From: Peter Meerwald Date: Mon, 2 Jul 2012 03:19:03 +0000 (+0000) Subject: beagle: make get_expansion_id(), get_board_revision(), beagle_display_init() static X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=fff1a57208091f06fff57684c024390b1efd314e;p=project%2Fbcm63xx%2Fu-boot.git beagle: make get_expansion_id(), get_board_revision(), beagle_display_init() static Signed-off-by: Peter Meerwald --- diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c index 2ef22900d7..2214b7fcb6 100644 --- a/board/ti/beagle/beagle.c +++ b/board/ti/beagle/beagle.c @@ -112,7 +112,7 @@ int board_init(void) * GPIO173, GPIO172, GPIO171: 1 0 1 => C4 * GPIO173, GPIO172, GPIO171: 0 0 0 => xM */ -int get_board_revision(void) +static int get_board_revision(void) { int revision; @@ -211,7 +211,7 @@ void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl, * bus 1 for the availability of an AT24C01B serial EEPROM. * returns the device_vendor field from the EEPROM */ -unsigned int get_expansion_id(void) +static unsigned int get_expansion_id(void) { i2c_set_bus_num(EXPANSION_EEPROM_I2C_BUS); @@ -234,7 +234,7 @@ unsigned int get_expansion_id(void) * Configure DSS to display background color on DVID * Configure VENC to display color bar on S-Video */ -void beagle_display_init(void) +static void beagle_display_init(void) { omap3_dss_venc_config(&venc_config_std_tv, VENC_HEIGHT, VENC_WIDTH); switch (get_board_revision()) {