From: Alban Bedel Date: Sat, 30 Apr 2022 08:42:33 +0000 (+0200) Subject: ramips: zbt-wg2626: Add the reset gpio for PCIe port 1 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f953a1a4bfba2fa70c12bb80938aa66481a673b6;p=openwrt%2Fstaging%2Fnbd.git ramips: zbt-wg2626: Add the reset gpio for PCIe port 1 The 2.4GHz interface doesn't come up properly with the log showing: mt7621-pci 1e140000.pcie: pcie1 no card, disable it (RST & CLK) As seen on other MT7621 boards this is caused by a missing reset GPIO. The MT7621 dtsi set GPIO 19 as PCIe reset GPIO, which on this board reset the 5GHz interface on port 0. Add GPIO 8 to the PCIe reset GPIO list to also reset the 2.4GHz interface on port 1. Signed-off-by: Alban Bedel --- diff --git a/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg2626.dts b/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg2626.dts index a1d6af9466..da22dc3797 100644 --- a/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg2626.dts +++ b/target/linux/ramips/dts/mt7621_zbtlink_zbt-wg2626.dts @@ -88,6 +88,9 @@ &pcie { status = "okay"; + + reset-gpios = <&gpio 19 GPIO_ACTIVE_LOW>, + <&gpio 8 GPIO_ACTIVE_LOW>; }; &pcie0 {