Jonas Gorski [Mon, 18 Jan 2016 10:47:23 +0000 (10:47 +0000)]
brcm63xx: add support for Huawei HG622
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 48305
Jonas Gorski [Mon, 18 Jan 2016 10:46:58 +0000 (10:46 +0000)]
ipq806x: fix sysupgrade for AP148
AP148 uses lowercase name as boardname, so we need to use this in
platform.sh as well.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 48304
Jonas Gorski [Mon, 18 Jan 2016 10:46:50 +0000 (10:46 +0000)]
brcm63xx: fix platform gpio lookups for gpios < 32
Overwriting static strings is never a good idea, especially expecting
identical strings to be stored in different memory locations.
This caused the lookups to always return the second chip's name. Fix
this by just initializing the lookup with the right values, so we
don't need to modify the strings at all.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 48303
Jonas Gorski [Mon, 18 Jan 2016 10:46:47 +0000 (10:46 +0000)]
b53: update header register difinitions
BCM531x5 has two pontential cpu ports, and header mode can be enabled
independently on both.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 48302
Jo-Philipp Wich [Mon, 18 Jan 2016 09:23:17 +0000 (09:23 +0000)]
package/libs/libiconv: function names
Currently libiconv-stub and libiconv-full use different names
for functions iconv, iconv_open, and iconv_close.
This may lead to failures when building modules, e.g. with
apr-util when NLS is not activated.
The two modules libiconv-stub and libiconv-full should be
interchangeable, so we need the same function names.
cf.
http://git.savannah.gnu.org/cgit/libiconv.git/tree/include/iconv.h.in
After applying this patch execute
make distclean
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
SVN-Revision: 48301
Luka Perkov [Mon, 18 Jan 2016 06:43:50 +0000 (06:43 +0000)]
imx6: drop 4.1 support
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 48300
Luka Perkov [Mon, 18 Jan 2016 06:43:48 +0000 (06:43 +0000)]
imx6: drop 4.3 support
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 48299
Luka Perkov [Mon, 18 Jan 2016 06:40:16 +0000 (06:40 +0000)]
imx6: move to 4.4 kernel
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
SVN-Revision: 48298
Felix Fietkau [Sun, 17 Jan 2016 21:05:19 +0000 (21:05 +0000)]
mpc85xx: update to linux 4.4, remove unnecessary patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48297
Felix Fietkau [Sun, 17 Jan 2016 20:41:09 +0000 (20:41 +0000)]
iproute2: remove odd conffiles generation
This was generating a conffiles list that included the binary
and CONTROL/ files.
Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>
SVN-Revision: 48296
Felix Fietkau [Sun, 17 Jan 2016 19:56:16 +0000 (19:56 +0000)]
lantiq: Remove incorrect PCIe compatible strings
Re-defining the compatible property is not required since the correct
value is inherited from vr9.dtsi.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 48295
Felix Fietkau [Sun, 17 Jan 2016 19:56:10 +0000 (19:56 +0000)]
lantiq: Remove the old SPI driver patch
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 48294
Felix Fietkau [Sun, 17 Jan 2016 19:56:03 +0000 (19:56 +0000)]
lantiq: Switch to the new SPI driver
Compared to the "old" driver:
- Each device must assign a pinctrl setting to the SPI node to allow the
new SPI driver to configure the SPI pins.
While here we are also using separate input and output settings so we
are independent of whether the bootloader configures the pins correctly.
- We use the new "compatible" strings to make the driver choose the
correct number of chip-selects for each SoC.
