From: Rafał Miłecki Date: Thu, 26 Jan 2017 10:27:50 +0000 (+0100) Subject: kernel: update Broadcom PHY drivers X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f67b0276b6438c7ac29349bad43787cfc74a3937;p=openwrt%2Fstaging%2Fblocktrron.git kernel: update Broadcom PHY drivers This commit adds 4 patches, one per kernel version that was used for picking updates. This adds support for few new PHYs. Signed-off-by: Rafał Miłecki --- diff --git a/target/linux/generic/patches-4.4/078-0001-net-phy-update-Broadcom-drivers-to-v4.5.patch b/target/linux/generic/patches-4.4/078-0001-net-phy-update-Broadcom-drivers-to-v4.5.patch new file mode 100644 index 0000000000..222d126f69 --- /dev/null +++ b/target/linux/generic/patches-4.4/078-0001-net-phy-update-Broadcom-drivers-to-v4.5.patch @@ -0,0 +1,125 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Subject: [PATCH 1/4] net: phy: update Broadcom drivers to v4.5 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Signed-off-by: Rafał Miłecki +--- + +--- a/drivers/net/phy/bcm7xxx.c ++++ b/drivers/net/phy/bcm7xxx.c +@@ -250,10 +250,6 @@ static int bcm7xxx_config_init(struct ph + phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XX_64CLK_MDIO); + phy_read(phydev, MII_BCM7XXX_AUX_MODE); + +- /* Workaround only required for 100Mbits/sec capable PHYs */ +- if (phydev->supported & PHY_GBIT_FEATURES) +- return 0; +- + /* set shadow mode 2 */ + ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, + MII_BCM7XXX_SHD_MODE_2, MII_BCM7XXX_SHD_MODE_2); +@@ -270,7 +266,7 @@ static int bcm7xxx_config_init(struct ph + phy_write(phydev, MII_BCM7XXX_100TX_FALSE_CAR, 0x7555); + + /* reset shadow mode 2 */ +- ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, MII_BCM7XXX_SHD_MODE_2, 0); ++ ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0, MII_BCM7XXX_SHD_MODE_2); + if (ret < 0) + return ret; + +@@ -307,11 +303,6 @@ static int bcm7xxx_suspend(struct phy_de + return 0; + } + +-static int bcm7xxx_dummy_config_init(struct phy_device *phydev) +-{ +- return 0; +-} +- + #define BCM7XXX_28NM_GPHY(_oui, _name) \ + { \ + .phy_id = (_oui), \ +@@ -338,7 +329,7 @@ static struct phy_driver bcm7xxx_driver[ + .phy_id = PHY_ID_BCM7425, + .phy_id_mask = 0xfffffff0, + .name = "Broadcom BCM7425", +- .features = PHY_GBIT_FEATURES | ++ .features = PHY_BASIC_FEATURES | + SUPPORTED_Pause | SUPPORTED_Asym_Pause, + .flags = PHY_IS_INTERNAL, + .config_init = bcm7xxx_config_init, +@@ -351,7 +342,7 @@ static struct phy_driver bcm7xxx_driver[ + .phy_id = PHY_ID_BCM7429, + .phy_id_mask = 0xfffffff0, + .name = "Broadcom BCM7429", +- .features = PHY_GBIT_FEATURES | ++ .features = PHY_BASIC_FEATURES | + SUPPORTED_Pause | SUPPORTED_Asym_Pause, + .flags = PHY_IS_INTERNAL, + .config_init = bcm7xxx_config_init, +@@ -361,31 +352,18 @@ static struct phy_driver bcm7xxx_driver[ + .resume = bcm7xxx_config_init, + .driver = { .owner = THIS_MODULE }, + }, { +- .phy_id = PHY_BCM_OUI_4, +- .phy_id_mask = 0xffff0000, +- .name = "Broadcom BCM7XXX 40nm", +- .features = PHY_GBIT_FEATURES | +- SUPPORTED_Pause | SUPPORTED_Asym_Pause, +- .flags = PHY_IS_INTERNAL, +- .config_init = bcm7xxx_config_init, +- .config_aneg = genphy_config_aneg, +- .read_status = genphy_read_status, +- .suspend = bcm7xxx_suspend, +- .resume = bcm7xxx_config_init, +- .driver = { .owner = THIS_MODULE }, +-}, { +- .phy_id = PHY_BCM_OUI_5, +- .phy_id_mask = 0xffffff00, +- .name = "Broadcom BCM7XXX 65nm", +- .features = PHY_BASIC_FEATURES | ++ .phy_id = PHY_ID_BCM7435, ++ .phy_id_mask = 0xfffffff0, ++ .name = "Broadcom BCM7435", ++ .features = PHY_BASIC_FEATURES | + SUPPORTED_Pause | SUPPORTED_Asym_Pause, +- .flags = PHY_IS_INTERNAL, +- .config_init = bcm7xxx_dummy_config_init, +- .config_aneg = genphy_config_aneg, +- .read_status = genphy_read_status, +- .suspend = bcm7xxx_suspend, +- .resume = bcm7xxx_config_init, +- .driver = { .owner = THIS_MODULE }, ++ .flags = PHY_IS_INTERNAL, ++ .config_init = bcm7xxx_config_init, ++ .config_aneg = genphy_config_aneg, ++ .read_status = genphy_read_status, ++ .suspend = bcm7xxx_suspend, ++ .resume = bcm7xxx_config_init, ++ .driver = { .owner = THIS_MODULE }, + } }; + + static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = { +@@ -395,9 +373,8 @@ static struct mdio_device_id __maybe_unu + { PHY_ID_BCM7425, 0xfffffff0, }, + { PHY_ID_BCM7429, 0xfffffff0, }, + { PHY_ID_BCM7439, 0xfffffff0, }, ++ { PHY_ID_BCM7435, 0xfffffff0, }, + { PHY_ID_BCM7445, 0xfffffff0, }, +- { PHY_BCM_OUI_4, 0xffff0000 }, +- { PHY_BCM_OUI_5, 0xffffff00 }, + { } + }; + +--- a/include/linux/brcmphy.h ++++ b/include/linux/brcmphy.h +@@ -26,6 +26,7 @@ + #define PHY_ID_BCM7366 0x600d8490 + #define PHY_ID_BCM7425 0x600d86b0 + #define PHY_ID_BCM7429 0x600d8730 ++#define PHY_ID_BCM7435 0x600d8750 + #define PHY_ID_BCM7439 0x600d8480 + #define PHY_ID_BCM7439_2 0xae025080 + #define PHY_ID_BCM7445 0x600d8510 diff --git a/target/linux/generic/patches-4.4/078-0002-net-phy-update-Broadcom-drivers-to-v4.6.patch b/target/linux/generic/patches-4.4/078-0002-net-phy-update-Broadcom-drivers-to-v4.6.patch new file mode 100644 index 0000000000..4be229b8fa --- /dev/null +++ b/target/linux/generic/patches-4.4/078-0002-net-phy-update-Broadcom-drivers-to-v4.6.patch @@ -0,0 +1,123 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Subject: [PATCH 2/4] net: phy: update Broadcom drivers to v4.6 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Signed-off-by: Rafał Miłecki +--- + +--- a/drivers/net/phy/bcm7xxx.c ++++ b/drivers/net/phy/bcm7xxx.c +@@ -24,7 +24,7 @@ + #define MII_BCM7XXX_100TX_FALSE_CAR 0x13 + #define MII_BCM7XXX_100TX_DISC 0x14 + #define MII_BCM7XXX_AUX_MODE 0x1d +-#define MII_BCM7XX_64CLK_MDIO BIT(12) ++#define MII_BCM7XXX_64CLK_MDIO BIT(12) + #define MII_BCM7XXX_TEST 0x1f + #define MII_BCM7XXX_SHD_MODE_2 BIT(2) + +@@ -247,7 +247,7 @@ static int bcm7xxx_config_init(struct ph + int ret; + + /* Enable 64 clock MDIO */ +- phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XX_64CLK_MDIO); ++ phy_write(phydev, MII_BCM7XXX_AUX_MODE, MII_BCM7XXX_64CLK_MDIO); + phy_read(phydev, MII_BCM7XXX_AUX_MODE); + + /* set shadow mode 2 */ +@@ -318,6 +318,22 @@ static int bcm7xxx_suspend(struct phy_de + .driver = { .owner = THIS_MODULE }, \ + } + ++#define BCM7XXX_40NM_EPHY(_oui, _name) \ ++{ \ ++ .phy_id = (_oui), \ ++ .phy_id_mask = 0xfffffff0, \ ++ .name = _name, \ ++ .features = PHY_BASIC_FEATURES | \ ++ SUPPORTED_Pause | SUPPORTED_Asym_Pause, \ ++ .flags = PHY_IS_INTERNAL, \ ++ .config_init = bcm7xxx_config_init, \ ++ .config_aneg = genphy_config_aneg, \ ++ .read_status = genphy_read_status, \ ++ .suspend = bcm7xxx_suspend, \ ++ .resume = bcm7xxx_config_init, \ ++ .driver = { .owner = THIS_MODULE }, \ ++} ++ + static struct phy_driver bcm7xxx_driver[] = { + BCM7XXX_28NM_GPHY(PHY_ID_BCM7250, "Broadcom BCM7250"), + BCM7XXX_28NM_GPHY(PHY_ID_BCM7364, "Broadcom BCM7364"), +@@ -325,51 +341,19 @@ static struct phy_driver bcm7xxx_driver[ + BCM7XXX_28NM_GPHY(PHY_ID_BCM7439, "Broadcom BCM7439"), + BCM7XXX_28NM_GPHY(PHY_ID_BCM7439_2, "Broadcom BCM7439 (2)"), + BCM7XXX_28NM_GPHY(PHY_ID_BCM7445, "Broadcom BCM7445"), +-{ +- .phy_id = PHY_ID_BCM7425, +- .phy_id_mask = 0xfffffff0, +- .name = "Broadcom BCM7425", +- .features = PHY_BASIC_FEATURES | +- SUPPORTED_Pause | SUPPORTED_Asym_Pause, +- .flags = PHY_IS_INTERNAL, +- .config_init = bcm7xxx_config_init, +- .config_aneg = genphy_config_aneg, +- .read_status = genphy_read_status, +- .suspend = bcm7xxx_suspend, +- .resume = bcm7xxx_config_init, +- .driver = { .owner = THIS_MODULE }, +-}, { +- .phy_id = PHY_ID_BCM7429, +- .phy_id_mask = 0xfffffff0, +- .name = "Broadcom BCM7429", +- .features = PHY_BASIC_FEATURES | +- SUPPORTED_Pause | SUPPORTED_Asym_Pause, +- .flags = PHY_IS_INTERNAL, +- .config_init = bcm7xxx_config_init, +- .config_aneg = genphy_config_aneg, +- .read_status = genphy_read_status, +- .suspend = bcm7xxx_suspend, +- .resume = bcm7xxx_config_init, +- .driver = { .owner = THIS_MODULE }, +-}, { +- .phy_id = PHY_ID_BCM7435, +- .phy_id_mask = 0xfffffff0, +- .name = "Broadcom BCM7435", +- .features = PHY_BASIC_FEATURES | +- SUPPORTED_Pause | SUPPORTED_Asym_Pause, +- .flags = PHY_IS_INTERNAL, +- .config_init = bcm7xxx_config_init, +- .config_aneg = genphy_config_aneg, +- .read_status = genphy_read_status, +- .suspend = bcm7xxx_suspend, +- .resume = bcm7xxx_config_init, +- .driver = { .owner = THIS_MODULE }, +-} }; ++ BCM7XXX_40NM_EPHY(PHY_ID_BCM7346, "Broadcom BCM7346"), ++ BCM7XXX_40NM_EPHY(PHY_ID_BCM7362, "Broadcom BCM7362"), ++ BCM7XXX_40NM_EPHY(PHY_ID_BCM7425, "Broadcom BCM7425"), ++ BCM7XXX_40NM_EPHY(PHY_ID_BCM7429, "Broadcom BCM7429"), ++ BCM7XXX_40NM_EPHY(PHY_ID_BCM7435, "Broadcom BCM7435"), ++}; + + static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = { + { PHY_ID_BCM7250, 0xfffffff0, }, + { PHY_ID_BCM7364, 0xfffffff0, }, + { PHY_ID_BCM7366, 0xfffffff0, }, ++ { PHY_ID_BCM7346, 0xfffffff0, }, ++ { PHY_ID_BCM7362, 0xfffffff0, }, + { PHY_ID_BCM7425, 0xfffffff0, }, + { PHY_ID_BCM7429, 0xfffffff0, }, + { PHY_ID_BCM7439, 0xfffffff0, }, +--- a/include/linux/brcmphy.h ++++ b/include/linux/brcmphy.h +@@ -24,6 +24,8 @@ + #define PHY_ID_BCM7250 0xae025280 + #define PHY_ID_BCM7364 0xae025260 + #define PHY_ID_BCM7366 0x600d8490 ++#define PHY_ID_BCM7346 0x600d8650 ++#define PHY_ID_BCM7362 0x600d84b0 + #define PHY_ID_BCM7425 0x600d86b0 + #define PHY_ID_BCM7429 0x600d8730 + #define PHY_ID_BCM7435 0x600d8750 diff --git a/target/linux/generic/patches-4.4/078-0003-net-phy-cherry-pick-Broadcom-drivers-updates-from-v4.patch b/target/linux/generic/patches-4.4/078-0003-net-phy-cherry-pick-Broadcom-drivers-updates-from-v4.patch new file mode 100644 index 0000000000..bf8818976f --- /dev/null +++ b/target/linux/generic/patches-4.4/078-0003-net-phy-cherry-pick-Broadcom-drivers-updates-from-v4.patch @@ -0,0 +1,316 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Subject: [PATCH 1/2] net: phy: cherry-pick Broadcom drivers updates from + v4.10-rc1 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This includes following upstream commits: +5519da874ad0 net: phy: broadcom: Move bcm54xx_auxctl_{read, write} to common library +b14995ac2527 net: phy: broadcom: Add BCM54810 PHY entry +5b4e29005123 net: phy: broadcom: add bcm54xx_auxctl_read +d92ead16be40 net: phy: broadcom: Add support for BCM54612E +3cf25904fe46 net: phy: broadcom: Update Auxiliary Control Register macros + +Other commits were skipped as they depend on other changes like +ETHTOOL_PHY_DOWNSHIFT & DOWNSHIFT_DEV_DISABLE and new APIs like +get_sset_count. + +One exception was picking new regs from commit d06f78c4232d ("net: phy: +broadcom: Add support code for downshift/Wirespeed"). + +Signed-off-by: Rafał Miłecki +--- + +--- a/drivers/net/phy/Kconfig ++++ b/drivers/net/phy/Kconfig +@@ -77,7 +77,7 @@ config BROADCOM_PHY + select BCM_NET_PHYLIB + ---help--- + Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464, +- BCM5481 and BCM5482 PHYs. ++ BCM5481, BCM54810 and BCM5482 PHYs. + + config BCM_CYGNUS_PHY + tristate "Drivers for Broadcom Cygnus SoC internal PHY" +--- a/drivers/net/phy/bcm-phy-lib.c ++++ b/drivers/net/phy/bcm-phy-lib.c +@@ -50,6 +50,23 @@ int bcm_phy_read_exp(struct phy_device * + } + EXPORT_SYMBOL_GPL(bcm_phy_read_exp); + ++int bcm54xx_auxctl_read(struct phy_device *phydev, u16 regnum) ++{ ++ /* The register must be written to both the Shadow Register Select and ++ * the Shadow Read Register Selector ++ */ ++ phy_write(phydev, MII_BCM54XX_AUX_CTL, regnum | ++ regnum << MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT); ++ return phy_read(phydev, MII_BCM54XX_AUX_CTL); ++} ++EXPORT_SYMBOL_GPL(bcm54xx_auxctl_read); ++ ++int bcm54xx_auxctl_write(struct phy_device *phydev, u16 regnum, u16 val) ++{ ++ return phy_write(phydev, MII_BCM54XX_AUX_CTL, regnum | val); ++} ++EXPORT_SYMBOL(bcm54xx_auxctl_write); ++ + int bcm_phy_write_misc(struct phy_device *phydev, + u16 reg, u16 chl, u16 val) + { +--- a/drivers/net/phy/bcm-phy-lib.h ++++ b/drivers/net/phy/bcm-phy-lib.h +@@ -19,6 +19,9 @@ + int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val); + int bcm_phy_read_exp(struct phy_device *phydev, u16 reg); + ++int bcm54xx_auxctl_write(struct phy_device *phydev, u16 regnum, u16 val); ++int bcm54xx_auxctl_read(struct phy_device *phydev, u16 regnum); ++ + int bcm_phy_write_misc(struct phy_device *phydev, + u16 reg, u16 chl, u16 value); + int bcm_phy_read_misc(struct phy_device *phydev, +--- a/drivers/net/phy/broadcom.c ++++ b/drivers/net/phy/broadcom.c +@@ -18,7 +18,7 @@ + #include + #include + #include +- ++#include + + #define BRCM_PHY_MODEL(phydev) \ + ((phydev)->drv->phy_id & (phydev)->drv->phy_id_mask) +@@ -30,9 +30,32 @@ MODULE_DESCRIPTION("Broadcom PHY driver" + MODULE_AUTHOR("Maciej W. Rozycki"); + MODULE_LICENSE("GPL"); + +-static int bcm54xx_auxctl_write(struct phy_device *phydev, u16 regnum, u16 val) ++static int bcm54810_config(struct phy_device *phydev) + { +- return phy_write(phydev, MII_BCM54XX_AUX_CTL, regnum | val); ++ int rc, val; ++ ++ val = bcm_phy_read_exp(phydev, BCM54810_EXP_BROADREACH_LRE_MISC_CTL); ++ val &= ~BCM54810_EXP_BROADREACH_LRE_MISC_CTL_EN; ++ rc = bcm_phy_write_exp(phydev, BCM54810_EXP_BROADREACH_LRE_MISC_CTL, ++ val); ++ if (rc < 0) ++ return rc; ++ ++ val = bcm54xx_auxctl_read(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC); ++ val &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN; ++ val |= MII_BCM54XX_AUXCTL_MISC_WREN; ++ rc = bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC, ++ val); ++ if (rc < 0) ++ return rc; ++ ++ val = bcm_phy_read_shadow(phydev, BCM54810_SHD_CLK_CTL); ++ val &= ~BCM54810_SHD_CLK_CTL_GTXCLK_EN; ++ rc = bcm_phy_write_shadow(phydev, BCM54810_SHD_CLK_CTL, val); ++ if (rc < 0) ++ return rc; ++ ++ return 0; + } + + /* Needs SMDSP clock enabled via bcm54xx_phydsp_config() */ +@@ -207,6 +230,12 @@ static int bcm54xx_config_init(struct ph + (phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE)) + bcm54xx_adjust_rxrefclk(phydev); + ++ if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54810) { ++ err = bcm54810_config(phydev); ++ if (err) ++ return err; ++ } ++ + bcm54xx_phydsp_config(phydev); + + return 0; +@@ -304,6 +333,7 @@ static int bcm5482_read_status(struct ph + + static int bcm5481_config_aneg(struct phy_device *phydev) + { ++ struct device_node *np = phydev->dev.of_node; + int ret; + + /* Aneg firsly. */ +@@ -334,6 +364,49 @@ static int bcm5481_config_aneg(struct ph + phy_write(phydev, 0x18, reg); + } + ++ if (of_property_read_bool(np, "enet-phy-lane-swap")) { ++ /* Lane Swap - Undocumented register...magic! */ ++ ret = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_SEL_ER + 0x9, ++ 0x11B); ++ if (ret < 0) ++ return ret; ++ } ++ ++ return ret; ++} ++ ++static int bcm54612e_config_aneg(struct phy_device *phydev) ++{ ++ int ret; ++ ++ /* First, auto-negotiate. */ ++ ret = genphy_config_aneg(phydev); ++ ++ /* Clear TX internal delay unless requested. */ ++ if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) && ++ (phydev->interface != PHY_INTERFACE_MODE_RGMII_TXID)) { ++ /* Disable TXD to GTXCLK clock delay (default set) */ ++ /* Bit 9 is the only field in shadow register 00011 */ ++ bcm_phy_write_shadow(phydev, 0x03, 0); ++ } ++ ++ /* Clear RX internal delay unless requested. */ ++ if ((phydev->interface != PHY_INTERFACE_MODE_RGMII_ID) && ++ (phydev->interface != PHY_INTERFACE_MODE_RGMII_RXID)) { ++ u16 reg; ++ ++ /* Errata: reads require filling in the write selector field */ ++ bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC, ++ MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC); ++ reg = phy_read(phydev, MII_BCM54XX_AUX_CTL); ++ /* Disable RXD to RXC delay (default set) */ ++ reg &= ~MII_BCM54XX_AUXCTL_MISC_RXD_RXC_SKEW; ++ /* Clear shadow selector field */ ++ reg &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MASK; ++ bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC, ++ MII_BCM54XX_AUXCTL_MISC_WREN | reg); ++ } ++ + return ret; + } + +@@ -488,6 +561,18 @@ static struct phy_driver broadcom_driver + .config_intr = bcm_phy_config_intr, + .driver = { .owner = THIS_MODULE }, + }, { ++ .phy_id = PHY_ID_BCM54612E, ++ .phy_id_mask = 0xfffffff0, ++ .name = "Broadcom BCM54612E", ++ .features = PHY_GBIT_FEATURES | ++ SUPPORTED_Pause | SUPPORTED_Asym_Pause, ++ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, ++ .config_init = bcm54xx_config_init, ++ .config_aneg = bcm54612e_config_aneg, ++ .read_status = genphy_read_status, ++ .ack_interrupt = bcm_phy_ack_intr, ++ .config_intr = bcm_phy_config_intr, ++}, { + .phy_id = PHY_ID_BCM54616S, + .phy_id_mask = 0xfffffff0, + .name = "Broadcom BCM54616S", +@@ -527,6 +612,18 @@ static struct phy_driver broadcom_driver + .config_intr = bcm_phy_config_intr, + .driver = { .owner = THIS_MODULE }, + }, { ++ .phy_id = PHY_ID_BCM54810, ++ .phy_id_mask = 0xfffffff0, ++ .name = "Broadcom BCM54810", ++ .features = PHY_GBIT_FEATURES | ++ SUPPORTED_Pause | SUPPORTED_Asym_Pause, ++ .flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT, ++ .config_init = bcm54xx_config_init, ++ .config_aneg = bcm5481_config_aneg, ++ .read_status = genphy_read_status, ++ .ack_interrupt = bcm_phy_ack_intr, ++ .config_intr = bcm_phy_config_intr, ++}, { + .phy_id = PHY_ID_BCM5482, + .phy_id_mask = 0xfffffff0, + .name = "Broadcom BCM5482", +@@ -612,9 +709,11 @@ static struct mdio_device_id __maybe_unu + { PHY_ID_BCM5411, 0xfffffff0 }, + { PHY_ID_BCM5421, 0xfffffff0 }, + { PHY_ID_BCM5461, 0xfffffff0 }, ++ { PHY_ID_BCM54612E, 0xfffffff0 }, + { PHY_ID_BCM54616S, 0xfffffff0 }, + { PHY_ID_BCM5464, 0xfffffff0 }, + { PHY_ID_BCM5481, 0xfffffff0 }, ++ { PHY_ID_BCM54810, 0xfffffff0 }, + { PHY_ID_BCM5482, 0xfffffff0 }, + { PHY_ID_BCM50610, 0xfffffff0 }, + { PHY_ID_BCM50610M, 0xfffffff0 }, +--- a/include/linux/brcmphy.h ++++ b/include/linux/brcmphy.h +@@ -13,11 +13,13 @@ + #define PHY_ID_BCM5241 0x0143bc30 + #define PHY_ID_BCMAC131 0x0143bc70 + #define PHY_ID_BCM5481 0x0143bca0 ++#define PHY_ID_BCM54810 0x03625d00 + #define PHY_ID_BCM5482 0x0143bcb0 + #define PHY_ID_BCM5411 0x00206070 + #define PHY_ID_BCM5421 0x002060e0 + #define PHY_ID_BCM5464 0x002060b0 + #define PHY_ID_BCM5461 0x002060c0 ++#define PHY_ID_BCM54612E 0x03625e60 + #define PHY_ID_BCM54616S 0x03625d10 + #define PHY_ID_BCM57780 0x03625d90 + +@@ -55,6 +57,7 @@ + #define PHY_BRCM_EXT_IBND_TX_ENABLE 0x00002000 + #define PHY_BRCM_CLEAR_RGMII_MODE 0x00004000 + #define PHY_BRCM_DIS_TXCRXC_NOENRGY 0x00008000 ++ + /* Broadcom BCM7xxx specific workarounds */ + #define PHY_BRCM_7XXX_REV(x) (((x) >> 8) & 0xff) + #define PHY_BRCM_7XXX_PATCH(x) ((x) & 0xff) +@@ -105,11 +108,14 @@ + #define MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA 0x0800 + + #define MII_BCM54XX_AUXCTL_MISC_WREN 0x8000 ++#define MII_BCM54XX_AUXCTL_MISC_RXD_RXC_SKEW 0x0100 + #define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX 0x0200 + #define MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC 0x7000 + #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC 0x0007 ++#define MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT 12 ++#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN (1 << 8) + +-#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x0000 ++#define MII_BCM54XX_AUXCTL_SHDWSEL_MASK 0x0007 + + /* + * Broadcom LED source encodings. These are used in BCM5461, BCM5481, +@@ -124,6 +130,7 @@ + #define BCM_LED_SRC_INTR 0x6 + #define BCM_LED_SRC_QUALITY 0x7 + #define BCM_LED_SRC_RCVLED 0x8 ++#define BCM_LED_SRC_WIRESPEED 0x9 + #define BCM_LED_SRC_MULTICOLOR1 0xa + #define BCM_LED_SRC_OPENSHORT 0xb + #define BCM_LED_SRC_OFF 