staging/vme: Use dev_ or pr_ printks in devices/vme_user.c

fixed below checkpatch warnings.
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...
- WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(...  to printk(KERN_INFO ...
- WARNING: Prefer netdev_dbg(netdev, ... then dev_dbg(dev, ... then pr_debug(...  to printk(KERN_DEBUG ...
- WARNING: Prefer netdev_warn(netdev, ... then dev_warn(dev, ... then pr_warn(...  to printk(KERN_WARNING ...

and add pr_fmt.

Signed-off-by: YAMANE Toshiaki <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: winbond: wb35rx_s: Fixed coding style issue

Fixed checpatch.pl reported ERRORs (excluding WARNING of line over 80 characters)

Signed-off-by: Adil Mujeeb <mujeeb.adil@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: winbond: mds: Fixed coding style issues

Removed printk tracing call

Signed-off-by: Adil Mujeeb <mujeeb.adil@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: winbond: wb35rx_f: Fixed coding style issues

Fixed checkpatch.pl reported ERRORs

Signed-off-by: Adil Mujeeb <mujeeb.adil@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: winbond: wbusb: Fixed coding style issue

Removed unnecessary printk and pr_debug tracing calls

Signed-off-by: Adil Mujeeb <mujeeb.adil@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: tidspbridge: dynload: reloc.c: checkpatch.pl cleanup

fix for few error messages as reported by checkpatch.pl

Signed-off-by: Kumar Amit Mehta <gmate.amit@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: tidspbridge: dynload: dload_internal.h: fix for coding style issue

fixed few error messages as reported by checkpatch.pl

Signed-off-by: Kumar Amit Mehta <gmate.amit@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: usbip: put usb_device and kill event handler thread in error cleanups.

If probe returns with error, the kthread is still alive even when all
usbip modules unloaded. So do cleanups in error handler.

Signed-off-by: harvey.yang <harvey.huawei.yang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: make remaining data tables const

Remaining vb_table.h data can be trivially made const.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: constify Tap4 data

Make Tap4 data const and adjust functions accordingly.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: eliminate pVBInfo->AGPReg

Access XGI340_AGPReg directly and make it const.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: eliminate pVBInfo->SR16

Inline constant values that are used only once.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: eliminate pVBInfo->CR6B

Access XGI340_CR6B directly and make it const.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: eliminate pVBInfo->SR21/22/25

In-line constants that are used only once.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: eliminate pVBInfo->StResInfo

Delete unused data.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: eliminate pVBInfo->ModeResInfo

Access XGI330_ModeResInfo directly and make it const.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: eliminate pVBInfo->ScreenOffset

Access XGI330_ScreenOffset directly and make it const.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: eliminate pVBInfo->VCLKData/VBVCLKData

Access XGI_VCLKData and XGI_VBVCLKData directly and make them const.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: eliminate pVBInfo->ECLKData

Access XGI340_ECLKData directly and make it const.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: eliminate pVBInfo->CR6E/6F/89

Eliminate dummy zero read-only global data.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: eliminate pVBInfo->UpdateCRT1

Access XGI_UpdateCRT1Table directly and make it const.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: eliminate pVBInfo->XGINEWUB_CRT1Table

Access XGI_CRT1Table directly and make it const.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: eliminate pVBInfo->RefIndex

Access XGI330_RefIndex directly and make it const.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: eliminate pVBInfo->EModeIDTable

Access XGI330_EModeIDTable directly and make it const.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: eliminate pVBInfo->StandTable

Access XGI330_StandTable directly and make it const.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: eliminate global TimingV/TimingH data

Use private data instead of global variables for timing data. Also,
get rid of the single element arrays.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: refactor XGI_GetLVDSData()

Refactor XGI_GetLVDSData() to avoid nesting and redundant ifs.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: vb_init.h: delete redundant declaration

XGI21_LCDCapList does not exist.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: constify LCD data

Make read-only LCD data tables const.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: XGI_GetLcdPtr: pass the table pointer directly

