From: Stijn Tintel Date: Wed, 6 Dec 2017 22:51:31 +0000 (+0100) Subject: kernel: bump 4.9 to 4.9.67 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f9974786551750ea47cd1faf1e739d6a39ec2dc7;p=openwrt%2Fstaging%2Faparcar.git kernel: bump 4.9 to 4.9.67 Refresh patches. Remove upstreamed patches: - generic/190-1-5-e1000e-Fix-error-path-in-link-detection.patch - generic/190-3-5-e1000e-Fix-return-value-test.patch - generic/190-4-5-e1000e-Separate-signaling-for-link-check-link-up.patch - generic/190-5-5-e1000e-Avoid-receiver-overrun-interrupt-bursts.patch - ramips/0102-MIPS-ralink-Fix-MT7628-pinmux.patch - ramips/0103-MIPS-ralink-Fix-typo-in-mt7628-pinmux-function Update patches that no longer apply: - layerscape/815-spi-support-layerscape.patch - ramips/0099-pci-mt7620.patch Compile-tested on ar71xx, brcm2708/bcm2708, octeon and x86/64. Runtime-tested on ar71xx, brcm2708/bcm2708, octeon and x86/64. Signed-off-by: Stijn Tintel --- diff --git a/include/kernel-version.mk b/include/kernel-version.mk index 8fb560ec49..f1fb66a36c 100644 --- a/include/kernel-version.mk +++ b/include/kernel-version.mk @@ -4,11 +4,11 @@ LINUX_RELEASE?=1 LINUX_VERSION-3.18 = .71 LINUX_VERSION-4.4 = .100 -LINUX_VERSION-4.9 = .65 +LINUX_VERSION-4.9 = .67 LINUX_KERNEL_HASH-3.18.71 = 5abc9778ad44ce02ed6c8ab52ece8a21c6d20d21f6ed8a19287b4a38a50c1240 LINUX_KERNEL_HASH-4.4.100 = 9936cd99c4bd35f6bc6962c9acdd1fa2ac8999e07a9be6a94a03b5492f1bd14f -LINUX_KERNEL_HASH-4.9.65 = 24ba70877549a3cf25dc5f12efd260d3e957bce64c087de98baf8968ee514895 +LINUX_KERNEL_HASH-4.9.67 = 7fbaa7dcc17877dfa0c96fb9a7d2f4ffed20ceeb13cbbeb18d77213c6cf75f7d ifdef KERNEL_PATCHVER LINUX_VERSION:=$(KERNEL_PATCHVER)$(strip $(LINUX_VERSION-$(KERNEL_PATCHVER))) diff --git a/target/linux/ar71xx/patches-4.9/432-spi-rb4xx-spi-driver.patch b/target/linux/ar71xx/patches-4.9/432-spi-rb4xx-spi-driver.patch index e896d0bdf4..5428d3d1c2 100644 --- a/target/linux/ar71xx/patches-4.9/432-spi-rb4xx-spi-driver.patch +++ b/target/linux/ar71xx/patches-4.9/432-spi-rb4xx-spi-driver.patch @@ -1,6 +1,6 @@ --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig -@@ -533,6 +533,12 @@ config SPI_QUP +@@ -534,6 +534,12 @@ config SPI_QUP This driver can also be built as a module. If so, the module will be called spi_qup. diff --git a/target/linux/ar71xx/patches-4.9/433-spi-rb4xx-cpld-driver.patch b/target/linux/ar71xx/patches-4.9/433-spi-rb4xx-cpld-driver.patch index c44acab32e..b1cd6a545b 100644 --- a/target/linux/ar71xx/patches-4.9/433-spi-rb4xx-cpld-driver.patch +++ b/target/linux/ar71xx/patches-4.9/433-spi-rb4xx-cpld-driver.patch @@ -1,6 +1,6 @@ --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig -@@ -761,6 +761,13 @@ config SPI_TLE62X0 +@@ -762,6 +762,13 @@ config SPI_TLE62X0 sysfs interface, with each line presented as a kind of GPIO exposing both switch control and diagnostic feedback. diff --git a/target/linux/ar71xx/patches-4.9/435-spi-vsc7385_driver.patch b/target/linux/ar71xx/patches-4.9/435-spi-vsc7385_driver.patch index f9f1f7a1e5..fe6acde70a 100644 --- a/target/linux/ar71xx/patches-4.9/435-spi-vsc7385_driver.patch +++ b/target/linux/ar71xx/patches-4.9/435-spi-vsc7385_driver.patch @@ -1,6 +1,6 @@ --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig -@@ -768,6 +768,11 @@ config SPI_RB4XX_CPLD +@@ -769,6 +769,11 @@ config SPI_RB4XX_CPLD SPI driver for the Xilinx CPLD chip present on the MikroTik RB4xx boards. diff --git a/target/linux/cns3xxx/patches-4.9/130-Extend-PCIE_BUS_PEER2PEER-to-set-MRSS-128-to-fix-CNS3xxx-BM-DMA..patch b/target/linux/cns3xxx/patches-4.9/130-Extend-PCIE_BUS_PEER2PEER-to-set-MRSS-128-to-fix-CNS3xxx-BM-DMA..patch index 3e28b7e3cd..15c59ce954 100644 --- a/target/linux/cns3xxx/patches-4.9/130-Extend-PCIE_BUS_PEER2PEER-to-set-MRSS-128-to-fix-CNS3xxx-BM-DMA..patch +++ b/target/linux/cns3xxx/patches-4.9/130-Extend-PCIE_BUS_PEER2PEER-to-set-MRSS-128-to-fix-CNS3xxx-BM-DMA..patch @@ -1,6 +1,6 @@ --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c -@@ -2003,7 +2003,8 @@ static void pcie_write_mrrs(struct pci_d +@@ -2014,7 +2014,8 @@ static void pcie_write_mrrs(struct pci_d /* In the "safe" case, do not configure the MRRS. There appear to be * issues with setting MRRS to 0 on a number of devices. */ diff --git a/target/linux/generic/hack-4.9/904-debloat_dma_buf.patch b/target/linux/generic/hack-4.9/904-debloat_dma_buf.patch index b9a5c1dca2..4f432c3568 100644 --- a/target/linux/generic/hack-4.9/904-debloat_dma_buf.patch +++ b/target/linux/generic/hack-4.9/904-debloat_dma_buf.patch @@ -54,7 +54,7 @@ Signed-off-by: Felix Fietkau +MODULE_LICENSE("GPL"); --- a/kernel/sched/core.c +++ b/kernel/sched/core.c -@@ -2171,6 +2171,7 @@ int wake_up_state(struct task_struct *p, +@@ -2170,6 +2170,7 @@ int wake_up_state(struct task_struct *p, { return try_to_wake_up(p, state, 0); } diff --git a/target/linux/generic/pending-4.9/190-1-5-e1000e-Fix-error-path-in-link-detection.patch b/target/linux/generic/pending-4.9/190-1-5-e1000e-Fix-error-path-in-link-detection.patch deleted file mode 100644 index 8ed91db6ef..0000000000 --- a/target/linux/generic/pending-4.9/190-1-5-e1000e-Fix-error-path-in-link-detection.patch +++ /dev/null @@ -1,52 +0,0 @@ -From patchwork Fri Jul 21 18:36:23 2017 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: [1/5] e1000e: Fix error path in link detection -From: Benjamin Poirier -X-Patchwork-Id: 9857487 -Message-Id: <20170721183627.13373-1-bpoirier@suse.com> -To: Jeff Kirsher -Cc: Lennart Sorensen , - intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org, - linux-kernel@vger.kernel.org -Date: Fri, 21 Jul 2017 11:36:23 -0700 - -In case of error from e1e_rphy(), the loop will exit early and "success" -will be set to true erroneously. - -Signed-off-by: Benjamin Poirier ---- - drivers/net/ethernet/intel/e1000e/phy.c | 7 ++++--- - 1 file changed, 4 insertions(+), 3 deletions(-) - ---- a/drivers/net/ethernet/intel/e1000e/phy.c -+++ b/drivers/net/ethernet/intel/e1000e/phy.c -@@ -1744,6 +1744,7 @@ s32 e1000e_phy_has_link_generic(struct e - s32 ret_val = 0; - u16 i, phy_status; - -+ *success = false; - for (i = 0; i < iterations; i++) { - /* Some PHYs require the MII_BMSR register to be read - * twice due to the link bit being sticky. No harm doing -@@ -1763,16 +1764,16 @@ s32 e1000e_phy_has_link_generic(struct e - ret_val = e1e_rphy(hw, MII_BMSR, &phy_status); - if (ret_val) - break; -- if (phy_status & BMSR_LSTATUS) -+ if (phy_status & BMSR_LSTATUS) { -+ *success = true; - break; -+ } - if (usec_interval >= 1000) - msleep(usec_interval / 1000); - else - udelay(usec_interval); - } - -- *success = (i < iterations); -- - return ret_val; - } - diff --git a/target/linux/generic/pending-4.9/190-2-5-e1000e-Fix-wrong-comment-related-to-link-detection.patch b/target/linux/generic/pending-4.9/190-2-5-e1000e-Fix-wrong-comment-related-to-link-detection.patch index b3291dbd6f..f980bb080d 100644 --- a/target/linux/generic/pending-4.9/190-2-5-e1000e-Fix-wrong-comment-related-to-link-detection.patch +++ b/target/linux/generic/pending-4.9/190-2-5-e1000e-Fix-wrong-comment-related-to-link-detection.patch @@ -23,7 +23,7 @@ Tested-by: Aaron Brown --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c -@@ -5049,7 +5049,7 @@ static bool e1000e_has_link(struct e1000 +@@ -5066,7 +5066,7 @@ static bool e1000e_has_link(struct e1000 /* get_link_status is set on LSC (link status) interrupt or * Rx sequence error interrupt. get_link_status will stay @@ -32,7 +32,7 @@ Tested-by: Aaron Brown * for copper adapters ONLY */ switch (hw->phy.media_type) { -@@ -5067,7 +5067,7 @@ static bool e1000e_has_link(struct e1000 +@@ -5084,7 +5084,7 @@ static bool e1000e_has_link(struct e1000 break; case e1000_media_type_internal_serdes: ret_val = hw->mac.ops.check_for_link(hw); diff --git a/target/linux/generic/pending-4.9/190-3-5-e1000e-Fix-return-value-test.patch b/target/linux/generic/pending-4.9/190-3-5-e1000e-Fix-return-value-test.patch deleted file mode 100644 index a777138936..0000000000 --- a/target/linux/generic/pending-4.9/190-3-5-e1000e-Fix-return-value-test.patch +++ /dev/null @@ -1,32 +0,0 @@ -From patchwork Fri Jul 21 18:36:25 2017 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: [3/5] e1000e: Fix return value test -From: Benjamin Poirier -X-Patchwork-Id: 9857495 -Message-Id: <20170721183627.13373-3-bpoirier@suse.com> -To: Jeff Kirsher -Cc: Lennart Sorensen , - intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org, - linux-kernel@vger.kernel.org -Date: Fri, 21 Jul 2017 11:36:25 -0700 - -All the helpers return -E1000_ERR_PHY. - -Signed-off-by: Benjamin Poirier ---- - drivers/net/ethernet/intel/e1000e/netdev.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/net/ethernet/intel/e1000e/netdev.c -+++ b/drivers/net/ethernet/intel/e1000e/netdev.c -@@ -5074,7 +5074,7 @@ static bool e1000e_has_link(struct e1000 - break; - } - -- if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) && -+ if ((ret_val == -E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) && - (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) { - /* See e1000_kmrn_lock_loss_workaround_ich8lan() */ - e_info("Gigabit has been disabled, downgrading speed\n"); diff --git a/target/linux/generic/pending-4.9/190-4-5-e1000e-Separate-signaling-for-link-check-link-up.patch b/target/linux/generic/pending-4.9/190-4-5-e1000e-Separate-signaling-for-link-check-link-up.patch deleted file mode 100644 index cc2cf7393f..0000000000 --- a/target/linux/generic/pending-4.9/190-4-5-e1000e-Separate-signaling-for-link-check-link-up.patch +++ /dev/null @@ -1,90 +0,0 @@ -From patchwork Fri Jul 21 18:36:26 2017 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: [4/5] e1000e: Separate signaling for link check/link up -From: Benjamin Poirier -X-Patchwork-Id: 9857491 -Message-Id: <20170721183627.13373-4-bpoirier@suse.com> -To: Jeff Kirsher -Cc: Lennart Sorensen , - intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org, - linux-kernel@vger.kernel.org -Date: Fri, 21 Jul 2017 11:36:26 -0700 - -Lennart reported the following race condition: - -\ e1000_watchdog_task - \ e1000e_has_link - \ hw->mac.ops.check_for_link() === e1000e_check_for_copper_link - /* link is up */ - mac->get_link_status = false; - - /* interrupt */ - \ e1000_msix_other - hw->mac.get_link_status = true; - - link_active = !hw->mac.get_link_status - /* link_active is false, wrongly */ - -This problem arises because the single flag get_link_status is used to -signal two different states: link status needs checking and link status is -down. - -Avoid the problem by using the return value of .check_for_link to signal -the link status to e1000e_has_link(). - -Reported-by: Lennart Sorensen -Signed-off-by: Benjamin Poirier ---- - drivers/net/ethernet/intel/e1000e/mac.c | 11 ++++++++--- - drivers/net/ethernet/intel/e1000e/netdev.c | 2 +- - 2 files changed, 9 insertions(+), 4 deletions(-) - ---- a/drivers/net/ethernet/intel/e1000e/mac.c -+++ b/drivers/net/ethernet/intel/e1000e/mac.c -@@ -410,6 +410,9 @@ void e1000e_clear_hw_cntrs_base(struct e - * Checks to see of the link status of the hardware has changed. If a - * change in link status has been detected, then we read the