From: Peter Denison Date: Thu, 21 Jun 2007 21:51:07 +0000 (+0000) Subject: Extra bits from wireless-dev for the mac80211 stack - should just be additions X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f9bf3a0e4fc3503c95a6ad605cdf85d192e4eb62;p=openwrt%2Fstaging%2Fjow.git Extra bits from wireless-dev for the mac80211 stack - should just be additions SVN-Revision: 7695 --- diff --git a/target/linux/generic-2.6/patches-2.6.22/210-mac80211_include_wireless_dev.patch b/target/linux/generic-2.6/patches-2.6.22/210-mac80211_include_wireless_dev.patch new file mode 100644 index 0000000000..c7f3fd54d0 --- /dev/null +++ b/target/linux/generic-2.6/patches-2.6.22/210-mac80211_include_wireless_dev.patch @@ -0,0 +1,801 @@ +Index: linux-2.6.22-rc4/include/linux/ieee80211.h +=================================================================== +--- linux-2.6.22-rc4.orig/include/linux/ieee80211.h 2007-06-10 21:32:10.000000000 +0100 ++++ linux-2.6.22-rc4/include/linux/ieee80211.h 2007-06-10 21:33:26.000000000 +0100 +@@ -106,6 +106,69 @@ + } __attribute__ ((packed)); + + ++struct ieee80211_ht_capability { ++ __le16 capabilities_info; ++ u8 mac_ht_params_info; ++ u8 supported_mcs_set[16]; ++ __le16 extended_ht_capability_info; ++ __le32 tx_BF_capability_info; ++ u8 antenna_selection_info; ++}__attribute__ ((packed)); ++ ++struct ieee80211_ht_additional_info { ++ u8 control_chan; ++ u8 ht_param; ++ __le16 operation_mode; ++ __le16 stbc_param; ++ u8 basic_set[16]; ++}__attribute__ ((packed)); ++ ++ ++#define IEEE80211_TSINFO_TYPE(a) ((a.short1 & 0x0001) >> 0) ++#define IEEE80211_TSINFO_TSID(a) ((a.short1 & 0x001E) >> 1) ++#define IEEE80211_TSINFO_DIR(a) ((a.short1 & 0x0060) >> 5) ++#define IEEE80211_TSINFO_POLICY(a) ((a.short1 & 0x0180) >> 7) ++#define IEEE80211_TSINFO_AGG(a) ((a.short1 & 0x0200) >> 9) ++#define IEEE80211_TSINFO_APSD(a) ((a.short1 & 0x0400) >> 10) ++#define IEEE80211_TSINFO_UP(a) ((a.short1 & 0x3800) >> 11) ++#define IEEE80211_TSINFO_ACK(a) ((a.short1 & 0xC000) >> 14) ++#define IEEE80211_TSINFO_SCHEDULE(a) ((a.byte3 & 0x01) >> 0) ++ ++#define SET_TSINFO_TYPE(i, d) (i.short1 |= (d << 0) & 0x0001) ++#define SET_TSINFO_TSID(i, d) (i.short1 |= (d << 1) & 0x001E) ++#define SET_TSINFO_DIR(i, d) (i.short1 |= (d << 5) & 0x0060) ++#define SET_TSINFO_POLICY(i, d) (i.short1 |= (d << 7) & 0x0180) ++#define SET_TSINFO_AGG(i, d) (i.short1 |= (d << 9) & 0x0200) ++#define SET_TSINFO_APSD(i, d) (i.short1 |= (d << 10) & 0x0400) ++#define SET_TSINFO_UP(i, d) (i.short1 |= (d << 11) & 0x3800) ++#define SET_TSINFO_ACK(i, d) (i.short1 |= (d << 14) & 0xC000) ++#define SET_TSINFO_SCHEDULE(i, d) (i.byte3 |= (d << 0) & 0x01) ++ ++struct ieee80211_ts_info { ++ __le16 short1; ++ u8 byte3; ++} __attribute__ ((packed)); ++ ++struct ieee80211_elem_tspec { ++ struct ieee80211_ts_info ts_info; ++ __le16 nominal_msdu_size; ++ __le16 max_msdu_size; ++ __le32 min_service_interval; ++ __le32 max_service_interval; ++ __le32 inactivity_interval; ++ __le32 suspension_interval; ++ __le32 service_start_time; ++ __le32 min_data_rate; ++ __le32 mean_data_rate; ++ __le32 peak_data_rate; ++ __le32 burst_size; ++ __le32 delay_bound; ++ __le32 min_phy_rate; ++ __le16 surplus_band_allow; ++ __le16 medium_time; ++} __attribute__ ((packed)); ++ ++ + struct ieee80211_mgmt { + __le16 frame_control; + __le16 duration; +@@ -173,9 +236,51 @@ + struct { + u8 action_code; + u8 dialog_token; ++ u8 variable[0]; ++ } __attribute__ ((packed)) addts_req; ++ struct { ++ u8 action_code; ++ u8 dialog_token; ++ __le16 status_code; ++ u8 variable[0]; ++ } __attribute__ ((packed)) addts_resp; ++ struct { ++ u8 action_code; ++ struct ieee80211_ts_info ts_info; ++ __le16 reason_code; ++ } __attribute__ ((packed)) delts; ++ struct { ++ u8 action_code; ++ u8 dialog_token; + u8 status_code; + u8 variable[0]; + } __attribute__ ((packed)) wme_action; ++ struct { ++ u8 action_code; ++ u8 dest[6]; ++ u8 src[6]; ++ __le16 capab_info; ++ __le16 timeout; ++ /* Followed by Supported Rates and ++ * Extended Supported Rates */ ++ u8 variable[0]; ++ } __attribute__ ((packed)) dls_req; ++ struct { ++ u8 action_code; ++ __le16 status_code; ++ u8 dest[6]; ++ u8 src[6]; ++ /* Followed by Capability Information, ++ * Supported Rates and Extended ++ * Supported Rates */ ++ u8 variable[0]; ++ } __attribute__ ((packed)) dls_resp; ++ struct { ++ u8 action_code; ++ u8 dest[6]; ++ u8 src[6]; ++ __le16 reason_code; ++ } __attribute__ ((packed)) dls_teardown; + struct{ + u8 action_code; + u8 element_id; +@@ -184,6 +289,25 @@ + u8 new_chan; + u8 switch_count; + } __attribute__((packed)) chan_switch; ++ struct{ ++ u8 action_code; ++ u8 dialog_token; ++ __le16 capab; ++ __le16 timeout; ++ __le16 start_seq_num; ++ } __attribute__((packed)) addba_req; ++ struct{ ++ u8 action_code; ++ u8 dialog_token; ++ __le16 status; ++ __le16 capab; ++ __le16 timeout; ++ } __attribute__((packed)) addba_resp; ++ struct{ ++ u8 action_code; ++ __le16 params; ++ __le16 reason_code; ++ }__attribute__((packed)) delba; + } u; + } __attribute__ ((packed)) action; + } u; +@@ -259,6 +383,18 @@ + WLAN_STATUS_UNSUPP_RSN_VERSION = 44, + WLAN_STATUS_INVALID_RSN_IE_CAP = 45, + WLAN_STATUS_CIPHER_SUITE_REJECTED = 46, ++ /* 802.11e */ ++ WLAN_STATUS_UNSPECIFIED_QOS = 32, ++ WLAN_STATUS_ASSOC_DENIED_NOBANDWIDTH = 33, ++ WLAN_STATUS_ASSOC_DENIED_LOWACK = 34, ++ WLAN_STATUS_ASSOC_DENIED_UNSUPP_QOS = 35, ++ WLAN_STATUS_REQUEST_DECLINED = 37, ++ WLAN_STATUS_INVALID_QOS_PARAM = 38, ++ WLAN_STATUS_CHANGE_TSPEC = 39, ++ WLAN_STATUS_WAIT_TS_DELAY = 47, ++ WLAN_STATUS_NO_DIRECT_LINK = 48, ++ WLAN_STATUS_STA_NOT_PRESENT = 49, ++ WLAN_STATUS_STA_NOT_QSTA = 50, + }; + + +@@ -289,9 +425,50 @@ + WLAN_REASON_INVALID_RSN_IE_CAP = 22, + WLAN_REASON_IEEE8021X_FAILED = 23, + WLAN_REASON_CIPHER_SUITE_REJECTED = 24, ++ /* 802.11e */ ++ WLAN_REASON_DISASSOC_UNSPECIFIED_QOS = 32, ++ WLAN_REASON_DISASSOC_QAP_NO_BANDWIDTH = 33, ++ WLAN_REASON_DISASSOC_LOW_ACK = 34, ++ WLAN_REASON_DISASSOC_QAP_EXCEED_TXOP = 35, ++ WLAN_REASON_QSTA_LEAVE_QBSS = 36, ++ WLAN_REASON_QSTA_NOT_USE = 37, ++ WLAN_REASON_QSTA_REQUIRE_SETUP = 38, ++ WLAN_REASON_QSTA_TIMEOUT = 39, ++ WLAN_REASON_QSTA_CIPHER_NOT_SUPP = 45, + }; + + ++/* Category Code */ ++enum ieee80211_category { ++ WLAN_CATEGORY_SPECTRUM_MGMT = 0, ++ WLAN_CATEGORY_QOS = 1, ++ WLAN_CATEGORY_DLS = 2, ++ WLAN_CATEGORY_BACK = 3, ++ WLAN_CATEGORY_WMM = 17, ++}; ++ ++/* QoS Action Code */ ++enum ieee80211_qos_actioncode { ++ WLAN_ACTION_QOS_ADDTS_REQ = 0, ++ WLAN_ACTION_QOS_ADDTS_RESP = 1, ++ WLAN_ACTION_QOS_DELTS = 2, ++ WLAN_ACTION_QOS_SCHEDULE = 3, ++}; ++ ++/* DLS Action Code */ ++enum ieee80211_dls_actioncode { ++ WLAN_ACTION_DLS_REQ = 0, ++ WLAN_ACTION_DLS_RESP = 1, ++ WLAN_ACTION_DLS_TEARDOWN = 2, ++}; ++ ++/* BACK Action Code */ ++enum ieee80211_back_actioncode { ++ WLAN_ACTION_ADDBA_REQ = 0, ++ WLAN_ACTION_ADDBA_RESP = 1, ++ WLAN_ACTION_DELBA = 2, ++}; ++ + /* Information Element IDs */ + enum ieee80211_eid { + WLAN_EID_SSID = 0, +@@ -307,6 +484,15 @@ + WLAN_EID_HP_PARAMS = 8, + WLAN_EID_HP_TABLE = 9, + WLAN_EID_REQUEST = 10, ++ /* 802.11e */ ++ WLAN_EID_QBSS_LOAD = 11, ++ WLAN_EID_EDCA_PARAM_SET = 12, ++ WLAN_EID_TSPEC = 13, ++ WLAN_EID_TCLAS = 14, ++ WLAN_EID_SCHEDULE = 15, ++ WLAN_EID_TS_DELAY = 43, ++ WLAN_EID_TCLAS_PROCESSING = 44, ++ WLAN_EID_QOS_CAPA = 46, + /* 802.11h */ + WLAN_EID_PWR_CONSTRAINT = 32, + WLAN_EID_PWR_CAPABILITY = 33, +@@ -321,6 +507,9 @@ + /* 802.11g */ + WLAN_EID_ERP_INFO = 42, + WLAN_EID_EXT_SUPP_RATES = 50, ++ /* 802.11n */ ++ WLAN_EID_HT_CAPABILITY = 45, ++ WLAN_EID_HT_EXTRA_INFO = 61, + /* 802.11i */ + WLAN_EID_RSN = 48, + WLAN_EID_WPA = 221, +@@ -329,6 +518,9 @@ + WLAN_EID_QOS_PARAMETER = 222 + }; + ++/* 80211n */ ++#define IEEE80211_QOS_CONTROL_A_MSDU_PRESENT 0x0080 ++ + /* cipher suite selectors */ + #define WLAN_CIPHER_SUITE_USE_GROUP 0x000FAC00 + #define WLAN_CIPHER_SUITE_WEP40 0x000FAC01 +@@ -339,4 +531,37 @@ + + #define WLAN_MAX_KEY_LEN 32 + ++enum ieee80211_tsinfo_direction { ++ WLAN_TSINFO_UPLINK = 0, ++ WLAN_TSINFO_DOWNLINK = 1, ++ WLAN_TSINFO_DIRECTLINK = 2, ++ WLAN_TSINFO_BIDIRECTIONAL = 3, ++}; ++ ++enum ieee80211_tsinfo_access { ++ WLAN_TSINFO_EDCA = 1, ++ WLAN_TSINFO_HCCA = 2, ++ WLAN_TSINFO_HEMM = 3, ++}; ++ ++enum ieee80211_tsinfo_psb { ++ WLAN_TSINFO_PSB_LEGACY = 0, ++ WLAN_TSINFO_PSB_APSD = 1, ++}; ++ ++ ++/* WI-FI Alliance OUI Type and Subtype */ ++enum wifi_oui_type { ++ WIFI_OUI_TYPE_WPA = 1, ++ WIFI_OUI_TYPE_WMM = 2, ++ WIFI_OUI_TYPE_WSC = 4, ++ WIFI_OUI_TYPE_PSD = 6, ++}; ++ ++enum wifi_oui_stype_wmm { ++ WIFI_OUI_STYPE_WMM_INFO = 0, ++ WIFI_OUI_STYPE_WMM_PARAM = 1, ++ WIFI_OUI_STYPE_WMM_TSPEC = 2, ++}; ++ + #endif /* IEEE80211_H */ +Index: linux-2.6.22-rc4/include/linux/nl80211.h +=================================================================== +--- linux-2.6.22-rc4.orig/include/linux/nl80211.h 2007-06-10 21:32:10.000000000 +0100 ++++ linux-2.6.22-rc4/include/linux/nl80211.h 2007-06-10 21:33:26.000000000 +0100 +@@ -7,6 +7,217 @@ + */ + + /** ++ * enum nl80211_commands - supported nl80211 commands ++ * @NL80211_CMD_UNSPEC: unspecified command to catch errors ++ * @NL80211_CMD_RENAME_WIPHY: rename a wiphy, needs ++ * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME ++ * @NL80211_CMD_WIPHY_NEWNAME: rename notification ++ * @NL80211_CMD_GET_CMDLIST: TO BE DEFINED PROPERLY. currently the code makes ++ * it depend on the wiphy only but it really should depend on the ++ * interface type too.... ++ * @NL80211_CMD_NEW_CMDLIST: command list result ++ * @NL80211_CMD_ADD_VIRTUAL_INTERFACE: create a virtual interface for the ++ * wiphy identified by an %NL80211_ATTR_WIPHY attribute with the given ++ * %NL80211_ATTR_IFTYPE and %NL80211_ATTR_IFNAME. ++ * @NL80211_CMD_DEL_VIRTUAL_INTERFACE: destroy a virtual interface identified ++ * by %NL80211_ATTR_IFINDEX. ++ * @NL80211_CMD_CHANGE_VIRTUAL_INTERFACE: change type of virtual interface to ++ * the type given by %NL80211_ATTR_IFTYPE, the interface is identified by ++ * %NL80211_ATTR_IFINDEX. ++ * @NL80211_CMD_GET_WIPHYS: request a list of all wiphys present in the system ++ * @NL80211_CMD_NEW_WIPHYS: returned list of all wiphys ++ * @NL80211_CMD_GET_INTERFACES: request a list of all interfaces belonging to ++ * the wiphy identified by %NL80211_ATTR_WIPHY ++ * @NL80211_CMD_NEW_INTERFACES: result for %NL80211_CMD_GET_INTERFACES ++ * @NL80211_CMD_INITIATE_SCAN: initiate a scan with the passed parameters. THe ++ * parameters may contain %NL80211_ATTR_FLAG_SCAN_ACTIVE, ++ * %NL80211_ATTR_PHYMODE and a list of channels in an ++ * %NL80211_ATTR_CHANNEL_LIST attribute (an array of nested attributes) ++ * containing %NL80211_ATTR_CHANNEL, %NL80211_ATTR_PHYMODE, and possibly ++ * %NL80211_ATTR_FLAG_SCAN_ACTIVE. The outer %NL80211_ATTR_FLAG_SCAN_ACTIVE ++ * is ignored when a channel list is present. ++ * @NL80211_CMD_SCAN_RESULT: scan result, contains an array in ++ * %NL80211_ATTR_BSS_LIST. ++ * @NL80211_CMD_ASSOCIATE: associate with the given parameters ++ * (%NL80211_ATTR_SSID is mandatory, %NL80211_ATTR_TIMEOUT_TU, ++ * %NL80211_ATTR_BSSID, %NL80211_ATTR_CHANNEL, %NL80211_ATTR_PHYMODE, ++ * and %NL80211_ATTR_IE may be given) ++ * @NL80211_CMD_ADD_KEY: add a key with given %NL80211_ATTR_KEY_DATA, ++ * %NL80211_ATTR_KEY_ID, %NL80211_ATTR_KEY_TYPE, %NL80211_ATTR_MAC and ++ * %NL80211_ATTR_KEY_CIPHER attributes. ++ * @NL80211_CMD_DEL_KEY: delete a key identified by %NL80211_ATTR_KEY_ID, ++ * %NL80211_ATTR_KEY_TYPE and %NL80211_ATTR_MAC or all keys. ++ * @__NL80211_CMD_AFTER_LAST: internal use ++ */ ++enum nl80211_commands { ++/* don't change the order or add anything inbetween, this is ABI! */ ++ NL80211_CMD_UNSPEC, ++ /* %input: wiphy, wiphy_name */ ++ NL80211_CMD_RENAME_WIPHY, ++ NL80211_CMD_WIPHY_NEWNAME, ++ /* %input: wiphy|ifindex */ ++ NL80211_CMD_GET_CMDLIST, ++ NL80211_CMD_NEW_CMDLIST, ++ /* %input: wiphy, ifname, {iftype} */ ++ NL80211_CMD_ADD_VIRTUAL_INTERFACE, ++ /* %input: wiphy, ifindex */ ++ NL80211_CMD_DEL_VIRTUAL_INTERFACE, ++ /* %input: ifindex, iftype */ ++ NL80211_CMD_CHANGE_VIRTUAL_INTERFACE, ++ /* %input: */ ++ NL80211_CMD_GET_WIPHYS, ++ NL80211_CMD_NEW_WIPHYS, ++ /* %input: wiphy */ ++ NL80211_CMD_GET_INTERFACES, ++ NL80211_CMD_NEW_INTERFACES, ++ NL80211_CMD_INITIATE_SCAN, ++ NL80211_CMD_SCAN_RESULT, ++ NL80211_CMD_GET_ASSOCIATION, ++ NL80211_CMD_ASSOCIATION_CHANGED, ++ NL80211_CMD_ASSOCIATE, ++ NL80211_CMD_DISASSOCIATE, ++ NL80211_CMD_DEAUTH, ++ NL80211_CMD_GET_AUTH_LIST, ++ NL80211_CMD_NEW_AUTH_LIST, ++ NL80211_CMD_AUTHENTICATION_CHANGED, ++ NL80211_CMD_AP_SET_BEACON, ++ NL80211_CMD_AP_ADD_STA, ++ NL80211_CMD_AP_UPDATE_STA, ++ NL80211_CMD_AP_GET_STA_INFO, ++ NL80211_CMD_AP_SET_RATESETS, ++ NL80211_CMD_ADD_KEY, ++ NL80211_CMD_DEL_KEY, ++ ++ /* add commands here */ ++ ++ /* used to define NL80211_CMD_MAX below */ ++ __NL80211_CMD_AFTER_LAST ++}; ++#define NL80211_CMD_MAX (__NL80211_CMD_AFTER_LAST - 1) ++ ++ ++/** ++ * enum nl80211_attrs - nl80211 netlink attributes ++ * @NL80211_ATTR_UNSPEC: unspecified attribute to catch errors ++ * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on ++ * @NL80211_ATTR_IFNAME: network interface name ++ * @NL80211_ATTR_WIPHY: index of wiphy to operate on, cf. ++ * /sys/class/ieee80211//index ++ * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming) ++ * @NL80211_ATTR_CMDS: list of u8's identifying commands a device supports ++ * @NL80211_ATTR_IFTYPE: type of virtual interface, see &enum nl80211_iftype ++ * @NL80211_ATTR_INTERFACE_LIST: interface array, nested netlink attribute ++ * @NL80211_ATTR_WIPHY_LIST: wiphy array, nested netlink attribute ++ * @NL80211_ATTR_BSSID: BSSID (must be 6 bytes) ++ * @NL80211_ATTR_SSID: SSID (1-32 bytes) ++ * @NL80211_ATTR_CHANNEL: