From: Gabor Juhos <juhosg@openwrt.org>
Date: Tue, 25 Dec 2012 18:45:32 +0000 (+0000)
Subject: ar71xx: dynamically set AR8327's PAD configuration on AP136
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f8b4dfd172b3c5bb4ce39e881cac89370e928aab;p=openwrt%2Fstaging%2Fblocktrron.git

ar71xx: dynamically set AR8327's PAD configuration on AP136

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34882
---

diff --git a/target/linux/ar71xx/patches-3.6/609-MIPS-ath79-ap136-fixes.patch b/target/linux/ar71xx/patches-3.6/609-MIPS-ath79-ap136-fixes.patch
index 58cd680ce4..9b887cbf30 100644
--- a/target/linux/ar71xx/patches-3.6/609-MIPS-ath79-ap136-fixes.patch
+++ b/target/linux/ar71xx/patches-3.6/609-MIPS-ath79-ap136-fixes.patch
@@ -56,40 +56,16 @@
  
  static struct gpio_led ap136_leds_gpio[] __initdata = {
  	{
-@@ -98,63 +104,106 @@ static struct gpio_keys_button ap136_gpi
+@@ -98,63 +104,103 @@ static struct gpio_keys_button ap136_gpi
  	},
  };
  
 -static struct ath79_spi_controller_data ap136_spi0_data = {
 -	.cs_type = ATH79_SPI_CS_TYPE_INTERNAL,
 -	.cs_line = 0,
-+static struct ar8327_pad_cfg ap136_ar8327_pad0_cfg = {
-+	.mode = AR8327_PAD_MAC_RGMII,
-+	.txclk_delay_en = true,
-+	.rxclk_delay_en = true,
-+	.txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
-+	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
- };
- 
--static struct spi_board_info ap136_spi_info[] = {
--	{
--		.bus_num	= 0,
--		.chip_select	= 0,
--		.max_speed_hz	= 25000000,
--		.modalias	= "mx25l6405d",
--		.controller_data = &ap136_spi0_data,
--	}
-+static struct ar8327_pad_cfg ap136_ar8327_pad6_cfg = {
-+	.mode = AR8327_PAD_MAC_SGMII,
-+	.txclk_delay_en = false,
-+	.rxclk_delay_en = true,
-+	.txclk_delay_sel = AR8327_CLK_DELAY_SEL0,
-+	.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0,
- };
- 
--static struct ath79_spi_platform_data ap136_spi_data = {
--	.bus_num	= 0,
--	.num_chipselect	= 1,
++static struct ar8327_pad_cfg ap136_ar8327_pad0_cfg;
++static struct ar8327_pad_cfg ap136_ar8327_pad6_cfg;
++
 +static struct ar8327_platform_data ap136_ar8327_data = {
 +	.pad0_cfg = &ap136_ar8327_pad0_cfg,
 +	.pad6_cfg = &ap136_ar8327_pad6_cfg,
@@ -109,37 +85,49 @@
 +	},
  };
  
--#ifdef CONFIG_PCI
--static struct ath9k_platform_data ap136_ath9k_data;
+-static struct spi_board_info ap136_spi_info[] = {
 +static struct mdio_board_info ap136_mdio0_info[] = {
-+	{
+ 	{
+-		.bus_num	= 0,
+-		.chip_select	= 0,
+-		.max_speed_hz	= 25000000,
+-		.modalias	= "mx25l6405d",
+-		.controller_data = &ap136_spi0_data,
+-	}
 +		.bus_id = "ag71xx-mdio.0",
 +		.phy_addr = 0,
 +		.platform_data = &ap136_ar8327_data,
 +	},
-+};
+ };
  
--static int ap136_pci_plat_dev_init(struct pci_dev *dev)
+-static struct ath79_spi_platform_data ap136_spi_data = {
+-	.bus_num	= 0,
+-	.num_chipselect	= 1,
+-};
 +static void __init ap136_gmac_setup(void)
- {
--	if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0)
--		dev->dev.platform_data = &ap136_ath9k_data;
++{
 +	void __iomem *base;
 +	u32 t;
  
+-#ifdef CONFIG_PCI
+-static struct ath9k_platform_data ap136_ath9k_data;
++	base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
+ 
+-static int ap136_pci_plat_dev_init(struct pci_dev *dev)
+-{
+-	if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0)
+-		dev->dev.platform_data = &ap136_ath9k_data;
++	t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG);
+ 
 -	return 0;
 -}
-+	base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
++	t &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII);
++	t |= QCA955X_ETH_CFG_RGMII_EN;
  
 -static void __init ap136_pci_init(u8 *eeprom)
 -{
 -	memcpy(ap136_ath9k_data.eeprom_data, eeprom,
 -	       sizeof(ap136_ath9k_data.eeprom_data));
-+	t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG);
-+
-+	t &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII);
-+	t |= QCA955X_ETH_CFG_RGMII_EN;
-+
 +	__raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);
  
 -	ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init);
@@ -179,6 +167,16 @@
 +	mdiobus_register_board_info(ap136_mdio0_info,
 +				    ARRAY_SIZE(ap136_mdio0_info));
 +
++	ap136_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_RGMII;
++	ap136_ar8327_pad0_cfg.txclk_delay_en = true;
++	ap136_ar8327_pad0_cfg.rxclk_delay_en = true;
++	ap136_ar8327_pad0_cfg.txclk_delay_sel = AR8327_CLK_DELAY_SEL1;
++	ap136_ar8327_pad0_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL2;
++
++	ap136_ar8327_pad6_cfg.mode = AR8327_PAD_MAC_SGMII;
++	ap136_ar8327_pad6_cfg.rxclk_delay_en = true;
++	ap136_ar8327_pad6_cfg.rxclk_delay_sel = AR8327_CLK_DELAY_SEL0;
++
 +	/* GMAC0 is connected to GMAC0 of the AR8327 switch via RGMII */
 +	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
 +	ath79_eth0_data.phy_mask = BIT(0);