From: Mikhail Zhilkin Date: Wed, 5 Jan 2022 13:11:56 +0000 (+0000) Subject: ramips: add support for Beeline SmartBox Flash X-Git-Tag: v22.03.0-rc1~147 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f8b02130d2cd3b919c1292bc8ee8870f66794536;p=openwrt%2Fopenwrt.git ramips: add support for Beeline SmartBox Flash Beeline SmartBox Flash is a wireless AC1300 (WiFi 5) router manufactured by Arcadyan company. Device specification -------------------- SoC Type: MediaTek MT7621AT RAM: 256 MiB, Winbond W632GU6NB Flash: 128 MiB (NAND), Winbond W29N01HVSINF Wireless 2.4 GHz (MT7615DN): b/g/n, 2x2 Wireless 5 GHz (MT7615DN): a/n/ac, 2x2 Ethernet: 3xGbE (WAN, LAN1, LAN2) USB ports: 1xUSB3.0 Button: 1 (Reset/WPS) LEDs: 1 RGB LED Power: 12 VDC, 1.5 A Connector type: Barrel Bootloader: U-Boot (Ralink UBoot Version: 5.0.0.2) OEM: Arcadyan WE42022 Installation ------------ 1. Place *factory.trx on any web server (192.168.1.2 in this example) 2. Connect to the router using telnet shell (no password required) 3. Save MAC adresses to U-Boot environment: uboot_env --set --name eth2macaddr --value $(ifconfig | grep eth2 | \ awk '{print $5}') uboot_env --set --name eth3macaddr --value $(ifconfig | grep eth3 | \ awk '{print $5}') uboot_env --set --name ra0macaddr --value $(ifconfig | grep ra0 | \ awk '{print $5}') uboot_env --set --name rax0macaddr --value $(ifconfig | grep rax0 | \ awk '{print $5}') 4. Ensure that MACs were saved correctly: uboot_env --get --name eth2macaddr uboot_env --get --name eth3macaddr uboot_env --get --name ra0macaddr uboot_env --get --name rax0macaddr 5. Download and write the OpenWrt images: cd /tmp wget http://192.168.1.2/factory.trx mtd_write erase /dev/mtd4 mtd_write write factory.trx /dev/mtd4 6. Set 1st boot partition and reboot: uboot_env --set --name bootpartition --value 0 reboot Back to Stock ------------- 1. Run in the OpenWrt shell: fw_setenv bootpartition 1 reboot 2. Optional step. Upgrade the stock firmware with any version to overwrite the OpenWrt in Slot 1. MAC addresses ------------- +-----------+-------------------+----------------+ | Interface | MAC | Source | +-----------+-------------------+----------------+ | label | 30:xx:xx:51:xx:09 | No MACs was | | LAN | 30:xx:xx:51:xx:09 | found on Flash | | WAN | 30:xx:xx:51:xx:06 | [1] | | WLAN_2g | 30:xx:xx:51:xx:07 | | | WLAN_5g | 32:xx:xx:41:xx:07 | | +-----------+-------------------+----------------+ [1]: a. Label wasb't found neither in factory nor in other places. b. MAC addresses are stored in encrypted partition "glbcfg". Encryption key hasn't known yet. To ensure the correct MACs in OpenWrt, a hack with saving of the MACs to u-boot-env during the installation was applied. c. Default Ralink ethernet MAC address (00:0C:43:28:80:36) was found in "Factory" 0xfff0. It's the same for all Smartbox Flash devices. OEM firmware also uses this MAC when initialazes ethernet driver. In OpenWrt we use it only as internal GMAC (eth0), all other MACs are unique. Therefore, there is no any barriers to the operation of several Smartbox Flash devices even within the same broadcast domain. Stock firmware image format --------------------------- +--------------+---------------+----------------------------------------+ | Offset | 1.0.15 | Description | +==============+===============+========================================+ | 0x0 | 5d 43 6f 74 | TRX magic "]Cot" | +--------------+---------------+----------------------------------------+ | 0x4 | 00 70 ff 00 | Length (reverse) | +--------------+---------------+----------------------------------------+ | | | htonl(~crc) from 0xc ("flag_version") | | 0x8 | 72 b3 93 16 | to "Length" | +--------------+---------------+----------------------------------------+ | 0xc | 00 00 01 00 | Flags | +--------------+---------------+----------------------------------------+ | | | Offset (reverse) of Kernel partition | | 0x10 | 1c 00 00 00 | from the start of the header | +--------------+---------------+----------------------------------------+ | | | Offset (reverse) of RootFS partition | | 0x14 | 00 00 42 00 | from the start of the header | +--------------+---------------+----------------------------------------+ | 0x18 | 00 00 00 00 | Zeroes | +--------------+---------------+----------------------------------------+ | 0x1c | 27 05 19 56 … | Kernel data + zero padding | +--------------+---------------+----------------------------------------+ | | | RootFS data (starting with "hsqs") + | | 0x420000 | 68 73 71 73 … | zero padding to "Length" | +--------------+---------------+----------------------------------------+ | | | Some signature data (format is | | | | unknown). Necessary for the fw | | "Lenght" | 00 00 00 00 … | update via oem fw web interface. | +--------------+---------------+----------------------------------------+ | "Lenght" + | | TRX magic "HDR0". U-Boot is | | 0x10c | 48 44 52 30 | checking it at every boot. | +--------------+---------------+----------------------------------------+ | | | 1.00: | | | | Zero padding to ("Lenght" + 0x23000) | | | | 1.0.12: | | | | Zero padding to ("Lenght" + 0x2a000) | | "Lenght" + | | 1.0.13, 1.0.15, 1.0.16: | | 0x110 | 00 00 00 00 | Zero padding to ("Lenght" + 0x10000) | +--------------+---------------+----------------------------------------+ Signed-off-by: Mikhail Zhilkin --- diff --git a/package/boot/uboot-envtools/files/ramips b/package/boot/uboot-envtools/files/ramips index e0ea92bf43..763f15d4e0 100644 --- a/package/boot/uboot-envtools/files/ramips +++ b/package/boot/uboot-envtools/files/ramips @@ -52,6 +52,7 @@ ravpower,rp-wd03) jcg,q20) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000" ;; +beeline,smartbox-flash|\ linksys,ea6350-v4|\ linksys,ea7300-v1|\ linksys,ea7300-v2|\ diff --git a/target/linux/ramips/dts/mt7621_beeline_smartbox-flash.dts b/target/linux/ramips/dts/mt7621_beeline_smartbox-flash.dts new file mode 100644 index 0000000000..45feb13756 --- /dev/null +++ b/target/linux/ramips/dts/mt7621_beeline_smartbox-flash.dts @@ -0,0 +1,202 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621.dtsi" + +#include +#include +#include + +/ { + compatible = "beeline,smartbox-flash", "mediatek,mt7621-soc"; + model = "Beeline SmartBox Flash"; + + aliases { + led-boot = &led_status_red; + led-failsafe = &led_status_red; + led-running = &led_status_green; + led-upgrade = &led_status_red; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + label = "blue:wan"; + color = ; + function = LED_FUNCTION_WAN; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + + led_status_green: led-1 { + label = "green:status"; + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + + led_status_red: led-2 { + label = "red:status"; + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + ubi-concat { + compatible = "mtd-concat"; + devices = <&ubiconcat0 &ubiconcat1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "ubi"; + reg = <0x0 0x5240000>; + }; + }; + }; +}; + +&nand { + status = "okay"; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x100000>; + read-only; + }; + + partition@100000 { + label = "u-boot-env"; + reg = <0x100000 0x100000>; + }; + + factory: partition@200000 { + label = "Factory"; + reg = <0x200000 0x100000>; + read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_factory_fff0: macaddr@fff0 { + reg = <0xfff0 0x6>; + }; + }; + + partition@300000 { + label = "firmware"; + reg = <0x300000 0x2000000>; + + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x0 0x440000>; + }; + + ubiconcat0: partition@400000 { + label = "ubiconcat0"; + reg = <0x440000 0x1bc0000>; + }; + }; + + partition@2300000 { + label = "Firmware2"; + reg = <0x2300000 0x2000000>; + read-only; + }; + + partition@4300000 { + label = "glbcfg"; + reg = <0x4300000 0x200000>; + read-only; + }; + + partition@4500000 { + label = "board_data"; + reg = <0x4500000 0x100000>; + read-only; + }; + + partition@4600000 { + label = "glbcfg2"; + reg = <0x4600000 0x200000>; + read-only; + }; + + partition@4800000 { + label = "board_data2"; + reg = <0x4800000 0x100000>; + read-only; + }; + + ubiconcat1: partition@4900000 { + label = "ubiconcat1"; + reg = <0x4900000 0x3680000>; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x0>; + }; +}; + +&gmac0 { + nvmem-cells = <&macaddr_factory_fff0>; + nvmem-cell-names = "mac-address"; +}; + +&switch0 { + ports { + port@2 { + status = "okay"; + label = "lan2"; + }; + + port@3 { + status = "okay"; + label = "lan1"; + }; + + port@4 { + status = "okay"; + label = "wan"; + }; + }; +}; + +&state_default { + gpio { + groups = "i2c", "jtag"; + function = "gpio"; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 69d83e57e7..8bef3a1bfb 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -9,6 +9,18 @@ DEFAULT_SOC := mt7621 KERNEL_DTB += -d21 DEVICE_VARS += ELECOM_HWNAME LINKSYS_HWNAME +define Build/beeline-trx + echo -ne "hsqs" > $@.hsqs + $(STAGING_DIR_HOST)/bin/otrx create $@.trx -M 0x746f435d -f $@ \ + -a 0x20000 -b 0x420000 -f $@.hsqs -a 1000 + mv $@.trx $@ + dd if=/dev/zero bs=1024 count=1 >> $@.tail + echo -ne "HDR0" | dd of=$@.tail bs=1 seek=$$((0x10c)) count=4 \ + conv=notrunc 2>/dev/null + dd if=$@.tail >> $@ 2>/dev/null + rm $@.hsqs $@.tail +endef + define Build/gemtek-trailer printf "%s%08X" ".GEMTEK." "$$(cksum $@ | cut -d ' ' -f1)" >> $@ endef @@ -215,6 +227,28 @@ define Device/asus_rt-n56u-b1 endef TARGET_DEVICES += asus_rt-n56u-b1 +define Device/beeline_smartbox-flash + $(Device/dsa-migration) + $(Device/uimage-lzma-loader) + DEVICE_VENDOR := Beeline + DEVICE_MODEL := SmartBox Flash + IMAGE_SIZE := 32768k + KERNEL_SIZE := 4352k + UBINIZE_OPTS := -E 5 + BLOCKSIZE := 128k + PAGESIZE := 2048 + KERNEL := kernel-bin | append-dtb | lzma | loader-kernel | \ + uImage none | beeline-trx | pad-to $$(KERNEL_SIZE) + KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-kernel | \ + uImage none + IMAGES += factory.trx + IMAGE/factory.trx := append-kernel | append-ubi | check-size + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata + DEVICE_PACKAGES := kmod-usb3 kmod-mt7615e kmod-mt7615-firmware \ + uboot-envtools +endef +TARGET_DEVICES += beeline_smartbox-flash + define Device/buffalo_wsr-1166dhp $(Device/dsa-migration) $(Device/uimage-lzma-loader) diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds index 29b29a1cfc..c0add4c88e 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds @@ -11,6 +11,9 @@ asus,rt-n56u-b1) ucidef_set_led_netdev "lan" "LAN link" "blue:lan" "br-lan" ucidef_set_led_netdev "wan" "WAN link" "blue:wan" "wan" ;; +beeline,smartbox-flash) + ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan" + ;; cudy,wr2100) ucidef_set_led_netdev "lan1" "lan1" "green:lan1" "lan1" ucidef_set_led_netdev "lan2" "lan2" "green:lan2" "lan2" diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index bd51f3638e..1fc0ccdd5b 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -38,6 +38,7 @@ ramips_setup_interfaces() ucidef_set_interfaces_lan_wan "lan" "wan" ;; asiarf,ap7621-nv1|\ + beeline,smartbox-flash|\ glinet,gl-mt1300|\ iptime,a3002mesh|\ jcg,q20|\ @@ -115,6 +116,11 @@ ramips_setup_macs() wan_mac=$(mtd_get_mac_ascii u-boot-env et1macaddr) label_mac=$(mtd_get_mac_binary factory 0x4) ;; + beeline,smartbox-flash) + lan_mac=$(mtd_get_mac_ascii u-boot-env eth2macaddr) + wan_mac=$(mtd_get_mac_ascii u-boot-env eth3macaddr) + label_mac=$lan_mac + ;; buffalo,wsr-1166dhp) local index="$(find_mtd_index "board_data")" wan_mac="$(grep -m1 mac= "/dev/mtd${index}" | cut -d= -f2)" diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index f2daac990b..d018c1de1b 100644 --- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -10,6 +10,12 @@ PHYNBR=${DEVPATH##*/phy} board=$(board_name) case "$board" in + beeline,smartbox-flash) + hw_mac_addr_ra0="$(mtd_get_mac_ascii u-boot-env ra0macaddr)" + hw_mac_addr_rax0="$(mtd_get_mac_ascii u-boot-env rax0macaddr)" + [ "$PHYNBR" = "0" ] && echo -n $hw_mac_addr_ra0 > /sys${DEVPATH}/macaddress + [ "$PHYNBR" = "1" ] && echo -n $hw_mac_addr_rax0 > /sys${DEVPATH}/macaddress + ;; dlink,dir-853-a3) [ "$PHYNBR" = "0" ] && \ macaddr_setbit_la "$(mtd_get_mac_binary factory 0xe000)" \ diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh index 2052ae4446..c818c7e7cc 100755 --- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh @@ -53,6 +53,7 @@ platform_do_upgrade() { ampedwireless,ally-r1900k|\ asus,rt-ac65p|\ asus,rt-ac85p|\ + beeline,smartbox-flash|\ dlink,dir-1960-a1|\ dlink,dir-2640-a1|\ dlink,dir-2660-a1|\