From: Matthew Hagan Date: Thu, 9 Sep 2021 19:40:21 +0000 (+0000) Subject: kernel: 5.10: backport qca8k feature additions X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f97cafdd1d4de52f3254138524817980f27833cd;p=openwrt%2Fstaging%2Fxback.git kernel: 5.10: backport qca8k feature additions Backport Ansuel Smith's various qca8k feature additions: - mac-power-sel support - SGMII PLL explicit enable - tx/rx clock phase to falling edge - power-on-sel and LED open drain mode - cpu port 6 - qca8328 support - sgmii internal delay - move port config to dedicated struct - convert to yaml schema Signed-off-by: Ansuel Smith Signed-off-by: Matthew Hagan --- diff --git a/target/linux/generic/backport-5.10/797-v5.16-01-dsa-qca8k-add-mac-power-sel-support.patch b/target/linux/generic/backport-5.10/797-v5.16-01-dsa-qca8k-add-mac-power-sel-support.patch new file mode 100644 index 0000000000..c8d424de38 --- /dev/null +++ b/target/linux/generic/backport-5.10/797-v5.16-01-dsa-qca8k-add-mac-power-sel-support.patch @@ -0,0 +1,80 @@ +From d8b6f5bae6d3b648a67b6958cb98e4e97256d652 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Thu, 14 Oct 2021 00:39:06 +0200 +Subject: dsa: qca8k: add mac_power_sel support + +Add missing mac power sel support needed for ipq8064/5 SoC that require +1.8v for the internal regulator port instead of the default 1.5v. +If other device needs this, consider adding a dedicated binding to +support this. + +Signed-off-by: Ansuel Smith +Reviewed-by: Vladimir Oltean +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 31 +++++++++++++++++++++++++++++++ + drivers/net/dsa/qca8k.h | 5 +++++ + 2 files changed, 36 insertions(+) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -951,6 +951,33 @@ qca8k_setup_of_rgmii_delay(struct qca8k_ + } + + static int ++qca8k_setup_mac_pwr_sel(struct qca8k_priv *priv) ++{ ++ u32 mask = 0; ++ int ret = 0; ++ ++ /* SoC specific settings for ipq8064. ++ * If more device require this consider adding ++ * a dedicated binding. ++ */ ++ if (of_machine_is_compatible("qcom,ipq8064")) ++ mask |= QCA8K_MAC_PWR_RGMII0_1_8V; ++ ++ /* SoC specific settings for ipq8065 */ ++ if (of_machine_is_compatible("qcom,ipq8065")) ++ mask |= QCA8K_MAC_PWR_RGMII1_1_8V; ++ ++ if (mask) { ++ ret = qca8k_rmw(priv, QCA8K_REG_MAC_PWR_SEL, ++ QCA8K_MAC_PWR_RGMII0_1_8V | ++ QCA8K_MAC_PWR_RGMII1_1_8V, ++ mask); ++ } ++ ++ return ret; ++} ++ ++static int + qca8k_setup(struct dsa_switch *ds) + { + struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; +@@ -979,6 +1006,10 @@ qca8k_setup(struct dsa_switch *ds) + if (ret) + return ret; + ++ ret = qca8k_setup_mac_pwr_sel(priv); ++ if (ret) ++ return ret; ++ + /* Enable CPU Port */ + ret = qca8k_reg_set(priv, QCA8K_REG_GLOBAL_FW_CTRL0, + QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN); +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -100,6 +100,11 @@ + #define QCA8K_SGMII_MODE_CTRL_PHY (1 << 22) + #define QCA8K_SGMII_MODE_CTRL_MAC (2 << 22) + ++/* MAC_PWR_SEL registers */ ++#define QCA8K_REG_MAC_PWR_SEL 0x0e4 ++#define QCA8K_MAC_PWR_RGMII1_1_8V BIT(18) ++#define QCA8K_MAC_PWR_RGMII0_1_8V BIT(19) ++ + /* EEE control registers */ + #define QCA8K_REG_EEE_CTRL 0x100 + #define QCA8K_REG_EEE_CTRL_LPI_EN(_i) ((_i + 1) * 2) diff --git a/target/linux/generic/backport-5.10/797-v5.16-02-dt-bindings-net-dsa-qca8k-Add-SGMII-clock-phase-prop.patch b/target/linux/generic/backport-5.10/797-v5.16-02-dt-bindings-net-dsa-qca8k-Add-SGMII-clock-phase-prop.patch new file mode 100644 index 0000000000..bd768ec27d --- /dev/null +++ b/target/linux/generic/backport-5.10/797-v5.16-02-dt-bindings-net-dsa-qca8k-Add-SGMII-clock-phase-prop.patch @@ -0,0 +1,30 @@ +From fdbf35df9c091db9c46e57e9938e3f7a4f603a7c Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Thu, 14 Oct 2021 00:39:07 +0200 +Subject: dt-bindings: net: dsa: qca8k: Add SGMII clock phase properties + +Add names and descriptions of additional PORT0_PAD_CTRL properties. +qca,sgmii-(rx|tx)clk-falling-edge are for setting the respective clock +phase to failling edge. + +Co-developed-by: Matthew Hagan +Signed-off-by: Matthew Hagan +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + Documentation/devicetree/bindings/net/dsa/qca8k.txt | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt ++++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt +@@ -37,6 +37,10 @@ A CPU port node has the following option + managed entity. See + Documentation/devicetree/bindings/net/fixed-link.txt + for details. ++- qca,sgmii-rxclk-falling-edge: Set the receive clock phase to falling edge. ++ Mostly used in qca8327 with CPU port 0 set to ++ sgmii. ++- qca,sgmii-txclk-falling-edge: Set the transmit clock phase to falling edge. + + For QCA8K the 'fixed-link' sub-node supports only the following properties: + diff --git a/target/linux/generic/backport-5.10/797-v5.16-03-net-dsa-qca8k-add-support-for-sgmii-falling-edge.patch b/target/linux/generic/backport-5.10/797-v5.16-03-net-dsa-qca8k-add-support-for-sgmii-falling-edge.patch new file mode 100644 index 0000000000..e464452d82 --- /dev/null +++ b/target/linux/generic/backport-5.10/797-v5.16-03-net-dsa-qca8k-add-support-for-sgmii-falling-edge.patch @@ -0,0 +1,127 @@ +From 6c43809bf1bee76c434e365a26546a92a5fbec14 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Thu, 14 Oct 2021 00:39:08 +0200 +Subject: net: dsa: qca8k: add support for sgmii falling edge + +Add support for this in the qca8k driver. Also add support for SGMII +rx/tx clock falling edge. This is only present for pad0, pad5 and +pad6 have these bit reserved from Documentation. Add a comment that this +is hardcoded to PAD0 as qca8327/28/34/37 have an unique sgmii line and +setting falling in port0 applies to both configuration with sgmii used +for port0 or port6. + +Co-developed-by: Matthew Hagan +Signed-off-by: Matthew Hagan +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 63 +++++++++++++++++++++++++++++++++++++++++++++++++ + drivers/net/dsa/qca8k.h | 4 ++++ + 2 files changed, 67 insertions(+) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -978,6 +978,42 @@ qca8k_setup_mac_pwr_sel(struct qca8k_pri + } + + static int ++qca8k_parse_port_config(struct qca8k_priv *priv) ++{ ++ struct device_node *port_dn; ++ phy_interface_t mode; ++ struct dsa_port *dp; ++ int port, ret; ++ ++ /* We have 2 CPU port. Check them */ ++ for (port = 0; port < QCA8K_NUM_PORTS; port++) { ++ /* Skip every other port */ ++ if (port != 0 && port != 6) ++ continue; ++ ++ dp = dsa_to_port(priv->ds, port); ++ port_dn = dp->dn; ++ ++ if (!of_device_is_available(port_dn)) ++ continue; ++ ++ ret = of_get_phy_mode(port_dn, &mode); ++ if (ret) ++ continue; ++ ++ if (mode == PHY_INTERFACE_MODE_SGMII) { ++ if (of_property_read_bool(port_dn, "qca,sgmii-txclk-falling-edge")) ++ priv->sgmii_tx_clk_falling_edge = true; ++ ++ if (of_property_read_bool(port_dn, "qca,sgmii-rxclk-falling-edge")) ++ priv->sgmii_rx_clk_falling_edge = true; ++ } ++ } ++ ++ return 0; ++} ++ ++static int + qca8k_setup(struct dsa_switch *ds) + { + struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; +@@ -990,6 +1026,11 @@ qca8k_setup(struct dsa_switch *ds) + return -EINVAL; + } + ++ /* Parse CPU port config to be later used in phy_link mac_config */ ++ ret = qca8k_parse_port_config(priv); ++ if (ret) ++ return ret; ++ + mutex_init(&priv->reg_mutex); + + /* Start by setting up the register mapping */ +@@ -1274,6 +1315,28 @@ qca8k_phylink_mac_config(struct dsa_swit + } + + qca8k_write(priv, QCA8K_REG_SGMII_CTRL, val); ++ ++ /* For qca8327/qca8328/qca8334/qca8338 sgmii is unique and ++ * falling edge is set writing in the PORT0 PAD reg ++ */ ++ if (priv->switch_id == QCA8K_ID_QCA8327 || ++ priv->switch_id == QCA8K_ID_QCA8337) ++ reg = QCA8K_REG_PORT0_PAD_CTRL; ++ ++ val = 0; ++ ++ /* SGMII Clock phase configuration */ ++ if (priv->sgmii_rx_clk_falling_edge) ++ val |= QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE; ++ ++ if (priv->sgmii_tx_clk_falling_edge) ++ val |= QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE; ++ ++ if (val) ++ ret = qca8k_rmw(priv, reg, ++ QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE | ++ QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE, ++ val); + break; + default: + dev_err(ds->dev, "xMII mode %s not supported for port %d\n", +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -35,6 +35,8 @@ + #define QCA8K_MASK_CTRL_DEVICE_ID_MASK GENMASK(15, 8) + #define QCA8K_MASK_CTRL_DEVICE_ID(x) ((x) >> 8) + #define QCA8K_REG_PORT0_PAD_CTRL 0x004 ++#define QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE BIT(19) ++#define QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE BIT(18) + #define QCA8K_REG_PORT5_PAD_CTRL 0x008 + #define QCA8K_REG_PORT6_PAD_CTRL 0x00c + #define QCA8K_PORT_PAD_RGMII_EN BIT(26) +@@ -260,6 +262,8 @@ struct qca8k_priv { + u8 switch_revision; + u8 rgmii_tx_delay; + u8 rgmii_rx_delay; ++ bool sgmii_rx_clk_falling_edge; ++ bool sgmii_tx_clk_falling_edge; + bool legacy_phy_port_mapping; + struct regmap *regmap; + struct mii_bus *bus; diff --git a/target/linux/generic/backport-5.10/797-v5.16-04-dt-bindings-net-dsa-qca8k-Document-support-for-CPU-p.patch b/target/linux/generic/backport-5.10/797-v5.16-04-dt-bindings-net-dsa-qca8k-Document-support-for-CPU-p.patch new file mode 100644 index 0000000000..606ac0af3d --- /dev/null +++ b/target/linux/generic/backport-5.10/797-v5.16-04-dt-bindings-net-dsa-qca8k-Document-support-for-CPU-p.patch @@ -0,0 +1,29 @@ +From 731d613338ec6de482053ffa3f71be2325b0f8eb Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Thu, 14 Oct 2021 00:39:09 +0200 +Subject: dt-bindings: net: dsa: qca8k: Document support for CPU port 6 + +The switch now support CPU port to be set 6 instead of be hardcoded to +0. Document support for it and describe logic selection. + +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + Documentation/devicetree/bindings/net/dsa/qca8k.txt | 6 +++++- + 1 file changed, 5 insertions(+), 1 deletion(-) + +--- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt ++++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt +@@ -29,7 +29,11 @@ the mdio MASTER is used as communication + Don't use mixed external and internal mdio-bus configurations, as this is + not supported by the hardware. + +-The CPU port of this switch is always port 0. ++This switch support 2 CPU port. Normally and advised configuration is with ++CPU port set to port 0. It is also possible to set the CPU port to port 6 ++if the device requires it. The driver will configure the switch to the defined ++port. With both CPU port declared the first CPU port is selected as primary ++and the secondary CPU ignored. + + A CPU port node has the following optional node: + diff --git a/target/linux/generic/backport-5.10/797-v5.16-05-net-dsa-qca8k-add-support-for-cpu-port-6.patch b/target/linux/generic/backport-5.10/797-v5.16-05-net-dsa-qca8k-add-support-for-cpu-port-6.patch new file mode 100644 index 0000000000..320db8fa9f --- /dev/null +++ b/target/linux/generic/backport-5.10/797-v5.16-05-net-dsa-qca8k-add-support-for-cpu-port-6.patch @@ -0,0 +1,153 @@ +From 3fcf734aa482487df83cf8f18608438fcf59127f Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Thu, 14 Oct 2021 00:39:10 +0200 +Subject: net: dsa: qca8k: add support for cpu port 6 + +Currently CPU port is always hardcoded to port 0. This switch have 2 CPU +ports. The original intention of this driver seems to be use the +mac06_exchange bit to swap MAC0 with MAC6 in the strange configuration +where device have connected only the CPU port 6. To skip the +introduction of a new binding, rework the driver to address the +secondary CPU port as primary and drop any reference of hardcoded port. +With configuration of mac06 exchange, just skip the definition of port0 +and define the CPU port as a secondary. The driver will autoconfigure +the switch to use that as the primary CPU port. + +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 51 ++++++++++++++++++++++++++++++++++--------------- + drivers/net/dsa/qca8k.h | 2 -- + 2 files changed, 36 insertions(+), 17 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -977,6 +977,22 @@ qca8k_setup_mac_pwr_sel(struct qca8k_pri + return ret; + } + ++static int qca8k_find_cpu_port(struct dsa_switch *ds) ++{ ++ struct qca8k_priv *priv = ds->priv; ++ ++ /* Find the connected cpu port. Valid port are 0 or 6 */ ++ if (dsa_is_cpu_port(ds, 0)) ++ return 0; ++ ++ dev_dbg(priv->dev, "port 0 is not the CPU port. Checking port 6"); ++ ++ if (dsa_is_cpu_port(ds, 6)) ++ return 6; ++ ++ return -EINVAL; ++} ++ + static int + qca8k_parse_port_config(struct qca8k_priv *priv) + { +@@ -1017,13 +1033,13 @@ static int + qca8k_setup(struct dsa_switch *ds) + { + struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; +- int ret, i; ++ int cpu_port, ret, i; + u32 mask; + +- /* Make sure that port 0 is the cpu port */ +- if (!dsa_is_cpu_port(ds, 0)) { +- dev_err(priv->dev, "port 0 is not the CPU port"); +- return -EINVAL; ++ cpu_port = qca8k_find_cpu_port(ds); ++ if (cpu_port < 0) { ++ dev_err(priv->dev, "No cpu port configured in both cpu port0 and port6"); ++ return cpu_port; + } + + /* Parse CPU port config to be later used in phy_link mac_config */ +@@ -1065,7 +1081,7 @@ qca8k_setup(struct dsa_switch *ds) + dev_warn(priv->dev, "mib init failed"); + + /* Enable QCA header mode on the cpu port */ +- ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(QCA8K_CPU_PORT), ++ ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(cpu_port), + QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S | + QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S); + if (ret) { +@@ -1087,10 +1103,10 @@ qca8k_setup(struct dsa_switch *ds) + + /* Forward all unknown frames to CPU port for Linux processing */ + ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1, +- BIT(0) << QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S | +- BIT(0) << QCA8K_GLOBAL_FW_CTRL1_BC_DP_S | +- BIT(0) << QCA8K_GLOBAL_FW_CTRL1_MC_DP_S | +- BIT(0) << QCA8K_GLOBAL_FW_CTRL1_UC_DP_S); ++ BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S | ++ BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_BC_DP_S | ++ BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_MC_DP_S | ++ BIT(cpu_port) << QCA8K_GLOBAL_FW_CTRL1_UC_DP_S); + if (ret) + return ret; + +@@ -1098,7 +1114,7 @@ qca8k_setup(struct dsa_switch *ds) + for (i = 0; i < QCA8K_NUM_PORTS; i++) { + /* CPU port gets connected to all user ports of the switch */ + if (dsa_is_cpu_port(ds, i)) { +- ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(QCA8K_CPU_PORT), ++ ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(cpu_port), + QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds)); + if (ret) + return ret; +@@ -1110,7 +1126,7 @@ qca8k_setup(struct dsa_switch *ds) + + ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i), + QCA8K_PORT_LOOKUP_MEMBER, +- BIT(QCA8K_CPU_PORT)); ++ BIT(cpu_port)); + if (ret) + return ret; + +@@ -1616,9 +1632,12 @@ static int + qca8k_port_bridge_join(struct dsa_switch *ds, int port, struct net_device *br) + { + struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; +- int port_mask = BIT(QCA8K_CPU_PORT); ++ int port_mask, cpu_port; + int i, ret; + ++ cpu_port = dsa_to_port(ds, port)->cpu_dp->index; ++ port_mask = BIT(cpu_port); ++ + for (i = 1; i < QCA8K_NUM_PORTS; i++) { + if (dsa_to_port(ds, i)->bridge_dev != br) + continue; +@@ -1645,7 +1664,9 @@ static void + qca8k_port_bridge_leave(struct dsa_switch *ds, int port, struct net_device *br) + { + struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; +- int i; ++ int cpu_port, i; ++ ++ cpu_port = dsa_to_port(ds, port)->cpu_dp->index; + + for (i = 1; i < QCA8K_NUM_PORTS; i++) { + if (dsa_to_port(ds, i)->bridge_dev != br) +@@ -1662,7 +1683,7 @@ qca8k_port_bridge_leave(struct dsa_switc + * this port + */ + qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port), +- QCA8K_PORT_LOOKUP_MEMBER, BIT(QCA8K_CPU_PORT)); ++ QCA8K_PORT_LOOKUP_MEMBER, BIT(cpu_port)); + } + + static int +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -24,8 +24,6 @@ + + #define QCA8K_NUM_FDB_RECORDS 2048 + +-#define QCA8K_CPU_PORT 0 +- + #define QCA8K_PORT_VID_DEF 1 + + /* Global control registers */ diff --git a/target/linux/generic/backport-5.10/797-v5.16-06-net-dsa-qca8k-rework-rgmii-delay-logic-and-scan-for-.patch