- The new driver starts counting the chip-selects at 1 (instead of 0, like
the old one did). Thus we have to adjust the devices accordingly.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 48293
Felix Fietkau [Sun, 17 Jan 2016 19:55:55 +0000 (19:55 +0000)]
lantiq: Add a rewritten version of the SPI driver
The new driver provides a few improvements over the old one:
- Separate compatible strings per SoC type (this allows removing some
hardcoded of_device_is_compatible() checks)
- It does not rely upon spi-bitbang anymore
- chip-selects are numbered as in the datasheet (= starting at 1 instead
of 0)
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 48292
Felix Fietkau [Sun, 17 Jan 2016 19:55:48 +0000 (19:55 +0000)]
lantiq: Disable CONFIG_SPI_GPIO
All devices are now using the HW SPI driver, so this is not necessary
anymore.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 48291
Felix Fietkau [Sun, 17 Jan 2016 19:55:42 +0000 (19:55 +0000)]
lantiq: Enable the hardware SPI driver on the DGN3500/DGN3500B
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 48290
Felix Fietkau [Sun, 17 Jan 2016 19:55:37 +0000 (19:55 +0000)]
lantiq: Enable SPI for the EASY80920 board again
Also switch to the SPI definition provided by vr9.dtsi
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 48289
Felix Fietkau [Sun, 17 Jan 2016 19:55:31 +0000 (19:55 +0000)]
lantiq: Switch FRITZ3370 from spi-gpio to the hardware SPI driver
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 48288
Felix Fietkau [Sun, 17 Jan 2016 19:55:25 +0000 (19:55 +0000)]
lantiq: Re-use the SPI node from vr9.dtsi in TDW89X0.dtsi
This removes the duplicate SPI register definition.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 48287
Felix Fietkau [Sun, 17 Jan 2016 19:55:17 +0000 (19:55 +0000)]
lantiq: Add the SPI node to ar9.dtsi and vr9.dtsi
This allows devices to use SPI without having to re-define (and thus
duplicating) the whole SPI node.
By default SPI is disabled (as before) because only few devices need it.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 48286
Felix Fietkau [Sun, 17 Jan 2016 19:55:10 +0000 (19:55 +0000)]
lantiq: Configure the PCIe reset GPIO using OF
After the latest pinctrl backports there are only 50 (instead of 56 as
before) GPIOs/pins exported (thus the first GPIO on VRX200 SoCs is now
462, before it was 456). This means that any hardcoded GPIOs have to be
adjusted.
This broke the PCIe driver (which seems to be the only driver which uses
hardcoded GPIO numbers), it only reports:
ifx_pcie_wait_phy_link_up timeout
ifx_pcie_wait_phy_link_up timeout
ifx_pcie_wait_phy_link_up timeout
ifx_pcie_wait_phy_link_up timeout
ifx_pcie_wait_phy_link_up timeout
pcie_rc_initialize link up failed!!!!!
To prevent more of these issues in the future we remove the hardcoded
PCIe reset GPIO definition and simply pass it via device-tree (like the
PCI driver does).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 48285
Felix Fietkau [Sun, 17 Jan 2016 19:55:04 +0000 (19:55 +0000)]
lantiq: Use the new pinctrl compatible strings
These were introduced in upstream commit
be14811c03cf "pinctrl/lantiq: introduce new dedicated devicetree
bindings" and finally allow us to use the individual pins within our dts
(for example spi_clk, etc.).
Please note that this changes the number of GPIOs which are available for
some SoCs. VRX200 SoCs for example only have 50 pins, but previously 56
pins were exposed. This means that all places which are using hardcoded
GPIO numbers (which are not passed via device-tree) need to be adjusted
(because the first GPIO number is now 462, instead of 456).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 48284
Felix Fietkau [Sun, 17 Jan 2016 19:54:59 +0000 (19:54 +0000)]
lantiq: Backport upstream pinctrl-xway patches from 4.5
Upstream commit
be14811c03cf2 "pinctrl/lantiq: introduce new dedicated
devicetree bindings" allows us to use each pin in the pinmux. This is
useful for example in the "spi" group which contains some pins which
are inputs, and some which are outputs.
These can only be used once the new compatible strings for the pinctrl
node are used.
Additionally 0150-lantiq-pinctrl-xway.patch and the "GPIO PORT3 fix"
(which was part of 0012-pinctrl-lantiq-fix-up-pinmux.patch) were
replaced with their upstream variants which are also in 4.5.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 48283
Felix Fietkau [Sun, 17 Jan 2016 19:23:14 +0000 (19:23 +0000)]
lantiq: ltq-deu: Make the DEU driver compatible with linux 4.2 and newer
Upstream linux 4.2 commit
84be456f883c4685680fba8e5154b5f72e92957e
"remove <asm/scatterlist.h>" requires us to include linux/scatterlist.h
instead. This also works with older kernels (at least 4.1, thanks to
Hauke Mehrtens for testing).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 48282
Jo-Philipp Wich [Sun, 17 Jan 2016 18:24:30 +0000 (18:24 +0000)]
base-files: Fix sysupgrade overlay saving
A previous change to sysupgrade moved the overlay files into upper/
The -c switch generates a list of files to backup, but the sed
calls did not take this into consideration.
Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>
SVN-Revision: 48281
Jo-Philipp Wich [Sun, 17 Jan 2016 17:15:01 +0000 (17:15 +0000)]
netifd: fix PKG_VERSION (#21630)
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48280
Gabor Juhos [Sun, 17 Jan 2016 15:29:03 +0000 (15:29 +0000)]
ar71xx/lzma-loader: fix O32 ABI conformance
According to the calling convention of the o32 ABI the caller
function must reserve stack space for $a0-$a3 registers in case
the callee needs to save its arguments.
The assembly code of the loader does not reserve stack space for
these registers thus when the 'loader_main' function needs to save
its arguments, those will be stored in the 'workspace' area instead
of the stack.
Because the workspace area is also used by other part of the code, the
saved register values gets overwritten and this often leads to failed
kernel boots.
Fix the code to reserve stack space for the registers to avoid this
error.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 48279
Felix Fietkau [Sun, 17 Jan 2016 12:41:06 +0000 (12:41 +0000)]
uclient: update to the latest version, adds many fixes/features
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48278
Felix Fietkau [Sun, 17 Jan 2016 11:17:06 +0000 (11:17 +0000)]
kernel: add missing kernel config symbol for crypto-rng (fixes #21596)
Signed-off-by: Lucian Cristian <luci@createc.ro>
SVN-Revision: 48277
Felix Fietkau [Sun, 17 Jan 2016 11:16:56 +0000 (11:16 +0000)]
ar71xx: Use full 128MB flash on Netgear WNDR4300 and WNDR3700v4
Change MTD on WNDR4300 and WNDR3700v4 to fully utilize the 128MB flash.
Credit to @Tuochenlyu on GitHub.
Signed-off-by: Chris Marchesi <chrism@vancluevertech.com>
SVN-Revision: 48276
Felix Fietkau [Sun, 17 Jan 2016 11:16:52 +0000 (11:16 +0000)]
mpc85xx: Add PTP node for TL-WD4900 in device tree
PTP requires at least one timer to be 1PPS so describe it.
For testing, load kernel module gianfar_ptp and use ptp4l
from linuxptp.
Copied from FSL P1010RDB reference design.
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
SVN-Revision: 48275
Felix Fietkau [Sun, 17 Jan 2016 11:06:02 +0000 (11:06 +0000)]
network: add virtual tunnel interface (VTI) support
This adds support for configuring VTI interfaces within /etc/config/network.
VTI interfaces are used to create IPsec tunnel interfaces. These interfaces
may be used for routing and other purposes.
Example config:
config interface 'vti1'
option proto 'vti'
option mtu '1500'
option tunlink 'wan'
option peeraddr '192.168.5.16'
option zone 'VPN'
option ikey 2
option okey 2
config interface 'vti1_static'
option proto 'static'
option ifname '@vti1'
option ipaddr '192.168.7.2/24'
The options ikey and okey correspond to the fwmark value of a ipsec policy.
The may be null if you do not want fwmarks.
Also peeraddr may be 0.0.0 if you want all ESP packets go through the
interface.
Example strongswan config:
conn vti
left=%any
leftcert=peer2.test.der
leftid=@peer2.test
right=192.168.5.16
rightid=@peer3.test
leftsubnet=0.0.0.0/0
rightsubnet=0.0.0.0/0
mark=2
auto=route
Signed-off-by: André Valentin <avalentin@marcant.net>
SVN-Revision: 48274
Felix Fietkau [Sun, 17 Jan 2016 11:05:53 +0000 (11:05 +0000)]
netifd: update to the latest version, adds VTI support and a policy routing fix
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48273
Felix Fietkau [Sun, 17 Jan 2016 11:03:41 +0000 (11:03 +0000)]
kernel: add usb-net-sr9700 package
Add support for
CoreChip-sz SR9700 based USB 1.1 10/100 ethernet devices
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
SVN-Revision: 48272
Felix Fietkau [Sun, 17 Jan 2016 11:03:36 +0000 (11:03 +0000)]
ca-certificates: update to version
20160104
- update to latest version
20160104
- remove cpu dependency (PKGARCH:=all)
- set myself as package maintainer
Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
SVN-Revision: 48271
Felix Fietkau [Sun, 17 Jan 2016 10:47:32 +0000 (10:47 +0000)]
build: add @APACHE download facility
The Apache Software Foundation offers diverse download mirros.
