From: Adrian Schmutzler Date: Thu, 18 Jun 2020 09:13:12 +0000 (+0200) Subject: ipq40xx: consolidate DTS files X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=fa6d53261a68997a7928f38578c5824a2d375d6f;p=openwrt%2Fstaging%2Fthess.git ipq40xx: consolidate DTS files The DTS files in files-4.19 and files-5.4 are exactly identical except for one file (qcom-ipq4018-emr3500.dts), which is only present for 5.4. Since there is no point in maintaining all these identical files twice, this patch moves them to the "files" directory. If there ever was a new kernel with substantial DTS changes, a new folder would need to be introduced anyway and could easily be done. Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-a42.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-a42.dts deleted file mode 100644 index 33c44a8097..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-a42.dts +++ /dev/null @@ -1,219 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * Copyright (c) 2017, Sven Eckelmann - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "OpenMesh A42"; - compatible = "openmesh,a42"; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2: usb2@60f8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - leds { - compatible = "gpio-leds"; - - red { - label = "a42:red:status"; - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; - }; - - power: green { - label = "a42:green:status"; - gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; - }; - - blue { - label = "a42:blue:status"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; - }; - }; - - watchdog { - compatible = "linux,wdt-gpio"; - gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; - hw_algo = "toggle"; - /* hw_margin_ms is actually 300s but driver limits it to 60s */ - hw_margin_ms = <60000>; - always-running; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - /* partitions are passed via bootloader */ - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac0 { - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <2 0x20>; -}; - -&gmac1 { - qcom,phy_mdio_addr = <3>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <1 0x10>; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "OM-A42"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "OM-A42"; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts deleted file mode 100644 index e21c40cae0..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts +++ /dev/null @@ -1,348 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "ALFA Network AP120C-AC"; - compatible = "alfa-network,ap120c-ac"; - - aliases { - led-boot = &status; - led-failsafe = &status; - led-running = &status; - led-upgrade = &status; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - status: status { - label = "ap120c-ac:blue:status"; - gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - - wan { - label = "ap120c-ac:amber:wan"; - gpios = <&qca8075 19 GPIO_ACTIVE_HIGH>; - }; - - wlan2g { - label = "ap120c-ac:green:wlan2g"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tpt"; - }; - - wlan5g { - label = "ap120c-ac:red:wlan5g"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy1tpt"; - }; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - counter@4a1000 { - compatible = "qcom,qca-gcnt"; - reg = <0x4a1000 0x4>; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2@60f8800 { - status = "okay"; - }; - - usb3@8af8800 { - status = "okay"; - - dwc3@8a00000 { - phys = <&usb3_hs_phy>; - phy-names = "usb2-phy"; - }; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - qca8075: ess-switch@c000000 { - status = "okay"; - - switch_lan_bmp = <0x10>; - switch_wan_bmp = <0x20>; - - #gpio-cells = <2>; - gpio-controller; - }; - - edma@c080000 { - status = "okay"; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_i2c3 { - status = "okay"; - - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - - tpm@29 { - compatible = "atmel,at97sc3204t"; - reg = <0x29>; - }; -}; - -&blsp1_spi1 { - status = "okay"; - - pinctrl-0 = <&spi0_pins>; - pinctrl-names = "default"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, - <&tlmm 4 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - - partition@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - - partition@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - - partition@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - - partition@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - - partition@e0000 { - label = "APPSBLENV"; - reg = <0x000e0000 0x00010000>; - }; - - partition@f0000 { - label = "APPSBL"; - reg = <0x000f0000 0x00080000>; - read-only; - }; - - partition@170000 { - label = "ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - - partition@180000 { - label = "priv_data1"; - reg = <0x00180000 0x00010000>; - read-only; - }; - - partition@190000 { - label = "priv_data2"; - reg = <0x00190000 0x00010000>; - read-only; - }; - }; - }; - - nand@1 { - compatible = "spi-nand"; - reg = <1>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "rootfs1"; - reg = <0x00000000 0x04000000>; - }; - - partition@4000000 { - label = "rootfs2"; - reg = <0x04000000 0x04000000>; - }; - }; - }; -}; - -&blsp1_uart1 { - status = "okay"; - - pinctrl-0 = <&serial0_pins>; - pinctrl-names = "default"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac0 { - qcom,forced_duplex = <1>; - qcom,forced_speed = <1000>; - qcom,phy_mdio_addr = <3>; - qcom,poll_required = <1>; - vlan_tag = <1 0x10>; -}; - -&gmac1 { - qcom,forced_duplex = <1>; - qcom,forced_speed = <1000>; - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - vlan_tag = <2 0x20>; -}; - -&tlmm { - i2c0_pins: i2c0_pinmux { - mux_i2c { - function = "blsp_i2c0"; - pins = "gpio58", "gpio59"; - drive-strength = <16>; - bias-disable; - }; - }; - - mdio_pins: mdio_pinmux { - mux_mdio { - pins = "gpio53"; - function = "mdio"; - bias-pull-up; - }; - - mux_mdc { - pins = "gpio52"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial0_pins: serial0_pinmux { - mux_uart { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi0_pins: spi0_pinmux { - mux_spi { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - mux_cs { - function = "gpio"; - pins = "gpio54", "gpio4"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC"; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts deleted file mode 100644 index d8b9e7ef13..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts +++ /dev/null @@ -1,242 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "EZVIZ CS-W3-WD1200G EUP"; - compatible = "ezviz,cs-w3-wd1200g-eup"; - - aliases { - led-boot = &led_status_green; - led-failsafe = &led_status_red; - led-running = &led_status_blue; - led-upgrade = &led_status_green; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; - reset-delay-us = <5000>; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_status_red: status_red { - label = "cs-w3-wd1200g-eup:red:status"; - gpios = <&tlmm 0 GPIO_ACTIVE_LOW>; - }; - - led_status_green: status_green { - label = "cs-w3-wd1200g-eup:green:status"; - gpios = <&tlmm 3 GPIO_ACTIVE_LOW>; - }; - - led_status_blue: status_blue { - label = "cs-w3-wd1200g-eup:blue:status"; - gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio53"; - function = "mdio"; - bias-pull-up; - }; - - mux_2 { - pins = "gpio52"; - function = "mdc"; - bias-pull-up; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - - partition1@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - - partition2@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - - partition3@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - - partition4@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - - partition5@E0000 { - label = "APPSBLENV"; - reg = <0x000e0000 0x00010000>; - read-only; - }; - - partition6@F0000 { - label = "APPSBL"; - reg = <0x000f0000 0x00080000>; - read-only; - }; - - partition7@170000 { - label = "ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - - partition9@580000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x00180000 0x00e80000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "ezviz-cs-w3-wd1200g-eup"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "ezviz-cs-w3-wd1200g-eup"; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts deleted file mode 100644 index 17d9215544..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts +++ /dev/null @@ -1,241 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "D-Link DAP 2610"; - compatible = "dlink,dap-2610"; - - aliases { - led-boot = &led_red; - led-failsafe = &led_red; - led-running = &led_green; - led-upgrade = &led_red; - }; - - soc { - edma@c080000 { - qcom,num_gmac = <1>; - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - rng@22000 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - switch_lan_bmp = <0x20>; - switch_wan_bmp = <0x00>; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_red: red { - label = "dap-2610:red:power"; - gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; - }; - - led_green: green { - label = "dap-2610:green:power"; - gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fixed-partitions"; - - partition@0 { - label = "SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - partition@40000 { - label = "MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - partition@60000 { - label = "QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - partition@c0000 { - label = "CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - partition@d0000 { - label = "DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - partition@e0000 { - label = "APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - partition@f0000 { - label = "APPSBL"; - reg = <0xf0000 0x80000>; - read-only; - }; - partition@170000 { - label = "ART"; - reg = <0x170000 0x10000>; - read-only; - }; - partition@180000 { - compatible = "wrg"; - label = "firmware"; - reg = <0x180000 0xdc0000>; - }; - partition@fb0000 { - label = "rgbd"; - reg = <0xfb0000 0x10000>; - read-only; - }; - partition@fc0000 { - label = "bdcfg"; - reg = <0xfc0000 0x10000>; - read-only; - }; - partition@fd0000 { - label = "langpack"; - reg = <0xfd0000 0x20000>; - read-only; - }; - partition@ff0000 { - label = "certificate"; - reg = <0xff0000 0x10000>; - read-only; - }; - partition@f40000 { - label = "captival"; - reg = <0xf40000 0x70000>; - read-only; - }; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac0 { - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <1 0x20>; -}; - -&mdio { - status = "okay"; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - mux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - mux_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "dlink,dap-2610"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "dlink,dap-2610"; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts deleted file mode 100644 index 2f9a890485..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts +++ /dev/null @@ -1,277 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "Linksys EA6350v3"; - compatible = "linksys,ea6350v3"; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2@60f8800 { - status = "okay"; - }; - - usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&tlmm 0 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - power: status { - label = "EA6350v3:green:status"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "linksys-ea6350v3"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "linksys-ea6350v3"; -}; - - -&blsp_dma { - status = "okay"; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - mux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - mux_cs { - function = "gpio"; - pins = "gpio54", "gpio59"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp1_spi1 { /* BLSP1 QUP1 */ - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, - <&tlmm 59 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - SBL1@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - MBIB@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - QSEE@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - CDT@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - APPSBLENV@d0000 { - label = "APPSBLENV"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - APPSBL@e0000 { - label = "APPSBL"; /* uboot */ - reg = <0x000e0000 0x00080000>; - read-only; - }; - ART@160000 { - label = "ART"; - reg = <0x00160000 0x00010000>; - read-only; - }; - u_env@170000 { - label = "u_env"; - reg = <0x00170000 0x00020000>; - }; - s_env@190000 { - label = "s_env"; - reg = <0x00190000 0x00020000>; - }; - devinfo@1b0000 { - label = "devinfo"; - reg = <0x001b0000 0x00010000>; - }; - /* 0x001c0000 - 0x00200000 unused */ - }; - }; - - flash@1 { - status = "okay"; - compatible = "spi-nand"; - reg = <1>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - kernel@0 { - label = "kernel"; - reg = <0x00000000 0x02800000>; - }; - rootfs@300000 { - label = "rootfs"; - reg = <0x00300000 0x02500000>; - }; - alt_kernel@2800000 { - label = "alt_kernel"; - reg = <0x02800000 0x02800000>; - }; - alt_rootfs@2b00000 { - label = "alt_rootfs"; - reg = <0x02b00000 0x02500000>; - }; - sysdiag@5000000 { - label = "sysdiag"; - reg = <0x05000000 0x00100000>; - }; - syscfg@5100000 { - label = "syscfg"; - reg = <0x05100000 0x02F00000>; - }; - /* 0x00000000 - 0x08000000: 128 MiB */ - }; - }; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts deleted file mode 100644 index 32fded4c0e..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts +++ /dev/null @@ -1,235 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "EnGenius EAP1300"; - compatible = "engenius,eap1300"; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>; - linux,code = ; - }; - }; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - leds { - compatible = "gpio-leds"; - - power: orange { - label = "eap1300:orange:power"; - gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; - }; - - lan { - label = "eap1300:blue:lan"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - }; - - mesh { - label = "eap1300:blue:mesh"; - gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; - }; - - wlan2g { - label = "eap1300:blue:wlan2g"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - }; - - wlan5g { - label = "eap1300:yellow:wlan5g"; - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio54", "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition1@40000 { - label = "0:MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition2@60000 { - label = "0:QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition3@c0000 { - label = "0:CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition4@d0000 { - label = "0:DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition5@e0000 { - label = "0:APPSBLENV"; - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition6@f0000 { - label = "0:APPSBL"; - reg = <0x000f0000 0x00090000>; - read-only; - }; - partition7@180000 { - label = "0:ART"; - reg = <0x00180000 0x00010000>; - read-only; - }; - partition8@190000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x190000 0x1dc0000>; - }; - partition9@1f50000 { - label = "u-boot-env"; - reg = <0x01f50000 0x00010000>; - }; - partition10@1f60000 { - label = "userconfig"; - reg = <0x01f60000 0x000a0000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac0 { - vlan_tag = <2 0x20>; -}; - -&gmac1 { - vlan_tag = <1 0x10>; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "EnGenius-EAP1300"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "EnGenius-EAP1300"; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-emd1.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-emd1.dts deleted file mode 100644 index cf4f793f21..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-emd1.dts +++ /dev/null @@ -1,233 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "EnGenius EMD1"; - compatible = "engenius,emd1"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - switch_lan_bmp = <0x20>; - switch_wan_bmp = <0x00>; - }; - - edma@c080000 { - status = "okay"; - qcom,num_gmac = <1>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_power: power { - label = "emd1:white:power"; - gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; - }; - - wlan2g { - label = "emd1:red:wlan2g"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tpt"; - }; - - wlan5g { - label = "emd1:blue:wlan5g"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy1tpt"; - }; - - mesh { - label = "emd1:orange:mesh"; - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio54", "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - pin_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "0:SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition1@40000 { - label = "0:MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition2@60000 { - label = "0:QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition3@c0000 { - label = "0:CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition4@d0000 { - label = "0:DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition5@e0000 { - label = "0:APPSBLENV"; - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition6@f0000 { - label = "0:APPSBL"; - reg = <0x000f0000 0x00080000>; - read-only; - }; - partition7@170000 { - label = "0:ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - partition8@180000 { - label = "userconfig"; - reg = <0x00180000 0x00080000>; - read-only; - }; - partition9@200000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x200000 0x01e00000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&gmac0 { - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <1 0x20>; -}; - -&cryptobam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "EnGenius-EMD1"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "EnGenius-EMD1"; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts deleted file mode 100644 index 8636b18b2e..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts +++ /dev/null @@ -1,265 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "EnGenius ENS620EXT"; - compatible = "engenius,ens620ext"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - - /* - * Disable the broken restart as a workaround for the buggy - * 3.0.0/3.0.1 U-boots that ship with the device. - * Note: The watchdog is now used to restart this device. - */ - restart@4ab000 { - status = "disabled"; - }; - }; - - buttons { - compatible = "gpio-keys"; - - wps { - label = "wps"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - power: power { - label = "ens620ext:amber:power"; - gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; - }; - - lan1 { - label = "ens620ext:green:lan1"; - gpios = <&tlmm 1 GPIO_ACTIVE_LOW>; - }; - - lan2 { - label = "ens620ext:green:lan2"; - gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; - }; - - wlan2G { - label = "ens620ext:green:wlan2G"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - }; - - wlan5G { - label = "ens620ext:green:wlan5G"; - gpios = <&tlmm 0 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - mux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - mux_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp1_spi1 { /* BLSP1 QUP1 */ - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - flash@0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition@e0000 { - label = "APPSBLENV"; /* uboot env*/ - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition@f0000 { - label = "APPSBL"; /* uboot */ - reg = <0x000f0000 0x00090000>; - read-only; - }; - partition@180000 { - label = "ART"; - reg = <0x00180000 0x00010000>; - read-only; - }; - partition@190000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x00190000 0x14d0000>; - }; - partition@1660000 { - label = "failsafe"; - reg = <0x01660000 0x008F0000>; - read-only; - }; - partition@1f50000 { - label = "u-boot-env"; - reg = <0x01f50000 0x00010000>; - read-only; - }; - partition@1f60000 { - label = "userconfig"; - reg = <0x01f60000 0x000a0000>; - read-only; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "EnGenius-ENS620EXT"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "EnGenius-ENS620EXT"; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex6100v2.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex6100v2.dts deleted file mode 100644 index 2b93dcbb99..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex6100v2.dts +++ /dev/null @@ -1,33 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * Copyright (c) 2018, David Bauer - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4018-ex61x0v2.dtsi" -#include -#include - -/ { - model = "Netgear EX6100v2"; - compatible = "netgear,ex6100v2"; -}; - -&wifi0 { - qcom,ath10k-calibration-variant = "Netgear-EX6100v2"; -}; - -&wifi1 { - qcom,ath10k-calibration-variant = "Netgear-EX6100v2"; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts deleted file mode 100644 index f1c44c1ae8..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts +++ /dev/null @@ -1,33 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * Copyright (c) 2018, David Bauer - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4018-ex61x0v2.dtsi" -#include -#include - -/ { - model = "Netgear EX6150v2"; - compatible = "netgear,ex6150v2"; -}; - -&wifi0 { - qcom,ath10k-calibration-variant = "Netgear-EX6150v2"; -}; - -&wifi1 { - qcom,ath10k-calibration-variant = "Netgear-EX6150v2"; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi deleted file mode 100644 index cc70080c92..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi +++ /dev/null @@ -1,312 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * Copyright (c) 2018, David Bauer - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "Netgear EX61X0v2"; - compatible = "netgear,ex61x0v2"; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - qcom,num_gmac = <1>; - }; - }; - - aliases { - led-boot = &power_amber; - led-failsafe = &power_amber; - led-running = &power_green; - led-upgrade = &power_amber; - label-mac-device = &gmac0; - }; - - keys { - compatible = "gpio-keys"; - - wps { - label = "wps"; - gpios = <&tlmm 0 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - led_spi { - compatible = "spi-gpio"; - #address-cells = <1>; - #size-cells = <0>; - - sck-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; - mosi-gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; - num-chipselects = <0>; - - led_gpio: led_gpio@0 { - compatible = "fairchild,74hc595"; - reg = <0>; - gpio-controller; - #gpio-cells = <2>; - registers-number = <1>; - spi-max-frequency = <1000000>; - }; - }; - - leds { - compatible = "gpio-leds"; - - power_amber: power_amber { - label = "ex61x0v2:amber:power"; - gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>; - }; - - power_green: power_green { - label = "ex61x0v2:green:power"; - gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>; - }; - - right { - label = "ex61x0v2:blue:right"; - gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>; - }; - - left { - label = "ex61x0v2:blue:left"; - gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>; - }; - - client_green { - label = "ex61x0v2:green:client"; - gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>; - }; - - client_red { - label = "ex61x0v2:red:client"; - gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>; - }; - - router_green { - label = "ex61x0v2:green:router"; - gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>; - }; - - router_red { - label = "ex61x0v2:red:router"; - gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>; - }; - - wps { - label = "ex61x0v2:green:wps"; - gpios = <&tlmm 1 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - mx25l12805d@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - - partition1@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - - partition2@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - - partition3@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - - partition4@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - - partition5@E0000 { - label = "APPSBLENV"; - reg = <0x000e0000 0x00010000>; - read-only; - }; - - partition6@F0000 { - label = "APPSBL"; - reg = <0x000f0000 0x00080000>; - read-only; - }; - - partition7@170000 { - label = "ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - - partition8@180000 { - label = "config"; - reg = <0x00180000 0x00010000>; - read-only; - }; - - partition9@190000 { - label = "pot"; - reg = <0x00190000 0x00010000>; - read-only; - }; - - partition10@1a0000 { - label = "dnidata"; - reg = <0x001a0000 0x00010000>; - read-only; - }; - - partition11@1b0000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x001b0000 0x00e10000>; - }; - - partition12@fc0000 { - label = "language"; - reg = <0x00fc0000 0x00040000>; - read-only; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; -}; - -&wifi1 { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts deleted file mode 100644 index b2a32946d9..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts +++ /dev/null @@ -1,292 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "AVM FRITZ!Box 4040"; - compatible = "avm,fritzbox-4040"; - - aliases { - led-boot = &power; - led-failsafe = &flash; - led-running = &power; - led-upgrade = &flash; - label-mac-device = &gmac0; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2@60f8800 { - status = "okay"; - }; - - usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - qca8075: ess-switch@c000000 { - status = "okay"; - - #gpio-cells = <2>; - gpio-controller; - - enable-usb-power { - gpio-hog; - line-name = "enable USB3 power"; - gpios = <7 GPIO_ACTIVE_HIGH>; - output-high; - }; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - wlan { - label = "wlan"; - gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - switch-leds { - compatible = "gpio-leds"; - - wlan { - label = "fritz4040:green:wlan"; - gpios = <&qca8075 1 GPIO_ACTIVE_HIGH>; - }; - - panic: info_red { - label = "fritz4040:red:info"; - gpios = <&qca8075 3 GPIO_ACTIVE_HIGH>; - panic-indicator; - }; - - wan { - label = "fritz4040:green:wan"; - gpios = <&qca8075 5 GPIO_ACTIVE_HIGH>; - }; - - power: power { - label = "fritz4040:green:power"; - gpios = <&qca8075 11 GPIO_ACTIVE_HIGH>; - }; - - lan { - label = "fritz4040:green:lan"; - gpios = <&qca8075 13 GPIO_ACTIVE_HIGH>; - }; - - flash: info_amber { - label = "fritz4040:amber:info"; - gpios = <&qca8075 15 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - mux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - mux_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { /* BLSP1 QUP1 */ - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - status = "okay"; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition1@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition2@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition3@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition4@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition5@e0000 { - label = "APPSBLENV"; /* uboot env - empty */ - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition6@f0000 { - label = "urlader"; /* APPSBL */ - reg = <0x000f0000 0x0002dc000>; - read-only; - }; - partition7@11dc00 { - /* make a backup of this partition! */ - label = "urlader_config"; - reg = <0x0011dc00 0x00002400>; - read-only; - }; - partition8@120000 { - label = "tffs1"; - reg = <0x00120000 0x00080000>; - read-only; - }; - partition9@1a0000 { - label = "tffs2"; - reg = <0x001a0000 0x00080000>; - read-only; - }; - partition10@220000 { - label = "uboot"; - reg = <0x00220000 0x00080000>; - read-only; - }; - partition11@2A0000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x002a0000 0x01c60000>; - }; - partition12@1f00000 { - label = "jffs2"; - reg = <0x01f00000 0x00100000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040"; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts deleted file mode 100644 index 988b86b68d..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts +++ /dev/null @@ -1,9 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -// Copyright (c) 2018, Robert Marko - -#include "qcom-ipq4018-jalapeno.dtsi" - -/ { - model = "8devices Jalapeno"; - compatible = "8dev,jalapeno"; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi deleted file mode 100644 index 3af6de1f60..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi +++ /dev/null @@ -1,269 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -// Copyright (c) 2018, Robert Marko - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - counter@4a1000 { - compatible = "qcom,qca-gcnt"; - reg = <0x4a1000 0x4>; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - status = "okay"; - - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2: usb2@60f8800 { - status = "okay"; - }; - - usb3: usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - - switch_lan_bmp = <0x10>; /* lan port bitmap */ - }; - - edma@c080000 { - status = "okay"; - }; - }; -}; - -&tlmm { - mdio_pins: mdio_pinmux { - pinmux_1 { - pins = "gpio53"; - function = "mdio"; - }; - - pinmux_2 { - pins = "gpio52"; - function = "mdc"; - }; - - pinconf { - pins = "gpio52", "gpio53"; - bias-pull-up; - }; - }; - - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <2>; - bias-disable; - }; - - pin_cs { - function = "gpio"; - pins = "gpio54", "gpio59"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - status = "okay"; - - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>; - - flash@0 { - status = "okay"; - - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - - partition@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - - partition@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - - partition@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - - partition@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - - partition@e0000 { - label = "APPSBLENV"; /* uboot env*/ - reg = <0x000e0000 0x00010000>; - read-only; - }; - - partition@f0000 { - label = "APPSBL"; /* uboot */ - reg = <0x000f0000 0x00080000>; - read-only; - }; - - partition@170000 { - label = "ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - }; - }; - - spi-nand@1 { - status = "okay"; - - compatible = "spi-nand"; - reg = <1>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "ubi"; - reg = <0x00000000 0x08000000>; - }; - }; - }; -}; - -&blsp1_uart1 { - status = "okay"; - - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac0 { - qcom,poll_required = <1>; - qcom,poll_required_dynamic = <1>; - qcom,phy_mdio_addr = <3>; - vlan_tag = <1 0x10>; -}; - -&gmac1 { - qcom,poll_required = <1>; - qcom,poll_required_dynamic = <1>; - qcom,phy_mdio_addr = <4>; - vlan_tag = <2 0x20>; -}; - -&wifi0 { - status = "okay"; - - qcom,ath10k-calibration-variant = "8devices-Jalapeno"; -}; - -&wifi1 { - status = "okay"; - - qcom,ath10k-calibration-variant = "8devices-Jalapeno"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-meshpoint-one.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-meshpoint-one.dts deleted file mode 100644 index 2e21b55325..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-meshpoint-one.dts +++ /dev/null @@ -1,81 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/* Copyright (c) 2019, CRISIS INNOVATION LAB d.o.o. - * Author: Robert Marko - */ - -#include "qcom-ipq4018-jalapeno.dtsi" - -/ { - model = "Crisis Innovation Lab MeshPoint.One"; - compatible = "cilab,meshpoint-one"; - - aliases { - led-boot = &led_status; - led-failsafe = &led_status; - led-running = &led_status; - led-upgrade = &led_status; - }; - - soc { - i2c-gpio { - status = "okay"; - - #address-cells = <1>; - #size-cells = <0>; - - compatible = "i2c-gpio"; - gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) /* sda */ - &tlmm 4 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) /* scl */ - >; - - bme280@76 { - status = "okay"; - - compatible = "bosch,bme280"; - reg = <0x76>; - }; - - pcf2129@51 { - status = "okay"; - - compatible = "nxp,pcf2129"; - reg = <0x51>; - }; - - ina230@40 { - status = "okay"; - - compatible = "ti,ina230"; - reg = <0x40>; - shunt-resistor = <2000>; - }; - - ina230@44 { - status = "okay"; - - compatible = "ti,ina230"; - reg = <0x44>; - shunt-resistor = <2000>; - }; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_status: status { - label = "meshpoint-one:blue:status"; - gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>; - }; - }; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts deleted file mode 100644 index a8c144f928..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts +++ /dev/null @@ -1,337 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include -#include - -/ { - model = "ZyXEL NBG6617"; - compatible = "zyxel,nbg6617"; - - chosen { - /* - * the vendor u-boot adds root and mtdparts cmdline parameters - * which we don't want... but we have to overwrite them or else - * the kernel will take them at face value. - */ - bootargs-append = " mtdparts= root=31:13"; - }; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2@60f8800 { - status = "okay"; - - dwc3@6000000 { - #address-cells = <1>; - #size-cells = <0>; - - usb2_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - }; - }; - - usb3@8af8800 { - status = "okay"; - - dwc3@8a00000 { - #address-cells = <1>; - #size-cells = <0>; - - usb3_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - - usb3_port2: port@2 { - reg = <2>; - #trigger-source-cells = <0>; - }; - }; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - wlan { - label = "wlan"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - linux,code = ; - linux,input-type = ; - }; - - wps { - label = "wps"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - power: power { - label = "nbg6617:green:power"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - }; - - usb { - label = "nbg6617:green:usb"; - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>; - linux,default-trigger = "usbport"; - }; - - wlan2G { - label = "nbg6617:green:wlan2G"; - gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; - }; - - wlan5G { - label = "nbg6617:green:wlan5G"; - gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; - }; - - wps { - label = "nbg6617:green:wps"; - gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - spi_0_pins: spi_0_pinmux { - mux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - mux_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-low; - }; - }; - led_pins: led_pinmux { - mux { - pins = "gpio0", "gpio1", "gpio3", "gpio5", "gpio58"; - drive-strength = <0x8>; - bias-disable; - output-low; - }; - }; -}; - -&blsp1_spi1 { /* BLSP1 QUP1 */ - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - mx25l25635f@0 { - compatible = "mx25l25635f", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - status = "okay"; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition1@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition2@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition3@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition4@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition5@e0000 { - label = "APPSBL"; /* u-boot */ - reg = <0x000e0000 0x00080000>; - /* U-Boot Standalone App "zloader" is located at 0x64000 */ - read-only; - }; - partition6@160000 { - label = "APPSBLENV"; /* u-boot env */ - reg = <0x00160000 0x00010000>; - }; - partition7@170000 { - /* make a backup of this partition! */ - label = "ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - partition8@180000 { - label = "kernel"; - reg = <0x00180000 0x00400000>; - }; - partition9@580000 { - label = "dualflag"; - reg = <0x00580000 0x00010000>; - read-only; - }; - partition10@590000 { - label = "header"; - reg = <0x00590000 0x00010000>; - }; - partition11@5a0000 { - label = "romd"; - reg = <0x005a0000 0x00100000>; - read-only; - }; - partition12@6a0000 { - label = "not_root_data"; - /* - * for some strange reason, someone at ZyXEL - * had the "great" idea to put the rootfs_data - * in front of rootfs... Don't do that! - * As a result this one, full MebiByte remains - * unused. - */ - reg = <0x006a0000 0x00100000>; - }; - partition13@7a0000 { - label = "rootfs"; - reg = <0x007a0000 0x01860000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "ZyXEL-NBG6617"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "ZyXEL-NBG6617"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts deleted file mode 100644 index a0030f77ce..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts +++ /dev/null @@ -1,309 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "ASUS RT-AC58U"; - compatible = "asus,rt-ac58u"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x8000000>; - }; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - chosen { - bootargs-append = " ubi.mtd=UBI_DEV"; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb3@8af8800 { - status = "okay"; - - dwc3@8a00000 { - #address-cells = <1>; - #size-cells = <0>; - - usb3_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - - usb3_port2: port@2 { - reg = <2>; - #trigger-source-cells = <0>; - }; - }; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_power: status { - label = "rt-ac58u:blue:status"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - }; - - wan { - label = "rt-ac58u:blue:wan"; - gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; - }; - - wlan2G { - label = "rt-ac58u:blue:wlan2G"; - gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tpt"; - }; - - wlan5G { - label = "rt-ac58u:blue:wlan5G"; - gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy1tpt"; - }; - - usb { - label = "rt-ac58u:blue:usb"; - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - trigger-sources = <&usb3_port1>, <&usb3_port2>; - linux,default-trigger = "usbport"; - }; - - lan { - label = "rt-ac58u:blue:lan"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - mux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - mux_cs { - function = "gpio"; - pins = "gpio54", "gpio59"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp1_spi1 { /* BLSP1 QUP1 */ - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, - <&tlmm 59 GPIO_ACTIVE_HIGH>; - - flash@0 { - /* - * U-boot looks for "n25q128a11" node, - * if we don't have it, it will spit out the following warning: - * "ipq: fdt fixup unable to find compatible node". - */ - compatible = "jedec,spi-nor"; - reg = <0>; - linux,modalias = "m25p80", "mx25l1606e", "n25q128a11"; - spi-max-frequency = <30000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition@e0000 { - label = "APPSBLENV"; /* uboot env*/ - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition@f0000 { - label = "APPSBL"; /* uboot */ - reg = <0x000f0000 0x00080000>; - read-only; - }; - partition@170000 { - label = "ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - /* 0x00180000 - 0x00200000 unused */ - }; - }; - - spi-nand@1 { - compatible = "spi-nand"; - reg = <1>; - spi-max-frequency = <30000000>; - - /* - * U-boot looks for "spinand,mt29f" node, - * if we don't have it, it will spit out the following warning: - * "ipq: fdt fixup unable to find compatible node". - */ - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - /* - * TODO: change to label = "ubi" once we drop 4.14. - * also drop the bootargs-append and all the - * userspace CI_UBIPART="UBI_DEV" remains. - */ - label = "UBI_DEV"; - reg = <0x00000000 0x08000000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "RT-AC58U"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "RT-AC58U"; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts deleted file mode 100644 index 5932638da0..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts +++ /dev/null @@ -1,265 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * Copyright (c) 2018, David Bauer - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "ZyXEL WRE6606"; - compatible = "zyxel,wre6606"; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - chosen { - bootargs-append = " mtdparts="; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - qcom,num_gmac = <1>; - }; - }; - - leds { - compatible = "gpio-leds"; - - wps { - label = "wre6606:green:wps"; - gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; - }; - - wlan5g_green { - label = "wre6606:green:wlan5g"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - }; - - power: power { - label = "wre6606:green:power"; - gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; - }; - - wlan5g_red { - label = "wre6606:red:wlan5g"; - gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; - }; - - wlan2g_red { - label = "wre6606:red:wlan2g"; - gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; - }; - - wlan2g_green { - label = "wre6606:green:wlan2g"; - gpios = <&tlmm 59 GPIO_ACTIVE_HIGH>; - }; - }; - - keys { - compatible = "gpio-keys"; - - wps { - label = "wps"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - mx25l12805d@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - - partition1@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - - partition2@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - - partition3@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - - partition4@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - - partition5@E0000 { - label = "APPSBLENV"; - reg = <0x000e0000 0x00010000>; - read-only; - }; - - partition6@F0000 { - label = "APPSBL"; - reg = <0x000f0000 0x00080000>; - read-only; - }; - - partition7@170000 { - label = "ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - - partition8@180000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x00180000 0x00ce0000>; - }; - - partition9@e60000 { - label = "manufacture"; - reg = <0x00e60000 0x00050000>; - read-only; - }; - - partition10@eb0000 { - label = "storage"; - reg = <0x00eb0000 0x00150000>; - read-only; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "ZyXEL-WRE6606"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "ZyXEL-WRE6606"; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-a62.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-a62.dts deleted file mode 100644 index 25bbd6b332..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-a62.dts +++ /dev/null @@ -1,243 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * Copyright (c) 2017-2018, Sven Eckelmann - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "OpenMesh A62"; - compatible = "openmesh,a62"; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2: usb2@60f8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - switch_lan_bmp = <0x10>; - switch_wan_bmp = <0x20>; - - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - leds { - compatible = "gpio-leds"; - - red { - label = "a62:red:status"; - gpios = <&tlmm 43 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; - }; - - power: green { - label = "a62:green:status"; - gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; - }; - - blue { - label = "a62:blue:status"; - gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; - }; - }; - - watchdog { - compatible = "linux,wdt-gpio"; - gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; - hw_algo = "toggle"; - /* hw_margin_ms is actually 300s but driver limits it to 60s */ - hw_margin_ms = <60000>; - always-running; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - enable-usb-power { - gpio-hog; - gpios = <58 GPIO_ACTIVE_HIGH>; - output-low; - line-name = "enable USB2 power"; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - /* partitions are passed via bootloader */ - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac0 { - qcom,phy_mdio_addr = <3>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <1 0x10>; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&pcie0 { - status = "okay"; - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi2: wifi@1,0 { - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - qcom,ath10k-calibration-variant = "OM-A62"; - ieee80211-freq-limit = <5170000 5350000>; - }; - }; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "OM-A62"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "OM-A62"; - ieee80211-freq-limit = <5470000 5875000>; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts deleted file mode 100644 index 47202d28fe..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts +++ /dev/null @@ -1,21 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019-ap.dk04.1.dtsi" - -/ { - model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK04.1-C1"; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi deleted file mode 100644 index 9801354625..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi +++ /dev/null @@ -1,181 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019.dtsi" -#include - -/ { - model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1"; - compatible = "qcom,ipq4019"; - - soc { - rng@22000 { - status = "okay"; - }; - - pinctrl@1000000 { - serial_0_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - serial_1_pins: serial1_pinmux { - mux { - pins = "gpio8", "gpio9"; - function = "blsp_uart1"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - }; - pinmux_cs { - function = "gpio"; - pins = "gpio12"; - }; - pinconf { - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - pinconf_cs { - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - i2c_0_pins: i2c_0_pinmux { - pinmux { - function = "blsp_i2c0"; - pins = "gpio10", "gpio11"; - }; - pinconf { - pins = "gpio10", "gpio11"; - drive-strength = <16>; - bias-disable; - }; - }; - - nand_pins: nand_pins { - - pullups { - pins = "gpio52", "gpio53", "gpio58", - "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; - }; - - blsp_dma: dma@7884000 { - status = "okay"; - }; - - spi0: spi@78b5000 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - mx25l25635e@0 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; - compatible = "mx25l25635e"; - spi-max-frequency = <24000000>; - }; - }; - - i2c0: i2c@78b7000 { /* BLSP1 QUP2 */ - pinctrl-0 = <&i2c_0_pins>; - pinctrl-names = "default"; - - status = "okay"; - }; - - serial@78af000 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - serial@78b0000 { - pinctrl-0 = <&serial_1_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - usb3_ss_phy: ssphy@9a000 { - status = "okay"; - }; - - usb3_hs_phy: hsphy@a6000 { - status = "okay"; - }; - - usb3: usb3@8af8800 { - status = "okay"; - }; - - usb2_hs_phy: hsphy@a8000 { - status = "okay"; - }; - - usb2: usb2@60f8800 { - status = "okay"; - }; - - cryptobam: dma@8e04000 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - qpic_bam: dma@7984000 { - status = "okay"; - }; - - nand: qpic-nand@79b0000 { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - }; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts deleted file mode 100644 index f4c1685f47..