Zoltan Herpai [Thu, 26 Mar 2015 23:34:43 +0000 (23:34 +0000)]
mxs: add sdcard image builder
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 45052
Felix Fietkau [Thu, 26 Mar 2015 23:34:33 +0000 (23:34 +0000)]
hostapd: add 802.11r support
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 45051
Felix Fietkau [Thu, 26 Mar 2015 23:34:24 +0000 (23:34 +0000)]
hostapd: allow multiple key management algorithms
To enable 802.11r, wpa_key_mgmt should contain FT-EAP or FT-PSK. Allow
multiple key management algorithms to make this possible.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 45050
Felix Fietkau [Thu, 26 Mar 2015 23:34:10 +0000 (23:34 +0000)]
hostapd: append nasid to config for all WPA types
The 802.11r implementation in hostapd uses nas_identifier as PMK-R0 Key
Holder identifier. As 802.11r can also be used with WPA Personal, nasid
should be appended to the hostapd config for all WPA types.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 45049
Felix Fietkau [Thu, 26 Mar 2015 23:34:01 +0000 (23:34 +0000)]
hostapd: add dependency to hostapd-common
'hostapd-common' is needed by all of the variants for wifi to function
correctly (a number of the target profiles simply select 'wpad-mini').
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 45048
Felix Fietkau [Thu, 26 Mar 2015 23:33:56 +0000 (23:33 +0000)]
hostapd: package wpad-mesh and wpa_supplicant-mesh variants
These new variants include support for mesh mode and SAE crypto.
They always depend on openssl as EC operations are not provided by
the internal crypto implementation.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 45047
Felix Fietkau [Thu, 26 Mar 2015 23:33:52 +0000 (23:33 +0000)]
hostapd: add switch_chan and set_vendor_elements ubus methods
Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45046
Felix Fietkau [Thu, 26 Mar 2015 23:33:47 +0000 (23:33 +0000)]
hostapd: update hostapd to 2015-03-25
madwifi was dropped upstream, can't find it anywhere in OpenWrt
either, thus finally burrying madwifi.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45045
Zoltan Herpai [Thu, 26 Mar 2015 23:04:27 +0000 (23:04 +0000)]
mxs: enable uboot-mxs-duckbill build for duckbill profile
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 45044
Luka Perkov [Thu, 26 Mar 2015 22:48:31 +0000 (22:48 +0000)]
generic: drop old kirkwood mach types
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45043
Zoltan Herpai [Thu, 26 Mar 2015 22:39:06 +0000 (22:39 +0000)]
packages: uboot-mxs: bump to 2015.01
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 45042
Zoltan Herpai [Thu, 26 Mar 2015 22:18:47 +0000 (22:18 +0000)]
mxs: add 3.18 support
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 45041
Felix Fietkau [Thu, 26 Mar 2015 20:43:12 +0000 (20:43 +0000)]
uci: update to the latest version
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45040
Felix Fietkau [Thu, 26 Mar 2015 20:37:19 +0000 (20:37 +0000)]
gemini: make dd commands more portable
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45039
Felix Fietkau [Thu, 26 Mar 2015 20:37:09 +0000 (20:37 +0000)]
gemini: switch mantainer to myself
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45038
Felix Fietkau [Thu, 26 Mar 2015 20:36:59 +0000 (20:36 +0000)]
gemini: nuke 3.10 support
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45037
Felix Fietkau [Thu, 26 Mar 2015 20:36:49 +0000 (20:36 +0000)]