PHY registers - * to get the current speed/duplex if link exists. -+ * -+ * Returns a negative error code (-E1000_ERR_*) or 0 (link down) or 1 (link -+ * up). - **/ - s32 e1000e_check_for_copper_link(struct e1000_hw *hw) - { -@@ -423,7 +426,7 @@ s32 e1000e_check_for_copper_link(struct - * Change or Rx Sequence Error interrupt. - */ - if (!mac->get_link_status) -- return 0; -+ return 1; - - /* First we want to see if the MII Status Register reports - * link. If so, then we want to get the current speed/duplex -@@ -461,10 +464,12 @@ s32 e1000e_check_for_copper_link(struct - * different link partner. - */ - ret_val = e1000e_config_fc_after_link_up(hw); -- if (ret_val) -+ if (ret_val) { - e_dbg("Error configuring flow control\n"); -+ return ret_val; -+ } - -- return ret_val; -+ return 1; - } - - /** ---- a/drivers/net/ethernet/intel/e1000e/netdev.c -+++ b/drivers/net/ethernet/intel/e1000e/netdev.c -@@ -5056,7 +5056,7 @@ static bool e1000e_has_link(struct e1000 - case e1000_media_type_copper: - if (hw->mac.get_link_status) { - ret_val = hw->mac.ops.check_for_link(hw); -- link_active = !hw->mac.get_link_status; -+ link_active = ret_val > 0; - } else { - link_active = true; - } diff --git a/target/linux/generic/pending-4.9/190-5-5-e1000e-Avoid-receiver-overrun-interrupt-bursts.patch b/target/linux/generic/pending-4.9/190-5-5-e1000e-Avoid-receiver-overrun-interrupt-bursts.patch deleted file mode 100644 index b42fed293d..0000000000 --- a/target/linux/generic/pending-4.9/190-5-5-e1000e-Avoid-receiver-overrun-interrupt-bursts.patch +++ /dev/null @@ -1,109 +0,0 @@ -From patchwork Fri Jul 21 18:36:27 2017 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: [5/5] e1000e: Avoid receiver overrun interrupt bursts -From: Benjamin Poirier -X-Patchwork-Id: 9857493 -Message-Id: <20170721183627.13373-5-bpoirier@suse.com> -To: Jeff Kirsher -Cc: Lennart Sorensen , - intel-wired-lan@lists.osuosl.org, netdev@vger.kernel.org, - linux-kernel@vger.kernel.org -Date: Fri, 21 Jul 2017 11:36:27 -0700 - -When e1000e_poll() is not fast enough to keep up with incoming traffic, the -adapter (when operating in msix mode) raises the Other interrupt to signal -Receiver Overrun. - -This is a double problem because 1) at the moment e1000_msix_other() -assumes that it is only called in case of Link Status Change and 2) if the -condition persists, the interrupt is repeatedly raised again in quick -succession. - -Ideally we would configure the Other interrupt to not be raised in case of -receiver overrun but this doesn't seem possible on this adapter. Instead, -we handle the first part of the problem by reverting to the practice of -reading ICR in the other interrupt handler, like before commit 16ecba59bc33 -("e1000e: Do not read ICR in Other interrupt"). Thanks to commit -0a8047ac68e5 ("e1000e: Fix msi-x interrupt automask") which cleared IAME -from CTRL_EXT, reading ICR doesn't interfere with RxQ0, TxQ0 interrupts -anymore. We handle the second part of the problem by not re-enabling the -Other interrupt right away when there is overrun. Instead, we wait until -traffic subsides, napi polling mode is exited and interrupts are -re-enabled. - -Reported-by: Lennart Sorensen -Fixes: 16ecba59bc33 ("e1000e: Do not read ICR in Other interrupt") -Signed-off-by: Benjamin Poirier ---- - drivers/net/ethernet/intel/e1000e/defines.h | 1 + - drivers/net/ethernet/intel/e1000e/netdev.c | 33 +++++++++++++++++++++++------ - 2 files changed, 27 insertions(+), 7 deletions(-) - ---- a/drivers/net/ethernet/intel/e1000e/defines.h -+++ b/drivers/net/ethernet/intel/e1000e/defines.h -@@ -398,6 +398,7 @@ - #define E1000_ICR_LSC 0x00000004 /* Link Status Change */ - #define E1000_ICR_RXSEQ 0x00000008 /* Rx sequence