From: Daniel Golle Date: Fri, 8 Feb 2019 03:50:47 +0000 (+0100) Subject: mac80211: rt2x00: remove patch causing low tx power X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f9850e9d2c4affdde5ca42e1955306177f0524ca;p=openwrt%2Fstaging%2Fluka.git mac80211: rt2x00: remove patch causing low tx power Remove 980-rt2x00-reduce-power-consumption-on-mt7620.patch which in combination with the most recently added patch reportedly causes TX power to be too weak. "without patches rssi on receiver is ~ -23dBm with 980 about -35dBm, with both patches drops below -40dBm. with 987 only ~-28dBm" We may need to reconsider this once we have implemented TSSI. Fixes: cdb58b2bfe ("mac80211: rt2x00: reduce tx power to nominal level on RT6352") Reported-by: Tomislav Požega Signed-off-by: Daniel Golle --- diff --git a/package/kernel/mac80211/patches/rt2x00/980-rt2x00-reduce-power-consumption-on-mt7620.patch b/package/kernel/mac80211/patches/rt2x00/980-rt2x00-reduce-power-consumption-on-mt7620.patch deleted file mode 100644 index 87f9e8f7cc..0000000000 --- a/package/kernel/mac80211/patches/rt2x00/980-rt2x00-reduce-power-consumption-on-mt7620.patch +++ /dev/null @@ -1,43 +0,0 @@ -From: Tomislav Požega - -rt2x00: write registers required for reducing power consumption - -Write registers required for reducing power consumption like the vendor -driver does when ADJUST_POWER_CONSUMPTION_SUPPORT is set. -This helps devices to sync at better TX/RX rates and improves overall -performance. - -Signed-off-by: Tomislav Požega -Signed-off-by: Daniel Golle -[daniel@makrotopia.org: edited commit message] ---- - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 18 ++++++++++++++++++ - 1 file changed, 18 insertions(+), 0 deletions(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -8875,6 +8875,24 @@ static void rt2800_init_rfcsr_6352(struc - rt2800_rfcsr_write_chanreg(rt2x00dev, 58, 0x02); - rt2800_rfcsr_write_chanreg(rt2x00dev, 60, 0xC7); - -+ /* reduce power consumption */ -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 43, 0x53); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 44, 0x53); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 45, 0x53); -+ rt2800_rfcsr_write_bank(rt2x00dev, 4, 47, 0x24); -+ rt2800_rfcsr_write_bank(rt2x00dev, 6, 47, 0x64); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 48, 0x4F); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 49, 0x02); -+ rt2800_rfcsr_write_bank(rt2x00dev, 4, 55, 0x24); -+ rt2800_rfcsr_write_bank(rt2x00dev, 6, 55, 0x64); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 56, 0x4F); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 57, 0x02); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 58, 0x27); -+ rt2800_rfcsr_write_bank(rt2x00dev, 4, 59, 0x24); -+ rt2800_rfcsr_write_bank(rt2x00dev, 6, 59, 0x64); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 60, 0x4F); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 61, 0x02); -+ - /* Initialize RF DC calibration register to default value */ - rt2800_rfcsr_write_dccal(rt2x00dev, 0, 0x47); - rt2800_rfcsr_write_dccal(rt2x00dev, 1, 0x00);