From: Christian Schoenebeck Date: Sun, 7 Feb 2016 20:52:02 +0000 (+0100) Subject: privoxy: bump to version 3.0.24 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=refs%2Fpull%2F2358%2Fhead;p=feed%2Fpackages.git privoxy: bump to version 3.0.24 * upstream to Privoxy 3.0.24 * add facility to set compile options * add file list to be saved on sysupgrade * fixed PKG_MAINTAINER string * add port 8118 used by privoxy to /etc/services * new "boot_delay" option (default 10 seconds) to wait for interfaces to come up before hotplug restarts are enabled Signed-off-by: Christian Schoenebeck --- diff --git a/net/privoxy/Config.in b/net/privoxy/Config.in new file mode 100644 index 0000000000..b4a629d586 --- /dev/null +++ b/net/privoxy/Config.in @@ -0,0 +1,115 @@ +if PACKAGE_privoxy + + comment "Shared libraries settings" + + config PRIVOXY_disable-pthread + bool "Don't use POSIX libpthread (-5489b)" + default n + + config PRIVOXY_disable-dynamic-pcre + bool "Use the built-in, static pcre, even if libpcre is available (+25669b)" + default n + + config PRIVOXY_disable-zlib + bool "Don't use zlib to decompress data before filtering. (-1336b)" + default n + + comment "Config options. Overwrites/ignore configuration file settings" + + config PRIVOXY_disable-toggle + bool "Don't support temporary disable (+2797b)" + default n + + config PRIVOXY_disable-force + bool "Don't allow single-page disable (-434b)" + default n + + config PRIVOXY_disable-fast-redirects + bool "Don't support fast redirects (-1393b)" + default n + + config PRIVOXY_disable-stats + bool "Don't keep statistics (+2870b)" + default n + + config PRIVOXY_enable-ie-images + bool "Enable MS IE image handling. !Read help! (+2694b)" + help + Enable a quick but not always reliable auto-detect whether + requests from MS Internet Explorer are for an image or not. + default n + + config PRIVOXY_disable-image-blocking + bool "Don't check for image request - assume HTML (-655b)" + help + Don't try to figure out whether a request is + for an image or HTML - assume HTML. + default n + + config PRIVOXY_disable-acl-support + bool "Disable ACL access control (-3496b)" + help + Prevents the use of ACLs to control access to Privoxy by IP address. + default n + + config PRIVOXY_disable-trust-files + bool "Prevents the use of trust files. (-1302b)" + default n + + config PRIVOXY_disable-editor + bool "Disable web-based editor. !Read help! (-44979b)" + help + Prevents the use of the web-based actions file + editor and web-based temporary disable setting. + default n + + config PRIVOXY_enable-no-gifs + bool "Use politically correct PNG format. !Read help! (+112b)" + help + Use politically correct PNG format instead of GIF + for built-in images. May not work with all browsers. + default n + + config PRIVOXY_enable-graceful-termination + bool "Allow to shutdown Privoxy through the webinterface. (+1685b)" + default n + + config PRIVOXY_enable-extended-host-patterns + bool "Enable and require PCRE syntax in host patterns. !Read help! (-1329b)" + help + Enable and require PCRE syntax in host patterns. This feature hasn't + been announced yet and it's not clear if it's a good idea. It's expected + to work, but undocumented. You should only enable it if you know what + PCRE is and are sure that you need it for your host patterns. You can + use