Let the caller pass the table pointer directly instead of using a magic
number to indicate which table to use.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: XGI_GetLcdPtr: delete redundant code

tempal is a write-only stack variable, and code touching it can be
deleted.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: XGI_GetLcdPtr: use real pointers for data tables

Use real pointers for LCD data tables to simplify the code.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: XGI_GetLcdPtr: replace xgifb_epllcd_crt1

Replace xgifb_epllcd_crt1 with two different tables to make further
cleanups easier.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: xgifb: XGI_GetLcdPtr: add separate table for VB_SIS301LV/VB_SIS302LV

Add a separate data table for VB_SIS301LV/VB_SIS302LV to avoid branching
and to make further cleanups easier.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: Remove WPA_SUPPLICANT_DRIVER_WEXT_SUPPORT macro

Already removed in parts of driver.

Removed in remainder.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: 64bit fixes: vCommandTimerWait change calculation of timer.

The timer appears to run too fast/race on 64 bit systems.

Using msecs_to_jiffies seems to cause a deadlock on 64 bit.

A calculation of (MSecond * HZ) / 1000 appears to run satisfactory.

Change BSSIDInfoCount to u32.

After this patch the driver can be successfully connect on little endian 64/32 bit systems.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: 64 bit fixes correct sizes of NDIS_802_11_ASSOCIATION_INFORMATION

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: 64 bit fixes TKIPvMixKey remove unsigned long

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: 64 bit fixes pdwIV is now u32

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: 64bit fixes: key.c/h change unsigned long to u32

Fixes long issues.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: 64 bit fixes: fix long warning messages.

Fixes long warning messages from patch
[PATCH 08/14] staging: vt6656: 64 bit fixes : correct all type sizes

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: 64 bit fixes : correct all type sizes

After this patch all BYTE/WORD/DWORD types can be replaced with the appropriate u sizes.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: 64 bit fixes: int.h replaced DWORD with u32

Fixes size of long issues.

Signed-off-by: Malcolm Priestley<tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: 64 bit fixes: rxtx.h Replace DWORD with u32.

Size of long issues.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: 64 bit fixes: use u32 for QWORD definition.

Size of long issues replace with u32.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: 64 bit fixes: RXbBulkInProcessData Framesize

Size of long issues.

Framesize correction replace DWORD with u32.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: 64bit fixes: desh.h fix size. replace DWORD with u32.

Fixes size of long issues replace DWORD with u32.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: 64bit fixes: dpc.c incorrect addressing of void structure.

Fixes the deadlock on 64 bit.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: 64 bit- Correctly address void structure.

Fixes 64 bit deadlock on successful association.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: fix viawget_wpa_param size

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: nsDMA_tx_packet: free tx context bBoolInUse

This reduces the number of free TX urbs when key is not found.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: dead code byCntMeasure/TKIPCounterMeasuresInvoked

remove TKIPCounterMeasuresInvoked and byCntMeasure

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: dead code remove upc.h

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: free skbuff and relocate on bReAllocSkb == FALSE.

bReAllocSkb == FALSE is when data is not fed to user land.

Free and relocate skbuff.

Where data is not sent return = FALSE from RXbBulkInProcessData.

This appears to reduce false errors when a reused skbuff has old data.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6656: no need to bIndicateReceive when no bytes to read.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: Fixed size of BEACON_INTERVAL register

BEACON_INTERVAL register is 16-bit, not 32-bit

Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: Removed empty stub read_acadapter_file()

Removed empty read_acadapter_file() and priv->PowerProfile that never
changes its value

Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: Removed unused fields in r8180_priv

Removed unused fields in r8180_priv and dead code that appeared after
field removal

Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: Removed unneeded reads from EEPROM

Removed unneeded reads from EEPROM and some unnecessary conditions

Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: Use ARRAY_SIZE instead of in-code constants

Use ARRAY_SIZE macro instead of hardcoding array size into loop
condition and remove unused last item of rtl8225z2_rxgain[]

Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: Removed unused arrays in r8180_rtl8225z2.c

Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: Removed non-existent function headers from r8180.h

Cleaned up r8180.h header file by removing headers of functions that
don't exist

Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: Fixed typo in TransmitConfig

Fixed typo in TransmitConfig and removed always false condition

Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: Removed unused parameters of HwHSSIThreeWire()

Removed two parameters of HwHSSIThreeWire() that are equal in all
function calls, fixed return type, fixed register width and simplified
code

Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: Removed dead code

Removed some unused functions, arrays and #define in r8180_core.c

Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: Removed unused module parameters and fixed module description

Removed confusing and unimplemented module parameters and fix NIC name
in module description

Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: Fixed oops when rmmoding

Don't remove procfs entry that is never created

Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: Simplified function GetSupportedWirelessMode8185()

Removed unnecessary variable in GetSupportedWirelessMode8185() and
shortened its code

Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: Fixed bugs in interrupt handler

Fixed typo in rtl8180_interrupt() and added missing line

Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: Removed empty functions and one-iteration loop

Removed empty functions, their calls and 'do {} while (0)' loop
condition

Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: Removed legacy rtl8225_rf_set_chan()

Removed rtl8225_rf_set_chan() and corresponding arrays, changed its
usage to rtl8225z2_rf_set_chan()

Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8187se: Removed dead functions

Removed stale functions that are never called

Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: bcm: Add two products and remove an existing product.

This patch adds two new products and modifies
the device id table to include them. In addition,
product of 0xbccd - BCM_USB_PRODUCT_ID_SM250 is
removed because Beceem, ZTE, Sprint use this id
for block devices.

Reported-by: Muhammad Minhazul Haque <mdminhazulhaque@gmail.com>
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fwserial: Add TTY-over-Firewire serial driver

This patch provides the kernel driver for high-speed TTY
communication over the IEEE 1394 bus.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1032: check shared interrupt

In the interrupt service routine, check the device is asserting the
shared interrupt line and check that interrupts have been enabled.

When attaching the device, disable interrupts before setting up the
interrupt handler to avoid handling spurious interrupts before the
device is ready.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxfast: remove unused variable in usbduxfastsub_ai_Irq()

The variable 'p' is initialized but never used otherwise, so
remove the unused variable.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: drivers: jr3_pci.c: fix for coding style issue

fixed few error and warning messages as reported by checkpatch.pl

Signed-off-by: Kumar Amit Mehta <gmate.amit@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_common.c: fix the test for the PCI bars

Commit: 0fcdafb83b9b4e5c48410b3ca91b1f237ad60dbc
staging: comedi: addi-data: cleanup reading of the PCI bars

Changed this test before reading the PCI bars:

if ((this_board->pc_EepromChip == NULL)
|| (strcmp(this_board->pc_EepromChip, ADDIDATA_9054) != 0)) {

to this:

if (!this_board->pc_EepromChip ||
    !strcmp(this_board->pc_EepromChip, ADDIDATA_9054)) {

I just noticed that the strcmp test is wrong.

This fixes the test and adds a comment for it.

This error "broke" the addi-data drivers but they are broken anyway
since they don't follow the comedi core API.

The addi_apci_1032 driver has been converted to follow the comedi core
API. This error effects that driver since the iobase for it should be
found in PCI bar 1 not 2. This fixes that also.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_*: use auto_attach instead of attach_pci

Change the remaining addi-data drivers so they attach using the generic
'auto_attach' method instead the pci specific 'attach_pci' method. The
'attach_pci' is deprecated and is going to be removed.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi-data: use auto_attach instead of attach_pci

Change the addi-data drivers that use the "common" code so they
attach using the generic 'auto_attach' method instead the pci
specific 'attach_pci' method. The 'attach_pci' is deprecated and
is going to be removed.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1500: fix digital input 'insn_bits' function

This driver does not follow the comedi API. The digital input 'insn_bits'
function is supposed to return the status of all the input channels in
data[1]. Currently this function returns the status in data[0].

Fix the function so it works like the comedi core expects.