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts +++ /dev/null @@ -1,354 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "MobiPromo CM520-79F"; - compatible = "mobipromo,cm520-79f"; - - aliases { - led-boot = &led_sys; - led-failsafe = &led_sys; - led-running = &led_sys; - led-upgrade = &led_sys; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; - reset-delay-us = <1000>; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2@60f8800 { - status = "okay"; - - dwc3@6000000 { - #address-cells = <1>; - #size-cells = <0>; - - usb2_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - }; - }; - - usb3@8af8800 { - status = "okay"; - - dwc3@8a00000 { - #address-cells = <1>; - #size-cells = <0>; - - usb3_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - - usb3_port2: port@2 { - reg = <2>; - #trigger-source-cells = <0>; - }; - }; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - led_spi { - compatible = "spi-gpio"; - #address-cells = <1>; - ranges; - - sck-gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>; - mosi-gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>; - num-chipselects = <0>; - - led_gpio: led_gpio@0 { - compatible = "fairchild,74hc595"; - reg = <0>; - gpio-controller; - #gpio-cells = <2>; - registers-number = <1>; - spi-max-frequency = <1000000>; - }; - }; - - leds { - compatible = "gpio-leds"; - - usb { - label = "cm520-79f:blue:usb"; - gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "usbport"; - trigger-sources = <&usb3_port1>, <&usb3_port2>, <&usb2_port1>; - }; - - led_sys: can { - label = "cm520-79f:blue:can"; - gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; - }; - - wan { - label = "cm520-79f:blue:wan"; - gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>; - }; - - lan1 { - label = "cm520-79f:blue:lan1"; - gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>; - }; - - lan2 { - label = "cm520-79f:blue:lan2"; - gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>; - }; - - wlan2g { - label = "cm520-79f:blue:wlan2g"; - gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy0tpt"; - }; - - wlan5g { - label = "cm520-79f:blue:wlan5g"; - gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy1tpt"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - status = "okay"; -}; - -&blsp1_uart2 { - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac0 { - mtd-mac-address = <&art 0x1006>; -}; - -&gmac1 { - mtd-mac-address = <&art 0x5006>; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x0 0x100000>; - read-only; - }; - - partition@100000 { - label = "MIBIB"; - reg = <0x100000 0x100000>; - read-only; - }; - - partition@200000 { - label = "BOOTCONFIG"; - reg = <0x200000 0x100000>; - }; - - partition@300000 { - label = "QSEE"; - reg = <0x300000 0x100000>; - read-only; - }; - - partition@400000 { - label = "QSEE_1"; - reg = <0x400000 0x100000>; - read-only; - }; - - partition@500000 { - label = "CDT"; - reg = <0x500000 0x80000>; - read-only; - }; - - partition@580000 { - label = "CDT_1"; - reg = <0x580000 0x80000>; - read-only; - }; - - partition@600000 { - label = "BOOTCONFIG1"; - reg = <0x600000 0x80000>; - }; - - partition@680000 { - label = "APPSBLENV"; - reg = <0x680000 0x80000>; - }; - - partition@700000 { - label = "APPSBL"; - reg = <0x700000 0x200000>; - read-only; - }; - - partition@900000 { - label = "APPSBL_1"; - reg = <0x900000 0x200000>; - read-only; - }; - - art: partition@b00000 { - label = "ART"; - reg = <0xb00000 0x80000>; - read-only; - }; - - partition@b80000 { - label = "ubi"; - reg = <0xb80000 0x7480000>; - }; - }; - }; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio52", "gpio53", "gpio58", - "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "CM520-79F"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "CM520-79F"; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c1.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c1.dts deleted file mode 100644 index df1df2529a..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c1.dts +++ /dev/null @@ -1,80 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT - * - * Copyright (c) 2018 Peng Zhang - * - */ - -#include "qcom-ipq4019-e2600ac.dtsi" -#include -#include - -/ { - model = "Qxwlan E2600AC c1"; - compatible = "qxwlan,e2600ac-c1"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; - - flash@0 { - reg = <0>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - partition@40000 { - label = "0:MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - partition@60000 { - label = "0:QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - partition@c0000 { - label = "0:CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - partition@d0000 { - label = "0:DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - partition@e0000 { - label = "0:APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - partition@f0000 { - label = "0:APPSBL"; - reg = <0xf0000 0x80000>; - read-only; - }; - partition@170000 { - label = "0:ART"; - reg = <0x170000 0x10000>; - read-only; - }; - partition@180000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x180000 0x1e80000>; - }; - }; - }; -}; - diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c2.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c2.dts deleted file mode 100644 index 9348ef4eec..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c2.dts +++ /dev/null @@ -1,115 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT - * - * Copyright (c) 2018 Peng Zhang - * - */ - -#include "qcom-ipq4019-e2600ac.dtsi" -#include -#include - -/ { - model = "Qxwlan E2600AC c2"; - compatible = "qxwlan,e2600ac-c2"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; - - flash@0 { - reg = <0>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - partition@40000 { - label = "0:MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - partition@60000 { - label = "0:QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - partition@c0000 { - label = "0:CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - partition@d0000 { - label = "0:DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - partition@e0000 { - label = "0:APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - partition@f0000 { - label = "0:APPSBL"; - reg = <0xf0000 0x80000>; - read-only; - }; - partition@170000 { - label = "0:ART"; - reg = <0x170000 0x10000>; - read-only; - }; - }; - }; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "ubi"; - reg = <0x00000000 0x04000000>; - }; - }; - }; -}; - -&tlmm { - nand_pins: nand-pins { - - pullups { - pins = "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; -}; - diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi deleted file mode 100644 index f4af2ba25f..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi +++ /dev/null @@ -1,266 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT - * - * Copyright (c) 2018 Peng Zhang - * - */ - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - - model = "Qxwlan E2600AC"; - compatible = "qcom,ipq4019"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; /* 256MB */ - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - status = "okay"; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2: usb2@60f8800 { - status = "okay"; - - dwc3@6000000 { - #address-cells = <1>; - #size-cells = <0>; - - usb2_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - }; - }; - - serial@78af000 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - serial@78b0000 { - pinctrl-0 = <&serial_1_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - i2c@78b7000 { /* BLSP1 QUP2 */ - pinctrl-0 = <&i2c_0_pins>; - pinctrl-names = "default"; - - status = "okay"; - }; - - usb3: usb3@8af8800 { - status = "okay"; - - dwc3@8a00000 { - #address-cells = <1>; - #size-cells = <0>; - - usb3_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - - usb3_port2: port@2 { - reg = <2>; - #trigger-source-cells = <0>; - }; - }; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - - leds { - compatible = "gpio-leds"; - - led1 { - label = "e2600ac:green:wlan0"; - gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; - }; - - led2 { - label = "e2600ac:green:wlan1"; - gpios = <&tlmm 36 GPIO_ACTIVE_LOW>; - }; - - led3 { - label = "e2600ac:green:usb"; - gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; - trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>; - linux,default-trigger = "usbport"; - }; - - led4 { - label = "e2600ac:green:ctrl1"; - gpios = <&tlmm 51 GPIO_ACTIVE_LOW>; - }; - - led5 { - label = "e2600ac:green:ctrl2"; - gpios = <&tlmm 30 GPIO_ACTIVE_LOW>; - }; - - led6 { - label = "e2600ac:green:ctrl3"; - gpios = <&tlmm 31 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - i2c_0_pins: i2c-0-pinmux { - mux { - pins = "gpio20", "gpio21"; - function = "blsp_i2c0"; - bias-disable; - }; - }; - - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial_0_pins: serial0-pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - serial_1_pins: serial1_pinmux { - mux { - pins = "gpio8", "gpio9"; - function = "blsp_uart1"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - pinmux_cs { - function = "gpio"; - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "Qxwlan-E2600AC"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "Qxwlan-E2600AC"; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-ea8300.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-ea8300.dts deleted file mode 100644 index cfc3037fb2..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-ea8300.dts +++ /dev/null @@ -1,399 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -/* - * Device Tree Source for Linksys EA8300 (Dallas) - * - * Copyright (C) 2019 Jeff Kletsky - * - */ - -/dts-v1/; - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "Linksys EA8300 (Dallas)"; - compatible = "linksys,ea8300", "qcom,ipq4019"; - - - aliases { - led-boot = &led_wps_amber; - led-failsafe = &led_wps; - led-running = &led_linksys; - led-upgrade = &led_world; - serial0 = &blsp1_uart1; - }; - - - leds { - compatible = "gpio-leds"; - - // Retain node names from running OEM on EA8300 - - // Front panel LEDs, top to bottom - - led_plug: diag { - label = "ea8300:amber:plug"; - gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; - }; - - led_world: internet { - label = "ea8300:amber:world"; - gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>; - }; - - led_wps: wps { - label = "ea8300:white:wps"; - gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; - }; - - led_wps_amber: wps_amber { - label = "ea8300:amber:wps"; - gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>; - panic-indicator; - }; - - led_linksys: pwr { - label = "ea8300:white:linksys"; - gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; - }; - - // On back panel, above USB socket - - led_usb: usb { - label = "ea8300:green:usb"; - gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; - trigger-sources = <&usb3_port1>, <&usb3_port2>, - <&usb2_port1>; - linux,default-trigger = "usbport"; - }; - }; - - - keys { - compatible = "gpio-keys"; - - button@0 { - label = "reset"; - linux,code = ; - gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; - }; - - button@1 { - label = "wps"; - linux,code = ; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - }; - }; - - - // - // OEM U-Boot provides either - // init=/sbin/init rootfstype=ubifs ubi.mtd=11,2048 \ - // root=ubi0:ubifs rootwait rw - // or the same with ubi.mtd=13,2048 - // - - chosen { - bootargs-append = " root=/dev/ubiblock0_0 rootfstype=squashfs ro"; - }; - - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2@60f8800 { - status = "okay"; - - dwc3@6000000 { - #address-cells = <1>; - #size-cells = <0>; - - usb2_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - }; - }; - - usb3@8af8800 { - status = "okay"; - - dwc3@8a00000 { - #address-cells = <1>; - #size-cells = <0>; - - usb3_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - - usb3_port2: port@2 { - reg = <2>; - #trigger-source-cells = <0>; - }; - }; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; -}; - - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - status = "okay"; - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - -}; - -&cryptobam { - status = "okay"; -}; - -&nand { - status = "okay"; - - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "sbl1"; - reg = <0x0 0x100000>; - read-only; - }; - - partition@100000 { - label = "mibib"; - reg = <0x100000 0x100000>; - read-only; - }; - - partition@200000 { - label = "qsee"; - reg = <0x200000 0x100000>; - read-only; - }; - - partition@300000 { - label = "cdt"; - reg = <0x300000 0x80000>; - read-only; - }; - - partition@380000 { - label = "appsblenv"; - reg = <0x380000 0x80000>; - read-only; - }; - - partition@400000 { - label = "ART"; - reg = <0x400000 0x80000>; - read-only; - }; - - partition@480000 { - label = "appsbl"; - reg = <0x480000 0x200000>; - read-only; - }; - - partition@680000 { - label = "u_env"; - reg = <0x680000 0x80000>; - // writable -- U-Boot environment - }; - - partition@700000 { - label = "s_env"; - reg = <0x700000 0x40000>; - // writable -- Boot counter records - }; - - partition@740000 { - label = "devinfo"; - reg = <0x740000 0x40000>; - read-only; - }; - - partition@780000 { - label = "kernel"; - reg = <0x780000 0x5800000>; - }; - - partition@a80000 { - label = "rootfs"; - reg = <0xa80000 0x5500000>; - }; - - partition@5f80000 { - label = "alt_kernel"; - reg = <0x5f80000 0x5800000>; - }; - - partition@6280000 { - label = "alt_rootfs"; - reg = <0x6280000 0x5500000>; - }; - - partition@b780000 { - label = "sysdiag"; - reg = <0xb780000 0x100000>; - read-only; - }; - - partition@b880000 { - label = "syscfg"; - reg = <0xb880000 0x4680000>; - read-only; - }; - }; - }; -}; - -&pcie0 { - status = "okay"; - - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi2: wifi@1,0 { - compatible = "qcom,ath10k"; - reg = <0x00010000 0 0 0 0>; - }; - }; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - serial_0_pins: serial0-pinmux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - // gpio61 controls led_usb - - pulldowns { - pins = "gpio55", "gpio56", "gpio57", - "gpio60", "gpio62", "gpio63", - "gpio64", "gpio65", "gpio66", - "gpio67", "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "linksys-ea8300-fcc"; -}; - -&wifi1 { - status = "okay"; - ieee80211-freq-limit = <5170000 5330000>; - qcom,ath10k-calibration-variant = "linksys-ea8300-fcc"; -}; - -&wifi2 { - status = "okay"; - ieee80211-freq-limit = <5490000 5835000>; - qcom,ath10k-calibration-variant = "linksys-ea8300-fcc"; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts deleted file mode 100644 index ec3ce447cc..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts +++ /dev/null @@ -1,282 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include - -/ { - model = "EnGenius EAP2200"; - compatible = "engenius,eap2200"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - keys { - compatible = "gpio-keys"; - - wps { - label = "wps"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_power: power { - label = "eap2200:amber:power"; - gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; - }; - - lan1 { - label = "eap2200:blue:lan1"; - gpios = <&tlmm 44 GPIO_ACTIVE_LOW>; - }; - - lan2 { - label = "eap2200:blue:lan2"; - gpios = <&tlmm 45 GPIO_ACTIVE_LOW>; - }; - - wlan2g { - label = "eap2200:blue:wlan2g"; - gpios = <&tlmm 46 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy0tpt"; - }; - - wlan5g { - label = "eap2200:yellow:wlan5g"; - gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy1tpt"; - }; - - wlan5g2 { - label = "eap2200:yellow:wlan5g2"; - gpios = <&tlmm 48 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy2tpt"; - }; - - mode { - label = "eap2200:blue:mode"; - gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; - }; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - switch_lan_bmp = <0x10>; - }; - - edma@c080000 { - status = "okay"; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "0:SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition1@40000 { - label = "0:MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition2@60000 { - label = "0:QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition3@c0000 { - label = "0:CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition4@d0000 { - label = "0:DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition5@e0000 { - label = "0:APPSBLENV"; - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition6@f0000 { - label = "0:APPSBL"; - reg = <0x000f0000 0x00080000>; - read-only; - }; - partition7@170000 { - label = "0:ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac0 { - vlan_tag = <1 0x10>; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "rootfs1"; - reg = <0x00000000 0x04000000>; - }; - partition@40000000 { - label = "ubi"; - reg = <0x04000000 0x04000000>; - }; - - }; - }; -}; - -&pcie0 { - status = "okay"; - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi2: wifi@1,0 { - compatible = "qcom,ath10k"; - reg = <0x00010000 0 0 0 0>; - ieee80211-freq-limit = <5470000 5875000>; - qcom,ath10k-calibration-variant = "EnGenius-EAP2200"; - }; - }; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - nand_pins: nand_pins { - pullups { - pins = "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; - - serial_0_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - pinmux_cs { - function = "gpio"; - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "EnGenius-EAP2200"; -}; - -&wifi1 { - status = "okay"; - ieee80211-freq-limit = <5170000 5350000>; - qcom,ath10k-calibration-variant = "EnGenius-EAP2200"; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts deleted file mode 100644 index b04a61dc04..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts +++ /dev/null @@ -1,303 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "AVM FRITZ!Box 7530"; - compatible = "avm,fritzbox-7530"; - - aliases { - led-boot = &power_green; - led-failsafe = &info_red; - led-running = &power_green; - led-upgrade = &info_green; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - qcom,num_gmac = <1>; - }; - }; - - keys { - compatible = "gpio-keys"; - - wlan { - label = "wlan"; - gpios = <&tlmm 42 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&tlmm 41 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - dect { - label = "dect"; - gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - info_red: info_red { - label = "fritzbox-7530:red:info"; - gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; - }; - - info_green: info { - label = "fritzbox-7530:green:info"; - gpios = <&tlmm 33 GPIO_ACTIVE_LOW>; - }; - - wlan { - label = "fritzbox-7530:green:wlan"; - gpios = <&tlmm 34 GPIO_ACTIVE_LOW>; - }; - - fon { - label = "fritzbox-7530:green:fon"; - gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; - }; - - power_green: power { - label = "fritzbox-7530:green:power"; - gpios = <&tlmm 39 GPIO_ACTIVE_LOW>; - }; - - wps { - label = "fritzbox-7530:green:wps"; - gpios = <&tlmm 45 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&tlmm { - serial_0_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; - - usb-power { - line-name = "enable USB3 power"; - gpios = <49 GPIO_ACTIVE_HIGH>; - gpio-hog; - output-high; - }; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x000000 0x80000>; - read-only; - }; - - partition@80000 { - label = "MIBIB"; - reg = <0x080000 0x80000>; - read-only; - }; - - partition@100000 { - label = "QSEE"; - reg = <0x100000 0x80000>; - read-only; - }; - - partition@180000 { - label = "CDT"; - reg = <0x180000 0x40000>; - read-only; - }; - - partition@1c0000 { - label = "QSEE_B"; - reg = <0x1c0000 0x80000>; - read-only; - }; - - partition@240000 { - label = "urlader0"; - reg = <0x240000 0x40000>; - read-only; - }; - - partition@280000 { - label = "urlader1"; - reg = <0x280000 0x40000>; - read-only; - }; - - partition@2c0000 { - label = "nand-tffs"; - reg = <0x2c0000 0x840000>; - read-only; - }; - - partition@b00000 { - /* 'kernel1' in AVM firmware */ - label = "uboot0"; - reg = <0xb00000 0x400000>; - }; - - partition@f00000 { - /* 'kernel2' in AVM firmware */ - label = "uboot1"; - reg = <0xf00000 0x400000>; - }; - - partition@1300000 { - label = "ubi"; - reg = <0x1300000 0x6d00000>; - }; - }; - }; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "AVM-FRITZBox-7530"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "AVM-FRITZBox-7530"; -}; - -&pcie0 { - status = "okay"; - - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - dsl@1,0 { - compatible = "intel,vrx518"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - }; - }; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts deleted file mode 100644 index e9b96b996a..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts +++ /dev/null @@ -1,267 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "AVM FRITZ!Repeater 1200"; - compatible = "avm,fritzrepeater-1200"; - - aliases { - led-boot = &power_green; - led-failsafe = &power_red; - led-running = &power_green; - led-upgrade = &power_red; - label-mac-device = &wifi0; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */ - switch_lan_bmp = <0x0>; /* lan port bitmap */ - switch_wan_bmp = <0x10>; /* wan port bitmap */ - }; - - edma@c080000 { - status = "okay"; - phy-mode = "rgmii-rxid"; - qcom,num_gmac = <1>; - qcom,single-phy; - }; - }; - - key { - compatible = "gpio-keys"; - - wps { - label = "WPS button"; - gpios = <&tlmm 10 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - power_red: power_red { - label = "fritzwlan-1200:red:power"; - gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; - }; - - power_green: power_green { - label = "fritzwlan-1200:green:power"; - gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; - }; - - power_yellow { - label = "fritzwlan-1200:yellow:power"; - gpios = <&tlmm 49 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&tlmm { - serial_0_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; - - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - phy-reset { - line-name = "PHY-reset"; - gpios = <19 GPIO_ACTIVE_HIGH>; - gpio-hog; - output-high; - }; - - phy-reset-2 { - line-name = "PHY-reset-2"; - gpios = <47 GPIO_ACTIVE_HIGH>; - gpio-hog; - output-high; - }; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x0 0x80000>; - read-only; - }; - - partition@80000 { - label = "MIBIB"; - reg = <0x80000 0x80000>; - read-only; - }; - - partition@100000 { - label = "QSEE"; - reg = <0x100000 0x80000>; - read-only; - }; - - partition@180000 { - label = "CDT"; - reg = <0x180000 0x40000>; - read-only; - }; - - partition@1c0000 { - label = "QSEE_B"; - reg = <0x1c0000 0x80000>; - read-only; - }; - - partition@240000 { - label = "urlader0"; - reg = <0x240000 0x40000>; - read-only; - }; - - partition@280000 { - label = "urlader1"; - reg = <0x280000 0x40000>; - read-only; - }; - - partition@2c0000 { - label = "nand-tffs"; - reg = <0x2c0000 0x840000>; - read-only; - }; - - partition@b00000 { - /* 'kernel1' in AVM firmware */ - label = "uboot0"; - reg = <0xb00000 0x400000>; - }; - - partition@f00000 { - /* 'kernel2' in AVM firmware */ - label = "uboot1"; - reg = <0xf00000 0x400000>; - }; - - partition@1300000 { - label = "ubi"; - reg = <0x1300000 0x6d00000>; - }; - }; - }; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200"; -}; - -&gmac0 { - qcom,phy_mdio_addr = <0>; - qcom,poll_required = <1>; - vlan_tag = <0 0x20>; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts deleted file mode 100644 index 6914917eb3..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts +++ /dev/null @@ -1,264 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "AVM FRITZ!Repeater 3000"; - compatible = "avm,fritzrepeater-3000"; - - aliases { - led-boot = &power_led; - led-failsafe = &power_led; - led-running = &power_led; - led-upgrade = &power_led; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - - switch_lan_bmp = <0x10>; - switch_wan_bmp = <0x20>; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - key { - compatible = "gpio-keys"; - - connect { - label = "Connect"; - gpios = <&tlmm 10 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - connect_red { - label = "fritzwlan-3000:red:connect"; - gpios = <&tlmm 30 GPIO_ACTIVE_LOW>; - }; - - connect_green { - label = "fritzwlan-3000:green:connect"; - gpios = <&tlmm 31 GPIO_ACTIVE_LOW>; - }; - - connect_blue { - label = "fritzwlan-3000:blue:connect"; - gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; - }; - - power_led: power { - label = "fritzwlan-3000:green:power"; - gpios = <&tlmm 33 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&tlmm { - serial_0_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x000000 0x80000>; - read-only; - }; - - partition@80000 { - label = "MIBIB"; - reg = <0x080000 0x80000>; - read-only; - }; - - partition@100000 { - label = "QSEE"; - reg = <0x100000 0x80000>; - read-only; - }; - - partition@180000 { - label = "CDT"; - reg = <0x180000 0x40000>; - read-only; - }; - - partition@1c0000 { - label = "QSEE_B"; - reg = <0x1c0000 0x80000>; - read-only; - }; - - partition@240000 { - label = "urlader0"; - reg = <0x240000 0x40000>; - read-only; - }; - - partition@280000 { - label = "urlader1"; - reg = <0x280000 0x40000>; - read-only; - }; - - partition@2c0000 { - label = "nand-tffs"; - reg = <0x2c0000 0x840000>; - read-only; - }; - - partition@b00000 { - /* 'kernel1' in AVM firmware */ - label = "uboot0"; - reg = <0xb00000 0x400000>; - }; - - partition@f00000 { - /* 'kernel2' in AVM firmware */ - label = "uboot1"; - reg = <0xf00000 0x400000>; - }; - - partition@1300000 { - label = "ubi"; - reg = <0x1300000 0x6d00000>; - }; - }; - }; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - /* BDFs are identical for the FRITZ!Box 7530 and the FRITZ!Repeater 3000 */ - qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-3000"; -}; - -&wifi1 { - status = "okay"; - ieee80211-freq-limit = <5170000 5350000>; - /* BDFs are identical for the FRITZ!Box 7530 and the FRITZ!Repeater 3000 */ - qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-3000"; -}; - -&pcie0 { - status = "okay"; - - perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - /* QCA9984 */ - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - ieee80211-freq-limit = <5470000 5875000>; - /* Uses the reference BDF */ - }; - }; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts deleted file mode 100644 index 8fe7644a9b..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts +++ /dev/null @@ -1,357 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/* Copyright (c) 2019, Robert Marko */ - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "8devices Habanero DVK"; - compatible = "8dev,habanero-dvk"; - - aliases { - led-boot = &led_status; - led-failsafe = &led_status; - led-running = &led_status; - led-upgrade = &led_upgrade; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - counter@4a1000 { - compatible = "qcom,qca-gcnt"; - reg = <0x4a1000 0x4>; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - status = "okay"; - - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2: usb2@60f8800 { - status = "okay"; - }; - - usb3: usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_status: status { - label = "habanero-dvk:green:status"; - gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; - panic-indicator; - }; - - led_upgrade: upgrade { - label = "habanero-dvk:green:upgrade"; - gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>; - }; - - wlan2g { - label = "habanero-dvk:green:wlan2g"; - gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tpt"; - }; - - wlan5g { - label = "habanero-dvk:green:wlan5g"; - gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy1tpt"; - }; - }; -}; - -&vqmmc { - status = "okay"; -}; - -&sdhci { - status = "okay"; - - pinctrl-0 = <&sd_pins>; - pinctrl-names = "default"; - cd-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>; - vqmmc-supply = <&vqmmc>; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - - pinmux_cs { - function = "gpio"; - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio52", "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", "gpio57", - "gpio60", "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", "gpio68", - "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; - - sd_pins: sd_pins { - pinmux { - function = "sdio"; - pins = "gpio23", "gpio24", "gpio25", "gpio26", - "gpio28", "gpio29", "gpio30", "gpio31"; - drive-strength = <10>; - }; - - pinmux_sd_clk { - function = "sdio"; - pins = "gpio27"; - drive-strength = <16>; - }; - - pinmux_sd7 { - function = "sdio"; - pins = "gpio32"; - drive-strength = <10>; - bias-disable; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - status = "okay"; - - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - spi-max-frequency = <24000000>; - reg = <0>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition@e0000 { - label = "APPSBLENV"; /* uboot env */ - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition@f0000 { - label = "APPSBL"; /* uboot */ - reg = <0x000f0000 0x00080000>; - read-only; - }; - partition@170000 { - label = "ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - partition@180000 { - label = "cfg"; - reg = <0x00180000 0x00040000>; - }; - partition@1c0000 { - label = "firmware"; - compatible = "denx,fit"; - reg = <0x001c0000 0x01e40000>; - }; - }; - }; -}; - -/* Some DVK boards ship without NAND */ -&nand { - status = "okay"; - - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; -}; - -&blsp1_uart1 { - status = "okay"; - - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; -}; - -&cryptobam { - status = "okay"; -}; - -&pcie0 { - status = "okay"; - - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - - /* Free slot for use */ - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - }; -}; - -&wifi0 { - status = "okay"; - - qcom,ath10k-calibration-variant = "8devices-Habanero"; -}; - -&wifi1 { - status = "okay"; - - qcom,ath10k-calibration-variant = "8devices-Habanero"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts deleted file mode 100644 index a063f8e952..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts +++ /dev/null @@ -1,311 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT -/dts-v1/; - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "ASUS Lyra MAP-AC2200"; - compatible = "asus,map-ac2200"; - - aliases { - led-boot = &led_blue0; - led-failsafe = &led_red0; - led-running = &led_blue0; - led-upgrade = &led_red0; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2@60f8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 34 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x0 0x80000>; - read-only; - }; - - partition@80000 { - label = "MIBIB"; - reg = <0x80000 0x80000>; - read-only; - }; - - partition@100000 { - label = "QSEE"; - reg = <0x100000 0x100000>; - read-only; - }; - - partition@200000 { - label = "CDT"; - reg = <0x200000 0x80000>; - read-only; - }; - - partition@280000 { - label = "APPSBL"; - reg = <0x280000 0x140000>; - read-only; - }; - - partition@3c0000 { - label = "APPSBLENV"; - reg = <0x3c0000 0x40000>; - read-only; - }; - - partition@400000 { - label = "ubi"; - reg = <0x400000 0x7c00000>; - }; - }; - }; -}; - -&tlmm { - i2c_0_pins: i2c_0_pinmux { - pinmux { - function = "blsp_i2c0"; - pins = "gpio20", "gpio21"; - drive-strength = <16>; - bias-disable; - }; - }; - - serial_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio52", "gpio53", "gpio58", - "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200"; - ieee80211-freq-limit = <5470000 5875000>; -}; - -&pcie0 { - status = "okay"; - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi2: wifi@1,0 { - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200"; - ieee80211-freq-limit = <5170000 5350000>; - }; - }; -}; - -&usb2_hs_phy { - /* Bluetooth module attached via USB */ - status = "okay"; -}; - -&blsp1_i2c3 { - pinctrl-0 = <&i2c_0_pins>; - pinctrl-names = "default"; - status = "okay"; - - led-controller@32 { - /* 9-channel RGB LED controller */ - compatible = "national,lp5523"; - reg = <0x32>; - clock-mode = [01]; - - led_blue0: blue0 { - chan-name = "blue0"; - label = "map-ac2200:blue:chan0"; - led-cur = [fa]; - max-cur = [ff]; - }; - - blue1 { - chan-name = "blue1"; - label = "map-ac2200:blue:chan1"; - led-cur = [fa]; - max-cur = [ff]; - }; - - blue2 { - chan-name = "blue2"; - label = "map-ac2200:blue:chan2"; - led-cur = [fa]; - max-cur = [ff]; - }; - - led_green0: green0 { - chan-name = "green0"; - label = "map-ac2200:green:chan0"; - led-cur = [fa]; - max-cur = [ff]; - }; - - green1 { - chan-name = "green1"; - label = "map-ac2200:green:chan1"; - led-cur = [fa]; - max-cur = [ff]; - }; - - green2 { - chan-name = "green2"; - label = "map-ac2200:green:chan2"; - led-cur = [fa]; - max-cur = [ff]; - }; - - led_red0: red0 { - chan-name = "red0"; - label = "map-ac2200:red:chan0"; - led-cur = [fa]; - max-cur = [ff]; - }; - - red1 { - chan-name = "red1"; - label = "map-ac2200:red:chan1"; - led-cur = [fa]; - max-cur = [ff]; - }; - - red2 { - chan-name = "red2"; - label = "map-ac2200:red:chan2"; - led-cur = [fa]; - max-cur = [ff]; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts deleted file mode 100644 index 2f17424e55..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts +++ /dev/null @@ -1,385 +0,0 @@ -// SPDX-License-Identifier: ISC -// Copyright (c) 2015, The Linux Foundation. All rights reserved. -// Copyright (c) 2019, Cezary Jackiewicz . -// Copyright (c) 2020, Pawel Dembicki . - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "Cell C RTL30VW"; - compatible = "cellc,rtl30vw"; - - aliases { - led-boot = &led_power_blue; - led-failsafe = &led_power_red; - led-running = &led_power_blue; - led-upgrade = &led_power_red; - }; - - chosen { - bootargs-append = "ubi.mtd=ubifs root=/dev/ubiblock0_0 rootfstype=squashfs ro"; - }; - - led_spi { - compatible = "spi-gpio"; - #address-cells = <1>; - #size-cells = <0>; - num-chipselects = <1>; - - mosi-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; - cs-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; - sck-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; - - led_gpio: led_gpio@0 { - compatible = "fairchild,74hc595"; - reg = <0>; - gpio-controller; - #gpio-cells = <2>; - registers-number = <2>; - spi-max-frequency = <1000000>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_power_blue: power_blue { - gpios = <&led_gpio 0 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:power"; - default-state = "on"; - }; - - led_power_red: power_red { - gpios = <&led_gpio 1 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:red:power"; - }; - - tp28 { - gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>; - label = "rtl30vw:ext:tp28"; - default-state = "keep"; - }; - - tp27 { - gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>; - label = "rtl30vw:ext:tp27"; - default-state = "keep"; - }; - - wlan2g { - gpios = <&led_gpio 8 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:wlan2g"; - linux,default-trigger = "phy0tpt"; - }; - - wlan5g { - gpios = <&led_gpio 9 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:wlan5g"; - linux,default-trigger = "phy1tpt"; - }; - - wps { - gpios = <&led_gpio 10 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:wps"; - }; - - voip { - gpios = <&led_gpio 11 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:voip"; - }; - - s1 { - gpios = <&led_gpio 12 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:s1"; - }; - - s2 { - gpios = <&led_gpio 13 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:s2"; - }; - - s3 { - gpios = <&led_gpio 14 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:s3"; - }; - - s4 { - gpios = <&led_gpio 15 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:s4"; - }; - - signal { - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:red:signal"; - }; - }; - - keys { - compatible = "gpio-keys"; - - wps { - label = "wps"; - linux,code = ; - gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; - }; - - reset { - label = "reset"; - linux,code = ; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - }; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - status = "okay"; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2@60f8800 { - status = "okay"; - }; - - usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>; - - flash@0 { - /*"n25q128a11" is required for proper nand recognition in u-boot. */ - compatible = "jedec,spi-nor", "n25q128a11"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "0:MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - - partition@60000 { - label = "0:QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - - partition@c0000 { - label = "0:CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - - partition@d0000 { - label = "0:DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - - partition@e0000 { - label = "0:APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - - partition@f0000 { - label = "0:APPSBL"; - reg = <0xf0000 0x80000>; - read-only; - }; - - partition@170000 { - label = "0:ART"; - reg = <0x170000 0x10000>; - read-only; - }; - - partition@180000 { - label = "0:BOOTCONFIG"; - reg = <0x180000 0x10000>; - read-only; - }; - }; - }; - - flash@1 { - /* - * Factory U-boot looks in 0:BOOTCONFIG partition for active - * partitions settings and mangle partition config. So kernel - * /kernel_1 and rootfs/rootfs_1 pairs can be swaped. - * It isn't a problem but we never can be sure where OFW put - * factory images. "spinand,mt29f" value is required for proper - * nand recognition in u-boot. - */ - compatible = "spi-nand","spinand,mt29f"; - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "kernel"; - reg = <0x0 0x400000>; - }; - - partition@400000 { - label = "rootfs"; - reg = <0x400000 0x2000000>; - }; - - partition@2400000 { - label = "kernel_1"; - reg = <0x2400000 0x400000>; - }; - - partition@2800000 { - label = "rootfs_1"; - reg = <0x2800000 0x2000000>; - }; - - partition@4800000 { - label = "ubifs"; - reg = <0x4800000 0x3800000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - pinmux_cs { - function = "gpio"; - pins = "gpio54", "gpio59"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "cellc,rtl30vw"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "cellc,rtl30vw"; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-u4019-32m.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-u4019-32m.dts deleted file mode 100644 index 63fbfb65c1..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-u4019-32m.dts +++ /dev/null @@ -1,79 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -/dts-v1/; - -#include "qcom-ipq4019-u4019.dtsi" -#include -#include - -/ { - model = "Unielec U4019 (32M)"; - compatible = "unielec,u4019-32m","unielec,u4019","qcom,ipq4019"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; - - flash@0 { - reg = <0>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <24000000>; - broken-flash-reset; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - partition@40000 { - label = "0:MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - partition@60000 { - label = "0:QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - partition@c0000 { - label = "0:CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - partition@d0000 { - label = "0:DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - partition@e0000 { - label = "0:APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - partition@f0000 { - label = "0:APPSBL"; - reg = <0xf0000 0x80000>; - read-only; - }; - partition@170000 { - label = "0:ART"; - reg = <0x170000 0x10000>; - read-only; - }; - partition@180000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x180000 0x1e80000>; - }; - }; - }; -}; - diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi deleted file mode 100644 index c768e25ca0..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi +++ /dev/null @@ -1,224 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - compatible = "unielec,u4019","qcom,ipq4019"; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; - reset-delay-us = <2000>; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - status = "okay"; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2@60f8800 { - status = "okay"; - - dwc3@6000000 { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - }; - }; - - usb3@8af8800 { - status = "okay"; - - dwc3@8a00000 { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - - port@2 { - reg = <2>; - #trigger-source-cells = <0>; - }; - }; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - - aliases { - led-boot = &led_status; - led-failsafe = &led_status; - led-running = &led_status; - led-upgrade = &led_status; - serial0 = &blsp1_uart1; - serial1 = &blsp1_uart2; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - led_status: led2 { - label = "u4019:green:led2"; - gpios = <&tlmm 68 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&blsp1_uart2 { - pinctrl-0 = <&serial_1_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial_0_pins: serial0-pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - serial_1_pins: serial1_pinmux { - mux { - pins = "gpio8", "gpio9"; - function = "blsp_uart1"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - - pinmux_cs { - function = "gpio"; - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - led_pins: led_pinmux { - mux { - function = "gpio"; - pins = "gpio68"; - bias-disabled; - output-low; - }; - }; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; -}; - -&wifi1 { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts deleted file mode 100644 index 3a0e0b8cfa..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts +++ /dev/null @@ -1,375 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * Copyright (c) 2019, Nguyen Dinh Phi - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "Compex WPJ419"; - compatible = "compex,wpj419", "qcom,ipq4019"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - reserved-memory { - ranges; - rsvd1@87000000 { - /* Reserved for other subsystem */ - reg = <0x87000000 0x500000>; - no-map; - }; - wifi_dump@87500000 { - reg = <0x87500000 0x600000>; - no-map; - }; - - rsvd2@87B00000 { - /* Reserved for other subsystem */ - reg = <0x87B00000 0x500000>; - no-map; - }; - }; - - chosen { - bootargs-append = " ubi.mtd=ubi root=/dev/ubiblock0_1 clk_ignore_unused"; - }; - - soc { - pinctrl@1000000 { - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial_0_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - serial_1_pins: serial1_pinmux { - mux { - pins = "gpio8", "gpio9", "gpio10", "gpio11"; - function = "blsp_uart1"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - bias-disable; - }; - - pinmux_cs { - function = "gpio"; - pins = "gpio12"; - bias-disable; - output-high; - }; - }; - - i2c_0_pins: i2c_0_pinmux { - mux { - pins = "gpio20", "gpio21"; - function = "blsp_i2c0"; - bias-disable; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio52", "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; - - led_0_pins: led0_pinmux { - mux_1 { - pins = "gpio36"; - function = "led0"; - bias-pull-down; - }; - mux_2 { - pins = "gpio40"; - function = "led4"; - bias-pull-down; - }; - }; - }; - - blsp_dma: dma@7884000 { - status = "okay"; - }; - - spi_0: spi@78b5000 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 41 GPIO_ACTIVE_HIGH>; - num-cs = <2>; - - flash0@0 { - reg = <0>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <24000000>; - broken-flash-reset; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x000000 0x040000>; - read-only; - }; - - partition@40000 { - label = "0:MIBIB"; - reg = <0x040000 0x020000>; - read-only; - }; - - partition@60000 { - label = "0:QSEE"; - reg = <0x060000 0x060000>; - read-only; - }; - - partition@c0000 { - label = "0:CDT"; - reg = <0x0c0000 0x010000>; - read-only; - }; - - partition@d0000 { - label = "0:DDRPARAMS"; - reg = <0x0d0000 0x010000>; - read-only; - }; - - partition@e0000 { - label = "u-boot-env"; - reg = <0x0e0000 0x010000>; - }; - - partition@f0000 { - label = "u-boot"; - reg = <0x0f0000 0x080000>; - read-only; - }; - - partition@170000 { - label = "0:ART"; - reg = <0x170000 0x010000>; - read-only; - }; - }; - }; - - nand@1 { - reg = <1>; - status = "okay"; - compatible = "spi-nand"; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - /* The device has 128MB, but we can only address - * 64MB because of the bootloader's default settings. - * This is due to the old mt29f driver, - * which detected the deivce with only 64MB - */ - partition@0 { - label = "ubi"; - reg = <0x0000000 0x4000000>; - }; - }; - }; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; - reset-delay-us = <5000>; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - i2c_0: i2c@78b7000 { - pinctrl-0 = <&i2c_0_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - serial@78af000 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - serial@78b0000 { - pinctrl-0 = <&serial_1_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - usb3_ss_phy: ssphy@9a000 { - status = "okay"; - }; - - usb3_hs_phy: hsphy@a6000 { - status = "okay"; - }; - - usb3: usb3@8af8800 { - status = "okay"; - }; - - usb2_hs_phy: hsphy@a8000 { - status = "okay"; - }; - - usb2: usb2@60f8800 { - status = "okay"; - }; - - cryptobam: dma@8e04000 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - switch_lan_bmp = <0x1e>; - switch_wan_bmp = <0x20>; - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - - qpic_bam: dma@7984000 { - status = "okay"; - }; - - pcie0: pci@40000000 { - status = "okay"; - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - }; - - nand: qpic-nand@79b0000 { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - }; -}; - -&gmac0 { - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <2 0x20>; -}; - -&gmac1 { - qcom,phy_mdio_addr = <3>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <1 0x10>; -}; - -&wifi0 { - status = "okay"; -}; - -&wifi1 { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts deleted file mode 100644 index 1bcf5e80bf..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts +++ /dev/null @@ -1,288 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * Copyright (c) 2017, Christian Mehlis - * Copyright (c) 2017-2018, Sven Eckelmann - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "Compex WPJ428"; - compatible = "compex,wpj428"; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; - reset-delay-us = <2000>; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2: usb2@60f8800 { - status = "okay"; - }; - - usb3: usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - switch_lan_bmp = <0x10>; - switch_wan_bmp = <0x20>; - - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - aliases { - led-boot = &status; - led-failsafe = &status; - led-upgrade = &status; - }; - - leds { - compatible = "gpio-leds"; - - status: rss4 { - label = "wpj428:green:rss4"; - gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; - }; - - rss3 { - label = "wpj428:green:rss3"; - gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; - }; - }; - - beeper: beeper { - compatible = "gpio-beeper"; - gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; - }; -}; - -&tlmm { - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio53"; - function = "mdio"; - bias-pull-up; - }; - - mux_2 { - pins = "gpio52"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "0:SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition1@40000 { - label = "0:MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition2@60000 { - label = "0:QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition3@c0000 { - label = "0:CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition4@d0000 { - label = "0:DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition5@e0000 { - label = "0:APPSBLENV"; /* uboot env*/ - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition5@f0000 { - label = "0:APPSBL"; /* uboot */ - reg = <0x000f0000 0x00080000>; - read-only; - }; - partition5@170000 { - label = "0:ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - partition6@180000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x00180000 0x01e80000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac0 { - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <2 0x20>; -}; - -&gmac1 { - qcom,phy_mdio_addr = <3>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <1 0x10>; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; -}; - -&wifi1 { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts deleted file mode 100644 index 126d944ebb..