gemini: remove broken flag
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45036
Felix Fietkau [Thu, 26 Mar 2015 20:36:40 +0000 (20:36 +0000)]
gemini: switch to 3.18
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45035
Felix Fietkau [Thu, 26 Mar 2015 20:36:35 +0000 (20:36 +0000)]
gemini: don't build jffs2 image for Raidsonic board
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45034
Felix Fietkau [Thu, 26 Mar 2015 20:36:30 +0000 (20:36 +0000)]
gemini: add 3.18 support
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45033
John Crispin [Thu, 26 Mar 2015 20:30:18 +0000 (20:30 +0000)]
procd: fix jail/seccomp build depenedencies
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45032
Lars-Peter Clausen [Thu, 26 Mar 2015 19:46:01 +0000 (19:46 +0000)]
xburst: Update to 3.18
Update the xburst target to kernel version 3.18 and also remove the broken 3.10 support.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
SVN-Revision: 45031
Felix Fietkau [Thu, 26 Mar 2015 18:50:44 +0000 (18:50 +0000)]
ar71xx: fix image size checks for WNDR3700
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45030
Felix Fietkau [Thu, 26 Mar 2015 18:50:13 +0000 (18:50 +0000)]
build: ignore errors on copying firmware binaries from $(KDIR) to $(BIN_DIR)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45029
John Crispin [Thu, 26 Mar 2015 16:24:19 +0000 (16:24 +0000)]
ralink: drop xhci patch, it break !mt7621 builds
will re-add it tomorrow after fixing it
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45028
John Crispin [Thu, 26 Mar 2015 14:49:26 +0000 (14:49 +0000)]
ralink: the xhci patch broke ehci Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45027
Imre Kaloz [Thu, 26 Mar 2015 14:32:45 +0000 (14:32 +0000)]
mvebu: fixup usb3 support on the a38x
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45026
Imre Kaloz [Thu, 26 Mar 2015 14:06:42 +0000 (14:06 +0000)]
generic/4.0: upgrade to 4.0-rc5
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45025
Imre Kaloz [Thu, 26 Mar 2015 13:52:21 +0000 (13:52 +0000)]
mvebu: add a coherency fix which didn't make it to -stable, yet
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45024
Felix Fietkau [Thu, 26 Mar 2015 13:17:46 +0000 (13:17 +0000)]
mwlwifi: depend on TARGET_mvebu until it is fixed for non-OF platforms
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45023
John Crispin [Thu, 26 Mar 2015 12:23:02 +0000 (12:23 +0000)]
ralink: add default pinctrl node for mt7621 eval kit
fixes #19213
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45022
John Crispin [Thu, 26 Mar 2015 10:59:51 +0000 (10:59 +0000)]
ralink: mt7621 add ECHI OCHI XCHI support
The usb stroage not working since updated 3.18. Porting from MTK's source code.
Signed-off-by: wengbj <fl.service@t-firefly.com>
SVN-Revision: 45021
John Crispin [Thu, 26 Mar 2015 10:59:40 +0000 (10:59 +0000)]
netifd: update to latest git HEAD
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45020
John Crispin [Thu, 26 Mar 2015 10:59:36 +0000 (10:59 +0000)]
ralink: add FireWRT power button
Signed-off-by: Jay Weng <fl.service@t-firefly.com>
SVN-Revision: 45019
John Crispin [Thu, 26 Mar 2015 10:59:31 +0000 (10:59 +0000)]
ralink: MT7621 add i2c controller driver
ralink i2c driver is not working on MT7621 platform. Porting a new drivers from MTK's source code.
Last time i got some mess . This is new version.
