From: Thomas Roberts Date: Mon, 13 Feb 2017 17:29:34 +0000 (+0000) Subject: ar71xx: add support for TL-WR802N Version 2 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f9278337cf4b9c699a41dfc1e4c448213be53e61;p=openwrt%2Fstaging%2Fjogo.git ar71xx: add support for TL-WR802N Version 2 This patch adds support for the TP-Link TL-WR802N Version 2. Specification: - SoC: Qualcomm Atheros QCA9533 (560 MHz, MIPS 24Kc) - RAM: 32 MiB - Storage: 4 MiB of FLash on board - Wireless: Built into QCA9533 (Honey Bee), PHY modes b/g/n - Ethernet: 1x100M (port0) Installation through OEM Web Interface: - Connect to TL-WR802N by Ethernet or Wi-Fi - Go to http://192.168.0.1 (default user is "admin" & password is "admin) - Go to "System Tools -> Firmware Upgrade" - Browse for firmware "*.factory-us.bin" or "*.factory-eu.bin" for eu model - Click upgrade Installation through tftp: Note: T_OUT, T_IN and GND on the board must be connected to USB TTL Serial Configuration 115200 8n1 - Boot the TL-WR802N - When "Autobooting in 1 seconds" appears type "tpl" followed by enter - Connect to the board Ethernet port (IPADDR: 192.168.1.1, ServerIP: 192.168.1.10) - tftpboot 0x80000000 - Record the result of "printenv bootcmd" - Enter "erase +0x3c0000" (e.g erase 0x9f020000 +0x3c0000) - Enter "cp.b 0x80000000 0x3c0000" (e.g cp.b 0x80000000 0x9f020000 0x3c0000) - Enter "bootm " (e.g bootm 0x9f020000) Signed-off-by: Thomas Roberts --- diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 70f5dac944..4dc4bfd51d 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -667,6 +667,9 @@ tl-wpa8630) tl-wr802n-v1) ucidef_set_led_wlan "wlan" "WLAN" "tp-link:blue:system" "phy0tpt" ;; +tl-wr802n-v2) + ucidef_set_led_wlan "wlan" "WLAN" "$board:green:system" "phy0tpt" + ;; tl-wr940n-v4|\ tl-wr941nd-v6) ucidef_set_led_netdev "wan" "WAN" "tp-link:blue:wan" "eth0" diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index 3ae35f1a81..95faea0702 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -116,6 +116,7 @@ ar71xx_setup_interfaces() tl-wa901nd-v4|\ tl-wr703n|\ tl-wr802n-v1|\ + tl-wr802n-v2|\ tube2h|\ unifiac-lite|\ wndap360|\ diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index ae6c693da8..106464105a 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -26,6 +26,7 @@ get_status_led() { minibox-v1|\ som9331|\ sr3200|\ + tl-wr802n-v2|\ xd3200) status_led="$board:green:system" ;; diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 2ae4e1168f..ae0189d05b 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -220,6 +220,10 @@ tplink_board_detect() { ;; "080200"*) model="TP-Link TL-WR802N" + + if [ "$hwid" = '08020002' -a "$mid" = '00000002' ]; then + hwver=' v2' + fi ;; "083000"*) model="TP-Link TL-WA830RE" @@ -1031,6 +1035,9 @@ ar71xx_board_detect() { *"TL-WR802N v1") name="tl-wr802n-v1" ;; + *"TL-WR802N v2") + name="tl-wr802n-v2" + ;; *TL-WA901ND) name="tl-wa901nd" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index c2585b45a5..0175f6d32c 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -430,6 +430,7 @@ platform_check_image() { tl-wr741nd-v4|\ tl-wr741nd|\ tl-wr802n-v1|\ + tl-wr802n-v2|\ tl-wr810n|\ tl-wr841n-v11|\ tl-wr841n-v1|\ diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index d45c3c46d2..0e2d786551 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -193,6 +193,7 @@ CONFIG_ATH79_MACH_TL_WR720N_V3=y CONFIG_ATH79_MACH_TL_WR741ND=y CONFIG_ATH79_MACH_TL_WR741ND_V4=y CONFIG_ATH79_MACH_TL_WR802N_V1=y +CONFIG_ATH79_MACH_TL_WR802N_V2=y CONFIG_ATH79_MACH_TL_WR810N=y CONFIG_ATH79_MACH_TL_WR841N_V1=y CONFIG_ATH79_MACH_TL_WR841N_V8=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 44f754c2bc..514d05d6de 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -1533,6 +1533,14 @@ config ATH79_MACH_TL_WR802N_V1 select ATH79_DEV_LEDS_GPIO select ATH79_DEV_M25P80 +config ATH79_MACH_TL_WR802N_V2 + bool "TP-LINK TL-WR802N v2 support" + select SOC_QCA953X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + config ATH79_MACH_TL_WR810N bool "TP-LINK TL-WR810N support" select SOC_QCA953X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index f402463dfc..64752591d5 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -198,6 +198,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WR720N_V3) += mach-tl-wr720n-v3.o obj-$(CONFIG_ATH79_MACH_TL_WR741ND) += mach-tl-wr741nd.o obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4) += mach-tl-wr741nd-v4.o obj-$(CONFIG_ATH79_MACH_TL_WR802N_V1) += mach-tl-wr802n.o +obj-$(CONFIG_ATH79_MACH_TL_WR802N_V2) += mach-tl-wr802n-v2.o obj-$(CONFIG_ATH79_MACH_TL_WR810N) += mach-tl-wr810n.o obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1) += mach-tl-wr841n.o obj-$(CONFIG_ATH79_MACH_TL_WR841N_V8) += mach-tl-wr841n-v8.