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts +++ /dev/null @@ -1,180 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 OR MIT - -#include "qcom-ipq4029-aruba-glenmorangie.dtsi" -#include - -/ { - model = "Aruba AP-303"; - compatible = "aruba,ap-303"; - - aliases { - led-boot = &led_system_green; - led-failsafe = &led_system_red; - led-running = &led_system_green; - led-upgrade = &led_system_red; - }; - - leds { - compatible = "gpio-leds"; - - wifi_green { - label = "ap-303:green:wifi"; - gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tpt"; - }; - - wifi_amber { - label = "ap-303:amber:wifi"; - gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy1tpt"; - }; - - led_system_red: system_red { - label = "ap-303:red:system"; - gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; - }; - - led_system_green: system_green { - label = "ap-303:green:system"; - gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&tlmm { - /* - * In addition to the Pins listed below, - * the following GPIOs have "features": - * 54 - out - active low to force HW reset - * 41 - out - active low to reset TPM - * 43 - out - active low to reset BLE radio - * 19 - in - active high when DC powered - */ - - phy-reset { - line-name = "PHY-reset"; - gpios = <42 GPIO_ACTIVE_HIGH>; - gpio-hog; - output-high; - }; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - /* - * There is no partition map for the NOR flash - * in the stock firmware. - * - * All partitions here are based on offsets - * found in the U-Boot GPL code and information - * from smem. - */ - - partition@0 { - label = "sbl1"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "mibib"; - reg = <0x40000 0x20000>; - read-only; - }; - - partition@60000 { - label = "qsee"; - reg = <0x60000 0x60000>; - read-only; - }; - - partition@c0000 { - label = "cdt"; - reg = <0xc0000 0x10000>; - read-only; - }; - - partition@d0000 { - label = "ddrparams"; - reg = <0xd0000 0x10000>; - read-only; - }; - - partition@e0000 { - label = "ART"; - reg = <0xe0000 0x10000>; - read-only; - }; - - partition@f0000 { - label = "appsbl"; - reg = <0xf0000 0xf0000>; - read-only; - }; - - partition@1e0000 { - label = "mfginfo"; - reg = <0x1e0000 0x10000>; - read-only; - }; - - partition@1f0000 { - label = "apcd"; - reg = <0x1f0000 0x10000>; - read-only; - }; - - partition@200000 { - label = "osss"; - reg = <0x200000 0x180000>; - read-only; - }; - - partition@380000 { - /* This is empty */ - label = "appsblenv"; - reg = <0x380000 0x10000>; - read-only; - }; - - partition@390000 { - label = "pds"; - reg = <0x390000 0x10000>; - read-only; - }; - - partition@3a0000 { - label = "fcache"; - reg = <0x3a0000 0x10000>; - read-only; - }; - - partition@3b0000 { - /* Called osss1 in smem */ - label = "u-boot-env-bak"; - reg = <0x3b0000 0x10000>; - read-only; - }; - - partition@3f0000 { - label = "u-boot-env"; - reg = <0x3f0000 0x10000>; - read-only; - }; - }; - }; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts deleted file mode 100644 index 1f7a728492..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts +++ /dev/null @@ -1,421 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "Aruba AP-303H"; - compatible = "aruba,ap-303h"; - - aliases { - led-boot = &led_system_green; - led-failsafe = &led_system_red; - led-running = &led_system_green; - led-upgrade = &led_system_amber; - }; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - - reset-gpios = <&tlmm 19 GPIO_ACTIVE_LOW>; - reset-delay-us = <2000>; - }; - - counter@4a1000 { - compatible = "qcom,qca-gcnt"; - reg = <0x4a1000 0x4>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2@60f8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - - i2c_0: i2c@78b7000 { - pinctrl-0 = <&i2c_0_pins>; - pinctrl-names = "default"; - status = "okay"; - - tpm@29 { - /* No Driver */ - compatible = "atmel,at97sc3203"; - reg = <0x29>; - read-only; - }; - - power-monitor@40 { - /* No driver */ - compatible = "isl,isl28022"; - reg = <0x40>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - wifi_green { - label = "ap-303h:green:wifi"; - gpios = <&tlmm 27 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tpt"; - }; - - wifi_amber { - label = "ap-303h:amber:wifi"; - gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy1tpt"; - }; - - pse { - label = "ap-303h:green:pse"; - gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; - }; - - led_system_red: system_red { - label = "ap-303h:red:system"; - gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>; - }; - - led_system_green: system_green { - label = "ap-303h:green:system"; - gpios = <&tlmm 24 GPIO_ACTIVE_HIGH>; - }; - - led_system_amber: system_amber { - label = "ap-303h:amber:system"; - gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "Reset button"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&blsp1_uart2 { - /* Texas Instruments CC2540T BLE radio */ - pinctrl-0 = <&serial_1_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - /* - * In addition to the Pins listed below, - * the following GPIOs have "features": - * 39 - out - active low to force HW reset - * 32 - out - active low to reset TPM - * 43 - out - active low to reset BLE radio - * 41 - out - pulse to set warm reset status - * 34 - out - active low to enable PSE port - * 22 - in - active low when 802.3at powered - * 29 - in - active high when DC powered - * 40 - in - active low when reset due to cold HW reset - * 30 - in - active low when USB overcurrent detected - * 35 - in - interrupt line for power monitor chip - * 31 - in - active low when PSE port active - */ - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio12", "gpio59"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - i2c_0_pins: i2c_0_pinmux { - mux { - pins = "gpio20", "gpio21"; - function = "blsp_i2c0"; - drive-strength = <4>; - bias-disable; - }; - }; - - serial_0_pins: serial_0_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - serial_1_pins: serial_1_pinmux { - mux { - pins = "gpio8", "gpio9"; - function = "blsp_uart1"; - bias-disable; - }; - }; - - usb-power { - line-name = "USB-power"; - gpios = <23 GPIO_ACTIVE_HIGH>; - gpio-hog; - output-high; - }; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - /* - * There is no partition map for the NOR flash - * in the stock firmware. - * - * All partitions here are based on offsets - * found in the U-Boot GPL code and information - * from smem. - */ - - partition@0 { - label = "sbl1"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "mibib"; - reg = <0x40000 0x20000>; - read-only; - }; - - partition@60000 { - label = "qsee"; - reg = <0x60000 0x60000>; - read-only; - }; - - partition@c0000 { - label = "cdt"; - reg = <0xc0000 0x10000>; - read-only; - }; - - partition@d0000 { - label = "ddrparams"; - reg = <0xd0000 0x10000>; - read-only; - }; - - partition@e0000 { - label = "appsblenv"; - reg = <0xe0000 0x10000>; - read-only; - }; - - partition@f0000 { - label = "appsbl"; - reg = <0xf0000 0x100000>; - read-only; - }; - - partition@1e0000 { - label = "ART"; - reg = <0x1f0000 0x10000>; - read-only; - }; - - partition@1f0000 { - label = "osss"; - reg = <0x200000 0x170000>; - read-only; - }; - - partition@200000 { - label = "pds"; - reg = <0x370000 0x10000>; - read-only; - }; - - partition@380000 { - label = "apcd"; - reg = <0x380000 0x10000>; - read-only; - }; - - partition@390000 { - label = "mfginfo"; - reg = <0x390000 0x10000>; - read-only; - }; - - partition@3a0000 { - label = "fcache"; - reg = <0x3a0000 0x10000>; - read-only; - }; - - partition@3b0000 { - /* Called osss1 in smem */ - label = "u-boot-env-bak"; - reg = <0x3b0000 0x10000>; - read-only; - }; - - partition@3f0000 { - label = "u-boot-env"; - reg = <0x3c0000 0x40000>; - read-only; - }; - }; - }; - - flash@1 { - status = "okay"; - - compatible = "spi-nand"; - reg = <1>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - /* 'aos0' in Aruba firmware */ - label = "aos0"; - reg = <0x0 0x2000000>; - read-only; - }; - - partition@2000000 { - /* 'aos1' in Aruba firmware */ - label = "ubi"; - reg = <0x2000000 0x2000000>; - }; - - partition@4000000 { - label = "aruba-ubifs"; - reg = <0x4000000 0x4000000>; - read-only; - }; - }; - }; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "Aruba-AP-303"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "Aruba-AP-303"; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts deleted file mode 100644 index 07bb674520..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts +++ /dev/null @@ -1,193 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 OR MIT - -#include "qcom-ipq4029-aruba-glenmorangie.dtsi" -#include - -/ { - model = "Aruba AP-365"; - compatible = "aruba,ap-365"; - - aliases { - led-boot = &led_system_green; - led-failsafe = &led_system_red; - led-running = &led_system_green; - led-upgrade = &led_system_red; - }; - - leds { - compatible = "gpio-leds"; - - led_system_red: system_red { - label = "ap-365:red:system"; - gpios = <&tlmm 46 GPIO_ACTIVE_LOW>; - }; - - led_system_green: system_green { - label = "ap-365:green:system"; - gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; - }; - - system_amber { - label = "ap-365:amber:system"; - gpios = <&tlmm 49 GPIO_ACTIVE_LOW>; - }; - }; - - watchdog { - compatible = "linux,wdt-gpio"; - gpios = <&tlmm 41 GPIO_ACTIVE_LOW>; - hw_algo = "toggle"; - hw_margin_ms = <1000>; - always-running; - }; -}; - -&tlmm { - /* - * In addition to the Pins listed below, - * the following GPIOs have "features": - * 39 - out - pulse low to reset watchdog status flipflop - * 40 - out - active high to enable watchdog - * 41 - out - watchdog poke - * 42 - out - active low to reset BLE radio - * 43 - out - active low to reset TPM - * 47 - out - pulse low to reset warm reset status - * 54 - out - active low to force HW reset - * 18 - in - PHY interrupt line - * 45 - in - power monitor interrupt - * 48 - in - active low when cold reset - * 52 - in - active high when watchdog reset - */ - - phy-reset { - line-name = "PHY-reset"; - gpios = <42 GPIO_ACTIVE_HIGH>; - gpio-hog; - output-high; - }; -}; - -&i2c_0 { - power-monitor@40 { - /* No driver */ - compatible = "isl,isl28022"; - reg = <0x40>; - }; - - temperature-sensor@48 { - compatible = "adi,ad7416"; - reg = <0x48>; - }; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - /* - * There is no partition map for the NOR flash - * in the stock firmware. - * - * All partitions here are based on offsets - * found in the U-Boot GPL code and information - * from smem. - */ - - partition@0 { - label = "sbl1"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "mibib"; - reg = <0x40000 0x20000>; - read-only; - }; - - partition@60000 { - label = "qsee"; - reg = <0x60000 0x60000>; - read-only; - }; - - partition@c0000 { - label = "cdt"; - reg = <0xc0000 0x10000>; - read-only; - }; - - partition@d0000 { - label = "ddrparams"; - reg = <0xd0000 0x10000>; - read-only; - }; - - partition@e0000 { - label = "u-boot-env"; - reg = <0xe0000 0x10000>; - read-only; - }; - - partition@f0000 { - label = "appsbl"; - reg = <0xf0000 0x100000>; - read-only; - }; - - partition@1f0000 { - label = "ART"; - reg = <0x1f0000 0x10000>; - read-only; - }; - - partition@200000 { - label = "osss"; - reg = <0x200000 0x170000>; - read-only; - }; - - partition@370000 { - label = "pds"; - reg = <0x370000 0x10000>; - read-only; - }; - - partition@380000 { - label = "apcd"; - reg = <0x380000 0x10000>; - read-only; - }; - - partition@390000 { - label = "mfginfo"; - reg = <0x390000 0x10000>; - read-only; - }; - - partition@3a0000 { - label = "fcache"; - reg = <0x3a0000 0x10000>; - read-only; - }; - - partition@3b0000 { - label = "osss1"; - reg = <0x3b0000 0x50000>; - read-only; - }; - }; - }; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi deleted file mode 100644 index 4d1d82a272..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi +++ /dev/null @@ -1,249 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - - /delete-node/ ethernet-phy@0; - /delete-node/ ethernet-phy@2; - /delete-node/ ethernet-phy@3; - /delete-node/ ethernet-phy@4; - - ethernet-phy@5 { - reg = <0x5>; - }; - }; - - counter@4a1000 { - compatible = "qcom,qca-gcnt"; - reg = <0x4a1000 0x4>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */ - switch_lan_bmp = <0x0>; /* lan port bitmap */ - switch_wan_bmp = <0x10>; /* wan port bitmap */ - }; - - edma@c080000 { - qcom,single-phy; - qcom,num_gmac = <1>; - phy-mode = "rgmii-id"; - status = "okay"; - }; - - i2c_0: i2c@78b7000 { - pinctrl-0 = <&i2c_0_pins>; - pinctrl-names = "default"; - status = "okay"; - - tpm@29 { - /* No Driver */ - compatible = "atmel,at97sc3203"; - reg = <0x29>; - read-only; - }; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "Reset button"; - gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - /* Texas Instruments CC2540T BLE radio */ - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&blsp1_uart2 { - pinctrl-0 = <&serial_1_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac0 { - qcom,phy_mdio_addr = <5>; - qcom,poll_required = <1>; - vlan_tag = <0 0x20>; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - i2c_0_pins: i2c_0_pinmux { - mux { - pins = "gpio10", "gpio11"; - function = "blsp_i2c0"; - drive-strength = <4>; - bias-disable; - }; - }; - - serial_0_pins: serial_0_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - serial_1_pins: serial_1_pinmux { - mux { - pins = "gpio8", "gpio9"; - function = "blsp_uart1"; - bias-disable; - }; - }; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - /* 'aos0' in Aruba firmware */ - label = "aos0"; - reg = <0x0 0x2000000>; - read-only; - }; - - partition@2000000 { - /* 'aos1' in Aruba firmware */ - label = "ubi"; - reg = <0x2000000 0x2000000>; - }; - - partition@4000000 { - label = "aruba-ubifs"; - reg = <0x4000000 0x4000000>; - read-only; - }; - }; - }; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "Aruba-AP-303"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "Aruba-AP-303"; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts deleted file mode 100644 index b32eb29f8c..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts +++ /dev/null @@ -1,280 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "GL.iNet GL-B1300"; - compatible = "glinet,gl-b1300"; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - status = "okay"; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2@60f8800 { - status = "okay"; - }; - - usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - switch_lan_bmp = <0x18>; - switch_wan_bmp = <0x20>; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - wps { - label = "wps"; - gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - power: power { - label = "gl-b1300:green:power"; - gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - mesh { - label = "gl-b1300:green:mesh"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - }; - - wlan { - label = "gl-b1300:green:wlan"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - mx25l25635f@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - SBL1@0 { - label = "SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - - MIBIB@40000 { - label = "MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - - QSEE@60000 { - label = "QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - - CDT@c0000 { - label = "CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - - DDRPARAMS@d0000 { - label = "DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - - APPSBLENV@e0000 { - label = "APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - - APPSBL@f0000 { - label = "APPSBL"; - reg = <0xf0000 0x80000>; - read-only; - }; - - ART@170000 { - label = "ART"; - reg = <0x170000 0x10000>; - read-only; - }; - - firmware@180000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x180000 0x1e80000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - }; - pinmux_cs { - function = "gpio"; - pins = "gpio54"; - }; - pinconf { - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pinconf_cs { - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "GL-B1300"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "GL-B1300"; -}; diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-mr33.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-mr33.dts deleted file mode 100644 index 5003572420..0000000000 --- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4029-mr33.dts +++ /dev/null @@ -1,400 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source for Meraki MR33 (Stinkbug) - * - * Copyright (C) 2017 Chris Blake - * Copyright (C) 2017 Christian Lamparter - * - * Based on Cisco Meraki DTS from GPL release r25-linux-3.14-20170427 - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - */ - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "Meraki MR33 Access Point"; - compatible = "meraki,mr33"; - - aliases { - led-boot = &status_green; - led-failsafe = &status_red; - led-running = &status_green; - led-upgrade = &power_orange; - }; - - /* Do we really need this defined? */ - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - - /* It is a 56-bit counter that supplies the count to the ARM arch - timers and without upstream driver */ - counter@4a1000 { - compatible = "qcom,qca-gcnt"; - reg = <0x4a1000 0x4>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - serial@78b0000 { - pinctrl-0 = <&serial_1_pins>; - pinctrl-names = "default"; - status = "okay"; - - bluetooth { - compatible = "ti,cc2650"; - enable-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; - }; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */ - switch_lan_bmp = <0x0>; /* lan port bitmap */ - switch_wan_bmp = <0x10>; /* wan port bitmap */ - }; - - edma@c080000 { - qcom,single-phy; - qcom,num_gmac = <1>; - phy-mode = "rgmii-rxid"; - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - power_orange: power { - label = "mr33:orange:power"; - gpios = <&tlmm 49 GPIO_ACTIVE_LOW>; - panic-indicator; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac0 { - qcom,phy_mdio_addr = <1>; - qcom,poll_required = <1>; - vlan_tag = <0 0x20>; -}; - -&blsp1_i2c3 { - pinctrl-0 = <&i2c_0_pins>; - pinctrl-names = "default"; - status = "okay"; - at24@50 { - compatible = "atmel,24c64"; - pagesize = <32>; - reg = <0x50>; - read-only; /* This holds our MAC & Meraki board-data */ - }; -}; - -&blsp1_i2c4 { - pinctrl-0 = <&i2c_1_pins>; - pinctrl-names = "default"; - status = "okay"; - - led-controller@30 { - compatible = "ti,lp5562"; - reg = <0x30>; - clock-mode = /bits/8 <2>; - enable-gpio = <&tlmm 48 GPIO_ACTIVE_HIGH>; - - /* RGB led */ - status_red: chan0 { - chan-name = "mr33:red:status"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - }; - - status_green: chan1 { - chan-name = "mr33:green:status"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - }; - - chan2 { - chan-name = "mr33:blue:status"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - }; - - chan3 { - chan-name = "mr33:white:status"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - }; - }; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "sbl1"; - reg = <0x00000000 0x00100000>; - read-only; - }; - partition@100000 { - label = "mibib"; - reg = <0x00100000 0x00100000>; - read-only; - }; - partition@200000 { - label = "bootconfig"; - reg = <0x00200000 0x00100000>; - read-only; - }; - partition@300000 { - label = "qsee"; - reg = <0x00300000 0x00100000>; - read-only; - }; - partition@400000 { - label = "qsee_alt"; - reg = <0x00400000 0x00100000>; - read-only; - }; - partition@500000 { - label = "cdt"; - reg = <0x00500000 0x00080000>; - read-only; - }; - partition@580000 { - label = "cdt_alt"; - reg = <0x00580000 0x00080000>; - read-only; - }; - partition@600000 { - label = "ddrparams"; - reg = <0x00600000 0x00080000>; - read-only; - }; - partition@700000 { - label = "u-boot"; - reg = <0x00700000 0x00200000>; - read-only; - }; - partition@900000 { - label = "u-boot-backup"; - reg = <0x00900000 0x00200000>; - read-only; - }; - partition@b00000 { - label = "ART"; - reg = <0x00b00000 0x00080000>; - read-only; - }; - partition@c00000 { - label = "ubi"; - reg = <0x00c00000 0x07000000>; - /* - * Do not try to allocate the remaining - * 4 MiB to this ubi partition. It will - * confuse the u-boot and it might not - * find the kernel partition anymore. - */ - }; - }; - }; -}; - -&pcie0 { - status = "okay"; - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi2: wifi@1,0 { - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - }; - }; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - /* - * GPIO43 should be 0/1 whenever the unit is - * powered through PoE or AC-Adapter. - * That said, playing with this seems to - * reset the AP. - */ - - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial_0_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - serial_1_pins: serial1_pinmux { - mux { - /* We use the i2c-0 pins for serial_1 */ - pins = "gpio8", "gpio9"; - function = "blsp_uart1"; - bias-disable; - }; - }; - - i2c_0_pins: i2c_0_pinmux { - pinmux { - function = "blsp_i2c0"; - pins = "gpio20", "gpio21"; - }; - pinconf { - pins = "gpio20", "gpio21"; - drive-strength = <16>; - bias-disable; - }; - }; - - i2c_1_pins: i2c_1_pinmux { - pinmux { - function = "blsp_i2c1"; - pins = "gpio34", "gpio35"; - }; - pinconf { - pins = "gpio34", "gpio35"; - drive-strength = <16>; - bias-disable; - }; - }; - - nand_pins: nand_pins { - /* - * There are 18 pins. 15 pins are common between LCD and NAND. - * The QPIC controller arbitrates between LCD and NAND. Of the - * remaining 4, 2 are for NAND and 2 are for LCD exclusively. - * - * The meraki source hints that the bluetooth module claims - * pin 52 as well. But sadly, there's no data whenever this - * is a NAND or LCD exclusive pin or not. - */ - - pullups { - pins = "gpio52", "gpio53", "gpio58", - "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "Meraki-MR33"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "Meraki-MR33"; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-a42.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-a42.dts deleted file mode 100644 index 33c44a8097..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-a42.dts +++ /dev/null @@ -1,219 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * Copyright (c) 2017, Sven Eckelmann - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "OpenMesh A42"; - compatible = "openmesh,a42"; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2: usb2@60f8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - leds { - compatible = "gpio-leds"; - - red { - label = "a42:red:status"; - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; - }; - - power: green { - label = "a42:green:status"; - gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; - }; - - blue { - label = "a42:blue:status"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; - }; - }; - - watchdog { - compatible = "linux,wdt-gpio"; - gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; - hw_algo = "toggle"; - /* hw_margin_ms is actually 300s but driver limits it to 60s */ - hw_margin_ms = <60000>; - always-running; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - /* partitions are passed via bootloader */ - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac0 { - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <2 0x20>; -}; - -&gmac1 { - qcom,phy_mdio_addr = <3>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <1 0x10>; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "OM-A42"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "OM-A42"; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts deleted file mode 100644 index e21c40cae0..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts +++ /dev/null @@ -1,348 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "ALFA Network AP120C-AC"; - compatible = "alfa-network,ap120c-ac"; - - aliases { - led-boot = &status; - led-failsafe = &status; - led-running = &status; - led-upgrade = &status; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - status: status { - label = "ap120c-ac:blue:status"; - gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - - wan { - label = "ap120c-ac:amber:wan"; - gpios = <&qca8075 19 GPIO_ACTIVE_HIGH>; - }; - - wlan2g { - label = "ap120c-ac:green:wlan2g"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tpt"; - }; - - wlan5g { - label = "ap120c-ac:red:wlan5g"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy1tpt"; - }; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - counter@4a1000 { - compatible = "qcom,qca-gcnt"; - reg = <0x4a1000 0x4>; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2@60f8800 { - status = "okay"; - }; - - usb3@8af8800 { - status = "okay"; - - dwc3@8a00000 { - phys = <&usb3_hs_phy>; - phy-names = "usb2-phy"; - }; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - qca8075: ess-switch@c000000 { - status = "okay"; - - switch_lan_bmp = <0x10>; - switch_wan_bmp = <0x20>; - - #gpio-cells = <2>; - gpio-controller; - }; - - edma@c080000 { - status = "okay"; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_i2c3 { - status = "okay"; - - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - - tpm@29 { - compatible = "atmel,at97sc3204t"; - reg = <0x29>; - }; -}; - -&blsp1_spi1 { - status = "okay"; - - pinctrl-0 = <&spi0_pins>; - pinctrl-names = "default"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, - <&tlmm 4 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - - partition@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - - partition@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - - partition@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - - partition@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - - partition@e0000 { - label = "APPSBLENV"; - reg = <0x000e0000 0x00010000>; - }; - - partition@f0000 { - label = "APPSBL"; - reg = <0x000f0000 0x00080000>; - read-only; - }; - - partition@170000 { - label = "ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - - partition@180000 { - label = "priv_data1"; - reg = <0x00180000 0x00010000>; - read-only; - }; - - partition@190000 { - label = "priv_data2"; - reg = <0x00190000 0x00010000>; - read-only; - }; - }; - }; - - nand@1 { - compatible = "spi-nand"; - reg = <1>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "rootfs1"; - reg = <0x00000000 0x04000000>; - }; - - partition@4000000 { - label = "rootfs2"; - reg = <0x04000000 0x04000000>; - }; - }; - }; -}; - -&blsp1_uart1 { - status = "okay"; - - pinctrl-0 = <&serial0_pins>; - pinctrl-names = "default"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac0 { - qcom,forced_duplex = <1>; - qcom,forced_speed = <1000>; - qcom,phy_mdio_addr = <3>; - qcom,poll_required = <1>; - vlan_tag = <1 0x10>; -}; - -&gmac1 { - qcom,forced_duplex = <1>; - qcom,forced_speed = <1000>; - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - vlan_tag = <2 0x20>; -}; - -&tlmm { - i2c0_pins: i2c0_pinmux { - mux_i2c { - function = "blsp_i2c0"; - pins = "gpio58", "gpio59"; - drive-strength = <16>; - bias-disable; - }; - }; - - mdio_pins: mdio_pinmux { - mux_mdio { - pins = "gpio53"; - function = "mdio"; - bias-pull-up; - }; - - mux_mdc { - pins = "gpio52"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial0_pins: serial0_pinmux { - mux_uart { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi0_pins: spi0_pinmux { - mux_spi { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - mux_cs { - function = "gpio"; - pins = "gpio54", "gpio4"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC"; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts deleted file mode 100644 index d8b9e7ef13..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts +++ /dev/null @@ -1,242 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "EZVIZ CS-W3-WD1200G EUP"; - compatible = "ezviz,cs-w3-wd1200g-eup"; - - aliases { - led-boot = &led_status_green; - led-failsafe = &led_status_red; - led-running = &led_status_blue; - led-upgrade = &led_status_green; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; - reset-delay-us = <5000>; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_status_red: status_red { - label = "cs-w3-wd1200g-eup:red:status"; - gpios = <&tlmm 0 GPIO_ACTIVE_LOW>; - }; - - led_status_green: status_green { - label = "cs-w3-wd1200g-eup:green:status"; - gpios = <&tlmm 3 GPIO_ACTIVE_LOW>; - }; - - led_status_blue: status_blue { - label = "cs-w3-wd1200g-eup:blue:status"; - gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio53"; - function = "mdio"; - bias-pull-up; - }; - - mux_2 { - pins = "gpio52"; - function = "mdc"; - bias-pull-up; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - - partition1@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - - partition2@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - - partition3@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - - partition4@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - - partition5@E0000 { - label = "APPSBLENV"; - reg = <0x000e0000 0x00010000>; - read-only; - }; - - partition6@F0000 { - label = "APPSBL"; - reg = <0x000f0000 0x00080000>; - read-only; - }; - - partition7@170000 { - label = "ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - - partition9@580000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x00180000 0x00e80000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "ezviz-cs-w3-wd1200g-eup"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "ezviz-cs-w3-wd1200g-eup"; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts deleted file mode 100644 index 17d9215544..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts +++ /dev/null @@ -1,241 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "D-Link DAP 2610"; - compatible = "dlink,dap-2610"; - - aliases { - led-boot = &led_red; - led-failsafe = &led_red; - led-running = &led_green; - led-upgrade = &led_red; - }; - - soc { - edma@c080000 { - qcom,num_gmac = <1>; - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - rng@22000 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - switch_lan_bmp = <0x20>; - switch_wan_bmp = <0x00>; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_red: red { - label = "dap-2610:red:power"; - gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; - }; - - led_green: green { - label = "dap-2610:green:power"; - gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fixed-partitions"; - - partition@0 { - label = "SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - partition@40000 { - label = "MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - partition@60000 { - label = "QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - partition@c0000 { - label = "CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - partition@d0000 { - label = "DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - partition@e0000 { - label = "APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - partition@f0000 { - label = "APPSBL"; - reg = <0xf0000 0x80000>; - read-only; - }; - partition@170000 { - label = "ART"; - reg = <0x170000 0x10000>; - read-only; - }; - partition@180000 { - compatible = "wrg"; - label = "firmware"; - reg = <0x180000 0xdc0000>; - }; - partition@fb0000 { - label = "rgbd"; - reg = <0xfb0000 0x10000>; - read-only; - }; - partition@fc0000 { - label = "bdcfg"; - reg = <0xfc0000 0x10000>; - read-only; - }; - partition@fd0000 { - label = "langpack"; - reg = <0xfd0000 0x20000>; - read-only; - }; - partition@ff0000 { - label = "certificate"; - reg = <0xff0000 0x10000>; - read-only; - }; - partition@f40000 { - label = "captival"; - reg = <0xf40000 0x70000>; - read-only; - }; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac0 { - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <1 0x20>; -}; - -&mdio { - status = "okay"; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - mux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - mux_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "dlink,dap-2610"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "dlink,dap-2610"; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts deleted file mode 100644 index 2f9a890485..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts +++ /dev/null @@ -1,277 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "Linksys EA6350v3"; - compatible = "linksys,ea6350v3"; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2@60f8800 { - status = "okay"; - }; - - usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&tlmm 0 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - power: status { - label = "EA6350v3:green:status"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "linksys-ea6350v3"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "linksys-ea6350v3"; -}; - - -&blsp_dma { - status = "okay"; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - mux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - mux_cs { - function = "gpio"; - pins = "gpio54", "gpio59"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp1_spi1 { /* BLSP1 QUP1 */ - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, - <&tlmm 59 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - SBL1@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - MBIB@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - QSEE@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - CDT@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - APPSBLENV@d0000 { - label = "APPSBLENV"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - APPSBL@e0000 { - label = "APPSBL"; /* uboot */ - reg = <0x000e0000 0x00080000>; - read-only; - }; - ART@160000 { - label = "ART"; - reg = <0x00160000 0x00010000>; - read-only; - }; - u_env@170000 { - label = "u_env"; - reg = <0x00170000 0x00020000>; - }; - s_env@190000 { - label = "s_env"; - reg = <0x00190000 0x00020000>; - }; - devinfo@1b0000 { - label = "devinfo"; - reg = <0x001b0000 0x00010000>; - }; - /* 0x001c0000 - 0x00200000 unused */ - }; - }; - - flash@1 { - status = "okay"; - compatible = "spi-nand"; - reg = <1>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - kernel@0 { - label = "kernel"; - reg = <0x00000000 0x02800000>; - }; - rootfs@300000 { - label = "rootfs"; - reg = <0x00300000 0x02500000>; - }; - alt_kernel@2800000 { - label = "alt_kernel"; - reg = <0x02800000 0x02800000>; - }; - alt_rootfs@2b00000 { - label = "alt_rootfs"; - reg = <0x02b00000 0x02500000>; - }; - sysdiag@5000000 { - label = "sysdiag"; - reg = <0x05000000 0x00100000>; - }; - syscfg@5100000 { - label = "syscfg"; - reg = <0x05100000 0x02F00000>; - }; - /* 0x00000000 - 0x08000000: 128 MiB */ - }; - }; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts deleted file mode 100644 index 32fded4c0e..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts +++ /dev/null @@ -1,235 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "EnGenius EAP1300"; - compatible = "engenius,eap1300"; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>; - linux,code = ; - }; - }; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - leds { - compatible = "gpio-leds"; - - power: orange { - label = "eap1300:orange:power"; - gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; - }; - - lan { - label = "eap1300:blue:lan"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - }; - - mesh { - label = "eap1300:blue:mesh"; - gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; - }; - - wlan2g { - label = "eap1300:blue:wlan2g"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - }; - - wlan5g { - label = "eap1300:yellow:wlan5g"; - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio54", "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition1@40000 { - label = "0:MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition2@60000 { - label = "0:QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition3@c0000 { - label = "0:CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition4@d0000 { - label = "0:DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition5@e0000 { - label = "0:APPSBLENV"; - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition6@f0000 { - label = "0:APPSBL"; - reg = <0x000f0000 0x00090000>; - read-only; - }; - partition7@180000 { - label = "0:ART"; - reg = <0x00180000 0x00010000>; - read-only; - }; - partition8@190000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x190000 0x1dc0000>; - }; - partition9@1f50000 { - label = "u-boot-env"; - reg = <0x01f50000 0x00010000>; - }; - partition10@1f60000 { - label = "userconfig"; - reg = <0x01f60000 0x000a0000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac0 { - vlan_tag = <2 0x20>; -}; - -&gmac1 { - vlan_tag = <1 0x10>; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "EnGenius-EAP1300"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "EnGenius-EAP1300"; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-emd1.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-emd1.dts deleted file mode 100644 index cf4f793f21..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-emd1.dts +++ /dev/null @@ -1,233 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "EnGenius EMD1"; - compatible = "engenius,emd1"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - switch_lan_bmp = <0x20>; - switch_wan_bmp = <0x00>; - }; - - edma@c080000 { - status = "okay"; - qcom,num_gmac = <1>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_power: power { - label = "emd1:white:power"; - gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; - }; - - wlan2g { - label = "emd1:red:wlan2g"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tpt"; - }; - - wlan5g { - label = "emd1:blue:wlan5g"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy1tpt"; - }; - - mesh { - label = "emd1:orange:mesh"; - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio54", "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - pin_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "0:SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition1@40000 { - label = "0:MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition2@60000 { - label = "0:QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition3@c0000 { - label = "0:CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition4@d0000 { - label = "0:DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition5@e0000 { - label = "0:APPSBLENV"; - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition6@f0000 { - label = "0:APPSBL"; - reg = <0x000f0000 0x00080000>; - read-only; - }; - partition7@170000 { - label = "0:ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - partition8@180000 { - label = "userconfig"; - reg = <0x00180000 0x00080000>; - read-only; - }; - partition9@200000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x200000 0x01e00000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&gmac0 { - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <1 0x20>; -}; - -&cryptobam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "EnGenius-EMD1"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "EnGenius-EMD1"; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts deleted file mode 100644 index 50067aaa91..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts +++ /dev/null @@ -1,235 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "EnGenius EMR3500"; - compatible = "engenius,emr3500"; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2_hs_phy: hsphy@a8000 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - leds { - compatible = "gpio-leds"; - - power: white { - label = "emr3500:white:power"; - gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; - }; - - blue { - label = "emr3500:blue"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - }; - - red { - label = "emr3500:red"; - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - }; - - orange { - label = "emr3500:orange"; - gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio54", "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition@40000 { - label = "0:MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition@60000 { - label = "0:QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition@c0000 { - label = "0:CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition@d0000 { - label = "0:DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition@e0000 { - label = "0:APPSBLENV"; - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition@f0000 { - label = "0:APPSBL"; - reg = <0x000f0000 0x00080000>; - read-only; - }; - partition@170000 { - label = "0:ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - partition@180000 { - label = "userconfig"; - reg = <0x00180000 0x00080000>; - read-only; - }; - partition@200000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x200000 0x1e00000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac0 { - vlan_tag = <1 0x10>; -}; - -&gmac1 { - vlan_tag = <2 0x20>; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "EnGenius-EMR3500"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "EnGenius-EMR3500"; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts deleted file mode 100644 index 8636b18b2e..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts +++ /dev/null @@ -1,265 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "EnGenius ENS620EXT"; - compatible = "engenius,ens620ext"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - - /* - * Disable the broken restart as a workaround for the buggy - * 3.0.0/3.0.1 U-boots that ship with the device. - * Note: The watchdog is now used to restart this device. - */ - restart@4ab000 { - status = "disabled"; - }; - }; - - buttons { - compatible = "gpio-keys"; - - wps { - label = "wps"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - power: power { - label = "ens620ext:amber:power"; - gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; - }; - - lan1 { - label = "ens620ext:green:lan1"; - gpios = <&tlmm 1 GPIO_ACTIVE_LOW>; - }; - - lan2 { - label = "ens620ext:green:lan2"; - gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; - }; - - wlan2G { - label = "ens620ext:green:wlan2G"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - }; - - wlan5G { - label = "ens620ext:green:wlan5G"; - gpios = <&tlmm 0 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - mux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - mux_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp1_spi1 { /* BLSP1 QUP1 */ - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - flash@0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition@e0000 { - label = "APPSBLENV"; /* uboot env*/ - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition@f0000 { - label = "APPSBL"; /* uboot */ - reg = <0x000f0000 0x00090000>; - read-only; - }; - partition@180000 { - label = "ART"; - reg = <0x00180000 0x00010000>; - read-only; - }; - partition@190000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x00190000 0x14d0000>; - }; - partition@1660000 { - label = "failsafe"; - reg = <0x01660000 0x008F0000>; - read-only; - }; - partition@1f50000 { - label = "u-boot-env"; - reg = <0x01f50000 0x00010000>; - read-only; - }; - partition@1f60000 { - label = "userconfig"; - reg = <0x01f60000 0x000a0000>; - read-only; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "EnGenius-ENS620EXT"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "EnGenius-ENS620EXT"; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ex6100v2.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ex6100v2.dts deleted file mode 100644 index 2b93dcbb99..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ex6100v2.dts +++ /dev/null @@ -1,33 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * Copyright (c) 2018, David Bauer - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4018-ex61x0v2.dtsi" -#include -#include - -/ { - model = "Netgear EX6100v2"; - compatible = "netgear,ex6100v2"; -}; - -&wifi0 { - qcom,ath10k-calibration-variant = "Netgear-EX6100v2"; -}; - -&wifi1 { - qcom,ath10k-calibration-variant = "Netgear-EX6100v2"; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts deleted file mode 100644 index f1c44c1ae8..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts +++ /dev/null @@ -1,33 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * Copyright (c) 2018, David Bauer - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4018-ex61x0v2.dtsi" -#include -#include - -/ { - model = "Netgear EX6150v2"; - compatible = "netgear,ex6150v2"; -}; - -&wifi0 { - qcom,ath10k-calibration-variant = "Netgear-EX6150v2"; -}; - -&wifi1 { - qcom,ath10k-calibration-variant = "Netgear-EX6150v2"; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi deleted file mode 100644 index cc70080c92..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi +++ /dev/null @@ -1,312 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * Copyright (c) 2018, David Bauer - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "Netgear EX61X0v2"; - compatible = "netgear,ex61x0v2"; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - qcom,num_gmac = <1>; - }; - }; - - aliases { - led-boot = &power_amber; - led-failsafe = &power_amber; - led-running = &power_green; - led-upgrade = &power_amber; - label-mac-device = &gmac0; - }; - - keys { - compatible = "gpio-keys"; - - wps { - label = "wps"; - gpios = <&tlmm 0 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - led_spi { - compatible = "spi-gpio"; - #address-cells = <1>; - #size-cells = <0>; - - sck-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; - mosi-gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; - num-chipselects = <0>; - - led_gpio: led_gpio@0 { - compatible = "fairchild,74hc595"; - reg = <0>; - gpio-controller; - #gpio-cells = <2>; - registers-number = <1>; - spi-max-frequency = <1000000>; - }; - }; - - leds { - compatible = "gpio-leds"; - - power_amber: power_amber { - label = "ex61x0v2:amber:power"; - gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>; - }; - - power_green: power_green { - label = "ex61x0v2:green:power"; - gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>; - }; - - right { - label = "ex61x0v2:blue:right"; - gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>; - }; - - left { - label = "ex61x0v2:blue:left"; - gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>; - }; - - client_green { - label = "ex61x0v2:green:client"; - gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>; - }; - - client_red { - label = "ex61x0v2:red:client"; - gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>; - }; - - router_green { - label = "ex61x0v2:green:router"; - gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>; - }; - - router_red { - label = "ex61x0v2:red:router"; - gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>; - }; - - wps { - label = "ex61x0v2:green:wps"; - gpios = <&tlmm 1 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - mx25l12805d@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - - partition1@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - - partition2@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - - partition3@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - - partition4@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - - partition5@E0000 { - label = "APPSBLENV"; - reg = <0x000e0000 0x00010000>; - read-only; - }; - - partition6@F0000 { - label = "APPSBL"; - reg = <0x000f0000 0x00080000>; - read-only; - }; - - partition7@170000 { - label = "ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - - partition8@180000 { - label = "config"; - reg = <0x00180000 0x00010000>; - read-only; - }; - - partition9@190000 { - label = "pot"; - reg = <0x00190000 0x00010000>; - read-only; - }; - - partition10@1a0000 { - label = "dnidata"; - reg = <0x001a0000 0x00010000>; - read-only; - }; - - partition11@1b0000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x001b0000 0x00e10000>; - }; - - partition12@fc0000 { - label = "language"; - reg = <0x00fc0000 0x00040000>; - read-only; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; -}; - -&wifi1 { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts deleted file mode 100644 index b2a32946d9..