From: Robert Marko Date: Sun, 12 Sep 2021 20:34:43 +0000 (+0200) Subject: ipq40xx: 5.10: replace patches with upstreamed versions X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=fec22cfa59b34efeb2dc00eda15262a2982aa6b4;p=openwrt%2Fstaging%2Fynezz.git ipq40xx: 5.10: replace patches with upstreamed versions USB and SDHCI LDO DTS patches have been upstreamed into 5.12, so replace the local versions with upstreamed ones. Reorder, and clearly mark the kernel version. Signed-off-by: Robert Marko --- diff --git a/target/linux/ipq40xx/patches-5.10/0001-v5.12-ARM-dts-qcom-ipq4019-add-USB-devicetree-nodes.patch b/target/linux/ipq40xx/patches-5.10/0001-v5.12-ARM-dts-qcom-ipq4019-add-USB-devicetree-nodes.patch new file mode 100644 index 0000000000..890611387c --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/0001-v5.12-ARM-dts-qcom-ipq4019-add-USB-devicetree-nodes.patch @@ -0,0 +1,99 @@ +From b8afc254b40167fd37b4d4263e750dab1f9ef157 Mon Sep 17 00:00:00 2001 +From: John Crispin +Date: Wed, 9 Sep 2020 18:38:31 +0200 +Subject: [PATCH] ARM: dts: qcom: ipq4019: add USB devicetree nodes + +Since we now have driver for the USB PHY, and USB controller is already supported by the DWC3 driver lets add the necessary nodes to DTSI. + +Signed-off-by: John Crispin +Signed-off-by: Robert Marko +Cc: Luka Perkov +Reviewed-by: Vinod Koul +Link: https://lore.kernel.org/r/20200909163831.1894142-1-robert.marko@sartura.hr +Signed-off-by: Bjorn Andersson +--- + arch/arm/boot/dts/qcom-ipq4019.dtsi | 74 +++++++++++++++++++++++++++++ + 1 file changed, 74 insertions(+) + +--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi +@@ -605,5 +605,79 @@ + reg = <4>; + }; + }; ++ ++ usb3_ss_phy: ssphy@9a000 { ++ compatible = "qcom,usb-ss-ipq4019-phy"; ++ #phy-cells = <0>; ++ reg = <0x9a000 0x800>; ++ reg-names = "phy_base"; ++ resets = <&gcc USB3_UNIPHY_PHY_ARES>; ++ reset-names = "por_rst"; ++ status = "disabled"; ++ }; ++ ++ usb3_hs_phy: hsphy@a6000 { ++ compatible = "qcom,usb-hs-ipq4019-phy"; ++ #phy-cells = <0>; ++ reg = <0xa6000 0x40>; ++ reg-names = "phy_base"; ++ resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>; ++ reset-names = "por_rst", "srif_rst"; ++ status = "disabled"; ++ }; ++ ++ usb3: usb3@8af8800 { ++ compatible = "qcom,dwc3"; ++ reg = <0x8af8800 0x100>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ clocks = <&gcc GCC_USB3_MASTER_CLK>, ++ <&gcc GCC_USB3_SLEEP_CLK>, ++ <&gcc GCC_USB3_MOCK_UTMI_CLK>; ++ clock-names = "master", "sleep", "mock_utmi"; ++ ranges; ++ status = "disabled"; ++ ++ dwc3@8a00000 { ++ compatible = "snps,dwc3"; ++ reg = <0x8a00000 0xf8000>; ++ interrupts = ; ++ phys = <&usb3_hs_phy>, <&usb3_ss_phy>; ++ phy-names = "usb2-phy", "usb3-phy"; ++ dr_mode = "host"; ++ }; ++ }; ++ ++ usb2_hs_phy: hsphy@a8000 { ++ compatible = "qcom,usb-hs-ipq4019-phy"; ++ #phy-cells = <0>; ++ reg = <0xa8000 0x40>; ++ reg-names = "phy_base"; ++ resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>; ++ reset-names = "por_rst", "srif_rst"; ++ status = "disabled"; ++ }; ++ ++ usb2: usb2@60f8800 { ++ compatible = "qcom,dwc3"; ++ reg = <0x60f8800 0x100>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ clocks = <&gcc GCC_USB2_MASTER_CLK>, ++ <&gcc GCC_USB2_SLEEP_CLK>, ++ <&gcc GCC_USB2_MOCK_UTMI_CLK>; ++ clock-names = "master", "sleep", "mock_utmi"; ++ ranges; ++ status = "disabled"; ++ ++ dwc3@6000000 { ++ compatible = "snps,dwc3"; ++ reg = <0x6000000 0xf8000>; ++ interrupts = ; ++ phys = <&usb2_hs_phy>; ++ phy-names = "usb2-phy"; ++ dr_mode = "host"; ++ }; ++ }; + }; + }; diff --git a/target/linux/ipq40xx/patches-5.10/0002-v5.12-ARM-dts-qcom-ipq4019-add-more-labels.patch b/target/linux/ipq40xx/patches-5.10/0002-v5.12-ARM-dts-qcom-ipq4019-add-more-labels.patch new file mode 100644 index 0000000000..d623a9c7b3 --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/0002-v5.12-ARM-dts-qcom-ipq4019-add-more-labels.patch @@ -0,0 +1,44 @@ +From d1ae4c808e7802008225078d93fbadd4aeea1e2d Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Wed, 9 Sep 2020 21:56:37 +0200 +Subject: [PATCH] ARM: dts: qcom: ipq4019: add more labels + +Lets add labels to more commonly used nodes for easier modification in board DTS files. + +Signed-off-by: Robert Marko +Cc: Luka Perkov +Link: https://lore.kernel.org/r/20200909195640.3127341-2-robert.marko@sartura.hr +Signed-off-by: Bjorn Andersson +--- + arch/arm/boot/dts/qcom-ipq4019.dtsi | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi +@@ -190,7 +190,7 @@ + reg = <0x1800000 0x60000>; + }; + +- rng@22000 { ++ prng: rng@22000 { + compatible = "qcom,prng"; + reg = <0x22000 0x140>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; +@@ -300,7 +300,7 @@ + status = "disabled"; + }; + +- crypto@8e3a000 { ++ crypto: crypto@8e3a000 { + compatible = "qcom,crypto-v5.1"; + reg = <0x08e3a000 0x6000>; + clocks = <&gcc GCC_CRYPTO_AHB_CLK>, +@@ -386,7 +386,7 @@ + dma-names = "rx", "tx"; + }; + +- watchdog@b017000 { ++ watchdog: watchdog@b017000 { + compatible = "qcom,kpss-wdt", "qcom,kpss-wdt-ipq4019"; + reg = <0xb017000 0x40>; + clocks = <&sleep_clk>; diff --git a/target/linux/ipq40xx/patches-5.10/0003-v5.12-ARM-dts-qcom-ipq4019-add-SDHCI-VQMMC-LDO-node.patch b/target/linux/ipq40xx/patches-5.10/0003-v5.12-ARM-dts-qcom-ipq4019-add-SDHCI-VQMMC-LDO-node.patch new file mode 100644 index 0000000000..1d93fb800a --- /dev/null +++ b/target/linux/ipq40xx/patches-5.10/0003-v5.12-ARM-dts-qcom-ipq4019-add-SDHCI-VQMMC-LDO-node.patch @@ -0,0 +1,35 @@ +From e14775aa2feac18e7378cb8009b55c13d4236b50 Mon Sep 17 00:00:00 2001 +From: Robert Marko +Date: Mon, 7 Sep 2020 12:19:37 +0200 +Subject: [PATCH] ARM: dts: qcom: ipq4019: add SDHCI VQMMC LDO node + +Since we now have driver for the SDHCI VQMMC LDO needed +for I/0 voltage levels lets introduce the necessary node for it. + +Signed-off-by: Robert Marko +Cc: Luka Perkov +Link: https://lore.kernel.org/r/20200907101937.10155-1-robert.marko@sartura.hr +Signed-off-by: Bjorn Andersson +--- + arch/arm/boot/dts/qcom-ipq4019.dtsi | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi +@@ -209,6 +209,16 @@ + interrupts = ; + }; + ++ vqmmc: regulator@1948000 { ++ compatible = "qcom,vqmmc-ipq4019-regulator"; ++ reg = <0x01948000 0x4>; ++ regulator-name = "vqmmc"; ++ regulator-min-microvolt = <1500000>; ++ regulator-max-microvolt = <3000000>; ++ regulator-always-on; ++ status = "disabled"; ++ }; ++ + sdhci: sdhci@7824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0x7824900 0x11c>, <0x7824000 0x800>; diff --git a/target/linux/ipq40xx/patches-5.10/101-arm-dts-IPQ4019-add-SDHCI-VQMMC-LDO-node.patch b/target/linux/ipq40xx/patches-5.10/101-arm-dts-IPQ4019-add-SDHCI-VQMMC-LDO-node.patch deleted file mode 100644 index 14affc28c1..0000000000 --- a/target/linux/ipq40xx/patches-5.10/101-arm-dts-IPQ4019-add-SDHCI-VQMMC-LDO-node.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 77d9b11ae7269dcf376c3b9493209f712524e986 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Wed, 22 Jan 2020 12:56:35 +0100 -Subject: [PATCH] arm: dts: IPQ4019: add SDHCI VQMMC LDO node - -Since we now have driver for the SDHCI VQMMC LDO needed -for I/0 voltage levels lets introduce the necessary node for it. - -Signed-off-by: Robert Marko ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 10 ++++++++++ - 1 file changed, 10 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -209,6 +209,16 @@ - interrupts = ; - }; - -+ vqmmc: regulator@1948000 { -+ compatible = "qcom,vqmmc-ipq4019-regulator"; -+ reg = <0x01948000 0x4>; -+ regulator-name = "vqmmc"; -+ regulator-min-microvolt = <1500000>; -+ regulator-max-microvolt = <3000000>; -+ regulator-always-on; -+ status = "disabled"; -+ }; -+ - sdhci: sdhci@7824900 { - compatible = "qcom,sdhci-msm-v4"; - reg = <0x7824900 0x11c>, <0x7824000 0x800>; diff --git a/target/linux/ipq40xx/patches-5.10/102-ARM-dts-qcom-ipq4019-add-USB-devicetree-nodes.patch b/target/linux/ipq40xx/patches-5.10/102-ARM-dts-qcom-ipq4019-add-USB-devicetree-nodes.patch deleted file mode 100644 index b033a1baee..0000000000 --- a/target/linux/ipq40xx/patches-5.10/102-ARM-dts-qcom-ipq4019-add-USB-devicetree-nodes.patch +++ /dev/null @@ -1,97 +0,0 @@ -From 193856b5fe11c50a0b6ff22457dd674c1a45fec6 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Wed, 9 Sep 2020 18:31:03 +0200 -Subject: [PATCH] ARM: dts: qcom: ipq4019: add USB devicetree nodes - -Since we now have driver for the USB PHY, and USB controller is already supported by the DWC3 driver lets add the necessary nodes to DTSI. - -Signed-off-by: John Crispin -Signed-off-by: Robert Marko -Cc: Luka Perkov -Reviewed-by: Vinod Koul ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 74 +++++++++++++++++++++++++++++ - 1 file changed, 74 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -615,5 +615,79 @@ - reg = <4>; - }; - }; -+ -+ usb3_ss_phy: ssphy@9a000 { -+ compatible = "qcom,usb-ss-ipq4019-phy"; -+ #phy-cells = <0>; -+ reg = <0x9a000 0x800>; -+ reg-names = "phy_base"; -+ resets = <&gcc USB3_UNIPHY_PHY_ARES>; -+ reset-names = "por_rst"; -+ status = "disabled"; -+ }; -+ -+ usb3_hs_phy: hsphy@a6000 { -+ compatible = "qcom,usb-hs-ipq4019-phy"; -+ #phy-cells = <0>; -+ reg = <0xa6000 0x40>; -+ reg-names = "phy_base"; -+ resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>; -+ reset-names = "por_rst", "srif_rst"; -+ status = "disabled"; -+ }; -+ -+ usb3: usb3@8af8800 { -+ compatible = "qcom,dwc3"; -+ reg = <0x8af8800 0x100>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ clocks = <&gcc GCC_USB3_MASTER_CLK>, -+ <&gcc GCC_USB3_SLEEP_CLK>, -+ <&gcc GCC_USB3_MOCK_UTMI_CLK>; -+ clock-names = "master", "sleep", "mock_utmi"; -+ ranges; -+ status = "disabled"; -+ -+ dwc3@8a00000 { -+ compatible = "snps,dwc3"; -+ reg = <0x8a00000 0xf8000>; -+ interrupts = ; -+ phys = <&usb3_hs_phy>, <&usb3_ss_phy>; -+ phy-names = "usb2-phy", "usb3-phy"; -+ dr_mode = "host"; -+ }; -+ }; -+ -+ usb2_hs_phy: hsphy@a8000 { -+ compatible = "qcom,usb-hs-ipq4019-phy"; -+ #phy-cells = <0>; -+ reg = <0xa8000 0x40>; -+ reg-names = "phy_base"; -+ resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>; -+ reset-names = "por_rst", "srif_rst"; -+ status = "disabled"; -+ }; -+ -+ usb2: usb2@60f8800 { -+ compatible = "qcom,dwc3"; -+ reg = <0x60f8800 0x100>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ clocks = <&gcc GCC_USB2_MASTER_CLK>, -+ <&gcc GCC_USB2_SLEEP_CLK>, -+ <&gcc GCC_USB2_MOCK_UTMI_CLK>; -+ clock-names = "master", "sleep", "mock_utmi"; -+ ranges; -+ status = "disabled"; -+ -+ dwc3@6000000 { -+ compatible = "snps,dwc3"; -+ reg = <0x6000000 0xf8000>; -+ interrupts = ; -+ phys = <&usb2_hs_phy>; -+ phy-names = "usb2-phy"; -+ dr_mode = "host"; -+ }; -+ }; - }; - }; diff --git a/target/linux/ipq40xx/patches-5.10/103-arm-dts-qcom-ipq4019-add-more-labels.patch b/target/linux/ipq40xx/patches-5.10/103-arm-dts-qcom-ipq4019-add-more-labels.patch deleted file mode 100644 index 0e215ee7cf..0000000000 --- a/target/linux/ipq40xx/patches-5.10/103-arm-dts-qcom-ipq4019-add-more-labels.patch +++ /dev/null @@ -1,42 +0,0 @@ -From caa3ee6b094ee18021943504c938919fcac325ec Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Wed, 9 Sep 2020 20:40:33 +0200 -Subject: [PATCH] arm: dts: qcom: ipq4019: add more labels - -Lets add labels to more commonly used nodes for easier modification in board DTS files. - -Signed-off-by: Robert Marko -Cc: Luka Perkov ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -190,7 +190,7 @@ - reg = <0x1800000 0x60000>; - }; - -- rng@22000 { -+ prng: rng@22000 { - compatible = "qcom,prng"; - reg = <0x22000 0x140>; - clocks = <&gcc GCC_PRNG_AHB_CLK>; -@@ -310,7 +310,7 @@ - status = "disabled"; - }; - -- crypto@8e3a000 { -+ crypto: crypto@8e3a000 { - compatible = "qcom,crypto-v5.1"; - reg = <0x08e3a000 0x6000>; - clocks = <&gcc GCC_CRYPTO_AHB_CLK>, -@@ -396,7 +396,7 @@ - dma-names = "rx", "tx"; - }; - -- watchdog@b017000 { -+ watchdog: watchdog@b017000 { - compatible = "qcom,kpss-wdt", "qcom,kpss-wdt-ipq4019"; - reg = <0xb017000 0x40>; - clocks = <&sleep_clk>;