From: John Crispin <john@openwrt.org>
Date: Mon, 1 Jun 2015 20:11:35 +0000 (+0000)
Subject: ipq806x: move stmmac support in the kernel binary
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ff324050c3fa186c7e05a8489b0b1074d6fbdf88;p=openwrt%2Fstaging%2Fluka.git

ipq806x: move stmmac support in the kernel binary

Ethernet GMAC is built-in the SoC, so there is no need to enable it as a
module. We'll just assume we need it. That's what is done for other
platform where this driver is used so it'll make things more consistent.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45871
---

diff --git a/target/linux/ipq806x/Makefile b/target/linux/ipq806x/Makefile
index da841a6314..b6ddfe26b9 100644
--- a/target/linux/ipq806x/Makefile
+++ b/target/linux/ipq806x/Makefile
@@ -15,7 +15,7 @@ KERNELNAME:=zImage Image dtbs
 
 include $(INCLUDE_DIR)/target.mk
 DEFAULT_PACKAGES += \
-	kmod-leds-gpio kmod-gpio-button-hotplug kmod-stmmac swconfig \
+	kmod-leds-gpio kmod-gpio-button-hotplug swconfig \
 	kmod-ata-core kmod-ata-ahci kmod-ata-ahci-platform
 
 
diff --git a/target/linux/ipq806x/config-3.18 b/target/linux/ipq806x/config-3.18
index 396c6e3147..4d3b884dca 100644
--- a/target/linux/ipq806x/config-3.18
+++ b/target/linux/ipq806x/config-3.18
@@ -121,6 +121,7 @@ CONFIG_DMA_ENGINE=y
 CONFIG_DMA_OF=y
 CONFIG_DMA_VIRTUAL_CHANNELS=y
 CONFIG_DTC=y
+CONFIG_DWMAC_IPQ806X=y
 # CONFIG_DW_DMAC_CORE is not set
 # CONFIG_DW_DMAC_PCI is not set
 CONFIG_DYNAMIC_DEBUG=y
@@ -212,7 +213,6 @@ CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_COMPAT=y
 CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_QUP=y
-# CONFIG_IEEE802154 is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_INITRAMFS_SOURCE=""
@@ -243,7 +243,6 @@ CONFIG_MFD_SYSCON=y
 CONFIG_MIGHT_HAVE_CACHE_L2X0=y
 CONFIG_MIGHT_HAVE_PCI=y
 CONFIG_MIGRATION=y
-# CONFIG_MMC_SDHCI_MSM is not set
 CONFIG_MODULES_USE_ELF_REL=y
 CONFIG_MSM_GCC_8660=y
 CONFIG_MSM_GCC_8960=y
@@ -261,6 +260,7 @@ CONFIG_MUTEX_SPIN_ON_OWNER=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEON=y
 CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NET_PTP_CLASSIFY=y
 CONFIG_NET_VENDOR_WIZNET=y
 CONFIG_NO_BOOTMEM=y
 CONFIG_NO_HZ=y
@@ -319,12 +319,14 @@ CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_MSM=y
 # CONFIG_POWER_RESET_SYSCON is not set
 CONFIG_POWER_SUPPLY=y
+CONFIG_PPS=y
 CONFIG_PREEMPT=y
 CONFIG_PREEMPT_COUNT=y
 # CONFIG_PREEMPT_NONE is not set
 CONFIG_PREEMPT_RCU=y
 CONFIG_PRINTK_TIME=y
 CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_PTP_1588_CLOCK=y
 CONFIG_QCOM_BAM_DMA=y
 CONFIG_QCOM_GSBI=y
 CONFIG_QCOM_HFPLL=y
@@ -366,6 +368,10 @@ CONFIG_SPI_MASTER=y
 CONFIG_SPI_QUP=y
 CONFIG_SPMI=y
 CONFIG_SPMI_MSM_PMIC_ARB=y
+# CONFIG_STMMAC_DA is not set
+CONFIG_STMMAC_DEBUG_FS=y
+CONFIG_STMMAC_ETH=y
+CONFIG_STMMAC_PLATFORM=y
 CONFIG_STOP_MACHINE=y
 # CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_SUSPEND=y