tools/url-pattern-translator.pl to convert existing action files to + use PCRE host patterns. Please don't enable this option when creating + packages for others that may not be expecting it. + default n + + config PRIVOXY_enable-external-filters + bool "Allow to filter content with scripts and programs. Experimental. (+4821b)" + default n + + config PRIVOXY_enable-accept-filter + bool "Try to use accf_http(9) if supported. (+-0b)" + default n + + config PRIVOXY_enable-strptime-sanity-checks + bool "Only trust strptime() results if ... !Read help! (+407b)" + help + Only trust strptime() results if an additional strftime()/strptime() + conversion doesn't change the result. Can be useful if strptime() is + known or suspected to be broken. + default n + + config PRIVOXY_enable-compression + bool "Allow Privoxy to compress buffered content. (+1275b)" + help + Allow Privoxy to compress buffered content + if the client supports it. Requires zlib support. + depends on !PRIVOXY_no_zlib + default n + + +endif + \ No newline at end of file diff --git a/net/privoxy/Makefile b/net/privoxy/Makefile index 8c5ca2c87e..a51b36f94c 100644 --- a/net/privoxy/Makefile +++ b/net/privoxy/Makefile @@ -1,5 +1,5 @@ # -# Copyright (C) 2006-2015 OpenWrt.org +# Copyright (C) 2006-2016 OpenWrt.org # # This is free software, licensed under the GNU General Public License v2. # See /LICENSE for more information. @@ -8,12 +8,12 @@ include $(TOPDIR)/rules.mk PKG_NAME:=privoxy -PKG_VERSION:=3.0.23 -PKG_RELEASE:=4 +PKG_VERSION:=3.0.24 +PKG_RELEASE:=1 PKG_SOURCE:=privoxy-$(PKG_VERSION)-stable-src.tar.gz PKG_SOURCE_URL:=@SF/ijbswa -PKG_MD5SUM:=bbe47d5ff1a54d9f9fc93a160532697f +PKG_MD5SUM:=44a47d1a5000db8cccd61ace0e25e7f7 PKG_BUILD_DIR:=$(BUILD_DIR)/privoxy-$(PKG_VERSION)-stable PKG_FIXUP:=autoreconf PKG_INSTALL:=1 @@ -21,7 +21,31 @@ PKG_INSTALL:=1 PKG_LICENSE:=GPL-2.0 PKG_LICENSE_FILES:=LICENSE -PKG_MAINTAINER:=christian.schoenebeck@gmail.com +PKG_MAINTAINER:=Christian Schoenebeck + +PKG_CONFIG_DEPENDS:= \ + CONFIG_IPV6 \ + \ + CONFIG_PRIVOXY_disable-pthread \ + CONFIG_PRIVOXY_disable-dynamic-pcre \ + CONFIG_PRIVOXY_disable-zlib \ + \ + CONFIG_PRIVOXY_disable-toggle \ + CONFIG_PRIVOXY_disable-force \ + CONFIG_PRIVOXY_disable-fast-redirects \ + CONFIG_PRIVOXY_disable-stats \ + CONFIG_PRIVOXY_enable-ie-images \ + CONFIG_PRIVOXY_disable-image-blocking \ + CONFIG_PRIVOXY_disable-acl-support \ + CONFIG_PRIVOXY_disable-trust-files \ + CONFIG_PRIVOXY_disable-editor \ + CONFIG_PRIVOXY_enable-no-gifs \ + CONFIG_PRIVOXY_enable-graceful-termination \ + CONFIG_PRIVOXY_enable-extended-host-patterns \ + CONFIG_PRIVOXY_enable-external-filters \ + CONFIG_PRIVOXY_enable-accept-filter \ + CONFIG_PRIVOXY_enable-strptime-sanity-checks \ + CONFIG_PRIVOXY_enable-compression include $(INCLUDE_DIR)/package.mk @@ -29,10 +53,11 @@ define Package/$(PKG_NAME) SECTION:=net CATEGORY:=Network SUBMENU:=Web Servers/Proxies - DEPENDS:=+libpcre +libpthread +zlib TITLE:=Privoxy WEB Proxy URL:=http://www.privoxy.org/ USERID:=privoxy=8118:privoxy=8118 + MENU:=1 + DEPENDS:=+!PRIVOXY_no_pcre:libpcre +!PRIVOXY_no_pthread:libpthread +!PRIVOXY_no_zlib:zlib endef # shown in LuCI package description @@ -42,23 +67,45 @@ endef # shown in make menuconfig define Package/$(PKG_NAME)/config -help - Privoxy is a web proxy with advanced filtering capabilities for protecting - privacy, modifying web page content, managing cookies, controlling access, - and removing ads, banners, pop-ups and other obnoxious Internet junk. - Privoxy has a very flexible configuration and can be customized to suit - individual needs and tastes. - Privoxy has application for both stand-alone systems and multi-user networks. - - Run as : $(USERID) - Version: $(PKG_VERSION)-$(PKG_RELEASE) - Home : $(URL) - - $(PKG_MAINTAINER) + help + Privoxy is a web proxy with advanced filtering capabilities for protecting + privacy, modifying web page content, managing cookies, controlling access, + and removing ads, banners, pop-ups and other obnoxious Internet junk. + Privoxy has a very flexible configuration and can be customized to suit + individual needs and tastes. + Privoxy has application for both stand-alone systems and multi-user networks. + Run as : $(USERID) + Version: $(PKG_VERSION)-$(PKG_RELEASE) + Home : $(URL) + $(PKG_MAINTAINER) + + source "$(SOURCE)/Config.in" endef CONFIGURE_ARGS += \ - --sysconfdir=/etc/privoxy + --sysconfdir=/etc/privoxy \ + $(if $(CONFIG_IPV6),,--disable-ipv6-support) \ + \ + $(if $(CONFIG_PRIVOXY_disable-pthread),--disable-pthread) \ + $(if $(CONFIG_PRIVOXY_disable-dynamic-pcre),--disable-dynamic-pcre) \ + $(if $(CONFIG_PRIVOXY_disable-zlib),--disable-zlib) \ + \ + $(if $(CONFIG_PRIVOXY_disable-toggle),--disable-toggle) \ + $(if $(CONFIG_PRIVOXY_disable-force),--disable-force) \ + $(if $(CONFIG_PRIVOXY_disable-fast-redirects),--disable-fast-redirects) \ + $(if $(CONFIG_PRIVOXY_disable-stats),--disable-stats) \ + $(if $(CONFIG_PRIVOXY_enable-ie-images),--enable-ie-images) \ + $(if $(CONFIG_PRIVOXY_disable-image-blocking),--disable-image-blocking) \ + $(if $(CONFIG_PRIVOXY_disable-acl-support),--disable-acl-support) \ + $(if $(CONFIG_PRIVOXY_disable-trust-files),--disable-trust-files) \ + $(if $(CONFIG_PRIVOXY_disable-editor),--disable-editor) \ + $(if $(CONFIG_PRIVOXY_enable-no-gifs),--enable-no-gifs) \ + $(if $(CONFIG_PRIVOXY_enable-graceful-termination),--enable-graceful-termination) \ + $(if $(CONFIG_PRIVOXY_enable-extended-host-patterns),--enable-extended-host-patterns) \ + $(if $(CONFIG_PRIVOXY_enable-external-filters),--enable-external-filters) \ + $(if $(CONFIG_PRIVOXY_enable-accept-filter),--enable-accept-filter) \ + $(if $(CONFIG_PRIVOXY_enable-strptime-sanity-checks),--enable-strptime-sanity-checks) \ + $(if $(CONFIG_PRIVOXY_enable-compression),--enable-compression) # needed otherwise errors during compile MAKE_FLAGS:= @@ -98,12 +145,20 @@ define Package/$(PKG_NAME)/install -exec install -m0664 -t $(1)/etc/privoxy {} \; $(INSTALL_DIR) \ + $(1)/lib/upgrade/keep.d \ $(1)/etc/init.d \ $(1)/etc/hotplug.d/iface \ $(1)/etc/config + $(INSTALL_DATA) ./files/privoxy.upgrade $(1)/lib/upgrade/keep.d/privoxy $(INSTALL_BIN) ./files/privoxy.init $(1)/etc/init.d/privoxy $(INSTALL_BIN) ./files/privoxy.hotplug $(1)/etc/hotplug.d/iface/80-privoxy $(INSTALL_CONF) ./files/privoxy.config $(1)/etc/config/privoxy endef +define Package/$(PKG_NAME)/postinst + #!