From: John Crispin Date: Sat, 9 Apr 2016 10:26:41 +0000 (+0000) Subject: ar71xx: add support for Compex WPJ342 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f690322a09efde27146ca033e2d3676619d3c885;p=openwrt%2Fsvn-archive%2Farchive.git ar71xx: add support for Compex WPJ342 OpenWrt can be flashed with following uboot commands: tftpboot 0x80500000 openwrt-ar71xx-generic-wpj342-16M-squashfs-sysupgrade.bin erase 0x9f030000 +$filesize cp.b $fileaddr 0x9f030000 $filesize Signed-off-by: Christian Mehlis SVN-Revision: 49157 --- diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index bd488a26ff..c6a20149b5 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -405,6 +405,11 @@ gl-ar300) "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" ;; +wpj342) + ucidef_add_switch "switch0" \ + "0@eth0" "1:lan" "2:wan" + ;; + wpj344) ucidef_add_switch "switch0" \ "0@eth0" "3:lan" "2:wan" diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 783a4e6478..1cf6e4c301 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -389,6 +389,9 @@ get_status_led() { wp543) status_led="wp543:green:diag" ;; + wpj342) + status_led="wpj342:green:sig3" + ;; wpj344) status_led="wpj344:green:status" ;; diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 9c19e23e4d..b3eda6c469 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -967,6 +967,9 @@ ar71xx_board_detect() { *WPE72) name="wpe72" ;; + *WPJ342) + name="wpj342" + ;; *WPJ344) name="wpj344" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 2d61638bf7..86375a9acc 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -255,6 +255,7 @@ platform_check_image() { rw2458n | \ wpj531 | \ wndap360 | \ + wpj342 | \ wpj344 | \ wzr-hp-g300nh2 | \ wzr-hp-g300nh | \ diff --git a/target/linux/ar71xx/config-4.1 b/target/linux/ar71xx/config-4.1 index 087f027c07..4dbb6ae5d3 100644 --- a/target/linux/ar71xx/config-4.1 +++ b/target/linux/ar71xx/config-4.1 @@ -178,6 +178,7 @@ CONFIG_ATH79_MACH_WNR2000_V4=y CONFIG_ATH79_MACH_WNR2200=y CONFIG_ATH79_MACH_WP543=y CONFIG_ATH79_MACH_WPE72=y +CONFIG_ATH79_MACH_WPJ342=y CONFIG_ATH79_MACH_WPJ344=y CONFIG_ATH79_MACH_WPJ531=y CONFIG_ATH79_MACH_WPJ558=y diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index b6842923e3..ec04c28eb8 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -181,6 +181,7 @@ CONFIG_ATH79_MACH_WNR2000_V4=y CONFIG_ATH79_MACH_WNR2200=y CONFIG_ATH79_MACH_WP543=y CONFIG_ATH79_MACH_WPE72=y +CONFIG_ATH79_MACH_WPJ342=y CONFIG_ATH79_MACH_WPJ344=y CONFIG_ATH79_MACH_WPJ531=y CONFIG_ATH79_MACH_WPJ558=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 1d6c4d6c28..a884f35c0a 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -346,6 +346,16 @@ config ATH79_MACH_WPE72 select ATH79_DEV_USB select MYLOADER +config ATH79_MACH_WPJ342 + bool "Compex WPJ342 board support" + select SOC_AS934X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + config ATH79_MACH_WPJ344 bool "Compex WPJ344 board support" select SOC_AS934X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index 75f16708d4..59cc50709d 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -185,6 +185,7 @@ obj-$(CONFIG_ATH79_MACH_WNR2000_V4) += mach-wnr2000-v4.o obj-$(CONFIG_ATH79_MACH_WNR2200) += mach-wnr2200.o obj-$(CONFIG_ATH79_MACH_WP543) += mach-wp543.o obj-$(CONFIG_ATH79_MACH_WPE72) += mach-wpe72.o +obj-$(CONFIG_ATH79_MACH_WPJ342) += mach-wpj342.o obj-$(CONFIG_ATH79_MACH_WPJ344) += mach-wpj344.o obj-$(CONFIG_ATH79_MACH_WPJ531) += mach-wpj531.o obj-$(CONFIG_ATH79_MACH_WPJ558) += mach-wpj558.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj342.