From: Daniel Dickinson <crazycshore@gmail.com>
Date: Sun, 28 Nov 2010 22:04:26 +0000 (+0000)
Subject: bcm63xx: Don't hardcode the switch ethernet interface in preinit.
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=fec30c8c80c9c01b8b37332beb8639b2806d9c1c;p=openwrt%2Fstaging%2Fstintel.git

bcm63xx: Don't hardcode the switch ethernet interface in preinit.

Currently eth1 is hardcoded as the expected interface switches in diagmode.
This patch replaces the eth1 with the ifname, and also directly tests if
the interface specified by ifname has a switch attached.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24186
---

diff --git a/target/linux/brcm63xx/base-files/lib/preinit/05_failsafe_config_switch_brcm63xx b/target/linux/brcm63xx/base-files/lib/preinit/05_failsafe_config_switch_brcm63xx
index b9be96eda6..43da8cc068 100644
--- a/target/linux/brcm63xx/base-files/lib/preinit/05_failsafe_config_switch_brcm63xx
+++ b/target/linux/brcm63xx/base-files/lib/preinit/05_failsafe_config_switch_brcm63xx
@@ -1,9 +1,9 @@
 #!/bin/sh
 
 failsafe_ip() {
-	[ -d /proc/switch/eth1 ] && [ "$ifname" = "eth1" ] && {
-		ifconfig eth1 0.0.0.0 down
-		echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth1/vlan/0/ports
+	[ -d "/proc/switch/$ifname" ] && {
+		ifconfig "$ifname" 0.0.0.0 down
+		echo "0 1 2 3 4 ${cpu_port:-5u*}" > "/proc/switch/$ifname/vlan/0/ports"
 	}
 	
 	[ -n "$pi_ifname" ] && grep -q "$pi_ifname" /proc/net/dev && {
diff --git a/target/linux/brcm63xx/base-files/lib/preinit/15_set_preinit_interface_brcm63xx b/target/linux/brcm63xx/base-files/lib/preinit/15_set_preinit_interface_brcm63xx
index 6c7a8a8581..9d366fa339 100644
--- a/target/linux/brcm63xx/base-files/lib/preinit/15_set_preinit_interface_brcm63xx
+++ b/target/linux/brcm63xx/base-files/lib/preinit/15_set_preinit_interface_brcm63xx
@@ -16,9 +16,9 @@ preinit_ip_deconfig() {
 			ifconfig $pi_ifname 0.0.0.0 down
 		}
 	fi
-	[ -d /proc/switch/eth1 ] && [ "$ifname" = "eth1" ] && {
-		echo 1 >/proc/switch/eth1/reset
-		echo "0 1 2 3 4 ${cpu_port:-5u*}" > /proc/switch/eth1/vlan/0/ports
+	[ -d "/proc/switch/$ifname" ] && {
+		echo 1 > "/proc/switch/$ifname/reset"
+		echo "0 1 2 3 4 ${cpu_port:-5u*}" > "/proc/switch/$ifname/vlan/0/ports"
 	}
 
 }
@@ -26,17 +26,17 @@ preinit_ip_deconfig() {
 preinit_net_echo() {
 	preinit_ip
 	
-	[ -d /proc/switch/eth1 ] && [ "$ifname" = "eth1" ] && {
-		echo 1 >/proc/switch/eth1/reset
+	[ -d "/proc/switch/$ifname" ] && {
+		echo 1 > "/proc/switch/$ifname/reset"
 
 		# this would be easier if we blasted the message across all ports
 		# but we don't want packets leaking across interfaces
 		for port in $(seq 0 4); do {
-			echo "$port ${cpu_port:-5u*}" > /proc/switch/eth1/vlan/0/ports
+			echo "$port ${cpu_port:-5u*}" > "/proc/switch/$ifname/vlan/0/ports"
 			port_net_echo $1
 		}; done
 		
-		echo "0 ${cpu_port:-5u*}" > /proc/switch/eth1/vlan/0/ports
+		echo "0 ${cpu_port:-5u*}" > "/proc/switch/$ifname/vlan/0/ports"
 		
 	} || port_net_echo $1
 }