b/target/linux/generic/backport-5.10/797-v5.16-06-net-dsa-qca8k-rework-rgmii-delay-logic-and-scan-for-.patch new file mode 100644 index 0000000000..de201764f9 --- /dev/null +++ b/target/linux/generic/backport-5.10/797-v5.16-06-net-dsa-qca8k-rework-rgmii-delay-logic-and-scan-for-.patch @@ -0,0 +1,295 @@ +From 5654ec78dd7e64b1e04777b24007344329e6a63b Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Thu, 14 Oct 2021 00:39:11 +0200 +Subject: net: dsa: qca8k: rework rgmii delay logic and scan for cpu port 6 + +Future proof commit. This switch have 2 CPU ports and one valid +configuration is first CPU port set to sgmii and second CPU port set to +rgmii-id. The current implementation detects delay only for CPU port +zero set to rgmii and doesn't count any delay set in a secondary CPU +port. Drop the current delay scan function and move it to the sgmii +parser function to generalize and implicitly add support for secondary +CPU port set to rgmii-id. Introduce new logic where delay is enabled +also with internal delay binding declared and rgmii set as PHY mode. + +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 165 ++++++++++++++++++++++++------------------------ + drivers/net/dsa/qca8k.h | 10 ++- + 2 files changed, 89 insertions(+), 86 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -889,68 +889,6 @@ qca8k_setup_mdio_bus(struct qca8k_priv * + } + + static int +-qca8k_setup_of_rgmii_delay(struct qca8k_priv *priv) +-{ +- struct device_node *port_dn; +- phy_interface_t mode; +- struct dsa_port *dp; +- u32 val; +- +- /* CPU port is already checked */ +- dp = dsa_to_port(priv->ds, 0); +- +- port_dn = dp->dn; +- +- /* Check if port 0 is set to the correct type */ +- of_get_phy_mode(port_dn, &mode); +- if (mode != PHY_INTERFACE_MODE_RGMII_ID && +- mode != PHY_INTERFACE_MODE_RGMII_RXID && +- mode != PHY_INTERFACE_MODE_RGMII_TXID) { +- return 0; +- } +- +- switch (mode) { +- case PHY_INTERFACE_MODE_RGMII_ID: +- case PHY_INTERFACE_MODE_RGMII_RXID: +- if (of_property_read_u32(port_dn, "rx-internal-delay-ps", &val)) +- val = 2; +- else +- /* Switch regs accept value in ns, convert ps to ns */ +- val = val / 1000; +- +- if (val > QCA8K_MAX_DELAY) { +- dev_err(priv->dev, "rgmii rx delay is limited to a max value of 3ns, setting to the max value"); +- val = 3; +- } +- +- priv->rgmii_rx_delay = val; +- /* Stop here if we need to check only for rx delay */ +- if (mode != PHY_INTERFACE_MODE_RGMII_ID) +- break; +- +- fallthrough; +- case PHY_INTERFACE_MODE_RGMII_TXID: +- if (of_property_read_u32(port_dn, "tx-internal-delay-ps", &val)) +- val = 1; +- else +- /* Switch regs accept value in ns, convert ps to ns */ +- val = val / 1000; +- +- if (val > QCA8K_MAX_DELAY) { +- dev_err(priv->dev, "rgmii tx delay is limited to a max value of 3ns, setting to the max value"); +- val = 3; +- } +- +- priv->rgmii_tx_delay = val; +- break; +- default: +- return 0; +- } +- +- return 0; +-} +- +-static int + qca8k_setup_mac_pwr_sel(struct qca8k_priv *priv) + { + u32 mask = 0; +@@ -996,19 +934,21 @@ static int qca8k_find_cpu_port(struct ds + static int + qca8k_parse_port_config(struct qca8k_priv *priv) + { ++ int port, cpu_port_index = 0, ret; + struct device_node *port_dn; + phy_interface_t mode; + struct dsa_port *dp; +- int port, ret; ++ u32 delay; + + /* We have 2 CPU port. Check them */ +- for (port = 0; port < QCA8K_NUM_PORTS; port++) { ++ for (port = 0; port < QCA8K_NUM_PORTS && cpu_port_index < QCA8K_NUM_CPU_PORTS; port++) { + /* Skip every other port */ + if (port != 0 && port != 6) + continue; + + dp = dsa_to_port(priv->ds, port); + port_dn = dp->dn; ++ cpu_port_index++; + + if (!of_device_is_available(port_dn)) + continue; +@@ -1017,12 +957,54 @@ qca8k_parse_port_config(struct qca8k_pri + if (ret) + continue; + +- if (mode == PHY_INTERFACE_MODE_SGMII) { ++ switch (mode) { ++ case PHY_INTERFACE_MODE_RGMII: ++ case PHY_INTERFACE_MODE_RGMII_ID: ++ case PHY_INTERFACE_MODE_RGMII_TXID: ++ case PHY_INTERFACE_MODE_RGMII_RXID: ++ delay = 0; ++ ++ if (!of_property_read_u32(port_dn, "tx-internal-delay-ps", &delay)) ++ /* Switch regs accept value in ns, convert ps to ns */ ++ delay = delay / 1000; ++ else if (mode == PHY_INTERFACE_MODE_RGMII_ID || ++ mode == PHY_INTERFACE_MODE_RGMII_TXID) ++ delay = 1; ++ ++ if (delay > QCA8K_MAX_DELAY) { ++ dev_err(priv->dev, "rgmii tx delay is limited to a max value of 3ns, setting to the max value"); ++ delay = 3; ++ } ++ ++ priv->rgmii_tx_delay[cpu_port_index] = delay; ++ ++ delay = 0; ++ ++ if (!of_property_read_u32(port_dn, "rx-internal-delay-ps", &delay)) ++ /* Switch regs accept value in ns, convert ps to ns */ ++ delay = delay / 1000; ++ else if (mode == PHY_INTERFACE_MODE_RGMII_ID || ++ mode == PHY_INTERFACE_MODE_RGMII_RXID) ++ delay = 2; ++ ++ if (delay > QCA8K_MAX_DELAY) { ++ dev_err(priv->dev, "rgmii rx delay is limited to a max value of 3ns, setting to the max value"); ++ delay = 3; ++ } ++ ++ priv->rgmii_rx_delay[cpu_port_index] = delay; ++ ++ break; ++ case PHY_INTERFACE_MODE_SGMII: + if (of_property_read_bool(port_dn, "qca,sgmii-txclk-falling-edge")) + priv->sgmii_tx_clk_falling_edge = true; + + if (of_property_read_bool(port_dn, "qca,sgmii-rxclk-falling-edge")) + priv->sgmii_rx_clk_falling_edge = true; ++ ++ break; ++ default: ++ continue; + } + } + +@@ -1059,10 +1041,6 @@ qca8k_setup(struct dsa_switch *ds) + if (ret) + return ret; + +- ret = qca8k_setup_of_rgmii_delay(priv); +- if (ret) +- return ret; +- + ret = qca8k_setup_mac_pwr_sel(priv); + if (ret) + return ret; +@@ -1229,8 +1207,8 @@ qca8k_phylink_mac_config(struct dsa_swit + const struct phylink_link_state *state) + { + struct qca8k_priv *priv = ds->priv; +- u32 reg, val; +- int ret; ++ int cpu_port_index, ret; ++ u32 reg, val, delay; + + switch (port) { + case 0: /* 1st CPU port */ +@@ -1242,6 +1220,7 @@ qca8k_phylink_mac_config(struct dsa_swit + return; + + reg = QCA8K_REG_PORT0_PAD_CTRL; ++ cpu_port_index = QCA8K_CPU_PORT0; + break; + case 1: + case 2: +@@ -1260,6 +1239,7 @@ qca8k_phylink_mac_config(struct dsa_swit + return; + + reg = QCA8K_REG_PORT6_PAD_CTRL; ++ cpu_port_index = QCA8K_CPU_PORT6; + break; + default: + dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port); +@@ -1274,23 +1254,40 @@ qca8k_phylink_mac_config(struct dsa_swit + + switch (state->interface) { + case PHY_INTERFACE_MODE_RGMII: +- /* RGMII mode means no delay so don't enable the delay */ +- qca8k_write(priv, reg, QCA8K_PORT_PAD_RGMII_EN); +- break; + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_TXID: + case PHY_INTERFACE_MODE_RGMII_RXID: +- /* RGMII_ID needs internal delay. This is enabled through +- * PORT5_PAD_CTRL for all ports, rather than individual port +- * registers ++ val = QCA8K_PORT_PAD_RGMII_EN; ++ ++ /* Delay can be declared in 3 different way. ++ * Mode to rgmii and internal-delay standard binding defined ++ * rgmii-id or rgmii-tx/rx phy mode set. ++ * The parse logic set a delay different than 0 only when one ++ * of the 3 different way is used. In all other case delay is ++ * not enabled. With ID or TX/RXID delay is enabled and set ++ * to the default and recommended value. ++ */ ++ if (priv->rgmii_tx_delay[cpu_port_index]) { ++ delay = priv->rgmii_tx_delay[cpu_port_index]; ++ ++ val |= QCA8K_PORT_PAD_RGMII_TX_DELAY(delay) | ++ QCA8K_PORT_PAD_RGMII_TX_DELAY_EN; ++ } ++ ++ if (priv->rgmii_rx_delay[cpu_port_index]) { ++ delay = priv->rgmii_rx_delay[cpu_port_index]; ++ ++ val |= QCA8K_PORT_PAD_RGMII_RX_DELAY(delay) | ++ QCA8K_PORT_PAD_RGMII_RX_DELAY_EN; ++ } ++ ++ /* Set RGMII delay based on the selected values */ ++ qca8k_write(priv, reg, val); ++ ++ /* QCA8337 requires to set rgmii rx delay for all ports. ++ * This is enabled through PORT5_PAD_CTRL for all ports, ++ * rather than individual port registers. + */ +- qca8k_write(priv, reg, +- QCA8K_PORT_PAD_RGMII_EN | +- QCA8K_PORT_PAD_RGMII_TX_DELAY(priv->rgmii_tx_delay) | +- QCA8K_PORT_PAD_RGMII_RX_DELAY(priv->rgmii_rx_delay) | +- QCA8K_PORT_PAD_RGMII_TX_DELAY_EN | +- QCA8K_PORT_PAD_RGMII_RX_DELAY_EN); +- /* QCA8337 requires to set rgmii rx delay */ + if (priv->switch_id == QCA8K_ID_QCA8337) + qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL, + QCA8K_PORT_PAD_RGMII_RX_DELAY_EN); +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -13,6 +13,7 @@ + #include + + #define QCA8K_NUM_PORTS 7 ++#define QCA8K_NUM_CPU_PORTS 2 + #define QCA8K_MAX_MTU 9000 + + #define PHY_ID_QCA8327 0x004dd034 +@@ -255,13 +256,18 @@ struct qca8k_match_data { + u8 id; + }; + ++enum { ++ QCA8K_CPU_PORT0, ++ QCA8K_CPU_PORT6, ++}; ++ + struct qca8k_priv { + u8 switch_id; + u8 switch_revision; +- u8 rgmii_tx_delay; +- u8 rgmii_rx_delay; + bool sgmii_rx_clk_falling_edge; + bool sgmii_tx_clk_falling_edge; ++ u8 rgmii_rx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */ ++ u8 rgmii_tx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */ + bool legacy_phy_port_mapping; + struct regmap *regmap; + struct mii_bus *bus; diff --git a/target/linux/generic/backport-5.10/797-v5.16-07-dt-bindings-net-dsa-qca8k-Document-qca-sgmii-enable-.patch b/target/linux/generic/backport-5.10/797-v5.16-07-dt-bindings-net-dsa-qca8k-Document-qca-sgmii-enable-.patch new file mode 100644 index 0000000000..8abd264e79 --- /dev/null +++ b/target/linux/generic/backport-5.10/797-v5.16-07-dt-bindings-net-dsa-qca8k-Document-qca-sgmii-enable-.patch @@ -0,0 +1,33 @@ +From 13ad5ccc093ff448b99ac7e138e91e78796adb48 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Thu, 14 Oct 2021 00:39:12 +0200 +Subject: dt-bindings: net: dsa: qca8k: Document qca,sgmii-enable-pll + +Document qca,sgmii-enable-pll binding used in the CPU nodes to +enable SGMII PLL on MAC config. + +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + Documentation/devicetree/bindings/net/dsa/qca8k.txt | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +--- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt ++++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt +@@ -45,6 +45,16 @@ A CPU port node has the following option + Mostly used in qca8327 with CPU port 0 set to + sgmii. + - qca,sgmii-txclk-falling-edge: Set the transmit clock phase to falling edge. ++- qca,sgmii-enable-pll : For SGMII CPU port, explicitly enable PLL, TX and RX ++ chain along with Signal Detection. ++ This should NOT be enabled for qca8327. If enabled with ++ qca8327 the sgmii port won't correctly init and an err ++ is printed. ++ This can be required for qca8337 switch with revision 2. ++ A warning is displayed when used with revision greater ++ 2. ++ With CPU port set to sgmii and qca8337 it is advised ++ to set this unless a communication problem is observed. + + For QCA8K the 'fixed-link' sub-node supports only the following properties: + diff --git a/target/linux/generic/backport-5.10/797-v5.16-08-net-dsa-qca8k-add-explicit-SGMII-PLL-enable.patch b/target/linux/generic/backport-5.10/797-v5.16-08-net-dsa-qca8k-add-explicit-SGMII-PLL-enable.patch new file mode 100644 index 0000000000..2b5a84a1b0 --- /dev/null +++ b/target/linux/generic/backport-5.10/797-v5.16-08-net-dsa-qca8k-add-explicit-SGMII-PLL-enable.patch @@ -0,0 +1,65 @@ +From bbc4799e8bb6c397e3b3fec13de68e179f5db9ff Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Thu, 14 Oct 2021 00:39:13 +0200 +Subject: net: dsa: qca8k: add explicit SGMII PLL enable + +Support enabling PLL on the SGMII CPU port. Some device require this +special configuration or no traffic is transmitted and the switch +doesn't work at all. A dedicated binding is added to the CPU node +port to apply the correct reg on mac config. +Fail to correctly configure sgmii with qca8327 switch and warn if pll is +used on qca8337 with a revision greater than 1. + +Signed-off-by: Ansuel Smith +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 19 +++++++++++++++++-- + drivers/net/dsa/qca8k.h | 1 + + 2 files changed, 18 insertions(+), 2 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -1002,6 +1002,18 @@ qca8k_parse_port_config(struct qca8k_pri + if (of_property_read_bool(port_dn, "qca,sgmii-rxclk-falling-edge")) + priv->sgmii_rx_clk_falling_edge = true; + ++ if (of_property_read_bool(port_dn, "qca,sgmii-enable-pll")) { ++ priv->sgmii_enable_pll = true; ++ ++ if (priv->switch_id == QCA8K_ID_QCA8327) { ++ dev_err(priv->dev, "SGMII PLL should NOT be enabled for qca8327. Aborting enabling"); ++ priv->sgmii_enable_pll = false; ++ } ++ ++ if (priv->switch_revision < 2) ++ dev_warn(priv->dev, "SGMII PLL should NOT be enabled for qca8337 with revision 2 or more."); ++ } ++ + break; + default: + continue; +@@ -1312,8 +1324,11 @@ qca8k_phylink_mac_config(struct dsa_swit + if (ret) + return; + +- val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX | +- QCA8K_SGMII_EN_TX | QCA8K_SGMII_EN_SD; ++ val |= QCA8K_SGMII_EN_SD; ++ ++ if (priv->sgmii_enable_pll) ++ val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX | ++ QCA8K_SGMII_EN_TX; + + if (dsa_is_cpu_port(ds, port)) { + /* CPU port, we're talking to the CPU MAC, be a PHY */ +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -266,6 +266,7 @@ struct qca8k_priv { + u8 switch_revision; + bool sgmii_rx_clk_falling_edge; + bool sgmii_tx_clk_falling_edge; ++ bool sgmii_enable_pll; + u8 rgmii_rx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */ + u8 rgmii_tx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */ + bool legacy_phy_port_mapping; diff --git a/target/linux/generic/backport-5.10/797-v5.16-09-dt-bindings-net-dsa-qca8k-Document-qca-led-open-drai.patch b/target/linux/generic/backport-5.10/797-v5.16-09-dt-bindings-net-dsa-qca8k-Document-qca-led-open-drai.patch new file mode 100644 index 0000000000..38dc954e8c --- /dev/null +++ b/target/linux/generic/backport-5.10/797-v5.16-09-dt-bindings-net-dsa-qca8k-Document-qca-led-open-drai.patch @@ -0,0 +1,37 @@ +From 924087c5c3d41553700b0eb83ca2a53b91643dca Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Thu, 14 Oct 2021 00:39:14 +0200 +Subject: dt-bindings: net: dsa: qca8k: Document qca,led-open-drain binding + +Document new binding qca,ignore-power-on-sel used to ignore +power on strapping and use sw regs instead. +Document qca,led-open.drain to set led to open drain mode, the +qca,ignore-power-on-sel is mandatory with this enabled or an error will +be reported. + +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + Documentation/devicetree/bindings/net/dsa/qca8k.txt | 11 +++++++++++ + 1 file changed, 11 insertions(+) + +--- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt ++++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt +@@ -13,6 +13,17 @@ Required properties: + Optional properties: + + - reset-gpios: GPIO to be used to reset the whole device ++- qca,ignore-power-on-sel: Ignore power on pin strapping to configure led open ++ drain or eeprom presence. This is needed for broken ++ devices that have wrong configuration or when the oem ++ decided to not use pin strapping and fallback to sw ++ regs. ++- qca,led-open-drain: Set leds to open-drain mode. This requires the ++ qca,ignore-power-on-sel to be set or the driver will fail ++ to probe. This is needed if the oem doesn't use pin ++ strapping to set this mode and prefers to set it using sw ++ regs. The pin strapping related to led open drain mode is ++ the pin B68 for QCA832x and B49 for QCA833x + + Subnodes: + diff --git a/target/linux/generic/backport-5.10/797-v5.16-10-net-dsa-qca8k-add-support-for-pws-config-reg.patch b/target/linux/generic/backport-5.10/797-v5.16-10-net-dsa-qca8k-add-support-for-pws-config-reg.patch new file mode 100644 index 0000000000..aa5d92a4fd --- /dev/null +++ b/target/linux/generic/backport-5.10/797-v5.16-10-net-dsa-qca8k-add-support-for-pws-config-reg.patch @@ -0,0 +1,92 @@ +From 362bb238d8bf1470424214a8a5968d9c6cce68fa Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Thu, 14 Oct 2021 00:39:15 +0200 +Subject: net: dsa: qca8k: add support for pws config reg + +Some qca8327 switch require to force the ignore of power on sel +strapping. Some switch require to set the led open drain mode in regs +instead of using strapping. While most of the device implements this +using the correct way using pin strapping, there are still some broken +device that require to be set using sw regs. +Introduce a new binding and support these special configuration. +As led open drain require to ignore pin strapping to work, the probe +fails with EINVAL error with incorrect configuration. + +Signed-off-by: Ansuel Smith +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 39 +++++++++++++++++++++++++++++++++++++++ + drivers/net/dsa/qca8k.h | 6 ++++++ + 2 files changed, 45 insertions(+) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -932,6 +932,41 @@ static int qca8k_find_cpu_port(struct ds + } + + static int ++qca8k_setup_of_pws_reg(struct qca8k_priv *priv) ++{ ++ struct device_node *node = priv->dev->of_node; ++ u32 val = 0; ++ int ret; ++ ++ /* QCA8327 require to set to the correct mode. ++ * His bigger brother QCA8328 have the 172 pin layout. ++ * Should be applied by default but we set this just to make sure. ++ */ ++ if (priv->switch_id == QCA8K_ID_QCA8327) { ++ ret = qca8k_rmw(priv, QCA8K_REG_PWS, QCA8327_PWS_PACKAGE148_EN, ++ QCA8327_PWS_PACKAGE148_EN); ++ if (ret) ++ return ret; ++ } ++ ++ if (of_property_read_bool(node, "qca,ignore-power-on-sel")) ++ val |= QCA8K_PWS_POWER_ON_SEL; ++ ++ if (of_property_read_bool(node, "qca,led-open-drain")) { ++ if (!