0xe /* Tied high */ +@@ -135,6 +142,14 @@ + * Shadow values go into bits [14:10] of register 0x1c to select a shadow + * register to access. + */ ++ ++/* 00100: Reserved control register 2 */ ++#define BCM54XX_SHD_SCR2 0x04 ++#define BCM54XX_SHD_SCR2_WSPD_RTRY_DIS 0x100 ++#define BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_SHIFT 2 ++#define BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_OFFSET 2 ++#define BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_MASK 0x7 ++ + /* 00101: Spare Control Register 3 */ + #define BCM54XX_SHD_SCR3 0x05 + #define BCM54XX_SHD_SCR3_DEF_CLK125 0x0001 +@@ -189,6 +204,12 @@ + #define BCM5482_SSD_SGMII_SLAVE_EN 0x0002 /* Slave mode enable */ + #define BCM5482_SSD_SGMII_SLAVE_AD 0x0001 /* Slave auto-detection */ + ++/* BCM54810 Registers */ ++#define BCM54810_EXP_BROADREACH_LRE_MISC_CTL (MII_BCM54XX_EXP_SEL_ER + 0x90) ++#define BCM54810_EXP_BROADREACH_LRE_MISC_CTL_EN (1 << 0) ++#define BCM54810_SHD_CLK_CTL 0x3 ++#define BCM54810_SHD_CLK_CTL_GTXCLK_EN (1 << 9) ++ + + /*****************************************************************************/ + /* Fast Ethernet Transceiver definitions. */ diff --git a/target/linux/generic/patches-4.4/078-0004-net-phy-pick-Broadcom-drivers-updates-from-net-next-.patch b/target/linux/generic/patches-4.4/078-0004-net-phy-pick-Broadcom-drivers-updates-from-net-next-.patch new file mode 100644 index 0000000000..d0842dfa97 --- /dev/null +++ b/target/linux/generic/patches-4.4/078-0004-net-phy-pick-Broadcom-drivers-updates-from-net-next-.patch @@ -0,0 +1,136 @@ +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Subject: [PATCH 2/2] net: phy: pick Broadcom drivers updates from net-next for + 4.11 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Signed-off-by: Rafał Miłecki +--- + +--- a/drivers/net/phy/bcm7xxx.c ++++ b/drivers/net/phy/bcm7xxx.c +@@ -163,12 +163,43 @@ static int bcm7xxx_28nm_e0_plus_afe_conf + return 0; + } + ++static int bcm7xxx_28nm_a0_patch_afe_config_init(struct phy_device *phydev) ++{ ++ /* +1 RC_CAL codes for RL centering for both LT and HT conditions */ ++ bcm_phy_write_misc(phydev, AFE_RXCONFIG_2, 0xd003); ++ ++ /* Cut master bias current by 2% to compensate for RC_CAL offset */ ++ bcm_phy_write_misc(phydev, DSP_TAP10, 0x791b); ++ ++ /* Improve hybrid leakage */ ++ bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x10e3); ++ ++ /* Change rx_on_tune 8 to 0xf */ ++ bcm_phy_write_misc(phydev, 0x21, 0x2, 0x87f6); ++ ++ /* Change 100Tx EEE bandwidth */ ++ bcm_phy_write_misc(phydev, 0x22, 0x2, 0x017d); ++ ++ /* Enable ffe zero detection for Vitesse interoperability */ ++ bcm_phy_write_misc(phydev, 0x26, 0x2, 0x0015); ++ ++ r_rc_cal_reset(phydev); ++ ++ return 0; ++} ++ + static int bcm7xxx_28nm_config_init(struct phy_device *phydev) + { + u8 rev = PHY_BRCM_7XXX_REV(phydev->dev_flags); + u8 patch = PHY_BRCM_7XXX_PATCH(phydev->dev_flags); + int ret = 0; + ++ /* Newer devices have moved the revision information back into a ++ * standard location in MII_PHYS_ID[23] ++ */ ++ if (rev == 0) ++ rev = phydev->phy_id & ~phydev->drv->phy_id_mask; ++ + pr_info_once("%s: %s PHY revision: 0x%02x, patch: %d\n", + dev_name(&phydev->dev), phydev->drv->name, rev, patch); + +@@ -192,6 +223,9 @@ static