From: Felix Fietkau Date: Tue, 4 Aug 2015 23:09:55 +0000 (+0000) Subject: ipq806x: fix pcie pinmux naming in ipq806x dts X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f7651fdba51fae235bb9e43fcecc0478faf927d0;p=openwrt%2Fstaging%2Flynxis%2Fomap.git ipq806x: fix pcie pinmux naming in ipq806x dts PCIe controller nodes are numbers 0/1/2 in the chipset dtsi file, but the pinmux nodes are numbers 1/2/3. We'll make it consistent by changing the pinmux numbering to match the controller's one. Signed-off-by: Mathieu Olivari SVN-Revision: 46556 --- diff --git a/target/linux/ipq806x/patches-3.18/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch b/target/linux/ipq806x/patches-3.18/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch index 80ac25faeb..bdc91fb6b7 100644 --- a/target/linux/ipq806x/patches-3.18/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch +++ b/target/linux/ipq806x/patches-3.18/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch @@ -15,11 +15,11 @@ Signed-off-by: Mathieu Olivari --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts -@@ -30,6 +30,22 @@ +@@ -35,6 +35,22 @@ bias-disable; }; -+ pcie1_pins: pcie1_pinmux { ++ pcie0_pins: pcie0_pinmux { + mux { + pins = "gpio3"; + drive-strength = <2>; @@ -27,7 +27,7 @@ Signed-off-by: Mathieu Olivari + }; + }; + -+ pcie2_pins: pcie2_pinmux { ++ pcie1_pins: pcie1_pinmux { + mux { + pins = "gpio48"; + drive-strength = <2>; @@ -38,7 +38,7 @@ Signed-off-by: Mathieu Olivari spi_pins: spi_pins { mux { pins = "gpio18", "gpio19", "gpio21"; -@@ -133,5 +149,19 @@ +@@ -138,5 +154,19 @@ usb30@1 { status = "ok"; }; @@ -46,14 +46,14 @@ Signed-off-by: Mathieu Olivari + pcie0: pci@1b500000 { + status = "ok"; + reset-gpio = <&qcom_pinmux 3 0>; -+ pinctrl-0 = <&pcie1_pins>; ++ pinctrl-0 = <&pcie0_pins>; + pinctrl-names = "default"; + }; + + pcie1: pci@1b700000 { + status = "ok"; + reset-gpio = <&qcom_pinmux 48 0>; -+ pinctrl-0 = <&pcie2_pins>; ++ pinctrl-0 = <&pcie1_pins>; + pinctrl-names = "default"; + }; }; @@ -64,7 +64,7 @@ Signed-off-by: Mathieu Olivari bias-disable; }; -+ pcie1_pins: pcie1_pinmux { ++ pcie0_pins: pcie0_pinmux { + mux { + pins = "gpio3"; + drive-strength = <2>; @@ -72,7 +72,7 @@ Signed-off-by: Mathieu Olivari + }; + }; + -+ pcie2_pins: pcie2_pinmux { ++ pcie1_pins: pcie1_pinmux { + mux { + pins = "gpio48"; + drive-strength = <2>; @@ -80,7 +80,7 @@ Signed-off-by: Mathieu Olivari + }; + }; + -+ pcie3_pins: pcie3_pinmux { ++ pcie2_pins: pcie2_pinmux { + mux { + pins = "gpio63"; + drive-strength = <2>; @@ -99,21 +99,21 @@ Signed-off-by: Mathieu Olivari + pcie0: pci@1b500000 { + status = "ok"; + reset-gpio = <&qcom_pinmux 3 0>; -+ pinctrl-0 = <&pcie1_pins>; ++ pinctrl-0 = <&pcie0_pins>; + pinctrl-names = "default"; + }; + + pcie1: pci@1b700000 { + status = "ok"; + reset-gpio = <&qcom_pinmux 48 0>; -+ pinctrl-0 = <&pcie2_pins>; ++ pinctrl-0 = <&pcie1_pins>; + pinctrl-names = "default"; + }; + + pcie2: pci@1b900000 { + status = "ok"; + reset-gpio = <&qcom_pinmux 63 0>; -+ pinctrl-0 = <&pcie3_pins>; ++ pinctrl-0 = <&pcie2_pins>; + pinctrl-names = "default"; + }; }; @@ -259,10 +259,3 @@ Signed-off-by: Mathieu Olivari hs_phy_1: phy@100f8800 { compatible = "qcom,dwc3-hs-usb-phy"; reg = <0x100f8800 0x30>; -@@ -389,6 +514,5 @@ - dr_mode = "host"; - }; - }; -- - }; - }; diff --git a/target/linux/ipq806x/patches-3.18/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch b/target/linux/ipq806x/patches-3.18/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch index 809d74372b..851682a9aa 100644 --- a/target/linux/ipq806x/patches-3.18/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch +++ b/target/linux/ipq806x/patches-3.18/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch @@ -11,7 +11,7 @@ Signed-off-by: Mathieu Olivari --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts -@@ -14,8 +14,9 @@ +@@ -19,8 +19,9 @@ }; }; @@ -22,7 +22,7 @@ Signed-off-by: Mathieu Olivari }; chosen { -@@ -54,6 +55,15 @@ +@@ -59,6 +60,15 @@ bias-none; }; }; @@ -38,8 +38,8 @@ Signed-off-by: Mathieu Olivari }; gsbi@16300000 { -@@ -163,5 +173,33 @@ - pinctrl-0 = <&pcie2_pins>; +@@ -168,5 +178,33 @@ + pinctrl-0 = <&pcie1_pins>; pinctrl-names = "default"; }; + @@ -99,7 +99,7 @@ Signed-off-by: Mathieu Olivari gsbi2: gsbi@12480000 { @@ -173,5 +183,44 @@ - pinctrl-0 = <&pcie3_pins>; + pinctrl-0 = <&pcie2_pins>; pinctrl-names = "default"; }; + diff --git a/target/linux/ipq806x/patches-3.18/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch b/target/linux/ipq806x/patches-3.18/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch index cce30b09a2..c7177d45d4 100644 --- a/target/linux/ipq806x/patches-3.18/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch +++ b/target/linux/ipq806x/patches-3.18/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch @@ -12,7 +12,7 @@ Signed-off-by: Mathieu Olivari --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts -@@ -64,6 +64,16 @@ +@@ -71,6 +71,16 @@ bias-disable; }; }; @@ -29,7 +29,7 @@ Signed-off-by: Mathieu Olivari }; gsbi@16300000 { -@@ -201,5 +211,26 @@ +@@ -208,5 +218,26 @@ reg = <4>; }; }; @@ -58,7 +58,7 @@ Signed-off-by: Mathieu Olivari }; --- a/arch/arm/boot/dts/qcom-ipq8064-db149.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts -@@ -72,6 +72,14 @@ +@@ -75,6 +75,14 @@ bias-disable; }; }; @@ -73,7 +73,7 @@ Signed-off-by: Mathieu Olivari }; gsbi2: gsbi@12480000 { -@@ -222,5 +230,40 @@ +@@ -225,5 +233,40 @@ reg = <7>; }; }; @@ -116,11 +116,10 @@ Signed-off-by: Mathieu Olivari }; --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -638,5 +638,91 @@ - dr_mode = "host"; +@@ -657,5 +657,90 @@ }; }; -+ + + nss_common: syscon@03000000 { + compatible = "syscon"; + reg = <0x03000000 0x0000FFFF>; diff --git a/target/linux/ipq806x/patches-4.1/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch b/target/linux/ipq806x/patches-4.1/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch index e494d32881..df96ad5878 100644 --- a/target/linux/ipq806x/patches-4.1/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch +++ b/target/linux/ipq806x/patches-4.1/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch @@ -19,7 +19,7 @@ Signed-off-by: Mathieu Olivari bias-disable; }; -+ pcie1_pins: pcie1_pinmux { ++ pcie0_pins: pcie0_pinmux { + mux { + pins = "gpio3"; + drive-strength = <2>; @@ -27,7 +27,7 @@ Signed-off-by: Mathieu Olivari + }; + }; + -+ pcie2_pins: pcie2_pinmux { ++ pcie1_pins: pcie1_pinmux { + mux { + pins = "gpio48"; + drive-strength = <2>; @@ -46,14 +46,14 @@ Signed-off-by: Mathieu Olivari + pcie0: