From: Luka Perkov Date: Mon, 11 Aug 2014 20:35:02 +0000 (+0000) Subject: imx6: kernel: backport an upstream pci hang fix X-Git-Tag: reboot~6222 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=fe5d39d66ce550455ff0f4f0933d3fe2edcf9bd0;p=openwrt%2Fstaging%2Flynxis.git imx6: kernel: backport an upstream pci hang fix Signed-off-by: Tim Harvey SVN-Revision: 42144 --- diff --git a/target/linux/imx6/patches-3.14/0055-pci_imx6_fix-boot-hang-when-link-already-enabled.patch b/target/linux/imx6/patches-3.14/0055-pci_imx6_fix-boot-hang-when-link-already-enabled.patch new file mode 100644 index 0000000000..bae5a1fdf8 --- /dev/null +++ b/target/linux/imx6/patches-3.14/0055-pci_imx6_fix-boot-hang-when-link-already-enabled.patch @@ -0,0 +1,86 @@ +This fixes a boot hang observed when the bootloader +already enabled the PCIe link for it's own use. The +fundamental problem is that Freescale forgot to wire +up the core reset, so software doesn't have a sane way +to get the core into a defined state. + +According to the DW PCIe core reference manual configuration +of the core may only happen when the LTSSM is disabled, so +this is one of the first things we need to do. Apparently +this isn't safe to do when the LTSSM is in any other state +than "detect" as we observe an instant machine hang when +trying to do so while the link is already up. + +As a workaround force LTSSM into detect state right before +hitting the disable switch. + +Reported-by: Fabio Estevam freescale.com> +Signed-off-by: Lucas Stach pengutronix.de> +Acked-by: Tim Harvey gateworks.com> +--- a/drivers/pci/host/pci-imx6.c ++++ b/drivers/pci/host/pci-imx6.c +@@ -52,6 +52,9 @@ struct imx6_pcie { + + /* PCIe Port Logic registers (memory-mapped) */ + #define PL_OFFSET 0x700 ++#define PCIE_PL_PFLR (PL_OFFSET + 0x08) ++#define PCIE_PL_PFLR_LINK_STATE_MASK (0x3f << 16) ++#define PCIE_PL_PFLR_FORCE_LINK (1 << 15) + #define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28) + #define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c) + #define PCIE_PHY_DEBUG_R1_XMLH_LINK_IN_TRAINING (1 << 29) +@@ -217,6 +220,31 @@ static int imx6q_pcie_abort_handler(unsi + static int imx6_pcie_assert_core_reset(struct pcie_port *pp) + { + struct imx6_pcie *imx6_pcie = to_imx6_pcie(pp); ++ u32 val, gpr1, gpr12; ++ ++ /* ++ * If the bootloader already enabled the link we need some special ++ * handling to get the core back into a state where it is safe to ++ * touch it for configuration. As there is no dedicated reset signal ++ * wired up for MX6QDL, we need to manually force LTSSM into "detect" ++ * state before completely disabling LTSSM, which is a prerequisite ++ * for core configuration. ++ * If both LTSSM_ENABLE and REF_SSP_ENABLE are active we have a strong ++ * indication that the bootloader activated the link. ++ */ ++ regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, &gpr1); ++ regmap_read(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, &gpr12); ++ ++ if ((gpr1 & IMX6Q_GPR1_PCIE_REF_CLK_EN) && ++ (gpr12 & IMX6Q_GPR12_PCIE_CTL_2)) { ++ val = readl(pp->dbi_base + PCIE_PL_PFLR); ++ val &= ~PCIE_PL_PFLR_LINK_STATE_MASK; ++ val |= PCIE_PL_PFLR_FORCE_LINK; ++ writel(val, pp->dbi_base + PCIE_PL_PFLR); ++ ++ regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12, ++ IMX6Q_GPR12_PCIE_CTL_2, 0 << 10); ++ } + + regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1, + IMX6Q_GPR1_PCIE_TEST_PD, 1 << 18); +@@ -627,6 +655,14 @@ static int __init imx6_pcie_probe(struct + return 0; + } + ++static void imx6_pcie_shutdown(struct platform_device *pdev) ++{ ++ struct imx6_pcie *imx6_pcie = platform_get_drvdata(pdev); ++ ++ /* bring down link, so bootloader gets clean state in case of reboot */ ++ imx6_pcie_assert_core_reset(&imx6_pcie->pp); ++} ++ + static const struct of_device_id imx6_pcie_of_match[] = { + { .compatible = "fsl,imx6q-pcie", }, + {}, +@@ -639,6 +675,7 @@ static struct platform_driver imx6_pcie_ + .owner = THIS_MODULE, + .of_match_table = imx6_pcie_of_match, + }, ++ .shutdown = imx6_pcie_shutdown, + }; + + /* Freescale PCIe driver does not allow module unload */