int bcm7xxx_28nm_config_init(stru + case 0x10: + ret = bcm7xxx_28nm_e0_plus_afe_config_init(phydev); + break; ++ case 0x01: ++ ret = bcm7xxx_28nm_a0_patch_afe_config_init(phydev); ++ break; + default: + break; + } +@@ -336,6 +370,7 @@ static int bcm7xxx_suspend(struct phy_de + + static struct phy_driver bcm7xxx_driver[] = { + BCM7XXX_28NM_GPHY(PHY_ID_BCM7250, "Broadcom BCM7250"), ++ BCM7XXX_28NM_GPHY(PHY_ID_BCM7278, "Broadcom BCM7278"), + BCM7XXX_28NM_GPHY(PHY_ID_BCM7364, "Broadcom BCM7364"), + BCM7XXX_28NM_GPHY(PHY_ID_BCM7366, "Broadcom BCM7366"), + BCM7XXX_28NM_GPHY(PHY_ID_BCM7439, "Broadcom BCM7439"), +@@ -350,6 +385,7 @@ static struct phy_driver bcm7xxx_driver[ + + static struct mdio_device_id __maybe_unused bcm7xxx_tbl[] = { + { PHY_ID_BCM7250, 0xfffffff0, }, ++ { PHY_ID_BCM7278, 0xfffffff0, }, + { PHY_ID_BCM7364, 0xfffffff0, }, + { PHY_ID_BCM7366, 0xfffffff0, }, + { PHY_ID_BCM7346, 0xfffffff0, }, +--- a/drivers/net/phy/broadcom.c ++++ b/drivers/net/phy/broadcom.c +@@ -395,12 +395,10 @@ static int bcm54612e_config_aneg(struct + (phydev->interface != PHY_INTERFACE_MODE_RGMII_RXID)) { + u16 reg; + +- /* Errata: reads require filling in the write selector field */ +- bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC, +- MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC); +- reg = phy_read(phydev, MII_BCM54XX_AUX_CTL); ++ reg = bcm54xx_auxctl_read(phydev, ++ MII_BCM54XX_AUXCTL_SHDWSEL_MISC); + /* Disable RXD to RXC delay (default set) */ +- reg &= ~MII_BCM54XX_AUXCTL_MISC_RXD_RXC_SKEW; ++ reg &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN; + /* Clear shadow selector field */ + reg &= ~MII_BCM54XX_AUXCTL_SHDWSEL_MASK; + bcm54xx_auxctl_write(phydev, MII_BCM54XX_AUXCTL_SHDWSEL_MISC, +--- a/include/linux/brcmphy.h ++++ b/include/linux/brcmphy.h +@@ -24,6 +24,7 @@ + #define PHY_ID_BCM57780 0x03625d90 + + #define PHY_ID_BCM7250 0xae025280 ++#define PHY_ID_BCM7278 0xae0251a0 + #define PHY_ID_BCM7364 0xae025260 + #define PHY_ID_BCM7366 0x600d8490 + #define PHY_ID_BCM7346 0x600d8650 +@@ -103,18 +104,17 @@ + /* + * AUXILIARY CONTROL SHADOW ACCESS REGISTERS. (PHY REG 0x18) + */ +-#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x0000 ++#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x00 + #define MII_BCM54XX_AUXCTL_ACTL_TX_6DB 0x0400 + #define MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA 0x0800 + +-#define MII_BCM54XX_AUXCTL_MISC_WREN 0x8000 +-#define MII_BCM54XX_AUXCTL_MISC_RXD_RXC_SKEW 0x0100 +-#define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX 0x0200 +-#define MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC 0x7000 +-#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC 0x0007 +-#define MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT 12 +-#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN (1 << 8) ++#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC 0x07 ++#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN 0x0010 ++#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN 0x0100 ++#define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX 0x0200 ++#define MII_BCM54XX_AUXCTL_MISC_WREN 0x8000 + ++#define MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT 12 + #define MII_BCM54XX_AUXCTL_SHDWSEL_MASK 0x0007 + + /*