(val & QCA8K_PWS_POWER_ON_SEL)) { ++ dev_err(priv->dev, "qca,led-open-drain require qca,ignore-power-on-sel to be set."); ++ return -EINVAL; ++ } ++ ++ val |= QCA8K_PWS_LED_OPEN_EN_CSR; ++ } ++ ++ return qca8k_rmw(priv, QCA8K_REG_PWS, ++ QCA8K_PWS_LED_OPEN_EN_CSR | QCA8K_PWS_POWER_ON_SEL, ++ val); ++} ++ ++static int + qca8k_parse_port_config(struct qca8k_priv *priv) + { + int port, cpu_port_index = 0, ret; +@@ -1053,6 +1088,10 @@ qca8k_setup(struct dsa_switch *ds) + if (ret) + return ret; + ++ ret = qca8k_setup_of_pws_reg(priv); ++ if (ret) ++ return ret; ++ + ret = qca8k_setup_mac_pwr_sel(priv); + if (ret) + return ret; +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -46,6 +46,12 @@ + #define QCA8K_MAX_DELAY 3 + #define QCA8K_PORT_PAD_SGMII_EN BIT(7) + #define QCA8K_REG_PWS 0x010 ++#define QCA8K_PWS_POWER_ON_SEL BIT(31) ++/* This reg is only valid for QCA832x and toggle the package ++ * type from 176 pin (by default) to 148 pin used on QCA8327 ++ */ ++#define QCA8327_PWS_PACKAGE148_EN BIT(30) ++#define QCA8K_PWS_LED_OPEN_EN_CSR BIT(24) + #define QCA8K_PWS_SERDES_AEN_DIS BIT(7) + #define QCA8K_REG_MODULE_EN 0x030 + #define QCA8K_MODULE_EN_MIB BIT(0) diff --git a/target/linux/generic/backport-5.10/797-v5.16-11-dt-bindings-net-dsa-qca8k-document-support-for-qca83.patch b/target/linux/generic/backport-5.10/797-v5.16-11-dt-bindings-net-dsa-qca8k-document-support-for-qca83.patch new file mode 100644 index 0000000000..1bfb00c5b2 --- /dev/null +++ b/target/linux/generic/backport-5.10/797-v5.16-11-dt-bindings-net-dsa-qca8k-document-support-for-qca83.patch @@ -0,0 +1,32 @@ +From ed7988d77fbfb79366b68f9e7fa60a6080da23d4 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Thu, 14 Oct 2021 00:39:16 +0200 +Subject: dt-bindings: net: dsa: qca8k: document support for qca8328 + +QCA8328 is the bigger brother of qca8327. Document the new compatible +binding and add some information to understand the various switch +compatible. + +Signed-off-by: Ansuel Smith +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + Documentation/devicetree/bindings/net/dsa/qca8k.txt | 7 ++++--- + 1 file changed, 4 insertions(+), 3 deletions(-) + +--- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt ++++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt +@@ -3,9 +3,10 @@ + Required properties: + + - compatible: should be one of: +- "qca,qca8327" +- "qca,qca8334" +- "qca,qca8337" ++ "qca,qca8328": referenced as AR8328(N)-AK1(A/B) QFN 176 pin package ++ "qca,qca8327": referenced as AR8327(N)-AL1A DR-QFN 148 pin package ++ "qca,qca8334": referenced as QCA8334-AL3C QFN 88 pin package ++ "qca,qca8337": referenced as QCA8337N-AL3(B/C) DR-QFN 148 pin package + + - #size-cells: must be 0 + - #address-cells: must be 1 diff --git a/target/linux/generic/backport-5.10/797-v5.16-12-net-dsa-qca8k-add-support-for-QCA8328.patch b/target/linux/generic/backport-5.10/797-v5.16-12-net-dsa-qca8k-add-support-for-QCA8328.patch new file mode 100644 index 0000000000..6e118f5a14 --- /dev/null +++ b/target/linux/generic/backport-5.10/797-v5.16-12-net-dsa-qca8k-add-support-for-QCA8328.patch @@ -0,0 +1,78 @@ +From f477d1c8bdbef4f400718238e350f16f521d2a3e Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Thu, 14 Oct 2021 00:39:17 +0200 +Subject: net: dsa: qca8k: add support for QCA8328 + +QCA8328 switch is the bigger brother of the qca8327. Same regs different +chip. Change the function to set the correct pin layout and introduce a +new match_data to differentiate the 2 switch as they have the same ID +and their internal PHY have the same ID. + +Signed-off-by: Ansuel Smith +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 19 ++++++++++++++++--- + drivers/net/dsa/qca8k.h | 1 + + 2 files changed, 17 insertions(+), 3 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -935,6 +935,7 @@ static int + qca8k_setup_of_pws_reg(struct qca8k_priv *priv) + { + struct device_node *node = priv->dev->of_node; ++ const struct qca8k_match_data *data; + u32 val = 0; + int ret; + +@@ -943,8 +944,14 @@ qca8k_setup_of_pws_reg(struct qca8k_priv + * Should be applied by default but we set this just to make sure. + */ + if (priv->switch_id == QCA8K_ID_QCA8327) { ++ data = of_device_get_match_data(priv->dev); ++ ++ /* Set the correct package of 148 pin for QCA8327 */ ++ if (data->reduced_package) ++ val |= QCA8327_PWS_PACKAGE148_EN; ++ + ret = qca8k_rmw(priv, QCA8K_REG_PWS, QCA8327_PWS_PACKAGE148_EN, +- QCA8327_PWS_PACKAGE148_EN); ++ val); + if (ret) + return ret; + } +@@ -2098,7 +2105,12 @@ static int qca8k_resume(struct device *d + static SIMPLE_DEV_PM_OPS(qca8k_pm_ops, + qca8k_suspend, qca8k_resume); + +-static const struct qca8k_match_data qca832x = { ++static const struct qca8k_match_data qca8327 = { ++ .id = QCA8K_ID_QCA8327, ++ .reduced_package = true, ++}; ++ ++static const struct qca8k_match_data qca8328 = { + .id = QCA8K_ID_QCA8327, + }; + +@@ -2107,7 +2119,8 @@ static const struct qca8k_match_data qca + }; + + static const struct of_device_id qca8k_of_match[] = { +- { .compatible = "qca,qca8327", .data = &qca832x }, ++ { .compatible = "qca,qca8327", .data = &qca8327 }, ++ { .compatible = "qca,qca8328", .data = &qca8328 }, + { .compatible = "qca,qca8334", .data = &qca833x }, + { .compatible = "qca,qca8337", .data = &qca833x }, + { /* sentinel */ }, +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -260,6 +260,7 @@ struct ar8xxx_port_status { + + struct qca8k_match_data { + u8 id; ++ bool reduced_package; + }; + + enum { diff --git a/target/linux/generic/backport-5.10/797-v5.16-13-net-dsa-qca8k-set-internal-delay-also-for-sgmii.patch b/target/linux/generic/backport-5.10/797-v5.16-13-net-dsa-qca8k-set-internal-delay-also-for-sgmii.patch new file mode 100644 index 0000000000..27f94dca02 --- /dev/null +++ b/target/linux/generic/backport-5.10/797-v5.16-13-net-dsa-qca8k-set-internal-delay-also-for-sgmii.patch @@ -0,0 +1,159 @@ +From cef08115846e581f80ff99abf7bf218da1840616 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Thu, 14 Oct 2021 00:39:18 +0200 +Subject: net: dsa: qca8k: set internal delay also for sgmii + +QCA original code report port instability and sa that SGMII also require +to set internal delay. Generalize the rgmii delay function and apply the +advised value if they are not defined in DT. + +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 88 +++++++++++++++++++++++++++++++++---------------- + drivers/net/dsa/qca8k.h | 2 ++ + 2 files changed, 62 insertions(+), 28 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -1004,6 +1004,7 @@ qca8k_parse_port_config(struct qca8k_pri + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_TXID: + case PHY_INTERFACE_MODE_RGMII_RXID: ++ case PHY_INTERFACE_MODE_SGMII: + delay = 0; + + if (!of_property_read_u32(port_dn, "tx-internal-delay-ps", &delay)) +@@ -1036,8 +1037,13 @@ qca8k_parse_port_config(struct qca8k_pri + + priv->rgmii_rx_delay[cpu_port_index] = delay; + +- break; +- case PHY_INTERFACE_MODE_SGMII: ++ /* Skip sgmii parsing for rgmii* mode */ ++ if (mode == PHY_INTERFACE_MODE_RGMII || ++ mode == PHY_INTERFACE_MODE_RGMII_ID || ++ mode == PHY_INTERFACE_MODE_RGMII_TXID || ++ mode == PHY_INTERFACE_MODE_RGMII_RXID) ++ break; ++ + if (of_property_read_bool(port_dn, "qca,sgmii-txclk-falling-edge")) + priv->sgmii_tx_clk_falling_edge = true; + +@@ -1261,12 +1267,53 @@ qca8k_setup(struct dsa_switch *ds) + } + + static void ++qca8k_mac_config_setup_internal_delay(struct qca8k_priv *priv, int cpu_port_index, ++ u32 reg) ++{ ++ u32 delay, val = 0; ++ int ret; ++ ++ /* Delay can be declared in 3 different way. ++ * Mode to rgmii and internal-delay standard binding defined ++ * rgmii-id or rgmii-tx/rx phy mode set. ++ * The parse logic set a delay different than 0 only when one ++ * of the 3 different way is used. In all other case delay is ++ * not enabled. With ID or TX/RXID delay is enabled and set ++ * to the default and recommended value. ++ */ ++ if (priv->rgmii_tx_delay[cpu_port_index]) { ++ delay = priv->rgmii_tx_delay[cpu_port_index]; ++ ++ val |= QCA8K_PORT_PAD_RGMII_TX_DELAY(delay) | ++ QCA8K_PORT_PAD_RGMII_TX_DELAY_EN; ++ } ++ ++ if (priv->rgmii_rx_delay[cpu_port_index]) { ++ delay = priv->rgmii_rx_delay[cpu_port_index]; ++ ++ val |= QCA8K_PORT_PAD_RGMII_RX_DELAY(delay) | ++ QCA8K_PORT_PAD_RGMII_RX_DELAY_EN; ++ } ++ ++ /* Set RGMII delay based on the selected values */ ++ ret = qca8k_rmw(priv, reg, ++ QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK | ++ QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK | ++ QCA8K_PORT_PAD_RGMII_TX_DELAY_EN | ++ QCA8K_PORT_PAD_RGMII_RX_DELAY_EN, ++ val); ++ if (ret) ++ dev_err(priv->dev, "Failed to set internal delay for CPU port%d", ++ cpu_port_index == QCA8K_CPU_PORT0 ? 0 : 6); ++} ++ ++static void + qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode, + const struct phylink_link_state *state) + { + struct qca8k_priv *priv = ds->priv; + int cpu_port_index, ret; +- u32 reg, val, delay; ++ u32 reg, val; + + switch (port) { + case 0: /* 1st CPU port */ +@@ -1315,32 +1362,10 @@ qca8k_phylink_mac_config(struct dsa_swit + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_TXID: + case PHY_INTERFACE_MODE_RGMII_RXID: +- val = QCA8K_PORT_PAD_RGMII_EN; +- +- /* Delay can be declared in 3 different way. +- * Mode to rgmii and internal-delay standard binding defined +- * rgmii-id or rgmii-tx/rx phy mode set. +- * The parse logic set a delay different than 0 only when one +- * of the 3 different way is used. In all other case delay is +- * not enabled. With ID or TX/RXID delay is enabled and set +- * to the default and recommended value. +- */ +- if (priv->rgmii_tx_delay[cpu_port_index]) { +- delay = priv->rgmii_tx_delay[cpu_port_index]; +- +- val |= QCA8K_PORT_PAD_RGMII_TX_DELAY(delay) | +- QCA8K_PORT_PAD_RGMII_TX_DELAY_EN; +- } +- +- if (priv->rgmii_rx_delay[cpu_port_index]) { +- delay = priv->rgmii_rx_delay[cpu_port_index]; +- +- val |= QCA8K_PORT_PAD_RGMII_RX_DELAY(delay) | +- QCA8K_PORT_PAD_RGMII_RX_DELAY_EN; +- } ++ qca8k_write(priv, reg, QCA8K_PORT_PAD_RGMII_EN); + +- /* Set RGMII delay based on the selected values */ +- qca8k_write(priv, reg, val); ++ /* Configure rgmii delay */ ++ qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg); + + /* QCA8337 requires to set rgmii rx delay for all ports. + * This is enabled through PORT5_PAD_CTRL for all ports, +@@ -1411,6 +1436,13 @@ qca8k_phylink_mac_config(struct dsa_swit + QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE | + QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE, + val); ++ ++ /* From original code is reported port instability as SGMII also ++ * require delay set. Apply advised values here or take them from DT. ++ */ ++ if (state->interface == PHY_INTERFACE_MODE_SGMII) ++ qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg); ++ + break; + default: + dev_err(ds->dev, "xMII mode %s not supported for port %d\n", +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -39,7 +39,9 @@ + #define QCA8K_REG_PORT5_PAD_CTRL 0x008 + #define QCA8K_REG_PORT6_PAD_CTRL 0x00c + #define QCA8K_PORT_PAD_RGMII_EN BIT(26) ++#define QCA8K_PORT_PAD_RGMII_TX_DELAY_MASK GENMASK(23, 22) + #define QCA8K_PORT_PAD_RGMII_TX_DELAY(x) ((x) << 22) ++#define QCA8K_PORT_PAD_RGMII_RX_DELAY_MASK GENMASK(21, 20) + #define QCA8K_PORT_PAD_RGMII_RX_DELAY(x) ((x) << 20) + #define QCA8K_PORT_PAD_RGMII_TX_DELAY_EN BIT(25) + #define QCA8K_PORT_PAD_RGMII_RX_DELAY_EN BIT(24) diff --git a/target/linux/generic/backport-5.10/797-v5.16-14-net-dsa-qca8k-move-port-config-to-dedicated-struct.patch b/target/linux/generic/backport-5.10/797-v5.16-14-net-dsa-qca8k-move-port-config-to-dedicated-struct.patch new file mode 100644 index 0000000000..b991798c87 --- /dev/null +++ b/target/linux/generic/backport-5.10/797-v5.16-14-net-dsa-qca8k-move-port-config-to-dedicated-struct.patch @@ -0,0 +1,124 @@ +From fd0bb28c547f7c8affb1691128cece38f5b626a1 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Thu, 14 Oct 2021 00:39:19 +0200 +Subject: net: dsa: qca8k: move port config to dedicated struct + +Move ports related config to dedicated struct to keep things organized. + +Signed-off-by: Ansuel Smith +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + drivers/net/dsa/qca8k.c | 26 +++++++++++++------------- + drivers/net/dsa/qca8k.h | 10 +++++++--- + 2 files changed, 20 insertions(+), 16 deletions(-) + +--- a/drivers/net/dsa/qca8k.c ++++ b/drivers/net/dsa/qca8k.c +@@ -1019,7 +1019,7 @@ qca8k_parse_port_config(struct qca8k_pri + delay = 3; + } + +- priv->rgmii_tx_delay[cpu_port_index] = delay; ++ priv->ports_config.rgmii_tx_delay[cpu_port_index] = delay; + + delay = 0; + +@@ -1035,7 +1035,7 @@ qca8k_parse_port_config(struct qca8k_pri + delay = 3; + } + +- priv->rgmii_rx_delay[cpu_port_index] = delay; ++ priv->ports_config.rgmii_rx_delay[cpu_port_index] = delay; + + /* Skip sgmii parsing for rgmii* mode */ + if (mode == PHY_INTERFACE_MODE_RGMII || +@@ -1045,17 +1045,17 @@ qca8k_parse_port_config(struct qca8k_pri + break; + + if (of_property_read_bool(port_dn, "qca,sgmii-txclk-falling-edge")) +- priv->sgmii_tx_clk_falling_edge = true; ++ priv->ports_config.sgmii_tx_clk_falling_edge = true; + + if (of_property_read_bool(port_dn, "qca,sgmii-rxclk-falling-edge")) +- priv->sgmii_rx_clk_falling_edge = true; ++ priv->ports_config.sgmii_rx_clk_falling_edge = true; + + if (of_property_read_bool(port_dn, "qca,sgmii-enable-pll")) { +- priv->sgmii_enable_pll = true; ++ priv->ports_config.sgmii_enable_pll = true; + + if (priv->switch_id == QCA8K_ID_QCA8327) { + dev_err(priv->dev, "SGMII PLL should NOT be enabled for qca8327. Aborting enabling"); +- priv->sgmii_enable_pll = false; ++ priv->ports_config.sgmii_enable_pll = false; + } + + if (priv->switch_revision < 2) +@@ -1281,15 +1281,15 @@ qca8k_mac_config_setup_internal_delay(st + * not enabled. With ID or TX/RXID delay is enabled and set + * to the default and recommended value. + */ +- if (priv->rgmii_tx_delay[cpu_port_index]) { +- delay = priv->rgmii_tx_delay[cpu_port_index]; ++ if (priv->ports_config.rgmii_tx_delay[cpu_port_index]) { ++ delay = priv->ports_config.rgmii_tx_delay[cpu_port_index]; + + val |= QCA8K_PORT_PAD_RGMII_TX_DELAY(delay) | + QCA8K_PORT_PAD_RGMII_TX_DELAY_EN; + } + +- if (priv->rgmii_rx_delay[cpu_port_index]) { +- delay = priv->rgmii_rx_delay[cpu_port_index]; ++ if (priv->ports_config.rgmii_rx_delay[cpu_port_index]) { ++ delay = priv->ports_config.rgmii_rx_delay[cpu_port_index]; + + val |= QCA8K_PORT_PAD_RGMII_RX_DELAY(delay) | + QCA8K_PORT_PAD_RGMII_RX_DELAY_EN; +@@ -1397,7 +1397,7 @@ qca8k_phylink_mac_config(struct dsa_swit + + val |= QCA8K_SGMII_EN_SD; + +- if (priv->sgmii_enable_pll) ++ if (priv->ports_config.sgmii_enable_pll) + val |= QCA8K_SGMII_EN_PLL | QCA8K_SGMII_EN_RX | + QCA8K_SGMII_EN_TX; + +@@ -1425,10 +1425,10 @@ qca8k_phylink_mac_config(struct dsa_swit + val = 0; + + /* SGMII Clock phase configuration */ +- if (priv->sgmii_rx_clk_falling_edge) ++ if (priv->ports_config.sgmii_rx_clk_falling_edge) + val |= QCA8K_PORT0_PAD_SGMII_RXCLK_FALLING_EDGE; + +- if (priv->sgmii_tx_clk_falling_edge) ++ if (priv->ports_config.sgmii_tx_clk_falling_edge) + val |= QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE; + + if (val) +--- a/drivers/net/dsa/qca8k.h ++++ b/drivers/net/dsa/qca8k.h +@@ -270,15 +270,19 @@ enum { + QCA8K_CPU_PORT6, + }; + +-struct qca8k_priv { +- u8 switch_id; +- u8 switch_revision; ++struct qca8k_ports_config { + bool sgmii_rx_clk_falling_edge; + bool sgmii_tx_clk_falling_edge; + bool