The 'insn_read' and 'insn_Write' functions for the digital input subdevice
cannot be removed yet. This driver is again abusing the API and uses these
functions to initialize the board and start/stop "events" generated by the
board. These will be addressed later.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1516: remove i_APCI1516_ConfigDigitalOutput()

The digital outputs of the board supported by this driver are not
configurable. This driver abuses the comedi API and uses the 'insn_config'
function of the digital output subdevice to enable/disable writing to
the eeprom on the board. Remove this function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1516: fix digital output 'insn_bits' function

This driver does not follow the comedi API. The digital output 'insn_bits'
function is passed a mask value in data[0] indicating which output bits in
data[1] are changing. The function is then supposed to update the outputs
accordingly and then return the current state of the outputs in data[1].

Currently this driver uses the 'insn_write' function to update either a
single or all the output channels. And it uses the 'insn_bits' function
to read either a single or all the output channel states.

Fix the 'insn_bits' function so it works like the comedi core expects. The
core can then use the function to emulate the 'insn_read' and 'insn_write'
functions for individual channels.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1516: fix digital input 'insn_bits' function

This driver does not follow the comedi API. The digital input 'insn_bits'
function is supposed to return the status of all the input channels in
data[1]. Currently this function returns the status in data[0].

Fix the function so it works like the comedi core expects. The core can
then use the function to emulate the 'insn_read' function for individual
channels.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1564: fix digital output 'insn_bits' function

This driver does not follow the comedi API. The digital output 'insn_bits'
function is passed a mask value in data[0] indicating which output bits in
data[1] are changing. The function is then supposed to update the outputs
accordingly and then return the current state of the outputs in data[1].

Currently this driver uses the 'insn_write' function to update either a
single or all the output channels. And it uses the 'insn_bits' function
to read either a single or all the output channel states.

Fix the 'insn_bits' function so it works like the comedi core expects. The
core can then use the function to emulate the 'insn_read' and 'insn_write'
functions for individual channels.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_1564: fix digital input 'insn_bits' function

This driver does not follow the comedi API. The digital input 'insn_bits'
function is supposed to return the status of all the input channels in
data[1]. Currently this function returns the status in data[0].

Fix the function so it works like the comedi core expects. The core can
then use the function to emulate the 'insn_read' function for individual
channels.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_2016: remove i_APCI2016_ConfigDigitalOutput()

The digital outputs of the board supported by this driver are not
configurable. This driver abuses the comedi API and uses the 'insn_config'
function of the digital output subdevice to enable/disable writing to
the eeprom on the board. Remove this function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_2016: fix digital output 'insn_bits' function

This driver does not follow the comedi API. The digital output 'insn_bits'
function is passed a mask value in data[0] indicating which output bits in
data[1] are changing. The function is then supposed to update the outputs
accordingly and then return the current state of the outputs in data[1].

Currently this driver uses the 'insn_write' function to update either a
single or all the output channels. And it uses the 'insn_bits' function
to read either a single or all the output channel states.

Fix the 'insn_bits' function so it works like the comedi core expects. The
core can then use the function to emulate the 'insn_read' and 'insn_write'
functions for individual channels.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_2032: fix digital output 'insn_bits' function

This driver does not follow the comedi API. The digital output 'insn_bits'
function is passed a mask value in data[0] indicating which output bits in
data[1] are changing. The function is then supposed to update the outputs
accordingly and then return the current state of the outputs in data[1].

Currently this driver uses the 'insn_write' function to update either a
single or all the output channels. And it uses the 'insn_bits' function
to read either a single or all the output channel states.

Fix the 'insn_bits' function so it works like the comedi core expects. The
core can then use the function to emulate the 'insn_read' and 'insn_write'
functions for individual channels.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_2200: remove i_APCI2200_ConfigDigitalOutput()

The digital outputs of the board supported by this driver are not
configurable. This driver abuses the comedi API and uses the 'insn_config'
function of the digital output subdevice to enable/disable writing to
the eeprom on the board. Remove this function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_2200: fix digital output 'insn_bits' function

This driver does not follow the comedi API. The digital output 'insn_bits'
function is passed a mask value in data[0] indicating which output bits in
data[1] are changing. The function is then supposed to update the outputs
accordingly and then return the current state of the outputs in data[1].