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts +++ /dev/null @@ -1,292 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "AVM FRITZ!Box 4040"; - compatible = "avm,fritzbox-4040"; - - aliases { - led-boot = &power; - led-failsafe = &flash; - led-running = &power; - led-upgrade = &flash; - label-mac-device = &gmac0; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2@60f8800 { - status = "okay"; - }; - - usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - qca8075: ess-switch@c000000 { - status = "okay"; - - #gpio-cells = <2>; - gpio-controller; - - enable-usb-power { - gpio-hog; - line-name = "enable USB3 power"; - gpios = <7 GPIO_ACTIVE_HIGH>; - output-high; - }; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - wlan { - label = "wlan"; - gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - switch-leds { - compatible = "gpio-leds"; - - wlan { - label = "fritz4040:green:wlan"; - gpios = <&qca8075 1 GPIO_ACTIVE_HIGH>; - }; - - panic: info_red { - label = "fritz4040:red:info"; - gpios = <&qca8075 3 GPIO_ACTIVE_HIGH>; - panic-indicator; - }; - - wan { - label = "fritz4040:green:wan"; - gpios = <&qca8075 5 GPIO_ACTIVE_HIGH>; - }; - - power: power { - label = "fritz4040:green:power"; - gpios = <&qca8075 11 GPIO_ACTIVE_HIGH>; - }; - - lan { - label = "fritz4040:green:lan"; - gpios = <&qca8075 13 GPIO_ACTIVE_HIGH>; - }; - - flash: info_amber { - label = "fritz4040:amber:info"; - gpios = <&qca8075 15 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - mux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - mux_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { /* BLSP1 QUP1 */ - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - status = "okay"; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition1@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition2@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition3@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition4@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition5@e0000 { - label = "APPSBLENV"; /* uboot env - empty */ - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition6@f0000 { - label = "urlader"; /* APPSBL */ - reg = <0x000f0000 0x0002dc000>; - read-only; - }; - partition7@11dc00 { - /* make a backup of this partition! */ - label = "urlader_config"; - reg = <0x0011dc00 0x00002400>; - read-only; - }; - partition8@120000 { - label = "tffs1"; - reg = <0x00120000 0x00080000>; - read-only; - }; - partition9@1a0000 { - label = "tffs2"; - reg = <0x001a0000 0x00080000>; - read-only; - }; - partition10@220000 { - label = "uboot"; - reg = <0x00220000 0x00080000>; - read-only; - }; - partition11@2A0000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x002a0000 0x01c60000>; - }; - partition12@1f00000 { - label = "jffs2"; - reg = <0x01f00000 0x00100000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040"; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts deleted file mode 100644 index 988b86b68d..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts +++ /dev/null @@ -1,9 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -// Copyright (c) 2018, Robert Marko - -#include "qcom-ipq4018-jalapeno.dtsi" - -/ { - model = "8devices Jalapeno"; - compatible = "8dev,jalapeno"; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi deleted file mode 100644 index 3af6de1f60..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi +++ /dev/null @@ -1,269 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -// Copyright (c) 2018, Robert Marko - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - counter@4a1000 { - compatible = "qcom,qca-gcnt"; - reg = <0x4a1000 0x4>; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - status = "okay"; - - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2: usb2@60f8800 { - status = "okay"; - }; - - usb3: usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - - switch_lan_bmp = <0x10>; /* lan port bitmap */ - }; - - edma@c080000 { - status = "okay"; - }; - }; -}; - -&tlmm { - mdio_pins: mdio_pinmux { - pinmux_1 { - pins = "gpio53"; - function = "mdio"; - }; - - pinmux_2 { - pins = "gpio52"; - function = "mdc"; - }; - - pinconf { - pins = "gpio52", "gpio53"; - bias-pull-up; - }; - }; - - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <2>; - bias-disable; - }; - - pin_cs { - function = "gpio"; - pins = "gpio54", "gpio59"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - status = "okay"; - - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>; - - flash@0 { - status = "okay"; - - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - - partition@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - - partition@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - - partition@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - - partition@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - - partition@e0000 { - label = "APPSBLENV"; /* uboot env*/ - reg = <0x000e0000 0x00010000>; - read-only; - }; - - partition@f0000 { - label = "APPSBL"; /* uboot */ - reg = <0x000f0000 0x00080000>; - read-only; - }; - - partition@170000 { - label = "ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - }; - }; - - spi-nand@1 { - status = "okay"; - - compatible = "spi-nand"; - reg = <1>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "ubi"; - reg = <0x00000000 0x08000000>; - }; - }; - }; -}; - -&blsp1_uart1 { - status = "okay"; - - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac0 { - qcom,poll_required = <1>; - qcom,poll_required_dynamic = <1>; - qcom,phy_mdio_addr = <3>; - vlan_tag = <1 0x10>; -}; - -&gmac1 { - qcom,poll_required = <1>; - qcom,poll_required_dynamic = <1>; - qcom,phy_mdio_addr = <4>; - vlan_tag = <2 0x20>; -}; - -&wifi0 { - status = "okay"; - - qcom,ath10k-calibration-variant = "8devices-Jalapeno"; -}; - -&wifi1 { - status = "okay"; - - qcom,ath10k-calibration-variant = "8devices-Jalapeno"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-meshpoint-one.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-meshpoint-one.dts deleted file mode 100644 index 2e21b55325..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-meshpoint-one.dts +++ /dev/null @@ -1,81 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/* Copyright (c) 2019, CRISIS INNOVATION LAB d.o.o. - * Author: Robert Marko - */ - -#include "qcom-ipq4018-jalapeno.dtsi" - -/ { - model = "Crisis Innovation Lab MeshPoint.One"; - compatible = "cilab,meshpoint-one"; - - aliases { - led-boot = &led_status; - led-failsafe = &led_status; - led-running = &led_status; - led-upgrade = &led_status; - }; - - soc { - i2c-gpio { - status = "okay"; - - #address-cells = <1>; - #size-cells = <0>; - - compatible = "i2c-gpio"; - gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) /* sda */ - &tlmm 4 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) /* scl */ - >; - - bme280@76 { - status = "okay"; - - compatible = "bosch,bme280"; - reg = <0x76>; - }; - - pcf2129@51 { - status = "okay"; - - compatible = "nxp,pcf2129"; - reg = <0x51>; - }; - - ina230@40 { - status = "okay"; - - compatible = "ti,ina230"; - reg = <0x40>; - shunt-resistor = <2000>; - }; - - ina230@44 { - status = "okay"; - - compatible = "ti,ina230"; - reg = <0x44>; - shunt-resistor = <2000>; - }; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_status: status { - label = "meshpoint-one:blue:status"; - gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>; - }; - }; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts deleted file mode 100644 index a8c144f928..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts +++ /dev/null @@ -1,337 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include -#include - -/ { - model = "ZyXEL NBG6617"; - compatible = "zyxel,nbg6617"; - - chosen { - /* - * the vendor u-boot adds root and mtdparts cmdline parameters - * which we don't want... but we have to overwrite them or else - * the kernel will take them at face value. - */ - bootargs-append = " mtdparts= root=31:13"; - }; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2@60f8800 { - status = "okay"; - - dwc3@6000000 { - #address-cells = <1>; - #size-cells = <0>; - - usb2_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - }; - }; - - usb3@8af8800 { - status = "okay"; - - dwc3@8a00000 { - #address-cells = <1>; - #size-cells = <0>; - - usb3_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - - usb3_port2: port@2 { - reg = <2>; - #trigger-source-cells = <0>; - }; - }; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - wlan { - label = "wlan"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - linux,code = ; - linux,input-type = ; - }; - - wps { - label = "wps"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - power: power { - label = "nbg6617:green:power"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - }; - - usb { - label = "nbg6617:green:usb"; - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>; - linux,default-trigger = "usbport"; - }; - - wlan2G { - label = "nbg6617:green:wlan2G"; - gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; - }; - - wlan5G { - label = "nbg6617:green:wlan5G"; - gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; - }; - - wps { - label = "nbg6617:green:wps"; - gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - spi_0_pins: spi_0_pinmux { - mux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - mux_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-low; - }; - }; - led_pins: led_pinmux { - mux { - pins = "gpio0", "gpio1", "gpio3", "gpio5", "gpio58"; - drive-strength = <0x8>; - bias-disable; - output-low; - }; - }; -}; - -&blsp1_spi1 { /* BLSP1 QUP1 */ - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - mx25l25635f@0 { - compatible = "mx25l25635f", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - status = "okay"; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition1@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition2@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition3@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition4@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition5@e0000 { - label = "APPSBL"; /* u-boot */ - reg = <0x000e0000 0x00080000>; - /* U-Boot Standalone App "zloader" is located at 0x64000 */ - read-only; - }; - partition6@160000 { - label = "APPSBLENV"; /* u-boot env */ - reg = <0x00160000 0x00010000>; - }; - partition7@170000 { - /* make a backup of this partition! */ - label = "ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - partition8@180000 { - label = "kernel"; - reg = <0x00180000 0x00400000>; - }; - partition9@580000 { - label = "dualflag"; - reg = <0x00580000 0x00010000>; - read-only; - }; - partition10@590000 { - label = "header"; - reg = <0x00590000 0x00010000>; - }; - partition11@5a0000 { - label = "romd"; - reg = <0x005a0000 0x00100000>; - read-only; - }; - partition12@6a0000 { - label = "not_root_data"; - /* - * for some strange reason, someone at ZyXEL - * had the "great" idea to put the rootfs_data - * in front of rootfs... Don't do that! - * As a result this one, full MebiByte remains - * unused. - */ - reg = <0x006a0000 0x00100000>; - }; - partition13@7a0000 { - label = "rootfs"; - reg = <0x007a0000 0x01860000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "ZyXEL-NBG6617"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "ZyXEL-NBG6617"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts deleted file mode 100644 index a0030f77ce..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts +++ /dev/null @@ -1,309 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "ASUS RT-AC58U"; - compatible = "asus,rt-ac58u"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x8000000>; - }; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - chosen { - bootargs-append = " ubi.mtd=UBI_DEV"; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb3@8af8800 { - status = "okay"; - - dwc3@8a00000 { - #address-cells = <1>; - #size-cells = <0>; - - usb3_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - - usb3_port2: port@2 { - reg = <2>; - #trigger-source-cells = <0>; - }; - }; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_power: status { - label = "rt-ac58u:blue:status"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - }; - - wan { - label = "rt-ac58u:blue:wan"; - gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; - }; - - wlan2G { - label = "rt-ac58u:blue:wlan2G"; - gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tpt"; - }; - - wlan5G { - label = "rt-ac58u:blue:wlan5G"; - gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy1tpt"; - }; - - usb { - label = "rt-ac58u:blue:usb"; - gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; - trigger-sources = <&usb3_port1>, <&usb3_port2>; - linux,default-trigger = "usbport"; - }; - - lan { - label = "rt-ac58u:blue:lan"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - mux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - mux_cs { - function = "gpio"; - pins = "gpio54", "gpio59"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp1_spi1 { /* BLSP1 QUP1 */ - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, - <&tlmm 59 GPIO_ACTIVE_HIGH>; - - flash@0 { - /* - * U-boot looks for "n25q128a11" node, - * if we don't have it, it will spit out the following warning: - * "ipq: fdt fixup unable to find compatible node". - */ - compatible = "jedec,spi-nor"; - reg = <0>; - linux,modalias = "m25p80", "mx25l1606e", "n25q128a11"; - spi-max-frequency = <30000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition@e0000 { - label = "APPSBLENV"; /* uboot env*/ - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition@f0000 { - label = "APPSBL"; /* uboot */ - reg = <0x000f0000 0x00080000>; - read-only; - }; - partition@170000 { - label = "ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - /* 0x00180000 - 0x00200000 unused */ - }; - }; - - spi-nand@1 { - compatible = "spi-nand"; - reg = <1>; - spi-max-frequency = <30000000>; - - /* - * U-boot looks for "spinand,mt29f" node, - * if we don't have it, it will spit out the following warning: - * "ipq: fdt fixup unable to find compatible node". - */ - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - /* - * TODO: change to label = "ubi" once we drop 4.14. - * also drop the bootargs-append and all the - * userspace CI_UBIPART="UBI_DEV" remains. - */ - label = "UBI_DEV"; - reg = <0x00000000 0x08000000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "RT-AC58U"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "RT-AC58U"; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts deleted file mode 100644 index 5932638da0..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts +++ /dev/null @@ -1,265 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * Copyright (c) 2018, David Bauer - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "ZyXEL WRE6606"; - compatible = "zyxel,wre6606"; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - chosen { - bootargs-append = " mtdparts="; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - qcom,num_gmac = <1>; - }; - }; - - leds { - compatible = "gpio-leds"; - - wps { - label = "wre6606:green:wps"; - gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; - }; - - wlan5g_green { - label = "wre6606:green:wlan5g"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - }; - - power: power { - label = "wre6606:green:power"; - gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; - }; - - wlan5g_red { - label = "wre6606:red:wlan5g"; - gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; - }; - - wlan2g_red { - label = "wre6606:red:wlan2g"; - gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; - }; - - wlan2g_green { - label = "wre6606:green:wlan2g"; - gpios = <&tlmm 59 GPIO_ACTIVE_HIGH>; - }; - }; - - keys { - compatible = "gpio-keys"; - - wps { - label = "wps"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - mx25l12805d@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - - partition1@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - - partition2@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - - partition3@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - - partition4@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - - partition5@E0000 { - label = "APPSBLENV"; - reg = <0x000e0000 0x00010000>; - read-only; - }; - - partition6@F0000 { - label = "APPSBL"; - reg = <0x000f0000 0x00080000>; - read-only; - }; - - partition7@170000 { - label = "ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - - partition8@180000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x00180000 0x00ce0000>; - }; - - partition9@e60000 { - label = "manufacture"; - reg = <0x00e60000 0x00050000>; - read-only; - }; - - partition10@eb0000 { - label = "storage"; - reg = <0x00eb0000 0x00150000>; - read-only; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "ZyXEL-WRE6606"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "ZyXEL-WRE6606"; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-a62.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-a62.dts deleted file mode 100644 index 25bbd6b332..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-a62.dts +++ /dev/null @@ -1,243 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * Copyright (c) 2017-2018, Sven Eckelmann - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "OpenMesh A62"; - compatible = "openmesh,a62"; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2: usb2@60f8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - switch_lan_bmp = <0x10>; - switch_wan_bmp = <0x20>; - - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - leds { - compatible = "gpio-leds"; - - red { - label = "a62:red:status"; - gpios = <&tlmm 43 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; - }; - - power: green { - label = "a62:green:status"; - gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; - }; - - blue { - label = "a62:blue:status"; - gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-off"; - }; - }; - - watchdog { - compatible = "linux,wdt-gpio"; - gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; - hw_algo = "toggle"; - /* hw_margin_ms is actually 300s but driver limits it to 60s */ - hw_margin_ms = <60000>; - always-running; - }; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - enable-usb-power { - gpio-hog; - gpios = <58 GPIO_ACTIVE_HIGH>; - output-low; - line-name = "enable USB2 power"; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - /* partitions are passed via bootloader */ - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac0 { - qcom,phy_mdio_addr = <3>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <1 0x10>; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&pcie0 { - status = "okay"; - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi2: wifi@1,0 { - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - qcom,ath10k-calibration-variant = "OM-A62"; - ieee80211-freq-limit = <5170000 5350000>; - }; - }; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "OM-A62"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "OM-A62"; - ieee80211-freq-limit = <5470000 5875000>; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts deleted file mode 100644 index 47202d28fe..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts +++ /dev/null @@ -1,21 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019-ap.dk04.1.dtsi" - -/ { - model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK04.1-C1"; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi deleted file mode 100644 index 9801354625..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi +++ /dev/null @@ -1,181 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019.dtsi" -#include - -/ { - model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1"; - compatible = "qcom,ipq4019"; - - soc { - rng@22000 { - status = "okay"; - }; - - pinctrl@1000000 { - serial_0_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - serial_1_pins: serial1_pinmux { - mux { - pins = "gpio8", "gpio9"; - function = "blsp_uart1"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - }; - pinmux_cs { - function = "gpio"; - pins = "gpio12"; - }; - pinconf { - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - pinconf_cs { - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - i2c_0_pins: i2c_0_pinmux { - pinmux { - function = "blsp_i2c0"; - pins = "gpio10", "gpio11"; - }; - pinconf { - pins = "gpio10", "gpio11"; - drive-strength = <16>; - bias-disable; - }; - }; - - nand_pins: nand_pins { - - pullups { - pins = "gpio52", "gpio53", "gpio58", - "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; - }; - - blsp_dma: dma@7884000 { - status = "okay"; - }; - - spi0: spi@78b5000 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - mx25l25635e@0 { - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; - compatible = "mx25l25635e"; - spi-max-frequency = <24000000>; - }; - }; - - i2c0: i2c@78b7000 { /* BLSP1 QUP2 */ - pinctrl-0 = <&i2c_0_pins>; - pinctrl-names = "default"; - - status = "okay"; - }; - - serial@78af000 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - serial@78b0000 { - pinctrl-0 = <&serial_1_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - usb3_ss_phy: ssphy@9a000 { - status = "okay"; - }; - - usb3_hs_phy: hsphy@a6000 { - status = "okay"; - }; - - usb3: usb3@8af8800 { - status = "okay"; - }; - - usb2_hs_phy: hsphy@a8000 { - status = "okay"; - }; - - usb2: usb2@60f8800 { - status = "okay"; - }; - - cryptobam: dma@8e04000 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - qpic_bam: dma@7984000 { - status = "okay"; - }; - - nand: qpic-nand@79b0000 { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - }; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts deleted file mode 100644 index f4c1685f47..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts +++ /dev/null @@ -1,354 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "MobiPromo CM520-79F"; - compatible = "mobipromo,cm520-79f"; - - aliases { - led-boot = &led_sys; - led-failsafe = &led_sys; - led-running = &led_sys; - led-upgrade = &led_sys; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; - reset-delay-us = <1000>; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2@60f8800 { - status = "okay"; - - dwc3@6000000 { - #address-cells = <1>; - #size-cells = <0>; - - usb2_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - }; - }; - - usb3@8af8800 { - status = "okay"; - - dwc3@8a00000 { - #address-cells = <1>; - #size-cells = <0>; - - usb3_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - - usb3_port2: port@2 { - reg = <2>; - #trigger-source-cells = <0>; - }; - }; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - led_spi { - compatible = "spi-gpio"; - #address-cells = <1>; - ranges; - - sck-gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>; - mosi-gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>; - num-chipselects = <0>; - - led_gpio: led_gpio@0 { - compatible = "fairchild,74hc595"; - reg = <0>; - gpio-controller; - #gpio-cells = <2>; - registers-number = <1>; - spi-max-frequency = <1000000>; - }; - }; - - leds { - compatible = "gpio-leds"; - - usb { - label = "cm520-79f:blue:usb"; - gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "usbport"; - trigger-sources = <&usb3_port1>, <&usb3_port2>, <&usb2_port1>; - }; - - led_sys: can { - label = "cm520-79f:blue:can"; - gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; - }; - - wan { - label = "cm520-79f:blue:wan"; - gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>; - }; - - lan1 { - label = "cm520-79f:blue:lan1"; - gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>; - }; - - lan2 { - label = "cm520-79f:blue:lan2"; - gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>; - }; - - wlan2g { - label = "cm520-79f:blue:wlan2g"; - gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy0tpt"; - }; - - wlan5g { - label = "cm520-79f:blue:wlan5g"; - gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy1tpt"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - status = "okay"; -}; - -&blsp1_uart2 { - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac0 { - mtd-mac-address = <&art 0x1006>; -}; - -&gmac1 { - mtd-mac-address = <&art 0x5006>; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x0 0x100000>; - read-only; - }; - - partition@100000 { - label = "MIBIB"; - reg = <0x100000 0x100000>; - read-only; - }; - - partition@200000 { - label = "BOOTCONFIG"; - reg = <0x200000 0x100000>; - }; - - partition@300000 { - label = "QSEE"; - reg = <0x300000 0x100000>; - read-only; - }; - - partition@400000 { - label = "QSEE_1"; - reg = <0x400000 0x100000>; - read-only; - }; - - partition@500000 { - label = "CDT"; - reg = <0x500000 0x80000>; - read-only; - }; - - partition@580000 { - label = "CDT_1"; - reg = <0x580000 0x80000>; - read-only; - }; - - partition@600000 { - label = "BOOTCONFIG1"; - reg = <0x600000 0x80000>; - }; - - partition@680000 { - label = "APPSBLENV"; - reg = <0x680000 0x80000>; - }; - - partition@700000 { - label = "APPSBL"; - reg = <0x700000 0x200000>; - read-only; - }; - - partition@900000 { - label = "APPSBL_1"; - reg = <0x900000 0x200000>; - read-only; - }; - - art: partition@b00000 { - label = "ART"; - reg = <0xb00000 0x80000>; - read-only; - }; - - partition@b80000 { - label = "ubi"; - reg = <0xb80000 0x7480000>; - }; - }; - }; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio52", "gpio53", "gpio58", - "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "CM520-79F"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "CM520-79F"; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c1.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c1.dts deleted file mode 100644 index df1df2529a..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c1.dts +++ /dev/null @@ -1,80 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT - * - * Copyright (c) 2018 Peng Zhang - * - */ - -#include "qcom-ipq4019-e2600ac.dtsi" -#include -#include - -/ { - model = "Qxwlan E2600AC c1"; - compatible = "qxwlan,e2600ac-c1"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; - - flash@0 { - reg = <0>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - partition@40000 { - label = "0:MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - partition@60000 { - label = "0:QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - partition@c0000 { - label = "0:CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - partition@d0000 { - label = "0:DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - partition@e0000 { - label = "0:APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - partition@f0000 { - label = "0:APPSBL"; - reg = <0xf0000 0x80000>; - read-only; - }; - partition@170000 { - label = "0:ART"; - reg = <0x170000 0x10000>; - read-only; - }; - partition@180000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x180000 0x1e80000>; - }; - }; - }; -}; - diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c2.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c2.dts deleted file mode 100644 index 9348ef4eec..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c2.dts +++ /dev/null @@ -1,115 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT - * - * Copyright (c) 2018 Peng Zhang - * - */ - -#include "qcom-ipq4019-e2600ac.dtsi" -#include -#include - -/ { - model = "Qxwlan E2600AC c2"; - compatible = "qxwlan,e2600ac-c2"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; - - flash@0 { - reg = <0>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - partition@40000 { - label = "0:MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - partition@60000 { - label = "0:QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - partition@c0000 { - label = "0:CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - partition@d0000 { - label = "0:DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - partition@e0000 { - label = "0:APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - partition@f0000 { - label = "0:APPSBL"; - reg = <0xf0000 0x80000>; - read-only; - }; - partition@170000 { - label = "0:ART"; - reg = <0x170000 0x10000>; - read-only; - }; - }; - }; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "ubi"; - reg = <0x00000000 0x04000000>; - }; - }; - }; -}; - -&tlmm { - nand_pins: nand-pins { - - pullups { - pins = "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; -}; - diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi deleted file mode 100644 index f4af2ba25f..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi +++ /dev/null @@ -1,266 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT - * - * Copyright (c) 2018 Peng Zhang - * - */ - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - - model = "Qxwlan E2600AC"; - compatible = "qcom,ipq4019"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; /* 256MB */ - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - status = "okay"; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2: usb2@60f8800 { - status = "okay"; - - dwc3@6000000 { - #address-cells = <1>; - #size-cells = <0>; - - usb2_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - }; - }; - - serial@78af000 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - serial@78b0000 { - pinctrl-0 = <&serial_1_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - i2c@78b7000 { /* BLSP1 QUP2 */ - pinctrl-0 = <&i2c_0_pins>; - pinctrl-names = "default"; - - status = "okay"; - }; - - usb3: usb3@8af8800 { - status = "okay"; - - dwc3@8a00000 { - #address-cells = <1>; - #size-cells = <0>; - - usb3_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - - usb3_port2: port@2 { - reg = <2>; - #trigger-source-cells = <0>; - }; - }; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - - leds { - compatible = "gpio-leds"; - - led1 { - label = "e2600ac:green:wlan0"; - gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; - }; - - led2 { - label = "e2600ac:green:wlan1"; - gpios = <&tlmm 36 GPIO_ACTIVE_LOW>; - }; - - led3 { - label = "e2600ac:green:usb"; - gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; - trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>; - linux,default-trigger = "usbport"; - }; - - led4 { - label = "e2600ac:green:ctrl1"; - gpios = <&tlmm 51 GPIO_ACTIVE_LOW>; - }; - - led5 { - label = "e2600ac:green:ctrl2"; - gpios = <&tlmm 30 GPIO_ACTIVE_LOW>; - }; - - led6 { - label = "e2600ac:green:ctrl3"; - gpios = <&tlmm 31 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - i2c_0_pins: i2c-0-pinmux { - mux { - pins = "gpio20", "gpio21"; - function = "blsp_i2c0"; - bias-disable; - }; - }; - - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial_0_pins: serial0-pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - serial_1_pins: serial1_pinmux { - mux { - pins = "gpio8", "gpio9"; - function = "blsp_uart1"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - pinmux_cs { - function = "gpio"; - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "Qxwlan-E2600AC"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "Qxwlan-E2600AC"; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-ea8300.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-ea8300.dts deleted file mode 100644 index cfc3037fb2..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-ea8300.dts +++ /dev/null @@ -1,399 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -/* - * Device Tree Source for Linksys EA8300 (Dallas) - * - * Copyright (C) 2019 Jeff Kletsky - * - */ - -/dts-v1/; - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "Linksys EA8300 (Dallas)"; - compatible = "linksys,ea8300", "qcom,ipq4019"; - - - aliases { - led-boot = &led_wps_amber; - led-failsafe = &led_wps; - led-running = &led_linksys; - led-upgrade = &led_world; - serial0 = &blsp1_uart1; - }; - - - leds { - compatible = "gpio-leds"; - - // Retain node names from running OEM on EA8300 - - // Front panel LEDs, top to bottom - - led_plug: diag { - label = "ea8300:amber:plug"; - gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; - }; - - led_world: internet { - label = "ea8300:amber:world"; - gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>; - }; - - led_wps: wps { - label = "ea8300:white:wps"; - gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; - }; - - led_wps_amber: wps_amber { - label = "ea8300:amber:wps"; - gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>; - panic-indicator; - }; - - led_linksys: pwr { - label = "ea8300:white:linksys"; - gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; - }; - - // On back panel, above USB socket - - led_usb: usb { - label = "ea8300:green:usb"; - gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; - trigger-sources = <&usb3_port1>, <&usb3_port2>, - <&usb2_port1>; - linux,default-trigger = "usbport"; - }; - }; - - - keys { - compatible = "gpio-keys"; - - button@0 { - label = "reset"; - linux,code = ; - gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; - }; - - button@1 { - label = "wps"; - linux,code = ; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - }; - }; - - - // - // OEM U-Boot provides either - // init=/sbin/init rootfstype=ubifs ubi.mtd=11,2048 \ - // root=ubi0:ubifs rootwait rw - // or the same with ubi.mtd=13,2048 - // - - chosen { - bootargs-append = " root=/dev/ubiblock0_0 rootfstype=squashfs ro"; - }; - - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2@60f8800 { - status = "okay"; - - dwc3@6000000 { - #address-cells = <1>; - #size-cells = <0>; - - usb2_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - }; - }; - - usb3@8af8800 { - status = "okay"; - - dwc3@8a00000 { - #address-cells = <1>; - #size-cells = <0>; - - usb3_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - - usb3_port2: port@2 { - reg = <2>; - #trigger-source-cells = <0>; - }; - }; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; -}; - - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - status = "okay"; - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - -}; - -&cryptobam { - status = "okay"; -}; - -&nand { - status = "okay"; - - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "sbl1"; - reg = <0x0 0x100000>; - read-only; - }; - - partition@100000 { - label = "mibib"; - reg = <0x100000 0x100000>; - read-only; - }; - - partition@200000 { - label = "qsee"; - reg = <0x200000 0x100000>; - read-only; - }; - - partition@300000 { - label = "cdt"; - reg = <0x300000 0x80000>; - read-only; - }; - - partition@380000 { - label = "appsblenv"; - reg = <0x380000 0x80000>; - read-only; - }; - - partition@400000 { - label = "ART"; - reg = <0x400000 0x80000>; - read-only; - }; - - partition@480000 { - label = "appsbl"; - reg = <0x480000 0x200000>; - read-only; - }; - - partition@680000 { - label = "u_env"; - reg = <0x680000 0x80000>; - // writable -- U-Boot environment - }; - - partition@700000 { - label = "s_env"; - reg = <0x700000 0x40000>; - // writable -- Boot counter records - }; - - partition@740000 { - label = "devinfo"; - reg = <0x740000 0x40000>; - read-only; - }; - - partition@780000 { - label = "kernel"; - reg = <0x780000 0x5800000>; - }; - - partition@a80000 { - label = "rootfs"; - reg = <0xa80000 0x5500000>; - }; - - partition@5f80000 { - label = "alt_kernel"; - reg = <0x5f80000 0x5800000>; - }; - - partition@6280000 { - label = "alt_rootfs"; - reg = <0x6280000 0x5500000>; - }; - - partition@b780000 { - label = "sysdiag"; - reg = <0xb780000 0x100000>; - read-only; - }; - - partition@b880000 { - label = "syscfg"; - reg = <0xb880000 0x4680000>; - read-only; - }; - }; - }; -}; - -&pcie0 { - status = "okay"; - - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi2: wifi@1,0 { - compatible = "qcom,ath10k"; - reg = <0x00010000 0 0 0 0>; - }; - }; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - serial_0_pins: serial0-pinmux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - // gpio61 controls led_usb - - pulldowns { - pins = "gpio55", "gpio56", "gpio57", - "gpio60", "gpio62", "gpio63", - "gpio64", "gpio65", "gpio66", - "gpio67", "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "linksys-ea8300-fcc"; -}; - -&wifi1 { - status = "okay"; - ieee80211-freq-limit = <5170000 5330000>; - qcom,ath10k-calibration-variant = "linksys-ea8300-fcc"; -}; - -&wifi2 { - status = "okay"; - ieee80211-freq-limit = <5490000 5835000>; - qcom,ath10k-calibration-variant = "linksys-ea8300-fcc"; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts deleted file mode 100644 index ec3ce447cc..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts +++ /dev/null @@ -1,282 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include - -/ { - model = "EnGenius EAP2200"; - compatible = "engenius,eap2200"; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - keys { - compatible = "gpio-keys"; - - wps { - label = "wps"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_power: power { - label = "eap2200:amber:power"; - gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; - }; - - lan1 { - label = "eap2200:blue:lan1"; - gpios = <&tlmm 44 GPIO_ACTIVE_LOW>; - }; - - lan2 { - label = "eap2200:blue:lan2"; - gpios = <&tlmm 45 GPIO_ACTIVE_LOW>; - }; - - wlan2g { - label = "eap2200:blue:wlan2g"; - gpios = <&tlmm 46 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy0tpt"; - }; - - wlan5g { - label = "eap2200:yellow:wlan5g"; - gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy1tpt"; - }; - - wlan5g2 { - label = "eap2200:yellow:wlan5g2"; - gpios = <&tlmm 48 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy2tpt"; - }; - - mode { - label = "eap2200:blue:mode"; - gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; - }; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - switch_lan_bmp = <0x10>; - }; - - edma@c080000 { - status = "okay"; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "0:SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition1@40000 { - label = "0:MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition2@60000 { - label = "0:QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition3@c0000 { - label = "0:CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition4@d0000 { - label = "0:DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition5@e0000 { - label = "0:APPSBLENV"; - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition6@f0000 { - label = "0:APPSBL"; - reg = <0x000f0000 0x00080000>; - read-only; - }; - partition7@170000 { - label = "0:ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac0 { - vlan_tag = <1 0x10>; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "rootfs1"; - reg = <0x00000000 0x04000000>; - }; - partition@40000000 { - label = "ubi"; - reg = <0x04000000 0x04000000>; - }; - - }; - }; -}; - -&pcie0 { - status = "okay"; - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi2: wifi@1,0 { - compatible = "qcom,ath10k"; - reg = <0x00010000 0 0 0 0>; - ieee80211-freq-limit = <5470000 5875000>; - qcom,ath10k-calibration-variant = "EnGenius-EAP2200"; - }; - }; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - nand_pins: nand_pins { - pullups { - pins = "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; - - serial_0_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - pinmux_cs { - function = "gpio"; - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "EnGenius-EAP2200"; -}; - -&wifi1 { - status = "okay"; - ieee80211-freq-limit = <5170000 5350000>; - qcom,ath10k-calibration-variant = "EnGenius-EAP2200"; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts deleted file mode 100644 index b04a61dc04..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts +++ /dev/null @@ -1,303 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "AVM FRITZ!Box 7530"; - compatible = "avm,fritzbox-7530"; - - aliases { - led-boot = &power_green; - led-failsafe = &info_red; - led-running = &power_green; - led-upgrade = &info_green; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - qcom,num_gmac = <1>; - }; - }; - - keys { - compatible = "gpio-keys"; - - wlan { - label = "wlan"; - gpios = <&tlmm 42 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&tlmm 41 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - dect { - label = "dect"; - gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - info_red: info_red { - label = "fritzbox-7530:red:info"; - gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; - }; - - info_green: info { - label = "fritzbox-7530:green:info"; - gpios = <&tlmm 33 GPIO_ACTIVE_LOW>; - }; - - wlan { - label = "fritzbox-7530:green:wlan"; - gpios = <&tlmm 34 GPIO_ACTIVE_LOW>; - }; - - fon { - label = "fritzbox-7530:green:fon"; - gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; - }; - - power_green: power { - label = "fritzbox-7530:green:power"; - gpios = <&tlmm 39 GPIO_ACTIVE_LOW>; - }; - - wps { - label = "fritzbox-7530:green:wps"; - gpios = <&tlmm 45 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&tlmm { - serial_0_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; - - usb-power { - line-name = "enable USB3 power"; - gpios = <49 GPIO_ACTIVE_HIGH>; - gpio-hog; - output-high; - }; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x000000 0x80000>; - read-only; - }; - - partition@80000 { - label = "MIBIB"; - reg = <0x080000 0x80000>; - read-only; - }; - - partition@100000 { - label = "QSEE"; - reg = <0x100000 0x80000>; - read-only; - }; - - partition@180000 { - label = "CDT"; - reg = <0x180000 0x40000>; - read-only; - }; - - partition@1c0000 { - label = "QSEE_B"; - reg = <0x1c0000 0x80000>; - read-only; - }; - - partition@240000 { - label = "urlader0"; - reg = <0x240000 0x40000>; - read-only; - }; - - partition@280000 { - label = "urlader1"; - reg = <0x280000 0x40000>; - read-only; - }; - - partition@2c0000 { - label = "nand-tffs"; - reg = <0x2c0000 0x840000>; - read-only; - }; - - partition@b00000 { - /* 'kernel1' in AVM firmware */ - label = "uboot0"; - reg = <0xb00000 0x400000>; - }; - - partition@f00000 { - /* 'kernel2' in AVM firmware */ - label = "uboot1"; - reg = <0xf00000 0x400000>; - }; - - partition@1300000 { - label = "ubi"; - reg = <0x1300000 0x6d00000>; - }; - }; - }; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "AVM-FRITZBox-7530"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "AVM-FRITZBox-7530"; -}; - -&pcie0 { - status = "okay"; - - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - dsl@1,0 { - compatible = "intel,vrx518"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - }; - }; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts deleted file mode 100644 index e9b96b996a..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts +++ /dev/null @@ -1,267 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "AVM FRITZ!Repeater 1200"; - compatible = "avm,fritzrepeater-1200"; - - aliases { - led-boot = &power_green; - led-failsafe = &power_red; - led-running = &power_green; - led-upgrade = &power_red; - label-mac-device = &wifi0; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */ - switch_lan_bmp = <0x0>; /* lan port bitmap */ - switch_wan_bmp = <0x10>; /* wan port bitmap */ - }; - - edma@c080000 { - status = "okay"; - phy-mode = "rgmii-rxid"; - qcom,num_gmac = <1>; - qcom,single-phy; - }; - }; - - key { - compatible = "gpio-keys"; - - wps { - label = "WPS button"; - gpios = <&tlmm 10 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - power_red: power_red { - label = "fritzwlan-1200:red:power"; - gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; - }; - - power_green: power_green { - label = "fritzwlan-1200:green:power"; - gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; - }; - - power_yellow { - label = "fritzwlan-1200:yellow:power"; - gpios = <&tlmm 49 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&tlmm { - serial_0_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; - - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - phy-reset { - line-name = "PHY-reset"; - gpios = <19 GPIO_ACTIVE_HIGH>; - gpio-hog; - output-high; - }; - - phy-reset-2 { - line-name = "PHY-reset-2"; - gpios = <47 GPIO_ACTIVE_HIGH>; - gpio-hog; - output-high; - }; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x0 0x80000>; - read-only; - }; - - partition@80000 { - label = "MIBIB"; - reg = <0x80000 0x80000>; - read-only; - }; - - partition@100000 { - label = "QSEE"; - reg = <0x100000 0x80000>; - read-only; - }; - - partition@180000 { - label = "CDT"; - reg = <0x180000 0x40000>; - read-only; - }; - - partition@1c0000 { - label = "QSEE_B"; - reg = <0x1c0000 0x80000>; - read-only; - }; - - partition@240000 { - label = "urlader0"; - reg = <0x240000 0x40000>; - read-only; - }; - - partition@280000 { - label = "urlader1"; - reg = <0x280000 0x40000>; - read-only; - }; - - partition@2c0000 { - label = "nand-tffs"; - reg = <0x2c0000 0x840000>; - read-only; - }; - - partition@b00000 { - /* 'kernel1' in AVM firmware */ - label = "uboot0"; - reg = <0xb00000 0x400000>; - }; - - partition@f00000 { - /* 'kernel2' in AVM firmware */ - label = "uboot1"; - reg = <0xf00000 0x400000>; - }; - - partition@1300000 { - label = "ubi"; - reg = <0x1300000 0x6d00000>; - }; - }; - }; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200"; -}; - -&gmac0 { - qcom,phy_mdio_addr = <0>; - qcom,poll_required = <1>; - vlan_tag = <0 0x20>; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts deleted file mode 100644 index 6914917eb3..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts +++ /dev/null @@ -1,264 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "AVM FRITZ!Repeater 3000"; - compatible = "avm,fritzrepeater-3000"; - - aliases { - led-boot = &power_led; - led-failsafe = &power_led; - led-running = &power_led; - led-upgrade = &power_led; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - - switch_lan_bmp = <0x10>; - switch_wan_bmp = <0x20>; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - key { - compatible = "gpio-keys"; - - connect { - label = "Connect"; - gpios = <&tlmm 10 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - connect_red { - label = "fritzwlan-3000:red:connect"; - gpios = <&tlmm 30 GPIO_ACTIVE_LOW>; - }; - - connect_green { - label = "fritzwlan-3000:green:connect"; - gpios = <&tlmm 31 GPIO_ACTIVE_LOW>; - }; - - connect_blue { - label = "fritzwlan-3000:blue:connect"; - gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; - }; - - power_led: power { - label = "fritzwlan-3000:green:power"; - gpios = <&tlmm 33 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&tlmm { - serial_0_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x000000 0x80000>; - read-only; - }; - - partition@80000 { - label = "MIBIB"; - reg = <0x080000 0x80000>; - read-only; - }; - - partition@100000 { - label = "QSEE"; - reg = <0x100000 0x80000>; - read-only; - }; - - partition@180000 { - label = "CDT"; - reg = <0x180000 0x40000>; - read-only; - }; - - partition@1c0000 { - label = "QSEE_B"; - reg = <0x1c0000 0x80000>; - read-only; - }; - - partition@240000 { - label = "urlader0"; - reg = <0x240000 0x40000>; - read-only; - }; - - partition@280000 { - label = "urlader1"; - reg = <0x280000 0x40000>; - read-only; - }; - - partition@2c0000 { - label = "nand-tffs"; - reg = <0x2c0000 0x840000>; - read-only; - }; - - partition@b00000 { - /* 'kernel1' in AVM firmware */ - label = "uboot0"; - reg = <0xb00000 0x400000>; - }; - - partition@f00000 { - /* 'kernel2' in AVM firmware */ - label = "uboot1"; - reg = <0xf00000 0x400000>; - }; - - partition@1300000 { - label = "ubi"; - reg = <0x1300000 0x6d00000>; - }; - }; - }; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - /* BDFs are identical for the FRITZ!Box 7530 and the FRITZ!Repeater 3000 */ - qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-3000"; -}; - -&wifi1 { - status = "okay"; - ieee80211-freq-limit = <5170000 5350000>; - /* BDFs are identical for the FRITZ!Box 7530 and the FRITZ!Repeater 3000 */ - qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-3000"; -}; - -&pcie0 { - status = "okay"; - - perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - /* QCA9984 */ - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - ieee80211-freq-limit = <5470000 5875000>; - /* Uses the reference BDF */ - }; - }; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts deleted file mode 100644 index 8fe7644a9b..