channel number ++ * @NL80211_ATTR_PHYMODE: PHY mode, see &enum nl80211_phymode ++ * @NL80211_ATTR_CHANNEL_LIST: netlink nested attribute array containing scan ++ * parameters for channels ++ * @NL80211_ATTR_BSS_LIST: nested attribute containing an array ++ * @NL80211_ATTR_BSSTYPE: BSS type, see &enum nl80211_bsstype ++ * @NL80211_ATTR_BEACON_PERIOD: beacon period ++ * @NL80211_ATTR_DTIM_PERIOD: DTIM period ++ * @NL80211_ATTR_TIMESTAMP: 64-bit timestamp of received beacon/probe response ++ * @NL80211_ATTR_IE: information element(s), maximum length %NL80211_MAX_IE_LEN ++ * @NL80211_ATTR_AUTH_ALGORITHM: authentication algorithm ++ * @NL80211_ATTR_TIMEOUT_TU: timeout in TU (TO BE USED) ++ * @NL80211_ATTR_REASON_CODE: 802.11 reason code ++ * @NL80211_ATTR_ASSOCIATION_ID: association ID (u16, 1-2007) ++ * @NL80211_ATTR_DEAUTHENTICATED: TO BE USED ++ * @NL80211_ATTR_RX_SENSITIVITY: receiver sensitivity in dBm ++ * @NL80211_ATTR_TRANSMIT_POWER: transmit power in mW ++ * @NL80211_ATTR_FRAG_THRESHOLD: fragmentation threshold (bytes) ++ * @NL80211_ATTR_FLAG_SCAN_ACTIVE: netlink flag indiciating active scan ++ * @NL80211_ATTR_KEY_DATA: temporal key data ++ * @NL80211_ATTR_KEY_ID: key ID (u8, 0-3) ++ * @NL80211_ATTR_KEY_TYPE: key type (see &enum nl80211_keytype) ++ * @NL80211_ATTR_MAC: MAC address ++ * @NL80211_ATTR_KEY_CIPHER: key cipher suite (u32) ++ * @__NL80211_ATTR_AFTER_LAST: internal use ++ */ ++enum nl80211_attrs { ++/* don't change the order or add anything inbetween, this is ABI! */ ++ NL80211_ATTR_UNSPEC, ++ /* %type: u32 */ ++ NL80211_ATTR_IFINDEX, ++ /* %type: nulstring */ ++ NL80211_ATTR_IFNAME, ++ /* %type: u32 */ ++ NL80211_ATTR_WIPHY, ++ /* %type: nulstring */ ++ NL80211_ATTR_WIPHY_NAME, ++ NL80211_ATTR_CMDS, ++ /* %type: u32 */ ++ NL80211_ATTR_IFTYPE, ++ NL80211_ATTR_INTERFACE_LIST, ++ NL80211_ATTR_WIPHY_LIST, ++ NL80211_ATTR_BSSID, ++ NL80211_ATTR_SSID, ++ NL80211_ATTR_CHANNEL, ++ NL80211_ATTR_PHYMODE, ++ NL80211_ATTR_CHANNEL_LIST, ++ NL80211_ATTR_BSS_LIST, ++ NL80211_ATTR_BSSTYPE, ++ NL80211_ATTR_BEACON_PERIOD, ++ NL80211_ATTR_DTIM_PERIOD, ++ NL80211_ATTR_TIMESTAMP, ++ NL80211_ATTR_IE, ++ NL80211_ATTR_AUTH_ALGORITHM, ++ NL80211_ATTR_TIMEOUT_TU, ++ NL80211_ATTR_REASON_CODE, ++ NL80211_ATTR_ASSOCIATION_ID, ++ NL80211_ATTR_DEAUTHENTICATED, ++ NL80211_ATTR_RX_SENSITIVITY, ++ NL80211_ATTR_TRANSMIT_POWER, ++ NL80211_ATTR_FRAG_THRESHOLD, ++ NL80211_ATTR_FLAG_SCAN_ACTIVE, ++ ++ NL80211_ATTR_KEY_DATA, ++ NL80211_ATTR_KEY_ID, ++ NL80211_ATTR_KEY_TYPE, ++ NL80211_ATTR_MAC, ++ NL80211_ATTR_KEY_CIPHER, ++ ++ NL80211_ATTR_BEACON_HEAD, ++ NL80211_ATTR_BEACON_TAIL, ++ ++ /* add attributes here, update the policy in nl80211.c */ ++ ++ /* used to define NL80211_ATTR_MAX below */ ++ __NL80211_ATTR_AFTER_LAST, ++}; ++#define NL80211_ATTR_MAX (__NL80211_ATTR_AFTER_LAST - 1) ++ ++/** ++ * enum nl80211_multicast_groups - multicast groups for nl80211 ++ * @NL80211_GROUP_CONFIG: members of this group are notified of ++ * configuration changes ++ */ ++enum nl80211_multicast_groups { ++ /* be notified of configuration changes like wiphy renames */ ++ NL80211_GROUP_CONFIG, ++ ++ /* add groups here */ ++ ++ /* keep last */ ++ __NL80211_GROUP_AFTER_LAST ++}; ++#define NL80211_GROUP_MAX (__NL80211_GROUP_AFTER_LAST - 1) ++ ++/* ++ * maximum length of IE(s) passed in an NL80211_ATTR_IE. ++ * this is an arbitrary limit, 774 means three full-length ++ * IEs would fit... increase