Signed-off-by: Jay Weng <fl.service@t-firefly.com>
SVN-Revision: 45018
John Crispin [Thu, 26 Mar 2015 10:59:24 +0000 (10:59 +0000)]
kernel: add missing symbol
Signed-off-by: John Szakmeister <john@szakmeister.net>
SVN-Revision: 45017
John Crispin [Thu, 26 Mar 2015 10:59:10 +0000 (10:59 +0000)]
x86: add missing symbol to xen_domu
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45016
John Crispin [Thu, 26 Mar 2015 10:59:04 +0000 (10:59 +0000)]
toolchain: fix eglibc build when TOOLCHAINOPTS is not set
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45015
John Crispin [Thu, 26 Mar 2015 10:58:59 +0000 (10:58 +0000)]
cobalt: enable bridge
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45014
John Crispin [Thu, 26 Mar 2015 10:58:52 +0000 (10:58 +0000)]
lua: fix eglibc reference
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45013
John Crispin [Thu, 26 Mar 2015 10:58:44 +0000 (10:58 +0000)]
mdns: add jail and seccomp support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45012
John Crispin [Thu, 26 Mar 2015 10:58:30 +0000 (10:58 +0000)]
dnsmasq: add jail support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45011
John Crispin [Thu, 26 Mar 2015 10:58:25 +0000 (10:58 +0000)]
procd: add jail support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45010
John Crispin [Thu, 26 Mar 2015 10:58:17 +0000 (10:58 +0000)]
base-files: add a init.d option that will start the syscall tracer
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45009
John Crispin [Thu, 26 Mar 2015 10:58:11 +0000 (10:58 +0000)]
base-files: create jail folder on boot
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45008
John Crispin [Thu, 26 Mar 2015 10:58:03 +0000 (10:58 +0000)]
kernel: extend seccomp with a LOG action
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45007
John Crispin [Thu, 26 Mar 2015 10:57:56 +0000 (10:57 +0000)]
include: add a seccomp filter install wrapper
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45006
John Crispin [Thu, 26 Mar 2015 10:57:51 +0000 (10:57 +0000)]
kernel: cleanup seccomp symbol selection
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45005
John Crispin [Thu, 26 Mar 2015 10:57:44 +0000 (10:57 +0000)]
uclibc: add LD_PRELOAD support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45004
Felix Fietkau [Thu, 26 Mar 2015 10:42:36 +0000 (10:42 +0000)]
bcm53xx: use the correct kernel image
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45003
Imre Kaloz [Thu, 26 Mar 2015 09:42:59 +0000 (09:42 +0000)]
drop 3.19 support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45002
Steven Barth [Wed, 25 Mar 2015 18:24:54 +0000 (18:24 +0000)]
odhcp6c: various small fixes
SVN-Revision: 45001
Felix Fietkau [Wed, 25 Mar 2015 17:58:14 +0000 (17:58 +0000)]
ar71xx/image: move wdr3500/wdr3600/wdr4300 to new building code
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 45000
Felix Fietkau [Wed, 25 Mar 2015 17:58:10 +0000 (17:58 +0000)]
ar71xx/image: add tplink device template for new building code
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 44999
Felix Fietkau [Wed, 25 Mar 2015 17:58:05 +0000 (17:58 +0000)]
ar71xx/image: add Build/mktplinkfw as buildstep for new build code
Use `mktplinkfw sysupgrade` or `mktplinkfw factory` or
`mktplinkfw image`
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 44998
Felix Fietkau [Wed, 25 Mar 2015 17:58:00 +0000 (17:58 +0000)]
include/image.mk: define variable FILESYSTEM
Set it to the filesystem which is build. mktplinkfw need to know which filesystem
is used.
FILESYSTEM can be squashfs, jffs2-64k, ...
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 44997
Felix Fietkau [Wed, 25 Mar 2015 17:57:44 +0000 (17:57 +0000)]
bcm53xx: convert to new image building code
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44996
Jonas Gorski [Wed, 25 Mar 2015 15:37:38 +0000 (15:37 +0000)]
brcm63xx: use a lookup for bcmcia's ready gpio
Should fix pcmcia on BCM6348 and BCM6358 after switching to DT-probed
gpio controllers.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44995
Jonas Gorski [Wed, 25 Mar 2015 15:36:26 +0000 (15:36 +0000)]
brcm63xx: fix bcm96328avng board name
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44994
Jonas Gorski [Wed, 25 Mar 2015 15:36:15 +0000 (15:36 +0000)]
brcm63xx: fix bt v2500v dts based detection
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44993
Jonas Gorski [Wed, 25 Mar 2015 15:36:12 +0000 (15:36 +0000)]
brcm63xx: move RTA770(B)W to dts
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44992
Jonas Gorski [Wed, 25 Mar 2015 15:36:05 +0000 (15:36 +0000)]
brcm63xx: move MAGIC to dts
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44991
Jonas Gorski [Wed, 25 Mar 2015 15:35:57 +0000 (15:35 +0000)]
brcm63xx: move CPVA502+ to dts
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44990
Jonas Gorski [Wed, 25 Mar 2015 15:35:43 +0000 (15:35 +0000)]
brcm63xx: move dg834g v4 to dts
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44989
Jonas Gorski [Wed, 25 Mar 2015 15:35:37 +0000 (15:35 +0000)]
brcm63xx: move dsl-2640u to dts
Also build image again(?).
