From: Adrian Schmutzler Date: Mon, 21 Oct 2019 13:40:32 +0000 (+0200) Subject: ramips: fix LAN/WAN MAC addresses of Xiaomi MiWiFi Mini board X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=fd1d03f8536aa232ab1a164cc340791858f3ae89;p=openwrt%2Fstaging%2Frmilecki.git ramips: fix LAN/WAN MAC addresses of Xiaomi MiWiFi Mini board Based on stock firmware tests, both LAN and WAN ports use the MAC address from 0x28 on factory partition. In OpenWrt, this one is already set in DTS. This patch removes the local bit set in 02_network previously, and adjusts LAN/WAN addresses as on stock firmware. Note that in tests we found a MAC address in 0x2e that is the one in 0x28 plus 1. Since stock firmware does not use it though, we do not use it either. Thanks to Chih-Wei Chen for testing this on his device. ref: https://github.com/openwrt/openwrt/pull/2497 Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index ded416ae98d..b6c3ae42cba 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -587,6 +587,7 @@ ramips_setup_macs() buffalo,whr-g300n|\ buffalo,wsr-600dhp|\ glinet,gl-mt300n-v2|\ + xiaomi,miwifi-mini|\ zyxel,keenetic-start) # This empty case has to be kept for devices without any MAC address adjustments ;; @@ -721,9 +722,6 @@ ramips_setup_macs() lan_mac=$(mtd_get_mac_binary factory 0xe006) label_mac=$lan_mac ;; - xiaomi,miwifi-mini) - lan_mac=$(macaddr_setbit_la "$(cat /sys/class/net/eth0/address)") - ;; zbtlink,zbt-we1326) wan_mac=$(mtd_get_mac_binary factory 0xe006) label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)