pci@1b500000 { + status = "ok"; + reset-gpio = <&qcom_pinmux 3 0>; -+ pinctrl-0 = <&pcie1_pins>; ++ pinctrl-0 = <&pcie0_pins>; + pinctrl-names = "default"; + }; + + pcie1: pci@1b700000 { + status = "ok"; + reset-gpio = <&qcom_pinmux 48 0>; -+ pinctrl-0 = <&pcie2_pins>; ++ pinctrl-0 = <&pcie1_pins>; + pinctrl-names = "default"; + }; }; @@ -64,7 +64,7 @@ Signed-off-by: Mathieu Olivari bias-disable; }; -+ pcie1_pins: pcie1_pinmux { ++ pcie0_pins: pcie0_pinmux { + mux { + pins = "gpio3"; + drive-strength = <2>; @@ -72,7 +72,7 @@ Signed-off-by: Mathieu Olivari + }; + }; + -+ pcie2_pins: pcie2_pinmux { ++ pcie1_pins: pcie1_pinmux { + mux { + pins = "gpio48"; + drive-strength = <2>; @@ -80,7 +80,7 @@ Signed-off-by: Mathieu Olivari + }; + }; + -+ pcie3_pins: pcie3_pinmux { ++ pcie2_pins: pcie2_pinmux { + mux { + pins = "gpio63"; + drive-strength = <2>; @@ -99,21 +99,21 @@ Signed-off-by: Mathieu Olivari + pcie0: pci@1b500000 { + status = "ok"; + reset-gpio = <&qcom_pinmux 3 0>; -+ pinctrl-0 = <&pcie1_pins>; ++ pinctrl-0 = <&pcie0_pins>; + pinctrl-names = "default"; + }; + + pcie1: pci@1b700000 { + status = "ok"; + reset-gpio = <&qcom_pinmux 48 0>; -+ pinctrl-0 = <&pcie2_pins>; ++ pinctrl-0 = <&pcie1_pins>; + pinctrl-names = "default"; + }; + + pcie2: pci@1b900000 { + status = "ok"; + reset-gpio = <&qcom_pinmux 63 0>; -+ pinctrl-0 = <&pcie3_pins>; ++ pinctrl-0 = <&pcie2_pins>; + pinctrl-names = "default"; + }; }; @@ -125,11 +125,11 @@ Signed-off-by: Mathieu Olivari #include #include +#include -+#include ++#include / { model = "Qualcomm IPQ8064"; -@@ -329,5 +331,128 @@ +@@ -329,5 +331,127 @@ #reset-cells = <1>; }; @@ -255,6 +255,5 @@ Signed-off-by: Mathieu Olivari + + status = "disabled"; + }; -+ }; }; diff --git a/target/linux/ipq806x/patches-4.1/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch b/target/linux/ipq806x/patches-4.1/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch index 846f7384d1..f327050410 100644 --- a/target/linux/ipq806x/patches-4.1/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch +++ b/target/linux/ipq806x/patches-4.1/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch @@ -39,7 +39,7 @@ Signed-off-by: Mathieu Olivari gsbi@16300000 { @@ -144,5 +154,33 @@ - pinctrl-0 = <&pcie2_pins>; + pinctrl-0 = <&pcie1_pins>; pinctrl-names = "default"; }; + @@ -99,7 +99,7 @@ Signed-off-by: Mathieu Olivari gsbi2: gsbi@12480000 { @@ -173,5 +183,44 @@ - pinctrl-0 = <&pcie3_pins>; + pinctrl-0 = <&pcie2_pins>; pinctrl-names = "default"; }; + diff --git a/target/linux/ipq806x/patches-4.1/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch b/target/linux/ipq806x/patches-4.1/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch index 80197139ff..7f290d9384 100644 --- a/target/linux/ipq806x/patches-4.1/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch +++ b/target/linux/ipq806x/patches-4.1/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch @@ -116,10 +116,11 @@ Signed-off-by: Mathieu Olivari }; --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -578,5 +578,91 @@ +@@ -577,5 +577,91 @@ + status = "disabled"; }; - ++ + nss_common: syscon@03000000 { + compatible = "syscon"; + reg = <0x03000000 0x0000FFFF>; @@ -205,6 +206,5 @@ Signed-off-by: Mathieu Olivari + + status = "disabled"; + }; -+ }; };