
as dependencies for PCI drivers.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106141016.9562-1-tzimmermann@suse.de

drm/Kconfig: add missing 'depends on DRM' for DRM_DP_CEC

Add a missing 'depends on DRM' for the DRM_DP_CEC config
option. Without that enabling DRM_DP_CEC will force CEC_CORE
to =y instead of =m if DRM=m as well.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/489bdaae-9b05-2d70-12e1-4fda7899dfc1@xs4all.nl

dt-bindings: panel-simple: Add compatible for Sharp LS020B1DD01D

Add a compatible string for the Sharp LS020B1DD01D 2" HQVGA TFT LCD
panel, and remove the old sharp,ls020b1dd01d.txt documentation which is
now obsolete.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109003000.119516-2-paul@crapouillou.net

dt-bindings: panel-simple: Add compatible for GiantPlus GPM940B0

Add a compatible string for the GiantPlus GPM740B0 3" QVGA TFT LCD
panel, and remove the old giantplus,gpm740b0.txt documentation which is
now obsolete.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109003000.119516-1-paul@crapouillou.net

drm/lima: use drm_sched_fault for error task handling

drm_sched_job_timedout works with drm_sched_stop as a pair,
so we'd better use the drm_sched_fault helper to make the
error and timeout handling go the same path.

This also fixes application hang when task error.

Reviewed-by: Vasily Khoruzhick <anarsoul@gmail.com>
Tested-by: Andreas Baierl <ichgeh@imkreisrum.de>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200101103831.22429-1-yuq825@gmail.com

drm/panel: Add support for AUO B116XAK01 panel

Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108235356.918189-2-robdclark@gmail.com

dt-bindings: display: panel: Add AUO B116XAK01 panel bindings

Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108235356.918189-1-robdclark@gmail.com

dt-bindings: Add vendor prefix for Satoz

Satoz is a Chinese TFT manufacturer.
Website: http://www.sat-sz.com/English/index.html

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200106151827.31511-1-miquel.raynal@bootlin.com

dt-bindings: one binding file for all simple panels

There is an increasing number of new simple panels.
Common for many of these simple panels are that they have one
mandatory power-supply and some of them have backlight and / or
an enable gpio.

The binding file to describe these panels adds overhead
that really do not add value.
The binding are known and there is nothing gained from a
dedicated binding file nor for any dedicated example.

The following patch introduces a single panel-simple.yaml
and converts two ampire bindings over to the new file.

The conversion - if applied will have following effects:

- The maintainer for the individual file will change
    There is no need for many different maintainers for a simple binding.
    We have the same situation with the panel-simple driver in the kernel.

- The license will change to (GPL-2.0-only OR BSD-2-Clause)
    There is usually only a single line copied from the original
    file, a line that is often copied from a datasheet.
    This license change should be acceptable considered what little
    is copied.
    If the license change is not OK we can use a dedicated binding
    file in these cases.

This is a follow-up on Rob's big patch converting a lot of panel bindings
to individual files:

"dt-bindings: display: Convert a bunch of panels to DT schema"
https://patchwork.ozlabs.org/patch/1197683/

The objectives with one file for the relevant simple panels are:
- Make it simpler to add bindings for simple panels
- Keep the number of bindings file lower and thus easier to find a
  relevant file to copy from when adding new panels.
- Keep the binding documentation for simple panels more consistent
- Make it simpler to add support for new panels

v3:
  - Whitespace fix (checkpatch)
  - Indent compatible (Rob h)
  - Indent comments to give compatible more visibility (Rob h)

v2:
  - spelling fixes (imirkin via irc, Rob)
  - updated description (Rob)
  - list properires in alphabetical order
  - added power-supply to example (Rob)
  - updated title
  - reworded changelog a little

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: devicetree@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20200102101712.5085-2-sam@ravnborg.org

gpu/drm: clean up white space in drm_legacy_lock_master_cleanup()

We moved this code to a different file and accidentally deleted a
newline.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108054312.yzlj5wmbdktejgob@kili.mountain

drm/omapdrm: use BUG_ON macro for error debugging.

Since the if statement only checks for the value of the `id` variable,
it can be replaced by the more concise BUG_ON() macro for error
reporting.
Issue found using coccinelle.

Signed-off-by: Wambui Karuga <wambui.karugax@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200102095515.7106-1-wambui.karugax@gmail.com

drm: meson: fix address type confusion

Casting a pointer to dma_addr_t produces a warning:

drivers/gpu/drm/meson/meson_rdma.c: In function 'meson_rdma_free':
drivers/gpu/drm/meson/meson_rdma.c:59:25: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
  priv->rdma.addr_phys = (dma_addr_t)NULL;

In this case, it's worse because the variable name has the suffix
'_phys', which often indicates a phys_addr_t rather than dma_addr_t,
i.e. yet another incompatible type.

Change it to use consistent naming and avoid NULL.

Fixes: 63fba242c464 ("drm/meson: add RDMA module driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107214653.1173199-1-arnd@arndb.de

drm/gma500: remove set but not used variables 'hist_reg'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/gma500/psb_irq.c: In function psb_irq_turn_off_dpst:
drivers/gpu/drm/gma500/psb_irq.c:473:6:
warning: variable hist_reg set but not used [-Wunused-but-set-variable]

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191227114811.14907-1-chenzhou10@huawei.com