From: Jonas Gorski Date: Sun, 11 Jun 2017 10:50:14 +0000 (+0200) Subject: base-files: board.json's switch reset means existence, not argument X-Git-Tag: v18.06.0-rc1~2720 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=fd952c7a83e5357f5dcab28c0bcaca756e27eaa0;p=openwrt%2Fopenwrt.git base-files: board.json's switch reset means existence, not argument Don't pass the value unconditionally to swconfig as a parameter but instead only call reset if it is 1. Signed-off-by: Jonas Gorski --- diff --git a/package/base-files/files/lib/preinit/10_indicate_preinit b/package/base-files/files/lib/preinit/10_indicate_preinit index a30bf34f6e..43bd04d444 100644 --- a/package/base-files/files/lib/preinit/10_indicate_preinit +++ b/package/base-files/files/lib/preinit/10_indicate_preinit @@ -43,7 +43,10 @@ preinit_config_switch() { json_select .. if [ "$device" = "$lan_if" ]; then - swconfig dev $name set reset $reset + if [ "$reset" -eq "1" ]; then + swconfig dev $name set reset + fi + swconfig dev $name set enable_vlan $enable swconfig dev $name vlan $role set ports "$ports" swconfig dev $name set apply