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj342.c new file mode 100644 index 0000000000..8cc1e70f82 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj342.c @@ -0,0 +1,178 @@ +/* + * Compex WPJ342 board support + * + * Copyright (c) 2011 Qualcomm Atheros + * Copyright (c) 2011-2012 Gabor Juhos + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "pci.h" +#include "common.h" +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-nfc.h" +#include "dev-spi.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define WPJ342_GPIO_LED_STATUS 11 +#define WPJ342_GPIO_LED_SIG1 14 +#define WPJ342_GPIO_LED_SIG2 13 +#define WPJ342_GPIO_LED_SIG3 12 +#define WPJ342_GPIO_LED_SIG4 11 +#define WPJ342_GPIO_BUZZER 15 + +#define WPJ342_GPIO_BTN_RESET 17 + +#define WPJ342_KEYS_POLL_INTERVAL 20 /* msecs */ +#define WPJ342_KEYS_DEBOUNCE_INTERVAL (3 * WPJ342_KEYS_POLL_INTERVAL) + +#define WPJ342_MAC0_OFFSET 0x10 +#define WPJ342_MAC1_OFFSET 0x18 +#define WPJ342_WMAC_CALDATA_OFFSET 0x1000 +#define WPJ342_PCIE_CALDATA_OFFSET 0x5000 + +#define WPJ342_ART_SIZE 0x8000 + +static struct gpio_led wpj342_leds_gpio[] __initdata = { + { + .name = "wpj342:red:sig1", + .gpio = WPJ342_GPIO_LED_SIG1, + .active_low = 1, + }, + { + .name = "wpj342:yellow:sig2", + .gpio = WPJ342_GPIO_LED_SIG2, + .active_low = 1, + }, + { + .name = "wpj342:green:sig3", + .gpio = WPJ342_GPIO_LED_SIG3, + .active_low = 1, + }, + { + .name = "wpj342:green:sig4", + .gpio = WPJ342_GPIO_LED_SIG4, + .active_low = 1, + }, + { + .name = "wpj342:buzzer", + .gpio = WPJ342_GPIO_BUZZER, + .active_low = 0, + } +}; + +static struct gpio_keys_button wpj342_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WPJ342_KEYS_DEBOUNCE_INTERVAL, + .gpio = WPJ342_GPIO_BTN_RESET, + .active_low = 1, + }, +}; + +static struct ar8327_pad_cfg wpj342_ar8327_pad0_cfg = { + .mode = AR8327_PAD_MAC_RGMII, + .txclk_delay_en = true, + .rxclk_delay_en = true, + .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, + .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, +}; + +static struct ar8327_led_cfg wpj342_ar8327_led_cfg = { + .led_ctrl0 = 0x00000000, + .led_ctrl1 = 0xc737c737, + .led_ctrl2 = 0x00000000, + .led_ctrl3 = 0x00c30c00, + .open_drain = true, +}; + +static struct ar8327_platform_data wpj342_ar8327_data = { + .pad0_cfg = &wpj342_ar8327_pad0_cfg, + .port0_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + }, + .led_cfg = &wpj342_ar8327_led_cfg, +}; + +static struct mdio_board_info wpj342_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 0, + .platform_data = &wpj342_ar8327_data, + }, +}; + + +static void __init wpj342_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + u8 *mac = (u8 *) KSEG1ADDR(0x1f02e000); + + ath79_register_m25p80(NULL); + ath79_register_leds_gpio(-1, ARRAY_SIZE(wpj342_leds_gpio), + wpj342_leds_gpio); + + ath79_register_gpio_keys_polled(-1, WPJ342_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wpj342_gpio_keys), + wpj342_gpio_keys); + + ath79_register_usb(); + + ath79_register_wmac(art + WPJ342_WMAC_CALDATA_OFFSET, NULL); + + ath79_register_pci(); + + mdiobus_register_board_info(wpj342_mdio0_info, + ARRAY_SIZE(wpj342_mdio0_info)); + + ath79_register_mdio(1, 0x0); + ath79_register_mdio(0, 0x0); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac + WPJ342_MAC0_OFFSET, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, mac + WPJ342_MAC1_OFFSET, 0); + + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0); + + /* GMAC0 is connected to an AR8236 switch */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_eth0_pll_data.pll_1000 = 0x06000000; + + ath79_register_eth(0); +} + +MIPS_MACHINE(ATH79_MACH_WPJ342, "WPJ342", "Compex WPJ342", wpj342_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index