Currently this driver uses the 'insn_write' function to update either a
single or all the output channels. And it uses the 'insn_bits' function
to read either a single or all the output channel states.

Fix the 'insn_bits' function so it works like the comedi core expects. The
core can then use the function to emulate the 'insn_read' and 'insn_write'
functions for individual channels.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_2200: fix digital input 'insn_bits' function

This driver does not follow the comedi API. The digital input 'insn_bits'
function is supposed to return the status of all the input channels in
data[1]. Currently this function returns the status in data[0].

Fix the function so it works like the comedi core expects. The core can
then use the function to emulate the 'insn_read' function for individual
channels.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3120: remove i_APCI3120_InsnConfigDigitalOutput()

The digital outputs of the board supported by this driver are not
configurable. This driver abuses the comedi API and uses the 'insn_config'
function of the digital output subdevice to enable/disable writing to
the eeprom on the board. Remove this function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3120: fix digital output 'insn_bits' function

This driver does not follow the comedi API. The digital output 'insn_bits'
function is passed a mask value in data[0] indicating which output bits in
data[1] are changing. The function is then supposed to update the outputs
accordingly and then return the current state of the outputs in data[1].

Currently this driver uses the 'insn_write' function to update either a
single or all the output channels. And it uses the 'insn_bits' function
to read either a single or all the output channel states.

Fix the 'insn_bits' function so it works like the comedi core expects. The
core can then use the function to emulate the 'insn_read' and 'insn_write'
functions for individual channels.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3120: fix digital input 'insn_bits' function

This driver does not follow the comedi API. The digital input 'insn_bits'
function is supposed to return the status of all the input channels in
data[1]. Currently this function returns the status in data[0].

Fix the function so it works like the comedi core expects. The core can
then use the function to emulate the 'insn_read' function for individual
channels.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3200: remove i_APCI3200_ConfigDigitalOutput()

The digital outputs of the board supported by this driver are not
configurable. This driver abuses the comedi API and uses the 'insn_config'
function of the digital output subdevice to enable/disable writing to
the eeprom on the board. Remove this function.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3200: fix digital output 'insn_bits' function

This driver does not follow the comedi API. The digital output 'insn_bits'
function is passed a mask value in data[0] indicating which output bits in
data[1] are changing. The function is then supposed to update the outputs
accordingly and then return the current state of the outputs in data[1].

Currently this driver uses the 'insn_write' function to update either a
single or all the output channels. And it uses the 'insn_bits' function
to read either a single or all the output channel states.

Fix the 'insn_bits' function so it works like the comedi core expects. The
core can then use the function to emulate the 'insn_read' and 'insn_write'
functions for individual channels.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3200: fix digital input 'insn_bits' function

This driver does not follow the comedi API. The digital input 'insn_bits'
function is supposed to return the status of all the input channels in
data[1]. Currently this function uses the data[0] parameter to determine
if a single channel or all thei nput channels are being read. The status
is then being returned in data[0].

Fix the function so it works like the comedi core expects. The core can
then use the function to emulate the 'insn_read' function for individual
channels.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3200: merge addi_apci_3300 support

The addi_apci_3200 and addi_apci_3300 board share the same low-level
hardware code. Merge the drivers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: addi_apci_3xxx: fix digital output 'insn_bits' function

This driver does not follow the comedi API. The digital output 'insn_bits'
function is passed a mask value in data[0] indicating which output bits in
data[1] are changing. The function is then supposed to update the outputs
accordingly and then return the current state of the outputs in data[1].

Fix the 'insn_bits' function so it works like the comedi core expects. The
core can then use the function to emulate the 'insn_read' and 'insn_write'
functions for individual channels.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>