From: Sven Wegener Date: Sat, 1 May 2021 11:51:51 +0000 (+0200) Subject: ramips: add support for Ubiquiti UniFi FlexHD X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f54d4ea0bb41fb7285b35bde9984ce07679b4954;p=openwrt%2Fstaging%2Fblocktrron.git ramips: add support for Ubiquiti UniFi FlexHD Hardware -------- - SoC: MediaTek MT7621AT with 128 MiB RAM and 32 MiB Flash - Wi-Fi: MediaTek MT7603 (b/g/n, 2x2) and MediaTek MT7615 (ac, 4x4) - Bluetooth: CSR8811 (internal USB, install kmod-bluetooth) Installation ------------ 1. Connect to the booted device at 192.168.1.20 using username/password "ubnt". 2. Update the bootloader environment. $ fw_setenv devmode TRUE $ fw_setenv boot_openwrt "fdt addr \$(fdtcontroladdr); fdt rm /signature; bootubnt" $ fw_setenv bootcmd "run boot_openwrt" 3. Transfer the OpenWrt sysupgrade image to the device using SCP. 4. Check the mtd partition number for bs / kernel0 / kernel1 $ cat /proc/mtd 5. Set the bootselect flag to boot from kernel0 $ dd if=/dev/zero bs=1 count=1 of=/dev/mtdblock4 6. Write the OpenWrt sysupgrade image to both kernel0 as well as kernel1 $ dd if=openwrt.bin of=/dev/mtdblock6 $ dd if=openwrt.bin of=/dev/mtdblock7 7. Reboot the device. It should boot into OpenWrt. Signed-off-by: Sven Wegener (cherry picked from commit 820f0c07c544652c1c53a45262a481ac5dbe139b) --- diff --git a/target/linux/ramips/dts/mt7621_ubnt_unifi-flexhd.dts b/target/linux/ramips/dts/mt7621_ubnt_unifi-flexhd.dts new file mode 100644 index 0000000000..615bdf4e13 --- /dev/null +++ b/target/linux/ramips/dts/mt7621_ubnt_unifi-flexhd.dts @@ -0,0 +1,181 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621.dtsi" + +#include +#include + +/ { + compatible = "ubnt,unifi-flexhd", "mediatek,mt7621-soc"; + model = "Ubiquiti UniFi FlexHD"; + + aliases { + label-mac-device = &gmac0; + led-boot = &led_blue; + led-failsafe = &led_blue; + led-running = &led_blue; + led-upgrade = &led_blue; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x60000>; + read-only; + }; + + partition@60000 { + label = "u-boot-env"; + reg = <0x60000 0x10000>; + read-only; + }; + + factory: partition@70000 { + label = "factory"; + reg = <0x70000 0x10000>; + read-only; + }; + + eeprom: partition@80000 { + label = "eeprom"; + reg = <0x80000 0x10000>; + read-only; + }; + + partition@90000 { + label = "bs"; + reg = <0x90000 0x10000>; + }; + + partition@a0000 { + label = "cfg"; + reg = <0xa0000 0x100000>; + read-only; + }; + + partition@1a0000 { + compatible = "denx,fit"; + label = "firmware"; + reg = <0x1a0000 0xf30000>; + }; + + partition@10d0000 { + label = "kernel1"; + reg = <0x10d0000 0xf30000>; + read-only; + }; + }; + }; +}; + +&eeprom { + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_eeprom_0: macaddr@0 { + reg = <0x0 0x6>; + }; +}; + +&gmac0 { + nvmem-cells = <&macaddr_eeprom_0>; + nvmem-cell-names = "mac-address"; +}; + +&switch0 { + ports { + port@0 { + status = "okay"; + label = "lan"; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + reg = <0x0 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x0>; + // On newer devices there is a MediaTek MAC in the above + // device EEPROM, so override it with a calculated one. + nvmem-cells = <&macaddr_eeprom_0>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <1>; + }; +}; + +&pcie1 { + wifi@0,0 { + reg = <0x0 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + // On newer devices there is a MediaTek MAC in the above + // device EEPROM, so override it with a calculated one. + nvmem-cells = <&macaddr_eeprom_0>; + nvmem-cell-names = "mac-address"; + mac-address-increment = <2>; + }; +}; + +&i2c { + status = "okay"; + clock-frequency = <400000>; + + led-controller@30 { + compatible = "ubnt,ledbar"; + reg = <0x30>; + + enable-gpio = <&gpio 44 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio 41 GPIO_ACTIVE_LOW>; + led-count = <8>; + + red { + label = "red"; + }; + + green { + label = "green"; + }; + + led_blue: blue { + label = "blue"; + }; + }; +}; + +&state_default { + gpio { + groups = "uart2"; + function = "gpio"; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 7f903485aa..8860be11b8 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -1785,6 +1785,17 @@ define Device/ubnt_unifi-6-lite endef TARGET_DEVICES += ubnt_unifi-6-lite +define Device/ubnt_unifi-flexhd + $(Device/dsa-migration) + DEVICE_VENDOR := Ubiquiti + DEVICE_MODEL := UniFi FlexHD + DEVICE_DTS_CONFIG := config@2 + KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb + DEVICE_PACKAGES += kmod-mt7603 kmod-mt7615e kmod-mt7615-firmware + IMAGE_SIZE := 15552k +endef +TARGET_DEVICES += ubnt_unifi-flexhd + define Device/ubnt_unifi-nanohd $(Device/dsa-migration) DEVICE_VENDOR := Ubiquiti diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index 2a08aded34..ad560a4ec0 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -20,6 +20,7 @@ ramips_setup_interfaces() tplink,re650-v1|\ tplink,re650-v2|\ ubnt,unifi-6-lite|\ + ubnt,unifi-flexhd|\ ubnt,unifi-nanohd) ucidef_set_interface_lan "lan" ;; diff --git a/target/linux/ramips/mt7621/config-5.10 b/target/linux/ramips/mt7621/config-5.10 index ec6822fa6d..dd23f13bc6 100644 --- a/target/linux/ramips/mt7621/config-5.10 +++ b/target/linux/ramips/mt7621/config-5.10 @@ -111,6 +111,7 @@ CONFIG_IRQ_MIPS_CPU=y CONFIG_IRQ_WORK=y # CONFIG_KERNEL_ZSTD is not set CONFIG_LED_TRIGGER_PHY=y +CONFIG_LEDS_UBNT_LEDBAR=y CONFIG_LIBFDT=y CONFIG_LOCK_DEBUGGING_SUPPORT=y CONFIG_LZO_COMPRESS=y