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts +++ /dev/null @@ -1,357 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/* Copyright (c) 2019, Robert Marko */ - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "8devices Habanero DVK"; - compatible = "8dev,habanero-dvk"; - - aliases { - led-boot = &led_status; - led-failsafe = &led_status; - led-running = &led_status; - led-upgrade = &led_upgrade; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - counter@4a1000 { - compatible = "qcom,qca-gcnt"; - reg = <0x4a1000 0x4>; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - status = "okay"; - - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2: usb2@60f8800 { - status = "okay"; - }; - - usb3: usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_status: status { - label = "habanero-dvk:green:status"; - gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; - panic-indicator; - }; - - led_upgrade: upgrade { - label = "habanero-dvk:green:upgrade"; - gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>; - }; - - wlan2g { - label = "habanero-dvk:green:wlan2g"; - gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tpt"; - }; - - wlan5g { - label = "habanero-dvk:green:wlan5g"; - gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy1tpt"; - }; - }; -}; - -&vqmmc { - status = "okay"; -}; - -&sdhci { - status = "okay"; - - pinctrl-0 = <&sd_pins>; - pinctrl-names = "default"; - cd-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>; - vqmmc-supply = <&vqmmc>; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - - pinmux_cs { - function = "gpio"; - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio52", "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", "gpio57", - "gpio60", "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", "gpio68", - "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; - - sd_pins: sd_pins { - pinmux { - function = "sdio"; - pins = "gpio23", "gpio24", "gpio25", "gpio26", - "gpio28", "gpio29", "gpio30", "gpio31"; - drive-strength = <10>; - }; - - pinmux_sd_clk { - function = "sdio"; - pins = "gpio27"; - drive-strength = <16>; - }; - - pinmux_sd7 { - function = "sdio"; - pins = "gpio32"; - drive-strength = <10>; - bias-disable; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - status = "okay"; - - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - spi-max-frequency = <24000000>; - reg = <0>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition@40000 { - label = "MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition@60000 { - label = "QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition@c0000 { - label = "CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition@d0000 { - label = "DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition@e0000 { - label = "APPSBLENV"; /* uboot env */ - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition@f0000 { - label = "APPSBL"; /* uboot */ - reg = <0x000f0000 0x00080000>; - read-only; - }; - partition@170000 { - label = "ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - partition@180000 { - label = "cfg"; - reg = <0x00180000 0x00040000>; - }; - partition@1c0000 { - label = "firmware"; - compatible = "denx,fit"; - reg = <0x001c0000 0x01e40000>; - }; - }; - }; -}; - -/* Some DVK boards ship without NAND */ -&nand { - status = "okay"; - - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; -}; - -&blsp1_uart1 { - status = "okay"; - - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; -}; - -&cryptobam { - status = "okay"; -}; - -&pcie0 { - status = "okay"; - - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - - /* Free slot for use */ - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - }; -}; - -&wifi0 { - status = "okay"; - - qcom,ath10k-calibration-variant = "8devices-Habanero"; -}; - -&wifi1 { - status = "okay"; - - qcom,ath10k-calibration-variant = "8devices-Habanero"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts deleted file mode 100644 index a063f8e952..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts +++ /dev/null @@ -1,311 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT -/dts-v1/; - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "ASUS Lyra MAP-AC2200"; - compatible = "asus,map-ac2200"; - - aliases { - led-boot = &led_blue0; - led-failsafe = &led_red0; - led-running = &led_blue0; - led-upgrade = &led_red0; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2@60f8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 34 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x0 0x80000>; - read-only; - }; - - partition@80000 { - label = "MIBIB"; - reg = <0x80000 0x80000>; - read-only; - }; - - partition@100000 { - label = "QSEE"; - reg = <0x100000 0x100000>; - read-only; - }; - - partition@200000 { - label = "CDT"; - reg = <0x200000 0x80000>; - read-only; - }; - - partition@280000 { - label = "APPSBL"; - reg = <0x280000 0x140000>; - read-only; - }; - - partition@3c0000 { - label = "APPSBLENV"; - reg = <0x3c0000 0x40000>; - read-only; - }; - - partition@400000 { - label = "ubi"; - reg = <0x400000 0x7c00000>; - }; - }; - }; -}; - -&tlmm { - i2c_0_pins: i2c_0_pinmux { - pinmux { - function = "blsp_i2c0"; - pins = "gpio20", "gpio21"; - drive-strength = <16>; - bias-disable; - }; - }; - - serial_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio52", "gpio53", "gpio58", - "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp_dma { - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200"; - ieee80211-freq-limit = <5470000 5875000>; -}; - -&pcie0 { - status = "okay"; - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi2: wifi@1,0 { - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200"; - ieee80211-freq-limit = <5170000 5350000>; - }; - }; -}; - -&usb2_hs_phy { - /* Bluetooth module attached via USB */ - status = "okay"; -}; - -&blsp1_i2c3 { - pinctrl-0 = <&i2c_0_pins>; - pinctrl-names = "default"; - status = "okay"; - - led-controller@32 { - /* 9-channel RGB LED controller */ - compatible = "national,lp5523"; - reg = <0x32>; - clock-mode = [01]; - - led_blue0: blue0 { - chan-name = "blue0"; - label = "map-ac2200:blue:chan0"; - led-cur = [fa]; - max-cur = [ff]; - }; - - blue1 { - chan-name = "blue1"; - label = "map-ac2200:blue:chan1"; - led-cur = [fa]; - max-cur = [ff]; - }; - - blue2 { - chan-name = "blue2"; - label = "map-ac2200:blue:chan2"; - led-cur = [fa]; - max-cur = [ff]; - }; - - led_green0: green0 { - chan-name = "green0"; - label = "map-ac2200:green:chan0"; - led-cur = [fa]; - max-cur = [ff]; - }; - - green1 { - chan-name = "green1"; - label = "map-ac2200:green:chan1"; - led-cur = [fa]; - max-cur = [ff]; - }; - - green2 { - chan-name = "green2"; - label = "map-ac2200:green:chan2"; - led-cur = [fa]; - max-cur = [ff]; - }; - - led_red0: red0 { - chan-name = "red0"; - label = "map-ac2200:red:chan0"; - led-cur = [fa]; - max-cur = [ff]; - }; - - red1 { - chan-name = "red1"; - label = "map-ac2200:red:chan1"; - led-cur = [fa]; - max-cur = [ff]; - }; - - red2 { - chan-name = "red2"; - label = "map-ac2200:red:chan2"; - led-cur = [fa]; - max-cur = [ff]; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts deleted file mode 100644 index 2f17424e55..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts +++ /dev/null @@ -1,385 +0,0 @@ -// SPDX-License-Identifier: ISC -// Copyright (c) 2015, The Linux Foundation. All rights reserved. -// Copyright (c) 2019, Cezary Jackiewicz . -// Copyright (c) 2020, Pawel Dembicki . - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "Cell C RTL30VW"; - compatible = "cellc,rtl30vw"; - - aliases { - led-boot = &led_power_blue; - led-failsafe = &led_power_red; - led-running = &led_power_blue; - led-upgrade = &led_power_red; - }; - - chosen { - bootargs-append = "ubi.mtd=ubifs root=/dev/ubiblock0_0 rootfstype=squashfs ro"; - }; - - led_spi { - compatible = "spi-gpio"; - #address-cells = <1>; - #size-cells = <0>; - num-chipselects = <1>; - - mosi-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; - cs-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; - sck-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; - - led_gpio: led_gpio@0 { - compatible = "fairchild,74hc595"; - reg = <0>; - gpio-controller; - #gpio-cells = <2>; - registers-number = <2>; - spi-max-frequency = <1000000>; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_power_blue: power_blue { - gpios = <&led_gpio 0 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:power"; - default-state = "on"; - }; - - led_power_red: power_red { - gpios = <&led_gpio 1 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:red:power"; - }; - - tp28 { - gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>; - label = "rtl30vw:ext:tp28"; - default-state = "keep"; - }; - - tp27 { - gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>; - label = "rtl30vw:ext:tp27"; - default-state = "keep"; - }; - - wlan2g { - gpios = <&led_gpio 8 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:wlan2g"; - linux,default-trigger = "phy0tpt"; - }; - - wlan5g { - gpios = <&led_gpio 9 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:wlan5g"; - linux,default-trigger = "phy1tpt"; - }; - - wps { - gpios = <&led_gpio 10 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:wps"; - }; - - voip { - gpios = <&led_gpio 11 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:voip"; - }; - - s1 { - gpios = <&led_gpio 12 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:s1"; - }; - - s2 { - gpios = <&led_gpio 13 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:s2"; - }; - - s3 { - gpios = <&led_gpio 14 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:s3"; - }; - - s4 { - gpios = <&led_gpio 15 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:blue:s4"; - }; - - signal { - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - label = "rtl30vw:red:signal"; - }; - }; - - keys { - compatible = "gpio-keys"; - - wps { - label = "wps"; - linux,code = ; - gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; - }; - - reset { - label = "reset"; - linux,code = ; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - }; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - status = "okay"; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2@60f8800 { - status = "okay"; - }; - - usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>; - - flash@0 { - /*"n25q128a11" is required for proper nand recognition in u-boot. */ - compatible = "jedec,spi-nor", "n25q128a11"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "0:MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - - partition@60000 { - label = "0:QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - - partition@c0000 { - label = "0:CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - - partition@d0000 { - label = "0:DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - - partition@e0000 { - label = "0:APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - - partition@f0000 { - label = "0:APPSBL"; - reg = <0xf0000 0x80000>; - read-only; - }; - - partition@170000 { - label = "0:ART"; - reg = <0x170000 0x10000>; - read-only; - }; - - partition@180000 { - label = "0:BOOTCONFIG"; - reg = <0x180000 0x10000>; - read-only; - }; - }; - }; - - flash@1 { - /* - * Factory U-boot looks in 0:BOOTCONFIG partition for active - * partitions settings and mangle partition config. So kernel - * /kernel_1 and rootfs/rootfs_1 pairs can be swaped. - * It isn't a problem but we never can be sure where OFW put - * factory images. "spinand,mt29f" value is required for proper - * nand recognition in u-boot. - */ - compatible = "spi-nand","spinand,mt29f"; - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "kernel"; - reg = <0x0 0x400000>; - }; - - partition@400000 { - label = "rootfs"; - reg = <0x400000 0x2000000>; - }; - - partition@2400000 { - label = "kernel_1"; - reg = <0x2400000 0x400000>; - }; - - partition@2800000 { - label = "rootfs_1"; - reg = <0x2800000 0x2000000>; - }; - - partition@4800000 { - label = "ubifs"; - reg = <0x4800000 0x3800000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - - pinmux_cs { - function = "gpio"; - pins = "gpio54", "gpio59"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "cellc,rtl30vw"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "cellc,rtl30vw"; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-u4019-32m.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-u4019-32m.dts deleted file mode 100644 index 63fbfb65c1..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-u4019-32m.dts +++ /dev/null @@ -1,79 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -/dts-v1/; - -#include "qcom-ipq4019-u4019.dtsi" -#include -#include - -/ { - model = "Unielec U4019 (32M)"; - compatible = "unielec,u4019-32m","unielec,u4019","qcom,ipq4019"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; - - flash@0 { - reg = <0>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <24000000>; - broken-flash-reset; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - partition@40000 { - label = "0:MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - partition@60000 { - label = "0:QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - partition@c0000 { - label = "0:CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - partition@d0000 { - label = "0:DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - partition@e0000 { - label = "0:APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - partition@f0000 { - label = "0:APPSBL"; - reg = <0xf0000 0x80000>; - read-only; - }; - partition@170000 { - label = "0:ART"; - reg = <0x170000 0x10000>; - read-only; - }; - partition@180000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x180000 0x1e80000>; - }; - }; - }; -}; - diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi deleted file mode 100644 index c768e25ca0..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi +++ /dev/null @@ -1,224 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - compatible = "unielec,u4019","qcom,ipq4019"; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; - reset-delay-us = <2000>; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - status = "okay"; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2@60f8800 { - status = "okay"; - - dwc3@6000000 { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - }; - }; - - usb3@8af8800 { - status = "okay"; - - dwc3@8a00000 { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; - - port@2 { - reg = <2>; - #trigger-source-cells = <0>; - }; - }; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - - aliases { - led-boot = &led_status; - led-failsafe = &led_status; - led-running = &led_status; - led-upgrade = &led_status; - serial0 = &blsp1_uart1; - serial1 = &blsp1_uart2; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - led_status: led2 { - label = "u4019:green:led2"; - gpios = <&tlmm 68 GPIO_ACTIVE_LOW>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&blsp1_uart2 { - pinctrl-0 = <&serial_1_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial_0_pins: serial0-pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - serial_1_pins: serial1_pinmux { - mux { - pins = "gpio8", "gpio9"; - function = "blsp_uart1"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - - pinmux_cs { - function = "gpio"; - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - led_pins: led_pinmux { - mux { - function = "gpio"; - pins = "gpio68"; - bias-disabled; - output-low; - }; - }; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; -}; - -&wifi1 { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts deleted file mode 100644 index 3a0e0b8cfa..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts +++ /dev/null @@ -1,375 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * Copyright (c) 2019, Nguyen Dinh Phi - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "Compex WPJ419"; - compatible = "compex,wpj419", "qcom,ipq4019"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - reserved-memory { - ranges; - rsvd1@87000000 { - /* Reserved for other subsystem */ - reg = <0x87000000 0x500000>; - no-map; - }; - wifi_dump@87500000 { - reg = <0x87500000 0x600000>; - no-map; - }; - - rsvd2@87B00000 { - /* Reserved for other subsystem */ - reg = <0x87B00000 0x500000>; - no-map; - }; - }; - - chosen { - bootargs-append = " ubi.mtd=ubi root=/dev/ubiblock0_1 clk_ignore_unused"; - }; - - soc { - pinctrl@1000000 { - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial_0_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - serial_1_pins: serial1_pinmux { - mux { - pins = "gpio8", "gpio9", "gpio10", "gpio11"; - function = "blsp_uart1"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - bias-disable; - }; - - pinmux_cs { - function = "gpio"; - pins = "gpio12"; - bias-disable; - output-high; - }; - }; - - i2c_0_pins: i2c_0_pinmux { - mux { - pins = "gpio20", "gpio21"; - function = "blsp_i2c0"; - bias-disable; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio52", "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; - - led_0_pins: led0_pinmux { - mux_1 { - pins = "gpio36"; - function = "led0"; - bias-pull-down; - }; - mux_2 { - pins = "gpio40"; - function = "led4"; - bias-pull-down; - }; - }; - }; - - blsp_dma: dma@7884000 { - status = "okay"; - }; - - spi_0: spi@78b5000 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 41 GPIO_ACTIVE_HIGH>; - num-cs = <2>; - - flash0@0 { - reg = <0>; - compatible = "jedec,spi-nor"; - spi-max-frequency = <24000000>; - broken-flash-reset; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x000000 0x040000>; - read-only; - }; - - partition@40000 { - label = "0:MIBIB"; - reg = <0x040000 0x020000>; - read-only; - }; - - partition@60000 { - label = "0:QSEE"; - reg = <0x060000 0x060000>; - read-only; - }; - - partition@c0000 { - label = "0:CDT"; - reg = <0x0c0000 0x010000>; - read-only; - }; - - partition@d0000 { - label = "0:DDRPARAMS"; - reg = <0x0d0000 0x010000>; - read-only; - }; - - partition@e0000 { - label = "u-boot-env"; - reg = <0x0e0000 0x010000>; - }; - - partition@f0000 { - label = "u-boot"; - reg = <0x0f0000 0x080000>; - read-only; - }; - - partition@170000 { - label = "0:ART"; - reg = <0x170000 0x010000>; - read-only; - }; - }; - }; - - nand@1 { - reg = <1>; - status = "okay"; - compatible = "spi-nand"; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - /* The device has 128MB, but we can only address - * 64MB because of the bootloader's default settings. - * This is due to the old mt29f driver, - * which detected the deivce with only 64MB - */ - partition@0 { - label = "ubi"; - reg = <0x0000000 0x4000000>; - }; - }; - }; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; - reset-delay-us = <5000>; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - i2c_0: i2c@78b7000 { - pinctrl-0 = <&i2c_0_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - serial@78af000 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - serial@78b0000 { - pinctrl-0 = <&serial_1_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - - usb3_ss_phy: ssphy@9a000 { - status = "okay"; - }; - - usb3_hs_phy: hsphy@a6000 { - status = "okay"; - }; - - usb3: usb3@8af8800 { - status = "okay"; - }; - - usb2_hs_phy: hsphy@a8000 { - status = "okay"; - }; - - usb2: usb2@60f8800 { - status = "okay"; - }; - - cryptobam: dma@8e04000 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - switch_lan_bmp = <0x1e>; - switch_wan_bmp = <0x20>; - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - - qpic_bam: dma@7984000 { - status = "okay"; - }; - - pcie0: pci@40000000 { - status = "okay"; - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - }; - - nand: qpic-nand@79b0000 { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - }; - }; -}; - -&gmac0 { - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <2 0x20>; -}; - -&gmac1 { - qcom,phy_mdio_addr = <3>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <1 0x10>; -}; - -&wifi0 { - status = "okay"; -}; - -&wifi1 { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts deleted file mode 100644 index 1bcf5e80bf..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts +++ /dev/null @@ -1,288 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * Copyright (c) 2017, Christian Mehlis - * Copyright (c) 2017-2018, Sven Eckelmann - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "Compex WPJ428"; - compatible = "compex,wpj428"; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; - reset-delay-us = <2000>; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2: usb2@60f8800 { - status = "okay"; - }; - - usb3: usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - switch_lan_bmp = <0x10>; - switch_wan_bmp = <0x20>; - - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - aliases { - led-boot = &status; - led-failsafe = &status; - led-upgrade = &status; - }; - - leds { - compatible = "gpio-leds"; - - status: rss4 { - label = "wpj428:green:rss4"; - gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; - }; - - rss3 { - label = "wpj428:green:rss3"; - gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; - }; - }; - - beeper: beeper { - compatible = "gpio-beeper"; - gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; - }; -}; - -&tlmm { - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio53"; - function = "mdio"; - bias-pull-up; - }; - - mux_2 { - pins = "gpio52"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - m25p80@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition0@0 { - label = "0:SBL1"; - reg = <0x00000000 0x00040000>; - read-only; - }; - partition1@40000 { - label = "0:MIBIB"; - reg = <0x00040000 0x00020000>; - read-only; - }; - partition2@60000 { - label = "0:QSEE"; - reg = <0x00060000 0x00060000>; - read-only; - }; - partition3@c0000 { - label = "0:CDT"; - reg = <0x000c0000 0x00010000>; - read-only; - }; - partition4@d0000 { - label = "0:DDRPARAMS"; - reg = <0x000d0000 0x00010000>; - read-only; - }; - partition5@e0000 { - label = "0:APPSBLENV"; /* uboot env*/ - reg = <0x000e0000 0x00010000>; - read-only; - }; - partition5@f0000 { - label = "0:APPSBL"; /* uboot */ - reg = <0x000f0000 0x00080000>; - read-only; - }; - partition5@170000 { - label = "0:ART"; - reg = <0x00170000 0x00010000>; - read-only; - }; - partition6@180000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x00180000 0x01e80000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac0 { - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <2 0x20>; -}; - -&gmac1 { - qcom,phy_mdio_addr = <3>; - qcom,poll_required = <1>; - qcom,forced_speed = <1000>; - qcom,forced_duplex = <1>; - vlan_tag = <1 0x10>; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; -}; - -&wifi1 { - status = "okay"; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts deleted file mode 100644 index 126d944ebb..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts +++ /dev/null @@ -1,180 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 OR MIT - -#include "qcom-ipq4029-aruba-glenmorangie.dtsi" -#include - -/ { - model = "Aruba AP-303"; - compatible = "aruba,ap-303"; - - aliases { - led-boot = &led_system_green; - led-failsafe = &led_system_red; - led-running = &led_system_green; - led-upgrade = &led_system_red; - }; - - leds { - compatible = "gpio-leds"; - - wifi_green { - label = "ap-303:green:wifi"; - gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tpt"; - }; - - wifi_amber { - label = "ap-303:amber:wifi"; - gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy1tpt"; - }; - - led_system_red: system_red { - label = "ap-303:red:system"; - gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; - }; - - led_system_green: system_green { - label = "ap-303:green:system"; - gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&tlmm { - /* - * In addition to the Pins listed below, - * the following GPIOs have "features": - * 54 - out - active low to force HW reset - * 41 - out - active low to reset TPM - * 43 - out - active low to reset BLE radio - * 19 - in - active high when DC powered - */ - - phy-reset { - line-name = "PHY-reset"; - gpios = <42 GPIO_ACTIVE_HIGH>; - gpio-hog; - output-high; - }; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - /* - * There is no partition map for the NOR flash - * in the stock firmware. - * - * All partitions here are based on offsets - * found in the U-Boot GPL code and information - * from smem. - */ - - partition@0 { - label = "sbl1"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "mibib"; - reg = <0x40000 0x20000>; - read-only; - }; - - partition@60000 { - label = "qsee"; - reg = <0x60000 0x60000>; - read-only; - }; - - partition@c0000 { - label = "cdt"; - reg = <0xc0000 0x10000>; - read-only; - }; - - partition@d0000 { - label = "ddrparams"; - reg = <0xd0000 0x10000>; - read-only; - }; - - partition@e0000 { - label = "ART"; - reg = <0xe0000 0x10000>; - read-only; - }; - - partition@f0000 { - label = "appsbl"; - reg = <0xf0000 0xf0000>; - read-only; - }; - - partition@1e0000 { - label = "mfginfo"; - reg = <0x1e0000 0x10000>; - read-only; - }; - - partition@1f0000 { - label = "apcd"; - reg = <0x1f0000 0x10000>; - read-only; - }; - - partition@200000 { - label = "osss"; - reg = <0x200000 0x180000>; - read-only; - }; - - partition@380000 { - /* This is empty */ - label = "appsblenv"; - reg = <0x380000 0x10000>; - read-only; - }; - - partition@390000 { - label = "pds"; - reg = <0x390000 0x10000>; - read-only; - }; - - partition@3a0000 { - label = "fcache"; - reg = <0x3a0000 0x10000>; - read-only; - }; - - partition@3b0000 { - /* Called osss1 in smem */ - label = "u-boot-env-bak"; - reg = <0x3b0000 0x10000>; - read-only; - }; - - partition@3f0000 { - label = "u-boot-env"; - reg = <0x3f0000 0x10000>; - read-only; - }; - }; - }; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts deleted file mode 100644 index 1f7a728492..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts +++ /dev/null @@ -1,421 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "Aruba AP-303H"; - compatible = "aruba,ap-303h"; - - aliases { - led-boot = &led_system_green; - led-failsafe = &led_system_red; - led-running = &led_system_green; - led-upgrade = &led_system_amber; - }; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - - reset-gpios = <&tlmm 19 GPIO_ACTIVE_LOW>; - reset-delay-us = <2000>; - }; - - counter@4a1000 { - compatible = "qcom,qca-gcnt"; - reg = <0x4a1000 0x4>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2@60f8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - }; - - edma@c080000 { - status = "okay"; - }; - - i2c_0: i2c@78b7000 { - pinctrl-0 = <&i2c_0_pins>; - pinctrl-names = "default"; - status = "okay"; - - tpm@29 { - /* No Driver */ - compatible = "atmel,at97sc3203"; - reg = <0x29>; - read-only; - }; - - power-monitor@40 { - /* No driver */ - compatible = "isl,isl28022"; - reg = <0x40>; - }; - }; - }; - - leds { - compatible = "gpio-leds"; - - wifi_green { - label = "ap-303h:green:wifi"; - gpios = <&tlmm 27 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tpt"; - }; - - wifi_amber { - label = "ap-303h:amber:wifi"; - gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy1tpt"; - }; - - pse { - label = "ap-303h:green:pse"; - gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; - }; - - led_system_red: system_red { - label = "ap-303h:red:system"; - gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>; - }; - - led_system_green: system_green { - label = "ap-303h:green:system"; - gpios = <&tlmm 24 GPIO_ACTIVE_HIGH>; - }; - - led_system_amber: system_amber { - label = "ap-303h:amber:system"; - gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "Reset button"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&blsp1_uart2 { - /* Texas Instruments CC2540T BLE radio */ - pinctrl-0 = <&serial_1_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - /* - * In addition to the Pins listed below, - * the following GPIOs have "features": - * 39 - out - active low to force HW reset - * 32 - out - active low to reset TPM - * 43 - out - active low to reset BLE radio - * 41 - out - pulse to set warm reset status - * 34 - out - active low to enable PSE port - * 22 - in - active low when 802.3at powered - * 29 - in - active high when DC powered - * 40 - in - active low when reset due to cold HW reset - * 30 - in - active low when USB overcurrent detected - * 35 - in - interrupt line for power monitor chip - * 31 - in - active low when PSE port active - */ - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio12", "gpio59"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - i2c_0_pins: i2c_0_pinmux { - mux { - pins = "gpio20", "gpio21"; - function = "blsp_i2c0"; - drive-strength = <4>; - bias-disable; - }; - }; - - serial_0_pins: serial_0_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - serial_1_pins: serial_1_pinmux { - mux { - pins = "gpio8", "gpio9"; - function = "blsp_uart1"; - bias-disable; - }; - }; - - usb-power { - line-name = "USB-power"; - gpios = <23 GPIO_ACTIVE_HIGH>; - gpio-hog; - output-high; - }; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - /* - * There is no partition map for the NOR flash - * in the stock firmware. - * - * All partitions here are based on offsets - * found in the U-Boot GPL code and information - * from smem. - */ - - partition@0 { - label = "sbl1"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "mibib"; - reg = <0x40000 0x20000>; - read-only; - }; - - partition@60000 { - label = "qsee"; - reg = <0x60000 0x60000>; - read-only; - }; - - partition@c0000 { - label = "cdt"; - reg = <0xc0000 0x10000>; - read-only; - }; - - partition@d0000 { - label = "ddrparams"; - reg = <0xd0000 0x10000>; - read-only; - }; - - partition@e0000 { - label = "appsblenv"; - reg = <0xe0000 0x10000>; - read-only; - }; - - partition@f0000 { - label = "appsbl"; - reg = <0xf0000 0x100000>; - read-only; - }; - - partition@1e0000 { - label = "ART"; - reg = <0x1f0000 0x10000>; - read-only; - }; - - partition@1f0000 { - label = "osss"; - reg = <0x200000 0x170000>; - read-only; - }; - - partition@200000 { - label = "pds"; - reg = <0x370000 0x10000>; - read-only; - }; - - partition@380000 { - label = "apcd"; - reg = <0x380000 0x10000>; - read-only; - }; - - partition@390000 { - label = "mfginfo"; - reg = <0x390000 0x10000>; - read-only; - }; - - partition@3a0000 { - label = "fcache"; - reg = <0x3a0000 0x10000>; - read-only; - }; - - partition@3b0000 { - /* Called osss1 in smem */ - label = "u-boot-env-bak"; - reg = <0x3b0000 0x10000>; - read-only; - }; - - partition@3f0000 { - label = "u-boot-env"; - reg = <0x3c0000 0x40000>; - read-only; - }; - }; - }; - - flash@1 { - status = "okay"; - - compatible = "spi-nand"; - reg = <1>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - /* 'aos0' in Aruba firmware */ - label = "aos0"; - reg = <0x0 0x2000000>; - read-only; - }; - - partition@2000000 { - /* 'aos1' in Aruba firmware */ - label = "ubi"; - reg = <0x2000000 0x2000000>; - }; - - partition@4000000 { - label = "aruba-ubifs"; - reg = <0x4000000 0x4000000>; - read-only; - }; - }; - }; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "Aruba-AP-303"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "Aruba-AP-303"; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts deleted file mode 100644 index 07bb674520..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts +++ /dev/null @@ -1,193 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 OR MIT - -#include "qcom-ipq4029-aruba-glenmorangie.dtsi" -#include - -/ { - model = "Aruba AP-365"; - compatible = "aruba,ap-365"; - - aliases { - led-boot = &led_system_green; - led-failsafe = &led_system_red; - led-running = &led_system_green; - led-upgrade = &led_system_red; - }; - - leds { - compatible = "gpio-leds"; - - led_system_red: system_red { - label = "ap-365:red:system"; - gpios = <&tlmm 46 GPIO_ACTIVE_LOW>; - }; - - led_system_green: system_green { - label = "ap-365:green:system"; - gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; - }; - - system_amber { - label = "ap-365:amber:system"; - gpios = <&tlmm 49 GPIO_ACTIVE_LOW>; - }; - }; - - watchdog { - compatible = "linux,wdt-gpio"; - gpios = <&tlmm 41 GPIO_ACTIVE_LOW>; - hw_algo = "toggle"; - hw_margin_ms = <1000>; - always-running; - }; -}; - -&tlmm { - /* - * In addition to the Pins listed below, - * the following GPIOs have "features": - * 39 - out - pulse low to reset watchdog status flipflop - * 40 - out - active high to enable watchdog - * 41 - out - watchdog poke - * 42 - out - active low to reset BLE radio - * 43 - out - active low to reset TPM - * 47 - out - pulse low to reset warm reset status - * 54 - out - active low to force HW reset - * 18 - in - PHY interrupt line - * 45 - in - power monitor interrupt - * 48 - in - active low when cold reset - * 52 - in - active high when watchdog reset - */ - - phy-reset { - line-name = "PHY-reset"; - gpios = <42 GPIO_ACTIVE_HIGH>; - gpio-hog; - output-high; - }; -}; - -&i2c_0 { - power-monitor@40 { - /* No driver */ - compatible = "isl,isl28022"; - reg = <0x40>; - }; - - temperature-sensor@48 { - compatible = "adi,ad7416"; - reg = <0x48>; - }; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - /* - * There is no partition map for the NOR flash - * in the stock firmware. - * - * All partitions here are based on offsets - * found in the U-Boot GPL code and information - * from smem. - */ - - partition@0 { - label = "sbl1"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "mibib"; - reg = <0x40000 0x20000>; - read-only; - }; - - partition@60000 { - label = "qsee"; - reg = <0x60000 0x60000>; - read-only; - }; - - partition@c0000 { - label = "cdt"; - reg = <0xc0000 0x10000>; - read-only; - }; - - partition@d0000 { - label = "ddrparams"; - reg = <0xd0000 0x10000>; - read-only; - }; - - partition@e0000 { - label = "u-boot-env"; - reg = <0xe0000 0x10000>; - read-only; - }; - - partition@f0000 { - label = "appsbl"; - reg = <0xf0000 0x100000>; - read-only; - }; - - partition@1f0000 { - label = "ART"; - reg = <0x1f0000 0x10000>; - read-only; - }; - - partition@200000 { - label = "osss"; - reg = <0x200000 0x170000>; - read-only; - }; - - partition@370000 { - label = "pds"; - reg = <0x370000 0x10000>; - read-only; - }; - - partition@380000 { - label = "apcd"; - reg = <0x380000 0x10000>; - read-only; - }; - - partition@390000 { - label = "mfginfo"; - reg = <0x390000 0x10000>; - read-only; - }; - - partition@3a0000 { - label = "fcache"; - reg = <0x3a0000 0x10000>; - read-only; - }; - - partition@3b0000 { - label = "osss1"; - reg = <0x3b0000 0x50000>; - read-only; - }; - }; - }; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi deleted file mode 100644 index 4d1d82a272..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi +++ /dev/null @@ -1,249 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 OR MIT - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - - /delete-node/ ethernet-phy@0; - /delete-node/ ethernet-phy@2; - /delete-node/ ethernet-phy@3; - /delete-node/ ethernet-phy@4; - - ethernet-phy@5 { - reg = <0x5>; - }; - }; - - counter@4a1000 { - compatible = "qcom,qca-gcnt"; - reg = <0x4a1000 0x4>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */ - switch_lan_bmp = <0x0>; /* lan port bitmap */ - switch_wan_bmp = <0x10>; /* wan port bitmap */ - }; - - edma@c080000 { - qcom,single-phy; - qcom,num_gmac = <1>; - phy-mode = "rgmii-id"; - status = "okay"; - }; - - i2c_0: i2c@78b7000 { - pinctrl-0 = <&i2c_0_pins>; - pinctrl-names = "default"; - status = "okay"; - - tpm@29 { - /* No Driver */ - compatible = "atmel,at97sc3203"; - reg = <0x29>; - read-only; - }; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "Reset button"; - gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - /* Texas Instruments CC2540T BLE radio */ - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&blsp1_uart2 { - pinctrl-0 = <&serial_1_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac0 { - qcom,phy_mdio_addr = <5>; - qcom,poll_required = <1>; - vlan_tag = <0 0x20>; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - nand_pins: nand_pins { - pullups { - pins = "gpio53", "gpio58", "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; - - spi_0_pins: spi_0_pinmux { - pin { - function = "blsp_spi0"; - pins = "gpio13", "gpio14", "gpio15"; - drive-strength = <12>; - bias-disable; - }; - pin_cs { - function = "gpio"; - pins = "gpio12"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - i2c_0_pins: i2c_0_pinmux { - mux { - pins = "gpio10", "gpio11"; - function = "blsp_i2c0"; - drive-strength = <4>; - bias-disable; - }; - }; - - serial_0_pins: serial_0_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - serial_1_pins: serial_1_pinmux { - mux { - pins = "gpio8", "gpio9"; - function = "blsp_uart1"; - bias-disable; - }; - }; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - /* 'aos0' in Aruba firmware */ - label = "aos0"; - reg = <0x0 0x2000000>; - read-only; - }; - - partition@2000000 { - /* 'aos1' in Aruba firmware */ - label = "ubi"; - reg = <0x2000000 0x2000000>; - }; - - partition@4000000 { - label = "aruba-ubifs"; - reg = <0x4000000 0x4000000>; - read-only; - }; - }; - }; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "Aruba-AP-303"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "Aruba-AP-303"; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts deleted file mode 100644 index b32eb29f8c..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts +++ /dev/null @@ -1,280 +0,0 @@ -/* Copyright (c) 2015, The Linux Foundation. All rights reserved. - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "GL.iNet GL-B1300"; - compatible = "glinet,gl-b1300"; - - aliases { - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - }; - - ess-psgmii@98000 { - status = "okay"; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@194b000 { - /* select hostmode */ - compatible = "qcom,tcsr"; - reg = <0x194b000 0x100>; - qcom,usb-hsphy-mode-select = ; - status = "okay"; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - usb2@60f8800 { - status = "okay"; - }; - - usb3@8af8800 { - status = "okay"; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - status = "okay"; - switch_lan_bmp = <0x18>; - switch_wan_bmp = <0x20>; - }; - - edma@c080000 { - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - wps { - label = "wps"; - gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - reset { - label = "reset"; - gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - power: power { - label = "gl-b1300:green:power"; - gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - - mesh { - label = "gl-b1300:green:mesh"; - gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; - }; - - wlan { - label = "gl-b1300:green:wlan"; - gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&blsp1_spi1 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; - - mx25l25635f@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <24000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - SBL1@0 { - label = "SBL1"; - reg = <0x0 0x40000>; - read-only; - }; - - MIBIB@40000 { - label = "MIBIB"; - reg = <0x40000 0x20000>; - read-only; - }; - - QSEE@60000 { - label = "QSEE"; - reg = <0x60000 0x60000>; - read-only; - }; - - CDT@c0000 { - label = "CDT"; - reg = <0xc0000 0x10000>; - read-only; - }; - - DDRPARAMS@d0000 { - label = "DDRPARAMS"; - reg = <0xd0000 0x10000>; - read-only; - }; - - APPSBLENV@e0000 { - label = "APPSBLENV"; - reg = <0xe0000 0x10000>; - read-only; - }; - - APPSBL@f0000 { - label = "APPSBL"; - reg = <0xf0000 0x80000>; - read-only; - }; - - ART@170000 { - label = "ART"; - reg = <0x170000 0x10000>; - read-only; - }; - - firmware@180000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x180000 0x1e80000>; - }; - }; - }; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&tlmm { - serial_pins: serial_pinmux { - mux { - pins = "gpio60", "gpio61"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - spi_0_pins: spi_0_pinmux { - pinmux { - function = "blsp_spi0"; - pins = "gpio55", "gpio56", "gpio57"; - }; - pinmux_cs { - function = "gpio"; - pins = "gpio54"; - }; - pinconf { - pins = "gpio55", "gpio56", "gpio57"; - drive-strength = <12>; - bias-disable; - }; - pinconf_cs { - pins = "gpio54"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; -}; - -&usb2_hs_phy { - status = "okay"; -}; - -&usb3_hs_phy { - status = "okay"; -}; - -&usb3_ss_phy { - status = "okay"; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "GL-B1300"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "GL-B1300"; -}; diff --git a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-mr33.dts b/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-mr33.dts deleted file mode 100644 index 5003572420..0000000000 --- a/target/linux/ipq40xx/files-5.4/arch/arm/boot/dts/qcom-ipq4029-mr33.dts +++ /dev/null @@ -1,400 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Device Tree Source for Meraki MR33 (Stinkbug) - * - * Copyright (C) 2017 Chris Blake - * Copyright (C) 2017 Christian Lamparter - * - * Based on Cisco Meraki DTS from GPL release r25-linux-3.14-20170427 - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without - * any warranty of any kind, whether express or implied. - */ - -#include "qcom-ipq4019.dtsi" -#include -#include -#include - -/ { - model = "Meraki MR33 Access Point"; - compatible = "meraki,mr33"; - - aliases { - led-boot = &status_green; - led-failsafe = &status_red; - led-running = &status_green; - led-upgrade = &power_orange; - }; - - /* Do we really need this defined? */ - memory { - device_type = "memory"; - reg = <0x80000000 0x10000000>; - }; - - soc { - rng@22000 { - status = "okay"; - }; - - mdio@90000 { - status = "okay"; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - }; - - /* It is a 56-bit counter that supplies the count to the ARM arch - timers and without upstream driver */ - counter@4a1000 { - compatible = "qcom,qca-gcnt"; - reg = <0x4a1000 0x4>; - }; - - ess_tcsr@1953000 { - compatible = "qcom,tcsr"; - reg = <0x1953000 0x1000>; - qcom,ess-interface-select = ; - }; - - tcsr@1949000 { - compatible = "qcom,tcsr"; - reg = <0x1949000 0x100>; - qcom,wifi_glb_cfg = ; - }; - - tcsr@1957000 { - compatible = "qcom,tcsr"; - reg = <0x1957000 0x100>; - qcom,wifi_noc_memtype_m0_m2 = ; - }; - - serial@78b0000 { - pinctrl-0 = <&serial_1_pins>; - pinctrl-names = "default"; - status = "okay"; - - bluetooth { - compatible = "ti,cc2650"; - enable-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; - }; - }; - - crypto@8e3a000 { - status = "okay"; - }; - - watchdog@b017000 { - status = "okay"; - }; - - ess-switch@c000000 { - switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */ - switch_lan_bmp = <0x0>; /* lan port bitmap */ - switch_wan_bmp = <0x10>; /* wan port bitmap */ - }; - - edma@c080000 { - qcom,single-phy; - qcom,num_gmac = <1>; - phy-mode = "rgmii-rxid"; - status = "okay"; - }; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - power_orange: power { - label = "mr33:orange:power"; - gpios = <&tlmm 49 GPIO_ACTIVE_LOW>; - panic-indicator; - }; - }; -}; - -&blsp_dma { - status = "okay"; -}; - -&blsp1_uart1 { - pinctrl-0 = <&serial_0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&cryptobam { - status = "okay"; -}; - -&gmac0 { - qcom,phy_mdio_addr = <1>; - qcom,poll_required = <1>; - vlan_tag = <0 0x20>; -}; - -&blsp1_i2c3 { - pinctrl-0 = <&i2c_0_pins>; - pinctrl-names = "default"; - status = "okay"; - at24@50 { - compatible = "atmel,24c64"; - pagesize = <32>; - reg = <0x50>; - read-only; /* This holds our MAC & Meraki board-data */ - }; -}; - -&blsp1_i2c4 { - pinctrl-0 = <&i2c_1_pins>; - pinctrl-names = "default"; - status = "okay"; - - led-controller@30 { - compatible = "ti,lp5562"; - reg = <0x30>; - clock-mode = /bits/8 <2>; - enable-gpio = <&tlmm 48 GPIO_ACTIVE_HIGH>; - - /* RGB led */ - status_red: chan0 { - chan-name = "mr33:red:status"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - }; - - status_green: chan1 { - chan-name = "mr33:green:status"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - }; - - chan2 { - chan-name = "mr33:blue:status"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - }; - - chan3 { - chan-name = "mr33:white:status"; - led-cur = /bits/ 8 <0x20>; - max-cur = /bits/ 8 <0x60>; - }; - }; -}; - -&nand { - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - status = "okay"; - - nand@0 { - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "sbl1"; - reg = <0x00000000 0x00100000>; - read-only; - }; - partition@100000 { - label = "mibib"; - reg = <0x00100000 0x00100000>; - read-only; - }; - partition@200000 { - label = "bootconfig"; - reg = <0x00200000 0x00100000>; - read-only; - }; - partition@300000 { - label = "qsee"; - reg = <0x00300000 0x00100000>; - read-only; - }; - partition@400000 { - label = "qsee_alt"; - reg = <0x00400000 0x00100000>; - read-only; - }; - partition@500000 { - label = "cdt"; - reg = <0x00500000 0x00080000>; - read-only; - }; - partition@580000 { - label = "cdt_alt"; - reg = <0x00580000 0x00080000>; - read-only; - }; - partition@600000 { - label = "ddrparams"; - reg = <0x00600000 0x00080000>; - read-only; - }; - partition@700000 { - label = "u-boot"; - reg = <0x00700000 0x00200000>; - read-only; - }; - partition@900000 { - label = "u-boot-backup"; - reg = <0x00900000 0x00200000>; - read-only; - }; - partition@b00000 { - label = "ART"; - reg = <0x00b00000 0x00080000>; - read-only; - }; - partition@c00000 { - label = "ubi"; - reg = <0x00c00000 0x07000000>; - /* - * Do not try to allocate the remaining - * 4 MiB to this ubi partition. It will - * confuse the u-boot and it might not - * find the kernel partition anymore. - */ - }; - }; - }; -}; - -&pcie0 { - status = "okay"; - perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi2: wifi@1,0 { - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - }; - }; -}; - -&qpic_bam { - status = "okay"; -}; - -&tlmm { - /* - * GPIO43 should be 0/1 whenever the unit is - * powered through PoE or AC-Adapter. - * That said, playing with this seems to - * reset the AP. - */ - - mdio_pins: mdio_pinmux { - mux_1 { - pins = "gpio6"; - function = "mdio"; - bias-pull-up; - }; - mux_2 { - pins = "gpio7"; - function = "mdc"; - bias-pull-up; - }; - }; - - serial_0_pins: serial_pinmux { - mux { - pins = "gpio16", "gpio17"; - function = "blsp_uart0"; - bias-disable; - }; - }; - - serial_1_pins: serial1_pinmux { - mux { - /* We use the i2c-0 pins for serial_1 */ - pins = "gpio8", "gpio9"; - function = "blsp_uart1"; - bias-disable; - }; - }; - - i2c_0_pins: i2c_0_pinmux { - pinmux { - function = "blsp_i2c0"; - pins = "gpio20", "gpio21"; - }; - pinconf { - pins = "gpio20", "gpio21"; - drive-strength = <16>; - bias-disable; - }; - }; - - i2c_1_pins: i2c_1_pinmux { - pinmux { - function = "blsp_i2c1"; - pins = "gpio34", "gpio35"; - }; - pinconf { - pins = "gpio34", "gpio35"; - drive-strength = <16>; - bias-disable; - }; - }; - - nand_pins: nand_pins { - /* - * There are 18 pins. 15 pins are common between LCD and NAND. - * The QPIC controller arbitrates between LCD and NAND. Of the - * remaining 4, 2 are for NAND and 2 are for LCD exclusively. - * - * The meraki source hints that the bluetooth module claims - * pin 52 as well. But sadly, there's no data whenever this - * is a NAND or LCD exclusive pin or not. - */ - - pullups { - pins = "gpio52", "gpio53", "gpio58", - "gpio59"; - function = "qpic"; - bias-pull-up; - }; - - pulldowns { - pins = "gpio54", "gpio55", "gpio56", - "gpio57", "gpio60", "gpio61", - "gpio62", "gpio63", "gpio64", - "gpio65", "gpio66", "gpio67", - "gpio68", "gpio69"; - function = "qpic"; - bias-pull-down; - }; - }; -}; - -&wifi0 { - status = "okay"; - qcom,ath10k-calibration-variant = "Meraki-MR33"; -}; - -&wifi1 { - status = "okay"; - qcom,ath10k-calibration-variant = "Meraki-MR33"; -}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts new file mode 100644 index 0000000000..33c44a8097 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-a42.dts @@ -0,0 +1,219 @@ +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2017, Sven Eckelmann + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + model = "OpenMesh A42"; + compatible = "openmesh,a42"; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@194b000 { + /* select hostmode */ + compatible = "qcom,tcsr"; + reg = <0x194b000 0x100>; + qcom,usb-hsphy-mode-select = ; + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + usb2: usb2@60f8800 { + status = "okay"; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + }; + + edma@c080000 { + status = "okay"; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + }; + + leds { + compatible = "gpio-leds"; + + red { + label = "a42:red:status"; + gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + power: green { + label = "a42:green:status"; + gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; + }; + + blue { + label = "a42:blue:status"; + gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + }; + + watchdog { + compatible = "linux,wdt-gpio"; + gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; + hw_algo = "toggle"; + /* hw_margin_ms is actually 300s but driver limits it to 60s */ + hw_margin_ms = <60000>; + always-running; + }; +}; + +&tlmm { + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pin { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <12>; + bias-disable; + }; + pin_cs { + function = "gpio"; + pins = "gpio54"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_spi1 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + /* partitions are