From: Simon Glass Date: Thu, 13 Nov 2014 05:42:19 +0000 (-0700) Subject: x86: ivybridge: Perform initial CPU setup X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f5fbbe95798dba8f1536892598afbf33b5c07b5f;p=project%2Fbcm63xx%2Fu-boot.git x86: ivybridge: Perform initial CPU setup Set up the flex ratio (controls speed versus heat output) and a few other very early things. Signed-off-by: Simon Glass --- diff --git a/arch/x86/cpu/ivybridge/cpu.c b/arch/x86/cpu/ivybridge/cpu.c index 5d7640b526..ab708dd776 100644 --- a/arch/x86/cpu/ivybridge/cpu.c +++ b/arch/x86/cpu/ivybridge/cpu.c @@ -14,13 +14,123 @@ #include #include #include +#include +#include +#include #include #include #include +#include #include DECLARE_GLOBAL_DATA_PTR; +static void enable_port80_on_lpc(struct pci_controller *hose, pci_dev_t dev) +{ + /* Enable port 80 POST on LPC */ + pci_hose_write_config_dword(hose, dev, PCH_RCBA_BASE, DEFAULT_RCBA | 1); + clrbits_le32(RCB_REG(GCS), 4); +} + +/* + * Enable Prefetching and Caching. + */ +static void enable_spi_prefetch(struct pci_controller *hose, pci_dev_t dev) +{ + u8 reg8; + + pci_hose_read_config_byte(hose, dev, 0xdc, ®8); + reg8 &= ~(3 << 2); + reg8 |= (2 << 2); /* Prefetching and Caching Enabled */ + pci_hose_write_config_byte(hose, dev, 0xdc, reg8); +} + +static void set_var_mtrr( + unsigned reg, unsigned base, unsigned size, unsigned type) + +{ + /* Bit Bit 32-35 of MTRRphysMask should be set to 1 */ + /* FIXME: It only support 4G less range */ + wrmsr(MTRRphysBase_MSR(reg), base | type, 0); + wrmsr(MTRRphysMask_MSR(reg), ~(size - 1) | MTRRphysMaskValid, + (1 << (CONFIG_CPU_ADDR_BITS - 32)) - 1); +} + +static void enable_rom_caching(void) +{ + disable_caches(); + set_var_mtrr(1, 0xffc00000, 4 << 20, MTRR_TYPE_WRPROT); + enable_caches(); + + /* Enable Variable MTRRs */ + wrmsr(MTRRdefType_MSR, 0x800, 0); +} + +static int set_flex_ratio_to_tdp_nominal(void) +{ + msr_t flex_ratio, msr; + u8 nominal_ratio; + + /* Minimum CPU revision for configurable TDP support */ + if (cpuid_eax(1) < IVB_CONFIG_TDP_MIN_CPUID) + return -EINVAL; + + /* Check for Flex Ratio support */ + flex_ratio = msr_read(MSR_FLEX_RATIO); + if (!(flex_ratio.lo & FLEX_RATIO_EN)) + return -EINVAL; + + /* Check for >0 configurable TDPs */ + msr = msr_read(MSR_PLATFORM_INFO); + if (((msr.hi >> 1) & 3) == 0) + return -EINVAL; + + /* Use nominal TDP ratio for flex ratio */ + msr = msr_read(MSR_CONFIG_TDP_NOMINAL); + nominal_ratio = msr.lo & 0xff; + + /* See if flex ratio is already set to nominal TDP ratio */ + if (((flex_ratio.lo >> 8) & 0xff) == nominal_ratio) + return 0; + + /* Set flex ratio to nominal TDP ratio */ + flex_ratio.lo &= ~0xff00; + flex_ratio.lo |= nominal_ratio << 8; + flex_ratio.lo |= FLEX_RATIO_LOCK; + msr_write(MSR_FLEX_RATIO, flex_ratio); + + /* Set flex ratio in soft reset data register bits 11:6 */ + clrsetbits_le32(RCB_REG(SOFT_RESET_DATA), 0x3f << 6, + (nominal_ratio & 0x3f) << 6); + + /* Set soft reset control to use register value */ + setbits_le32(RCB_REG(SOFT_RESET_CTRL), 1); + + /* Issue warm reset, will be "CPU only" due to soft reset data */ + outb(0x0, PORT_RESET); + outb(0x6, PORT_RESET); + cpu_hlt(); + + /* Not reached */ + return -EINVAL; +} + +static void set_spi_speed(void) +{ + u32 fdod; + + /* Observe SPI Descriptor Component Section 0 */ + writel(0x1000, RCB_REG(SPI_DESC_COMP0)); + + /* Extract the1 Write/Erase SPI Frequency from descriptor */ + fdod = readl(RCB_REG(SPI_FREQ_WR_ERA)); + fdod >>= 24; + fdod &= 7; + + /* Set Software Sequence frequency to match */ + clrsetbits_8(RCB_REG(SPI_FREQ_SWSEQ), 7, fdod); +} + int arch_cpu_init(void) { const void *blob = gd->fdt_blob; @@ -46,6 +156,26 @@ int arch_cpu_init(void) if (ret) return ret; + enable_spi_prefetch(hose, PCH_LPC_DEV); + + /* This is already done in start.S, but let's do it in C */ + enable_port80_on_lpc(hose, PCH_LPC_DEV); + + /* already done in car.S */ + if (false) + enable_rom_caching(); + + set_spi_speed(); + + /* + * We should do as little as possible before the serial console is + * up. Perhaps this should move to later. Our next lot of init + * happens in print_cpuinfo() when we have a console + */ + ret = set_flex_ratio_to_tdp_nominal(); + if (ret) + return ret; + return 0; } diff --git a/arch/x86/include/asm/arch-ivybridge/model_206ax.h b/arch/x86/include/asm/arch-ivybridge/model_206ax.h new file mode 100644 index 0000000000..8281d7a67b --- /dev/null +++ b/arch/x86/include/asm/arch-ivybridge/model_206ax.h @@ -0,0 +1,82 @@ +/* + * From Coreboot file of the same name + * + * Copyright (C) 2011 The ChromiumOS Authors. + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#ifndef _ASM_ARCH_MODEL_206AX_H +#define _ASM_ARCH_MODEL_206AX_H + +/* SandyBridge/IvyBridge bus clock is fixed at 100MHz */ +#define SANDYBRIDGE_BCLK 100 + +#define CPUID_VMX (1 << 5) +#define CPUID_SMX (1 << 6) +#define MSR_FEATURE_CONFIG 0x13c +#define MSR_FLEX_RATIO 0x194 +#define FLEX_RATIO_LOCK (1 << 20) +#define FLEX_RATIO_EN (1 << 16) +#define IA32_PLATFORM_DCA_CAP 0x1f8 +#define IA32_MISC_ENABLE 0x1a0 +#define MSR_TEMPERATURE_TARGET 0x1a2 +#define IA32_PERF_CTL 0x199 +#define IA32_THERM_INTERRUPT 0x19b +#define IA32_ENERGY_PERFORMANCE_BIAS 0x1b0 +#define ENERGY_POLICY_PERFORMANCE 0 +#define ENERGY_POLICY_NORMAL 6 +#define ENERGY_POLICY_POWERSAVE 15 +#define IA32_PACKAGE_THERM_INTERRUPT 0x1b2 +#define MSR_LT_LOCK_MEMORY 0x2e7 +#define IA32_MC0_STATUS 0x401 + +#define MSR_PIC_MSG_CONTROL 0x2e +#define PLATFORM_INFO_SET_TDP (1 << 29) + +#define MSR_MISC_PWR_MGMT 0x1aa +#define MISC_PWR_MGMT_EIST_HW_DIS (1 << 0) +#define MSR_TURBO_RATIO_LIMIT 0x1ad +#define MSR_POWER_CTL 0x1fc + +#define MSR_PKGC3_IRTL 0x60a +#define MSR_PKGC6_IRTL 0x60b +#define MSR_PKGC7_IRTL 0x60c +#define IRTL_VALID (1 << 15) +#define IRTL_1_NS (0 << 10) +#define IRTL_32_NS (1 << 10) +#define IRTL_1024_NS (2 << 10) +#define IRTL_32768_NS (3 << 10) +#define IRTL_1048576_NS (4 << 10) +#define IRTL_33554432_NS (5 << 10) +#define IRTL_RESPONSE_MASK (0x3ff) + +/* long duration in low dword, short duration in high dword */ +#define PKG_POWER_LIMIT_MASK 0x7fff +#define PKG_POWER_LIMIT_EN (1 << 15) +#define PKG_POWER_LIMIT_CLAMP (1 << 16) +#define PKG_POWER_LIMIT_TIME_SHIFT 