From: David Bauer Date: Fri, 30 Aug 2019 18:11:45 +0000 (+0200) Subject: ramips: use phy trigger for various Netgear boards X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=fa46c9b208fe3833f085e9f6ddf7c492b16f6c34;p=openwrt%2Fstaging%2Fjogo.git ramips: use phy trigger for various Netgear boards This commit switches the default trigger for the WiFi LED from a netdev trigger on "wlan0" to a wireless-phy based trigger. THis allows the LED to work, even when the wireless interface is not named "wlan0" without modifiying the LED settings. Signed-off-by: David Bauer --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index e54300dafb..6735876651 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -296,7 +296,6 @@ netgear,r6220|\ netgear,r6350|\ netgear,wndr3700-v5) ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10" - set_wifi_led "$boardname:green:wifi" ;; omnima,hpm) ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0" diff --git a/target/linux/ramips/dts/mt7621_netgear_r6220.dtsi b/target/linux/ramips/dts/mt7621_netgear_r6220.dtsi index 1874850111..17000a5bf2 100644 --- a/target/linux/ramips/dts/mt7621_netgear_r6220.dtsi +++ b/target/linux/ramips/dts/mt7621_netgear_r6220.dtsi @@ -39,6 +39,7 @@ led_wifi: wifi { gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; }; led_wps: wps { diff --git a/target/linux/ramips/dts/mt7621_netgear_r6350.dts b/target/linux/ramips/dts/mt7621_netgear_r6350.dts index 403fc91d54..a5c3a1907c 100644 --- a/target/linux/ramips/dts/mt7621_netgear_r6350.dts +++ b/target/linux/ramips/dts/mt7621_netgear_r6350.dts @@ -44,6 +44,7 @@ wifi { label = "r6350:green:wifi"; gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; }; };