For packaging Apache software a new alias @APACHE is defined.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
SVN-Revision: 48270
Felix Fietkau [Sun, 17 Jan 2016 10:47:10 +0000 (10:47 +0000)]
lantiq: Fixed brnImage signature for the VGV7510KW22BRN images
The old signature only worked because brnboot ignores the leading "5" in
the signature. We can see the correct signature when flashing a brnImage
via recovery web-interface, in this case brnboot reports:
[CGI-Signature Check] buf:[BRNDA6431], sigInFlash:[BRNDA6431]
Thanks to Mathias Kresin for reporting this.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 48269
Felix Fietkau [Sun, 17 Jan 2016 10:42:46 +0000 (10:42 +0000)]
ar8327: add IGMP Snooping support
This add support for IGMP Snooping on atheros switches (disabled by default),
which avoids flooding the network with multicast data.
Tested on TL-WDR4300: disabling IGMP Snooping results in multicast flooding
on each specific port, enabling it back again prevents each port from
receiving all multicast packets.
Partially based on: http://patchwork.ozlabs.org/patch/418122/
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 48268
Felix Fietkau [Sun, 17 Jan 2016 10:42:32 +0000 (10:42 +0000)]
Support LibreSSL as provider of openssl
The build scripts check for openssl by grepping the string "OpenSSL" in
the output of openssl version command. LibreSSL fails this test as it
outputs something like "LibreSSL 2.2.4". This patch fix the
prereq-bulid.mk file so that it accepts LibreSSL as openssl provider as
well.
Signed-off-by: Marek Behun <kabel@blackhole.sk>
SVN-Revision: 48267
Felix Fietkau [Sun, 17 Jan 2016 10:42:23 +0000 (10:42 +0000)]
brcm2708: add linux 4.4 support
- random-bcm2708 and spi-bcm2708 have been removed.
- sound-soc-bcm2708-i2s has been upstreamed as sound-soc-bcm2835-i2s.
Let's keep linux 4.1 for a while, since linux 4.4 appears to have some issues
with multicast traffic on RPi ethernet:
https://gist.github.com/Noltari/
5b1cfdecce5ed4bc08fd
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 48266
Felix Fietkau [Sun, 17 Jan 2016 10:41:52 +0000 (10:41 +0000)]
uml: update to linux 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48265
Felix Fietkau [Sun, 17 Jan 2016 10:41:46 +0000 (10:41 +0000)]
lantiq: Switch to the generic mtdsplit parser implementations
This removes the arch-specific mtdsplit parsers and enables the generic
implementations for brnImage, EVA and TP-Link instead.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 48264
Felix Fietkau [Sun, 17 Jan 2016 10:41:30 +0000 (10:41 +0000)]
kernel: mtdsplit_squashfs: Align with the erase-block size
On most image types the rootfs ends at an erase-block. However, at least
with brnImages this is not the case: while the partitions are aligned
with the erase-block size there is a 12 byte footer at the end of the
partition which must not be touched by any filesystem. This lead to a
rootfs_data partition which was not aligned properly (and thus ended up
being readonly):
0x000000480000-0x00000085a800 : "rootfs_data" (128 KiB EB)
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 48263
Felix Fietkau [Sun, 17 Jan 2016 10:41:08 +0000 (10:41 +0000)]
kernel: mtdsplit: add support for EVA images
This allows splitting EVA images (usually found in fritz devices). The
firmware will be split into a kernel and a separate rootfs partition.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 48262
Felix Fietkau [Sun, 17 Jan 2016 10:40:51 +0000 (10:40 +0000)]
kernel: mtdsplit: add support for brnImages
This adds brnImage (used with the brnboot bootloader) firmware parsing
support. brnboot verifies the integrity of the firmware stored on the
"Code Image" partitions by looking at the 12 byte footer at the very end
of the partition. This footer contains the checksum of the original
brnImage (kernel + rootfs/squashfs) and must not be touched (by our JFFS2
rootfs_data - otherwise the image will not be bootable anymore).
