From: Felix Fietkau Date: Fri, 25 Aug 2006 13:19:54 +0000 (+0000) Subject: initial attempt at cleaning up the bcm63xx stuff X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f4f917d704512f76e2d00aa875868ce4ad63ff25;p=openwrt%2Fstaging%2Fneocturne.git initial attempt at cleaning up the bcm63xx stuff SVN-Revision: 4664 --- diff --git a/openwrt/target/linux/brcm63xx-2.6/config b/openwrt/target/linux/brcm63xx-2.6/config index f7c7c0b0df..50c4cfc3b6 100644 --- a/openwrt/target/linux/brcm63xx-2.6/config +++ b/openwrt/target/linux/brcm63xx-2.6/config @@ -1260,8 +1260,8 @@ CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_KGDB is not set -CONFIG_RUNTIME_DEBUG=y -CONFIG_MIPS_UNCACHED=y +# CONFIG_RUNTIME_DEBUG is not set +# CONFIG_MIPS_UNCACHED is not set # # Security options diff --git a/openwrt/target/linux/brcm63xx-2.6/patches/000-arch_mips.patch b/openwrt/target/linux/brcm63xx-2.6/patches/000-arch_mips.patch deleted file mode 100644 index 0659326fa3..0000000000 --- a/openwrt/target/linux/brcm63xx-2.6/patches/000-arch_mips.patch +++ /dev/null @@ -1,131 +0,0 @@ ---- linux-2.6.17/arch/mips/Kconfig 2006-06-18 03:49:35.000000000 +0200 -+++ linux-2.6.17-brcm63xx/arch/mips/Kconfig 2006-07-13 19:08:11.000000000 +0200 -@@ -12,6 +12,15 @@ - prompt "System type" - default SGI_IP22 - -+config MIPS_BRCM -+ bool "Support for the Broadcom boards" -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_HAS_CPU_MIPS32_R1 -+ select IRQ_CPU -+ help -+ This is a fmaily of boards based on the Broadcom MIPS32 -+ - config MIPS_MTX1 - bool "4G Systems MTX-1 board" - select DMA_NONCOHERENT -@@ -780,6 +789,7 @@ - - endchoice - -+source "arch/mips/brcm-boards/bcm963xx/Kconfig" - source "arch/mips/ddb5xxx/Kconfig" - source "arch/mips/gt64120/ev64120/Kconfig" - source "arch/mips/jazz/Kconfig" ---- linux-2.6.17/arch/mips/Makefile 2006-06-18 03:49:35.000000000 +0200 -+++ linux-2.6.17-brcm63xx/arch/mips/Makefile 2006-07-13 18:55:59.000000000 +0200 -@@ -145,6 +145,20 @@ - # - - # -+# Broadcom board -+# -+core-$(CONFIG_MIPS_BRCM) += arch/mips/brcm-boards/generic/ arch/mips/brcm-boards/bcm963xx/ -+core-$(CONFIG_MIPS_BRCM) += bcmdrivers/opensource/char/serial/impl1/ -+#core-$(CONFIG_MIPS_BRCM) += bcmdrivers/opensource/char/board/bcm963xx/impl1/ -+#core-$(CONFIG_MIPS_BRCM) += boardparms/bcm963xx/ -+cflags-$(CONFIG_MIPS_BRCM) += -Iinclude/asm-mips/mach-bcm963xx -+cflags-$(CONFIG_MIPS_BRCM) += -Iarch/mips/brcm-boards/generic/include -+cflags-$(CONFIG_MIPS_BRCM) += -Ibcmdrivers/opensource/include/bcm963xx -+cflags-$(CONFIG_MIPS_BRCM) += -Iboardparms/bcm963xx -+load-$(CONFIG_MIPS_BRCM) += 0xffffffff80010000 -+ -+ -+# - # Acer PICA 61, Mips Magnum 4000 and Olivetti M700. - # - core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/ -diff -urN linux-2.6.17/arch/mips/kernel/cpu-probe.c linux-2.6.17-brcm63xx/arch/mips/kernel/cpu-probe.c ---- linux-2.6.17/arch/mips/kernel/cpu-probe.c 2006-06-18 03:49:35.000000000 +0200 -+++ linux-2.6.17-brcm63xx/arch/mips/kernel/cpu-probe.c 2006-07-13 18:59:04.000000000 +0200 -@@ -568,6 +568,25 @@ - return; - } - -+static inline void cpu_probe_broadcom(struct cpuinfo_mips *c) -+{ -+ decode_configs(c); -+ switch (c->processor_id & 0xff00) { -+ case PRID_IMP_BCM6338: -+ c->cputype = CPU_BCM6338; -+ break; -+ case PRID_IMP_BCM6345: -+ c->cputype = CPU_BCM6345; -+ break; -+ case PRID_IMP_BCM6348: -+ c->cputype = CPU_BCM6348; -+ break; -+ default: -+ c->cputype = CPU_UNKNOWN; -+ break; -+ } -+} -+ - static inline void cpu_probe_mips(struct cpuinfo_mips *c) - { - decode_configs(c); -@@ -704,6 +723,9 @@ - case PRID_COMP_LEGACY: - cpu_probe_legacy(c); - break; -+ case PRID_COMP_BROADCOM: -+ cpu_probe_broadcom(c); -+ break; - case PRID_COMP_MIPS: - cpu_probe_mips(c); - break; -diff -urN linux-2.6.17/arch/mips/kernel/proc.c linux-2.6.17-brcm63xx/arch/mips/kernel/proc.c ---- linux-2.6.17/arch/mips/kernel/proc.c 2006-06-18 03:49:35.000000000 +0200 -+++ linux-2.6.17-brcm63xx/arch/mips/kernel/proc.c 2006-07-13 19:00:53.000000000 +0200 -@@ -85,6 +85,9 @@ - [CPU_VR4181A] = "NEC VR4181A", - [CPU_SR71000] = "Sandcraft SR71000", - [CPU_PR4450] = "Philips PR4450", -+ [CPU_BCM6338] = "BCM6338", -+ [CPU_BCM6345] = "BCM6345", -+ [CPU_BCM6348] = "BCM6348", - }; - - -diff -urN linux-2.6.17/arch/mips/mm/c-r4k.c linux-2.6.17-brcm63xx/arch/mips/mm/c-r4k.c ---- linux-2.6.17/arch/mips/mm/c-r4k.c 2006-06-18 03:49:35.000000000 +0200 -+++ linux-2.6.17-brcm63xx/arch/mips/mm/c-r4k.c 2006-07-13 19:03:23.000000000 +0200 -@@ -914,6 +914,13 @@ - if (!(config & MIPS_CONF_M)) - panic("Don't know how to probe P-caches on this cpu."); - -+ if (c->cputype == CPU_BCM6338 || c->cputype == CPU_BCM6345 || c->cputype == CPU_BCM6348) -+ { -+ printk("brcm mips: enabling icache and dcache...\n"); -+ /* Enable caches */ -+ write_c0_diag(read_c0_diag() | 0xC0000000); -+ } -+ - /* - * So we seem to be a MIPS32 or MIPS64 CPU - * So let's probe the I-cache ... -diff -urN linux-2.6.17/arch/mips/mm/tlbex.c linux-2.6.17-brcm63xx/arch/mips/mm/tlbex.c ---- linux-2.6.17/arch/mips/mm/tlbex.c 2006-06-18 03:49:35.000000000 +0200 -+++ linux-2.6.17-brcm63xx/arch/mips/mm/tlbex.c 2006-07-13 19:03:57.000000000 +0200 -@@ -882,6 +882,9 @@ - case CPU_4KSC: - case CPU_20KC: - case CPU_25KF: -+ case CPU_BCM6338: -+ case CPU_BCM6345: -+ case CPU_BCM6348: - tlbw(p); - break; - diff --git a/openwrt/target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch b/openwrt/target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch new file mode 100644 index 0000000000..abf9a7b74a --- /dev/null +++ b/openwrt/target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch @@ -0,0 +1,12834 @@ +diff -urN linux.old/arch/mips/bcm963xx/bcm63xx_led.c linux.dev/arch/mips/bcm963xx/bcm63xx_led.c +--- linux.old/arch/mips/bcm963xx/bcm63xx_led.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/bcm63xx_led.c 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,582 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++/*************************************************************************** ++ * File Name : bcm63xx_led.c ++ * ++ * Description: ++ * ++ * This file contains bcm963xx board led control API functions. ++ * ++ * To use it, do the following ++ * ++ * 1). define in the board.c the following led mappping (this is for 6345GW board): ++ * const LED_MAP_PAIR cLedMapping45GW[] = ++ * { // led name Initial state physical pin (ledMask) ++ * {kLedUsb, kLedStateOff, GPIO_LED_PIN_7}, ++ * {kLedAdsl, kLedStateOff, GPIO_LED_PIN_8}, ++ * {kLedPPP, kLedStateOff, GPIO_LED_PIN_9}, // PPP and WanData share PIN_9 ++ * {kLedWanData, kLedStateOff, GPIO_LED_PIN_9}, ++ * {kLedWireless, kLedStateOff, GPIO_LED_PIN_10}, ++ * {kLedEnd, kLedStateOff, 0 } // NOTE: kLedEnd has to be at the end. ++ * ++ * 2). };To initialize led API and initial state of the leds, call the following function with the mapping ++ * pointer from the above struct ++ * ++ * boardLedInit((PLED_MAP_PAIR) &cLedMapping45R); ++ * ++ * 3). Sample call for kernel mode: ++ * ++ * kerSysLedCtrl(kLedAdsl, kLedStateBlinkOnce); // kLedxxx defines in board.h ++ * ++ * 4). Sample call for user mode ++ * ++ * sysLedCtrl(kLedAdsl, kLedStateBlinkOnce); // kLedxxx defines in board_api.h ++ * ++ * ++ * Created on : 10/28/2002 seanl ++ * ++ ***************************************************************************/ ++ ++/* Includes. */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#define k100ms (HZ / 10) // ~100 ms ++#define kFastBlinkCount 0 // ~100ms ++#define kSlowBlinkCount 5 // ~600ms ++ ++#define MAX_VIRT_LEDS 12 ++ ++// uncomment // for debug led ++//#define DEBUG_LED ++ ++// global variables: ++struct timer_list gLedTimer; ++int gTimerOn = FALSE; ++int gLedCount = 0; ++ ++typedef struct ledinfo ++{ ++ unsigned short ledMask; // mask for led: ie. giop 10 = 0x0400 ++ unsigned short ledActiveLow; // GPIO bit reset to turn on LED ++ unsigned short ledMaskFail; // mask for led: ie. giop 10 = 0x0400 ++ unsigned short ledActiveLowFail;// GPIO bit reset to turn on LED ++ BOARD_LED_STATE ledState; // current led state ++ BOARD_LED_STATE savedLedState; // used in blink once for restore to the orignal ledState ++ int blinkCountDown; // if == 0, do blink (toggle). Is assgined value and dec by 1 at each timer. ++} LED_INFO, *PLED_INFO; ++ ++static PLED_INFO gLed = NULL; ++static PLED_INFO gpVirtLeds[MAX_VIRT_LEDS]; ++static HANDLE_LED_FUNC gLedHwFunc[MAX_VIRT_LEDS]; ++static HANDLE_LED_FUNC gLedHwFailFunc[MAX_VIRT_LEDS]; ++ ++#if 0 /* BROKEN */ ++#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338) ++static int gLedOffInBridgeMode = 1; ++#elif defined(CONFIG_BCM96345) ++static int gLedOffInBridgeMode = 0; ++#endif ++#endif ++ ++void ledTimerExpire(void); ++int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed ); ++ ++//************************************************************************************** ++// LED operations ++//************************************************************************************** ++ ++// turn