From: Christian Lamparter Date: Sun, 28 May 2023 21:00:00 +0000 (+0200) Subject: kernel: 6.1: fix swconfig not working X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=fdd3605398544cbe612c6bf1ea0d428c6b70bbd5;p=openwrt%2Fstaging%2Frmilecki.git kernel: 6.1: fix swconfig not working On 6.1 swconfig is not showing up and there's a splat: | ------------[ cut here ]------------ | WARNING: CPU: 0 PID: 1 at genl_register_family+0xb4/0x81c | Modules linked in: | CPU: 0 PID: 1 Comm: swapper Not tainted 6.1.29 #0 | Hardware name: Netgear WNDR4700/WNDR4720 Series APM821XX [...] | NIP: c0599370 LR: c0599344 CTR: c08c9950 | REGS: c0c21cb0 TRAP: 0700 Not tainted (6.1.29) | MSR: 00029000 CR: 48000888 XER: 00000000 | | GPR00: c0002678 c0c21da0 c0c2cd80 [...] | NIP [c0599370] genl_register_family+0xb4/0x81c | LR [c0599344] genl_register_family+0x88/0x81c | Call Trace: | [c0c21d80] [c0c21df4] 0xc0c21df4 (unreliable) | [c0c21e10] [c08c9988] swconfig_init+0x38/0x64 | [c0c21e30] [c0002678] do_one_initcall+0x50/0x260 This is due to it failing to register the netlink family since changes to upstream linux in patch. | commit 9c5d03d362519f36cd551aec596388f895c93d2d |Author: Jakub Kicinski |Date: Wed Aug 24 17:18:30 2022 -0700 | | genetlink: start to validate reserved header byte this is fixed by adding the proper value to the introduced "resv_start_op" parameter. Signed-off-by: Christian Lamparter --- diff --git a/target/linux/generic/files/drivers/net/phy/swconfig.c b/target/linux/generic/files/drivers/net/phy/swconfig.c index a734e576080..5fa2b147c6f 100644 --- a/target/linux/generic/files/drivers/net/phy/swconfig.c +++ b/target/linux/generic/files/drivers/net/phy/swconfig.c @@ -1054,6 +1054,9 @@ static struct genl_family switch_fam = { .module = THIS_MODULE, .ops = swconfig_ops, .n_ops = ARRAY_SIZE(swconfig_ops), +#if LINUX_VERSION_CODE > KERNEL_VERSION(6,0,0) + .resv_start_op = SWITCH_CMD_SET_VLAN + 1, +#endif }; #ifdef CONFIG_OF