Big thanks to Mathias Kresin for analyzing the brnImage structure and
finding out the information how to keep images valid even when adding a
nested rootfs_data partition.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 48261
Felix Fietkau [Sun, 17 Jan 2016 10:40:36 +0000 (10:40 +0000)]
kernel: disable bogus DEVTMPFS config overrides
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48260
Felix Fietkau [Sat, 16 Jan 2016 10:24:15 +0000 (10:24 +0000)]
download.pl: fix openssl sha256 digest output
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48259
Felix Fietkau [Sat, 16 Jan 2016 09:14:03 +0000 (09:14 +0000)]
ustream-ssl: fix copy&paste mistake in mbedtls variant title
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48258
Felix Fietkau [Sat, 16 Jan 2016 00:20:05 +0000 (00:20 +0000)]
polarssl: update to 1.3.16, fixes intermediate certificate validation
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48257
Felix Fietkau [Sat, 16 Jan 2016 00:20:01 +0000 (00:20 +0000)]
ustream-ssl: update to the latest version, adds mbedtls variant
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48256
Felix Fietkau [Sat, 16 Jan 2016 00:19:54 +0000 (00:19 +0000)]
libubox: update to the latest version, adds lua/ustream fixes and extends usock
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48255
Felix Fietkau [Sat, 16 Jan 2016 00:19:47 +0000 (00:19 +0000)]
mbedtls: update to version 2.2.1
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48254
Felix Fietkau [Sat, 16 Jan 2016 00:19:41 +0000 (00:19 +0000)]
scripts/download.pl: add SHA-256 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48253
Zoltan Herpai [Fri, 15 Jan 2016 20:27:32 +0000 (20:27 +0000)]
packages: bump uboot-sunxi to 2016.01
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 48252
Felix Fietkau [Fri, 15 Jan 2016 16:58:00 +0000 (16:58 +0000)]
mwlwifi: fix build with latest mac80211
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48251
Felix Fietkau [Fri, 15 Jan 2016 16:53:44 +0000 (16:53 +0000)]
mt76: update to the latest version, fixes build with latest mac80211
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48250
Felix Fietkau [Fri, 15 Jan 2016 15:18:23 +0000 (15:18 +0000)]
imx6: kernel: Add Micrel PHY used on Apalis SOM
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Cc: Luka Perkov <luka@openwrt.org>
SVN-Revision: 48249
Felix Fietkau [Fri, 15 Jan 2016 15:18:18 +0000 (15:18 +0000)]
imx6: add 4.4 support
Build and boot tested on the following hardware:
* GW54xx
* GW53xx
* GW52xx
* GW51xx
* GW552x
* GW551x
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
SVN-Revision: 48248
Felix Fietkau [Fri, 15 Jan 2016 15:03:48 +0000 (15:03 +0000)]
mac80211: update to wireless-testing 2016-01-10
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48247
Felix Fietkau [Fri, 15 Jan 2016 11:24:15 +0000 (11:24 +0000)]
dnsmasq: Add option --min-port
By default dnsmasq uses random ports for outbound dns queries;
when the minport UCI option is specified the ports used will
always be larger than the specified value.
This is usefull for systems behind firewalls.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 48244
Felix Fietkau [Fri, 15 Jan 2016 11:24:09 +0000 (11:24 +0000)]
dropbear: update version to 2015.71
Update dropbear to version 2015.71, released on 3 Dec 2015.
Refresh patches.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 48243
Felix Fietkau [Fri, 15 Jan 2016 10:49:21 +0000 (10:49 +0000)]
kernel: add missing kmod-video-videobuf2's object file in 4.4
CONFIG_VIDEOBUF2_CORE produces two object files in Linux >= 4.4.
Conditionally add the new file to FILES of kmod-video-videobuf2.
Signed-off-by: Jan Čermák <jan.cermak@nic.cz>
SVN-Revision: 48242
Felix Fietkau [Fri, 15 Jan 2016 10:49:11 +0000 (10:49 +0000)]
arc770: move arc patches to target/linux/generic
Given those patches are relevant to any ARC platform and even
ISA version it makes perfect sense for patches to exist
in one place instead of being duplicated for each new ARC-based ASIC.
