From: Alan Date: Mon, 27 Nov 2006 16:14:36 +0000 (+0000) Subject: [PATCH] pata_it821x: Suspend/Resume support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f535d53f3f8bc8243ad2167d7127f6efba9b46cb;p=openwrt%2Fstaging%2Fblogic.git [PATCH] pata_it821x: Suspend/Resume support If you are using the noraid option then after a suspend/resume sequence we need to reset the card back out of raid mode again. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index 7f68f14be6fd..d57ac741cc08 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -80,7 +80,7 @@ #define DRV_NAME "pata_it821x" -#define DRV_VERSION "0.3.2" +#define DRV_VERSION "0.3.3" struct it821x_dev { @@ -677,6 +677,8 @@ static struct scsi_host_template it821x_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, + .resume = ata_scsi_device_resume, + .suspend = ata_scsi_device_suspend, }; static struct ata_port_operations it821x_smart_port_ops = { @@ -809,6 +811,14 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) return ata_pci_init_one(pdev, port_info, 2); } +static int it821x_reinit_one(struct pci_dev *pdev) +{ + /* Resume - turn raid back off if need be */ + if (it8212_noraid) + it821x_disable_raid(pdev); + return ata_pci_device_resume(pdev); +} + static const struct pci_device_id it821x[] = { { PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8211), }, { PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8212), }, @@ -820,7 +830,9 @@ static struct pci_driver it821x_pci_driver = { .name = DRV_NAME, .id_table = it821x, .probe = it821x_init_one, - .remove = ata_pci_remove_one + .remove = ata_pci_remove_one, + .suspend = ata_pci_device_suspend, + .resume = it821x_reinit_one, }; static int __init it821x_init(void)