From: Jo-Philipp Wich Date: Mon, 18 Jun 2012 23:08:18 +0000 (+0000) Subject: Add new package for configuring 6rd tunnels. X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=fdfffd0fbe8e6353b70ce84441aec99e6f50765e;p=openwrt%2Fstaging%2Fwigyori.git Add new package for configuring 6rd tunnels. This patch adds support for manually configuring 6rd tunnels. It depends on the netifd patches I sent earlier, which add 6rd support. A basic interface configuration looks like: config interface 'wan6' option proto '6rd' option peeraddr '192.0.2.1' option ip6prefix '2123::' option ip6prefixlen '16' option ip4prefixlen '0' Where ip4prefixlen is optional and actually defaults to 0, which would use all bits of the IPv4 in the calculated IPv6 subnet. I believe it should be possible to configure a regular 6to4 tunnel using this, and that we may want to merge the two eventually, but there are some larger differences between the two at the moment: - 6rd addresses can be more difficult to calculate. My ISP, for example, has a setup with a v6 mask of 43 bits, and a v4 mask of 19. - 6to4 has support for configuring radvd. This is something we want, of course, but it seems best to deal with this in a separate patch. Just creating a new package looked like the quickest way to get this in. This work is based on the 6in4 package, and work by Stijn Tintel. Signed-off-by: Stéphan Kochen SVN-Revision: 32431 --- diff --git a/package/6rd/Makefile b/package/6rd/Makefile new file mode 100644 index 0000000000..15b6e7a43e --- /dev/null +++ b/package/6rd/Makefile @@ -0,0 +1,55 @@ +# +# Copyright (C) 2010-2012 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +include $(TOPDIR)/rules.mk + +PKG_NAME:=6rd +PKG_VERSION:=1 +PKG_RELEASE:=1 + +include $(INCLUDE_DIR)/package.mk + +define Package/6rd + SECTION:=ipv6 + CATEGORY:=IPv6 + DEPENDS:=+kmod-ipv6 +kmod-sit + TITLE:=6rd configuration support + MAINTAINER:=Stéphan Kochen + PKGARCH:=all +endef + +define Package/6rd/description +Provides support for 6rd tunnels in /etc/config/network. +Refer to http://wiki.openwrt.org/doc/uci/network for +configuration details. +endef + +define Build/Prepare + mkdir -p $(PKG_BUILD_DIR) + $(CP) ./src/* $(PKG_BUILD_DIR)/ +endef + +define Build/Configure +endef + +define Build/Compile + $(MAKE) -C $(PKG_BUILD_DIR) \ + CC="$(TARGET_CC)" \ + CFLAGS="$(TARGET_CFLAGS) -Wall" \ + LDFLAGS="$(TARGET_LDFLAGS)" +endef + +define Package/6rd/install + $(INSTALL_DIR) $(1)/usr/sbin + $(INSTALL_BIN) $(PKG_BUILD_DIR)/6rdcalc $(1)/usr/sbin/ + $(INSTALL_DIR) $(1)/lib/netifd/proto + $(INSTALL_BIN) ./files/6rd.sh $(1)/lib/netifd/proto/6rd.sh + $(INSTALL_DIR) $(1)/etc/hotplug.d/iface + $(INSTALL_DATA) ./files/6rd.hotplug $(1)/etc/hotplug.d/iface/92-6rd +endef + +$(eval $(call BuildPackage,6rd)) diff --git a/package/6rd/files/6rd.hotplug b/package/6rd/files/6rd.hotplug new file mode 100644 index 0000000000..f38526c53a --- /dev/null +++ b/package/6rd/files/6rd.hotplug @@ -0,0 +1,29 @@ +#!/bin/sh + +if [ "$ACTION" = ifup ]; then + . /lib/functions.sh + + INCLUDE_ONLY=1 + . /lib/netifd/proto/6rd.sh + + include /lib/network + scan_interfaces + + update_tunnel() { + local cfg="$1" + + local proto + config_get proto "$cfg" proto + [ "$proto" = 6rd ] || return 0 + + local wandev + config_get wandev "$cfg" wan_device "$(find_6rd_wanif)" + [ "$wandev" = "$DEVICE" ] || return 0 + + local wanip=$(find_6rd_wanip "$wandev") + + [ -n "$wanip" ] && ifup "$cfg" + } + + config_foreach update_tunnel interface +fi diff --git a/package/6rd/files/6rd.sh b/package/6rd/files/6rd.sh new file mode 100644 index 0000000000..3786ef06f9 --- /dev/null +++ b/package/6rd/files/6rd.sh @@ -0,0 +1,83 @@ +#!