From: Sungbo Eo <mans0n@gorani.run>
Date: Sun, 10 Mar 2024 04:55:24 +0000 (+0900)
Subject: ramips: improve support for STORYLiNK SAP-G3200U3
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=refs%2Fheads%2Fmaster;p=openwrt%2Fstaging%2Fmans0n.git

ramips: improve support for STORYLiNK SAP-G3200U3

* Increase flash SPI frequency to 50MHz

  The maximum SPI frequency of MX25L6406EM2I is 86 MHz,
  but in this patch 50 MHz was chosen as a safe value.

* Update Ethernet MAC addresses

  Till now LAN/WAN MAC addresses were flipped
  compared to stock firmware.

* Fix Wi-Fi LEDs by adding mt76 led nodes

* Fix LAN port order

  LAN ports are in reverse order of switch ports.

* Fix the well-known "LZMA ERROR 1" error by using lzma-loader

* Set uImage name, which enables installation via stock web interface:

  1.  Upload **initramfs** image file to the web page.
  2.  Boot into OpenWrt and perform sysupgrade with sysupgrade image.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
---

diff --git a/target/linux/ramips/dts/mt7621_storylink_sap-g3200u3.dts b/target/linux/ramips/dts/mt7621_storylink_sap-g3200u3.dts
index 7b89ee6727..3448db5f03 100644
--- a/target/linux/ramips/dts/mt7621_storylink_sap-g3200u3.dts
+++ b/target/linux/ramips/dts/mt7621_storylink_sap-g3200u3.dts
@@ -43,7 +43,8 @@
 	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		spi-max-frequency = <10000000>;
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
 
 		partitions {
 			compatible = "fixed-partitions";
@@ -86,10 +87,12 @@
 						reg = <0x8000 0x200>;
 					};
 
+					macaddr_factory_e000: macaddr@e000 {
+						reg = <0xe000 0x6>;
+					};
+
 					macaddr_factory_e006: macaddr@e006 {
-						compatible = "mac-base";
 						reg = <0xe006 0x6>;
-						#nvmem-cell-cells = <1>;
 					};
 				};
 			};
@@ -108,25 +111,37 @@
 };
 
 &pcie0 {
-	mt76@0,0 {
+	wifi@0,0 {
+		compatible = "mediatek,mt76";
 		reg = <0x0000 0 0 0 0>;
 		nvmem-cells = <&eeprom_factory_8000>;
 		nvmem-cell-names = "eeprom";
 		ieee80211-freq-limit = <5000000 6000000>;
+
+		led {
+			led-sources = <2>;
+			led-active-low;
+		};
 	};
 };
 
 &pcie1 {
-	mt76@0,0 {
+	wifi@0,0 {
+		compatible = "mediatek,mt76";
 		reg = <0x0000 0 0 0 0>;
 		nvmem-cells = <&eeprom_factory_0>;
 		nvmem-cell-names = "eeprom";
 		ieee80211-freq-limit = <2400000 2500000>;
+
+		led {
+			led-sources = <2>;
+			led-active-low;
+		};
 	};
 };
 
 &gmac0 {
-	nvmem-cells = <&macaddr_factory_e006 0>;
+	nvmem-cells = <&macaddr_factory_e000>;
 	nvmem-cell-names = "mac-address";
 };
 
@@ -135,7 +150,7 @@
 	label = "wan";
 	phy-handle = <&ethphy4>;
 
-	nvmem-cells = <&macaddr_factory_e006 1>;
+	nvmem-cells = <&macaddr_factory_e006>;
 	nvmem-cell-names = "mac-address";
 };
 
@@ -149,22 +164,22 @@
 	ports {
 		port@0 {
 			status = "okay";
-			label = "lan1";
+			label = "lan4";
 		};
 
 		port@1 {
 			status = "okay";
-			label = "lan2";
+			label = "lan3";
 		};
 
 		port@2 {
 			status = "okay";
-			label = "lan3";
+			label = "lan2";
 		};
 
 		port@3 {
 			status = "okay";
-			label = "lan4";
+			label = "lan1";
 		};
 	};
 };
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 2ab687fd02..a46ea39d59 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -2190,7 +2190,9 @@ TARGET_DEVICES += snr_snr-cpe-me2-sfp
 
 define Device/storylink_sap-g3200u3
   $(Device/dsa-migration)
+  $(Device/uimage-lzma-loader)
   IMAGE_SIZE := 7872k
+  UIMAGE_NAME := SAP-G3200
   DEVICE_VENDOR := STORYLiNK
   DEVICE_MODEL := SAP-G3200U3
   DEVICE_PACKAGES := kmod-mt76x2 kmod-usb3 kmod-usb-ledtrig-usbport \