sgmii_enable_pll; + u8 rgmii_rx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */ + u8 rgmii_tx_delay[QCA8K_NUM_CPU_PORTS]; /* 0: CPU port0, 1: CPU port6 */ ++}; ++ ++struct qca8k_priv { ++ u8 switch_id; ++ u8 switch_revision; + bool legacy_phy_port_mapping; ++ struct qca8k_ports_config ports_config; + struct regmap *regmap; + struct mii_bus *bus; + struct ar8xxx_port_status port_sts[QCA8K_NUM_PORTS]; diff --git a/target/linux/generic/backport-5.10/797-v5.16-15-dt-bindings-net-ipq8064-mdio-fix-warning-with-new-qc.patch b/target/linux/generic/backport-5.10/797-v5.16-15-dt-bindings-net-ipq8064-mdio-fix-warning-with-new-qc.patch new file mode 100644 index 0000000000..f7cb514176 --- /dev/null +++ b/target/linux/generic/backport-5.10/797-v5.16-15-dt-bindings-net-ipq8064-mdio-fix-warning-with-new-qc.patch @@ -0,0 +1,26 @@ +From e52073a8e3086046a098b8a7cbeb282ff0cdb424 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith +Date: Thu, 14 Oct 2021 00:39:20 +0200 +Subject: dt-bindings: net: ipq8064-mdio: fix warning with new qca8k switch + +Fix warning now that we have qca8k switch Documentation using yaml. + +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml | 5 ++++- + 1 file changed, 4 insertions(+), 1 deletion(-) + +--- a/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml ++++ b/Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml +@@ -51,6 +51,9 @@ examples: + switch@10 { + compatible = "qca,qca8337"; + reg = <0x10>; +- /* ... */ ++ ++ ports { ++ /* ... */ ++ }; + }; + }; diff --git a/target/linux/generic/backport-5.10/797-v5.16-16-dt-bindings-net-dsa-qca8k-convert-to-YAML-schema.patch b/target/linux/generic/backport-5.10/797-v5.16-16-dt-bindings-net-dsa-qca8k-convert-to-YAML-schema.patch new file mode 100644 index 0000000000..b9bce97dd3 --- /dev/null +++ b/target/linux/generic/backport-5.10/797-v5.16-16-dt-bindings-net-dsa-qca8k-convert-to-YAML-schema.patch @@ -0,0 +1,631 @@ +From d291fbb8245d5ba04979fed85575860a5cea7196 Mon Sep 17 00:00:00 2001 +From: Matthew Hagan +Date: Thu, 14 Oct 2021 00:39:21 +0200 +Subject: dt-bindings: net: dsa: qca8k: convert to YAML schema + +Convert the qca8k bindings to YAML format. + +Signed-off-by: Matthew Hagan +Co-developed-by: Ansuel Smith +Signed-off-by: Ansuel Smith +Signed-off-by: David S. Miller +--- + .../devicetree/bindings/net/dsa/qca8k.txt | 245 -------------- + .../devicetree/bindings/net/dsa/qca8k.yaml | 362 +++++++++++++++++++++ + 2 files changed, 362 insertions(+), 245 deletions(-) + delete mode 100644 Documentation/devicetree/bindings/net/dsa/qca8k.txt + create mode 100644 Documentation/devicetree/bindings/net/dsa/qca8k.yaml + +--- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt ++++ /dev/null +@@ -1,245 +0,0 @@ +-* Qualcomm Atheros QCA8xxx switch family +- +-Required properties: +- +-- compatible: should be one of: +- "qca,qca8328": referenced as AR8328(N)-AK1(A/B) QFN 176 pin package +- "qca,qca8327": referenced as AR8327(N)-AL1A DR-QFN 148 pin package +- "qca,qca8334": referenced as QCA8334-AL3C QFN 88 pin package +- "qca,qca8337": referenced as QCA8337N-AL3(B/C) DR-QFN 148 pin package +- +-- #size-cells: must be 0 +-- #address-cells: must be 1 +- +-Optional properties: +- +-- reset-gpios: GPIO to be used to reset the whole device +-- qca,ignore-power-on-sel: Ignore power on pin strapping to configure led open +- drain or eeprom presence. This is needed for broken +- devices that have wrong configuration or when the oem +- decided to not use pin strapping and fallback to sw +- regs. +-- qca,led-open-drain: Set leds to open-drain mode. This requires the +- qca,ignore-power-on-sel to be set or the driver will fail +- to probe. This is needed if the oem doesn't use pin +- strapping to set this mode and prefers to set it using sw +- regs. The pin strapping related to led open drain mode is +- the pin B68 for QCA832x and B49 for QCA833x +- +-Subnodes: +- +-The integrated switch subnode should be specified according to the binding +-described in dsa/dsa.txt. If the QCA8K switch is connect to a SoC's external +-mdio-bus each subnode describing a port needs to have a valid phandle +-referencing the internal PHY it is connected to. This is because there's no +-N:N mapping of port and PHY id. +-To declare the internal mdio-bus configuration, declare a mdio node in the +-switch node and declare the phandle for the port referencing the internal +-PHY is connected to. In this config a internal mdio-bus is registered and +-the mdio MASTER is used as communication. +- +-Don't use mixed external and internal mdio-bus configurations, as this is +-not supported by the hardware. +- +-This switch support 2 CPU port. Normally and advised configuration is with +-CPU port set to port 0. It is also possible to set the CPU port to port 6 +-if the device requires it. The driver will configure the switch to the defined +-port. With both CPU port declared the first CPU port is selected as primary +-and the secondary CPU ignored. +- +-A CPU port node has the following optional node: +- +-- fixed-link : Fixed-link subnode describing a link to a non-MDIO +- managed entity. See +- Documentation/devicetree/bindings/net/fixed-link.txt +- for details. +-- qca,sgmii-rxclk-falling-edge: Set the receive clock phase to falling edge. +- Mostly used in qca8327 with CPU port 0 set to +- sgmii. +-- qca,sgmii-txclk-falling-edge: Set the transmit clock phase to falling edge. +-- qca,sgmii-enable-pll : For SGMII CPU port, explicitly enable PLL, TX and RX +- chain along with Signal Detection. +- This should NOT be enabled for qca8327. If enabled with +- qca8327 the sgmii port won't correctly init and an err +- is printed. +- This can be required for qca8337 switch with revision 2. +- A warning is displayed when used with revision greater +- 2. +- With CPU port set to sgmii and qca8337 it is advised +- to set this unless a communication problem is observed. +- +-For QCA8K the 'fixed-link' sub-node supports only the following properties: +- +-- 'speed' (integer, mandatory), to indicate the link speed. Accepted +- values are 10, 100 and 1000 +-- 'full-duplex' (boolean, optional), to indicate that full duplex is +- used. When absent, half duplex is assumed. +- +-Examples: +- +-for the external mdio-bus configuration: +- +- &mdio0 { +- phy_port1: phy@0 { +- reg = <0>; +- }; +- +- phy_port2: phy@1 { +- reg = <1>; +- }; +- +- phy_port3: phy@2 { +- reg = <2>; +- }; +- +- phy_port4: phy@3 { +- reg = <3>; +- }; +- +- phy_port5: phy@4 { +- reg = <4>; +- }; +- +- switch@10 { +- compatible = "qca,qca8337"; +- #address-cells = <1>; +- #size-cells = <0>; +- +- reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>; +- reg = <0x10>; +- +- ports { +- #address-cells = <1>; +- #size-cells = <0>; +- port@0 { +- reg = <0>; +- label = "cpu"; +- ethernet = <&gmac1>; +- phy-mode = "rgmii"; +- fixed-link { +- speed = 1000; +- full-duplex; +- }; +- }; +- +- port@1 { +- reg = <1>; +- label = "lan1"; +- phy-handle = <&phy_port1>; +- }; +- +- port@2 { +- reg = <2>; +- label = "lan2"; +- phy-handle = <&phy_port2>; +- }; +- +- port@3 { +- reg = <3>; +- label = "lan3"; +- phy-handle = <&phy_port3>; +- }; +- +- port@4 { +- reg = <4>; +- label = "lan4"; +- phy-handle = <&phy_port4>; +- }; +- +- port@5 { +- reg = <5>; +- label = "wan"; +- phy-handle = <&phy_port5>; +- }; +- }; +- }; +- }; +- +-for the internal master mdio-bus configuration: +- +- &mdio0 { +- switch@10 { +- compatible = "qca,qca8337"; +- #address-cells = <1>; +- #size-cells = <0>; +- +- reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>; +- reg = <0x10>; +- +- ports { +- #address-cells = <1>; +- #size-cells = <0>; +- +- port@0 { +- reg = <0>; +- label = "cpu"; +- ethernet = <&gmac1>; +- phy-mode = "rgmii"; +- fixed-link { +- speed = 1000; +- full-duplex; +- }; +- }; +- +- port@1 { +- reg = <1>; +- label = "lan1"; +- phy-mode = "internal"; +- phy-handle = <&phy_port1>; +- }; +- +- port@2 { +- reg = <2>; +- label = "lan2"; +- phy-mode = "internal"; +- phy-handle = <&phy_port2>; +- }; +- +- port@3 { +- reg = <3>; +- label = "lan3"; +- phy-mode = "internal"; +- phy-handle = <&phy_port3>; +- }; +- +- port@4 { +- reg = <4>; +- label = "lan4"; +- phy-mode = "internal"; +- phy-handle = <&phy_port4>; +- }; +- +- port@5 { +- reg = <5>; +- label = "wan"; +- phy-mode = "internal"; +- phy-handle = <&phy_port5>; +- }; +- }; +- +- mdio { +- #address-cells = <1>; +- #size-cells = <0>; +- +- phy_port1: phy@0 { +- reg = <0>; +- }; +- +- phy_port2: phy@1 { +- reg = <1>; +- }; +- +- phy_port3: phy@2 { +- reg = <2>; +- }; +- +- phy_port4: phy@3 { +- reg = <3>; +- }; +- +- phy_port5: phy@4 { +- reg = <4>; +- }; +- }; +- }; +- }; +--- /dev/null ++++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml +@@ -0,0 +1,362 @@ ++# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/net/dsa/qca8k.