From: David S. Miller Date: Thu, 7 Nov 2019 05:45:01 +0000 (-0800) Subject: Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next... X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=fdc66c3da93b6fa51192c4b33cf28c75b7141e67;p=openwrt%2Fstaging%2Fblogic.git Merge branch '100GbE' of git://git./linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2019-11-06 This series contains updates to ice driver only. Scott adds ethtool -m support so that we can read eeprom data on SFP/OSFP modules. Anirudh updates the return value to properly reflect when SRIOV is not supported. Md Fahad updates the driver to handle a change in the NVM, where the boot configuration section was moved to the Preserved Field Area (PFA) of the NVM. Paul resolves an issue when DCBx requests non-contiguous TCs, transmit hangs could occur, so configure a default traffic class (TC0) in these cases to prevent traffic hangs. Adds a print statement to notify the user when unsupported modules are inserted. Bruce fixes up the driver unload code flow to ensure we do not clear the interrupt scheme until the reset is complete, otherwise a hardware error may occur. Dave updates the DCB initialization to set is_sw_lldp boolean when the firmware has been detected to be in an untenable state. This will ensure that the firmware is in a known state. Michal saves off the PCI state and I/O BARs address after PCI bus reset so that after the reset, device registers can be read. Also adds a NULL pointer check to prevent a potential kernel panic. Mitch resolves an issue where VF's on PF's other than 0 were not seeing resets by using the per-PF VF ID instead of the absolute VF ID. Krzysztof does some code cleanup to remove a unneeded wrapper and reduces the code complexity. Brett reduces confusion by changing the name of ice_vc_dis_vf() to ice_vc_reset_vf() to better describe what the function is actually doing. v2: dropped patch 3 "ice: Add support for FW recovery mode detection" from the origin al series, while Ani makes changes based on community feedback to implement devlink into the changes. v3: dropped patch 1 "ice: implement set_eeprom functionality" due to a bug found and additional changes will be needed when Ani implements devlink in the driver. ==================== Signed-off-by: David S. Miller --- fdc66c3da93b6fa51192c4b33cf28c75b7141e67