/bin/sh + grep -i privoxy $${IPKG_INSTROOT}/etc/services >/dev/null 2>&1 || \ + echo -e "privoxy\t8118" >> $${IPKG_INSTROOT}/etc/services +endef + $(eval $(call BuildPackage,$(PKG_NAME))) diff --git a/net/privoxy/files/privoxy.hotplug b/net/privoxy/files/privoxy.hotplug index bd668017f0..2673b20504 100644 --- a/net/privoxy/files/privoxy.hotplug +++ b/net/privoxy/files/privoxy.hotplug @@ -2,6 +2,8 @@ # only (re-)start on ifup [ "$ACTION" = "ifup" ] || exit 0 +# only start if boot_delay is done +[ -f /tmp/privoxy.hotplug ] || exit 0 PIDFILE=/var/run/privoxy.pid diff --git a/net/privoxy/files/privoxy.init b/net/privoxy/files/privoxy.init index 96660dd5d7..124fb858d4 100644 --- a/net/privoxy/files/privoxy.init +++ b/net/privoxy/files/privoxy.init @@ -50,6 +50,17 @@ _uci2conf() { echo '### SEE /etc/config/privoxy INSTEAD' >> $CFGTEMP echo '' >> $CFGTEMP + # logdir and logfile + # privoxy needs read/write access + _LOGDIR=$(uci -q get privoxy.privoxy.logdir) || _LOGDIR="/var/log" + _LOGFILE=$(uci -q get privoxy.privoxy.logfile) || _LOGFILE="privoxy.log" + mkdir -m0755 -p $_LOGDIR + touch $_LOGDIR/$_LOGFILE + chmod 664 $_LOGDIR/$_LOGFILE + chown privoxy:privoxy $_LOGDIR/$_LOGFILE + echo -e "logdir\t$_LOGDIR" >> $CFGTEMP + echo -e "logfile\t$_LOGFILE" >> $CFGTEMP + # confdir # privoxy needs read access (possibly write access) _CONFDIR=$(uci -q get privoxy.privoxy.confdir) || _CONFDIR="/etc/privoxy" @@ -72,17 +83,6 @@ _uci2conf() { echo -e "templdir\t$_TEMPLDIR" >> $CFGTEMP fi - # logdir and logfile - # privoxy needs read/write access - _LOGDIR=$(uci -q get privoxy.privoxy.logdir) || _LOGDIR="/var/log" - _LOGFILE=$(uci -q get privoxy.privoxy.logfile) || _LOGFILE="privoxy.log" - mkdir -m0755 -p $_LOGDIR - touch $_LOGDIR/$_LOGFILE - chmod 664 $_LOGDIR/$_LOGFILE - chown privoxy:privoxy $_LOGDIR/$_LOGFILE - echo -e "logdir\t$_LOGDIR" >> $CFGTEMP - echo -e "logfile\t$_LOGFILE" >> $CFGTEMP - # temporary-directory # privoxy needs read/write access _TMP_DIR=$(uci -q get privoxy.privoxy.temporary_directory) # no default needed @@ -100,7 +100,25 @@ _uci2conf() { } boot() { - return 0 # will be started by "iface" hotplug events + # wait a given time (default 10 seconds) before startup + # to wait for interfaces to come up / not using hotplug events during boot + _start() { + [ $1 -gt 0 ] && { + logger -p daemon.info -t "privoxy[]" "Scheduled startup in $1 seconds" + sleep $1 + } + start + } + + local _DELAY + _DELAY=$(uci_get "privoxy" "system" "boot_delay" "10") + _start $_DELAY & + return 0 +} + +shutdown() { + rm -f /tmp/privoxy.hotplug + stop } start() { @@ -110,6 +128,7 @@ start() { _uci2conf /usr/sbin/privoxy --pidfile $PIDFILE --user privoxy.privoxy $CFGFILE + touch /tmp/privoxy.hotplug # verify startup _PID=$(cat $PIDFILE 2>/dev/null) @@ -117,7 +136,7 @@ start() { local _ERR=$? [ $_ERR -eq 0 ] \ && logger -p daemon.notice -t "privoxy[$_PID]" "Started successfully"\ - || logger -p daemon.warn -t "privoxy[-----]" "Failed to start" + || logger -p daemon.warn -t "privoxy[]" "Failed to start" return $_ERR } @@ -144,7 +163,7 @@ stop() { logger -p daemon.notice -t "privoxy[$_PID]" "Shutdown successfully" else kill -9 $_tmp # Normally never come here - logger -p daemon.warn -t "privoxy[-----]" "Shutdown forced by KILL" + logger -p daemon.warn -t "privoxy[$_tmp]" "Shutdown forced by KILL" fi return 0 } diff --git a/net/privoxy/files/privoxy.upgrade b/net/privoxy/files/privoxy.upgrade new file mode 100644 index 0000000000..ef198a278c --- /dev/null +++ b/net/privoxy/files/privoxy.upgrade @@ -0,0 +1,4 @@ +/etc/config/privoxy +/etc/privoxy/user.action +/etc/privoxy/user.filter +/etc/privoxy/user.trust