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44988
Jonas Gorski [Wed, 25 Mar 2015 15:35:24 +0000 (15:35 +0000)]
brcm63xx: move bcm963268bu_p300 to dts
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44987
Jonas Gorski [Wed, 25 Mar 2015 15:35:15 +0000 (15:35 +0000)]
brcm63xx: fix compilation on 3.14
Fixes the following issue:
drivers/gpio/gpio-bcm63xx.c: In function 'bcm63xx_gpio_probe':
drivers/gpio/gpio-bcm63xx.c:80:4: error: implicit declaration of function 'devm_kasprintf' [-Werror=implicit-function-declaration]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44986
Jonas Gorski [Wed, 25 Mar 2015 15:35:12 +0000 (15:35 +0000)]
brcm63xx: Add BT Home Hub 2A support.
Support for the BT HomeHub 2.0 Type A.
This router was manufactured by Thomson, and it's BCM6358 based.
The leds are controled by two chained HC594, all working ok. The BCM5325
switch has the RESET# pin wired to the GPIO15, but currently there is no
way to tell the b53 driver how to get this gpio number in brcm63xx,
therefore swconfig won't use it when performing a switch reset.
The patch was tested with several firmwares, and all except unsupported
stuff (i.e xDSL) works pretty well.
Tested-by: Tahir <tahir00ali@gmail.com>
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
SVN-Revision: 44985
Jonas Gorski [Wed, 25 Mar 2015 15:34:59 +0000 (15:34 +0000)]
brcm63xx: move kernel load address to 8MiB
Fixes boot when uncompressed kernel is > 4 MiB (#19251).
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44984
Jonas Gorski [Wed, 25 Mar 2015 15:34:45 +0000 (15:34 +0000)]
brcm63xx: hcsimage: respect load address
Respect the vmlinux load address when generating images.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44983
Jonas Gorski [Wed, 25 Mar 2015 15:34:40 +0000 (15:34 +0000)]
brcm63xx: add Livebox 1 firmware image generation
Currently there isn't images ready for flashing liveboxes boards. This
patch adds a script and the code to call it in the bcm63xx images
builder makefile to generate the livebox 1 firmware.
I removed some lines to avoid generating unneded files in the bin/ dir
for this board. And added code to generate a squashed rootfs aligned to
64 kB since the current one in the /bin dir is 128 kB aligned and
doesn't work. Still no sysupgrade support for this board. Upgrading from
within openwrt can be done writing with mtd the kernel, and then the 64k
aligned rootfs.