error */ - #define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */ -+#define E1000_ICR_RXO 0x00000040 /* Receiver Overrun */ - #define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */ - #define E1000_ICR_ECCER 0x00400000 /* Uncorrectable ECC Error */ - /* If this bit asserted, the driver should claim the interrupt */ ---- a/drivers/net/ethernet/intel/e1000e/netdev.c -+++ b/drivers/net/ethernet/intel/e1000e/netdev.c -@@ -1905,12 +1905,30 @@ static irqreturn_t e1000_msix_other(int - struct net_device *netdev = data; - struct e1000_adapter *adapter = netdev_priv(netdev); - struct e1000_hw *hw = &adapter->hw; -+ u32 icr; -+ bool enable = true; - -- hw->mac.get_link_status = true; -+ icr = er32(ICR); -+ if (icr & E1000_ICR_RXO) { -+ ew32(ICR, E1000_ICR_RXO); -+ enable = false; -+ /* napi poll will re-enable Other, make sure it runs */ -+ if (napi_schedule_prep(&adapter->napi)) { -+ adapter->total_rx_bytes = 0; -+ adapter->total_rx_packets = 0; -+ __napi_schedule(&adapter->napi); -+ } -+ } -+ if (icr & E1000_ICR_LSC) { -+ ew32(ICR, E1000_ICR_LSC); -+ hw->mac.get_link_status = true; -+ /* guard against interrupt when we're going down */ -+ if (!test_bit(__E1000_DOWN, &adapter->state)) { -+ mod_timer(&adapter->watchdog_timer, jiffies + 1); -+ } -+ } - -- /* guard against interrupt when we're going down */ -- if (!test_bit(__E1000_DOWN, &adapter->state)) { -- mod_timer(&adapter->watchdog_timer, jiffies + 1); -+ if (enable && !test_bit(__E1000_DOWN, &adapter->state)) { - ew32(IMS, E1000_IMS_OTHER); - } - -@@ -2683,7 +2701,8 @@ static int e1000e_poll(struct napi_struc - napi_complete_done(napi, work_done); - if (!test_bit(__E1000_DOWN, &adapter->state)) { - if (adapter->msix_entries) -- ew32(IMS, adapter->rx_ring->ims_val); -+ ew32(IMS, adapter->rx_ring->ims_val | -+ E1000_IMS_OTHER); - else - e1000_irq_enable(adapter); - } -@@ -4178,7 +4197,7 @@ static void e1000e_trigger_lsc(struct e1 - struct e1000_hw *hw = &adapter->hw; - - if (adapter->msix_entries) -- ew32(ICS, E1000_ICS_OTHER); -+ ew32(ICS, E1000_ICS_LSC | E1000_ICS_OTHER); - else - ew32(ICS, E1000_ICS_LSC); - } diff --git a/target/linux/generic/pending-4.9/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch b/target/linux/generic/pending-4.9/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch index 3b09bffa15..e9c247fad0 100644 --- a/target/linux/generic/pending-4.9/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch +++ b/target/linux/generic/pending-4.9/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch @@ -200,7 +200,7 @@ Signed-off-by: Jonas Gorski net->ipv6.ip6_blk_hole_entry->dst.dev = dev; net->ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(dev); #endif -@@ -3714,6 +3753,17 @@ static int __net_init ip6_route_net_init +@@ -3718,6 +3757,17 @@ static int __net_init ip6_route_net_init net->ipv6.ip6_blk_hole_entry->dst.ops = &net->ipv6.ip6_dst_ops; dst_init_metrics(&net->ipv6.ip6_blk_hole_entry->dst, ip6_template_metrics, true); @@ -218,7 +218,7 @@ Signed-off-by: Jonas Gorski #endif net->ipv6.sysctl.flush_delay = 0; -@@ -3732,6 +3782,8 @@ out: +@@ -3736,6 +3786,8 @@ out: return ret; #ifdef CONFIG_IPV6_MULTIPLE_TABLES @@ -227,7 +227,7 @@ Signed-off-by: Jonas Gorski out_ip6_prohibit_entry: kfree(net->ipv6.ip6_prohibit_entry); out_ip6_null_entry: -@@ -3749,6 +3801,7 @@ static void __net_exit ip6_route_net_exi +@@ -3753,6 +3805,7 @@ static void __net_exit ip6_route_net_exi #ifdef CONFIG_IPV6_MULTIPLE_TABLES kfree(net->ipv6.ip6_prohibit_entry); kfree(net->ipv6.ip6_blk_hole_entry); @@ -235,7 +235,7 @@ Signed-off-by: Jonas Gorski #endif dst_entries_destroy(&net->ipv6.ip6_dst_ops); } -@@ -3822,6 +3875,9 @@ void __init ip6_route_init_special_entri +@@ -3826,6 +3879,9 @@ void __init ip6_route_init_special_entri init_net.ipv6.ip6_prohibit_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev); init_net.ipv6.ip6_blk_hole_entry->dst.dev = init_net.loopback_dev; init_net.ipv6.ip6_blk_hole_entry->rt6i_idev = in6_dev_get(init_net.loopback_dev); diff --git a/target/linux/ipq806x/patches-4.9/0016-clk-ipq4019-report-accurate-fixed-clock-rates.patch b/target/linux/ipq806x/patches-4.9/0016-clk-ipq4019-report-accurate-fixed-clock-rates.patch index 6f7665390d..be9c4eb1b2 100644 --- a/target/linux/ipq806x/patches-4.9/0016-clk-ipq4019-report-accurate-fixed-clock-rates.patch +++ b/target/linux/ipq806x/patches-4.9/0016-clk-ipq4019-report-accurate-fixed-clock-rates.patch @@ -13,7 +13,7 @@ Signed-off-by: Matthew McClintock --- a/drivers/clk/qcom/gcc-ipq4019.c +++ b/drivers/clk/qcom/gcc-ipq4019.c -@@ -1317,12 +1317,12 @@ static int gcc_ipq4019_probe(struct plat +@@ -1327,12 +1327,12 @@ static int gcc_ipq4019_probe(struct plat { struct device *dev = &pdev->dev; diff --git a/target/linux/lantiq/patches-4.9/0090-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-contro.patch b/target/linux/lantiq/patches-4.9/0090-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-contro.patch index da48ae3a18..64597cec87 100644 --- a/target/linux/lantiq/patches-4.9/0090-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-contro.patch +++ b/target/linux/lantiq/patches-4.9/0090-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-contro.patch @@ -65,7 +65,7 @@ Signed-off-by: Mark Brown +}; --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig -@@ -403,6 +403,14 @@ config SPI_NUC900 +@@ -404,6 +404,14 @@ config SPI_NUC900 help SPI driver for Nuvoton NUC900 series ARM SoCs diff --git a/target/linux/layerscape/patches-4.9/301-arch-support-layerscape.patch b/target/linux/layerscape/patches-4.9/301-arch-support-layerscape.patch index 66860a0bb6..7216933b7c 100644 --- a/target/linux/layerscape/patches-4.9/301-arch-support-layerscape.patch +++ b/target/linux/layerscape/patches-4.9/301-arch-support-layerscape.patch @@ -310,7 +310,7 @@ Signed-off-by: Yangbo Lu #define PROT_SECT_NORMAL (PROT_SECT_DEFAULT | PMD_SECT_PXN | PMD_SECT_UXN | PMD_ATTRINDX(MT_NORMAL)) --- a/arch/arm64/include/asm/pgtable.h +++ b/arch/arm64/include/asm/pgtable.h -@@ -356,6 +356,11 @@ static inline int pmd_protnone(pmd_t pmd +@@ -370,6 +370,11 @@ static inline int pmd_protnone(pmd_t pmd __pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_DEVICE_nGnRnE) | PTE_PXN | PTE_UXN) #define pgprot_writecombine(prot) \ __pgprot_modify(prot, PTE_ATTRINDX_MASK, PTE_ATTRINDX(MT_NORMAL_NC) | PTE_PXN | PTE_UXN) diff --git a/target/linux/layerscape/patches-4.9/815-spi-support-layerscape.patch b/target/linux/layerscape/patches-4.9/815-spi-support-layerscape.patch index b9c5316518..761680913b 100644 --- a/target/linux/layerscape/patches-4.9/815-spi-support-layerscape.patch +++ b/target/linux/layerscape/patches-4.9/815-spi-support-layerscape.patch @@ -15,16 +15,6 @@ Signed-off-by: Yangbo Lu drivers/spi/spi-fsl-dspi.c | 309 ++++++++++++++++++++++++++++++++++++++++++++- 2 files changed, 305 insertions(+), 5 deletions(-) ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -365,6 +365,7 @@ config SPI_FSL_SPI - config SPI_FSL_DSPI - tristate "Freescale DSPI controller" - select REGMAP_MMIO -+ depends on HAS_DMA - depends on SOC_VF610 || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST - help - This enables support for the Freescale DSPI controller in master --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -15,6 +15,8 @@ diff --git a/target/linux/pistachio/patches-4.9/411-mtd-nand-Check-length-of-ID-before-reading-bits-per-.patch