From: Adrian Schmutzler Date: Thu, 9 May 2019 12:55:16 +0000 (+0200) Subject: ath79: Add support for TP-Link Archer C25 v1 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=fde0abf267033bfaaf08dc2f5cbba2bf2a3ff897;p=openwrt%2Fstaging%2Fluka.git ath79: Add support for TP-Link Archer C25 v1 The TP-Link Archer C25 is a low-cost dual-band router. Specification: - CPU: Atheros QCA9561 775 MHz - RAM: 64 MB - Flash: 8 MB - Wifi: 3x3 2.4 GHz (integrated), 1x1 5 GHz QCA9887 - NET: 5x 10/100 Mbps Ethernet Some LEDs are controlled by an additional 74HC595 chip, but not all of them as e.g. for the C59. Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds index 38927be33b..41a4abae18 100755 --- a/target/linux/ath79/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/base-files/etc/board.d/01_leds @@ -126,6 +126,16 @@ tplink,archer-c6-v2) ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x3C" ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x02" ;; +tplink,archer-c25-v1|\ +tplink,tl-wr841-v9|\ +tplink,tl-wr841-v11|\ +tplink,tl-wr842n-v3) + ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1" + ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10" + ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08" + ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04" + ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02" + ;; tplink,archer-c58-v1|\ tplink,archer-c59-v1) ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x1E" @@ -175,15 +185,6 @@ tplink,tl-wr842n-v2) ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10" ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02" ;; -tplink,tl-wr841-v9|\ -tplink,tl-wr841-v11|\ -tplink,tl-wr842n-v3) - ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1" - ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10" - ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08" - ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04" - ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02" - ;; ubnt,bullet-m|\ ubnt,bullet-m-xw|\ ubnt,nanostation-m|\ diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index 99e7825c67..84c83ff01e 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -68,6 +68,7 @@ ath79_setup_interfaces() "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" ;; buffalo,wzr-hp-ag300h|\ + tplink,archer-c25-v1|\ tplink,tl-mr3220-v1|\ tplink,tl-mr3420-v1|\ tplink,tl-wr841-v7|\ diff --git a/target/linux/ath79/base-files/etc/board.d/03_gpio_switches b/target/linux/ath79/base-files/etc/board.d/03_gpio_switches index 1c8a46df19..7f40285daf 100755 --- a/target/linux/ath79/base-files/etc/board.d/03_gpio_switches +++ b/target/linux/ath79/base-files/etc/board.d/03_gpio_switches @@ -23,6 +23,10 @@ dlink,dir-835-a1) librerouter,librerouter-v1) ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "1" "0" ;; +tplink,archer-c25-v1) + ucidef_add_gpio_switch "led_control" "LED control" "21" "0" + ucidef_add_gpio_switch "led_reset" "LED reset" "19" "1" + ;; ubnt,nanostation-ac) ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "3" ;; diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index c3bdc94866..b96c9a00b5 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -137,6 +137,10 @@ case "$FIRMWARE" in ath10kcal_extract "art" 20480 2116 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16) ;; + tplink,archer-c25-v1) + ath10kcal_extract "art" 20480 2116 + ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary info 8) -1) + ;; tplink,archer-a7-v5|\ tplink,archer-c2-v3|\ tplink,archer-c7-v4|\ diff --git a/target/linux/ath79/dts/qca9561_tplink_archer-c25-v1.dts b/target/linux/ath79/dts/qca9561_tplink_archer-c25-v1.dts new file mode 100644 index 0000000000..3c971b5464 --- /dev/null +++ b/target/linux/ath79/dts/qca9561_tplink_archer-c25-v1.dts @@ -0,0 +1,201 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include +#include + +#include "qca956x.dtsi" + +/ { + compatible = "tplink,archer-c25-v1", "qca,qca9561"; + model = "TP-Link Archer C25 v1"; + + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + led_spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sck-gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; + num-chipselects = <1>; + + /* can be removed on 4.19 */ + gpio-sck = <&gpio 15 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio 14 GPIO_ACTIVE_HIGH>; + + led_gpio: led_gpio@0 { + compatible = "fairchild,74hc595"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + registers-number = <1>; + spi-max-frequency = <10000000>; + }; + }; + + keys { + compatible = "gpio-keys"; + + wifi_button { + label = "WiFi button"; + linux,code = ; + gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + }; + + reset_button { + label = "Reset button"; + linux,code = ; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + }; + }; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + }; + + leds { + compatible = "gpio-leds"; + + power: power { + label = "tp-link:green:power"; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + wps { + label = "tp-link:green:wps"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + }; + + wlan2g { + label = "tp-link:green:wlan2g"; + gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + + wlan5g { + label = "tp-link:green:wlan5g"; + gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + wan_green { + label = "tp-link:green:wan"; + gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>; + }; + + wan_amber { + label = "tp-link:amber:wan"; + gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>; + }; + + lan1 { + label = "tp-link:green:lan1"; + gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>; + }; + + lan2 { + label = "tp-link:green:lan2"; + gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>; + }; + + lan3 { + label = "tp-link:green:lan3"; + gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>; + }; + + lan4 { + label = "tp-link:green:lan4"; + gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&spi { + status = "okay"; + num-cs = <1>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "factory-boot"; + reg = <0x000000 0x020000>; + read-only; + }; + + partition@20000 { + label = "u-boot"; + reg = <0x020000 0x010000>; + read-only; + }; + + partition@30000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x030000 0x7a0000>; + }; + + config: partition@7d0000 { + label = "config"; + reg = <0x7d0000 0x010000>; + read-only; + }; + + info: partition@7e0000 { + label = "info"; + reg = <0x7e0000 0x010000>; + read-only; + }; + + art: partition@7f0000 { + label = "art"; + reg = <0x7f0000 0x010000>; + read-only; + }; + }; + }; +}; + +&uart { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +ð0 { + phy-mode = "mii"; + phy-handle = <&swphy4>; + + status = "okay"; + mtd-mac-address = <&info 0x8>; +}; + +ð1 { + status = "okay"; + mtd-mac-address = <&info 0x8>; + mtd-mac-address-increment = <1>; +}; + +&wmac { + status = "okay"; + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&info 0x8>; +}; diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk index 4a5bb93864..8431e3a347 100644 --- a/target/linux/ath79/image/generic-tp-link.mk +++ b/target/linux/ath79/image/generic-tp-link.mk @@ -22,6 +22,17 @@ define Device/tplink_archer-c2-v3 endef TARGET_DEVICES += tplink_archer-c2-v3 +define Device/tplink_archer-c25-v1 + $(Device/tplink-safeloader-uimage) + ATH_SOC := qca9561 + IMAGE_SIZE := 7808k + DEVICE_TITLE := TP-Link Archer C25 v1 + TPLINK_BOARD_ID := ARCHER-C25-V1 + DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct + SUPPORTED_DEVICES += archer-c25-v1 +endef +TARGET_DEVICES += tplink_archer-c25-v1 + define Device/tplink_archer-c58-v1 $(Device/tplink-safeloader-uimage) ATH_SOC := qca9561