From: Florent Jacquet Date: Thu, 16 Feb 2017 10:46:42 +0000 (+0100) Subject: sunxi: Add defconfig for Allwinner A23 EVB X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f7d4d9e52cdcff2a8fcdc80b567a41f48b61951c;p=project%2Fbcm63xx%2Fu-boot.git sunxi: Add defconfig for Allwinner A23 EVB This enables the support for the Allwinner A23 Evaluation Board (EVB), that already had a device tree (from Linux) but no defconfig. This board has an AXP223 PMIC, some NAND, Audio out and in plugs, an accelerometer and light sensor, as well as a USB HSIC hub and a USB OTG mini-USB connector. It also has a Wifi/BT chip. Access to the other buses (LCD, MIPI DSI, LVDS, etc) can be done through dedicated pin headers. Signed-off-by: Florent Jacquet Cc: Jagan Teki Cc: Maxime Ripard Signed-off-by: Maxime Ripard --- diff --git a/configs/sun8i_a23_evb_defconfig b/configs/sun8i_a23_evb_defconfig new file mode 100644 index 0000000000..296df00043 --- /dev/null +++ b/configs/sun8i_a23_evb_defconfig @@ -0,0 +1,19 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN8I_A23=y +CONFIG_DRAM_CLK=552 +CONFIG_DRAM_ZQ=63351 +CONFIG_USB0_VBUS_PIN="axp_drivebus" +CONFIG_USB0_VBUS_DET="axp_vbus_detect" +CONFIG_USB1_VBUS_PIN="PH7" +CONFIG_DEFAULT_DEVICE_TREE="sun8i-a23-evb" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5" +CONFIG_SPL=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_ISO_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_USB_EHCI_HCD=y