Regards
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
[jogo: use sed instead of a separate shell script for the boot script, make it
respect the load address]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44982
Jonas Gorski [Wed, 25 Mar 2015 15:34:26 +0000 (15:34 +0000)]
brcm63xx: add a dummy image recipe for boards missing proper images
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44981
Jonas Gorski [Wed, 25 Mar 2015 15:34:23 +0000 (15:34 +0000)]
brcm63xx: drop non-dtb image recipe
All images generated contain dtbs, so it is now unused.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 44980
Felix Fietkau [Wed, 25 Mar 2015 14:30:53 +0000 (14:30 +0000)]
image.mk: allow image build code to run a per-filesystem prepare step
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44979
Felix Fietkau [Wed, 25 Mar 2015 14:30:46 +0000 (14:30 +0000)]
kernel: merge upstream bgmac driver improvements
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44978
Felix Fietkau [Wed, 25 Mar 2015 14:30:40 +0000 (14:30 +0000)]
bcm53xx: enable the full-line-of-zero optimization in the cache controller
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44977
Felix Fietkau [Wed, 25 Mar 2015 14:29:23 +0000 (14:29 +0000)]
toolchain/glibc: remove broken eglibc 2.15 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44976
Felix Fietkau [Wed, 25 Mar 2015 14:29:17 +0000 (14:29 +0000)]
toolchain: drop obsolete references to the coldfire target
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44975
Gabor Juhos [Wed, 25 Mar 2015 08:59:12 +0000 (08:59 +0000)]
kernel: yaffs: use new_sync_{read,write} for 3.18+
Using the do_sync_{read,write} functions in conjunction
with the generic_file_{read,write}_iter causes a kernel
panic like this:
root@OpenWrt:/# mount -t yaffs /dev/mtdblock5 /mnt
[ 2884.110000] yaffs: dev is
32505861 name is "mtdblock5" rw
[ 2884.120000] yaffs: passed flags ""
root@OpenWrt:/# hexdump -vC -n 64 /mnt/kernel
[ 2902.700000] CPU 0 Unable to handle kernel paging request at virtual \
address
00000000, epc ==
00000000, ra ==
80129414
[ 2902.710000] Oops[#1]:
[ 2902.710000] CPU: 0 PID: 1030 Comm: hexdump Not tainted 3.18.9 #2
[ 2902.710000] task:
878e7a20 ti:
868c6000 task.ti:
868c6000
[ 2902.710000] $ 0 :
00000000 fffffff8 00000000 00000000
[ 2902.710000] $ 4 :
868c7e70 868c7ea8 00000001 868c7f08
[ 2902.710000] $ 8 :
00000038 80064f18 80072280 00000000
[ 2902.710000] $12 :
7fa152b8 7709e3a0 00c42008 7709e3a0
[ 2902.710000] $16 :
868c7f08 86a46000 00000010 878e7a20
[ 2902.710000] $20 :
7705c4b0 00000010 00000000 00000000
[ 2902.710000] $24 :
770960bc 7707dd78
[ 2902.710000] $28 :
868c6000 868c7e58 7f8e7030 80129414
[ 2902.710000] Hi :
00000000
[ 2902.710000] Lo :
ffffffff
[ 2902.710000] epc :
00000000 (null)
[ 2902.710000] Not tainted
[ 2902.710000] ra :
80129414 do_sync_read+0x7c/0xb4
[ 2902.710000] Status:
1900dc03 KERNEL EXL IE
[ 2902.710000] Cause :
00800008
[ 2902.710000] BadVA :
00000000
[ 2902.710000] PrId :
00019750 (MIPS 74Kc)
Change the yaffs code to use the new_sync_{read,write} functions
instead.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 44974
Felix Fietkau [Wed, 25 Mar 2015 00:11:07 +0000 (00:11 +0000)]
iproute2: fix build error with musl (#19302)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44973
Jo-Philipp Wich [Tue, 24 Mar 2015 13:13:01 +0000 (13:13 +0000)]
automake: portability fixes
The rework of the host tools discovery caused automake to embed
absolute paths to staging_dir/host/bin/perl into the shebang
of the generated automake executables.
Switch to the portable "/usr/bin/env perl" and enable global
warnings through "$^W" instead of the "-w" interpreter argument.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44972
Jo-Philipp Wich [Tue, 24 Mar 2015 13:12:52 +0000 (13:12 +0000)]
autoconf: portability fixes
The rework of the host tools discovery caused autoconf to embed
absolute paths to staging_dir/host/bin/perl into the shebang
of the generated autoconfig executables.
