From: Mathias Kresin <dev@kresin.me>
Date: Wed, 4 Apr 2018 16:26:24 +0000 (+0200)
Subject: ramips: ignore already handled ethernet phys
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=fb423f6e01ce95523959aa3e428aa2ae7cee27f5;p=openwrt%2Fstaging%2Fxback.git

ramips: ignore already handled ethernet phys

The whole logic in fe_phy_connect() is based on the asumption that mdio
address and switch port id are equal. Albeit it is true for most
boards, it doesn't is for all.

It isn't yet clear which subtargets/boards require the devicetree less
ethernet phy handling. Hence change the code in a way that it doesn't
touch ethernet phys which were early attached and are already handled.

Signed-off-by: Mathias Kresin <dev@kresin.me>
---

diff --git a/target/linux/ramips/files-4.14/drivers/net/ethernet/mediatek/mdio.c b/target/linux/ramips/files-4.14/drivers/net/ethernet/mediatek/mdio.c
index a1c115687e..2e2da6021f 100644
--- a/target/linux/ramips/files-4.14/drivers/net/ethernet/mediatek/mdio.c
+++ b/target/linux/ramips/files-4.14/drivers/net/ethernet/mediatek/mdio.c
@@ -127,8 +127,14 @@ static int fe_phy_connect(struct fe_priv *priv)
 				priv->phy_dev = priv->phy->phy[i];
 				priv->phy_flags = FE_PHY_FLAG_PORT;
 			}
-		} else if (priv->mii_bus && mdiobus_get_phy(priv->mii_bus, i)) {
-			phy_init(priv, mdiobus_get_phy(priv->mii_bus, i));
+		} else if (priv->mii_bus) {
+			struct phy_device *phydev;
+
+			phydev = mdiobus_get_phy(priv->mii_bus, i);
+			if (!phydev || phydev->attached_dev)
+				continue;
+
+			phy_init(priv, phydev);
 			if (!priv->phy_dev) {
 				priv->phy_dev = mdiobus_get_phy(priv->mii_bus, i);
 				priv->phy_flags = FE_PHY_FLAG_ATTACH;