From: Roger Pueyo Centelles Date: Fri, 9 Apr 2021 15:12:31 +0000 (+0200) Subject: ath79: mikrotik: update nand-rb4xx driver X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f724a583dcf70bc02bca1750bfb4a5195130b141;p=openwrt%2Fstaging%2Flinusw.git ath79: mikrotik: update nand-rb4xx driver This updates the NAND driver for MikroTik RB4XX series to work with kernel 5.10, similarly to the ar934x-nand driver (fb64e2c3). Support for kernel 5.10 was added to all ath79 subtargets except for the mikrotik one by commit d6b785d, since patch 920-mikrotik-rb4xx.patch needed to be reworked. Later, commit f8512661 enabled kernel 5.10 for the mikrotik subtarget with the nand-rb4xx driver still pending, which is updated and added back by this patch. Compile-tested only. Signed-off-by: Roger Pueyo Centelles --- diff --git a/target/linux/ath79/files/drivers/mtd/nand/raw/nand_rb4xx.c b/target/linux/ath79/files/drivers/mtd/nand/raw/nand_rb4xx.c index 50bd69f6a4..22e2660b38 100644 --- a/target/linux/ath79/files/drivers/mtd/nand/raw/nand_rb4xx.c +++ b/target/linux/ath79/files/drivers/mtd/nand/raw/nand_rb4xx.c @@ -188,10 +188,15 @@ static int rb4xx_nand_probe(struct platform_device *pdev) if (mtd->writesize == 512) mtd_set_ooblayout(mtd, &rb4xx_nand_ecclayout_ops); - nand->chip.ecc.mode = NAND_ECC_SOFT; - nand->chip.ecc.algo = NAND_ECC_HAMMING; - nand->chip.options = NAND_NO_SUBPAGE_WRITE; - nand->chip.priv = nand; +#if LINUX_VERSION_CODE >= KERNEL_VERSION(5,9,0) + nand->chip.ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT; + nand->chip.ecc.algo = NAND_ECC_ALGO_HAMMING; +#else + nand->chip.ecc.mode = NAND_ECC_SOFT; + nand->chip.ecc.algo = NAND_ECC_HAMMING; +#endif + nand->chip.options = NAND_NO_SUBPAGE_WRITE; + nand->chip.priv = nand; nand->chip.legacy.read_byte = rb4xx_nand_read_byte; nand->chip.legacy.write_buf = rb4xx_nand_write_buf; @@ -206,7 +211,12 @@ static int rb4xx_nand_probe(struct platform_device *pdev) ret = mtd_device_register(mtd, NULL, 0); if (ret) { +#if LINUX_VERSION_CODE >= KERNEL_VERSION(5,8,0) + mtd_device_unregister(nand_to_mtd(&nand->chip)); + nand_cleanup(&nand->chip); +#else nand_release(&nand->chip); +#endif return ret; } @@ -217,7 +227,12 @@ static int rb4xx_nand_remove(struct platform_device *pdev) { struct rb4xx_nand *nand = platform_get_drvdata(pdev); - nand_release(&nand->chip); +#if LINUX_VERSION_CODE >= KERNEL_VERSION(5,8,0) + mtd_device_unregister(nand_to_mtd(&nand->chip)); + nand_cleanup(&nand->chip); +#else + nand_release(&nand->chip); +#endif return 0; } diff --git a/target/linux/ath79/patches-5.10/0052-mtd-spi-nor-use-4-bit-locking-for-MX25L12805D.patch b/target/linux/ath79/patches-5.10/0052-mtd-spi-nor-use-4-bit-locking-for-MX25L12805D.patch index e27a95d9e9..317bef2201 100644 --- a/target/linux/ath79/patches-5.10/0052-mtd-spi-nor-use-4-bit-locking-for-MX25L12805D.patch +++ b/target/linux/ath79/patches-5.10/0052-mtd-spi-nor-use-4-bit-locking-for-MX25L12805D.patch @@ -19,11 +19,9 @@ Signed-off-by: David Bauer drivers/mtd/spi-nor/macronix.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) -diff --git a/drivers/mtd/spi-nor/macronix.c b/drivers/mtd/spi-nor/macronix.c -index 2d39dd32a64e..ed8b56a0102f 100644 --- a/drivers/mtd/spi-nor/macronix.c +++ b/drivers/mtd/spi-nor/macronix.c -@@ -50,7 +50,8 @@ static const struct flash_info macronix_parts[] = { +@@ -50,7 +50,8 @@ static const struct flash_info macronix_ { "mx25u4035", INFO(0xc22533, 0, 64 * 1024, 8, SECT_4K) }, { "mx25u8035", INFO(0xc22534, 0, 64 * 1024, 16, SECT_4K) }, { "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) }, @@ -33,6 +31,3 @@ index 2d39dd32a64e..ed8b56a0102f 100644 { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) }, { "mx25r1635f", INFO(0xc22815, 0, 64 * 1024, 32, SECT_4K | SPI_NOR_DUAL_READ | --- -2.31.1 - diff --git a/target/linux/ath79/patches-5.10/410-spi-ath79-Implement-the-spi_mem-interface.patch b/target/linux/ath79/patches-5.10/410-spi-ath79-Implement-the-spi_mem-interface.patch index 51a71c6ef2..2a6b9857fb 100644 --- a/target/linux/ath79/patches-5.10/410-spi-ath79-Implement-the-spi_mem-interface.patch +++ b/target/linux/ath79/patches-5.10/410-spi-ath79-Implement-the-spi_mem-interface.patch @@ -58,7 +58,7 @@ Signed-off-by: Luiz Angelo Daros de Luca static int ath79_spi_probe(struct platform_device *pdev) { struct spi_master *master; -@@ -164,6 +198,7 @@ static int ath79_spi_probe(struct platfo +@@ -163,6 +197,7 @@ static int ath79_spi_probe(struct platfo ret = PTR_ERR(sp->base); goto err_put_master; } diff --git a/target/linux/ath79/patches-5.10/920-mikrotik-rb4xx.patch b/target/linux/ath79/patches-5.10/920-mikrotik-rb4xx.patch new file mode 100644 index 0000000000..25ea1abe56 --- /dev/null +++ b/target/linux/ath79/patches-5.10/920-mikrotik-rb4xx.patch @@ -0,0 +1,76 @@ +--- a/drivers/mfd/Kconfig ++++ b/drivers/mfd/Kconfig +@@ -2141,6 +2141,14 @@ config RAVE_SP_CORE + Select this to get support for the Supervisory Processor + device found on several devices in RAVE line of hardware. + ++config MFD_RB4XX_CPLD ++ tristate "CPLD driver for Mikrotik RB4xx series boards ++ select MFD_CORE ++ depends on ATH79 || COMPILE_TEST ++ help ++ Enables support for the CPLD chip (NAND & GPIO) on Mikrotik ++ Routerboard RB4xx series. ++ + config SGI_MFD_IOC3 + tristate "SGI IOC3 core driver" + depends on PCI && MIPS && 64BIT +--- a/drivers/mfd/Makefile ++++ b/drivers/mfd/Makefile +@@ -264,6 +264,7 @@ obj-$(CONFIG_MFD_ROHM_BD718XX) += rohm-b + obj-$(CONFIG_MFD_STMFX) += stmfx.o + obj-$(CONFIG_MFD_KHADAS_MCU) += khadas-mcu.o + ++obj-$(CONFIG_MFD_RB4XX_CPLD) += rb4xx-cpld.o + obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o + obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o + obj-$(CONFIG_MFD_INTEL_M10_BMC) += intel-m10-bmc.o +--- a/drivers/gpio/Kconfig ++++ b/drivers/gpio/Kconfig +@@ -1518,6 +1518,12 @@ config GPIO_SODAVILLE + help + Say Y here to support Intel Sodaville GPIO. + ++config GPIO_RB4XX ++ tristate "GPIO expander for Mikrotik RB4xx series boards" ++ depends on MFD_RB4XX_CPLD ++ help ++ GPIO driver for Mikrotik Routerboard RB4xx series. ++ + endmenu + + menu "SPI GPIO expanders" +--- a/drivers/gpio/Makefile ++++ b/drivers/gpio/Makefile +@@ -120,6 +120,7 @@ obj-$(CONFIG_GPIO_PL061) += gpio-pl061. + obj-$(CONFIG_GPIO_PMIC_EIC_SPRD) += gpio-pmic-eic-sprd.o + obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o + obj-$(CONFIG_GPIO_RASPBERRYPI_EXP) += gpio-raspberrypi-exp.o ++obj-$(CONFIG_GPIO_RB4XX) += gpio-rb4xx.o + obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o + obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o + obj-$(CONFIG_GPIO_RDA) += gpio-rda.o +--- a/drivers/mtd/nand/raw/Kconfig ++++ b/drivers/mtd/nand/raw/Kconfig +@@ -564,4 +564,11 @@ config MTD_NAND_AR934X + Enables support for NAND controller on Qualcomm Atheros SoCs. + This controller is found on AR934x and QCA955x SoCs. + ++config MTD_NAND_RB4XX ++ tristate "Support for NAND driver for Mikrotik RB4xx series boards" ++ depends on MFD_RB4XX_CPLD ++ help ++ Enables support for the NAND flash chip on Mikrotik Routerboard ++ RB4xx series. ++ + endif # MTD_RAW_NAND +--- a/drivers/mtd/nand/raw/Makefile ++++ b/drivers/mtd/nand/raw/Makefile +@@ -59,6 +59,7 @@ obj-$(CONFIG_MTD_NAND_MESON) += meson_n + obj-$(CONFIG_MTD_NAND_CADENCE) += cadence-nand-controller.o + obj-$(CONFIG_MTD_NAND_ARASAN) += arasan-nand-controller.o + obj-$(CONFIG_MTD_NAND_AR934X) += ar934x_nand.o ++obj-$(CONFIG_MTD_NAND_RB4XX) += nand_rb4xx.o + + nand-objs := nand_base.o nand_legacy.o nand_bbt.o nand_timings.o nand_ids.o + nand-objs += nand_onfi.o