From: Jes Sorensen <Jes.Sorensen@redhat.com>
Date: Fri, 16 May 2014 08:03:43 +0000 (+0200)
Subject: staging: rtl8723au: rtl8723au_led.c: Use BIT() instead of BITx
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f8c41a92fb741e1592801223bd75b432dca7ae4b;p=openwrt%2Fstaging%2Fblogic.git

staging: rtl8723au: rtl8723au_led.c: Use BIT() instead of BITx

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

diff --git a/drivers/staging/rtl8723au/hal/rtl8723au_led.c b/drivers/staging/rtl8723au/hal/rtl8723au_led.c
index 4d5c909487f8..b06905d019d3 100644
--- a/drivers/staging/rtl8723au/hal/rtl8723au_led.c
+++ b/drivers/staging/rtl8723au/hal/rtl8723au_led.c
@@ -41,14 +41,17 @@ void SwLedOn23a(struct rtw_adapter *padapter, struct led_8723a *pLed)
 	case LED_PIN_GPIO0:
 		break;
 	case LED_PIN_LED0:
-		rtw_write8(padapter, REG_LEDCFG0, (LedCfg&0xf0)|BIT5|BIT6); /*  SW control led0 on. */
+		/*  SW control led0 on. */
+		rtw_write8(padapter, REG_LEDCFG0, (LedCfg&0xf0)|BIT(5)|BIT(6));
 		break;
 	case LED_PIN_LED1:
-		rtw_write8(padapter, REG_LEDCFG1, (LedCfg&0x00)|BIT6); /*  SW control led1 on. */
+		 /*  SW control led1 on. */
+		rtw_write8(padapter, REG_LEDCFG1, (LedCfg&0x00)|BIT(6));
 		break;
 	case LED_PIN_LED2:
 		LedCfg = rtw_read8(padapter, REG_LEDCFG2);
-		rtw_write8(padapter, REG_LEDCFG2, (LedCfg&0x80)|BIT5); /*  SW control led1 on. */
+		 /*  SW control led1 on. */
+		rtw_write8(padapter, REG_LEDCFG2, (LedCfg&0x80)|BIT(5));
 		break;
 	default:
 		break;
@@ -70,14 +73,17 @@ void SwLedOff23a(struct rtw_adapter *padapter, struct led_8723a *pLed)
 	case LED_PIN_GPIO0:
 		break;
 	case LED_PIN_LED0:
-		rtw_write8(padapter, REG_LEDCFG0, (LedCfg&0xf0)|BIT5|BIT6); /*  SW control led0 on. */
+		/*  SW control led0 on. */
+		rtw_write8(padapter, REG_LEDCFG0, (LedCfg&0xf0)|BIT(5)|BIT(6));
 		break;
 	case LED_PIN_LED1:
-		rtw_write8(padapter, REG_LEDCFG1, (LedCfg&0x00)|BIT5|BIT6); /*  SW control led1 on. */
+		/*  SW control led1 on. */
+		rtw_write8(padapter, REG_LEDCFG1, (LedCfg&0x00)|BIT(5)|BIT(6));
 		break;
 	case LED_PIN_LED2:
 		LedCfg = rtw_read8(padapter, REG_LEDCFG2);
-		rtw_write8(padapter, REG_LEDCFG2, (LedCfg&0x80)|BIT3|BIT5); /*  SW control led1 on. */
+		/*  SW control led1 on. */
+		rtw_write8(padapter, REG_LEDCFG2, (LedCfg&0x80)|BIT(3)|BIT(5));
 		break;
 	default:
 		break;