Note this is a prerequisite for upstreaming of ARC HS38 support in
OpenWRT.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Jo-Philipp Wich <jow@openwrt.org>
Cc: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 48241
Felix Fietkau [Fri, 15 Jan 2016 10:49:01 +0000 (10:49 +0000)]
arc770: bump linux kernel from 4.3 to 4.4
This switch involved:
[1] Regeneration of config (few options went away)
[2] Regeneration of patches so they apply cleanly (different offsets)
[3] Update of .dts files because we now explicitly specify
memory regions in use as opposed to previously used offset
from 0x8000_0000
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Jo-Philipp Wich <jow@openwrt.org>
Cc: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 48240
Felix Fietkau [Fri, 15 Jan 2016 10:47:14 +0000 (10:47 +0000)]
kernel: compile out SNMP MIB related counting if debloat-proc is active - improves network stack performance
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48239
Jo-Philipp Wich [Thu, 14 Jan 2016 12:52:18 +0000 (12:52 +0000)]
procd: align early init PATH with rest of OpenWrt
This fixes diverging executable search paths observed in programs
launched throughn etifd which in turn inherited the search path from
procd early on boot.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48235
Felix Fietkau [Thu, 14 Jan 2016 11:59:10 +0000 (11:59 +0000)]
mt76: update to the latest version, fixes signal strength reporting
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48234
Felix Fietkau [Thu, 14 Jan 2016 02:17:49 +0000 (02:17 +0000)]
ath9k: add support for a newer tx gain table used in some TP-Link devices
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48233
Felix Fietkau [Thu, 14 Jan 2016 01:00:42 +0000 (01:00 +0000)]
mt76: update to the latest version, adds mac address fixes and some performance tuning
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48232
Felix Fietkau [Thu, 14 Jan 2016 01:00:38 +0000 (01:00 +0000)]
kernel: backport perf build fixes to 4.1
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48231
Felix Fietkau [Thu, 14 Jan 2016 01:00:13 +0000 (01:00 +0000)]
kernel: remove obsolete config symbols from 4.4
Only remove old symbols for 4.4 since older Kernels might be
removed sooner/later and 4.4 is the next LTS
build tested against:
omap 4.4 CONFIG_ALL_KMODS
x86_64
List of enabled & orphaned symbols:
-CONFIG_ARPD=y
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_CAVIUM_OCTEON_HELPER=y
-CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
-CONFIG_DISABLE_DEV_COREDUMP=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_EXT4_FS_XATTR=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_TIME=y
-CONFIG_HOTPLUG=y
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
-CONFIG_INLINE_SPIN_UNLOCK=y
-CONFIG_LEDS_GPIO_OF=y
-CONFIG_LEDS_GPIO_PLATFORM=y
-CONFIG_MFD_SUPPORT=y
-CONFIG_MISC_DEVICES=y
-CONFIG_MTD_CHAR=y
-CONFIG_NETDEV_1000=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
-CONFIG_NET_VENDOR_SILICOM=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_UIDGID_STRICT_TYPE_CHECKS=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_EZUSB=y
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 48230
Hauke Mehrtens [Wed, 13 Jan 2016 20:46:12 +0000 (20:46 +0000)]
lantiq: remove clk_round_rate() patch
This patch was merged into upstream Linux 4.1.
This fixes #21587 and was introduced in r48223.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 48229
Felix Fietkau [Wed, 13 Jan 2016 16:22:16 +0000 (16:22 +0000)]
ar71xx: fix ethernet MAC reset on DMA hang
Fully reset the chip like on a full up/down, but without the PHY
statemachine restart.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48228
Felix Fietkau [Wed, 13 Jan 2016 16:22:05 +0000 (16:22 +0000)]
ar71xx: extend ethernet DMA stuck check to all ar724x (and newer) chips
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48227
Felix Fietkau [Wed, 13 Jan 2016 11:32:41 +0000 (11:32 +0000)]
ubus: update to the latest version, fixes an acl related crash
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48226
Hauke Mehrtens [Tue, 12 Jan 2016 20:53:04 +0000 (20:53 +0000)]
kernel/3.18: update to version 3.18.25
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 48225
Hauke Mehrtens [Tue, 12 Jan 2016 20:52:19 +0000 (20:52 +0000)]
kernel/4.3: update to version 4.3.3
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de
SVN-Revision: 48224
Hauke Mehrtens [Tue, 12 Jan 2016 20:51:34 +0000 (20:51 +0000)]
kernel/4.1: update to version 4.1.15
