From: Ivo van Doorn Date: Sun, 3 Feb 2008 14:51:13 +0000 (+0100) Subject: rt2x00: Remove HWMODE_{A,B,G} X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f5507ce90be4e00a84b5bb4c7b4324455aa6ee21;p=openwrt%2Fstaging%2Fblogic.git rt2x00: Remove HWMODE_{A,B,G} rt2500usb initialized the SIFS and EIFS without using the values coming from rt2x000lib. After this is fixed HWMODE_{A,B,G} is now unused and can be removed in favour of the ieee80211_band enumeration which could still be usefull later. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 38c968ee50f1..df176cd2ef42 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -358,18 +358,9 @@ static int rt2500usb_config_preamble(struct rt2x00_dev *rt2x00dev, } static void rt2500usb_config_phymode(struct rt2x00_dev *rt2x00dev, - const int phymode, const int basic_rate_mask) { rt2500usb_register_write(rt2x00dev, TXRX_CSR11, basic_rate_mask); - - if (phymode == HWMODE_B) { - rt2500usb_register_write(rt2x00dev, MAC_CSR11, 0x000b); - rt2500usb_register_write(rt2x00dev, MAC_CSR12, 0x0040); - } else { - rt2500usb_register_write(rt2x00dev, MAC_CSR11, 0x0005); - rt2500usb_register_write(rt2x00dev, MAC_CSR12, 0x016c); - } } static void rt2500usb_config_channel(struct rt2x00_dev *rt2x00dev, @@ -507,6 +498,8 @@ static void rt2500usb_config_duration(struct rt2x00_dev *rt2x00dev, u16 reg; rt2500usb_register_write(rt2x00dev, MAC_CSR10, libconf->slot_time); + rt2500usb_register_write(rt2x00dev, MAC_CSR11, libconf->sifs); + rt2500usb_register_write(rt2x00dev, MAC_CSR12, libconf->eifs); rt2500usb_register_read(rt2x00dev, TXRX_CSR18, ®); rt2x00_set_field16(®, TXRX_CSR18_INTERVAL, @@ -519,8 +512,7 @@ static void rt2500usb_config(struct rt2x00_dev *rt2x00dev, const unsigned int flags) { if (flags & CONFIG_UPDATE_PHYMODE) - rt2500usb_config_phymode(rt2x00dev, libconf->phymode, - libconf->basic_rates); + rt2500usb_config_phymode(rt2x00dev, libconf->basic_rates); if (flags & CONFIG_UPDATE_CHANNEL) rt2500usb_config_channel(rt2x00dev, &libconf->rf, libconf->conf->power_level); diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h index 23ba0c15741f..647cd2d56ab9 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.h +++ b/drivers/net/wireless/rt2x00/rt2500usb.h @@ -135,7 +135,7 @@ * Misc MAC_CSR registers. * MAC_CSR9: Timer control. * MAC_CSR10: Slot time. - * MAC_CSR11: IFS. + * MAC_CSR11: SIFS. * MAC_CSR12: EIFS. * MAC_CSR13: Power mode0. * MAC_CSR14: Power mode1. diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 4fa762bdb734..93dbe2b286d5 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -390,10 +390,6 @@ static inline struct rt2x00_intf* vif_to_intf(struct ieee80211_vif *vif) return (struct rt2x00_intf *)vif->drv_priv; } -#define HWMODE_B 0 -#define HWMODE_G 1 -#define HWMODE_A 2 - /* * Details about the supported modes, rates and channels * of a particular chipset. This is used by rt2x00lib @@ -433,7 +429,7 @@ struct rt2x00lib_conf { struct antenna_setup ant; - int phymode; + enum ieee80211_band band; int basic_rates; int slot_time; diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index a4d7917f2df5..69959124d25d 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -229,23 +229,10 @@ config: memset(&libconf, 0, sizeof(libconf)); if (flags & CONFIG_UPDATE_PHYMODE) { - switch (conf->channel->band) { - case IEEE80211_BAND_5GHZ: - libconf.phymode = HWMODE_A; - break; - case IEEE80211_BAND_2GHZ: - /* Uh oh. what about B? */ - libconf.phymode = HWMODE_G; - break; - default: - ERROR(rt2x00dev, - "Attempt to configure unsupported mode (%d)" - "Defaulting to 802.11b", conf->channel->band); - libconf.phymode = HWMODE_B; - } - band = &rt2x00dev->bands[conf->channel->band]; rate = &band->bitrates[band->n_bitrates - 1]; + + libconf.band = conf->channel->band; libconf.basic_rates = rt2x00_get_rate(rate->hw_value)->ratemask; } diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index f0ba481c51e6..72c4f13a5336 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -896,7 +896,7 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev, * Rates: CCK. * Channels: 2.4 GHz */ - if (spec->num_modes > HWMODE_B) { + if (spec->num_modes > 0) { sbands[IEEE80211_BAND_2GHZ].n_channels = 14; sbands[IEEE80211_BAND_2GHZ].n_bitrates = 4; sbands[IEEE80211_BAND_2GHZ].channels = channels; @@ -909,7 +909,7 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev, * Rates: CCK, OFDM. * Channels: 2.4 GHz */ - if (spec->num_modes > HWMODE_G) { + if (spec->num_modes > 1) { sbands[IEEE80211_BAND_2GHZ].n_channels = 14; sbands[IEEE80211_BAND_2GHZ].n_bitrates = spec->num_rates; sbands[IEEE80211_BAND_2GHZ].channels = channels; @@ -922,7 +922,7 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev, * Rates: OFDM. * Channels: OFDM, UNII, HiperLAN2. */ - if (spec->num_modes > HWMODE_A) { + if (spec->num_modes > 2) { sbands[IEEE80211_BAND_5GHZ].n_channels = spec->num_channels - 14; sbands[IEEE80211_BAND_5GHZ].n_bitrates = spec->num_rates - 4; sbands[IEEE80211_BAND_5GHZ].channels = &channels[14];