bcc13ec447..15e32642dd 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -239,6 +239,7 @@ enum ath79_mach_type { ATH79_MACH_WPN824N, /* NETGEAR WPN824N */ ATH79_MACH_WP543, /* Compex WP543 */ ATH79_MACH_WPE72, /* Compex WPE72 */ + ATH79_MACH_WPJ342, /* Compex WPJ342 */ ATH79_MACH_WPJ344, /* Compex WPJ344 */ ATH79_MACH_WPJ531, /* Compex WPJ531 */ ATH79_MACH_WPJ558, /* Compex WPJ558 */ diff --git a/target/linux/ar71xx/generic/profiles/compex.mk b/target/linux/ar71xx/generic/profiles/compex.mk index 2f6e0b2211..54d8503c70 100644 --- a/target/linux/ar71xx/generic/profiles/compex.mk +++ b/target/linux/ar71xx/generic/profiles/compex.mk @@ -27,6 +27,16 @@ endef $(eval $(call Profile,WPE72)) +define Profile/WPJ342 + NAME:=Compex WPJ342 +endef + +define Profile/WPJ342/Description + Package set optimized for the Compex WPJ342 board. +endef + +$(eval $(call Profile,WPJ342)) + define Profile/WPJ344 NAME:=Compex WPJ344 endef diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index eb7a7f0330..cacdd50bac 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -1621,6 +1621,7 @@ uap_pro_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1536k(kernel) ubdev_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware),64k(certs),256k(cfg)ro,64k(EEPROM)ro whrhpg300n_mtdlayout=mtdparts=spi0.0:248k(u-boot)ro,8k(u-boot-env)ro,3712k(firmware),64k(art)ro wlr8100_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),14080k(rootfs),192k(unknown)ro,64k(art)ro,384k(unknown2)ro,15488k@0x40000(firmware) +wpj342_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro wpj344_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro dr344_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware) wpj531_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro @@ -2395,6 +2396,7 @@ $(eval $(call SingleProfile,AthLzma,64k,MR16,mr16,MR16,ttyS0,115200,$$(mr16_mtdl $(eval $(call SingleProfile,AthLzma,64k,PB92,pb92,PB92,ttyS0,115200,$$(pb92_mtdlayout),KRuImage)) $(eval $(call SingleProfile,AthLzma,64k,TUBE2H16M,tube2h-16M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536)) $(eval $(call SingleProfile,AthLzma,64k,WLR8100,wlr8100,WLR8100,ttyS0,115200,$$(wlr8100_mtdlayout),KRuImage)) +$(eval $(call SingleProfile,AthLzma,64k,WPJ342_16M,wpj342-16M,WPJ342,ttyS0,115200,$$(wpj342_mtdlayout_16M),KRuImage,65536)) $(eval $(call SingleProfile,AthLzma,64k,WPJ344_16M,wpj344-16M,WPJ344,ttyS0,115200,$$(wpj344_mtdlayout_16M),KRuImage,65536)) $(eval $(call SingleProfile,AthLzma,64k,DR344,dr344,DR344,ttyS0,115200,$$(dr344_mtdlayout),RKuImage)) $(eval $(call SingleProfile,AthLzma,64k,WPJ531_16M,wpj531-16M,WPJ531,ttyS0,115200,$$(wpj531_mtdlayout_16M),KRuImage,65536)) @@ -2526,6 +2528,7 @@ $(eval $(call MultiProfile,WNR612V2,REALWNR612V2 N150R)) $(eval $(call MultiProfile,WNR1000V2,REALWNR1000V2 WNR1000V2_VC)) $(eval $(call MultiProfile,WP543,WP543_2M WP543_4M WP543_8M WP543_16M)) $(eval $(call MultiProfile,WPE72,WPE72_4M WPE72_8M WPE72_16M)) +$(eval $(call MultiProfile,WPJ342,WPJ342_16M)) $(eval $(call MultiProfile,WPJ344,WPJ344_16M)) $(eval $(call MultiProfile,WPJ531,WPJ531_16M)) $(eval $(call MultiProfile,WPJ558,WPJ558_16M)) diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default index 3b9431eac7..094f2ae88c 100644 --- a/target/linux/ar71xx/mikrotik/config-default +++ b/target/linux/ar71xx/mikrotik/config-default @@ -117,6 +117,7 @@ CONFIG_ATH79_MACH_RBSXTLITE=y # CONFIG_ATH79_MACH_WNR2200 is not set # CONFIG_ATH79_MACH_WP543 is not set # CONFIG_ATH79_MACH_WPE72 is not set +# CONFIG_ATH79_MACH_WPJ342 is not set # CONFIG_ATH79_MACH_WPJ344 is not set # CONFIG_ATH79_MACH_WPJ531 is not set # CONFIG_ATH79_MACH_WPJ558 is not set