17 +#define PKG_POWER_LIMIT_TIME_MASK 0x7f + +#define MSR_PP0_CURRENT_CONFIG 0x601 +#define PP0_CURRENT_LIMIT (112 << 3) /* 112 A */ +#define MSR_PP1_CURRENT_CONFIG 0x602 +#define PP1_CURRENT_LIMIT_SNB (35 << 3) /* 35 A */ +#define PP1_CURRENT_LIMIT_IVB (50 << 3) /* 50 A */ +#define MSR_PKG_POWER_SKU_UNIT 0x606 +#define MSR_PKG_POWER_SKU 0x614 + +#define IVB_CONFIG_TDP_MIN_CPUID 0x306a2 +#define MSR_CONFIG_TDP_NOMINAL 0x648 +#define MSR_CONFIG_TDP_LEVEL1 0x649 +#define MSR_CONFIG_TDP_LEVEL2 0x64a +#define MSR_CONFIG_TDP_CONTROL 0x64b +#define MSR_TURBO_ACTIVATION_RATIO 0x64c + +/* P-state configuration */ +#define PSS_MAX_ENTRIES 8 +#define PSS_RATIO_STEP 2 +#define PSS_LATENCY_TRANSITION 10 +#define PSS_LATENCY_BUSMASTER 10 + +#endif diff --git a/arch/x86/include/asm/arch-ivybridge/pch.h b/arch/x86/include/asm/arch-ivybridge/pch.h index 26ddeab729..c572f76037 100644 --- a/arch/x86/include/asm/arch-ivybridge/pch.h +++ b/arch/x86/include/asm/arch-ivybridge/pch.h @@ -35,6 +35,66 @@ #define LPC_GEN4_DEC 0x90 /* LPC IF Generic Decode Range 4 */ #define LPC_GENX_DEC(x) (0x84 + 4 * (x)) +#define DEFAULT_RCBA 0xfed1c000 + +/* Root Complex Register Block */ +#define RCB_REG(reg) (DEFAULT_RCBA + (reg)) + +#define PCH_RCBA_BASE 0xf0 + +#define VCH 0x0000 /* 32bit */ +#define VCAP1 0x0004 /* 32bit */ +#define VCAP2 0x0008 /* 32bit */ +#define PVC 0x000c /* 16bit */ +#define PVS 0x000e /* 16bit */ + +#define V0CAP 0x0010 /* 32bit */ +#define V0CTL 0x0014 /* 32bit */ +#define V0STS 0x001a /* 16bit */ + +#define V1CAP 0x001c /* 32bit */ +#define V1CTL 0x0020 /* 32bit */ +#define V1STS 0x0026 /* 16bit */ + +#define RCTCL 0x0100 /* 32bit */ +#define ESD 0x0104 /* 32bit */ +#define ULD 0x0110 /* 32bit */ +#define ULBA 0x0118 /* 64bit */ + +#define RP1D 0x0120 /* 32bit */ +#define RP1BA 0x0128 /* 64bit */ +#define RP2D 0x0130 /* 32bit */ +#define RP2BA 0x0138 /* 64bit */ +#define RP3D 0x0140 /* 32bit */ +#define RP3BA 0x0148 /* 64bit */ +#define RP4D 0x0150 /* 32bit */ +#define RP4BA 0x0158 /* 64bit */ +#define HDD 0x0160 /* 32bit */ +#define HDBA 0x0168 /* 64bit */ +#define RP5D 0x0170 /* 32bit */ +#define RP5BA 0x0178 /* 64bit */ +#define RP6D 0x0180 /* 32bit */ +#define RP6BA 0x0188 /* 64bit */ + +#define RPC 0x0400 /* 32bit */ +#define RPFN 0x0404 /* 32bit */ + +#define SPI_FREQ_SWSEQ 0x3893 +#define SPI_DESC_COMP0 0x38b0 +#define SPI_FREQ_WR_ERA 0x38b4 +#define SOFT_RESET_CTRL 0x38f4 +#define SOFT_RESET_DATA 0x38f8 + +#define RC 0x3400 /* 32bit */ +#define HPTC 0x3404 /* 32bit */ +#define GCS 0x3410 /* 32bit */ +#define BUC 0x3414 /* 32bit */ +#define PCH_DISABLE_GBE (1 << 5) +#define FD 0x3418 /* 32bit */ +#define DISPBDF 0x3424 /* 16bit */ +#define FD2 0x3428 /* 32bit */ +#define CG 0x341c /* 32bit */ + /** * lpc_early_init() - set up LPC serial ports and other early things * diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index b2854a978a..b9317cb34b 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -32,6 +32,8 @@ enum { #ifndef __ASSEMBLY__ +#define PORT_RESET 0xcf9 + static inline __attribute__((always_inline)) void cpu_hlt(void) { asm("hlt");