Switch to the portable "/usr/bin/env perl" and enable global
warnings through "$^W" instead of the "-w" interpreter argument.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 44971
Rafał Miłecki [Tue, 24 Mar 2015 10:39:10 +0000 (10:39 +0000)]
kernel: backport rest of bcma patches
This backports
bcma: allow disabling (not building) PCI driver
Revert "bcma: Kconfig: Let it depend on PCI"
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44970
Rafał Miłecki [Tue, 24 Mar 2015 10:38:59 +0000 (10:38 +0000)]
kernel: mac80211: backport bcma patch renaming IRQ control function
This backports upstream commit
702131e2a393b45174be326f1dbe20b658b4f157
bcma: move PCI IRQ control function to host specific code
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44969
Rafał Miłecki [Tue, 24 Mar 2015 10:38:50 +0000 (10:38 +0000)]
mark 3.10 targets as broken
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44968
Jo-Philipp Wich [Tue, 24 Mar 2015 10:13:08 +0000 (10:13 +0000)]
lldpd: add option to disable privilege separation
Helpful to disable when debugging lldpd crashes (when working on it).
When privilege separation is on, some crashes are stack-traced to
some privilege separation code.
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
SVN-Revision: 44967
Jo-Philipp Wich [Tue, 24 Mar 2015 10:08:12 +0000 (10:08 +0000)]
x86: use PARTUUID instead explicitly specifying the device by default
This changes the x86 image generation to match x86_64, using the PARTUUID for
the rootfs instead of explicitly configuring the device.
It unbreaks KVM with VirtIO, which uses /dev/vda2 instead of /dev/sda2.
Tested in QEMU/KVM with VirtIO, VirtualBox and VMware.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 44966
Felix Fietkau [Tue, 24 Mar 2015 10:07:40 +0000 (10:07 +0000)]
build: remove obsolete references to cris and avr32
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44965
Felix Fietkau [Tue, 24 Mar 2015 10:07:31 +0000 (10:07 +0000)]
toolchain: remove obsolete references to the cris architecture
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44964
Felix Fietkau [Tue, 24 Mar 2015 10:07:25 +0000 (10:07 +0000)]
toolchain: remove obsolete checks for avr32
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44963
Felix Fietkau [Tue, 24 Mar 2015 10:07:13 +0000 (10:07 +0000)]
toolchain: remove obsolete !avr32 dependency
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44962
Felix Fietkau [Tue, 24 Mar 2015 10:07:07 +0000 (10:07 +0000)]
uClibc: remove avr32 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44961
Felix Fietkau [Tue, 24 Mar 2015 10:06:55 +0000 (10:06 +0000)]
binutils: remove version 2.20.1 (only used by avr32)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44960
Jo-Philipp Wich [Tue, 24 Mar 2015 10:06:40 +0000 (10:06 +0000)]
x86_64: fix PARTUUID format with leading zeros
Otherwise the root device won't be found in 1/16 of the generated images
(whenever the signature starts with a zero digit).
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 44959
Felix Fietkau [Tue, 24 Mar 2015 10:06:38 +0000 (10:06 +0000)]
binutils: remove defunct binutils default version selection for aarch64
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44958
Felix Fietkau [Tue, 24 Mar 2015 10:06:27 +0000 (10:06 +0000)]
gcc: remove 4.4.7 (only used by avr32)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44957
Felix Fietkau [Tue, 24 Mar 2015 10:06:14 +0000 (10:06 +0000)]
avr32: remove target
It depends on obsolete compilers and only works on one device (an
evaluation board).
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 44956
Rafał Miłecki [Tue, 24 Mar 2015 07:15:31 +0000 (07:15 +0000)]
kernel: update bcma with most patches from wireless-drivers-next
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44955
Rafał Miłecki [Mon, 23 Mar 2015 18:39:16 +0000 (18:39 +0000)]
kernel: backport fixed_phy_register EXPORT fix from 3.19
This fixes
ERROR: "fixed_phy_register" [drivers/net/ethernet/broadcom/bgmac.ko] undefined!
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 44954
Steven Barth [Mon, 23 Mar 2015 14:51:56 +0000 (14:51 +0000)]
mac80211: disable for uml
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 44953
projects / openwrt / staging / robimarko.git / log