From: David Bauer Date: Wed, 31 Mar 2021 23:20:45 +0000 (+0200) Subject: ath79: force SGMII SerDes mode to MAC operation X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=fbbad9a9a629b388626b477e6cd692c160f63fb3;p=openwrt%2Fstaging%2Fthess.git ath79: force SGMII SerDes mode to MAC operation The mode on the SGMII SerDes on the QCA9563 is 1000 Base-X by default. This only allows for 1000 Mbit/s links, however when used with an SGMII PHY in 100 Mbit/s link mode, the link remains dead. This strictly has nothing to do with the SerDes calibration, however it is done at the same point in the QCA reference U-Boot which is the blueprint for everything happening here. As the current state is more or less a hack, this should be fine. This fixes the issues outlined above on a TP-Link EAP-225 Outdoor. Reported-by: Tom Herbers Tested-by: Tom Herbers Signed-off-by: David Bauer --- diff --git a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c b/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c index abf7fc7d29..d060568593 100644 --- a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c +++ b/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c @@ -602,6 +602,11 @@ static void ag71xx_sgmii_serdes_init_qca956x(struct device_node *np) goto err_iomap; } + t = __raw_readl(gmac_base + QCA956X_GMAC_REG_SGMII_CONFIG); + t &= ~(QCA956X_SGMII_CONFIG_MODE_CTRL_MASK << QCA956X_SGMII_CONFIG_MODE_CTRL_SHIFT); + t |= QCA956X_SGMII_CONFIG_MODE_CTRL_SGMII_MAC; + __raw_writel(t, gmac_base + QCA956X_GMAC_REG_SGMII_CONFIG); + pr_debug("%pOF: fixup SERDES calibration to value %i\n", np_dev, serdes_cal); t = __raw_readl(gmac_base + QCA956X_GMAC_REG_SGMII_SERDES); diff --git a/target/linux/ath79/patches-5.4/0040-ath79-sgmii-config.patch b/target/linux/ath79/patches-5.4/0040-ath79-sgmii-config.patch new file mode 100644 index 0000000000..bf7cbf2716 --- /dev/null +++ b/target/linux/ath79/patches-5.4/0040-ath79-sgmii-config.patch @@ -0,0 +1,9 @@ +--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h ++++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h +@@ -1376,5 +1376,6 @@ + + #define QCA956X_SGMII_CONFIG_MODE_CTRL_SHIFT 0 + #define QCA956X_SGMII_CONFIG_MODE_CTRL_MASK 0x7 ++#define QCA956X_SGMII_CONFIG_MODE_CTRL_SGMII_MAC 0x2 + + #endif /* __ASM_MACH_AR71XX_REGS_H */