if necessary */ ++#define NL80211_MAX_IE_LEN 774 ++ ++/* ++ * maximum number of items in an ATTR_CHANNEL_LIST, ++ * just to avoid too large allocations ++ */ ++#define NL80211_MAX_CHANNEL_LIST_ITEM 200 ++ ++/** + * enum nl80211_iftype - (virtual) interface types + * @NL80211_IFTYPE_UNSPECIFIED: unspecified type, driver decides + * @NL80211_IFTYPE_ADHOC: independent BSS member +@@ -35,4 +246,56 @@ + }; + #define NL80211_IFTYPE_MAX (__NL80211_IFTYPE_AFTER_LAST - 1) + ++/** ++ * enum nl80211_phymode - PHY modes ++ * @NL80211_PHYMODE_A: 5 GHz PHY ++ * @NL80211_PHYMODE_B: 2.4 GHz PHY (B mode) ++ * @NL80211_PHYMODE_G: 2.4 GHz PHY (G, compatible with B) ++ * @__NL80211_PHYMODE_AFTER_LAST: internal use ++ * ++ * These values are used for %NL80211_ATTR_PHYMODE. ++ */ ++enum nl80211_phymode { ++ NL80211_PHYMODE_A, ++ NL80211_PHYMODE_B, ++ NL80211_PHYMODE_G, ++ ++ /* keep last */ ++ __NL80211_PHYMODE_AFTER_LAST ++}; ++#define NL80211_PHYMODE_MAX (__NL80211_PHYMODE_AFTER_LAST - 1) ++ ++/** ++ * enum nl80211_bsstype - BSS types ++ * @NL80211_BSSTYPE_INFRASTRUCTURE: infrastructure BSS ++ * @NL80211_BSSTYPE_INDEPENDENT: independent BSS (ad-hoc network) ++ * @__NL80211_BSSTYPE_AFTER_LAST: internal use ++ * ++ * These values are used for %NL80211_ATTR_BSSTYPE. ++ */ ++enum nl80211_bsstype { ++ NL80211_BSSTYPE_INFRASTRUCTURE, ++ NL80211_BSSTYPE_INDEPENDENT, ++ ++ /* keep last */ ++ __NL80211_BSSTYPE_AFTER_LAST ++}; ++#define NL80211_BSSTYPE_MAX (__NL80211_BSSTYPE_AFTER_LAST - 1) ++ ++/** ++ * enum nl80211_keytype - key types ++ * @NL80211_KEYTYPE_GROUP: group key ++ * @NL80211_KEYTYPE_PAIRWISE: pairwise key ++ * @NL80211_KEYTYPE_PEER: peer key ++ */ ++enum nl80211_keytype { ++ NL80211_KEYTYPE_GROUP, ++ NL80211_KEYTYPE_PAIRWISE, ++ NL80211_KEYTYPE_PEER, ++ ++ /* keep last */ ++ __NL80211_KEYTYPE_AFTER_LAST ++}; ++#define NL80211_KEYTYPE_MAX (__NL80211_KEYTYPE_AFTER_LAST - 1) ++ + #endif /* __LINUX_NL80211_H */ +Index: linux-2.6.22-rc4/include/net/cfg80211.h +=================================================================== +--- linux-2.6.22-rc4.orig/include/net/cfg80211.h 2007-06-10 21:32:10.000000000 +0100 ++++ linux-2.6.22-rc4/include/net/cfg80211.h 2007-06-10 21:33:26.000000000 +0100 +@@ -11,6 +11,69 @@ + * Copyright 2006 Johannes Berg + */ + ++/** ++ * struct scan_channel - describes a single channel to scan ++ * @phymode: PHY mode for this channel ++ * @channel: channel number (1-14, ...) ++ * @active: scan actively or passively on this channel ++ */ ++struct scan_channel { ++ int phymode; ++ u32 channel; ++ int active; ++}; ++ ++/** ++ * struct scan_params - describes scan parameters ++ * @n_channels: number of items in @channels array or -1 to indicate all ++ * channels should be scanned (in that case @channels will be %NULL) ++ * @active: when n_channels is -1 this determines active/passive scanning. ++ * @phymode: when n_channels is -1 this determines PHY mode to scan. It is ++ * not possible to scan different PHY modes in one request w/o giving ++ * a channel list. ++ * @channels: array containing @n_channels &struct scan_channel items ++ */ ++struct scan_params { ++ int n_channels; ++ int active; ++ int phymode; ++ struct scan_channel *channels; ++}; ++ ++/** ++ * struct association_params - describes association parameters ++ * @valid: this member contains flags which items are valid ++ * @bssid: the BSSID of the BSS to associate [%ASSOC_PARAMS_BSSID] ++ * @timeout: timeout (in TU) [%ASSOC_PARAMS_TIMEOUT] ++ * @ie: information element(s) to include in the association frames [%ASSOC_PARAMS_IE] ++ * @ie_len: length of the information element(s) ++ * @ssid: the SSID, always valid. ++ * @ssid_len: length of the SSID ++ */ ++struct association_params { ++ u8 *bssid; ++ u32 timeout; ++ u8 *ie; ++ int ie_len; ++ u8 *ssid; ++ int ssid_len; ++ ++ unsigned int valid; ++}; ++#define ASSOC_PARAMS_TIMEOUT (1<<0) ++ ++/** ++ * struct key_params - key information ++ */ ++struct key_params { ++ u8 *key; ++ int key_len; ++ int key_id; ++ u32 key_type; ++ u8 *macaddress; ++ u32 cipher; ++}; ++ + /* from net/wireless.h */ + struct wiphy; + +@@ -30,11 +93,62 @@ + * @add_virtual_intf: create a new virtual interface with the given name + * + * @del_virtual_intf: remove the virtual interface determined by ifindex. ++ * ++ * @change_virtual_intf: change type of virtual interface ++ * ++ * @associate: associate with given parameters ++ * ++ * @disassociate: disassociate from current AP ++ * ++ * @deauth: deauth from current AP ++ * ++ * @initiate_scan: scan with the given information (see &struct scan_params above) ++ * ++ * @get_association: get BSSID of the BSS that the device is currently ++ * associated to and return 1, or return 0 if not ++ * associated (or a negative error code) ++ * @get_auth_list: get list of BSSIDs of all BSSs the device has ++ * authenticated with, must call next_bssid for each, ++ * next_bssid returns non-zero on error, the given data ++ * is to be passed to that callback ++ * @add_key: add a key using &struct key_params ++ * @del_key: delete a key using info from &struct key_params + */ + struct cfg80211_ops { + int (*add_virtual_intf)(struct wiphy *wiphy, char *name, + unsigned int type); + int (*del_virtual_intf)(struct wiphy *wiphy, int ifindex); ++ int (*change_virtual_intf)(struct wiphy *wiphy, int ifindex, ++ unsigned int type); ++ ++ int (*associate)(struct wiphy *wiphy, struct net_device *dev, ++ struct association_params *params); ++ int (*disassociate)(struct wiphy *wiphy, struct net_device *dev); ++ int (*deauth)(struct wiphy *wiphy, struct net_device *dev); ++ ++ ++ int (*initiate_scan)(struct wiphy *wiphy, struct net_device *dev, ++ struct scan_params *params); ++ ++ ++ int (*get_association)(struct wiphy *wiphy, struct net_device *dev, ++ u8 *bssid); ++ ++ int (*get_auth_list)(struct wiphy *wiphy, struct net_device *dev, ++ void *data, ++ int (*next_bssid)(void *data, u8 *bssid)); ++ ++ int (*add_key)(struct wiphy *wiphy, struct net_device *dev, ++ struct key_params *params); ++ int (*del_key)(struct wiphy *wiphy, struct net_device *dev, ++ struct key_params *params); + }; + ++ ++/* helper functions specific to nl80211 */ ++extern void *nl80211hdr_put(struct sk_buff *skb, u32 pid, ++ u32 seq, int flags, u8 cmd); ++extern void *nl80211msg_new(struct sk_buff **skb, u32 pid, ++ u32 seq, int flags, u8 cmd); ++ + #endif /* __NET_CFG80211_H */ +Index: linux-2.6.22-rc4/include/net/iw_handler.h +=================================================================== +--- linux-2.6.22-rc4.orig/include/net/iw_handler.h 2007-06-10 21:32:10.000000000 +0100 ++++ linux-2.6.22-rc4/include/net/iw_handler.h 2007-06-10 21:33:26.000000000 +0100 +@@ -431,7 +431,13 @@ + * Those may be called only within the kernel. + */ + +-/* functions that may be called by driver modules */ ++/* First : function strictly