From: Arınç ÜNAL Date: Wed, 19 Oct 2022 11:43:00 +0000 (+0300) Subject: ramips: do not use GPIO function on switch pins on certain devices X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=fc33c41c21362b7186aa051a2140623943fa3143;p=openwrt%2Fstaging%2Frobimarko.git ramips: do not use GPIO function on switch pins on certain devices The pins of the MT7530 switch that translate to GPIO 0, 3, 6, 9 and 12 has got a function, by default, which does the same thing as the netdev trigger. Because of bridge offloading on DSA, the netdev trigger won't see the frames between the switch ports whilst the default function will. Do not use the GPIO function on switch pins on devices that fall under this category. Keep it for: mt7621_belkin_rt1800.dts: There's only one LED which is for the wan interface and there's no bridge offloading between the "wan" interface and other interfaces. mt7621_yuncore_ax820.dts: There's no bridge offloading between the "wan" and "lan" interfaces. Signed-off-by: Arınç ÜNAL --- diff --git a/target/linux/ramips/dts/mt7621_linksys_e7350.dts b/target/linux/ramips/dts/mt7621_linksys_e7350.dts index d7b8c214b9..ea8a684148 100644 --- a/target/linux/ramips/dts/mt7621_linksys_e7350.dts +++ b/target/linux/ramips/dts/mt7621_linksys_e7350.dts @@ -57,40 +57,6 @@ function = LED_FUNCTION_WAN; gpios = <&gpio 15 GPIO_ACTIVE_LOW>; }; - - led-wan2 { - color = ; - function = LED_FUNCTION_WAN; - gpios = <&switch0 0 GPIO_ACTIVE_LOW>; - }; - - led-lan4 { - color = ; - function = LED_FUNCTION_LAN; - function-enumerator = <4>; - gpios = <&switch0 3 GPIO_ACTIVE_LOW>; - }; - - led-lan3 { - color = ; - function = LED_FUNCTION_LAN; - function-enumerator = <3>; - gpios = <&switch0 6 GPIO_ACTIVE_LOW>; - }; - - led-lan2 { - color = ; - function = LED_FUNCTION_LAN; - function-enumerator = <2>; - gpios = <&switch0 9 GPIO_ACTIVE_HIGH>; - }; - - led-lan1 { - color = ; - function = LED_FUNCTION_LAN; - function-enumerator = <1>; - gpios = <&switch0 12 GPIO_ACTIVE_LOW>; - }; }; }; @@ -185,9 +151,6 @@ }; &switch0 { - gpio-controller; - #gpio-cells = <2>; - ports { port@1 { status = "okay"; diff --git a/target/linux/ramips/dts/mt7621_netgear_wax202.dts b/target/linux/ramips/dts/mt7621_netgear_wax202.dts index f17a805363..02f540d743 100644 --- a/target/linux/ramips/dts/mt7621_netgear_wax202.dts +++ b/target/linux/ramips/dts/mt7621_netgear_wax202.dts @@ -53,31 +53,16 @@ gpios = <&gpio 16 GPIO_ACTIVE_LOW>; }; - led_lan1_green: lan1_green { - label = "green:lan1"; - gpios = <&switch0 3 GPIO_ACTIVE_LOW>; - }; - led_lan1_orange: lan1_orange { label = "orange:lan1"; gpios = <&gpio 15 GPIO_ACTIVE_LOW>; }; - led_lan2_green: lan2_green { - label = "green:lan2"; - gpios = <&switch0 6 GPIO_ACTIVE_LOW>; - }; - led_lan2_orange: lan2_orange { label = "orange:lan2"; gpios = <&gpio 13 GPIO_ACTIVE_LOW>; }; - led_lan3_green: lan3_green { - label = "green:lan3"; - gpios = <&switch0 12 GPIO_ACTIVE_LOW>; - }; - led_lan3_orange: lan3_orange { label = "orange:lan3"; gpios = <&gpio 14 GPIO_ACTIVE_LOW>; @@ -256,9 +241,6 @@ }; &switch0 { - gpio-controller; - #gpio-cells = <2>; - ports { port@1 { status = "okay"; diff --git a/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608.dtsi b/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608.dtsi index f19cb4db17..59fab90ed1 100644 --- a/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608.dtsi +++ b/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg1608.dtsi @@ -51,40 +51,6 @@ gpios = <&gpio 14 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy1tpt"; }; - - lan1 { - color = ; - function = LED_FUNCTION_LAN; - function-enumerator = <1>; - gpios = <&switch0 0 GPIO_ACTIVE_LOW>; - }; - - lan2 { - color = ; - function = LED_FUNCTION_LAN; - function-enumerator = <2>; - gpios = <&switch0 3 GPIO_ACTIVE_LOW>; - }; - - lan3 { - color = ; - function = LED_FUNCTION_LAN; - function-enumerator = <3>; - gpios = <&switch0 6 GPIO_ACTIVE_LOW>; - }; - - lan4 { - color = ; - function = LED_FUNCTION_LAN; - function-enumerator = <4>; - gpios = <&switch0 9 GPIO_ACTIVE_HIGH>; - }; - - wan { - color = ; - function = LED_FUNCTION_WAN; - gpios = <&switch0 12 GPIO_ACTIVE_LOW>; - }; }; }; @@ -186,9 +152,6 @@ }; &switch0 { - gpio-controller; - #gpio-cells = <2>; - ports { port@0 { status = "okay"; diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds index 5fafb9b50a..985eefb860 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds @@ -94,13 +94,6 @@ keenetic,kn-3010) linksys,e5600) ucidef_set_led_netdev "wan" "wan link" "blue:wan" "wan" "link" ;; -linksys,e7350) - ucidef_set_led_netdev "lan1" "lan1" "blue:lan-1" "lan1" - ucidef_set_led_netdev "lan2" "lan2" "blue:lan-2" "lan2" - ucidef_set_led_netdev "lan3" "lan4" "blue:lan-3" "lan3" - ucidef_set_led_netdev "lan4" "lan4" "blue:lan-4" "lan4" - ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan" - ;; linksys,ea6350-v4|\ linksys,ea7300-v1|\ linksys,ea7300-v2|\ @@ -149,9 +142,6 @@ netgear,r7450) ;; netgear,wax202) ucidef_set_led_netdev "internet" "Internet" "green:net" "wan" - ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "lan1" - ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "lan2" - ucidef_set_led_netdev "lan3" "LAN3" "green:lan3" "lan3" ;; oraybox,x3a) ucidef_set_led_netdev "wan" "wan link" "red:status" "wan" @@ -204,13 +194,6 @@ yuncore,ax820) ucidef_set_led_netdev "lan" "LAN" "green:lan" "lan" ucidef_set_led_netdev "wan" "WAN" "green:wan" "wan" ;; -zbtlink,zbt-wg1608-16m) - ucidef_set_led_netdev "lan1" "LAN1" "green:lan-1" "lan1" - ucidef_set_led_netdev "lan2" "LAN2" "green:lan-2" "lan2" - ucidef_set_led_netdev "lan3" "LAN3" "green:lan-3" "lan3" - ucidef_set_led_netdev "lan4" "LAN4" "green:lan-4" "lan4" - ucidef_set_led_netdev "wan" "WAN" "green:wan" "wan" - ;; zyxel,lte3301-plus) ucidef_set_led_netdev "internet" "internet" "white:internet" "wwan0" ;;