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 48223
Hauke Mehrtens [Tue, 12 Jan 2016 20:50:41 +0000 (20:50 +0000)]
kernel: refresh patches for kernel 4.4
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 48222
Felix Fietkau [Tue, 12 Jan 2016 16:42:12 +0000 (16:42 +0000)]
perf: fix strerror_r override detection, apparently part of tools/ relies on non-GNU behavior
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48221
Imre Kaloz [Tue, 12 Jan 2016 14:28:09 +0000 (14:28 +0000)]
mac80211: resync regulatory db with master-2015-12-14
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 48219
Felix Fietkau [Tue, 12 Jan 2016 11:15:34 +0000 (11:15 +0000)]
perf: fix build errors on x86 and other platforms
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48218
Felix Fietkau [Tue, 12 Jan 2016 10:08:18 +0000 (10:08 +0000)]
pxa: moved to targets feed
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48217
Felix Fietkau [Tue, 12 Jan 2016 10:04:55 +0000 (10:04 +0000)]
x86: update to linux 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48216
Felix Fietkau [Tue, 12 Jan 2016 10:04:47 +0000 (10:04 +0000)]
kernel: add missing symbols for linux 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48215
Jo-Philipp Wich [Tue, 12 Jan 2016 10:03:50 +0000 (10:03 +0000)]
dnsmasq: add local hostname record for own lan ula address as well
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48214
Jo-Philipp Wich [Tue, 12 Jan 2016 09:25:45 +0000 (09:25 +0000)]
sdk: add base repository fallback
When the build system cannot infer its own repository url then let it fall
back to http://git.openwrt.org/ for the base feed.
The path to openwrt.git is guessed from the VERSION_NUMBER variable:
"unknown" or "r12345" -> http://git.openwrt.org/openwrt.git
"15.05.1" -> http://git.openwrt.org/15.05/openwrt.git
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48212
Jo-Philipp Wich [Tue, 12 Jan 2016 07:51:56 +0000 (07:51 +0000)]
gettext-full: make autopoint and gettextize reloctable
The autopoint and gettextize host utilities contain hardcoded staging dir
paths which need to be overridden for the SDK environment.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 48208
Felix Fietkau [Mon, 11 Jan 2016 23:11:13 +0000 (23:11 +0000)]
build: remove SDK special case for kernel module packages
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48207
Felix Fietkau [Mon, 11 Jan 2016 23:11:09 +0000 (23:11 +0000)]
target/sdk: include modules.builtin, it is necessary for packaging kernel modules
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48206
Felix Fietkau [Mon, 11 Jan 2016 20:51:19 +0000 (20:51 +0000)]
linux-firmware: fix mediatek/ralink package names
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48204
Felix Fietkau [Mon, 11 Jan 2016 20:13:17 +0000 (20:13 +0000)]
kernel: Update kernel 4.4 to 4.4.0
This removes one patch which was applied upstream with commit
67b9bcd36906e12a15ffec19463afbbd6a41660e. All other patches were
refreshed.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 48203
Rafał Miłecki [Mon, 11 Jan 2016 18:51:47 +0000 (18:51 +0000)]
hostapd: fix disassociation with FullMAC drivers and multi-BSS
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 48202
Felix Fietkau [Mon, 11 Jan 2016 18:37:28 +0000 (18:37 +0000)]
openvpn: update to version 2.3.10
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48201
Felix Fietkau [Mon, 11 Jan 2016 12:29:59 +0000 (12:29 +0000)]
uci: update to the latest version, adds a small optimization to uci commit
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48200
Felix Fietkau [Sun, 10 Jan 2016 22:38:59 +0000 (22:38 +0000)]
dropbear: enable curve25519 support by default, increases compressed binary size by ~5 kb
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48196
Felix Fietkau [Sun, 10 Jan 2016 22:38:53 +0000 (22:38 +0000)]
dropbear: split out curve25519 support into a separate config option
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48195
Felix Fietkau [Sun, 10 Jan 2016 18:04:36 +0000 (18:04 +0000)]
fstools: fix off-by-one error in the version number
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48193
Felix Fietkau [Sun, 10 Jan 2016 17:36:53 +0000 (17:36 +0000)]
fstools: update to the latest version, fixes filesystem state rewrite on every boot
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48191
Felix Fietkau [Sun, 10 Jan 2016 17:19:51 +0000 (17:19 +0000)]
x86: remove obsolete patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 48190
projects / openwrt / svn-archive / archive.git / log