used inside the kernel */ ++ ++/* Handle /proc/net/wireless, called in net/code/dev.c */ ++extern int dev_get_wireless_info(char * buffer, char **start, off_t offset, ++ int length); ++ ++/* Second : functions that may be called by driver modules */ + + /* Send a single event to user space */ + extern void wireless_send_event(struct net_device * dev, +Index: linux-2.6.22-rc4/include/net/mac80211.h +=================================================================== +--- linux-2.6.22-rc4.orig/include/net/mac80211.h 2007-06-10 21:32:10.000000000 +0100 ++++ linux-2.6.22-rc4/include/net/mac80211.h 2007-06-10 21:33:26.000000000 +0100 +@@ -300,7 +300,6 @@ + /* Following five fields are used for IEEE 802.11H */ + unsigned int radar_detect; + unsigned int spect_mgmt; +- /* All following fields are currently unused. */ + unsigned int quiet_duration; /* duration of quiet period */ + unsigned int quiet_offset; /* how far into the beacon is the quiet + * period */ +@@ -514,6 +513,9 @@ + * per-packet RC4 key with each TX frame when doing hwcrypto */ + #define IEEE80211_HW_TKIP_REQ_PHASE2_KEY (1<<14) + ++ /* The device capable of supporting 11n */ ++#define IEEE80211_HW_SUPPORT_HT_MODE (1<<15) ++ + u32 flags; /* hardware flags defined above */ + + /* Set to the size of a needed device specific skb headroom for TX skbs. */ +@@ -641,8 +643,7 @@ + * used if the wlan hardware or low-level driver implements PAE. + * 80211.o module will anyway filter frames based on authorization + * state, so this function pointer can be NULL if low-level driver does +- * not require event notification about port state changes. +- * Currently unused. */ ++ * not require event notification about port state changes. */ + int (*set_port_auth)(struct ieee80211_hw *hw, u8 *addr, + int authorized); + +@@ -694,8 +695,9 @@ + /* Get statistics of the current TX queue status. This is used to get + * number of currently queued packets (queue length), maximum queue + * size (limit), and total number of packets sent using each TX queue +- * (count). +- * Currently unused. */ ++ * (count). This information is used for WMM to find out which TX ++ * queues have room for more packets and by hostapd to provide ++ * statistics about the current queueing state to external programs. */ + int (*get_tx_stats)(struct ieee80211_hw *hw, + struct ieee80211_tx_queue_stats *stats); + +@@ -705,12 +707,25 @@ + * Must be atomic. */ + u64 (*get_tsf)(struct ieee80211_hw *hw); + ++ /* Call low level driver with 11n Block Ack action */ ++ int (*handle_ba_action)(struct ieee80211_hw *hw, ++ struct ieee80211_mgmt *mgmt); ++ + /* Reset the TSF timer and allow firmware/hardware to synchronize with + * other STAs in the IBSS. This is only used in IBSS mode. This + * function is optional if the firmware/hardware takes full care of + * TSF synchronization. */ + void (*reset_tsf)(struct ieee80211_hw *hw); + ++ /* Configure ht parameters. */ ++ int (*conf_ht)(struct ieee80211_hw *hw, ++ struct ieee80211_ht_capability *ht_cap_param, ++ struct ieee80211_ht_additional_info *ht_extra_param); ++ ++ /* Get ht capabilities from the device */ ++ void (*get_ht_capab)(struct ieee80211_hw *hw, ++ struct ieee80211_ht_capability *ht_cap_param); ++ + /* Setup beacon data for IBSS beacons. Unlike access point (Master), + * IBSS uses a fixed beacon frame which is configured using this + * function. This handler is required only for IBSS mode. */