From: Linus Walleij <linus.walleij@linaro.org>
Date: Wed, 14 Aug 2024 08:26:25 +0000 (+0200)
Subject: bmips: inteno-xg6846: Add EEPROM node
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=fb2eabfd6b6e9e02dda659668fb91d5a02e9e652;p=openwrt%2Fstaging%2Fansuel.git

bmips: inteno-xg6846: Add EEPROM node

For some troublesome devices it is necessary to obtain direct access
to the SFP module EEPROM so define it in the device tree.

Suggested-by: Paul Donald <newtwen@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---

diff --git a/target/linux/bmips/dts/bcm6328-inteno-xg6846.dts b/target/linux/bmips/dts/bcm6328-inteno-xg6846.dts
index 4079bfff17..94e57dcb0d 100644
--- a/target/linux/bmips/dts/bcm6328-inteno-xg6846.dts
+++ b/target/linux/bmips/dts/bcm6328-inteno-xg6846.dts
@@ -40,6 +40,12 @@
 		scl-gpios = <&gpio 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+
+		sfp_eeprom: eeprom@50 {
+			compatible = "atmel,24c02";
+			reg = <0x50>;
+			read-only;
+		};
 	};
 
 	/* This I2C bus is used for the external CATV connector (usually unused) */