led on and set the ledState ++void ledOn(PLED_INFO pLed) ++{ ++ if( pLed->ledMask ) ++ { ++ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one ++ if( pLed->ledActiveLow ) ++ GPIO->GPIOio &= ~pLed->ledMask; // turn on the led ++ else ++ GPIO->GPIOio |= pLed->ledMask; // turn on the led ++ pLed->ledState = pLed->savedLedState = kLedStateOn; ++ } ++} ++ ++ ++// turn led off and set the ledState ++void ledOff(PLED_INFO pLed) ++{ ++ if( pLed->ledMask ) ++ { ++ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one ++ if( pLed->ledActiveLow ) ++ GPIO->GPIOio |= pLed->ledMask; // turn off the led ++ else ++ GPIO->GPIOio &= ~pLed->ledMask; // turn off the led ++ pLed->ledState = pLed->savedLedState = kLedStateOff; ++ } ++} ++ ++// turn led on and set the ledState ++void ledOnFail(PLED_INFO pLed) ++{ ++ if( pLed->ledMaskFail ) ++ { ++ GPIO->GPIODir |= pLed->ledMaskFail; // turn on the direction bit in case was turned off by some one ++ if( pLed->ledActiveLowFail ) ++ GPIO->GPIOio &= ~pLed->ledMaskFail;// turn on the led ++ else ++ GPIO->GPIOio |= pLed->ledMaskFail; // turn on the led ++ pLed->ledState = pLed->savedLedState = kLedStateFail; ++ } ++} ++ ++ ++// turn led off and set the ledState ++void ledOffFail(PLED_INFO pLed) ++{ ++ if( pLed->ledMaskFail ) ++ { ++ GPIO->GPIODir |= pLed->ledMaskFail; // turn on the direction bit in case was turned off by some one ++ if( pLed->ledActiveLowFail ) ++ GPIO->GPIOio |= pLed->ledMaskFail; // turn off the led ++ else ++ GPIO->GPIOio &= ~pLed->ledMaskFail;// turn off the led ++ pLed->ledState = pLed->savedLedState = kLedStateOff; ++ } ++} ++ ++ ++// toggle the led and return the current ledState ++BOARD_LED_STATE ledToggle(PLED_INFO pLed) ++{ ++ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one ++ if (GPIO->GPIOio & pLed->ledMask) ++ { ++ GPIO->GPIOio &= ~(pLed->ledMask); ++ return( (pLed->ledActiveLow) ? kLedStateOn : kLedStateOff ); ++ } ++ else ++ { ++ GPIO->GPIOio |= pLed->ledMask; ++ return( (pLed->ledActiveLow) ? kLedStateOff : kLedStateOn ); ++ } ++} ++ ++ ++// led timer. Will return if timer is already on ++void ledTimerStart(void) ++{ ++ if (gTimerOn) ++ return; ++ ++#if defined(DEBUG_LED) ++ printk("led: add_timer\n"); ++#endif ++ ++ init_timer(&gLedTimer); ++ gLedTimer.function = (void*)ledTimerExpire; ++ gLedTimer.expires = jiffies + k100ms; // timer expires in ~100ms ++ add_timer (&gLedTimer); ++ gTimerOn = TRUE; ++} ++ ++ ++// led timer expire kicks in about ~100ms and perform the led operation according to the ledState and ++// restart the timer according to ledState ++void ledTimerExpire(void) ++{ ++ int i; ++ PLED_INFO pCurLed; ++ ++ gTimerOn = FALSE; ++ ++ for (i = 0, pCurLed = gLed; i < gLedCount; i++, pCurLed++) ++ { ++#if defined(DEBUG_LED) ++ printk("led[%d]: Mask=0x%04x, State = %d, blcd=%d\n", i, pCurLed->ledMask, pCurLed->ledState, pCurLed->blinkCountDown); ++#endif ++ switch (pCurLed->ledState) ++ { ++ case kLedStateOn: ++ case kLedStateOff: ++ case kLedStateFail: ++ pCurLed->blinkCountDown = 0; // reset the blink count down ++ break; ++ ++ case kLedStateBlinkOnce: ++ ledToggle(pCurLed); ++ pCurLed->blinkCountDown = 0; // reset to 0 ++ pCurLed->ledState = pCurLed->savedLedState; ++ if (pCurLed->ledState == kLedStateSlowBlinkContinues || ++ pCurLed->ledState == kLedStateFastBlinkContinues) ++ ledTimerStart(); // start timer if in blinkContinues stats ++ break; ++ ++ case kLedStateSlowBlinkContinues: ++ if (pCurLed->blinkCountDown-- == 0) ++ { ++ pCurLed->blinkCountDown = kSlowBlinkCount; ++ ledToggle(pCurLed); ++ } ++ ledTimerStart(); ++ break; ++ ++ case kLedStateFastBlinkContinues: ++ if (pCurLed->blinkCountDown-- == 0) ++ { ++ pCurLed->blinkCountDown = kFastBlinkCount; ++ ledToggle(pCurLed); ++ } ++ ledTimerStart(); ++ break; ++ ++ default: ++ printk("Invalid state = %d\n", pCurLed->ledState); ++ } ++ } ++} ++ ++// initialize the gLedCount and allocate and fill gLed struct ++void __init boardLedInit(PLED_MAP_PAIR cLedMapping) ++{ ++ PLED_MAP_PAIR p1, p2; ++ PLED_INFO pCurLed; ++ int needTimer = FALSE; ++ int alreadyUsed = 0; ++ ++#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338) ++ /* Set blink rate for BCM6348/BCM6338 hardware LEDs. */ ++ GPIO->LEDCtrl &= ~LED_INTERVAL_SET_MASK; ++ GPIO->LEDCtrl |= LED_INTERVAL_SET_80MS; ++#endif ++ ++ memset( gpVirtLeds, 0x00, sizeof(gpVirtLeds) ); ++ memset( gLedHwFunc, 0x00, sizeof(gLedHwFunc) ); ++ memset( gLedHwFailFunc, 0x00, sizeof(gLedHwFailFunc) ); ++ ++ gLedCount = 0; ++ ++ // Check for multiple LED names and multiple LED GPIO pins that share the ++ // same physical board LED. ++ for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ ) ++ { ++ alreadyUsed = 0; ++ for( p2 = cLedMapping; p2 != p1; p2++ ) ++ { ++ if( (p1->ledMask && p1->ledMask == p2->ledMask) || ++ (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) ) ++ { ++ alreadyUsed = 1; ++ break; ++ } ++ } ++ ++ if( alreadyUsed == 0 ) ++ gLedCount++; ++ } ++ ++ gLed = (PLED_INFO) kmalloc((gLedCount * sizeof(LED_INFO)), GFP_KERNEL); ++ if( gLed == NULL ) ++ { ++ printk( "LED memory allocation error.\n" ); ++ return; ++ } ++ ++ memset( gLed, 0x00, gLedCount * sizeof(LED_INFO) ); ++ ++ // initial the gLed with unique ledMask and initial state. If more than 1 ledNames share the physical led ++ // (ledMask) the first defined led's ledInitState will be used. ++ pCurLed = gLed; ++ for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ ) ++ { ++ if( (int) p1->ledName > MAX_VIRT_LEDS ) ++ continue; ++ ++ alreadyUsed = 0; ++ for( p2 = cLedMapping; p2 != p1; p2++ ) ++ { ++ if( (p1->ledMask && p1->ledMask == p2->ledMask) || ++ (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) ) ++ { ++ alreadyUsed = 1; ++ break; ++ } ++ } ++ ++ if( alreadyUsed == 0 ) ++ { ++ // Initialize the board LED for the first time. ++ needTimer = initLedInfo( p1, pCurLed ); ++ gpVirtLeds[(int) p1->ledName] = pCurLed; ++ pCurLed++; ++ } ++ else ++ { ++ PLED_INFO pLed; ++ for( pLed = gLed; pLed != pCurLed; pLed++ ) ++ { ++ // Find the LED_INFO structure that has already been initialized. ++ if((pLed->ledMask && pLed->ledMask == p1->ledMask) || ++ (pLed->ledMaskFail && pLed->ledMaskFail==p1->ledMaskFail)) ++ { ++ // The board LED has already been initialized but possibly ++ // not completely initialized. ++ if( p1->ledMask ) ++ { ++ pLed->ledMask = p1->ledMask; ++ pLed->ledActiveLow = p1->ledActiveLow; ++ } ++ if( p1->ledMaskFail ) ++ { ++ pLed->ledMaskFail = p1->ledMaskFail; ++ pLed->ledActiveLowFail = p1->ledActiveLowFail; ++ } ++ gpVirtLeds[(int) p1->ledName] = pLed; ++ break; ++ } ++ } ++ } ++ } ++ ++ if (needTimer) ++ ledTimerStart(); ++ ++#if defined(DEBUG_LED) ++ int i; ++ for (i=0; i < gLedCount; i++) ++ printk("initLed: led[%d]: mask=0x%04x, state=%d\n", i,(gLed+i)->ledMask, (gLed+i)->ledState); ++#endif ++ ++} ++ ++// Initialize a structure that contains information about a physical board LED ++// control. The board LED may contain more than one GPIO pin to control a ++// normal condition (green) or a failure condition (red). ++int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed ) ++{ ++ int needTimer = FALSE; ++ pCurLed->ledState = pCurLed->savedLedState = pCurMap->ledInitState; ++ pCurLed->ledMask = pCurMap->ledMask; ++ pCurLed->ledActiveLow = pCurMap->ledActiveLow; ++ pCurLed->ledMaskFail = pCurMap->ledMaskFail; ++ pCurLed->ledActiveLowFail = pCurMap->ledActiveLowFail; ++ ++ switch (pCurLed->ledState) ++ { ++ case kLedStateOn: ++ pCurLed->blinkCountDown = 0; // reset the blink count down ++ ledOn(pCurLed); ++ break; ++ case kLedStateOff: ++ pCurLed->blinkCountDown = 0; // reset the blink count down ++ ledOff(pCurLed); ++ break; ++ case kLedStateFail: ++ pCurLed->blinkCountDown = 0; // reset the blink count down ++ ledOnFail(pCurLed); ++ break; ++ case kLedStateBlinkOnce: ++ pCurLed->blinkCountDown = 1; ++ needTimer = TRUE; ++ break; ++ case kLedStateSlowBlinkContinues: ++ pCurLed->blinkCountDown = kSlowBlinkCount; ++ needTimer = TRUE; ++ break; ++ case kLedStateFastBlinkContinues: ++ pCurLed->blinkCountDown = kFastBlinkCount; ++ needTimer = TRUE; ++ break; ++ default: ++ printk("Invalid state = %d\n", pCurLed->ledState); ++ } ++ ++ return( needTimer ); ++} ++ ++#if 0 /* BROKEN */ ++// Determines if there is at least one interface in bridge mode. Bridge mode ++// is determined by the cfm convention of naming bridge interfaces nas17 ++// through nas24. ++static int isBridgedProtocol(void) ++{ ++ extern int dev_get(const char *name); ++ const int firstBridgeId = 17; ++ const int lastBridgeId = 24; ++ int i; ++ int ret = FALSE; ++ char name[16]; ++ ++ for( i = firstBridgeId; i <= lastBridgeId; i++ ) ++ { ++ sprintf( name, "nas%d", i ); ++ ++ if( dev_get(name) ) ++ { ++ ret = TRUE; ++ break; ++ } ++ } ++ ++ return(ret); ++} ++#endif ++ ++// led ctrl. Maps the ledName to the corresponding ledInfoPtr and perform the led operation ++void boardLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState) ++{ ++ PLED_INFO