/bin/sh +# 6rd.sh - IPv6-in-IPv4 tunnel backend +# Copyright (c) 2010-2012 OpenWrt.org + +[ -n "$INCLUDE_ONLY" ] || { + . /lib/functions.sh + . /lib/functions/network.sh + . ../netifd-proto.sh + init_proto "$@" +} + +tun_error() { + local cfg="$1"; shift; + + [ -n "$1" ] && proto_notify_error "$cfg" "$@" + proto_block_restart "$cfg" +} + +proto_6rd_setup() { + local cfg="$1" + local iface="$2" + local link="6rd-$cfg" + + local mtu ttl ipaddr peeraddr ip6prefix ip6prefixlen ip4prefixlen + json_get_vars mtu ttl ipaddr peeraddr ip6prefix ip6prefixlen ip4prefixlen + + [ -z "$ip6prefix" -o -z "$peeraddr" ] && { + tun_error "$cfg" "MISSING_ADDRESS" + return + } + + [ -z "$ipaddr" ] && { + local wanif + if ! network_find_wan wanif || ! network_get_ipaddr ipaddr "$wanif"; then + tun_error "$cfg" "NO_WAN_LINK" + return + fi + } + + # Determine the relay prefix. + local ip4prefixlen="${ip4prefixlen:-0}" + local ip4prefix=$(ipcalc.sh "$ipaddr/$ip4prefixlen" | grep NETWORK) + ip4prefix="${ip4prefix#NETWORK=}" + + # Determine our IPv6 address. + local ip6subnet=$(6rdcalc "$ip6prefix/$ip6prefixlen" "$ipaddr/$ip4prefixlen") + local ip6addr="${ip6subnet%%::*}::1" + + proto_init_update "$link" 1 + proto_add_ipv6_address "$ip6addr" "$ip6prefixlen" + proto_add_ipv6_route "::" 0 "::$peeraddr" + + proto_add_tunnel + json_add_string mode sit + json_add_int mtu "${mtu:-1280}" + json_add_int ttl "${ttl:-64}" + json_add_string local "$ipaddr" + json_add_string 6rd-prefix "$ip6prefix/$ip6prefixlen" + json_add_string 6rd-relay-prefix "$ip4prefix/$ip4prefixlen" + proto_close_tunnel + + proto_send_update "$cfg" +} + +proto_6rd_teardown() { + local cfg="$1" +} + +proto_6rd_init_config() { + no_device=1 + available=1 + + proto_config_add_int "mtu" + proto_config_add_int "ttl" + proto_config_add_string "peeraddr" + proto_config_add_string "ip6prefix" + proto_config_add_string "ip6prefixlen" + proto_config_add_string "ip4prefixlen" +} + +[ -n "$INCLUDE_ONLY" ] || { + add_protocol 6rd +} diff --git a/package/6rd/src/6rdcalc.c b/package/6rd/src/6rdcalc.c new file mode 100644 index 0000000000..56e07d255b --- /dev/null +++ b/package/6rd/src/6rdcalc.c @@ -0,0 +1,126 @@ +/* + * Utility used to calculate the 6rd subnet. + * + * Copyright 2012, Stéphan Kochen + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include +#include +#include +#include +#include +#include + +#define INET_PREFIXSTRLEN (INET_ADDRSTRLEN+3) +#define INET6_PREFIXSTRLEN (INET6_ADDRSTRLEN+4) + +static void print_usage() +{ + fprintf(stderr, "Usage: 6rdcalc / /\n"); + exit(1); +} + +static void print_error() +{ + fprintf(stderr, "%s", strerror(errno)); + exit(1); +} + +static void parse_str(int af, char *str, void *addr, unsigned long *mask) +{ + int ret; + char *slash; + + /* Split the address at the slash. */ + if ((slash = strchr(str, '/')) == NULL) + print_usage(); + *slash = '\0'; + + /* Parse the address. */ + if ((ret = inet_pton(af, str, addr)) != 1) { + if (ret == 0) + print_usage(); + else + print_error(); + } + + /* Parse the mask. */ + *mask = strtoul(slash+1, NULL, 10); + if ((af == AF_INET && *mask > 32) || + (af == AF_INET6 && *mask > 128)) + print_usage(); +} + +int main(int argc, const char **argv) +{ + char v6str[INET6_PREFIXSTRLEN], v4str[INET_PREFIXSTRLEN]; + struct in6_addr v6; + struct in_addr v4; + unsigned long v6it, v4it, mask; + unsigned char *byte4, *byte6; + unsigned char bit4, bit6; + + /* Check parameters. */ + if (argc != 3) + print_usage(); + + /* Parse the v6 address. */ + strncpy(v6str, argv[1], INET6_PREFIXSTRLEN); + v6str[INET6_PREFIXSTRLEN-1] = '\0'; + parse_str(AF_INET6, v6str, &v6, &v6it); + + /* Parse the v4 address */ + strncpy(v4str, argv[2], INET_PREFIXSTRLEN); + v6str[INET_PREFIXSTRLEN-1] = '\0'; + parse_str(AF_INET, v4str, &v4, &v4it); + + /* Check if the combined mask is within bounds. */ + mask = (32 - v4it) + v6it; + if (mask > 128) + print_usage(); + + /* Combine the addresses. */ + while (v4it < 32) { + byte6 = (unsigned char *)(&v6.s6_addr) + (v6it >> 3); + byte4 = (unsigned char *)(&v4.s_addr) + (v4it >> 3); + bit6 = 128 >> (v6it & 0x07); + bit4 = 128 >> (v4it & 0x07); + + if (*byte4 & bit4) + *byte6 |= bit6; + else + *byte6 &= ~bit6; + + v4it++; v6it++; + } + + /* Clear remaining bits. */ + while (v6it < 128) { + byte6 = (unsigned char *)(&v6.s6_addr) + (v6it >> 2); + bit6 = 128 >> (v6it & 0x07); + + *byte6 &= ~bit6; + + v6it++; + } + + /* Print the subnet prefix. */ + if (inet_ntop(AF_INET6, &v6, v6str, sizeof(v6str)) == NULL) + print_error(); + printf("%s/%lu\n", v6str, mask); + return 0; +} diff --git a/package/6rd/src/Makefile b/package/6rd/src/Makefile new file mode 100644 index 0000000000..2881d43589 --- /dev/null +++ b/package/6rd/src/Makefile @@ -0,0 +1,7 @@ +all: 6rdcalc + +6rdcalc: 6rdcalc.c + $(CC) $(CFLAGS) $(LDFLAGS) -o $@ $< + +clean: + rm -f 6rdcalc