b/target/linux/pistachio/patches-4.9/411-mtd-nand-Check-length-of-ID-before-reading-bits-per-.patch index 69d96932b6..f360613f9f 100644 --- a/target/linux/pistachio/patches-4.9/411-mtd-nand-Check-length-of-ID-before-reading-bits-per-.patch +++ b/target/linux/pistachio/patches-4.9/411-mtd-nand-Check-length-of-ID-before-reading-bits-per-.patch @@ -21,7 +21,7 @@ Signed-off-by: Ezequiel Garcia --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c -@@ -4040,7 +4040,8 @@ static bool find_full_id_nand(struct mtd +@@ -4043,7 +4043,8 @@ static bool find_full_id_nand(struct mtd mtd->erasesize = type->erasesize; mtd->oobsize = type->oobsize; diff --git a/target/linux/ramips/patches-4.9/0040-nand-hack.patch b/target/linux/ramips/patches-4.9/0040-nand-hack.patch index fe2b12d2ce..e0bd5f6026 100644 --- a/target/linux/ramips/patches-4.9/0040-nand-hack.patch +++ b/target/linux/ramips/patches-4.9/0040-nand-hack.patch @@ -18,7 +18,7 @@ if (ret < 0) { if (use_bufpoi) /* Invalidate page cache */ -@@ -3203,8 +3207,11 @@ int nand_erase_nand(struct mtd_info *mtd +@@ -3206,8 +3210,11 @@ int nand_erase_nand(struct mtd_info *mtd (page + pages_per_block)) chip->pagebuf = -1; @@ -31,7 +31,7 @@ /* * See if operation failed and additional status checks are * available -@@ -4398,6 +4405,7 @@ int nand_scan_ident(struct mtd_info *mtd +@@ -4401,6 +4408,7 @@ int nand_scan_ident(struct mtd_info *mtd * cmdfunc() both expect cmd_ctrl() to be populated, * so we need to check that that's the case */ diff --git a/target/linux/ramips/patches-4.9/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch b/target/linux/ramips/patches-4.9/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch index 0288b97556..3150dd8382 100644 --- a/target/linux/ramips/patches-4.9/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch +++ b/target/linux/ramips/patches-4.9/0042-SPI-ralink-add-Ralink-SoC-spi-driver.patch @@ -16,7 +16,7 @@ Acked-by: John Crispin --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig -@@ -533,6 +533,12 @@ config SPI_QUP +@@ -534,6 +534,12 @@ config SPI_QUP This driver can also be built as a module. If so, the module will be called spi_qup. diff --git a/target/linux/ramips/patches-4.9/0043-spi-add-mt7621-support.patch b/target/linux/ramips/patches-4.9/0043-spi-add-mt7621-support.patch index 339dc5a87d..984f4ada9e 100644 --- a/target/linux/ramips/patches-4.9/0043-spi-add-mt7621-support.patch +++ b/target/linux/ramips/patches-4.9/0043-spi-add-mt7621-support.patch @@ -13,7 +13,7 @@ Signed-off-by: John Crispin --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig -@@ -539,6 +539,12 @@ config SPI_RT2880 +@@ -540,6 +540,12 @@ config SPI_RT2880 help This selects a driver for the Ralink RT288x/RT305x SPI Controller. diff --git a/target/linux/ramips/patches-4.9/0099-pci-mt7620.patch b/target/linux/ramips/patches-4.9/0099-pci-mt7620.patch index f532f30db8..997fb6a2b3 100644 --- a/target/linux/ramips/patches-4.9/0099-pci-mt7620.patch +++ b/target/linux/ramips/patches-4.9/0099-pci-mt7620.patch @@ -8,12 +8,3 @@ #define PPLL_DRV 0xa0 #define PDRV_SW_SET (1<<31) -@@ -121,7 +120,7 @@ static int wait_pciephy_busy(void) - else - break; - if (retry++ > WAITRETRY_MAX) { -- printk(KERN_WARN "PCIE-PHY retry failed.\n"); -+ pr_warn("PCIE-PHY retry failed.\n"); - return -1; - } - } diff --git a/target/linux/ramips/patches-4.9/0102-MIPS-ralink-Fix-MT7628-pinmux.patch b/target/linux/ramips/patches-4.9/0102-MIPS-ralink-Fix-MT7628-pinmux.patch deleted file mode 100644 index f2d1ab1706..0000000000 --- a/target/linux/ramips/patches-4.9/0102-MIPS-ralink-Fix-MT7628-pinmux.