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr802n-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr802n-v2.c new file mode 100644 index 0000000000..10e0c595a6 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr802n-v2.c @@ -0,0 +1,97 @@ +/* + * TP-LINK TL-WR802N v2 + * + * Copyright (C) 2016 Thomas Roberts > + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include + +#include +#include + +#include "common.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define TL_WR802N_V2_GPIO_LED_SYSTEM 13 +#define TL_WR802N_V2_GPIO_BTN_RESET 11 + +#define TL_WR802N_V2_KEYS_POLL_INTERVAL 20 /* msecs */ +#define TL_WR802N_V2_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR802N_V2_KEYS_POLL_INTERVAL) + +static const char *tl_wr802n_v2_part_probes[] = { + "tp-link", + NULL, +}; + +static struct flash_platform_data tl_wr802n_v2_flash_data = { + .part_probes = tl_wr802n_v2_part_probes, +}; + +static struct gpio_led tl_wr802n_v2_leds_gpio[] __initdata = { + { + .name = "tl-wr802n-v2:green:system", + .gpio = TL_WR802N_V2_GPIO_LED_SYSTEM, + .active_low = 1, + }, +}; + +static struct gpio_keys_button tl_wr802n_v2_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TL_WR802N_V2_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WR802N_V2_GPIO_BTN_RESET, + .active_low = 0, + } +}; + +static void __init tl_ap143_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + u8 tmpmac[ETH_ALEN]; + + ath79_register_m25p80(&tl_wr802n_v2_flash_data); + + ath79_setup_ar933x_phy4_switch(false, false); + + ath79_register_mdio(0, 0x0); + + /* LAN */ + ath79_switch_data.phy4_mii_en = 1; + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_eth0_data.speed = SPEED_100; + ath79_eth0_data.phy_mask = BIT(4); + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); + ath79_register_eth(0); + + ath79_init_mac(tmpmac, mac, 0); + ath79_register_wmac(ee, tmpmac); +}; + +static void __init tl_wr802n_v2_setup(void) +{ + tl_ap143_setup(); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr802n_v2_leds_gpio), + tl_wr802n_v2_leds_gpio); + + ath79_register_gpio_keys_polled(1, TL_WR802N_V2_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tl_wr802n_v2_gpio_keys), + tl_wr802n_v2_gpio_keys); +} + +MIPS_MACHINE(ATH79_MACH_TL_WR802N_V2, "TL-WR802N-v2", "TP-LINK TL-WR802N v2", + tl_wr802n_v2_setup); \ No newline at end of file diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 39a80fc6fb..4cad6287a8 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -237,6 +237,7 @@ enum ath79_mach_type { ATH79_MACH_TL_WR741ND, /* TP-LINK TL-WR741ND */ ATH79_MACH_TL_WR741ND_V4, /* TP-LINK TL-WR741ND v4 */ ATH79_MACH_TL_WR802N_V1, /* TP-LINK TL-WR802N v1 */ + ATH79_MACH_TL_WR802N_V2, /* TP-LINK TL-WR802N v2 */ ATH79_MACH_TL_WR810N, /* TP-LINK TL-WR810N */ ATH79_MACH_TL_WR841N_V1, /* TP-LINK TL-WR841N v1 */ ATH79_MACH_TL_WR841N_V11, /* TP-LINK TL-WR841N/ND v11 */ diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk index 34b5390fca..b251135c55 100644 --- a/target/linux/ar71xx/image/tp-link.mk +++ b/target/linux/ar71xx/image/tp-link.mk @@ -631,12 +631,24 @@ TARGET_DEVICES += tl-wr740n-v1 tl-wr740n-v3 tl-wr740n-v4 tl-wr740n-v5 tl-wr740n- define Device/tl-wr802n-v1 $(Device/tplink-4mlzma) DEVICE_TITLE := TP-LINK TL-WR802N v1 - BOARDNAME := TL-WR802N-v1 + BOARDNAME := TL-WR802N-v1 DEVICE_PROFILE := TLWR802 TPLINK_HWID := 0x08020001 TPLINK_HWREV := 1 endef -TARGET_DEVICES += tl-wr802n-v1 + +define Device/tl-wr802n-v2 + $(Device/tplink-4mlzma) + DEVICE_TITLE := TP-LINK TL-WR802N v2 + BOARDNAME := TL-WR802N-v2 + DEVICE_PROFILE := TLWR802 + TPLINK_HWID := 0x08020002 + TPLINK_HWREV := 2 + IMAGES += factory-us.bin factory-eu.bin + IMAGE/factory-us.bin := append-rootfs | mktplinkfw factory -C US + IMAGE/factory-eu.bin := append-rootfs | mktplinkfw factory -C EU +endef +TARGET_DEVICES += tl-wr802n-v1 tl-wr802n-v2 define Device/tl-wr841-v1.5 $(Device/tplink-4m) diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default index aa2cf3c261..733914983e 100644 --- a/target/linux/ar71xx/mikrotik/config-default +++ b/target/linux/ar71xx/mikrotik/config-default @@ -158,6 +158,7 @@ CONFIG_ATH79_MACH_RBSXTLITE=y # CONFIG_ATH79_MACH_TL_WR741ND is not set # CONFIG_ATH79_MACH_TL_WR741ND_V4 is not set # CONFIG_ATH79_MACH_TL_WR802N_V1 is not set +# CONFIG_ATH79_MACH_TL_WR802N_V2 is not set # CONFIG_ATH79_MACH_TL_WR810N is not set # CONFIG_ATH79_MACH_TL_WR841N_V1 is not set # CONFIG_ATH79_MACH_TL_WR841N_V8 is not set