From: Leon M. Busch-George Date: Sat, 12 Nov 2022 18:31:41 +0000 (+0100) Subject: ramips: add support for Cudy M1800 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f6d394e9f2fd41547236c092ac914322220eb77c;p=openwrt%2Fstaging%2Fthess.git ramips: add support for Cudy M1800 Specifications SoC: MT7621 CPU: 880 MHz Flash: 32 MiB RAM: 256 MiB WLAN: MT7915 WiFi 6 (2.4/5 GHz) Ethernet: 2x Gbit ports MAC LAN b4:4b:d6:2e:c7:b0 (label) WAN b4:4b:d6:2e:c7:b1 WiFi 2.4 00:0c:43:26:46:08 WiFi 5 00:0c:43:26:59:97 Installation There are two known options: 1) The Luci-based UI. 2) Press and hold the reset button during power up. The router will request 'recovery.bin' from a TFTP server at 192.168.1.88. Both options require a signed firmware binary. The openwrt image supplied by cudy is signed and can be used to install unsigned images. Signed-off-by: Leon M. Busch-George --- diff --git a/target/linux/ramips/dts/mt7621_cudy_m1800.dts b/target/linux/ramips/dts/mt7621_cudy_m1800.dts new file mode 100644 index 0000000000..314fdb206c --- /dev/null +++ b/target/linux/ramips/dts/mt7621_cudy_m1800.dts @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621.dtsi" + +#include +#include + +/ { + compatible = "cudy,m1800", "mediatek,mt7621-soc"; + model = "Cudy M1800"; + + aliases { + led-boot = &led_internet_white; + led-failsafe = &led_internet_white; + led-running = &led_internet_white; + led-upgrade = &led_internet_white; + label-mac-device = &gmac0; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_internet_white: internet-white { + label = "white:internet"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + + internet-red { + label = "red:internet"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gmac0 { + nvmem-cells = <&macaddr_bdinfo_de00>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <1>; +}; + +&gmac1 { + status = "okay"; + label = "lan"; + phy-handle = <ðphy4>; + + nvmem-cells = <&macaddr_bdinfo_de00>; + nvmem-cell-names = "mac-address"; +}; + +&mdio { + ethphy4: ethernet-phy@4 { + reg = <4>; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x0000>; + mediatek,disable-radar-background; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + m25p,fast-read; + broken-flash-reset; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + + partition@1000000 { + label = "app"; + reg = <0x1000000 0xfd0000>; + read-only; + }; + + partition@1fd0000 { + label = "debug"; + reg = <0x1fd0000 0x10000>; + read-only; + }; + + partition@1fe0000 { + label = "backup"; + reg = <0x1fe0000 0x10000>; + read-only; + }; + + partition@1ff0000 { + label = "bdinfo"; + reg = <0x1ff0000 0x10000>; + read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_bdinfo_de00: macaddr@de00 { + reg = <0xde00 0x6>; + }; + }; + }; + }; +}; + +&state_default { + gpio { + groups = "jtag", "uart3"; + function = "gpio"; + }; +}; + +&switch0 { + ports { + port@3 { + status = "okay"; + label = "wan"; + }; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 1b4e1dc039..2fc193634b 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -426,6 +426,16 @@ define Device/bolt_arion endef TARGET_DEVICES += bolt_arion +define Device/cudy_m1800 + $(Device/dsa-migration) + DEVICE_VENDOR := Cudy + DEVICE_MODEL := M1800 + IMAGE_SIZE := 16064k + UIMAGE_NAME := R17 + DEVICE_PACKAGES := kmod-mt7915e +endef +TARGET_DEVICES += cudy_m1800 + define Device/cudy_wr1300-v1 $(Device/dsa-migration) IMAGE_SIZE := 15872k diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index f0ac4f1c4f..dea433dec4 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -78,6 +78,11 @@ ramips_setup_interfaces() uci add_list firewall.@zone[1].network='eth_data' uci add_list firewall.@zone[1].network='eth_om' ;; + cudy,m1800|\ + yuncore,ax820|\ + zyxel,nt7101) + ucidef_set_interfaces_lan_wan "lan" "wan" + ;; gnubee,gb-pc1) ucidef_set_interface_lan "ethblack ethblue" ;; @@ -117,10 +122,6 @@ ramips_setup_interfaces() ubnt,usw-flex) ucidef_set_interface_lan "lan1 lan2 lan3 lan4 lan5" ;; - yuncore,ax820|\ - zyxel,nr7101) - ucidef_set_interfaces_lan_wan "lan" "wan" - ;; zyxel,wap6805) ucidef_set_interface_lan "lan1 lan2 lan3 lan4" ucidef_set_interface "qtn" ifname "eth1" protocol "static" ipaddr "1.1.1.1" netmask "255.255.255.0"