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 8ef4b43cd3794d63052d85898e42424fd3b14d24 Mon Sep 17 00:00:00 2001 -From: Mathias Kresin -Date: Thu, 11 May 2017 08:11:14 +0200 -Subject: [PATCH 1/2] MIPS: ralink: Fix MT7628 pinmux - -According to the datasheet the REFCLK pin is shared with GPIO#37 and -the PERST pin is shared with GPIO#36. - -Fixes: 53263a1c6852 ("MIPS: ralink: add mt7628an support") -Signed-off-by: Mathias Kresin -Acked-by: John Crispin -Cc: Ralf Baechle -Cc: linux-mips@linux-mips.org -Cc: # 3.19+ -Patchwork: https://patchwork.linux-mips.org/patch/16046/ -Signed-off-by: James Hogan ---- - arch/mips/ralink/mt7620.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/arch/mips/ralink/mt7620.c -+++ b/arch/mips/ralink/mt7620.c -@@ -141,8 +141,8 @@ static struct rt2880_pmx_func i2c_grp_mt - FUNC("i2c", 0, 4, 2), - }; - --static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("reclk", 0, 36, 1) }; --static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 37, 1) }; -+static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("reclk", 0, 37, 1) }; -+static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 36, 1) }; - static struct rt2880_pmx_func wdt_grp_mt7628[] = { FUNC("wdt", 0, 38, 1) }; - static struct rt2880_pmx_func spi_grp_mt7628[] = { FUNC("spi", 0, 7, 4) }; - diff --git a/target/linux/ramips/patches-4.9/0103-MIPS-ralink-Fix-typo-in-mt7628-pinmux-function b/target/linux/ramips/patches-4.9/0103-MIPS-ralink-Fix-typo-in-mt7628-pinmux-function deleted file mode 100644 index 9c77840f2c..0000000000 --- a/target/linux/ramips/patches-4.9/0103-MIPS-ralink-Fix-typo-in-mt7628-pinmux-function +++ /dev/null @@ -1,31 +0,0 @@ -From 05a67cc258e75ac9758e6f13d26337b8be51162a Mon Sep 17 00:00:00 2001 -From: Mathias Kresin -Date: Thu, 11 May 2017 08:11:15 +0200 -Subject: [PATCH 2/2] MIPS: ralink: Fix typo in mt7628 pinmux function - -There is a typo inside the pinmux setup code. The function is called -refclk and not reclk. - -Fixes: 53263a1c6852 ("MIPS: ralink: add mt7628an support") -Signed-off-by: Mathias Kresin -Acked-by: John Crispin -Cc: Ralf Baechle -Cc: linux-mips@linux-mips.org -Cc: # 3.19+ -Patchwork: https://patchwork.linux-mips.org/patch/16047/ -Signed-off-by: James Hogan ---- - arch/mips/ralink/mt7620.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/mips/ralink/mt7620.c -+++ b/arch/mips/ralink/mt7620.c -@@ -141,7 +141,7 @@ static struct rt2880_pmx_func i2c_grp_mt - FUNC("i2c", 0, 4, 2), - }; - --static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("reclk", 0, 37, 1) }; -+static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("refclk", 0, 37, 1) }; - static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 36, 1) }; - static struct rt2880_pmx_func wdt_grp_mt7628[] = { FUNC("wdt", 0, 38, 1) }; - static struct rt2880_pmx_func spi_grp_mt7628[] = { FUNC("spi", 0, 7, 4) }; diff --git a/target/linux/ramips/patches-4.9/0901-spansion_nand_id_fix.patch b/target/linux/ramips/patches-4.9/0901-spansion_nand_id_fix.patch index 4edc7416a7..daaa0aca65 100644 --- a/target/linux/ramips/patches-4.9/0901-spansion_nand_id_fix.patch +++ b/target/linux/ramips/patches-4.9/0901-spansion_nand_id_fix.patch @@ -13,7 +13,7 @@ Signed-off-by: Nikolay Martynov --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c -@@ -3850,6 +3850,7 @@ static void nand_decode_ext_id(struct mt +@@ -3853,6 +3853,7 @@ static void nand_decode_ext_id(struct mt /* * Field definitions are in the following datasheets: * Old style (4,5 byte ID): Samsung K9GAG08U0M (p.32) @@ -21,7 +21,7 @@ Signed-off-by: Nikolay Martynov * New Samsung (6 byte ID): Samsung K9GAG08U0F (p.44) * Hynix MLC (6 byte ID): Hynix H27UBG8T2B (p.22) * -@@ -3947,6 +3948,19 @@ static void nand_decode_ext_id(struct mt +@@ -3950,6 +3951,19 @@ static void nand_decode_ext_id(struct mt *busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0; /*