ledInfoPtr; ++ ++ // do the mapping from virtual to physical led ++ if( (int) ledName < MAX_VIRT_LEDS ) ++ ledInfoPtr = gpVirtLeds[(int) ledName]; ++ else ++ ledInfoPtr = NULL; ++ ++ if (ledInfoPtr == NULL) ++ return; ++ ++ if( ledState != kLedStateFail && gLedHwFunc[(int) ledName] ) ++ { ++ (*gLedHwFunc[(int) ledName]) (ledName, ledState); ++ ledOffFail(ledInfoPtr); ++ return; ++ } ++ else ++ if( ledState == kLedStateFail && gLedHwFailFunc[(int) ledName] ) ++ { ++ (*gLedHwFailFunc[(int) ledName]) (ledName, ledState); ++ ledOff(ledInfoPtr); ++ return; ++ } ++ ++#if 0 /* BROKEN */ ++ // Do not blink the WAN Data LED if at least one interface is in bridge mode. ++ if(gLedOffInBridgeMode == 1 && (ledName == kLedWanData || ledName == kLedPPP)) ++ { ++ static int BridgedProtocol = -1; ++ ++ if( BridgedProtocol == -1 ) ++ BridgedProtocol = isBridgedProtocol(); ++ ++ if( BridgedProtocol == TRUE ) ++ return; ++ } ++#endif ++ ++ // If the state is kLedStateFail and there is not a failure LED defined ++ // in the board parameters, change the state to kLedStateFastBlinkContinues. ++ if( ledState == kLedStateFail && ledInfoPtr->ledMaskFail == 0 ) ++ ledState = kLedStateFastBlinkContinues; ++ ++ switch (ledState) ++ { ++ case kLedStateOn: ++ // First, turn off the complimentary (failure) LED GPIO. ++ if( ledInfoPtr->ledMaskFail ) ++ ledOffFail(ledInfoPtr); ++ else ++ if( gLedHwFailFunc[(int) ledName] ) ++ (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff); ++ ++ // Next, turn on the specified LED GPIO. ++ ledOn(ledInfoPtr); ++ break; ++ ++ case kLedStateOff: ++ // First, turn off the complimentary (failure) LED GPIO. ++ if( ledInfoPtr->ledMaskFail ) ++ ledOffFail(ledInfoPtr); ++ else ++ if( gLedHwFailFunc[(int) ledName] ) ++ (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff); ++ ++ // Next, turn off the specified LED GPIO. ++ ledOff(ledInfoPtr); ++ break; ++ ++ case kLedStateFail: ++ // First, turn off the complimentary (normal) LED GPIO. ++ if( ledInfoPtr->ledMask ) ++ ledOff(ledInfoPtr); ++ else ++ if( gLedHwFunc[(int) ledName] ) ++ (*gLedHwFunc[(int) ledName]) (ledName, kLedStateOff); ++ ++ // Next, turn on (red) the specified LED GPIO. ++ ledOnFail(ledInfoPtr); ++ break; ++ ++ case kLedStateBlinkOnce: ++ // skip blinkOnce if it is already in Slow/Fast blink continues state ++ if (ledInfoPtr->savedLedState == kLedStateSlowBlinkContinues || ++ ledInfoPtr->savedLedState == kLedStateFastBlinkContinues) ++ ; ++ else ++ { ++ if (ledInfoPtr->blinkCountDown == 0) // skip the call if it is 1 ++ { ++ ledToggle(ledInfoPtr); ++ ledInfoPtr->blinkCountDown = 1; // it will be reset to 0 when timer expires ++ ledInfoPtr->ledState = kLedStateBlinkOnce; ++ ledTimerStart(); ++ } ++ } ++ break; ++ ++ case kLedStateSlowBlinkContinues: ++ ledInfoPtr->blinkCountDown = kSlowBlinkCount; ++ ledInfoPtr->ledState = kLedStateSlowBlinkContinues; ++ ledInfoPtr->savedLedState = kLedStateSlowBlinkContinues; ++ ledTimerStart(); ++ break; ++ ++ case kLedStateFastBlinkContinues: ++ ledInfoPtr->blinkCountDown = kFastBlinkCount; ++ ledInfoPtr->ledState = kLedStateFastBlinkContinues; ++ ledInfoPtr->savedLedState = kLedStateFastBlinkContinues; ++ ledTimerStart(); ++ break; ++ ++ default: ++ printk("Invalid led state\n"); ++ } ++} ++ ++// This function is called for an LED that is controlled by hardware. ++void kerSysLedRegisterHwHandler( BOARD_LED_NAME ledName, ++ HANDLE_LED_FUNC ledHwFunc, int ledFailType ) ++{ ++ if( (int) ledName < MAX_VIRT_LEDS ) ++ { ++ if( ledFailType == 1 ) ++ gLedHwFailFunc[(int) ledName] = ledHwFunc; ++ else ++ gLedHwFunc[(int) ledName] = ledHwFunc; ++ } ++} ++ +diff -urN linux.old/arch/mips/bcm963xx/board.c linux.dev/arch/mips/bcm963xx/board.c +--- linux.old/arch/mips/bcm963xx/board.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/board.c 2006-08-25 15:16:26.000000000 +0200 +@@ -0,0 +1,555 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++ ++/* Includes. */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include "boardparms.h" ++#include "bcm_intr.h" ++#include "board.h" ++#include "bcm_map_part.h" ++ ++static DEFINE_SPINLOCK(board_lock); ++ ++/* Typedefs. */ ++#if defined (NON_CONSECUTIVE_MAC) ++// used to be the last octet. Now changed to the first 5 bits of the the forth octet ++// to reduced the duplicated MAC addresses. ++#define CHANGED_OCTET 3 ++#define SHIFT_BITS 3 ++#else ++#define CHANGED_OCTET 1 ++#define SHIFT_BITS 0 ++#endif ++ ++typedef struct ++{ ++ unsigned long ulId; ++ char chInUse; ++ char chReserved[3]; ++} MAC_ADDR_INFO, *PMAC_ADDR_INFO; ++ ++typedef struct ++{ ++ unsigned long ulSdramSize; ++ unsigned long ulPsiSize; ++ unsigned long ulNumMacAddrs; ++ unsigned long ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN]; ++ MAC_ADDR_INFO MacAddrs[1]; ++} NVRAM_INFO, *PNVRAM_INFO; ++ ++typedef struct ++{ ++ unsigned long eventmask; ++} BOARD_IOC, *PBOARD_IOC; ++ ++ ++/*Dyinggasp callback*/ ++typedef void (*cb_dgasp_t)(void *arg); ++typedef struct _CB_DGASP__LIST ++{ ++ struct list_head list; ++ char name[IFNAMSIZ]; ++ cb_dgasp_t cb_dgasp_fn; ++ void *context; ++}CB_DGASP_LIST , *PCB_DGASP_LIST; ++ ++ ++static LED_MAP_PAIR LedMapping[] = ++{ // led name Initial state physical pin (ledMask) ++ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, ++ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, ++ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, ++ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, ++ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, ++ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, ++ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, ++ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, ++ {kLedEnd, kLedStateOff, 0, 0, 0, 0} // NOTE: kLedEnd has to be at the end. ++}; ++ ++/* Externs. */ ++extern struct file fastcall *fget_light(unsigned int fd, int *fput_needed); ++extern unsigned int nr_free_pages (void); ++extern const char *get_system_type(void); ++extern void kerSysFlashInit(void); ++extern unsigned long get_nvram_start_addr(void); ++extern unsigned long get_scratch_pad_start_addr(void); ++extern unsigned long getMemorySize(void); ++extern void __init boardLedInit(PLED_MAP_PAIR); ++extern void boardLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE); ++extern void kerSysLedRegisterHandler( BOARD_LED_NAME ledName, ++ HANDLE_LED_FUNC ledHwFunc, int ledFailType ); ++ ++/* Prototypes. */ ++void __init InitNvramInfo( void ); ++ ++/* DyingGasp function prototype */ ++static void __init kerSysDyingGaspMapIntr(void); ++static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id, struct pt_regs * regs); ++static void __init kerSysInitDyingGaspHandler( void ); ++static void __exit kerSysDeinitDyingGaspHandler( void ); ++/* -DyingGasp function prototype - */ ++ ++static PNVRAM_INFO g_pNvramInfo = NULL; ++static int g_ledInitialized = 0; ++static CB_DGASP_LIST *g_cb_dgasp_list_head = NULL; ++ ++static int g_wakeup_monitor = 0; ++static struct file *g_monitor_file = NULL; ++static struct task_struct *g_monitor_task = NULL; ++static unsigned int (*g_orig_fop_poll) ++ (struct file *, struct poll_table_struct *) = NULL; ++ ++void kerSysMipsSoftReset(void) ++{ ++ if (PERF->RevID == 0x634800A1) { ++ typedef void (*FNPTR) (void); ++ FNPTR bootaddr = (FNPTR) FLASH_BASE; ++ int i; ++ ++ /* Disable interrupts. */ ++ //cli(); ++ spin_lock_irq(&board_lock); ++ ++ /* Reset all blocks. */ ++ PERF->BlockSoftReset &= ~BSR_ALL_BLOCKS; ++ for( i = 0; i < 1000000; i++ ) ++ ; ++ PERF->BlockSoftReset |= BSR_ALL_BLOCKS; ++ /* Jump to the power on address. */ ++ (*bootaddr) (); ++ } ++ else ++ PERF->pll_control |= SOFT_RESET; // soft reset mips ++} ++ ++ ++int kerSysGetMacAddress( unsigned char *pucaMacAddr, unsigned long ulId ) ++{ ++ int nRet = 0; ++ PMAC_ADDR_INFO pMai = NULL; ++ PMAC_ADDR_INFO pMaiFreeNoId = NULL; ++ PMAC_ADDR_INFO pMaiFreeId = NULL; ++ unsigned long i = 0, ulIdxNoId = 0, ulIdxId = 0, shiftedIdx = 0; ++ ++ /* CMO -- Fix le problème avec les adresses mac que l'on n'arrive pas ++ * * à relire plusieurs fois */ ++ /* inv_xde */ ++ if (boot_loader_type == BOOT_CFE) ++ memcpy( pucaMacAddr, g_pNvramInfo->ucaBaseMacAddr, ++ NVRAM_MAC_ADDRESS_LEN ); ++ else { ++ pucaMacAddr[0] = 0x00; ++ pucaMacAddr[1] = 0x07; ++ pucaMacAddr[2] = 0x3A; ++ pucaMacAddr[3] = 0xFF; ++ pucaMacAddr[4] = 0xFF; ++ pucaMacAddr[5] = 0xFF; ++ } ++ ++ return nRet; ++} /* kerSysGetMacAddr */ ++ ++int kerSysReleaseMacAddress( unsigned char *pucaMacAddr ) ++{ ++ int nRet = -EINVAL; ++ unsigned long ulIdx = 0; ++ int idx = (pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] - ++ g_pNvramInfo->ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET]); ++ ++ // if overflow 255 (negitive), add 256 to have the correct index ++ if (idx < 0) ++ idx += 256; ++ ulIdx = (unsigned long) (idx >> SHIFT_BITS); ++ ++ if( ulIdx < g_pNvramInfo->ulNumMacAddrs ) ++ { ++ PMAC_ADDR_INFO pMai = &g_pNvramInfo->MacAddrs[ulIdx]; ++ if( pMai->chInUse == 1 ) ++ { ++ pMai->chInUse = 0; ++ nRet = 0; ++ } ++ } ++ ++ return( nRet ); ++} /* kerSysReleaseMacAddr */ ++ ++int kerSysGetSdramSize( void ) ++{ ++ if (boot_loader_type == BOOT_CFE) { ++ return( (int) g_pNvramInfo->ulSdramSize ); ++ } ++ else { ++ printk("kerSysGetSdramSize : 0x%08X\n", (int)getMemorySize() + 0x00040000); ++ return((int)getMemorySize() + 0x00040000); ++ } ++} /* kerSysGetSdramSize */ ++ ++ ++void kerSysLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState) ++{ ++ if (g_ledInitialized) ++ boardLedCtrl(ledName, ledState); ++} ++ ++unsigned int kerSysMonitorPollHook( struct file *f, struct poll_table_struct *t) ++{ ++ int mask = (*g_orig_fop_poll) (f, t); ++ ++ if( g_wakeup_monitor == 1 && g_monitor_file == f ) ++ { ++ /* If g_wakeup_monitor is non-0, the user mode application needs to ++ * return from a blocking select function. Return POLLPRI which will ++ * cause the select to return with the exception descriptor set. ++ */ ++ mask |= POLLPRI; ++ g_wakeup_monitor = 0; ++ } ++ ++ return( mask ); ++} ++ ++/* Put the user mode application that monitors link state on a run queue. */ ++void kerSysWakeupMonitorTask( void ) ++{ ++ g_wakeup_monitor = 1; ++ if( g_monitor_task ) ++ wake_up_process( g_monitor_task ); ++} ++ ++//<GPIOio; ++ ++ if( (gpio & ~BP_ACTIVE_MASK) >= 32 ) ++ { ++ gpio_mask = GPIO_NUM_TO_MASK_HIGH(gpio); ++ gpio_reg = &GPIO->GPIOio_high; ++ } ++ //printk("gpio=%04x,gpio_mask=%04x,gpio_reg=%04x\n",gpio,gpio_mask,*gpio_reg); ++ if(*gpio_reg & gpio_mask) //press down ++ return RESET_BUTTON_UP; ++ } ++ return RESET_BUTTON_PRESSDOWN; ++} ++//<WatchDogDefCount = timeUs * (FPERIPH/1000000); ++ TIMER->WatchDogCtl = 0xFF00; ++ TIMER->WatchDogCtl = 0x00FF; ++} ++ ++ulong kerSysGetCycleCount(void) ++{ ++ ulong cnt; ++#ifdef _WIN32_WCE ++ cnt = 0; ++#else ++ __asm volatile("mfc0 %0, $9":"=d"(cnt)); ++#endif ++ return(cnt); ++} ++ ++static Bool kerSysDyingGaspCheckPowerLoss(void) ++{ ++ ulong clk0; ++ ulong ulIntr; ++ ++ ulIntr = 0; ++ clk0 = kerSysGetCycleCount(); ++ ++ UART->Data = 'D'; ++ UART->Data = '%'; ++ UART->Data = 'G'; ++ ++#if defined(CONFIG_BCM96345) ++ BpGetAdslDyingGaspExtIntr( &ulIntr ); ++ ++ do { ++ ulong clk1; ++ ++ clk1 = kerSysGetCycleCount(); /* time cleared */ ++ /* wait a little to get new reading */ ++ while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2) ++ ; ++ } while ((0 == (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT)))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO)); ++ ++ if (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT))) { /* power glitch */ ++ BcmHalInterruptEnable( ulIntr + INTERRUPT_ID_EXTERNAL_0); ++ KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US); ++ return 0; ++ } ++#elif (defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)) && !defined(VXWORKS) ++ do { ++ ulong clk1; ++ ++ clk1 = kerSysGetCycleCount(); /* time cleared */ ++ /* wait a little to get new reading */ ++ while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2) ++ ; ++ } while ((PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO)); ++ ++ if (!(PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET)))) { ++ BcmHalInterruptEnable( INTERRUPT_ID_DG ); ++ KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US); ++ return 0; ++ } ++#endif ++ return 1; ++} ++ ++static void kerSysDyingGaspShutdown( void ) ++{ ++ kerSysSetWdTimer(1000000); ++#if defined(CONFIG_BCM96345) ++ PERF->blkEnables &= ~(EMAC_CLK_EN | USB_CLK_EN | CPU_CLK_EN); ++#elif defined(CONFIG_BCM96348) ++ PERF->blkEnables &= ~(EMAC_CLK_EN | USBS_CLK_EN | USBH_CLK_EN | SAR_CLK_EN); ++#endif ++} ++ ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) ++static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id, struct pt_regs * regs) ++#else ++static unsigned int kerSysDyingGaspIsr(void) ++#endif ++{ ++ struct list_head *pos; ++ CB_DGASP_LIST *tmp, *dsl = NULL; ++ ++ if (kerSysDyingGaspCheckPowerLoss()) { ++ ++ /* first to turn off everything other than dsl */ ++ list_for_each(pos, &g_cb_dgasp_list_head->list) { ++ tmp = list_entry(pos, CB_DGASP_LIST, list); ++ if(strncmp(tmp->name, "dsl", 3)) { ++ (tmp->cb_dgasp_fn)(tmp->context); ++ }else { ++ dsl = tmp; ++ } ++ } ++ ++ /* now send dgasp */ ++ if(dsl) ++ (dsl->cb_dgasp_fn)(dsl->context); ++ ++ /* reset and shutdown system */ ++ kerSysDyingGaspShutdown(); ++ } ++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) ++return( IRQ_HANDLED ); ++#else ++ return( 1 ); ++#endif ++} ++ ++static void __init kerSysInitDyingGaspHandler( void ) ++{ ++ CB_DGASP_LIST *new_node; ++ ++ if( g_cb_dgasp_list_head != NULL) { ++ printk("Error: kerSysInitDyingGaspHandler: list head is not null\n"); ++ return; ++ } ++ new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL); ++ memset(new_node, 0x00, sizeof(CB_DGASP_LIST)); ++ INIT_LIST_HEAD(&new_node->list); ++ g_cb_dgasp_list_head = new_node; ++ ++} /* kerSysInitDyingGaspHandler */ ++ ++static void __exit kerSysDeinitDyingGaspHandler( void ) ++{ ++ struct list_head *pos; ++ CB_DGASP_LIST *tmp; ++ ++ if(g_cb_dgasp_list_head == NULL) ++ return; ++ ++ list_for_each(pos, &g_cb_dgasp_list_head->list) { ++ tmp = list_entry(pos, CB_DGASP_LIST, list); ++ list_del(pos); ++ kfree(tmp); ++ } ++ ++ kfree(g_cb_dgasp_list_head); ++ g_cb_dgasp_list_head = NULL; ++ ++} /* kerSysDeinitDyingGaspHandler */ ++ ++void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context) ++{ ++ CB_DGASP_LIST *new_node; ++ ++ if( g_cb_dgasp_list_head == NULL) { ++ printk("Error: kerSysRegisterDyingGaspHandler: list head is null\n"); ++ return; ++ } ++ ++ if( devname == NULL || cbfn == NULL ) { ++ printk("Error: kerSysRegisterDyingGaspHandler: register info not enough (%s,%x,%x)\n", devname, (unsigned int)cbfn, (unsigned int)context); ++ return; ++ } ++ ++ new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL); ++ memset(new_node, 0x00, sizeof(CB_DGASP_LIST)); ++ INIT_LIST_HEAD(&new_node->list); ++ strncpy(new_node->name, devname, IFNAMSIZ); ++ new_node->cb_dgasp_fn = (cb_dgasp_t)cbfn; ++ new_node->context = context; ++ list_add(&new_node->list, &g_cb_dgasp_list_head->list); ++ ++ printk("dgasp: kerSysRegisterDyingGaspHandler: %s registered \n", devname); ++ ++} /* kerSysRegisterDyingGaspHandler */ ++ ++void kerSysDeregisterDyingGaspHandler(char *devname) ++{ ++ struct list_head *pos; ++ CB_DGASP_LIST *tmp; ++ ++ if(g_cb_dgasp_list_head == NULL) { ++ printk("Error: kerSysDeregisterDyingGaspHandler: list head is null\n"); ++ return; ++ } ++ ++ if(devname == NULL) { ++ printk("Error: kerSysDeregisterDyingGaspHandler: devname is null\n"); ++ return; ++ } ++ ++ printk("kerSysDeregisterDyingGaspHandler: %s is deregistering\n", devname); ++ ++ list_for_each(pos, &g_cb_dgasp_list_head->list) { ++ tmp = list_entry(pos, CB_DGASP_LIST, list); ++ if(!strcmp(tmp->name, devname)) { ++ list_del(pos); ++ kfree(tmp); ++ printk("kerSysDeregisterDyingGaspHandler: %s is deregistered\n", devname); ++ return; ++ } ++ } ++ printk("kerSysDeregisterDyingGaspHandler: %s not (de)registered\n", devname); ++ ++} /* kerSysDeregisterDyingGaspHandler */ ++ ++//EXPORT_SYMBOL(kerSysNvRamGet); ++EXPORT_SYMBOL(kerSysGetMacAddress); ++EXPORT_SYMBOL(kerSysReleaseMacAddress); ++EXPORT_SYMBOL(kerSysGetSdramSize); ++EXPORT_SYMBOL(kerSysLedCtrl); ++EXPORT_SYMBOL(kerSysGetResetHold); ++EXPORT_SYMBOL(kerSysLedRegisterHwHandler); ++EXPORT_SYMBOL(BpGetBoardIds); ++EXPORT_SYMBOL(BpGetSdramSize); ++EXPORT_SYMBOL(BpGetPsiSize); ++EXPORT_SYMBOL(BpGetEthernetMacInfo); ++EXPORT_SYMBOL(BpGetRj11InnerOuterPairGpios); ++EXPORT_SYMBOL(BpGetPressAndHoldResetGpio); ++EXPORT_SYMBOL(BpGetVoipResetGpio); ++EXPORT_SYMBOL(BpGetVoipIntrGpio); ++EXPORT_SYMBOL(BpGetPcmciaResetGpio); ++EXPORT_SYMBOL(BpGetRtsCtsUartGpios); ++EXPORT_SYMBOL(BpGetAdslLedGpio); ++EXPORT_SYMBOL(BpGetAdslFailLedGpio); ++EXPORT_SYMBOL(BpGetWirelessLedGpio); ++EXPORT_SYMBOL(BpGetUsbLedGpio); ++EXPORT_SYMBOL(BpGetHpnaLedGpio); ++EXPORT_SYMBOL(BpGetWanDataLedGpio); ++EXPORT_SYMBOL(BpGetPppLedGpio); ++EXPORT_SYMBOL(BpGetPppFailLedGpio); ++EXPORT_SYMBOL(BpGetVoipLedGpio); ++EXPORT_SYMBOL(BpGetWirelessExtIntr); ++EXPORT_SYMBOL(BpGetAdslDyingGaspExtIntr); ++EXPORT_SYMBOL(BpGetVoipExtIntr); ++EXPORT_SYMBOL(BpGetHpnaExtIntr); ++EXPORT_SYMBOL(BpGetHpnaChipSelect); ++EXPORT_SYMBOL(BpGetVoipChipSelect); ++EXPORT_SYMBOL(BpGetWirelessSesBtnGpio); ++EXPORT_SYMBOL(BpGetWirelessSesExtIntr); ++EXPORT_SYMBOL(BpGetWirelessSesLedGpio); ++EXPORT_SYMBOL(kerSysRegisterDyingGaspHandler); ++EXPORT_SYMBOL(kerSysDeregisterDyingGaspHandler); ++EXPORT_SYMBOL(kerSysGetCycleCount); ++EXPORT_SYMBOL(kerSysSetWdTimer); ++EXPORT_SYMBOL(kerSysWakeupMonitorTask); ++ +diff -urN linux.old/arch/mips/bcm963xx/boardparms.c linux.dev/arch/mips/bcm963xx/boardparms.c +--- linux.old/arch/mips/bcm963xx/boardparms.