passed via bootloader */ + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&gmac0 { + qcom,phy_mdio_addr = <4>; + qcom,poll_required = <1>; + qcom,forced_speed = <1000>; + qcom,forced_duplex = <1>; + vlan_tag = <2 0x20>; +}; + +&gmac1 { + qcom,phy_mdio_addr = <3>; + qcom,poll_required = <1>; + qcom,forced_speed = <1000>; + qcom,forced_duplex = <1>; + vlan_tag = <1 0x10>; +}; + +&usb2_hs_phy { + status = "okay"; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "OM-A42"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "OM-A42"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts new file mode 100644 index 0000000000..e21c40cae0 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts @@ -0,0 +1,348 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + model = "ALFA Network AP120C-AC"; + compatible = "alfa-network,ap120c-ac"; + + aliases { + led-boot = &status; + led-failsafe = &status; + led-running = &status; + led-upgrade = &status; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + status: status { + label = "ap120c-ac:blue:status"; + gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + + wan { + label = "ap120c-ac:amber:wan"; + gpios = <&qca8075 19 GPIO_ACTIVE_HIGH>; + }; + + wlan2g { + label = "ap120c-ac:green:wlan2g"; + gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tpt"; + }; + + wlan5g { + label = "ap120c-ac:red:wlan5g"; + gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy1tpt"; + }; + }; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + counter@4a1000 { + compatible = "qcom,qca-gcnt"; + reg = <0x4a1000 0x4>; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + tcsr@194b000 { + compatible = "qcom,tcsr"; + reg = <0x194b000 0x100>; + qcom,usb-hsphy-mode-select = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + usb2@60f8800 { + status = "okay"; + }; + + usb3@8af8800 { + status = "okay"; + + dwc3@8a00000 { + phys = <&usb3_hs_phy>; + phy-names = "usb2-phy"; + }; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + qca8075: ess-switch@c000000 { + status = "okay"; + + switch_lan_bmp = <0x10>; + switch_wan_bmp = <0x20>; + + #gpio-cells = <2>; + gpio-controller; + }; + + edma@c080000 { + status = "okay"; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_i2c3 { + status = "okay"; + + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + tpm@29 { + compatible = "atmel,at97sc3204t"; + reg = <0x29>; + }; +}; + +&blsp1_spi1 { + status = "okay"; + + pinctrl-0 = <&spi0_pins>; + pinctrl-names = "default"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, + <&tlmm 4 GPIO_ACTIVE_HIGH>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SBL1"; + reg = <0x00000000 0x00040000>; + read-only; + }; + + partition@40000 { + label = "MIBIB"; + reg = <0x00040000 0x00020000>; + read-only; + }; + + partition@60000 { + label = "QSEE"; + reg = <0x00060000 0x00060000>; + read-only; + }; + + partition@c0000 { + label = "CDT"; + reg = <0x000c0000 0x00010000>; + read-only; + }; + + partition@d0000 { + label = "DDRPARAMS"; + reg = <0x000d0000 0x00010000>; + read-only; + }; + + partition@e0000 { + label = "APPSBLENV"; + reg = <0x000e0000 0x00010000>; + }; + + partition@f0000 { + label = "APPSBL"; + reg = <0x000f0000 0x00080000>; + read-only; + }; + + partition@170000 { + label = "ART"; + reg = <0x00170000 0x00010000>; + read-only; + }; + + partition@180000 { + label = "priv_data1"; + reg = <0x00180000 0x00010000>; + read-only; + }; + + partition@190000 { + label = "priv_data2"; + reg = <0x00190000 0x00010000>; + read-only; + }; + }; + }; + + nand@1 { + compatible = "spi-nand"; + reg = <1>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "rootfs1"; + reg = <0x00000000 0x04000000>; + }; + + partition@4000000 { + label = "rootfs2"; + reg = <0x04000000 0x04000000>; + }; + }; + }; +}; + +&blsp1_uart1 { + status = "okay"; + + pinctrl-0 = <&serial0_pins>; + pinctrl-names = "default"; +}; + +&cryptobam { + status = "okay"; +}; + +&gmac0 { + qcom,forced_duplex = <1>; + qcom,forced_speed = <1000>; + qcom,phy_mdio_addr = <3>; + qcom,poll_required = <1>; + vlan_tag = <1 0x10>; +}; + +&gmac1 { + qcom,forced_duplex = <1>; + qcom,forced_speed = <1000>; + qcom,phy_mdio_addr = <4>; + qcom,poll_required = <1>; + vlan_tag = <2 0x20>; +}; + +&tlmm { + i2c0_pins: i2c0_pinmux { + mux_i2c { + function = "blsp_i2c0"; + pins = "gpio58", "gpio59"; + drive-strength = <16>; + bias-disable; + }; + }; + + mdio_pins: mdio_pinmux { + mux_mdio { + pins = "gpio53"; + function = "mdio"; + bias-pull-up; + }; + + mux_mdc { + pins = "gpio52"; + function = "mdc"; + bias-pull-up; + }; + }; + + serial0_pins: serial0_pinmux { + mux_uart { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi0_pins: spi0_pinmux { + mux_spi { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <12>; + bias-disable; + }; + + mux_cs { + function = "gpio"; + pins = "gpio54", "gpio4"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; +}; + +&usb2_hs_phy { + status = "okay"; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&wifi0 { + status = "okay"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "ALFA-Network-AP120C-AC"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts new file mode 100644 index 0000000000..d8b9e7ef13 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts @@ -0,0 +1,242 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + model = "EZVIZ CS-W3-WD1200G EUP"; + compatible = "ezviz,cs-w3-wd1200g-eup"; + + aliases { + led-boot = &led_status_green; + led-failsafe = &led_status_red; + led-running = &led_status_blue; + led-upgrade = &led_status_green; + }; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; + reset-delay-us = <5000>; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + tcsr@194b000 { + compatible = "qcom,tcsr"; + reg = <0x194b000 0x100>; + qcom,usb-hsphy-mode-select = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + }; + + edma@c080000 { + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_status_red: status_red { + label = "cs-w3-wd1200g-eup:red:status"; + gpios = <&tlmm 0 GPIO_ACTIVE_LOW>; + }; + + led_status_green: status_green { + label = "cs-w3-wd1200g-eup:green:status"; + gpios = <&tlmm 3 GPIO_ACTIVE_LOW>; + }; + + led_status_blue: status_blue { + label = "cs-w3-wd1200g-eup:blue:status"; + gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&tlmm { + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + mdio_pins: mdio_pinmux { + mux_1 { + pins = "gpio53"; + function = "mdio"; + bias-pull-up; + }; + + mux_2 { + pins = "gpio52"; + function = "mdc"; + bias-pull-up; + }; + }; + + spi_0_pins: spi_0_pinmux { + pin { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <12>; + bias-disable; + }; + pin_cs { + function = "gpio"; + pins = "gpio54"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_spi1 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition0@0 { + label = "SBL1"; + reg = <0x00000000 0x00040000>; + read-only; + }; + + partition1@40000 { + label = "MIBIB"; + reg = <0x00040000 0x00020000>; + read-only; + }; + + partition2@60000 { + label = "QSEE"; + reg = <0x00060000 0x00060000>; + read-only; + }; + + partition3@c0000 { + label = "CDT"; + reg = <0x000c0000 0x00010000>; + read-only; + }; + + partition4@d0000 { + label = "DDRPARAMS"; + reg = <0x000d0000 0x00010000>; + read-only; + }; + + partition5@E0000 { + label = "APPSBLENV"; + reg = <0x000e0000 0x00010000>; + read-only; + }; + + partition6@F0000 { + label = "APPSBL"; + reg = <0x000f0000 0x00080000>; + read-only; + }; + + partition7@170000 { + label = "ART"; + reg = <0x00170000 0x00010000>; + read-only; + }; + + partition9@580000 { + compatible = "denx,fit"; + label = "firmware"; + reg = <0x00180000 0x00e80000>; + }; + }; + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "ezviz-cs-w3-wd1200g-eup"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "ezviz-cs-w3-wd1200g-eup"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts new file mode 100644 index 0000000000..17d9215544 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-dap-2610.dts @@ -0,0 +1,241 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + model = "D-Link DAP 2610"; + compatible = "dlink,dap-2610"; + + aliases { + led-boot = &led_red; + led-failsafe = &led_red; + led-running = &led_green; + led-upgrade = &led_red; + }; + + soc { + edma@c080000 { + qcom,num_gmac = <1>; + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + rng@22000 { + status = "okay"; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + switch_lan_bmp = <0x20>; + switch_wan_bmp = <0x00>; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_red: red { + label = "dap-2610:red:power"; + gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; + }; + + led_green: green { + label = "dap-2610:green:power"; + gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&blsp1_spi1 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + + partitions { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fixed-partitions"; + + partition@0 { + label = "SBL1"; + reg = <0x0 0x40000>; + read-only; + }; + partition@40000 { + label = "MIBIB"; + reg = <0x40000 0x20000>; + read-only; + }; + partition@60000 { + label = "QSEE"; + reg = <0x60000 0x60000>; + read-only; + }; + partition@c0000 { + label = "CDT"; + reg = <0xc0000 0x10000>; + read-only; + }; + partition@d0000 { + label = "DDRPARAMS"; + reg = <0xd0000 0x10000>; + read-only; + }; + partition@e0000 { + label = "APPSBLENV"; + reg = <0xe0000 0x10000>; + read-only; + }; + partition@f0000 { + label = "APPSBL"; + reg = <0xf0000 0x80000>; + read-only; + }; + partition@170000 { + label = "ART"; + reg = <0x170000 0x10000>; + read-only; + }; + partition@180000 { + compatible = "wrg"; + label = "firmware"; + reg = <0x180000 0xdc0000>; + }; + partition@fb0000 { + label = "rgbd"; + reg = <0xfb0000 0x10000>; + read-only; + }; + partition@fc0000 { + label = "bdcfg"; + reg = <0xfc0000 0x10000>; + read-only; + }; + partition@fd0000 { + label = "langpack"; + reg = <0xfd0000 0x20000>; + read-only; + }; + partition@ff0000 { + label = "certificate"; + reg = <0xff0000 0x10000>; + read-only; + }; + partition@f40000 { + label = "captival"; + reg = <0xf40000 0x70000>; + read-only; + }; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&gmac0 { + qcom,phy_mdio_addr = <4>; + qcom,poll_required = <1>; + qcom,forced_speed = <1000>; + qcom,forced_duplex = <1>; + vlan_tag = <1 0x20>; +}; + +&mdio { + status = "okay"; +}; + +&tlmm { + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + mux { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <12>; + bias-disable; + }; + mux_cs { + function = "gpio"; + pins = "gpio54"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "dlink,dap-2610"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "dlink,dap-2610"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts new file mode 100644 index 0000000000..2f9a890485 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ea6350v3.dts @@ -0,0 +1,277 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + model = "Linksys EA6350v3"; + compatible = "linksys,ea6350v3"; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + }; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + tcsr@194b000 { + compatible = "qcom,tcsr"; + reg = <0x194b000 0x100>; + qcom,usb-hsphy-mode-select = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + usb2@60f8800 { + status = "okay"; + }; + + usb3@8af8800 { + status = "okay"; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + }; + + edma@c080000 { + status = "okay"; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&tlmm 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + power: status { + label = "EA6350v3:green:status"; + gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "linksys-ea6350v3"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "linksys-ea6350v3"; +}; + + +&blsp_dma { + status = "okay"; +}; + +&tlmm { + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + mux { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <12>; + bias-disable; + }; + + mux_cs { + function = "gpio"; + pins = "gpio54", "gpio59"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; +}; + +&blsp1_spi1 { /* BLSP1 QUP1 */ + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, + <&tlmm 59 GPIO_ACTIVE_HIGH>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + SBL1@0 { + label = "SBL1"; + reg = <0x00000000 0x00040000>; + read-only; + }; + MBIB@40000 { + label = "MIBIB"; + reg = <0x00040000 0x00020000>; + read-only; + }; + QSEE@60000 { + label = "QSEE"; + reg = <0x00060000 0x00060000>; + read-only; + }; + CDT@c0000 { + label = "CDT"; + reg = <0x000c0000 0x00010000>; + read-only; + }; + APPSBLENV@d0000 { + label = "APPSBLENV"; + reg = <0x000d0000 0x00010000>; + read-only; + }; + APPSBL@e0000 { + label = "APPSBL"; /* uboot */ + reg = <0x000e0000 0x00080000>; + read-only; + }; + ART@160000 { + label = "ART"; + reg = <0x00160000 0x00010000>; + read-only; + }; + u_env@170000 { + label = "u_env"; + reg = <0x00170000 0x00020000>; + }; + s_env@190000 { + label = "s_env"; + reg = <0x00190000 0x00020000>; + }; + devinfo@1b0000 { + label = "devinfo"; + reg = <0x001b0000 0x00010000>; + }; + /* 0x001c0000 - 0x00200000 unused */ + }; + }; + + flash@1 { + status = "okay"; + compatible = "spi-nand"; + reg = <1>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + kernel@0 { + label = "kernel"; + reg = <0x00000000 0x02800000>; + }; + rootfs@300000 { + label = "rootfs"; + reg = <0x00300000 0x02500000>; + }; + alt_kernel@2800000 { + label = "alt_kernel"; + reg = <0x02800000 0x02800000>; + }; + alt_rootfs@2b00000 { + label = "alt_rootfs"; + reg = <0x02b00000 0x02500000>; + }; + sysdiag@5000000 { + label = "sysdiag"; + reg = <0x05000000 0x00100000>; + }; + syscfg@5100000 { + label = "syscfg"; + reg = <0x05100000 0x02F00000>; + }; + /* 0x00000000 - 0x08000000: 128 MiB */ + }; + }; +}; + +&usb3_ss_phy { + status = "okay"; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&usb2_hs_phy { + status = "okay"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts new file mode 100644 index 0000000000..32fded4c0e --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-eap1300.dts @@ -0,0 +1,235 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + model = "EnGenius EAP1300"; + compatible = "engenius,eap1300"; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + }; + + edma@c080000 { + status = "okay"; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>; + linux,code = ; + }; + }; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + }; + + leds { + compatible = "gpio-leds"; + + power: orange { + label = "eap1300:orange:power"; + gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; + }; + + lan { + label = "eap1300:blue:lan"; + gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; + }; + + mesh { + label = "eap1300:blue:mesh"; + gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; + }; + + wlan2g { + label = "eap1300:blue:wlan2g"; + gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; + }; + + wlan5g { + label = "eap1300:yellow:wlan5g"; + gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&tlmm { + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pin { + function = "blsp_spi0"; + pins = "gpio54", "gpio55", "gpio56", "gpio57"; + drive-strength = <12>; + bias-disable; + }; + pin_cs { + function = "gpio"; + pins = "gpio54"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_spi1 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "0:SBL1"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition1@40000 { + label = "0:MIBIB"; + reg = <0x00040000 0x00020000>; + read-only; + }; + partition2@60000 { + label = "0:QSEE"; + reg = <0x00060000 0x00060000>; + read-only; + }; + partition3@c0000 { + label = "0:CDT"; + reg = <0x000c0000 0x00010000>; + read-only; + }; + partition4@d0000 { + label = "0:DDRPARAMS"; + reg = <0x000d0000 0x00010000>; + read-only; + }; + partition5@e0000 { + label = "0:APPSBLENV"; + reg = <0x000e0000 0x00010000>; + read-only; + }; + partition6@f0000 { + label = "0:APPSBL"; + reg = <0x000f0000 0x00090000>; + read-only; + }; + partition7@180000 { + label = "0:ART"; + reg = <0x00180000 0x00010000>; + read-only; + }; + partition8@190000 { + compatible = "denx,fit"; + label = "firmware"; + reg = <0x190000 0x1dc0000>; + }; + partition9@1f50000 { + label = "u-boot-env"; + reg = <0x01f50000 0x00010000>; + }; + partition10@1f60000 { + label = "userconfig"; + reg = <0x01f60000 0x000a0000>; + }; + }; + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&gmac0 { + vlan_tag = <2 0x20>; +}; + +&gmac1 { + vlan_tag = <1 0x10>; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "EnGenius-EAP1300"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "EnGenius-EAP1300"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emd1.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emd1.dts new file mode 100644 index 0000000000..cf4f793f21 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emd1.dts @@ -0,0 +1,233 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + model = "EnGenius EMD1"; + compatible = "engenius,emd1"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + switch_lan_bmp = <0x20>; + switch_wan_bmp = <0x00>; + }; + + edma@c080000 { + status = "okay"; + qcom,num_gmac = <1>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "emd1:white:power"; + gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; + }; + + wlan2g { + label = "emd1:red:wlan2g"; + gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tpt"; + }; + + wlan5g { + label = "emd1:blue:wlan5g"; + gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy1tpt"; + }; + + mesh { + label = "emd1:orange:mesh"; + gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&tlmm { + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pin { + function = "blsp_spi0"; + pins = "gpio54", "gpio55", "gpio56", "gpio57"; + drive-strength = <12>; + bias-disable; + }; + + pin_cs { + function = "gpio"; + pins = "gpio54"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_spi1 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition0@0 { + label = "0:SBL1"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition1@40000 { + label = "0:MIBIB"; + reg = <0x00040000 0x00020000>; + read-only; + }; + partition2@60000 { + label = "0:QSEE"; + reg = <0x00060000 0x00060000>; + read-only; + }; + partition3@c0000 { + label = "0:CDT"; + reg = <0x000c0000 0x00010000>; + read-only; + }; + partition4@d0000 { + label = "0:DDRPARAMS"; + reg = <0x000d0000 0x00010000>; + read-only; + }; + partition5@e0000 { + label = "0:APPSBLENV"; + reg = <0x000e0000 0x00010000>; + read-only; + }; + partition6@f0000 { + label = "0:APPSBL"; + reg = <0x000f0000 0x00080000>; + read-only; + }; + partition7@170000 { + label = "0:ART"; + reg = <0x00170000 0x00010000>; + read-only; + }; + partition8@180000 { + label = "userconfig"; + reg = <0x00180000 0x00080000>; + read-only; + }; + partition9@200000 { + compatible = "denx,fit"; + label = "firmware"; + reg = <0x200000 0x01e00000>; + }; + }; + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&gmac0 { + qcom,phy_mdio_addr = <4>; + qcom,poll_required = <1>; + qcom,forced_speed = <1000>; + qcom,forced_duplex = <1>; + vlan_tag = <1 0x20>; +}; + +&cryptobam { + status = "okay"; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "EnGenius-EMD1"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "EnGenius-EMD1"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts new file mode 100644 index 0000000000..50067aaa91 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-emr3500.dts @@ -0,0 +1,235 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + model = "EnGenius EMR3500"; + compatible = "engenius,emr3500"; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + usb2_hs_phy: hsphy@a8000 { + status = "okay"; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + }; + + edma@c080000 { + status = "okay"; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + }; + + leds { + compatible = "gpio-leds"; + + power: white { + label = "emr3500:white:power"; + gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; + }; + + blue { + label = "emr3500:blue"; + gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; + }; + + red { + label = "emr3500:red"; + gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; + }; + + orange { + label = "emr3500:orange"; + gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&tlmm { + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pin { + function = "blsp_spi0"; + pins = "gpio54", "gpio55", "gpio56", "gpio57"; + drive-strength = <12>; + bias-disable; + }; + pin_cs { + function = "gpio"; + pins = "gpio54"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_spi1 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "0:SBL1"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "0:MIBIB"; + reg = <0x00040000 0x00020000>; + read-only; + }; + partition@60000 { + label = "0:QSEE"; + reg = <0x00060000 0x00060000>; + read-only; + }; + partition@c0000 { + label = "0:CDT"; + reg = <0x000c0000 0x00010000>; + read-only; + }; + partition@d0000 { + label = "0:DDRPARAMS"; + reg = <0x000d0000 0x00010000>; + read-only; + }; + partition@e0000 { + label = "0:APPSBLENV"; + reg = <0x000e0000 0x00010000>; + read-only; + }; + partition@f0000 { + label = "0:APPSBL"; + reg = <0x000f0000 0x00080000>; + read-only; + }; + partition@170000 { + label = "0:ART"; + reg = <0x00170000 0x00010000>; + read-only; + }; + partition@180000 { + label = "userconfig"; + reg = <0x00180000 0x00080000>; + read-only; + }; + partition@200000 { + compatible = "denx,fit"; + label = "firmware"; + reg = <0x200000 0x1e00000>; + }; + }; + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&gmac0 { + vlan_tag = <1 0x10>; +}; + +&gmac1 { + vlan_tag = <2 0x20>; +}; + +&usb2_hs_phy { + status = "okay"; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "EnGenius-EMR3500"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "EnGenius-EMR3500"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts new file mode 100644 index 0000000000..8636b18b2e --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ens620ext.dts @@ -0,0 +1,265 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + model = "EnGenius ENS620EXT"; + compatible = "engenius,ens620ext"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; + }; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + }; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + }; + + edma@c080000 { + status = "okay"; + }; + + /* + * Disable the broken restart as a workaround for the buggy + * 3.0.0/3.0.1 U-boots that ship with the device. + * Note: The watchdog is now used to restart this device. + */ + restart@4ab000 { + status = "disabled"; + }; + }; + + buttons { + compatible = "gpio-keys"; + + wps { + label = "wps"; + gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + power: power { + label = "ens620ext:amber:power"; + gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; + }; + + lan1 { + label = "ens620ext:green:lan1"; + gpios = <&tlmm 1 GPIO_ACTIVE_LOW>; + }; + + lan2 { + label = "ens620ext:green:lan2"; + gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + }; + + wlan2G { + label = "ens620ext:green:wlan2G"; + gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; + }; + + wlan5G { + label = "ens620ext:green:wlan5G"; + gpios = <&tlmm 0 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&cryptobam { + status = "okay"; +}; + +&blsp_dma { + status = "okay"; +}; + +&tlmm { + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + mux { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <12>; + bias-disable; + }; + + mux_cs { + function = "gpio"; + pins = "gpio54"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; +}; + +&blsp1_spi1 { /* BLSP1 QUP1 */ + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; + + flash@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SBL1"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "MIBIB"; + reg = <0x00040000 0x00020000>; + read-only; + }; + partition@60000 { + label = "QSEE"; + reg = <0x00060000 0x00060000>; + read-only; + }; + partition@c0000 { + label = "CDT"; + reg = <0x000c0000 0x00010000>; + read-only; + }; + partition@d0000 { + label = "DDRPARAMS"; + reg = <0x000d0000 0x00010000>; + read-only; + }; + partition@e0000 { + label = "APPSBLENV"; /* uboot env*/ + reg = <0x000e0000 0x00010000>; + read-only; + }; + partition@f0000 { + label = "APPSBL"; /* uboot */ + reg = <0x000f0000 0x00090000>; + read-only; + }; + partition@180000 { + label = "ART"; + reg = <0x00180000 0x00010000>; + read-only; + }; + partition@190000 { + compatible = "denx,fit"; + label = "firmware"; + reg = <0x00190000 0x14d0000>; + }; + partition@1660000 { + label = "failsafe"; + reg = <0x01660000 0x008F0000>; + read-only; + }; + partition@1f50000 { + label = "u-boot-env"; + reg = <0x01f50000 0x00010000>; + read-only; + }; + partition@1f60000 { + label = "userconfig"; + reg = <0x01f60000 0x000a0000>; + read-only; + }; + }; + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usb3_ss_phy { + status = "okay"; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&usb2_hs_phy { + status = "okay"; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "EnGenius-ENS620EXT"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "EnGenius-ENS620EXT"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex6100v2.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex6100v2.dts new file mode 100644 index 0000000000..2b93dcbb99 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex6100v2.dts @@ -0,0 +1,33 @@ +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2018, David Bauer + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include "qcom-ipq4018-ex61x0v2.dtsi" +#include +#include + +/ { + model = "Netgear EX6100v2"; + compatible = "netgear,ex6100v2"; +}; + +&wifi0 { + qcom,ath10k-calibration-variant = "Netgear-EX6100v2"; +}; + +&wifi1 { + qcom,ath10k-calibration-variant = "Netgear-EX6100v2"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts new file mode 100644 index 0000000000..f1c44c1ae8 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex6150v2.dts @@ -0,0 +1,33 @@ +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2018, David Bauer + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include "qcom-ipq4018-ex61x0v2.dtsi" +#include +#include + +/ { + model = "Netgear EX6150v2"; + compatible = "netgear,ex6150v2"; +}; + +&wifi0 { + qcom,ath10k-calibration-variant = "Netgear-EX6150v2"; +}; + +&wifi1 { + qcom,ath10k-calibration-variant = "Netgear-EX6150v2"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi new file mode 100644 index 0000000000..cc70080c92 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi @@ -0,0 +1,312 @@ +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2018, David Bauer + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + model = "Netgear EX61X0v2"; + compatible = "netgear,ex61x0v2"; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + }; + + edma@c080000 { + status = "okay"; + qcom,num_gmac = <1>; + }; + }; + + aliases { + led-boot = &power_amber; + led-failsafe = &power_amber; + led-running = &power_green; + led-upgrade = &power_amber; + label-mac-device = &gmac0; + }; + + keys { + compatible = "gpio-keys"; + + wps { + label = "wps"; + gpios = <&tlmm 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + reset { + label = "reset"; + gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + led_spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sck-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; + num-chipselects = <0>; + + led_gpio: led_gpio@0 { + compatible = "fairchild,74hc595"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + registers-number = <1>; + spi-max-frequency = <1000000>; + }; + }; + + leds { + compatible = "gpio-leds"; + + power_amber: power_amber { + label = "ex61x0v2:amber:power"; + gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>; + }; + + power_green: power_green { + label = "ex61x0v2:green:power"; + gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>; + }; + + right { + label = "ex61x0v2:blue:right"; + gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>; + }; + + left { + label = "ex61x0v2:blue:left"; + gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>; + }; + + client_green { + label = "ex61x0v2:green:client"; + gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>; + }; + + client_red { + label = "ex61x0v2:red:client"; + gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>; + }; + + router_green { + label = "ex61x0v2:green:router"; + gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>; + }; + + router_red { + label = "ex61x0v2:red:router"; + gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "ex61x0v2:green:wps"; + gpios = <&tlmm 1 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&tlmm { + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pin { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <12>; + bias-disable; + }; + pin_cs { + function = "gpio"; + pins = "gpio54"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; +}; + +&blsp1_spi1 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; + + mx25l12805d@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition0@0 { + label = "SBL1"; + reg = <0x00000000 0x00040000>; + read-only; + }; + + partition1@40000 { + label = "MIBIB"; + reg = <0x00040000 0x00020000>; + read-only; + }; + + partition2@60000 { + label = "QSEE"; + reg = <0x00060000 0x00060000>; + read-only; + }; + + partition3@c0000 { + label = "CDT"; + reg = <0x000c0000 0x00010000>; + read-only; + }; + + partition4@d0000 { + label = "DDRPARAMS"; + reg = <0x000d0000 0x00010000>; + read-only; + }; + + partition5@E0000 { + label = "APPSBLENV"; + reg = <0x000e0000 0x00010000>; + read-only; + }; + + partition6@F0000 { + label = "APPSBL"; + reg = <0x000f0000 0x00080000>; + read-only; + }; + + partition7@170000 { + label = "ART"; + reg = <0x00170000 0x00010000>; + read-only; + }; + + partition8@180000 { + label = "config"; + reg = <0x00180000 0x00010000>; + read-only; + }; + + partition9@190000 { + label = "pot"; + reg = <0x00190000 0x00010000>; + read-only; + }; + + partition10@1a0000 { + label = "dnidata"; + reg = <0x001a0000 0x00010000>; + read-only; + }; + + partition11@1b0000 { + compatible = "denx,fit"; + label = "firmware"; + reg = <0x001b0000 0x00e10000>; + }; + + partition12@fc0000 { + label = "language"; + reg = <0x00fc0000 0x00040000>; + read-only; + }; + }; + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&blsp_dma { + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&wifi0 { + status = "okay"; +}; + +&wifi1 { + status = "okay"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts new file mode 100644 index 0000000000..b2a32946d9 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-fritzbox-4040.dts @@ -0,0 +1,292 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + model = "AVM FRITZ!Box 4040"; + compatible = "avm,fritzbox-4040"; + + aliases { + led-boot = &power; + led-failsafe = &flash; + led-running = &power; + led-upgrade = &flash; + label-mac-device = &gmac0; + }; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + tcsr@194b000 { + compatible = "qcom,tcsr"; + reg = <0x194b000 0x100>; + qcom,usb-hsphy-mode-select = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + usb2@60f8800 { + status = "okay"; + }; + + usb3@8af8800 { + status = "okay"; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + qca8075: ess-switch@c000000 { + status = "okay"; + + #gpio-cells = <2>; + gpio-controller; + + enable-usb-power { + gpio-hog; + line-name = "enable USB3 power"; + gpios = <7 GPIO_ACTIVE_HIGH>; + output-high; + }; + }; + + edma@c080000 { + status = "okay"; + }; + }; + + keys { + compatible = "gpio-keys"; + + wlan { + label = "wlan"; + gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + switch-leds { + compatible = "gpio-leds"; + + wlan { + label = "fritz4040:green:wlan"; + gpios = <&qca8075 1 GPIO_ACTIVE_HIGH>; + }; + + panic: info_red { + label = "fritz4040:red:info"; + gpios = <&qca8075 3 GPIO_ACTIVE_HIGH>; + panic-indicator; + }; + + wan { + label = "fritz4040:green:wan"; + gpios = <&qca8075 5 GPIO_ACTIVE_HIGH>; + }; + + power: power { + label = "fritz4040:green:power"; + gpios = <&qca8075 11 GPIO_ACTIVE_HIGH>; + }; + + lan { + label = "fritz4040:green:lan"; + gpios = <&qca8075 13 GPIO_ACTIVE_HIGH>; + }; + + flash: info_amber { + label = "fritz4040:amber:info"; + gpios = <&qca8075 15 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&tlmm { + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + mux { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <12>; + bias-disable; + }; + + mux_cs { + function = "gpio"; + pins = "gpio54"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; +}; + +&cryptobam { + status = "okay"; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_spi1 { /* BLSP1 QUP1 */ + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + status = "okay"; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition0@0 { + label = "SBL1"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition1@40000 { + label = "MIBIB"; + reg = <0x00040000 0x00020000>; + read-only; + }; + partition2@60000 { + label = "QSEE"; + reg = <0x00060000 0x00060000>; + read-only; + }; + partition3@c0000 { + label = "CDT"; + reg = <0x000c0000 0x00010000>; + read-only; + }; + partition4@d0000 { + label = "DDRPARAMS"; + reg = <0x000d0000 0x00010000>; + read-only; + }; + partition5@e0000 { + label = "APPSBLENV"; /* uboot env - empty */ + reg = <0x000e0000 0x00010000>; + read-only; + }; + partition6@f0000 { + label = "urlader"; /* APPSBL */ + reg = <0x000f0000 0x0002dc000>; + read-only; + }; + partition7@11dc00 { + /* make a backup of this partition! */ + label = "urlader_config"; + reg = <0x0011dc00 0x00002400>; + read-only; + }; + partition8@120000 { + label = "tffs1"; + reg = <0x00120000 0x00080000>; + read-only; + }; + partition9@1a0000 { + label = "tffs2"; + reg = <0x001a0000 0x00080000>; + read-only; + }; + partition10@220000 { + label = "uboot"; + reg = <0x00220000 0x00080000>; + read-only; + }; + partition11@2A0000 { + compatible = "denx,fit"; + label = "firmware"; + reg = <0x002a0000 0x01c60000>; + }; + partition12@1f00000 { + label = "jffs2"; + reg = <0x01f00000 0x00100000>; + }; + }; + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usb3_ss_phy { + status = "okay"; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&usb2_hs_phy { + status = "okay"; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "AVM-FRITZBox-4040"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts new file mode 100644 index 0000000000..988b86b68d --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts @@ -0,0 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +// Copyright (c) 2018, Robert Marko + +#include "qcom-ipq4018-jalapeno.dtsi" + +/ { + model = "8devices Jalapeno"; + compatible = "8dev,jalapeno"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi new file mode 100644 index 0000000000..3af6de1f60 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dtsi @@ -0,0 +1,269 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +// Copyright (c) 2018, Robert Marko + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + counter@4a1000 { + compatible = "qcom,qca-gcnt"; + reg = <0x4a1000 0x4>; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + tcsr@194b000 { + status = "okay"; + + compatible = "qcom,tcsr"; + reg = <0x194b000 0x100>; + qcom,usb-hsphy-mode-select = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + usb2: usb2@60f8800 { + status = "okay"; + }; + + usb3: usb3@8af8800 { + status = "okay"; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + + switch_lan_bmp = <0x10>; /* lan port bitmap */ + }; + + edma@c080000 { + status = "okay"; + }; + }; +}; + +&tlmm { + mdio_pins: mdio_pinmux { + pinmux_1 { + pins = "gpio53"; + function = "mdio"; + }; + + pinmux_2 { + pins = "gpio52"; + function = "mdc"; + }; + + pinconf { + pins = "gpio52", "gpio53"; + bias-pull-up; + }; + }; + + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pin { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <2>; + bias-disable; + }; + + pin_cs { + function = "gpio"; + pins = "gpio54", "gpio59"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_spi1 { + status = "okay"; + + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>; + + flash@0 { + status = "okay"; + + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SBL1"; + reg = <0x00000000 0x00040000>; + read-only; + }; + + partition@40000 { + label = "MIBIB"; + reg = <0x00040000 0x00020000>; + read-only; + }; + + partition@60000 { + label = "QSEE"; + reg = <0x00060000 0x00060000>; + read-only; + }; + + partition@c0000 { + label = "CDT"; + reg = <0x000c0000 0x00010000>; + read-only; + }; + + partition@d0000 { + label = "DDRPARAMS"; + reg = <0x000d0000 0x00010000>; + read-only; + }; + + partition@e0000 { + label = "APPSBLENV"; /* uboot env*/ + reg = <0x000e0000 0x00010000>; + read-only; + }; + + partition@f0000 { + label = "APPSBL"; /* uboot */ + reg = <0x000f0000 0x00080000>; + read-only; + }; + + partition@170000 { + label = "ART"; + reg = <0x00170000 0x00010000>; + read-only; + }; + }; + }; + + spi-nand@1 { + status = "okay"; + + compatible = "spi-nand"; + reg = <1>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ubi"; + reg = <0x00000000 0x08000000>; + }; + }; + }; +}; + +&blsp1_uart1 { + status = "okay"; + + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; +}; + +&cryptobam { + status = "okay"; +}; + +&gmac0 { + qcom,poll_required = <1>; + qcom,poll_required_dynamic = <1>; + qcom,phy_mdio_addr = <3>; + vlan_tag = <1 0x10>; +}; + +&gmac1 { + qcom,poll_required = <1>; + qcom,poll_required_dynamic = <1>; + qcom,phy_mdio_addr = <4>; + vlan_tag = <2 0x20>; +}; + +&wifi0 { + status = "okay"; + + qcom,ath10k-calibration-variant = "8devices-Jalapeno"; +}; + +&wifi1 { + status = "okay"; + + qcom,ath10k-calibration-variant = "8devices-Jalapeno"; +}; + +&usb3_ss_phy { + status = "okay"; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&usb2_hs_phy { + status = "okay"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-meshpoint-one.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-meshpoint-one.dts new file mode 100644 index 0000000000..2e21b55325 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-meshpoint-one.dts @@ -0,0 +1,81 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* Copyright (c) 2019, CRISIS INNOVATION LAB d.o.o. + * Author: Robert Marko + */ + +#include "qcom-ipq4018-jalapeno.dtsi" + +/ { + model = "Crisis Innovation Lab MeshPoint.One"; + compatible = "cilab,meshpoint-one"; + + aliases { + led-boot = &led_status; + led-failsafe = &led_status; + led-running = &led_status; + led-upgrade = &led_status; + }; + + soc { + i2c-gpio { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + compatible = "i2c-gpio"; + gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) /* sda */ + &tlmm 4 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) /* scl */ + >; + + bme280@76 { + status = "okay"; + + compatible = "bosch,bme280"; + reg = <0x76>; + }; + + pcf2129@51 { + status = "okay"; + + compatible = "nxp,pcf2129"; + reg = <0x51>; + }; + + ina230@40 { + status = "okay"; + + compatible = "ti,ina230"; + reg = <0x40>; + shunt-resistor = <2000>; + }; + + ina230@44 { + status = "okay"; + + compatible = "ti,ina230"; + reg = <0x44>; + shunt-resistor = <2000>; + }; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_status: status { + label = "meshpoint-one:blue:status"; + gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>; + }; + }; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts new file mode 100644 index 0000000000..a8c144f928 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts @@ -0,0 +1,337 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq4019.dtsi" +#include +#include +#include +#include + +/ { + model = "ZyXEL NBG6617"; + compatible = "zyxel,nbg6617"; + + chosen { + /* + * the vendor u-boot adds root and mtdparts cmdline parameters + * which we don't want... but we have to overwrite them or else + * the kernel will take them at face value. + */ + bootargs-append = " mtdparts= root=31:13"; + }; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + }; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + tcsr@194b000 { + compatible = "qcom,tcsr"; + reg = <0x194b000 0x100>; + qcom,usb-hsphy-mode-select = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + usb2@60f8800 { + status = "okay"; + + dwc3@6000000 { + #address-cells = <1>; + #size-cells = <0>; + + usb2_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + }; + }; + + usb3@8af8800 { + status = "okay"; + + dwc3@8a00000 { + #address-cells = <1>; + #size-cells = <0>; + + usb3_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + + usb3_port2: port@2 { + reg = <2>; + #trigger-source-cells = <0>; + }; + }; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + }; + + edma@c080000 { + status = "okay"; + }; + }; + + keys { + compatible = "gpio-keys"; + + wlan { + label = "wlan"; + gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; + linux,code = ; + linux,input-type = ; + }; + + wps { + label = "wps"; + gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + reset { + label = "reset"; + gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + power: power { + label = "nbg6617:green:power"; + gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; + }; + + usb { + label = "nbg6617:green:usb"; + gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; + trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>; + linux,default-trigger = "usbport"; + }; + + wlan2G { + label = "nbg6617:green:wlan2G"; + gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; + }; + + wlan5G { + label = "nbg6617:green:wlan5G"; + gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; + }; + + wps { + label = "nbg6617:green:wps"; + gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&tlmm { + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + spi_0_pins: spi_0_pinmux { + mux { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <12>; + bias-disable; + }; + + mux_cs { + function = "gpio"; + pins = "gpio54"; + drive-strength = <2>; + bias-disable; + output-low; + }; + }; + led_pins: led_pinmux { + mux { + pins = "gpio0", "gpio1", "gpio3", "gpio5", "gpio58"; + drive-strength = <0x8>; + bias-disable; + output-low; + }; + }; +}; + +&blsp1_spi1 { /* BLSP1 QUP1 */ + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; + + mx25l25635f@0 { + compatible = "mx25l25635f", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + status = "okay"; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition0@0 { + label = "SBL1"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition1@40000 { + label = "MIBIB"; + reg = <0x00040000 0x00020000>; + read-only; + }; + partition2@60000 { + label = "QSEE"; + reg = <0x00060000 0x00060000>; + read-only; + }; + partition3@c0000 { + label = "CDT"; + reg = <0x000c0000 0x00010000>; + read-only; + }; + partition4@d0000 { + label = "DDRPARAMS"; + reg = <0x000d0000 0x00010000>; + read-only; + }; + partition5@e0000 { + label = "APPSBL"; /* u-boot */ + reg = <0x000e0000 0x00080000>; + /* U-Boot Standalone App "zloader" is located at 0x64000 */ + read-only; + }; + partition6@160000 { + label = "APPSBLENV"; /* u-boot env */ + reg = <0x00160000 0x00010000>; + }; + partition7@170000 { + /* make a backup of this partition! */ + label = "ART"; + reg = <0x00170000 0x00010000>; + read-only; + }; + partition8@180000 { + label = "kernel"; + reg = <0x00180000 0x00400000>; + }; + partition9@580000 { + label = "dualflag"; + reg = <0x00580000 0x00010000>; + read-only; + }; + partition10@590000 { + label = "header"; + reg = <0x00590000 0x00010000>; + }; + partition11@5a0000 { + label = "romd"; + reg = <0x005a0000 0x00100000>; + read-only; + }; + partition12@6a0000 { + label = "not_root_data"; + /* + * for some strange reason, someone at ZyXEL + * had the "great" idea to put the rootfs_data + * in front of rootfs... Don't do that! + * As a result this one, full MebiByte remains + * unused. + */ + reg = <0x006a0000 0x00100000>; + }; + partition13@7a0000 { + label = "rootfs"; + reg = <0x007a0000 0x01860000>; + }; + }; + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&blsp_dma { + status = "okay"; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "ZyXEL-NBG6617"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "ZyXEL-NBG6617"; +}; + +&usb3_ss_phy { + status = "okay"; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&usb2_hs_phy { + status = "okay"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts new file mode 100644 index 0000000000..a0030f77ce --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts @@ -0,0 +1,309 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + model = "ASUS RT-AC58U"; + compatible = "asus,rt-ac58u"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x8000000>; + }; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + chosen { + bootargs-append = " ubi.mtd=UBI_DEV"; + }; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + tcsr@194b000 { + compatible = "qcom,tcsr"; + reg = <0x194b000 0x100>; + qcom,usb-hsphy-mode-select = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + usb3@8af8800 { + status = "okay"; + + dwc3@8a00000 { + #address-cells = <1>; + #size-cells = <0>; + + usb3_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + + usb3_port2: port@2 { + reg = <2>; + #trigger-source-cells = <0>; + }; + }; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + }; + + edma@c080000 { + status = "okay"; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power: status { + label = "rt-ac58u:blue:status"; + gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; + }; + + wan { + label = "rt-ac58u:blue:wan"; + gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; + }; + + wlan2G { + label = "rt-ac58u:blue:wlan2G"; + gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tpt"; + }; + + wlan5G { + label = "rt-ac58u:blue:wlan5G"; + gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy1tpt"; + }; + + usb { + label = "rt-ac58u:blue:usb"; + gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; + trigger-sources = <&usb3_port1>, <&usb3_port2>; + linux,default-trigger = "usbport"; + }; + + lan { + label = "rt-ac58u:blue:lan"; + gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&cryptobam { + status = "okay"; +}; + +&blsp_dma { + status = "okay"; +}; + +&tlmm { + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + mux { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <12>; + bias-disable; + }; + + mux_cs { + function = "gpio"; + pins = "gpio54", "gpio59"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; +}; + +&blsp1_spi1 { /* BLSP1 QUP1 */ + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, + <&tlmm 59 GPIO_ACTIVE_HIGH>; + + flash@0 { + /* + * U-boot looks for "n25q128a11" node, + * if we don't have it, it will spit out the following warning: + * "ipq: fdt fixup unable to find compatible node". + */ + compatible = "jedec,spi-nor"; + reg = <0>; + linux,modalias = "m25p80", "mx25l1606e", "n25q128a11"; + spi-max-frequency = <30000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SBL1"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "MIBIB"; + reg = <0x00040000 0x00020000>; + read-only; + }; + partition@60000 { + label = "QSEE"; + reg = <0x00060000 0x00060000>; + read-only; + }; + partition@c0000 { + label = "CDT"; + reg = <0x000c0000 0x00010000>; + read-only; + }; + partition@d0000 { + label = "DDRPARAMS"; + reg = <0x000d0000 0x00010000>; + read-only; + }; + partition@e0000 { + label = "APPSBLENV"; /* uboot env*/ + reg = <0x000e0000 0x00010000>; + read-only; + }; + partition@f0000 { + label = "APPSBL"; /* uboot */ + reg = <0x000f0000 0x00080000>; + read-only; + }; + partition@170000 { + label = "ART"; + reg = <0x00170000 0x00010000>; + read-only; + }; + /* 0x00180000 - 0x00200000 unused */ + }; + }; + + spi-nand@1 { + compatible = "spi-nand"; + reg = <1>; + spi-max-frequency = <30000000>; + + /* + * U-boot looks for "spinand,mt29f" node, + * if we don't have it, it will spit out the following warning: + * "ipq: fdt fixup unable to find compatible node". + */ + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + /* + * TODO: change to label = "ubi" once we drop 4.14. + * also drop the bootargs-append and all the + * userspace CI_UBIPART="UBI_DEV" remains. + */ + label = "UBI_DEV"; + reg = <0x00000000 0x08000000>; + }; + }; + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usb3_ss_phy { + status = "okay"; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "RT-AC58U"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "RT-AC58U"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts new file mode 100644 index 0000000000..5932638da0 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts @@ -0,0 +1,265 @@ +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2018, David Bauer + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + model = "ZyXEL WRE6606"; + compatible = "zyxel,wre6606"; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + }; + + chosen { + bootargs-append = " mtdparts="; + }; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + }; + + edma@c080000 { + status = "okay"; + qcom,num_gmac = <1>; + }; + }; + + leds { + compatible = "gpio-leds"; + + wps { + label = "wre6606:green:wps"; + gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>; + }; + + wlan5g_green { + label = "wre6606:green:wlan5g"; + gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; + }; + + power: power { + label = "wre6606:green:power"; + gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; + }; + + wlan5g_red { + label = "wre6606:red:wlan5g"; + gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; + }; + + wlan2g_red { + label = "wre6606:red:wlan2g"; + gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; + }; + + wlan2g_green { + label = "wre6606:green:wlan2g"; + gpios = <&tlmm 59 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys"; + + wps { + label = "wps"; + gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&tlmm { + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pin { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <12>; + bias-disable; + }; + pin_cs { + function = "gpio"; + pins = "gpio54"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_spi1 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; + + mx25l12805d@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition0@0 { + label = "SBL1"; + reg = <0x00000000 0x00040000>; + read-only; + }; + + partition1@40000 { + label = "MIBIB"; + reg = <0x00040000 0x00020000>; + read-only; + }; + + partition2@60000 { + label = "QSEE"; + reg = <0x00060000 0x00060000>; + read-only; + }; + + partition3@c0000 { + label = "CDT"; + reg = <0x000c0000 0x00010000>; + read-only; + }; + + partition4@d0000 { + label = "DDRPARAMS"; + reg = <0x000d0000 0x00010000>; + read-only; + }; + + partition5@E0000 { + label = "APPSBLENV"; + reg = <0x000e0000 0x00010000>; + read-only; + }; + + partition6@F0000 { + label = "APPSBL"; + reg = <0x000f0000 0x00080000>; + read-only; + }; + + partition7@170000 { + label = "ART"; + reg = <0x00170000 0x00010000>; + read-only; + }; + + partition8@180000 { + compatible = "denx,fit"; + label = "firmware"; + reg = <0x00180000 0x00ce0000>; + }; + + partition9@e60000 { + label = "manufacture"; + reg = <0x00e60000 0x00050000>; + read-only; + }; + + partition10@eb0000 { + label = "storage"; + reg = <0x00eb0000 0x00150000>; + read-only; + }; + }; + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "ZyXEL-WRE6606"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "ZyXEL-WRE6606"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-a62.