From: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date: Wed, 7 Mar 2007 14:32:01 +0000 (+0100)
Subject: fixed ethernet phy configuration for plu405 board
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f9fc6a5852a6335840882fa2111925010eea1abe;p=project%2Fbcm63xx%2Fu-boot.git

fixed ethernet phy configuration for plu405 board

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
---

diff --git a/board/esd/plu405/plu405.c b/board/esd/plu405/plu405.c
index 37b92fb65a..59171f8f4c 100644
--- a/board/esd/plu405/plu405.c
+++ b/board/esd/plu405/plu405.c
@@ -215,12 +215,6 @@ int checkboard (void)
 	}
 
 	putc ('\n');
-
-	/*
-	 * Disable sleep mode in LXT971
-	 */
-	lxt971_no_sleep();
-
 	return 0;
 }
 
@@ -292,3 +286,14 @@ void board_auto_update_show(int au_active)
 	}
 }
 #endif
+
+void reset_phy(void)
+{
+#ifdef CONFIG_LXT971_NO_SLEEP
+
+	/*
+	 * Disable sleep mode in LXT971
+	 */
+	lxt971_no_sleep();
+#endif
+}
diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h
index dd5d831680..d02c39b28f 100644
--- a/include/configs/PLU405.h
+++ b/include/configs/PLU405.h
@@ -51,17 +51,13 @@
 
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
-#if 0 /* test-only */
 #define CONFIG_NET_MULTI	1
+#undef  CONFIG_HAS_ETH1
 
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		0	/* PHY address			*/
-#define CONFIG_PHY1_ADDR	1	/* PHY address			*/
-#else
-#define CONFIG_MII		1	/* MII PHY management		*/
-#define CONFIG_PHY_ADDR		0	/* PHY address			*/
-#endif
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
+#define CONFIG_RESET_PHY_R      1       /* use reset_phy() to disable phy sleep mode */
 
 #define CONFIG_PHY_CLK_FREQ	EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/