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Qualcomm Atheros QCA83xx switch family ++ ++maintainers: ++ - John Crispin ++ ++description: ++ If the QCA8K switch is connect to an SoC's external mdio-bus, each subnode ++ describing a port needs to have a valid phandle referencing the internal PHY ++ it is connected to. This is because there is no N:N mapping of port and PHY ++ ID. To declare the internal mdio-bus configuration, declare an MDIO node in ++ the switch node and declare the phandle for the port, referencing the internal ++ PHY it is connected to. In this config, an internal mdio-bus is registered and ++ the MDIO master is used for communication. Mixed external and internal ++ mdio-bus configurations are not supported by the hardware. ++ ++properties: ++ compatible: ++ oneOf: ++ - enum: ++ - qca,qca8327 ++ - qca,qca8328 ++ - qca,qca8334 ++ - qca,qca8337 ++ description: | ++ qca,qca8328: referenced as AR8328(N)-AK1(A/B) QFN 176 pin package ++ qca,qca8327: referenced as AR8327(N)-AL1A DR-QFN 148 pin package ++ qca,qca8334: referenced as QCA8334-AL3C QFN 88 pin package ++ qca,qca8337: referenced as QCA8337N-AL3(B/C) DR-QFN 148 pin package ++ ++ reg: ++ maxItems: 1 ++ ++ reset-gpios: ++ description: ++ GPIO to be used to reset the whole device ++ maxItems: 1 ++ ++ qca,ignore-power-on-sel: ++ $ref: /schemas/types.yaml#/definitions/flag ++ description: ++ Ignore power-on pin strapping to configure LED open-drain or EEPROM ++ presence. This is needed for devices with incorrect configuration or when ++ the OEM has decided not to use pin strapping and falls back to SW regs. ++ ++ qca,led-open-drain: ++ $ref: /schemas/types.yaml#/definitions/flag ++ description: ++ Set LEDs to open-drain mode. This requires the qca,ignore-power-on-sel to ++ be set, otherwise the driver will fail at probe. This is required if the ++ OEM does not use pin strapping to set this mode and prefers to set it ++ using SW regs. The pin strappings related to LED open-drain mode are ++ B68 on the QCA832x and B49 on the QCA833x. ++ ++ mdio: ++ type: object ++ description: Qca8k switch have an internal mdio to access switch port. ++ If this is not present, the legacy mapping is used and the ++ internal mdio access is used. ++ With the legacy mapping the reg corresponding to the internal ++ mdio is the switch reg with an offset of -1. ++ ++ properties: ++ '#address-cells': ++ const: 1 ++ '#size-cells': ++ const: 0 ++ ++ patternProperties: ++ "^(ethernet-)?phy@[0-4]$": ++ type: object ++ ++ allOf: ++ - $ref: "http://devicetree.org/schemas/net/mdio.yaml#" ++ ++ properties: ++ reg: ++ maxItems: 1 ++ ++ required: ++ - reg ++ ++patternProperties: ++ "^(ethernet-)?ports$": ++ type: object ++ properties: ++ '#address-cells': ++ const: 1 ++ '#size-cells': ++ const: 0 ++ ++ patternProperties: ++ "^(ethernet-)?port@[0-6]$": ++ type: object ++ description: Ethernet switch ports ++ ++ properties: ++ reg: ++ description: Port number ++ ++ label: ++ description: ++ Describes the label associated with this port, which will become ++ the netdev name ++ $ref: /schemas/types.yaml#/definitions/string ++ ++ link: ++ description: ++ Should be a list of phandles to other switch's DSA port. This ++ port is used as the outgoing port towards the phandle ports. The ++ full routing information must be given, not just the one hop ++ routes to neighbouring switches ++ $ref: /schemas/types.yaml#/definitions/phandle-array ++ ++ ethernet: ++ description: ++ Should be a phandle to a valid Ethernet device node. This host ++ device is what the switch port is connected to ++ $ref: /schemas/types.yaml#/definitions/phandle ++ ++ phy-handle: true ++ ++ phy-mode: true ++ ++ fixed-link: true ++ ++ mac-address: true ++ ++ sfp: true ++ ++ qca,sgmii-rxclk-falling-edge: ++ $ref: /schemas/types.yaml#/definitions/flag ++ description: ++ Set the receive clock phase to falling edge. Mostly commonly used on ++ the QCA8327 with CPU port 0 set to SGMII. ++ ++ qca,sgmii-txclk-falling-edge: ++ $ref: /schemas/types.yaml#/definitions/flag ++ description: ++ Set the transmit clock phase to falling edge. ++ ++ qca,sgmii-enable-pll: ++ $ref: /schemas/types.yaml#/definitions/flag ++ description: ++ For SGMII CPU port, explicitly enable PLL, TX and RX chain along with ++ Signal Detection. On the QCA8327 this should not be enabled, otherwise ++ the SGMII port will not initialize. When used on the QCA8337, revision 3 ++ or greater, a warning will be displayed. When the CPU port is set to ++ SGMII on the QCA8337, it is advised to set this unless a communication ++ issue is observed. ++ ++ required: ++ - reg ++ ++ additionalProperties: false ++ ++oneOf: ++ - required: ++ - ports ++ - required: ++ - ethernet-ports ++ ++required: ++ - compatible ++ - reg ++ ++additionalProperties: true ++ ++examples: ++ - | ++ #include ++ ++ mdio { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ external_phy_port1: ethernet-phy@0 { ++ reg = <0>; ++ }; ++ ++ external_phy_port2: ethernet-phy@1 { ++ reg = <1>; ++ }; ++ ++ external_phy_port3: ethernet-phy@2 { ++ reg = <2>; ++ }; ++ ++ external_phy_port4: ethernet-phy@3 { ++ reg = <3>; ++ }; ++ ++ external_phy_port5: ethernet-phy@4 { ++ reg = <4>; ++ }; ++ ++ switch@10 { ++ compatible = "qca,qca8337"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>; ++ reg = <0x10>; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ reg = <0>; ++ label = "cpu"; ++ ethernet = <&gmac1>; ++ phy-mode = "rgmii"; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; ++ ++ port@1 { ++ reg = <1>; ++ label = "lan1"; ++ phy-handle = <&external_phy_port1>; ++ }; ++ ++ port@2 { ++ reg = <2>; ++ label = "lan2"; ++ phy-handle = <&external_phy_port2>; ++ }; ++ ++ port@3 { ++ reg = <3>; ++ label = "lan3"; ++ phy-handle = <&external_phy_port3>; ++ }; ++ ++ port@4 { ++ reg = <4>; ++ label = "lan4"; ++ phy-handle = <&external_phy_port4>; ++ }; ++ ++ port@5 { ++ reg = <5>; ++ label = "wan"; ++ phy-handle = <&external_phy_port5>; ++ }; ++ }; ++ }; ++ }; ++ - | ++ #include ++ ++ mdio { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ switch@10 { ++ compatible = "qca,qca8337"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>; ++ reg = <0x10>; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ reg = <0>; ++ label = "cpu"; ++ ethernet = <&gmac1>; ++ phy-mode = "rgmii"; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; ++ ++ port@1 { ++ reg = <1>; ++ label = "lan1"; ++ phy-mode = "internal"; ++ phy-handle = <&internal_phy_port1>; ++ }; ++ ++ port@2 { ++ reg = <2>; ++ label = "lan2"; ++ phy-mode = "internal"; ++ phy-handle = <&internal_phy_port2>; ++ }; ++ ++ port@3 { ++ reg = <3>; ++ label = "lan3"; ++ phy-mode = "internal"; ++ phy-handle = <&internal_phy_port3>; ++ }; ++ ++ port@4 { ++ reg = <4>; ++ label = "lan4"; ++ phy-mode = "internal"; ++ phy-handle = <&internal_phy_port4>; ++ }; ++ ++ port@5 { ++ reg = <5>; ++ label = "wan"; ++ phy-mode = "internal"; ++ phy-handle = <&internal_phy_port5>; ++ }; ++ ++ port@6 { ++ reg = <0>; ++ label = "cpu"; ++ ethernet = <&gmac1>; ++ phy-mode = "sgmii"; ++ ++ qca,sgmii-rxclk-falling-edge; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; ++ }; ++ ++ mdio { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ internal_phy_port1: ethernet-phy@0 { ++ reg = <0>; ++ }; ++ ++ internal_phy_port2: ethernet-phy@1 { ++ reg = <1>; ++ }; ++ ++ internal_phy_port3: ethernet-phy@2 { ++ reg = <2>; ++ }; ++ ++ internal_phy_port4: ethernet-phy@3 { ++ reg = <3>; ++ }; ++ ++ internal_phy_port5: ethernet-phy@4 { ++ reg = <4>; ++ }; ++ }; ++ }; ++ };