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-a62.dts new file mode 100644 index 0000000000..25bbd6b332 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-a62.dts @@ -0,0 +1,243 @@ +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2017-2018, Sven Eckelmann + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + model = "OpenMesh A62"; + compatible = "openmesh,a62"; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@194b000 { + /* select hostmode */ + compatible = "qcom,tcsr"; + reg = <0x194b000 0x100>; + qcom,usb-hsphy-mode-select = ; + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + usb2: usb2@60f8800 { + status = "okay"; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + switch_lan_bmp = <0x10>; + switch_wan_bmp = <0x20>; + + status = "okay"; + }; + + edma@c080000 { + status = "okay"; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + }; + + leds { + compatible = "gpio-leds"; + + red { + label = "a62:red:status"; + gpios = <&tlmm 43 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + power: green { + label = "a62:green:status"; + gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; + }; + + blue { + label = "a62:blue:status"; + gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + }; + + watchdog { + compatible = "linux,wdt-gpio"; + gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; + hw_algo = "toggle"; + /* hw_margin_ms is actually 300s but driver limits it to 60s */ + hw_margin_ms = <60000>; + always-running; + }; +}; + +&tlmm { + serial_pins: serial_pinmux { + mux { + pins = "gpio16", "gpio17"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pin { + function = "blsp_spi0"; + pins = "gpio13", "gpio14", "gpio15"; + drive-strength = <12>; + bias-disable; + }; + pin_cs { + function = "gpio"; + pins = "gpio12"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + enable-usb-power { + gpio-hog; + gpios = <58 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "enable USB2 power"; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_spi1 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + /* partitions are passed via bootloader */ + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&gmac0 { + qcom,phy_mdio_addr = <3>; + qcom,poll_required = <1>; + qcom,forced_speed = <1000>; + qcom,forced_duplex = <1>; + vlan_tag = <1 0x10>; +}; + +&usb2_hs_phy { + status = "okay"; +}; + +&pcie0 { + status = "okay"; + perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; + wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; + + bridge@0,0 { + reg = <0x00000000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + wifi2: wifi@1,0 { + compatible = "qcom,ath10k"; + status = "okay"; + reg = <0x00010000 0 0 0 0>; + qcom,ath10k-calibration-variant = "OM-A62"; + ieee80211-freq-limit = <5170000 5350000>; + }; + }; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "OM-A62"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "OM-A62"; + ieee80211-freq-limit = <5470000 5875000>; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts new file mode 100644 index 0000000000..47202d28fe --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts @@ -0,0 +1,21 @@ +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include "qcom-ipq4019-ap.dk04.1.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK04.1-C1"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi new file mode 100644 index 0000000000..9801354625 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi @@ -0,0 +1,181 @@ +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include "qcom-ipq4019.dtsi" +#include + +/ { + model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1"; + compatible = "qcom,ipq4019"; + + soc { + rng@22000 { + status = "okay"; + }; + + pinctrl@1000000 { + serial_0_pins: serial_pinmux { + mux { + pins = "gpio16", "gpio17"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + serial_1_pins: serial1_pinmux { + mux { + pins = "gpio8", "gpio9"; + function = "blsp_uart1"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pinmux { + function = "blsp_spi0"; + pins = "gpio13", "gpio14", "gpio15"; + }; + pinmux_cs { + function = "gpio"; + pins = "gpio12"; + }; + pinconf { + pins = "gpio13", "gpio14", "gpio15"; + drive-strength = <12>; + bias-disable; + }; + pinconf_cs { + pins = "gpio12"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + i2c_0_pins: i2c_0_pinmux { + pinmux { + function = "blsp_i2c0"; + pins = "gpio10", "gpio11"; + }; + pinconf { + pins = "gpio10", "gpio11"; + drive-strength = <16>; + bias-disable; + }; + }; + + nand_pins: nand_pins { + + pullups { + pins = "gpio52", "gpio53", "gpio58", + "gpio59"; + function = "qpic"; + bias-pull-up; + }; + + pulldowns { + pins = "gpio54", "gpio55", "gpio56", + "gpio57", "gpio60", "gpio61", + "gpio62", "gpio63", "gpio64", + "gpio65", "gpio66", "gpio67", + "gpio68", "gpio69"; + function = "qpic"; + bias-pull-down; + }; + }; + }; + + blsp_dma: dma@7884000 { + status = "okay"; + }; + + spi0: spi@78b5000 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + + mx25l25635e@0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + compatible = "mx25l25635e"; + spi-max-frequency = <24000000>; + }; + }; + + i2c0: i2c@78b7000 { /* BLSP1 QUP2 */ + pinctrl-0 = <&i2c_0_pins>; + pinctrl-names = "default"; + + status = "okay"; + }; + + serial@78af000 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + serial@78b0000 { + pinctrl-0 = <&serial_1_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + usb3_ss_phy: ssphy@9a000 { + status = "okay"; + }; + + usb3_hs_phy: hsphy@a6000 { + status = "okay"; + }; + + usb3: usb3@8af8800 { + status = "okay"; + }; + + usb2_hs_phy: hsphy@a8000 { + status = "okay"; + }; + + usb2: usb2@60f8800 { + status = "okay"; + }; + + cryptobam: dma@8e04000 { + status = "okay"; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + qpic_bam: dma@7984000 { + status = "okay"; + }; + + nand: qpic-nand@79b0000 { + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + }; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts new file mode 100644 index 0000000000..f4c1685f47 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts @@ -0,0 +1,354 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + model = "MobiPromo CM520-79F"; + compatible = "mobipromo,cm520-79f"; + + aliases { + led-boot = &led_sys; + led-failsafe = &led_sys; + led-running = &led_sys; + led-upgrade = &led_sys; + }; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; + reset-delay-us = <1000>; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + tcsr@194b000 { + compatible = "qcom,tcsr"; + reg = <0x194b000 0x100>; + qcom,usb-hsphy-mode-select = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + usb2@60f8800 { + status = "okay"; + + dwc3@6000000 { + #address-cells = <1>; + #size-cells = <0>; + + usb2_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + }; + }; + + usb3@8af8800 { + status = "okay"; + + dwc3@8a00000 { + #address-cells = <1>; + #size-cells = <0>; + + usb3_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + + usb3_port2: port@2 { + reg = <2>; + #trigger-source-cells = <0>; + }; + }; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + }; + + edma@c080000 { + status = "okay"; + }; + }; + + led_spi { + compatible = "spi-gpio"; + #address-cells = <1>; + ranges; + + sck-gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>; + num-chipselects = <0>; + + led_gpio: led_gpio@0 { + compatible = "fairchild,74hc595"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + registers-number = <1>; + spi-max-frequency = <1000000>; + }; + }; + + leds { + compatible = "gpio-leds"; + + usb { + label = "cm520-79f:blue:usb"; + gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "usbport"; + trigger-sources = <&usb3_port1>, <&usb3_port2>, <&usb2_port1>; + }; + + led_sys: can { + label = "cm520-79f:blue:can"; + gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>; + }; + + wan { + label = "cm520-79f:blue:wan"; + gpios = <&led_gpio 0 GPIO_ACTIVE_LOW>; + }; + + lan1 { + label = "cm520-79f:blue:lan1"; + gpios = <&led_gpio 1 GPIO_ACTIVE_LOW>; + }; + + lan2 { + label = "cm520-79f:blue:lan2"; + gpios = <&led_gpio 2 GPIO_ACTIVE_LOW>; + }; + + wlan2g { + label = "cm520-79f:blue:wlan2g"; + gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + wlan5g { + label = "cm520-79f:blue:wlan5g"; + gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_uart1 { + status = "okay"; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&gmac0 { + mtd-mac-address = <&art 0x1006>; +}; + +&gmac1 { + mtd-mac-address = <&art 0x5006>; +}; + +&nand { + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + status = "okay"; + + nand@0 { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SBL1"; + reg = <0x0 0x100000>; + read-only; + }; + + partition@100000 { + label = "MIBIB"; + reg = <0x100000 0x100000>; + read-only; + }; + + partition@200000 { + label = "BOOTCONFIG"; + reg = <0x200000 0x100000>; + }; + + partition@300000 { + label = "QSEE"; + reg = <0x300000 0x100000>; + read-only; + }; + + partition@400000 { + label = "QSEE_1"; + reg = <0x400000 0x100000>; + read-only; + }; + + partition@500000 { + label = "CDT"; + reg = <0x500000 0x80000>; + read-only; + }; + + partition@580000 { + label = "CDT_1"; + reg = <0x580000 0x80000>; + read-only; + }; + + partition@600000 { + label = "BOOTCONFIG1"; + reg = <0x600000 0x80000>; + }; + + partition@680000 { + label = "APPSBLENV"; + reg = <0x680000 0x80000>; + }; + + partition@700000 { + label = "APPSBL"; + reg = <0x700000 0x200000>; + read-only; + }; + + partition@900000 { + label = "APPSBL_1"; + reg = <0x900000 0x200000>; + read-only; + }; + + art: partition@b00000 { + label = "ART"; + reg = <0xb00000 0x80000>; + read-only; + }; + + partition@b80000 { + label = "ubi"; + reg = <0xb80000 0x7480000>; + }; + }; + }; +}; + +&qpic_bam { + status = "okay"; +}; + +&tlmm { + mdio_pins: mdio_pinmux { + mux_1 { + pins = "gpio6"; + function = "mdio"; + bias-pull-up; + }; + + mux_2 { + pins = "gpio7"; + function = "mdc"; + bias-pull-up; + }; + }; + + nand_pins: nand_pins { + pullups { + pins = "gpio52", "gpio53", "gpio58", + "gpio59"; + function = "qpic"; + bias-pull-up; + }; + + pulldowns { + pins = "gpio54", "gpio55", "gpio56", + "gpio57", "gpio60", "gpio61", + "gpio62", "gpio63", "gpio64", + "gpio65", "gpio66", "gpio67", + "gpio68", "gpio69"; + function = "qpic"; + bias-pull-down; + }; + }; +}; + +&usb3_ss_phy { + status = "okay"; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&usb2_hs_phy { + status = "okay"; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "CM520-79F"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "CM520-79F"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c1.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c1.dts new file mode 100644 index 0000000000..df1df2529a --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c1.dts @@ -0,0 +1,80 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT + * + * Copyright (c) 2018 Peng Zhang + * + */ + +#include "qcom-ipq4019-e2600ac.dtsi" +#include +#include + +/ { + model = "Qxwlan E2600AC c1"; + compatible = "qxwlan,e2600ac-c1"; +}; + +&blsp1_spi1 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; + + flash@0 { + reg = <0>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "0:SBL1"; + reg = <0x0 0x40000>; + read-only; + }; + partition@40000 { + label = "0:MIBIB"; + reg = <0x40000 0x20000>; + read-only; + }; + partition@60000 { + label = "0:QSEE"; + reg = <0x60000 0x60000>; + read-only; + }; + partition@c0000 { + label = "0:CDT"; + reg = <0xc0000 0x10000>; + read-only; + }; + partition@d0000 { + label = "0:DDRPARAMS"; + reg = <0xd0000 0x10000>; + read-only; + }; + partition@e0000 { + label = "0:APPSBLENV"; + reg = <0xe0000 0x10000>; + read-only; + }; + partition@f0000 { + label = "0:APPSBL"; + reg = <0xf0000 0x80000>; + read-only; + }; + partition@170000 { + label = "0:ART"; + reg = <0x170000 0x10000>; + read-only; + }; + partition@180000 { + compatible = "denx,fit"; + label = "firmware"; + reg = <0x180000 0x1e80000>; + }; + }; + }; +}; + diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c2.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c2.dts new file mode 100644 index 0000000000..9348ef4eec --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac-c2.dts @@ -0,0 +1,115 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT + * + * Copyright (c) 2018 Peng Zhang + * + */ + +#include "qcom-ipq4019-e2600ac.dtsi" +#include +#include + +/ { + model = "Qxwlan E2600AC c2"; + compatible = "qxwlan,e2600ac-c2"; +}; + +&blsp1_spi1 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; + + flash@0 { + reg = <0>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "0:SBL1"; + reg = <0x0 0x40000>; + read-only; + }; + partition@40000 { + label = "0:MIBIB"; + reg = <0x40000 0x20000>; + read-only; + }; + partition@60000 { + label = "0:QSEE"; + reg = <0x60000 0x60000>; + read-only; + }; + partition@c0000 { + label = "0:CDT"; + reg = <0xc0000 0x10000>; + read-only; + }; + partition@d0000 { + label = "0:DDRPARAMS"; + reg = <0xd0000 0x10000>; + read-only; + }; + partition@e0000 { + label = "0:APPSBLENV"; + reg = <0xe0000 0x10000>; + read-only; + }; + partition@f0000 { + label = "0:APPSBL"; + reg = <0xf0000 0x80000>; + read-only; + }; + partition@170000 { + label = "0:ART"; + reg = <0x170000 0x10000>; + read-only; + }; + }; + }; +}; + +&nand { + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + status = "okay"; + + nand@0 { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ubi"; + reg = <0x00000000 0x04000000>; + }; + }; + }; +}; + +&tlmm { + nand_pins: nand-pins { + + pullups { + pins = "gpio53", "gpio58", "gpio59"; + function = "qpic"; + bias-pull-up; + }; + + pulldowns { + pins = "gpio54", "gpio55", "gpio56", + "gpio57", "gpio60", "gpio61", + "gpio62", "gpio63", "gpio64", + "gpio65", "gpio66", "gpio67", + "gpio68", "gpio69"; + function = "qpic"; + bias-pull-down; + }; + }; +}; + diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi new file mode 100644 index 0000000000..f4af2ba25f --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-e2600ac.dtsi @@ -0,0 +1,266 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT + * + * Copyright (c) 2018 Peng Zhang + * + */ + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + + model = "Qxwlan E2600AC"; + compatible = "qcom,ipq4019"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256MB */ + }; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + tcsr@194b000 { + /* select hostmode */ + compatible = "qcom,tcsr"; + reg = <0x194b000 0x100>; + qcom,usb-hsphy-mode-select = ; + status = "okay"; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + usb2: usb2@60f8800 { + status = "okay"; + + dwc3@6000000 { + #address-cells = <1>; + #size-cells = <0>; + + usb2_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + }; + }; + + serial@78af000 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + serial@78b0000 { + pinctrl-0 = <&serial_1_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + i2c@78b7000 { /* BLSP1 QUP2 */ + pinctrl-0 = <&i2c_0_pins>; + pinctrl-names = "default"; + + status = "okay"; + }; + + usb3: usb3@8af8800 { + status = "okay"; + + dwc3@8a00000 { + #address-cells = <1>; + #size-cells = <0>; + + usb3_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + + usb3_port2: port@2 { + reg = <2>; + #trigger-source-cells = <0>; + }; + }; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + }; + + edma@c080000 { + status = "okay"; + }; + + leds { + compatible = "gpio-leds"; + + led1 { + label = "e2600ac:green:wlan0"; + gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; + }; + + led2 { + label = "e2600ac:green:wlan1"; + gpios = <&tlmm 36 GPIO_ACTIVE_LOW>; + }; + + led3 { + label = "e2600ac:green:usb"; + gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; + trigger-sources = <&usb2_port1>, <&usb3_port1>, <&usb3_port2>; + linux,default-trigger = "usbport"; + }; + + led4 { + label = "e2600ac:green:ctrl1"; + gpios = <&tlmm 51 GPIO_ACTIVE_LOW>; + }; + + led5 { + label = "e2600ac:green:ctrl2"; + gpios = <&tlmm 30 GPIO_ACTIVE_LOW>; + }; + + led6 { + label = "e2600ac:green:ctrl3"; + gpios = <&tlmm 31 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&qpic_bam { + status = "okay"; +}; + +&tlmm { + i2c_0_pins: i2c-0-pinmux { + mux { + pins = "gpio20", "gpio21"; + function = "blsp_i2c0"; + bias-disable; + }; + }; + + mdio_pins: mdio_pinmux { + mux_1 { + pins = "gpio6"; + function = "mdio"; + bias-pull-up; + }; + mux_2 { + pins = "gpio7"; + function = "mdc"; + bias-pull-up; + }; + }; + + serial_0_pins: serial0-pinmux { + mux { + pins = "gpio16", "gpio17"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + serial_1_pins: serial1_pinmux { + mux { + pins = "gpio8", "gpio9"; + function = "blsp_uart1"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pinmux { + function = "blsp_spi0"; + pins = "gpio13", "gpio14", "gpio15"; + drive-strength = <12>; + bias-disable; + }; + pinmux_cs { + function = "gpio"; + pins = "gpio12"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; +}; + +&usb3_ss_phy { + status = "okay"; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&usb2_hs_phy { + status = "okay"; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "Qxwlan-E2600AC"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "Qxwlan-E2600AC"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-ea8300.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-ea8300.dts new file mode 100644 index 0000000000..cfc3037fb2 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-ea8300.dts @@ -0,0 +1,399 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/* + * Device Tree Source for Linksys EA8300 (Dallas) + * + * Copyright (C) 2019 Jeff Kletsky + * + */ + +/dts-v1/; + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + model = "Linksys EA8300 (Dallas)"; + compatible = "linksys,ea8300", "qcom,ipq4019"; + + + aliases { + led-boot = &led_wps_amber; + led-failsafe = &led_wps; + led-running = &led_linksys; + led-upgrade = &led_world; + serial0 = &blsp1_uart1; + }; + + + leds { + compatible = "gpio-leds"; + + // Retain node names from running OEM on EA8300 + + // Front panel LEDs, top to bottom + + led_plug: diag { + label = "ea8300:amber:plug"; + gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; + }; + + led_world: internet { + label = "ea8300:amber:world"; + gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>; + }; + + led_wps: wps { + label = "ea8300:white:wps"; + gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; + }; + + led_wps_amber: wps_amber { + label = "ea8300:amber:wps"; + gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>; + panic-indicator; + }; + + led_linksys: pwr { + label = "ea8300:white:linksys"; + gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; + }; + + // On back panel, above USB socket + + led_usb: usb { + label = "ea8300:green:usb"; + gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; + trigger-sources = <&usb3_port1>, <&usb3_port2>, + <&usb2_port1>; + linux,default-trigger = "usbport"; + }; + }; + + + keys { + compatible = "gpio-keys"; + + button@0 { + label = "reset"; + linux,code = ; + gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; + }; + + button@1 { + label = "wps"; + linux,code = ; + gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; + }; + }; + + + // + // OEM U-Boot provides either + // init=/sbin/init rootfstype=ubifs ubi.mtd=11,2048 \ + // root=ubi0:ubifs rootwait rw + // or the same with ubi.mtd=13,2048 + // + + chosen { + bootargs-append = " root=/dev/ubiblock0_0 rootfstype=squashfs ro"; + }; + + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; + }; + + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + tcsr@194b000 { + compatible = "qcom,tcsr"; + reg = <0x194b000 0x100>; + qcom,usb-hsphy-mode-select = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + usb2@60f8800 { + status = "okay"; + + dwc3@6000000 { + #address-cells = <1>; + #size-cells = <0>; + + usb2_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + }; + }; + + usb3@8af8800 { + status = "okay"; + + dwc3@8a00000 { + #address-cells = <1>; + #size-cells = <0>; + + usb3_port1: port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + + usb3_port2: port@2 { + reg = <2>; + #trigger-source-cells = <0>; + }; + }; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + }; + + edma@c080000 { + status = "okay"; + }; + }; +}; + + +&blsp_dma { + status = "okay"; +}; + +&blsp1_uart1 { + status = "okay"; + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + +}; + +&cryptobam { + status = "okay"; +}; + +&nand { + status = "okay"; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + + nand@0 { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "sbl1"; + reg = <0x0 0x100000>; + read-only; + }; + + partition@100000 { + label = "mibib"; + reg = <0x100000 0x100000>; + read-only; + }; + + partition@200000 { + label = "qsee"; + reg = <0x200000 0x100000>; + read-only; + }; + + partition@300000 { + label = "cdt"; + reg = <0x300000 0x80000>; + read-only; + }; + + partition@380000 { + label = "appsblenv"; + reg = <0x380000 0x80000>; + read-only; + }; + + partition@400000 { + label = "ART"; + reg = <0x400000 0x80000>; + read-only; + }; + + partition@480000 { + label = "appsbl"; + reg = <0x480000 0x200000>; + read-only; + }; + + partition@680000 { + label = "u_env"; + reg = <0x680000 0x80000>; + // writable -- U-Boot environment + }; + + partition@700000 { + label = "s_env"; + reg = <0x700000 0x40000>; + // writable -- Boot counter records + }; + + partition@740000 { + label = "devinfo"; + reg = <0x740000 0x40000>; + read-only; + }; + + partition@780000 { + label = "kernel"; + reg = <0x780000 0x5800000>; + }; + + partition@a80000 { + label = "rootfs"; + reg = <0xa80000 0x5500000>; + }; + + partition@5f80000 { + label = "alt_kernel"; + reg = <0x5f80000 0x5800000>; + }; + + partition@6280000 { + label = "alt_rootfs"; + reg = <0x6280000 0x5500000>; + }; + + partition@b780000 { + label = "sysdiag"; + reg = <0xb780000 0x100000>; + read-only; + }; + + partition@b880000 { + label = "syscfg"; + reg = <0xb880000 0x4680000>; + read-only; + }; + }; + }; +}; + +&pcie0 { + status = "okay"; + + perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; + wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; + + bridge@0,0 { + reg = <0x00000000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + wifi2: wifi@1,0 { + compatible = "qcom,ath10k"; + reg = <0x00010000 0 0 0 0>; + }; + }; +}; + +&qpic_bam { + status = "okay"; +}; + +&tlmm { + serial_0_pins: serial0-pinmux { + pins = "gpio16", "gpio17"; + function = "blsp_uart0"; + bias-disable; + }; + + nand_pins: nand_pins { + pullups { + pins = "gpio53", "gpio58", "gpio59"; + function = "qpic"; + bias-pull-up; + }; + + // gpio61 controls led_usb + + pulldowns { + pins = "gpio55", "gpio56", "gpio57", + "gpio60", "gpio62", "gpio63", + "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68", "gpio69"; + function = "qpic"; + bias-pull-down; + }; + }; +}; + +&usb2_hs_phy { + status = "okay"; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&usb3_ss_phy { + status = "okay"; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "linksys-ea8300-fcc"; +}; + +&wifi1 { + status = "okay"; + ieee80211-freq-limit = <5170000 5330000>; + qcom,ath10k-calibration-variant = "linksys-ea8300-fcc"; +}; + +&wifi2 { + status = "okay"; + ieee80211-freq-limit = <5490000 5835000>; + qcom,ath10k-calibration-variant = "linksys-ea8300-fcc"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts new file mode 100644 index 0000000000..ec3ce447cc --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-eap2200.dts @@ -0,0 +1,282 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq4019.dtsi" +#include +#include + +/ { + model = "EnGenius EAP2200"; + compatible = "engenius,eap2200"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + keys { + compatible = "gpio-keys"; + + wps { + label = "wps"; + gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "eap2200:amber:power"; + gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; + }; + + lan1 { + label = "eap2200:blue:lan1"; + gpios = <&tlmm 44 GPIO_ACTIVE_LOW>; + }; + + lan2 { + label = "eap2200:blue:lan2"; + gpios = <&tlmm 45 GPIO_ACTIVE_LOW>; + }; + + wlan2g { + label = "eap2200:blue:wlan2g"; + gpios = <&tlmm 46 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + wlan5g { + label = "eap2200:yellow:wlan5g"; + gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + + wlan5g2 { + label = "eap2200:yellow:wlan5g2"; + gpios = <&tlmm 48 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy2tpt"; + }; + + mode { + label = "eap2200:blue:mode"; + gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; + }; + }; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + switch_lan_bmp = <0x10>; + }; + + edma@c080000 { + status = "okay"; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_spi1 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition0@0 { + label = "0:SBL1"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition1@40000 { + label = "0:MIBIB"; + reg = <0x00040000 0x00020000>; + read-only; + }; + partition2@60000 { + label = "0:QSEE"; + reg = <0x00060000 0x00060000>; + read-only; + }; + partition3@c0000 { + label = "0:CDT"; + reg = <0x000c0000 0x00010000>; + read-only; + }; + partition4@d0000 { + label = "0:DDRPARAMS"; + reg = <0x000d0000 0x00010000>; + read-only; + }; + partition5@e0000 { + label = "0:APPSBLENV"; + reg = <0x000e0000 0x00010000>; + read-only; + }; + partition6@f0000 { + label = "0:APPSBL"; + reg = <0x000f0000 0x00080000>; + read-only; + }; + partition7@170000 { + label = "0:ART"; + reg = <0x00170000 0x00010000>; + read-only; + }; + }; + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&gmac0 { + vlan_tag = <1 0x10>; +}; + +&nand { + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + status = "okay"; + + nand@0 { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "rootfs1"; + reg = <0x00000000 0x04000000>; + }; + partition@40000000 { + label = "ubi"; + reg = <0x04000000 0x04000000>; + }; + + }; + }; +}; + +&pcie0 { + status = "okay"; + perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; + wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; + + bridge@0,0 { + reg = <0x00000000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + wifi2: wifi@1,0 { + compatible = "qcom,ath10k"; + reg = <0x00010000 0 0 0 0>; + ieee80211-freq-limit = <5470000 5875000>; + qcom,ath10k-calibration-variant = "EnGenius-EAP2200"; + }; + }; +}; + +&qpic_bam { + status = "okay"; +}; + +&tlmm { + nand_pins: nand_pins { + pullups { + pins = "gpio53", "gpio58", "gpio59"; + function = "qpic"; + bias-pull-up; + }; + + pulldowns { + pins = "gpio54", "gpio55", "gpio56", + "gpio57", "gpio60", "gpio61", + "gpio62", "gpio63", "gpio64", + "gpio65", "gpio66", "gpio67", + "gpio68", "gpio69"; + function = "qpic"; + bias-pull-down; + }; + }; + + serial_0_pins: serial_pinmux { + mux { + pins = "gpio16", "gpio17"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pinmux { + function = "blsp_spi0"; + pins = "gpio13", "gpio14", "gpio15"; + drive-strength = <12>; + bias-disable; + }; + pinmux_cs { + function = "gpio"; + pins = "gpio12"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "EnGenius-EAP2200"; +}; + +&wifi1 { + status = "okay"; + ieee80211-freq-limit = <5170000 5350000>; + qcom,ath10k-calibration-variant = "EnGenius-EAP2200"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts new file mode 100644 index 0000000000..b04a61dc04 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzbox-7530.dts @@ -0,0 +1,303 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + model = "AVM FRITZ!Box 7530"; + compatible = "avm,fritzbox-7530"; + + aliases { + led-boot = &power_green; + led-failsafe = &info_red; + led-running = &power_green; + led-upgrade = &info_green; + }; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + tcsr@194b000 { + compatible = "qcom,tcsr"; + reg = <0x194b000 0x100>; + qcom,usb-hsphy-mode-select = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + usb3@8af8800 { + status = "okay"; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + }; + + edma@c080000 { + status = "okay"; + qcom,num_gmac = <1>; + }; + }; + + keys { + compatible = "gpio-keys"; + + wlan { + label = "wlan"; + gpios = <&tlmm 42 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&tlmm 41 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + dect { + label = "dect"; + gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + info_red: info_red { + label = "fritzbox-7530:red:info"; + gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; + }; + + info_green: info { + label = "fritzbox-7530:green:info"; + gpios = <&tlmm 33 GPIO_ACTIVE_LOW>; + }; + + wlan { + label = "fritzbox-7530:green:wlan"; + gpios = <&tlmm 34 GPIO_ACTIVE_LOW>; + }; + + fon { + label = "fritzbox-7530:green:fon"; + gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + }; + + power_green: power { + label = "fritzbox-7530:green:power"; + gpios = <&tlmm 39 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "fritzbox-7530:green:wps"; + gpios = <&tlmm 45 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&tlmm { + serial_0_pins: serial_pinmux { + mux { + pins = "gpio16", "gpio17"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + nand_pins: nand_pins { + pullups { + pins = "gpio53", "gpio58", "gpio59"; + function = "qpic"; + bias-pull-up; + }; + + pulldowns { + pins = "gpio54", "gpio55", "gpio56", + "gpio57", "gpio60", "gpio61", + "gpio62", "gpio63", "gpio64", + "gpio65", "gpio66", "gpio67", + "gpio68", "gpio69"; + function = "qpic"; + bias-pull-down; + }; + }; + + usb-power { + line-name = "enable USB3 power"; + gpios = <49 GPIO_ACTIVE_HIGH>; + gpio-hog; + output-high; + }; +}; + +&nand { + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + status = "okay"; + + nand@0 { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SBL1"; + reg = <0x000000 0x80000>; + read-only; + }; + + partition@80000 { + label = "MIBIB"; + reg = <0x080000 0x80000>; + read-only; + }; + + partition@100000 { + label = "QSEE"; + reg = <0x100000 0x80000>; + read-only; + }; + + partition@180000 { + label = "CDT"; + reg = <0x180000 0x40000>; + read-only; + }; + + partition@1c0000 { + label = "QSEE_B"; + reg = <0x1c0000 0x80000>; + read-only; + }; + + partition@240000 { + label = "urlader0"; + reg = <0x240000 0x40000>; + read-only; + }; + + partition@280000 { + label = "urlader1"; + reg = <0x280000 0x40000>; + read-only; + }; + + partition@2c0000 { + label = "nand-tffs"; + reg = <0x2c0000 0x840000>; + read-only; + }; + + partition@b00000 { + /* 'kernel1' in AVM firmware */ + label = "uboot0"; + reg = <0xb00000 0x400000>; + }; + + partition@f00000 { + /* 'kernel2' in AVM firmware */ + label = "uboot1"; + reg = <0xf00000 0x400000>; + }; + + partition@1300000 { + label = "ubi"; + reg = <0x1300000 0x6d00000>; + }; + }; + }; +}; + +&cryptobam { + status = "okay"; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usb3_ss_phy { + status = "okay"; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&qpic_bam { + status = "okay"; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "AVM-FRITZBox-7530"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "AVM-FRITZBox-7530"; +}; + +&pcie0 { + status = "okay"; + + perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; + wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; + + bridge@0,0 { + reg = <0x00000000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + dsl@1,0 { + compatible = "intel,vrx518"; + status = "okay"; + reg = <0x00010000 0 0 0 0>; + }; + }; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts new file mode 100644 index 0000000000..e9b96b996a --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts @@ -0,0 +1,267 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + model = "AVM FRITZ!Repeater 1200"; + compatible = "avm,fritzrepeater-1200"; + + aliases { + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_green; + led-upgrade = &power_red; + label-mac-device = &wifi0; + }; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */ + switch_lan_bmp = <0x0>; /* lan port bitmap */ + switch_wan_bmp = <0x10>; /* wan port bitmap */ + }; + + edma@c080000 { + status = "okay"; + phy-mode = "rgmii-rxid"; + qcom,num_gmac = <1>; + qcom,single-phy; + }; + }; + + key { + compatible = "gpio-keys"; + + wps { + label = "WPS button"; + gpios = <&tlmm 10 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + power_red: power_red { + label = "fritzwlan-1200:red:power"; + gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; + }; + + power_green: power_green { + label = "fritzwlan-1200:green:power"; + gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>; + }; + + power_yellow { + label = "fritzwlan-1200:yellow:power"; + gpios = <&tlmm 49 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&tlmm { + serial_0_pins: serial_pinmux { + mux { + pins = "gpio16", "gpio17"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + nand_pins: nand_pins { + pullups { + pins = "gpio53", "gpio58", "gpio59"; + function = "qpic"; + bias-pull-up; + }; + + pulldowns { + pins = "gpio54", "gpio55", "gpio56", + "gpio57", "gpio60", "gpio61", + "gpio62", "gpio63", "gpio64", + "gpio65", "gpio66", "gpio67", + "gpio68", "gpio69"; + function = "qpic"; + bias-pull-down; + }; + }; + + mdio_pins: mdio_pinmux { + mux_1 { + pins = "gpio6"; + function = "mdio"; + bias-pull-up; + }; + mux_2 { + pins = "gpio7"; + function = "mdc"; + bias-pull-up; + }; + }; + + phy-reset { + line-name = "PHY-reset"; + gpios = <19 GPIO_ACTIVE_HIGH>; + gpio-hog; + output-high; + }; + + phy-reset-2 { + line-name = "PHY-reset-2"; + gpios = <47 GPIO_ACTIVE_HIGH>; + gpio-hog; + output-high; + }; +}; + +&nand { + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + status = "okay"; + + nand@0 { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SBL1"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "MIBIB"; + reg = <0x80000 0x80000>; + read-only; + }; + + partition@100000 { + label = "QSEE"; + reg = <0x100000 0x80000>; + read-only; + }; + + partition@180000 { + label = "CDT"; + reg = <0x180000 0x40000>; + read-only; + }; + + partition@1c0000 { + label = "QSEE_B"; + reg = <0x1c0000 0x80000>; + read-only; + }; + + partition@240000 { + label = "urlader0"; + reg = <0x240000 0x40000>; + read-only; + }; + + partition@280000 { + label = "urlader1"; + reg = <0x280000 0x40000>; + read-only; + }; + + partition@2c0000 { + label = "nand-tffs"; + reg = <0x2c0000 0x840000>; + read-only; + }; + + partition@b00000 { + /* 'kernel1' in AVM firmware */ + label = "uboot0"; + reg = <0xb00000 0x400000>; + }; + + partition@f00000 { + /* 'kernel2' in AVM firmware */ + label = "uboot1"; + reg = <0xf00000 0x400000>; + }; + + partition@1300000 { + label = "ubi"; + reg = <0x1300000 0x6d00000>; + }; + }; + }; +}; + +&cryptobam { + status = "okay"; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&qpic_bam { + status = "okay"; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200"; +}; + +&gmac0 { + qcom,phy_mdio_addr = <0>; + qcom,poll_required = <1>; + vlan_tag = <0 0x20>; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts new file mode 100644 index 0000000000..6914917eb3 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-3000.dts @@ -0,0 +1,264 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + model = "AVM FRITZ!Repeater 3000"; + compatible = "avm,fritzrepeater-3000"; + + aliases { + led-boot = &power_led; + led-failsafe = &power_led; + led-running = &power_led; + led-upgrade = &power_led; + }; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + + switch_lan_bmp = <0x10>; + switch_wan_bmp = <0x20>; + }; + + edma@c080000 { + status = "okay"; + }; + }; + + key { + compatible = "gpio-keys"; + + connect { + label = "Connect"; + gpios = <&tlmm 10 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + connect_red { + label = "fritzwlan-3000:red:connect"; + gpios = <&tlmm 30 GPIO_ACTIVE_LOW>; + }; + + connect_green { + label = "fritzwlan-3000:green:connect"; + gpios = <&tlmm 31 GPIO_ACTIVE_LOW>; + }; + + connect_blue { + label = "fritzwlan-3000:blue:connect"; + gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; + }; + + power_led: power { + label = "fritzwlan-3000:green:power"; + gpios = <&tlmm 33 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&tlmm { + serial_0_pins: serial_pinmux { + mux { + pins = "gpio16", "gpio17"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + nand_pins: nand_pins { + pullups { + pins = "gpio53", "gpio58", "gpio59"; + function = "qpic"; + bias-pull-up; + }; + + pulldowns { + pins = "gpio54", "gpio55", "gpio56", + "gpio57", "gpio60", "gpio61", + "gpio62", "gpio63", "gpio64", + "gpio65", "gpio66", "gpio67", + "gpio68", "gpio69"; + function = "qpic"; + bias-pull-down; + }; + }; +}; + +&nand { + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + status = "okay"; + + nand@0 { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SBL1"; + reg = <0x000000 0x80000>; + read-only; + }; + + partition@80000 { + label = "MIBIB"; + reg = <0x080000 0x80000>; + read-only; + }; + + partition@100000 { + label = "QSEE"; + reg = <0x100000 0x80000>; + read-only; + }; + + partition@180000 { + label = "CDT"; + reg = <0x180000 0x40000>; + read-only; + }; + + partition@1c0000 { + label = "QSEE_B"; + reg = <0x1c0000 0x80000>; + read-only; + }; + + partition@240000 { + label = "urlader0"; + reg = <0x240000 0x40000>; + read-only; + }; + + partition@280000 { + label = "urlader1"; + reg = <0x280000 0x40000>; + read-only; + }; + + partition@2c0000 { + label = "nand-tffs"; + reg = <0x2c0000 0x840000>; + read-only; + }; + + partition@b00000 { + /* 'kernel1' in AVM firmware */ + label = "uboot0"; + reg = <0xb00000 0x400000>; + }; + + partition@f00000 { + /* 'kernel2' in AVM firmware */ + label = "uboot1"; + reg = <0xf00000 0x400000>; + }; + + partition@1300000 { + label = "ubi"; + reg = <0x1300000 0x6d00000>; + }; + }; + }; +}; + +&cryptobam { + status = "okay"; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&qpic_bam { + status = "okay"; +}; + +&wifi0 { + status = "okay"; + /* BDFs are identical for the FRITZ!Box 7530 and the FRITZ!Repeater 3000 */ + qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-3000"; +}; + +&wifi1 { + status = "okay"; + ieee80211-freq-limit = <5170000 5350000>; + /* BDFs are identical for the FRITZ!Box 7530 and the FRITZ!Repeater 3000 */ + qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-3000"; +}; + +&pcie0 { + status = "okay"; + + perst-gpio = <&tlmm 35 GPIO_ACTIVE_LOW>; + wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; + + bridge@0,0 { + reg = <0x00000000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + wifi@1,0 { + /* QCA9984 */ + compatible = "qcom,ath10k"; + status = "okay"; + reg = <0x00010000 0 0 0 0>; + ieee80211-freq-limit = <5470000 5875000>; + /* Uses the reference BDF */ + }; + }; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts new file mode 100644 index 0000000000..8fe7644a9b --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-habanero-dvk.dts @@ -0,0 +1,357 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/* Copyright (c) 2019, Robert Marko */ + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + model = "8devices Habanero DVK"; + compatible = "8dev,habanero-dvk"; + + aliases { + led-boot = &led_status; + led-failsafe = &led_status; + led-running = &led_status; + led-upgrade = &led_upgrade; + }; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + counter@4a1000 { + compatible = "qcom,qca-gcnt"; + reg = <0x4a1000 0x4>; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + tcsr@194b000 { + status = "okay"; + + compatible = "qcom,tcsr"; + reg = <0x194b000 0x100>; + qcom,usb-hsphy-mode-select = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + usb2: usb2@60f8800 { + status = "okay"; + }; + + usb3: usb3@8af8800 { + status = "okay"; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + }; + + edma@c080000 { + status = "okay"; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_status: status { + label = "habanero-dvk:green:status"; + gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; + panic-indicator; + }; + + led_upgrade: upgrade { + label = "habanero-dvk:green:upgrade"; + gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>; + }; + + wlan2g { + label = "habanero-dvk:green:wlan2g"; + gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tpt"; + }; + + wlan5g { + label = "habanero-dvk:green:wlan5g"; + gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy1tpt"; + }; + }; +}; + +&vqmmc { + status = "okay"; +}; + +&sdhci { + status = "okay"; + + pinctrl-0 = <&sd_pins>; + pinctrl-names = "default"; + cd-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>; + vqmmc-supply = <&vqmmc>; +}; + +&qpic_bam { + status = "okay"; +}; + +&tlmm { + mdio_pins: mdio_pinmux { + mux_1 { + pins = "gpio6"; + function = "mdio"; + bias-pull-up; + }; + + mux_2 { + pins = "gpio7"; + function = "mdc"; + bias-pull-up; + }; + }; + + serial_pins: serial_pinmux { + mux { + pins = "gpio16", "gpio17"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pinmux { + function = "blsp_spi0"; + pins = "gpio13", "gpio14", "gpio15"; + drive-strength = <12>; + bias-disable; + }; + + pinmux_cs { + function = "gpio"; + pins = "gpio12"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + nand_pins: nand_pins { + pullups { + pins = "gpio52", "gpio53", "gpio58", "gpio59"; + function = "qpic"; + bias-pull-up; + }; + + pulldowns { + pins = "gpio54", "gpio55", "gpio56", "gpio57", + "gpio60", "gpio62", "gpio63", "gpio64", + "gpio65", "gpio66", "gpio67", "gpio68", + "gpio69"; + function = "qpic"; + bias-pull-down; + }; + }; + + sd_pins: sd_pins { + pinmux { + function = "sdio"; + pins = "gpio23", "gpio24", "gpio25", "gpio26", + "gpio28", "gpio29", "gpio30", "gpio31"; + drive-strength = <10>; + }; + + pinmux_sd_clk { + function = "sdio"; + pins = "gpio27"; + drive-strength = <16>; + }; + + pinmux_sd7 { + function = "sdio"; + pins = "gpio32"; + drive-strength = <10>; + bias-disable; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_spi1 { + status = "okay"; + + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <24000000>; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SBL1"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "MIBIB"; + reg = <0x00040000 0x00020000>; + read-only; + }; + partition@60000 { + label = "QSEE"; + reg = <0x00060000 0x00060000>; + read-only; + }; + partition@c0000 { + label = "CDT"; + reg = <0x000c0000 0x00010000>; + read-only; + }; + partition@d0000 { + label = "DDRPARAMS"; + reg = <0x000d0000 0x00010000>; + read-only; + }; + partition@e0000 { + label = "APPSBLENV"; /* uboot env */ + reg = <0x000e0000 0x00010000>; + read-only; + }; + partition@f0000 { + label = "APPSBL"; /* uboot */ + reg = <0x000f0000 0x00080000>; + read-only; + }; + partition@170000 { + label = "ART"; + reg = <0x00170000 0x00010000>; + read-only; + }; + partition@180000 { + label = "cfg"; + reg = <0x00180000 0x00040000>; + }; + partition@1c0000 { + label = "firmware"; + compatible = "denx,fit"; + reg = <0x001c0000 0x01e40000>; + }; + }; + }; +}; + +/* Some DVK boards ship without NAND */ +&nand { + status = "okay"; + + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; +}; + +&blsp1_uart1 { + status = "okay"; + + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; +}; + +&cryptobam { + status = "okay"; +}; + +&pcie0 { + status = "okay"; + + perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; + wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; + + /* Free slot for use */ + bridge@0,0 { + reg = <0x00000000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; +}; + +&wifi0 { + status = "okay"; + + qcom,ath10k-calibration-variant = "8devices-Habanero"; +}; + +&wifi1 { + status = "okay"; + + qcom,ath10k-calibration-variant = "8devices-Habanero"; +}; + +&usb3_ss_phy { + status = "okay"; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&usb2_hs_phy { + status = "okay"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts new file mode 100644 index 0000000000..a063f8e952 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-map-ac2200.dts @@ -0,0 +1,311 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/dts-v1/; + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + model = "ASUS Lyra MAP-AC2200"; + compatible = "asus,map-ac2200"; + + aliases { + led-boot = &led_blue0; + led-failsafe = &led_red0; + led-running = &led_blue0; + led-upgrade = &led_red0; + }; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + usb2@60f8800 { + status = "okay"; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + }; + + edma@c080000 { + status = "okay"; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 34 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&nand { + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + status = "okay"; + + nand@0 { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SBL1"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "MIBIB"; + reg = <0x80000 0x80000>; + read-only; + }; + + partition@100000 { + label = "QSEE"; + reg = <0x100000 0x100000>; + read-only; + }; + + partition@200000 { + label = "CDT"; + reg = <0x200000 0x80000>; + read-only; + }; + + partition@280000 { + label = "APPSBL"; + reg = <0x280000 0x140000>; + read-only; + }; + + partition@3c0000 { + label = "APPSBLENV"; + reg = <0x3c0000 0x40000>; + read-only; + }; + + partition@400000 { + label = "ubi"; + reg = <0x400000 0x7c00000>; + }; + }; + }; +}; + +&tlmm { + i2c_0_pins: i2c_0_pinmux { + pinmux { + function = "blsp_i2c0"; + pins = "gpio20", "gpio21"; + drive-strength = <16>; + bias-disable; + }; + }; + + serial_pins: serial_pinmux { + mux { + pins = "gpio16", "gpio17"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + nand_pins: nand_pins { + pullups { + pins = "gpio52", "gpio53", "gpio58", + "gpio59"; + function = "qpic"; + bias-pull-up; + }; + + pulldowns { + pins = "gpio54", "gpio55", "gpio56", + "gpio57", "gpio60", "gpio61", + "gpio62", "gpio63", "gpio64", + "gpio65", "gpio66", "gpio67", + "gpio68", "gpio69"; + function = "qpic"; + bias-pull-down; + }; + }; +}; + +&cryptobam { + status = "okay"; +}; + +&blsp_dma { + status = "okay"; +}; + +&qpic_bam { + status = "okay"; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200"; + ieee80211-freq-limit = <5470000 5875000>; +}; + +&pcie0 { + status = "okay"; + perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; + wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; + + bridge@0,0 { + reg = <0x00000000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + wifi2: wifi@1,0 { + compatible = "qcom,ath10k"; + status = "okay"; + reg = <0x00010000 0 0 0 0>; + qcom,ath10k-calibration-variant = "ASUS-MAP-AC2200"; + ieee80211-freq-limit = <5170000 5350000>; + }; + }; +}; + +&usb2_hs_phy { + /* Bluetooth module attached via USB */ + status = "okay"; +}; + +&blsp1_i2c3 { + pinctrl-0 = <&i2c_0_pins>; + pinctrl-names = "default"; + status = "okay"; + + led-controller@32 { + /* 9-channel RGB LED controller */ + compatible = "national,lp5523"; + reg = <0x32>; + clock-mode = [01]; + + led_blue0: blue0 { + chan-name = "blue0"; + label = "map-ac2200:blue:chan0"; + led-cur = [fa]; + max-cur = [ff]; + }; + + blue1 { + chan-name = "blue1"; + label = "map-ac2200:blue:chan1"; + led-cur = [fa]; + max-cur = [ff]; + }; + + blue2 { + chan-name = "blue2"; + label = "map-ac2200:blue:chan2"; + led-cur = [fa]; + max-cur = [ff]; + }; + + led_green0: green0 { + chan-name = "green0"; + label = "map-ac2200:green:chan0"; + led-cur = [fa]; + max-cur = [ff]; + }; + + green1 { + chan-name = "green1"; + label = "map-ac2200:green:chan1"; + led-cur = [fa]; + max-cur = [ff]; + }; + + green2 { + chan-name = "green2"; + label = "map-ac2200:green:chan2"; + led-cur = [fa]; + max-cur = [ff]; + }; + + led_red0: red0 { + chan-name = "red0"; + label = "map-ac2200:red:chan0"; + led-cur = [fa]; + max-cur = [ff]; + }; + + red1 { + chan-name = "red1"; + label = "map-ac2200:red:chan1"; + led-cur = [fa]; + max-cur = [ff]; + }; + + red2 { + chan-name = "red2"; + label = "map-ac2200:red:chan2"; + led-cur = [fa]; + max-cur = [ff]; + }; + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts new file mode 100644 index 0000000000..2f17424e55 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-rtl30vw.dts @@ -0,0 +1,385 @@ +// SPDX-License-Identifier: ISC +// Copyright (c) 2015, The Linux Foundation. All rights reserved. +// Copyright (c) 2019, Cezary Jackiewicz . +// Copyright (c) 2020, Pawel Dembicki . + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + model = "Cell C RTL30VW"; + compatible = "cellc,rtl30vw"; + + aliases { + led-boot = &led_power_blue; + led-failsafe = &led_power_red; + led-running = &led_power_blue; + led-upgrade = &led_power_red; + }; + + chosen { + bootargs-append = "ubi.mtd=ubifs root=/dev/ubiblock0_0 rootfstype=squashfs ro"; + }; + + led_spi { + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + num-chipselects = <1>; + + mosi-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + cs-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; + sck-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; + + led_gpio: led_gpio@0 { + compatible = "fairchild,74hc595"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + registers-number = <2>; + spi-max-frequency = <1000000>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power_blue: power_blue { + gpios = <&led_gpio 0 GPIO_ACTIVE_HIGH>; + label = "rtl30vw:blue:power"; + default-state = "on"; + }; + + led_power_red: power_red { + gpios = <&led_gpio 1 GPIO_ACTIVE_HIGH>; + label = "rtl30vw:red:power"; + }; + + tp28 { + gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>; + label = "rtl30vw:ext:tp28"; + default-state = "keep"; + }; + + tp27 { + gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>; + label = "rtl30vw:ext:tp27"; + default-state = "keep"; + }; + + wlan2g { + gpios = <&led_gpio 8 GPIO_ACTIVE_HIGH>; + label = "rtl30vw:blue:wlan2g"; + linux,default-trigger = "phy0tpt"; + }; + + wlan5g { + gpios = <&led_gpio 9 GPIO_ACTIVE_HIGH>; + label = "rtl30vw:blue:wlan5g"; + linux,default-trigger = "phy1tpt"; + }; + + wps { + gpios = <&led_gpio 10 GPIO_ACTIVE_HIGH>; + label = "rtl30vw:blue:wps"; + }; + + voip { + gpios = <&led_gpio 11 GPIO_ACTIVE_HIGH>; + label = "rtl30vw:blue:voip"; + }; + + s1 { + gpios = <&led_gpio 12 GPIO_ACTIVE_HIGH>; + label = "rtl30vw:blue:s1"; + }; + + s2 { + gpios = <&led_gpio 13 GPIO_ACTIVE_HIGH>; + label = "rtl30vw:blue:s2"; + }; + + s3 { + gpios = <&led_gpio 14 GPIO_ACTIVE_HIGH>; + label = "rtl30vw:blue:s3"; + }; + + s4 { + gpios = <&led_gpio 15 GPIO_ACTIVE_HIGH>; + label = "rtl30vw:blue:s4"; + }; + + signal { + gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; + label = "rtl30vw:red:signal"; + }; + }; + + keys { + compatible = "gpio-keys"; + + wps { + label = "wps"; + linux,code = ; + gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; + }; + + reset { + label = "reset"; + linux,code = ; + gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; + }; + }; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + tcsr@194b000 { + /* select hostmode */ + compatible = "qcom,tcsr"; + reg = <0x194b000 0x100>; + qcom,usb-hsphy-mode-select = ; + status = "okay"; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + usb2@60f8800 { + status = "okay"; + }; + + usb3@8af8800 { + status = "okay"; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + }; + + edma@c080000 { + status = "okay"; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_spi1 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>; + + flash@0 { + /*"n25q128a11" is required for proper nand recognition in u-boot. */ + compatible = "jedec,spi-nor", "n25q128a11"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "0:SBL1"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "0:MIBIB"; + reg = <0x40000 0x20000>; + read-only; + }; + + partition@60000 { + label = "0:QSEE"; + reg = <0x60000 0x60000>; + read-only; + }; + + partition@c0000 { + label = "0:CDT"; + reg = <0xc0000 0x10000>; + read-only; + }; + + partition@d0000 { + label = "0:DDRPARAMS"; + reg = <0xd0000 0x10000>; + read-only; + }; + + partition@e0000 { + label = "0:APPSBLENV"; + reg = <0xe0000 0x10000>; + read-only; + }; + + partition@f0000 { + label = "0:APPSBL"; + reg = <0xf0000 0x80000>; + read-only; + }; + + partition@170000 { + label = "0:ART"; + reg = <0x170000 0x10000>; + read-only; + }; + + partition@180000 { + label = "0:BOOTCONFIG"; + reg = <0x180000 0x10000>; + read-only; + }; + }; + }; + + flash@1 { + /* + * Factory U-boot looks in 0:BOOTCONFIG partition for active + * partitions settings and mangle partition config. So kernel + * /kernel_1 and rootfs/rootfs_1 pairs can be swaped. + * It isn't a problem but we never can be sure where OFW put + * factory images. "spinand,mt29f" value is required for proper + * nand recognition in u-boot. + */ + compatible = "spi-nand","spinand,mt29f"; + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x0 0x400000>; + }; + + partition@400000 { + label = "rootfs"; + reg = <0x400000 0x2000000>; + }; + + partition@2400000 { + label = "kernel_1"; + reg = <0x2400000 0x400000>; + }; + + partition@2800000 { + label = "rootfs_1"; + reg = <0x2800000 0x2000000>; + }; + + partition@4800000 { + label = "ubifs"; + reg = <0x4800000 0x3800000>; + }; + }; + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&tlmm { + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pinmux { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <12>; + bias-disable; + }; + + pinmux_cs { + function = "gpio"; + pins = "gpio54", "gpio59"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; +}; + +&usb2_hs_phy { + status = "okay"; +}; + +&usb3_ss_phy { + status = "okay"; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "cellc,rtl30vw"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "cellc,rtl30vw"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019-32m.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019-32m.dts new file mode 100644 index 0000000000..63fbfb65c1 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019-32m.dts @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +/dts-v1/; + +#include "qcom-ipq4019-u4019.dtsi" +#include +#include + +/ { + model = "Unielec U4019 (32M)"; + compatible = "unielec,u4019-32m","unielec,u4019","qcom,ipq4019"; +}; + +&blsp1_spi1 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; + + flash@0 { + reg = <0>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <24000000>; + broken-flash-reset; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "0:SBL1"; + reg = <0x0 0x40000>; + read-only; + }; + partition@40000 { + label = "0:MIBIB"; + reg = <0x40000 0x20000>; + read-only; + }; + partition@60000 { + label = "0:QSEE"; + reg = <0x60000 0x60000>; + read-only; + }; + partition@c0000 { + label = "0:CDT"; + reg = <0xc0000 0x10000>; + read-only; + }; + partition@d0000 { + label = "0:DDRPARAMS"; + reg = <0xd0000 0x10000>; + read-only; + }; + partition@e0000 { + label = "0:APPSBLENV"; + reg = <0xe0000 0x10000>; + read-only; + }; + partition@f0000 { + label = "0:APPSBL"; + reg = <0xf0000 0x80000>; + read-only; + }; + partition@170000 { + label = "0:ART"; + reg = <0x170000 0x10000>; + read-only; + }; + partition@180000 { + compatible = "denx,fit"; + label = "firmware"; + reg = <0x180000 0x1e80000>; + }; + }; + }; +}; + diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi new file mode 100644 index 0000000000..c768e25ca0 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-u4019.dtsi @@ -0,0 +1,224 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + compatible = "unielec,u4019","qcom,ipq4019"; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; + reset-delay-us = <2000>; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + tcsr@194b000 { + compatible = "qcom,tcsr"; + reg = <0x194b000 0x100>; + qcom,usb-hsphy-mode-select = ; + status = "okay"; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + usb2@60f8800 { + status = "okay"; + + dwc3@6000000 { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + }; + }; + + usb3@8af8800 { + status = "okay"; + + dwc3@8a00000 { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + #trigger-source-cells = <0>; + }; + + port@2 { + reg = <2>; + #trigger-source-cells = <0>; + }; + }; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + }; + + edma@c080000 { + status = "okay"; + }; + + aliases { + led-boot = &led_status; + led-failsafe = &led_status; + led-running = &led_status; + led-upgrade = &led_status; + serial0 = &blsp1_uart1; + serial1 = &blsp1_uart2; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-0 = <&led_pins>; + pinctrl-names = "default"; + + led_status: led2 { + label = "u4019:green:led2"; + gpios = <&tlmm 68 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&blsp1_uart2 { + pinctrl-0 = <&serial_1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&qpic_bam { + status = "okay"; +}; + +&tlmm { + mdio_pins: mdio_pinmux { + mux_1 { + pins = "gpio6"; + function = "mdio"; + bias-pull-up; + }; + mux_2 { + pins = "gpio7"; + function = "mdc"; + bias-pull-up; + }; + }; + + serial_0_pins: serial0-pinmux { + mux { + pins = "gpio16", "gpio17"; + function = "blsp_uart0"; + bias-disable; + }; + }; + serial_1_pins: serial1_pinmux { + mux { + pins = "gpio8", "gpio9"; + function = "blsp_uart1"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pinmux { + function = "blsp_spi0"; + pins = "gpio13", "gpio14", "gpio15"; + drive-strength = <12>; + bias-disable; + }; + + pinmux_cs { + function = "gpio"; + pins = "gpio12"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + led_pins: led_pinmux { + mux { + function = "gpio"; + pins = "gpio68"; + bias-disabled; + output-low; + }; + }; +}; + +&usb3_ss_phy { + status = "okay"; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&usb2_hs_phy { + status = "okay"; +}; + +&wifi0 { + status = "okay"; +}; + +&wifi1 { + status = "okay"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts new file mode 100644 index 0000000000..3a0e0b8cfa --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts @@ -0,0 +1,375 @@ +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2019, Nguyen Dinh Phi + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + model = "Compex WPJ419"; + compatible = "compex,wpj419", "qcom,ipq4019"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; + }; + + reserved-memory { + ranges; + rsvd1@87000000 { + /* Reserved for other subsystem */ + reg = <0x87000000 0x500000>; + no-map; + }; + wifi_dump@87500000 { + reg = <0x87500000 0x600000>; + no-map; + }; + + rsvd2@87B00000 { + /* Reserved for other subsystem */ + reg = <0x87B00000 0x500000>; + no-map; + }; + }; + + chosen { + bootargs-append = " ubi.mtd=ubi root=/dev/ubiblock0_1 clk_ignore_unused"; + }; + + soc { + pinctrl@1000000 { + mdio_pins: mdio_pinmux { + mux_1 { + pins = "gpio6"; + function = "mdio"; + bias-pull-up; + }; + + mux_2 { + pins = "gpio7"; + function = "mdc"; + bias-pull-up; + }; + }; + + serial_0_pins: serial_pinmux { + mux { + pins = "gpio16", "gpio17"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + serial_1_pins: serial1_pinmux { + mux { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "blsp_uart1"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pinmux { + function = "blsp_spi0"; + pins = "gpio13", "gpio14", "gpio15"; + bias-disable; + }; + + pinmux_cs { + function = "gpio"; + pins = "gpio12"; + bias-disable; + output-high; + }; + }; + + i2c_0_pins: i2c_0_pinmux { + mux { + pins = "gpio20", "gpio21"; + function = "blsp_i2c0"; + bias-disable; + }; + }; + + nand_pins: nand_pins { + pullups { + pins = "gpio52", "gpio53", "gpio58", "gpio59"; + function = "qpic"; + bias-pull-up; + }; + + pulldowns { + pins = "gpio54", "gpio55", "gpio56", + "gpio57", "gpio60", "gpio61", + "gpio62", "gpio63", "gpio64", + "gpio65", "gpio66", "gpio67", + "gpio68", "gpio69"; + function = "qpic"; + bias-pull-down; + }; + }; + + led_0_pins: led0_pinmux { + mux_1 { + pins = "gpio36"; + function = "led0"; + bias-pull-down; + }; + mux_2 { + pins = "gpio40"; + function = "led4"; + bias-pull-down; + }; + }; + }; + + blsp_dma: dma@7884000 { + status = "okay"; + }; + + spi_0: spi@78b5000 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 41 GPIO_ACTIVE_HIGH>; + num-cs = <2>; + + flash0@0 { + reg = <0>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <24000000>; + broken-flash-reset; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "0:SBL1"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@40000 { + label = "0:MIBIB"; + reg = <0x040000 0x020000>; + read-only; + }; + + partition@60000 { + label = "0:QSEE"; + reg = <0x060000 0x060000>; + read-only; + }; + + partition@c0000 { + label = "0:CDT"; + reg = <0x0c0000 0x010000>; + read-only; + }; + + partition@d0000 { + label = "0:DDRPARAMS"; + reg = <0x0d0000 0x010000>; + read-only; + }; + + partition@e0000 { + label = "u-boot-env"; + reg = <0x0e0000 0x010000>; + }; + + partition@f0000 { + label = "u-boot"; + reg = <0x0f0000 0x080000>; + read-only; + }; + + partition@170000 { + label = "0:ART"; + reg = <0x170000 0x010000>; + read-only; + }; + }; + }; + + nand@1 { + reg = <1>; + status = "okay"; + compatible = "spi-nand"; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + /* The device has 128MB, but we can only address + * 64MB because of the bootloader's default settings. + * This is due to the old mt29f driver, + * which detected the deivce with only 64MB + */ + partition@0 { + label = "ubi"; + reg = <0x0000000 0x4000000>; + }; + }; + }; + }; + + mdio@90000 { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>; + reset-delay-us = <5000>; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@194b000 { + /* select hostmode */ + compatible = "qcom,tcsr"; + reg = <0x194b000 0x100>; + qcom,usb-hsphy-mode-select = ; + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + i2c_0: i2c@78b7000 { + pinctrl-0 = <&i2c_0_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + serial@78af000 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + serial@78b0000 { + pinctrl-0 = <&serial_1_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + + usb3_ss_phy: ssphy@9a000 { + status = "okay"; + }; + + usb3_hs_phy: hsphy@a6000 { + status = "okay"; + }; + + usb3: usb3@8af8800 { + status = "okay"; + }; + + usb2_hs_phy: hsphy@a8000 { + status = "okay"; + }; + + usb2: usb2@60f8800 { + status = "okay"; + }; + + cryptobam: dma@8e04000 { + status = "okay"; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + switch_lan_bmp = <0x1e>; + switch_wan_bmp = <0x20>; + status = "okay"; + }; + + edma@c080000 { + status = "okay"; + }; + + qpic_bam: dma@7984000 { + status = "okay"; + }; + + pcie0: pci@40000000 { + status = "okay"; + perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; + wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; + }; + + nand: qpic-nand@79b0000 { + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + status = "okay"; + }; + }; +}; + +&gmac0 { + qcom,phy_mdio_addr = <4>; + qcom,poll_required = <1>; + qcom,forced_speed = <1000>; + qcom,forced_duplex = <1>; + vlan_tag = <2 0x20>; +}; + +&gmac1 { + qcom,phy_mdio_addr = <3>; + qcom,poll_required = <1>; + qcom,forced_speed = <1000>; + qcom,forced_duplex = <1>; + vlan_tag = <1 0x10>; +}; + +&wifi0 { + status = "okay"; +}; + +&wifi1 { + status = "okay"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts new file mode 100644 index 0000000000..1bcf5e80bf --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts @@ -0,0 +1,288 @@ +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2017, Christian Mehlis + * Copyright (c) 2017-2018, Sven Eckelmann + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + model = "Compex WPJ428"; + compatible = "compex,wpj428"; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + reset-gpios = <&tlmm 59 GPIO_ACTIVE_LOW>; + reset-delay-us = <2000>; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@194b000 { + /* select hostmode */ + compatible = "qcom,tcsr"; + reg = <0x194b000 0x100>; + qcom,usb-hsphy-mode-select = ; + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + usb2: usb2@60f8800 { + status = "okay"; + }; + + usb3: usb3@8af8800 { + status = "okay"; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + switch_lan_bmp = <0x10>; + switch_wan_bmp = <0x20>; + + status = "okay"; + }; + + edma@c080000 { + status = "okay"; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + aliases { + led-boot = &status; + led-failsafe = &status; + led-upgrade = &status; + }; + + leds { + compatible = "gpio-leds"; + + status: rss4 { + label = "wpj428:green:rss4"; + gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; + }; + + rss3 { + label = "wpj428:green:rss3"; + gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; + }; + }; + + beeper: beeper { + compatible = "gpio-beeper"; + gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>; + }; +}; + +&tlmm { + mdio_pins: mdio_pinmux { + mux_1 { + pins = "gpio53"; + function = "mdio"; + bias-pull-up; + }; + + mux_2 { + pins = "gpio52"; + function = "mdc"; + bias-pull-up; + }; + }; + + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pin { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <12>; + bias-disable; + }; + pin_cs { + function = "gpio"; + pins = "gpio54"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_spi1 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; + + m25p80@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition0@0 { + label = "0:SBL1"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition1@40000 { + label = "0:MIBIB"; + reg = <0x00040000 0x00020000>; + read-only; + }; + partition2@60000 { + label = "0:QSEE"; + reg = <0x00060000 0x00060000>; + read-only; + }; + partition3@c0000 { + label = "0:CDT"; + reg = <0x000c0000 0x00010000>; + read-only; + }; + partition4@d0000 { + label = "0:DDRPARAMS"; + reg = <0x000d0000 0x00010000>; + read-only; + }; + partition5@e0000 { + label = "0:APPSBLENV"; /* uboot env*/ + reg = <0x000e0000 0x00010000>; + read-only; + }; + partition5@f0000 { + label = "0:APPSBL"; /* uboot */ + reg = <0x000f0000 0x00080000>; + read-only; + }; + partition5@170000 { + label = "0:ART"; + reg = <0x00170000 0x00010000>; + read-only; + }; + partition6@180000 { + compatible = "denx,fit"; + label = "firmware"; + reg = <0x00180000 0x01e80000>; + }; + }; + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&gmac0 { + qcom,phy_mdio_addr = <4>; + qcom,poll_required = <1>; + qcom,forced_speed = <1000>; + qcom,forced_duplex = <1>; + vlan_tag = <2 0x20>; +}; + +&gmac1 { + qcom,phy_mdio_addr = <3>; + qcom,poll_required = <1>; + qcom,forced_speed = <1000>; + qcom,forced_duplex = <1>; + vlan_tag = <1 0x10>; +}; + +&usb3_ss_phy { + status = "okay"; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&usb2_hs_phy { + status = "okay"; +}; + +&wifi0 { + status = "okay"; +}; + +&wifi1 { + status = "okay"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts new file mode 100644 index 0000000000..126d944ebb --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303.dts @@ -0,0 +1,180 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT + +#include "qcom-ipq4029-aruba-glenmorangie.dtsi" +#include + +/ { + model = "Aruba AP-303"; + compatible = "aruba,ap-303"; + + aliases { + led-boot = &led_system_green; + led-failsafe = &led_system_red; + led-running = &led_system_green; + led-upgrade = &led_system_red; + }; + + leds { + compatible = "gpio-leds"; + + wifi_green { + label = "ap-303:green:wifi"; + gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tpt"; + }; + + wifi_amber { + label = "ap-303:amber:wifi"; + gpios = <&tlmm 40 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy1tpt"; + }; + + led_system_red: system_red { + label = "ap-303:red:system"; + gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>; + }; + + led_system_green: system_green { + label = "ap-303:green:system"; + gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&tlmm { + /* + * In addition to the Pins listed below, + * the following GPIOs have "features": + * 54 - out - active low to force HW reset + * 41 - out - active low to reset TPM + * 43 - out - active low to reset BLE radio + * 19 - in - active high when DC powered + */ + + phy-reset { + line-name = "PHY-reset"; + gpios = <42 GPIO_ACTIVE_HIGH>; + gpio-hog; + output-high; + }; +}; + +&blsp1_spi1 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + /* + * There is no partition map for the NOR flash + * in the stock firmware. + * + * All partitions here are based on offsets + * found in the U-Boot GPL code and information + * from smem. + */ + + partition@0 { + label = "sbl1"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "mibib"; + reg = <0x40000 0x20000>; + read-only; + }; + + partition@60000 { + label = "qsee"; + reg = <0x60000 0x60000>; + read-only; + }; + + partition@c0000 { + label = "cdt"; + reg = <0xc0000 0x10000>; + read-only; + }; + + partition@d0000 { + label = "ddrparams"; + reg = <0xd0000 0x10000>; + read-only; + }; + + partition@e0000 { + label = "ART"; + reg = <0xe0000 0x10000>; + read-only; + }; + + partition@f0000 { + label = "appsbl"; + reg = <0xf0000 0xf0000>; + read-only; + }; + + partition@1e0000 { + label = "mfginfo"; + reg = <0x1e0000 0x10000>; + read-only; + }; + + partition@1f0000 { + label = "apcd"; + reg = <0x1f0000 0x10000>; + read-only; + }; + + partition@200000 { + label = "osss"; + reg = <0x200000 0x180000>; + read-only; + }; + + partition@380000 { + /* This is empty */ + label = "appsblenv"; + reg = <0x380000 0x10000>; + read-only; + }; + + partition@390000 { + label = "pds"; + reg = <0x390000 0x10000>; + read-only; + }; + + partition@3a0000 { + label = "fcache"; + reg = <0x3a0000 0x10000>; + read-only; + }; + + partition@3b0000 { + /* Called osss1 in smem */ + label = "u-boot-env-bak"; + reg = <0x3b0000 0x10000>; + read-only; + }; + + partition@3f0000 { + label = "u-boot-env"; + reg = <0x3f0000 0x10000>; + read-only; + }; + }; + }; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts new file mode 100644 index 0000000000..1f7a728492 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-303h.dts @@ -0,0 +1,421 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + model = "Aruba AP-303H"; + compatible = "aruba,ap-303h"; + + aliases { + led-boot = &led_system_green; + led-failsafe = &led_system_red; + led-running = &led_system_green; + led-upgrade = &led_system_amber; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; + }; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + + reset-gpios = <&tlmm 19 GPIO_ACTIVE_LOW>; + reset-delay-us = <2000>; + }; + + counter@4a1000 { + compatible = "qcom,qca-gcnt"; + reg = <0x4a1000 0x4>; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + tcsr@194b000 { + compatible = "qcom,tcsr"; + reg = <0x194b000 0x100>; + qcom,usb-hsphy-mode-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + usb2@60f8800 { + status = "okay"; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + }; + + edma@c080000 { + status = "okay"; + }; + + i2c_0: i2c@78b7000 { + pinctrl-0 = <&i2c_0_pins>; + pinctrl-names = "default"; + status = "okay"; + + tpm@29 { + /* No Driver */ + compatible = "atmel,at97sc3203"; + reg = <0x29>; + read-only; + }; + + power-monitor@40 { + /* No driver */ + compatible = "isl,isl28022"; + reg = <0x40>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + wifi_green { + label = "ap-303h:green:wifi"; + gpios = <&tlmm 27 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tpt"; + }; + + wifi_amber { + label = "ap-303h:amber:wifi"; + gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy1tpt"; + }; + + pse { + label = "ap-303h:green:pse"; + gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>; + }; + + led_system_red: system_red { + label = "ap-303h:red:system"; + gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>; + }; + + led_system_green: system_green { + label = "ap-303h:green:system"; + gpios = <&tlmm 24 GPIO_ACTIVE_HIGH>; + }; + + led_system_amber: system_amber { + label = "ap-303h:amber:system"; + gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "Reset button"; + gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&blsp1_uart2 { + /* Texas Instruments CC2540T BLE radio */ + pinctrl-0 = <&serial_1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&qpic_bam { + status = "okay"; +}; + +&tlmm { + /* + * In addition to the Pins listed below, + * the following GPIOs have "features": + * 39 - out - active low to force HW reset + * 32 - out - active low to reset TPM + * 43 - out - active low to reset BLE radio + * 41 - out - pulse to set warm reset status + * 34 - out - active low to enable PSE port + * 22 - in - active low when 802.3at powered + * 29 - in - active high when DC powered + * 40 - in - active low when reset due to cold HW reset + * 30 - in - active low when USB overcurrent detected + * 35 - in - interrupt line for power monitor chip + * 31 - in - active low when PSE port active + */ + mdio_pins: mdio_pinmux { + mux_1 { + pins = "gpio6"; + function = "mdio"; + bias-pull-up; + }; + mux_2 { + pins = "gpio7"; + function = "mdc"; + bias-pull-up; + }; + }; + + spi_0_pins: spi_0_pinmux { + pin { + function = "blsp_spi0"; + pins = "gpio13", "gpio14", "gpio15"; + drive-strength = <12>; + bias-disable; + }; + pin_cs { + function = "gpio"; + pins = "gpio12", "gpio59"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + i2c_0_pins: i2c_0_pinmux { + mux { + pins = "gpio20", "gpio21"; + function = "blsp_i2c0"; + drive-strength = <4>; + bias-disable; + }; + }; + + serial_0_pins: serial_0_pinmux { + mux { + pins = "gpio16", "gpio17"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + serial_1_pins: serial_1_pinmux { + mux { + pins = "gpio8", "gpio9"; + function = "blsp_uart1"; + bias-disable; + }; + }; + + usb-power { + line-name = "USB-power"; + gpios = <23 GPIO_ACTIVE_HIGH>; + gpio-hog; + output-high; + }; +}; + +&blsp1_spi1 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + /* + * There is no partition map for the NOR flash + * in the stock firmware. + * + * All partitions here are based on offsets + * found in the U-Boot GPL code and information + * from smem. + */ + + partition@0 { + label = "sbl1"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "mibib"; + reg = <0x40000 0x20000>; + read-only; + }; + + partition@60000 { + label = "qsee"; + reg = <0x60000 0x60000>; + read-only; + }; + + partition@c0000 { + label = "cdt"; + reg = <0xc0000 0x10000>; + read-only; + }; + + partition@d0000 { + label = "ddrparams"; + reg = <0xd0000 0x10000>; + read-only; + }; + + partition@e0000 { + label = "appsblenv"; + reg = <0xe0000 0x10000>; + read-only; + }; + + partition@f0000 { + label = "appsbl"; + reg = <0xf0000 0x100000>; + read-only; + }; + + partition@1e0000 { + label = "ART"; + reg = <0x1f0000 0x10000>; + read-only; + }; + + partition@1f0000 { + label = "osss"; + reg = <0x200000 0x170000>; + read-only; + }; + + partition@200000 { + label = "pds"; + reg = <0x370000 0x10000>; + read-only; + }; + + partition@380000 { + label = "apcd"; + reg = <0x380000 0x10000>; + read-only; + }; + + partition@390000 { + label = "mfginfo"; + reg = <0x390000 0x10000>; + read-only; + }; + + partition@3a0000 { + label = "fcache"; + reg = <0x3a0000 0x10000>; + read-only; + }; + + partition@3b0000 { + /* Called osss1 in smem */ + label = "u-boot-env-bak"; + reg = <0x3b0000 0x10000>; + read-only; + }; + + partition@3f0000 { + label = "u-boot-env"; + reg = <0x3c0000 0x40000>; + read-only; + }; + }; + }; + + flash@1 { + status = "okay"; + + compatible = "spi-nand"; + reg = <1>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + /* 'aos0' in Aruba firmware */ + label = "aos0"; + reg = <0x0 0x2000000>; + read-only; + }; + + partition@2000000 { + /* 'aos1' in Aruba firmware */ + label = "ubi"; + reg = <0x2000000 0x2000000>; + }; + + partition@4000000 { + label = "aruba-ubifs"; + reg = <0x4000000 0x4000000>; + read-only; + }; + }; + }; +}; + +&usb2_hs_phy { + status = "okay"; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "Aruba-AP-303"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "Aruba-AP-303"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts new file mode 100644 index 0000000000..07bb674520 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ap-365.dts @@ -0,0 +1,193 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT + +#include "qcom-ipq4029-aruba-glenmorangie.dtsi" +#include + +/ { + model = "Aruba AP-365"; + compatible = "aruba,ap-365"; + + aliases { + led-boot = &led_system_green; + led-failsafe = &led_system_red; + led-running = &led_system_green; + led-upgrade = &led_system_red; + }; + + leds { + compatible = "gpio-leds"; + + led_system_red: system_red { + label = "ap-365:red:system"; + gpios = <&tlmm 46 GPIO_ACTIVE_LOW>; + }; + + led_system_green: system_green { + label = "ap-365:green:system"; + gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; + }; + + system_amber { + label = "ap-365:amber:system"; + gpios = <&tlmm 49 GPIO_ACTIVE_LOW>; + }; + }; + + watchdog { + compatible = "linux,wdt-gpio"; + gpios = <&tlmm 41 GPIO_ACTIVE_LOW>; + hw_algo = "toggle"; + hw_margin_ms = <1000>; + always-running; + }; +}; + +&tlmm { + /* + * In addition to the Pins listed below, + * the following GPIOs have "features": + * 39 - out - pulse low to reset watchdog status flipflop + * 40 - out - active high to enable watchdog + * 41 - out - watchdog poke + * 42 - out - active low to reset BLE radio + * 43 - out - active low to reset TPM + * 47 - out - pulse low to reset warm reset status + * 54 - out - active low to force HW reset + * 18 - in - PHY interrupt line + * 45 - in - power monitor interrupt + * 48 - in - active low when cold reset + * 52 - in - active high when watchdog reset + */ + + phy-reset { + line-name = "PHY-reset"; + gpios = <42 GPIO_ACTIVE_HIGH>; + gpio-hog; + output-high; + }; +}; + +&i2c_0 { + power-monitor@40 { + /* No driver */ + compatible = "isl,isl28022"; + reg = <0x40>; + }; + + temperature-sensor@48 { + compatible = "adi,ad7416"; + reg = <0x48>; + }; +}; + +&blsp1_spi1 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + /* + * There is no partition map for the NOR flash + * in the stock firmware. + * + * All partitions here are based on offsets + * found in the U-Boot GPL code and information + * from smem. + */ + + partition@0 { + label = "sbl1"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "mibib"; + reg = <0x40000 0x20000>; + read-only; + }; + + partition@60000 { + label = "qsee"; + reg = <0x60000 0x60000>; + read-only; + }; + + partition@c0000 { + label = "cdt"; + reg = <0xc0000 0x10000>; + read-only; + }; + + partition@d0000 { + label = "ddrparams"; + reg = <0xd0000 0x10000>; + read-only; + }; + + partition@e0000 { + label = "u-boot-env"; + reg = <0xe0000 0x10000>; + read-only; + }; + + partition@f0000 { + label = "appsbl"; + reg = <0xf0000 0x100000>; + read-only; + }; + + partition@1f0000 { + label = "ART"; + reg = <0x1f0000 0x10000>; + read-only; + }; + + partition@200000 { + label = "osss"; + reg = <0x200000 0x170000>; + read-only; + }; + + partition@370000 { + label = "pds"; + reg = <0x370000 0x10000>; + read-only; + }; + + partition@380000 { + label = "apcd"; + reg = <0x380000 0x10000>; + read-only; + }; + + partition@390000 { + label = "mfginfo"; + reg = <0x390000 0x10000>; + read-only; + }; + + partition@3a0000 { + label = "fcache"; + reg = <0x3a0000 0x10000>; + read-only; + }; + + partition@3b0000 { + label = "osss1"; + reg = <0x3b0000 0x50000>; + read-only; + }; + }; + }; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi new file mode 100644 index 0000000000..4d1d82a272 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-aruba-glenmorangie.dtsi @@ -0,0 +1,249 @@ +// SPDX-License-Identifier: GPL-2.0 OR MIT + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; + }; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + + /delete-node/ ethernet-phy@0; + /delete-node/ ethernet-phy@2; + /delete-node/ ethernet-phy@3; + /delete-node/ ethernet-phy@4; + + ethernet-phy@5 { + reg = <0x5>; + }; + }; + + counter@4a1000 { + compatible = "qcom,qca-gcnt"; + reg = <0x4a1000 0x4>; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */ + switch_lan_bmp = <0x0>; /* lan port bitmap */ + switch_wan_bmp = <0x10>; /* wan port bitmap */ + }; + + edma@c080000 { + qcom,single-phy; + qcom,num_gmac = <1>; + phy-mode = "rgmii-id"; + status = "okay"; + }; + + i2c_0: i2c@78b7000 { + pinctrl-0 = <&i2c_0_pins>; + pinctrl-names = "default"; + status = "okay"; + + tpm@29 { + /* No Driver */ + compatible = "atmel,at97sc3203"; + reg = <0x29>; + read-only; + }; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "Reset button"; + gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_uart1 { + /* Texas Instruments CC2540T BLE radio */ + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&blsp1_uart2 { + pinctrl-0 = <&serial_1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&gmac0 { + qcom,phy_mdio_addr = <5>; + qcom,poll_required = <1>; + vlan_tag = <0 0x20>; +}; + +&qpic_bam { + status = "okay"; +}; + +&tlmm { + mdio_pins: mdio_pinmux { + mux_1 { + pins = "gpio6"; + function = "mdio"; + bias-pull-up; + }; + mux_2 { + pins = "gpio7"; + function = "mdc"; + bias-pull-up; + }; + }; + + nand_pins: nand_pins { + pullups { + pins = "gpio53", "gpio58", "gpio59"; + function = "qpic"; + bias-pull-up; + }; + + pulldowns { + pins = "gpio54", "gpio55", "gpio56", + "gpio57", "gpio60", "gpio61", + "gpio62", "gpio63", "gpio64", + "gpio65", "gpio66", "gpio67", + "gpio68", "gpio69"; + function = "qpic"; + bias-pull-down; + }; + }; + + spi_0_pins: spi_0_pinmux { + pin { + function = "blsp_spi0"; + pins = "gpio13", "gpio14", "gpio15"; + drive-strength = <12>; + bias-disable; + }; + pin_cs { + function = "gpio"; + pins = "gpio12"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + i2c_0_pins: i2c_0_pinmux { + mux { + pins = "gpio10", "gpio11"; + function = "blsp_i2c0"; + drive-strength = <4>; + bias-disable; + }; + }; + + serial_0_pins: serial_0_pinmux { + mux { + pins = "gpio16", "gpio17"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + serial_1_pins: serial_1_pinmux { + mux { + pins = "gpio8", "gpio9"; + function = "blsp_uart1"; + bias-disable; + }; + }; +}; + +&nand { + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + status = "okay"; + + nand@0 { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + /* 'aos0' in Aruba firmware */ + label = "aos0"; + reg = <0x0 0x2000000>; + read-only; + }; + + partition@2000000 { + /* 'aos1' in Aruba firmware */ + label = "ubi"; + reg = <0x2000000 0x2000000>; + }; + + partition@4000000 { + label = "aruba-ubifs"; + reg = <0x4000000 0x4000000>; + read-only; + }; + }; + }; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "Aruba-AP-303"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "Aruba-AP-303"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts new file mode 100644 index 0000000000..b32eb29f8c --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts @@ -0,0 +1,280 @@ +/* Copyright (c) 2015, The Linux Foundation. All rights reserved. + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + model = "GL.iNet GL-B1300"; + compatible = "glinet,gl-b1300"; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + led-upgrade = &power; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; + }; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + tcsr@194b000 { + /* select hostmode */ + compatible = "qcom,tcsr"; + reg = <0x194b000 0x100>; + qcom,usb-hsphy-mode-select = ; + status = "okay"; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + usb2@60f8800 { + status = "okay"; + }; + + usb3@8af8800 { + status = "okay"; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + switch_lan_bmp = <0x18>; + switch_wan_bmp = <0x20>; + }; + + edma@c080000 { + status = "okay"; + }; + }; + + keys { + compatible = "gpio-keys"; + + wps { + label = "wps"; + gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + reset { + label = "reset"; + gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + power: power { + label = "gl-b1300:green:power"; + gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + mesh { + label = "gl-b1300:green:mesh"; + gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; + }; + + wlan { + label = "gl-b1300:green:wlan"; + gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&blsp1_spi1 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>; + + mx25l25635f@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + SBL1@0 { + label = "SBL1"; + reg = <0x0 0x40000>; + read-only; + }; + + MIBIB@40000 { + label = "MIBIB"; + reg = <0x40000 0x20000>; + read-only; + }; + + QSEE@60000 { + label = "QSEE"; + reg = <0x60000 0x60000>; + read-only; + }; + + CDT@c0000 { + label = "CDT"; + reg = <0xc0000 0x10000>; + read-only; + }; + + DDRPARAMS@d0000 { + label = "DDRPARAMS"; + reg = <0xd0000 0x10000>; + read-only; + }; + + APPSBLENV@e0000 { + label = "APPSBLENV"; + reg = <0xe0000 0x10000>; + read-only; + }; + + APPSBL@f0000 { + label = "APPSBL"; + reg = <0xf0000 0x80000>; + read-only; + }; + + ART@170000 { + label = "ART"; + reg = <0x170000 0x10000>; + read-only; + }; + + firmware@180000 { + compatible = "denx,fit"; + label = "firmware"; + reg = <0x180000 0x1e80000>; + }; + }; + }; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&tlmm { + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi_0_pins: spi_0_pinmux { + pinmux { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + }; + pinmux_cs { + function = "gpio"; + pins = "gpio54"; + }; + pinconf { + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <12>; + bias-disable; + }; + pinconf_cs { + pins = "gpio54"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; +}; + +&usb2_hs_phy { + status = "okay"; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&usb3_ss_phy { + status = "okay"; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "GL-B1300"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "GL-B1300"; +}; diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-mr33.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-mr33.dts new file mode 100644 index 0000000000..5003572420 --- /dev/null +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-mr33.dts @@ -0,0 +1,400 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Device Tree Source for Meraki MR33 (Stinkbug) + * + * Copyright (C) 2017 Chris Blake + * Copyright (C) 2017 Christian Lamparter + * + * Based on Cisco Meraki DTS from GPL release r25-linux-3.14-20170427 + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + model = "Meraki MR33 Access Point"; + compatible = "meraki,mr33"; + + aliases { + led-boot = &status_green; + led-failsafe = &status_red; + led-running = &status_green; + led-upgrade = &power_orange; + }; + + /* Do we really need this defined? */ + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; + }; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + }; + + /* It is a 56-bit counter that supplies the count to the ARM arch + timers and without upstream driver */ + counter@4a1000 { + compatible = "qcom,qca-gcnt"; + reg = <0x4a1000 0x4>; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + serial@78b0000 { + pinctrl-0 = <&serial_1_pins>; + pinctrl-names = "default"; + status = "okay"; + + bluetooth { + compatible = "ti,cc2650"; + enable-gpios = <&tlmm 12 GPIO_ACTIVE_LOW>; + }; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */ + switch_lan_bmp = <0x0>; /* lan port bitmap */ + switch_wan_bmp = <0x10>; /* wan port bitmap */ + }; + + edma@c080000 { + qcom,single-phy; + qcom,num_gmac = <1>; + phy-mode = "rgmii-rxid"; + status = "okay"; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + power_orange: power { + label = "mr33:orange:power"; + gpios = <&tlmm 49 GPIO_ACTIVE_LOW>; + panic-indicator; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_uart1 { + pinctrl-0 = <&serial_0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&cryptobam { + status = "okay"; +}; + +&gmac0 { + qcom,phy_mdio_addr = <1>; + qcom,poll_required = <1>; + vlan_tag = <0 0x20>; +}; + +&blsp1_i2c3 { + pinctrl-0 = <&i2c_0_pins>; + pinctrl-names = "default"; + status = "okay"; + at24@50 { + compatible = "atmel,24c64"; + pagesize = <32>; + reg = <0x50>; + read-only; /* This holds our MAC & Meraki board-data */ + }; +}; + +&blsp1_i2c4 { + pinctrl-0 = <&i2c_1_pins>; + pinctrl-names = "default"; + status = "okay"; + + led-controller@30 { + compatible = "ti,lp5562"; + reg = <0x30>; + clock-mode = /bits/8 <2>; + enable-gpio = <&tlmm 48 GPIO_ACTIVE_HIGH>; + + /* RGB led */ + status_red: chan0 { + chan-name = "mr33:red:status"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + }; + + status_green: chan1 { + chan-name = "mr33:green:status"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + }; + + chan2 { + chan-name = "mr33:blue:status"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + }; + + chan3 { + chan-name = "mr33:white:status"; + led-cur = /bits/ 8 <0x20>; + max-cur = /bits/ 8 <0x60>; + }; + }; +}; + +&nand { + pinctrl-0 = <&nand_pins>; + pinctrl-names = "default"; + status = "okay"; + + nand@0 { + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "sbl1"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@100000 { + label = "mibib"; + reg = <0x00100000 0x00100000>; + read-only; + }; + partition@200000 { + label = "bootconfig"; + reg = <0x00200000 0x00100000>; + read-only; + }; + partition@300000 { + label = "qsee"; + reg = <0x00300000 0x00100000>; + read-only; + }; + partition@400000 { + label = "qsee_alt"; + reg = <0x00400000 0x00100000>; + read-only; + }; + partition@500000 { + label = "cdt"; + reg = <0x00500000 0x00080000>; + read-only; + }; + partition@580000 { + label = "cdt_alt"; + reg = <0x00580000 0x00080000>; + read-only; + }; + partition@600000 { + label = "ddrparams"; + reg = <0x00600000 0x00080000>; + read-only; + }; + partition@700000 { + label = "u-boot"; + reg = <0x00700000 0x00200000>; + read-only; + }; + partition@900000 { + label = "u-boot-backup"; + reg = <0x00900000 0x00200000>; + read-only; + }; + partition@b00000 { + label = "ART"; + reg = <0x00b00000 0x00080000>; + read-only; + }; + partition@c00000 { + label = "ubi"; + reg = <0x00c00000 0x07000000>; + /* + * Do not try to allocate the remaining + * 4 MiB to this ubi partition. It will + * confuse the u-boot and it might not + * find the kernel partition anymore. + */ + }; + }; + }; +}; + +&pcie0 { + status = "okay"; + perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>; + wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>; + + bridge@0,0 { + reg = <0x00000000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + wifi2: wifi@1,0 { + compatible = "qcom,ath10k"; + status = "okay"; + reg = <0x00010000 0 0 0 0>; + }; + }; +}; + +&qpic_bam { + status = "okay"; +}; + +&tlmm { + /* + * GPIO43 should be 0/1 whenever the unit is + * powered through PoE or AC-Adapter. + * That said, playing with this seems to + * reset the AP. + */ + + mdio_pins: mdio_pinmux { + mux_1 { + pins = "gpio6"; + function = "mdio"; + bias-pull-up; + }; + mux_2 { + pins = "gpio7"; + function = "mdc"; + bias-pull-up; + }; + }; + + serial_0_pins: serial_pinmux { + mux { + pins = "gpio16", "gpio17"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + serial_1_pins: serial1_pinmux { + mux { + /* We use the i2c-0 pins for serial_1 */ + pins = "gpio8", "gpio9"; + function = "blsp_uart1"; + bias-disable; + }; + }; + + i2c_0_pins: i2c_0_pinmux { + pinmux { + function = "blsp_i2c0"; + pins = "gpio20", "gpio21"; + }; + pinconf { + pins = "gpio20", "gpio21"; + drive-strength = <16>; + bias-disable; + }; + }; + + i2c_1_pins: i2c_1_pinmux { + pinmux { + function = "blsp_i2c1"; + pins = "gpio34", "gpio35"; + }; + pinconf { + pins = "gpio34", "gpio35"; + drive-strength = <16>; + bias-disable; + }; + }; + + nand_pins: nand_pins { + /* + * There are 18 pins. 15 pins are common between LCD and NAND. + * The QPIC controller arbitrates between LCD and NAND. Of the + * remaining 4, 2 are for NAND and 2 are for LCD exclusively. + * + * The meraki source hints that the bluetooth module claims + * pin 52 as well. But sadly, there's no data whenever this + * is a NAND or LCD exclusive pin or not. + */ + + pullups { + pins = "gpio52", "gpio53", "gpio58", + "gpio59"; + function = "qpic"; + bias-pull-up; + }; + + pulldowns { + pins = "gpio54", "gpio55", "gpio56", + "gpio57", "gpio60", "gpio61", + "gpio62", "gpio63", "gpio64", + "gpio65", "gpio66", "gpio67", + "gpio68", "gpio69"; + function = "qpic"; + bias-pull-down; + }; + }; +}; + +&wifi0 { + status = "okay"; + qcom,ath10k-calibration-variant = "Meraki-MR33"; +}; + +&wifi1 { + status = "okay"; + qcom,ath10k-calibration-variant = "Meraki-MR33"; +};