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/boardparms.c 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,2391 @@ ++/* ++<:copyright-gpl ++ ++ Copyright 2003 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++ ++:> ++*/ ++/************************************************************************** ++ * File Name : boardparms.c ++ * ++ * Description: This file contains the implementation for the BCM63xx board ++ * parameter access functions. ++ * ++ * Updates : 07/14/2003 Created. ++ ***************************************************************************/ ++ ++/* Includes. */ ++#include "boardparms.h" ++ ++/* Defines. */ ++ ++/* Default psi size in K bytes */ ++#define BP_PSI_DEFAULT_SIZE 24 ++ ++/* Typedefs */ ++typedef struct boardparameters ++{ ++ char szBoardId[BP_BOARD_ID_LEN]; /* board id string */ ++ ETHERNET_MAC_INFO EnetMacInfos[BP_MAX_ENET_MACS]; ++ VOIP_DSP_INFO VoIPDspInfo[BP_MAX_VOIP_DSP]; ++ unsigned short usSdramSize; /* SDRAM size and type */ ++ unsigned short usPsiSize; /* persistent storage in K bytes */ ++ unsigned short usGpioRj11InnerPair; /* GPIO pin or not defined */ ++ unsigned short usGpioRj11OuterPair; /* GPIO pin or not defined */ ++ unsigned short usGpioPressAndHoldReset; /* GPIO pin or not defined */ ++ unsigned short usGpioPcmciaReset; /* GPIO pin or not defined */ ++ unsigned short usGpioUartRts; /* GPIO pin or not defined */ ++ unsigned short usGpioUartCts; /* GPIO pin or not defined */ ++ unsigned short usGpioLedAdsl; /* GPIO pin or not defined */ ++ unsigned short usGpioLedAdslFail; /* GPIO pin or not defined */ ++ unsigned short usGpioLedWireless; /* GPIO pin or not defined */ ++ unsigned short usGpioLedUsb; /* GPIO pin or not defined */ ++ unsigned short usGpioLedHpna; /* GPIO pin or not defined */ ++ unsigned short usGpioLedWanData; /* GPIO pin or not defined */ ++ unsigned short usGpioLedPpp; /* GPIO pin or not defined */ ++ unsigned short usGpioLedPppFail; /* GPIO pin or not defined */ ++ unsigned short usGpioLedBlPowerOn; /* GPIO pin or not defined */ ++ unsigned short usGpioLedBlAlarm; /* GPIO pin or not defined */ ++ unsigned short usGpioLedBlResetCfg; /* GPIO pin or not defined */ ++ unsigned short usGpioLedBlStop; /* GPIO pin or not defined */ ++ unsigned short usExtIntrWireless; /* ext intr or not defined */ ++ unsigned short usExtIntrAdslDyingGasp; /* ext intr or not defined */ ++ unsigned short usExtIntrHpna; /* ext intr or not defined */ ++ unsigned short usCsHpna; /* chip select not defined */ ++ unsigned short usAntInUseWireless; /* antenna in use or not defined */ ++ unsigned short usGpioSesBtnWireless; /* GPIO pin or not defined */ ++ unsigned short usExtIntrSesBtnWireless; /* ext intr or not defined */ ++ unsigned short usGpioLedSesWireless; /* GPIO pin or not defined */ ++} BOARD_PARAMETERS, *PBOARD_PARAMETERS; ++ ++/* Variables */ ++#if defined(_BCM96338_) || defined(CONFIG_BCM96338) ++static BOARD_PARAMETERS g_bcm96338sv = ++{ ++ "96338SV", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_NOT_DEFINED, /* usGpioLedWanData */ ++ BP_NOT_DEFINED, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */ ++ BP_NOT_DEFINED, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++static BOARD_PARAMETERS g_bcm96338l2m8m = ++{ ++ "96338L-2M-8M", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++static PBOARD_PARAMETERS g_BoardParms[] = ++ {&g_bcm96338sv, &g_bcm96338l2m8m, 0}; ++#endif ++ ++#if defined(_BCM96345_) || defined(CONFIG_BCM96345) ++static BOARD_PARAMETERS g_bcm96345r = ++{ ++ "96345R", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_GPIO_11_AH, /* usGpioRj11InnerPair */ ++ BP_GPIO_12_AH, /* usGpioRj11OuterPair */ ++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_GPIO_8_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_8_AH, /* usGpioLedWanData */ ++ BP_GPIO_9_AH, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_8_AH, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96345gw2 = ++{ ++ /* A hardware jumper determines whether GPIO 13 is used for Press and Hold ++ * Reset or RTS. ++ */ ++ "96345GW2", /* szBoardId */ ++ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_GPIO_0_AH, /* usGpioPhySpiSck */ ++ BP_GPIO_4_AH, /* usGpioPhySpiSs */ ++ BP_GPIO_12_AH, /* usGpioPhySpiMosi */ ++ BP_GPIO_11_AH, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x04, /* numSwitchPorts */ ++ BP_ENET_CONFIG_GPIO, /* usConfigType */ ++ BP_ENET_REVERSE_MII}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_1, /* usExtIntrVoip */ ++ BP_GPIO_6_AH, /* usGpioVoipReset */ ++ BP_GPIO_15_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ ++ BP_GPIO_2_AH, /* usGpioPcmciaReset */ ++ BP_GPIO_13_AH, /* usGpioUartRts */ ++ BP_GPIO_9_AH, /* usGpioUartCts */ ++ BP_GPIO_8_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_GPIO_7_AH, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_8_AH, /* usGpioLedWanData */ ++ BP_NOT_DEFINED, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_7_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_8_AH, /* usGpioLedBlStop */ ++ BP_EXT_INTR_2, /* usExtIntrWireless */ ++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96345gw = ++{ ++ "96345GW", /* szBoardId */ ++ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x04, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_1, /* usExtIntrVoip */ ++ BP_GPIO_6_AH, /* usGpioVoipReset */ ++ BP_GPIO_15_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_GPIO_11_AH, /* usGpioRj11InnerPair */ ++ BP_GPIO_1_AH, /* usGpioRj11OuterPair */ ++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ ++ BP_GPIO_2_AH, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_GPIO_8_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_GPIO_10_AH, /* usGpioLedWireless */ ++ BP_GPIO_7_AH, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_8_AH, /* usGpioLedWanData */ ++ BP_NOT_DEFINED, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_9_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_10_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_8_AH, /* usGpioLedBlStop */ ++ BP_EXT_INTR_2, /* usExtIntrWireless */ ++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ ++ BP_EXT_INTR_3, /* usExtIntrHpna */ ++ BP_CS_1, /* usCsHpna */ ++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96335r = ++{ ++ "96335R", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_14_AH, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_GPIO_9_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_9_AH, /* usGpioLedWanData */ ++ BP_GPIO_8_AH, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_9_AH, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96345r0 = ++{ ++ "96345R0", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_GPIO_8_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_9_AH, /* usGpioLedWanData */ ++ BP_GPIO_9_AH, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_9_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_8_AH, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96345rs = ++{ ++ "96345RS", /* szBoardId */ ++ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_GPIO_11_AH, /* usGpioRj11InnerPair */ ++ BP_GPIO_12_AH, /* usGpioRj11OuterPair */ ++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_GPIO_8_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_8_AH, /* usGpioLedWanData */ ++ BP_GPIO_9_AH, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_8_AH, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static PBOARD_PARAMETERS g_BoardParms[] = ++ {&g_bcm96345r, &g_bcm96345gw2, &g_bcm96345gw, &g_bcm96335r, &g_bcm96345r0, ++ &g_bcm96345rs, 0}; ++#endif ++ ++#if defined(_BCM96348_) || defined(CONFIG_BCM96348) ++ ++static BOARD_PARAMETERS g_bcm96348r = ++{ ++ "96348R", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96348lv = ++{ ++ "96348LV", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */ ++ 0x02, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_GPIO_5_AL, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}}, /* usReverseMii */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96348gw = ++{ ++ "96348GW", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x03, /* numSwitchPorts */ ++ BP_ENET_CONFIG_SPI_SSB_0, /* usConfigType */ ++ BP_ENET_REVERSE_MII}}, /* usReverseMii */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_2, /* usExtIntrVoip */ ++ BP_GPIO_6_AH, /* usGpioVoipReset */ ++ BP_GPIO_34_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* BP_GPIO_35_AH, */ /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* BP_EXT_INTR_3, */ /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* BP_GPIO_0_AL */ /* usGpioLedSesWireless */ ++}; ++ ++ ++static BOARD_PARAMETERS g_bcm96348gw_10 = ++{ ++ "96348GW-10", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x03, /* numSwitchPorts */ ++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ ++ BP_ENET_REVERSE_MII}}, /* usReverseMii */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_2, /* usExtIntrVoip */ ++ BP_GPIO_6_AH, /* usGpioVoipReset */ ++ BP_GPIO_34_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96348gw_11 = ++{ ++ "96348GW-11", /* szBoardId */ ++ {{BP_ENET_NO_PHY}, /* ucPhyType */ ++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x04, /* numSwitchPorts */ ++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ ++ BP_ENET_REVERSE_MII}}, /* usReverseMii */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96348sv = ++{ ++ "96348SV", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */ ++ 0x1f, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}}, /* usReverseMii */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_32MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_NOT_DEFINED, /* usGpioLedWanData */ ++ BP_NOT_DEFINED, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */ ++ BP_NOT_DEFINED, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++ ++static BOARD_PARAMETERS g_bcm96348gw_dualDsp = ++{ ++ "96348GW-DualDSP", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x03, /* numSwitchPorts */ ++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ ++ BP_ENET_REVERSE_MII}}, /* usReverseMii */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_2, /* usExtIntrVoip */ ++ BP_UNEQUIPPED, /* usGpioVoipReset */ ++ BP_GPIO_34_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_DSP, /* ucDspType */ ++ 0x01, /* ucDspAddress */ ++ BP_EXT_INTR_3, /* usExtIntrVoip */ ++ BP_UNEQUIPPED , /* usGpioVoipReset */ ++ BP_GPIO_35_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_3}}, /* usCsVoip */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++ ++static BOARD_PARAMETERS g_bcmCustom_01 = ++{ ++ "BCMCUST_01", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ ++ BP_ENET_REVERSE_MII}}, /* usReverseMii */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_2, /* usExtIntrVoip */ ++ BP_GPIO_36_AH, /* usGpioVoipReset */ ++ BP_GPIO_34_AL, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static PBOARD_PARAMETERS g_BoardParms[] = ++ {&g_bcm96348r, &g_bcm96348lv, &g_bcm96348gw, &g_bcm96348gw_10, ++ &g_bcm96348gw_11, &g_bcm96348sv, &g_bcm96348gw_dualDsp, ++ &g_bcmCustom_01, 0}; ++#endif ++ ++static PBOARD_PARAMETERS g_pCurrentBp = 0; ++ ++/************************************************************************** ++ * Name : bpstrcmp ++ * ++ * Description: String compare for this file so it does not depend on an OS. ++ * (Linux kernel and CFE share this source file.) ++ * ++ * Parameters : [IN] dest - destination string ++ * [IN] src - source string ++ * ++ * Returns : -1 - dest < src, 1 - dest > src, 0 dest == src ++ ***************************************************************************/ ++static int bpstrcmp(const char *dest,const char *src); ++static int bpstrcmp(const char *dest,const char *src) ++{ ++ while (*src && *dest) ++ { ++ if (*dest < *src) return -1; ++ if (*dest > *src) return 1; ++ dest++; ++ src++; ++ } ++ ++ if (*dest && !*src) return 1; ++ if (!*dest && *src) return -1; ++ return 0; ++} /* bpstrcmp */ ++ ++/************************************************************************** ++ * Name : BpGetVoipDspConfig ++ * ++ * Description: Gets the DSP configuration from the board parameter ++ * structure for a given DSP index. ++ * ++ * Parameters : [IN] dspNum - DSP index (number) ++ * ++ * Returns : Pointer to DSP configuration block if found/valid, NULL ++ * otherwise. ++ ***************************************************************************/ ++VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum ); ++VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum ) ++{ ++ VOIP_DSP_INFO *pDspConfig = 0; ++ int i; ++ ++ if( g_pCurrentBp ) ++ { ++ for( i = 0 ; i < BP_MAX_VOIP_DSP ; i++ ) ++ { ++ if( g_pCurrentBp->VoIPDspInfo[i].ucDspType != BP_VOIP_NO_DSP && ++ g_pCurrentBp->VoIPDspInfo[i].ucDspAddress == dspNum ) ++ { ++ pDspConfig = &g_pCurrentBp->VoIPDspInfo[i]; ++ break; ++ } ++ } ++ } ++ ++ return pDspConfig; ++} ++ ++ ++/************************************************************************** ++ * Name : BpSetBoardId ++ * ++ * Description: This function find the BOARD_PARAMETERS structure for the ++ * specified board id string and assigns it to a global, static ++ * variable. ++ * ++ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not ++ * have a board parameters configuration record. ++ ***************************************************************************/ ++int BpSetBoardId( char *pszBoardId ) ++{ ++ int nRet = BP_BOARD_ID_NOT_FOUND; ++ PBOARD_PARAMETERS *ppBp; ++ ++ for( ppBp = g_BoardParms; *ppBp; ppBp++ ) ++ { ++ if( !bpstrcmp((*ppBp)->szBoardId, pszBoardId) ) ++ { ++ g_pCurrentBp = *ppBp; ++ nRet = BP_SUCCESS; ++ break; ++ } ++ } ++ ++ return( nRet ); ++} /* BpSetBoardId */ ++ ++/************************************************************************** ++ * Name : BpGetBoardIds ++ * ++ * Description: This function returns all of the supported board id strings. ++ * ++ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id ++ * strings are returned in. Each id starts at BP_BOARD_ID_LEN ++ * boundary. ++ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that ++ * were allocated in pszBoardIds. ++ * ++ * Returns : Number of board id strings returned. ++ ***************************************************************************/ ++int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize ) ++{ ++ PBOARD_PARAMETERS *ppBp; ++ int i; ++ char *src; ++ char *dest; ++ ++ for( i = 0, ppBp = g_BoardParms; *ppBp && nBoardIdsSize; ++ i++, ppBp++, nBoardIdsSize--, pszBoardIds += BP_BOARD_ID_LEN ) ++ { ++ dest = pszBoardIds; ++ src = (*ppBp)->szBoardId; ++ while( *src ) ++ *dest++ = *src++; ++ *dest = '\0'; ++ } ++ ++ return( i ); ++} /* BpGetBoardIds */ ++ ++/************************************************************************** ++ * Name : BpGetEthernetMacInfo ++ * ++ * Description: This function returns all of the supported board id strings. ++ * ++ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO ++ * buffers. ++ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that ++ * are pointed to by pEnetInfos. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos ) ++{ ++ int i, nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ ) ++ { ++ if( i < BP_MAX_ENET_MACS ) ++ { ++ unsigned char *src = (unsigned char *) ++ &g_pCurrentBp->EnetMacInfos[i]; ++ unsigned char *dest = (unsigned char *) pEnetInfos; ++ int len = sizeof(ETHERNET_MAC_INFO); ++ while( len-- ) ++ *dest++ = *src++; ++ } ++ else ++ pEnetInfos->ucPhyType = BP_ENET_NO_PHY; ++ } ++ ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ ) ++ pEnetInfos->ucPhyType = BP_ENET_NO_PHY; ++ ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetEthernetMacInfo */ ++ ++/************************************************************************** ++ * Name : BpGetSdramSize ++ * ++ * Description: This function returns a constant that describees the board's ++ * SDRAM type and size. ++ * ++ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size ++ * is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetSdramSize( unsigned long *pulSdramSize ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulSdramSize = g_pCurrentBp->usSdramSize; ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ *pulSdramSize = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetSdramSize */ ++ ++/************************************************************************** ++ * Name : BpGetPsiSize ++ * ++ * Description: This function returns the persistent storage size in K bytes. ++ * ++ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent ++ * storage size is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetPsiSize( unsigned long *pulPsiSize ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulPsiSize = g_pCurrentBp->usPsiSize; ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ *pulPsiSize = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetPsiSize */ ++ ++/************************************************************************** ++ * Name : BpGetRj11InnerOuterPairGpios ++ * ++ * Description: This function returns the GPIO pin assignments for changing ++ * between the RJ11 inner pair and RJ11 outer pair. ++ * ++ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair ++ * GPIO pin is returned in. ++ * [OUT] pusOuter - Address of short word that the RJ11 outer pair ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, values are returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner, ++ unsigned short *pusOuter ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusInner = g_pCurrentBp->usGpioRj11InnerPair; ++ *pusOuter = g_pCurrentBp->usGpioRj11OuterPair; ++ ++ if( g_pCurrentBp->usGpioRj11InnerPair != BP_NOT_DEFINED && ++ g_pCurrentBp->usGpioRj11OuterPair != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusInner = *pusOuter = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetRj11InnerOuterPairGpios */ ++ ++/************************************************************************** ++ * Name : BpGetPressAndHoldResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the press ++ * and hold reset button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the press and hold ++ * reset button GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPressAndHoldResetGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioPressAndHoldReset; ++ ++ if( g_pCurrentBp->usGpioPressAndHoldReset != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetPressAndHoldResetGpio */ ++ ++/************************************************************************** ++ * Name : BpGetVoipResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the VOIP ++ * Reset operation. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset ++ * GPIO pin is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); ++ ++ if( pDspInfo ) ++ { ++ *pusValue = pDspInfo->usGpioVoipReset; ++ ++ if( *pusValue != BP_NOT_DEFINED || ++ *pusValue == BP_UNEQUIPPED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_FOUND; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetVoipResetGpio */ ++ ++/************************************************************************** ++ * Name : BpGetVoipIntrGpio ++ * ++ * Description: This function returns the GPIO pin assignment for VoIP interrupt. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt ++ * GPIO pin is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); ++ ++ if( pDspInfo ) ++ { ++ *pusValue = pDspInfo->usGpioVoipIntr; ++ ++ if( *pusValue != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_FOUND; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetVoipIntrGpio */ ++ ++/************************************************************************** ++ * Name : BpGetPcmciaResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PCMCIA ++ * Reset operation. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPcmciaResetGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioPcmciaReset; ++ ++ if( g_pCurrentBp->usGpioPcmciaReset != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetPcmciaResetGpio */ ++ ++/************************************************************************** ++ * Name : BpGetUartRtsCtsGpios ++ * ++ * Description: This function returns the GPIO pin assignments for RTS and CTS ++ * UART signals. ++ * ++ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO ++ * pin is returned in. ++ * [OUT] pusCts - Address of short word that the UART CTS GPIO ++ * pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, values are returned. ++ * BP_BOARD_ID_NOT_SET - Error, board id input string does not ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusRts = g_pCurrentBp->usGpioUartRts; ++ *pusCts = g_pCurrentBp->usGpioUartCts; ++ ++ if( g_pCurrentBp->usGpioUartRts != BP_NOT_DEFINED && ++ g_pCurrentBp->usGpioUartCts != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusRts = *pusCts = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetUartRtsCtsGpios */ ++ ++/************************************************************************** ++ * Name : BpGetAdslLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the ADSL ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedAdsl; ++ ++ if( g_pCurrentBp->usGpioLedAdsl != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetAdslLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetAdslFailLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the ADSL ++ * LED that is used when there is a DSL connection failure. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslFailLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedAdslFail; ++ ++ if( g_pCurrentBp->usGpioLedAdslFail != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetAdslFailLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedWireless; ++ ++ if( g_pCurrentBp->usGpioLedWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetWirelessLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessAntInUse ++ * ++ * Description: This function returns the antennas in use for wireless ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna ++ * is in use. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessAntInUse( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usAntInUseWireless; ++ ++ if( g_pCurrentBp->usAntInUseWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetWirelessAntInUse */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesBtnGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * Ses Button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesBtnGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioSesBtnWireless; ++ ++ if( g_pCurrentBp->usGpioSesBtnWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetWirelessSesBtnGpio */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesExtIntr ++ * ++ * Description: This function returns the external interrupt number for the ++ * Wireless Ses Button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses ++ * external interrup is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesExtIntr( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usExtIntrSesBtnWireless; ++ ++ if( g_pCurrentBp->usExtIntrSesBtnWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++ ++} /* BpGetWirelessSesExtIntr */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * Ses Led. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses ++ * Led GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedSesWireless; ++ ++ if( g_pCurrentBp->usGpioLedSesWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++ ++} /* BpGetWirelessSesLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetUsbLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the USB ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the USB LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetUsbLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedUsb; ++ ++ if( g_pCurrentBp->usGpioLedUsb != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetUsbLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetHpnaLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the HPNA ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedHpna; ++ ++ if( g_pCurrentBp->usGpioLedHpna != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetHpnaLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetWanDataLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the WAN Data ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWanDataLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedWanData; ++ ++ if( g_pCurrentBp->usGpioLedWanData != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetWanDataLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetPppLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PPP ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPppLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedPpp; ++ ++ if( g_pCurrentBp->usGpioLedPpp != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetPppLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetPppFailLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PPP ++ * LED that is used when there is a PPP connection failure. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPppFailLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedPppFail; ++ ++ if( g_pCurrentBp->usGpioLedPppFail != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetPppFailLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetBootloaderPowerOnLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the power ++ * on LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedBlPowerOn; ++ ++ if( g_pCurrentBp->usGpioLedBlPowerOn != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetBootloaderPowerOn */ ++ ++/************************************************************************** ++ * Name : BpGetBootloaderAlarmLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the alarm ++ * LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedBlAlarm; ++ ++ if( g_pCurrentBp->usGpioLedBlAlarm != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetBootloaderAlarmLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetBootloaderResetCfgLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the reset ++ * configuration LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the reset ++ * configuration LED GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedBlResetCfg; ++ ++ if( g_pCurrentBp->usGpioLedBlResetCfg != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetBootloaderResetCfgLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetBootloaderStopLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the break ++ * into bootloader LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the break into ++ * bootloader LED GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderStopLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedBlStop; ++ ++ if( g_pCurrentBp->usGpioLedBlStop != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetBootloaderStopLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetVoipLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the VOIP ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ * ++ * Note : The VoIP structure would allow for having one LED per DSP ++ * however, the board initialization function assumes only one ++ * LED per functionality (ie one LED for VoIP). Therefore in ++ * order to keep this tidy and simple we do not make usage of the ++ * one-LED-per-DSP function. Instead, we assume that the LED for ++ * VoIP is unique and associated with DSP 0 (always present on ++ * any VoIP platform). If changing this to a LED-per-DSP function ++ * then one need to update the board initialization driver in ++ * bcmdrivers\opensource\char\board\bcm963xx\impl1 ++ ***************************************************************************/ ++int BpGetVoipLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( 0 ); ++ ++ if( pDspInfo ) ++ { ++ *pusValue = pDspInfo->usGpioLedVoip; ++ ++ if( *pusValue != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_FOUND; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetVoipLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessExtIntr ++ * ++ * Description: This function returns the Wireless external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the wireless ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessExtIntr( unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulValue = g_pCurrentBp->usExtIntrWireless; ++ ++ if( g_pCurrentBp->usExtIntrWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetWirelessExtIntr */ ++ ++/************************************************************************** ++ * Name : BpGetAdslDyingGaspExtIntr ++ * ++ * Description: This function returns the ADSL Dying Gasp external interrupt ++ * number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulValue = g_pCurrentBp->usExtIntrAdslDyingGasp; ++ ++ if( g_pCurrentBp->usExtIntrAdslDyingGasp != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetAdslDyingGaspExtIntr */ ++ ++/************************************************************************** ++ * Name : BpGetVoipExtIntr ++ * ++ * Description: This function returns the VOIP external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the VOIP ++ * external interrupt number is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); ++ ++ if( pDspInfo ) ++ { ++ *pulValue = pDspInfo->usExtIntrVoip; ++ ++ if( *pulValue != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_FOUND; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetVoipExtIntr */ ++ ++/************************************************************************** ++ * Name : BpGetHpnaExtIntr ++ * ++ * Description: This function returns the HPNA external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the HPNA ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaExtIntr( unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulValue = g_pCurrentBp->usExtIntrHpna; ++ ++ if( g_pCurrentBp->usExtIntrHpna != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetHpnaExtIntr */ ++ ++/************************************************************************** ++ * Name : BpGetHpnaChipSelect ++ * ++ * Description: This function returns the HPNA chip select number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the HPNA ++ * chip select number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaChipSelect( unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulValue = g_pCurrentBp->usCsHpna; ++ ++ if( g_pCurrentBp->usCsHpna != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetHpnaChipSelect */ ++ ++/************************************************************************** ++ * Name : BpGetVoipChipSelect ++ * ++ * Description: This function returns the VOIP chip select number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the VOIP ++ * chip select number is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); ++ ++ if( pDspInfo ) ++ { ++ *pulValue = pDspInfo->usCsVoip; ++ ++ if( *pulValue != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_FOUND; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetVoipChipSelect */ ++ +diff -urN linux.old/arch/mips/bcm963xx/boardparms.h linux.dev/arch/mips/bcm963xx/boardparms.h +--- linux.old/arch/mips/bcm963xx/boardparms.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/boardparms.h 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,758 @@ ++/* ++<:copyright-gpl ++ ++ Copyright 2003 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++ ++:> ++*/ ++/************************************************************************** ++ * File Name : boardparms.h ++ * ++ * Description: This file contains definitions and function prototypes for ++ * the BCM63xx board parameter access functions. ++ * ++ * Updates : 07/14/2003 Created. ++ ***************************************************************************/ ++ ++#if !defined(_BOARDPARMS_H) ++#define _BOARDPARMS_H ++ ++/* Return codes. */ ++#define BP_SUCCESS 0 ++#define BP_BOARD_ID_NOT_FOUND 1 ++#define BP_VALUE_NOT_DEFINED 2 ++#define BP_BOARD_ID_NOT_SET 3 ++ ++/* Values for BpGetSdramSize. */ ++#define BP_MEMORY_8MB_1_CHIP 0 ++#define BP_MEMORY_16MB_1_CHIP 1 ++#define BP_MEMORY_32MB_1_CHIP 2 ++#define BP_MEMORY_64MB_2_CHIP 3 ++#define BP_MEMORY_32MB_2_CHIP 4 ++#define BP_MEMORY_16MB_2_CHIP 5 ++ ++/* Values for EthernetMacInfo PhyType. */ ++#define BP_ENET_NO_PHY 0 ++#define BP_ENET_INTERNAL_PHY 1 ++#define BP_ENET_EXTERNAL_PHY 2 ++#define BP_ENET_EXTERNAL_SWITCH 3 ++ ++/* Values for EthernetMacInfo Configuration type. */ ++#define BP_ENET_CONFIG_MDIO 0 /* Internal PHY, External PHY, Switch+(no GPIO, no SPI, no MDIO Pseudo phy */ ++#define BP_ENET_CONFIG_GPIO 1 /* Bcm96345GW board + Bcm5325M/E */ ++#define BP_ENET_CONFIG_MDIO_PSEUDO_PHY 2 /* Bcm96348GW board + Bcm5325E */ ++#define BP_ENET_CONFIG_SPI_SSB_0 3 /* Bcm96348GW board + Bcm5325M/E */ ++#define BP_ENET_CONFIG_SPI_SSB_1 4 /* Bcm96348GW board + Bcm5325M/E */ ++#define BP_ENET_CONFIG_SPI_SSB_2 5 /* Bcm96348GW board + Bcm5325M/E */ ++#define BP_ENET_CONFIG_SPI_SSB_3 6 /* Bcm96348GW board + Bcm5325M/E */ ++ ++/* Values for EthernetMacInfo Reverse MII. */ ++#define BP_ENET_NO_REVERSE_MII 0 ++#define BP_ENET_REVERSE_MII 1 ++ ++/* Values for VoIPDSPInfo DSPType. */ ++#define BP_VOIP_NO_DSP 0 ++#define BP_VOIP_DSP 1 ++ ++ ++/* Values for GPIO pin assignments (AH = Active High, AL = Active Low). */ ++#define BP_ACTIVE_MASK 0x8000 ++#define BP_ACTIVE_HIGH 0x0000 ++#define BP_ACTIVE_LOW 0x8000 ++#define BP_GPIO_0_AH (0 | BP_ACTIVE_HIGH) ++#define BP_GPIO_0_AL (0 | BP_ACTIVE_LOW) ++#define BP_GPIO_1_AH (1 | BP_ACTIVE_HIGH) ++#define BP_GPIO_1_AL (1 | BP_ACTIVE_LOW) ++#define BP_GPIO_2_AH (2 | BP_ACTIVE_HIGH) ++#define BP_GPIO_2_AL (2 | BP_ACTIVE_LOW) ++#define BP_GPIO_3_AH (3 | BP_ACTIVE_HIGH) ++#define BP_GPIO_3_AL (3 | BP_ACTIVE_LOW) ++#define BP_GPIO_4_AH (4 | BP_ACTIVE_HIGH) ++#define BP_GPIO_4_AL (4 | BP_ACTIVE_LOW) ++#define BP_GPIO_5_AH (5 | BP_ACTIVE_HIGH) ++#define BP_GPIO_5_AL (5 | BP_ACTIVE_LOW) ++#define BP_GPIO_6_AH (6 | BP_ACTIVE_HIGH) ++#define BP_GPIO_6_AL (6 | BP_ACTIVE_LOW) ++#define BP_GPIO_7_AH (7 | BP_ACTIVE_HIGH) ++#define BP_GPIO_7_AL (7 | BP_ACTIVE_LOW) ++#define BP_GPIO_8_AH (8 | BP_ACTIVE_HIGH) ++#define BP_GPIO_8_AL (8 | BP_ACTIVE_LOW) ++#define BP_GPIO_9_AH (9 | BP_ACTIVE_HIGH) ++#define BP_GPIO_9_AL (9 | BP_ACTIVE_LOW) ++#define BP_GPIO_10_AH (10 | BP_ACTIVE_HIGH) ++#define BP_GPIO_10_AL (10 | BP_ACTIVE_LOW) ++#define BP_GPIO_11_AH (11 | BP_ACTIVE_HIGH) ++#define BP_GPIO_11_AL (11 | BP_ACTIVE_LOW) ++#define BP_GPIO_12_AH (12 | BP_ACTIVE_HIGH) ++#define BP_GPIO_12_AL (12 | BP_ACTIVE_LOW) ++#define BP_GPIO_13_AH (13 | BP_ACTIVE_HIGH) ++#define BP_GPIO_13_AL (13 | BP_ACTIVE_LOW) ++#define BP_GPIO_14_AH (14 | BP_ACTIVE_HIGH) ++#define BP_GPIO_14_AL (14 | BP_ACTIVE_LOW) ++#define BP_GPIO_15_AH (15 | BP_ACTIVE_HIGH) ++#define BP_GPIO_15_AL (15 | BP_ACTIVE_LOW) ++#define BP_GPIO_16_AH (16 | BP_ACTIVE_HIGH) ++#define BP_GPIO_16_AL (16 | BP_ACTIVE_LOW) ++#define BP_GPIO_17_AH (17 | BP_ACTIVE_HIGH) ++#define BP_GPIO_17_AL (17 | BP_ACTIVE_LOW) ++#define BP_GPIO_18_AH (18 | BP_ACTIVE_HIGH) ++#define BP_GPIO_18_AL (18 | BP_ACTIVE_LOW) ++#define BP_GPIO_19_AH (19 | BP_ACTIVE_HIGH) ++#define BP_GPIO_19_AL (19 | BP_ACTIVE_LOW) ++#define BP_GPIO_20_AH (20 | BP_ACTIVE_HIGH) ++#define BP_GPIO_20_AL (20 | BP_ACTIVE_LOW) ++#define BP_GPIO_21_AH (21 | BP_ACTIVE_HIGH) ++#define BP_GPIO_21_AL (21 | BP_ACTIVE_LOW) ++#define BP_GPIO_22_AH (22 | BP_ACTIVE_HIGH) ++#define BP_GPIO_22_AL (22 | BP_ACTIVE_LOW) ++#define BP_GPIO_23_AH (23 | BP_ACTIVE_HIGH) ++#define BP_GPIO_23_AL (23 | BP_ACTIVE_LOW) ++#define BP_GPIO_24_AH (24 | BP_ACTIVE_HIGH) ++#define BP_GPIO_24_AL (24 | BP_ACTIVE_LOW) ++#define BP_GPIO_25_AH (25 | BP_ACTIVE_HIGH) ++#define BP_GPIO_25_AL (25 | BP_ACTIVE_LOW) ++#define BP_GPIO_26_AH (26 | BP_ACTIVE_HIGH) ++#define BP_GPIO_26_AL (26 | BP_ACTIVE_LOW) ++#define BP_GPIO_27_AH (27 | BP_ACTIVE_HIGH) ++#define BP_GPIO_27_AL (27 | BP_ACTIVE_LOW) ++#define BP_GPIO_28_AH (28 | BP_ACTIVE_HIGH) ++#define BP_GPIO_28_AL (28 | BP_ACTIVE_LOW) ++#define BP_GPIO_29_AH (29 | BP_ACTIVE_HIGH) ++#define BP_GPIO_29_AL (29 | BP_ACTIVE_LOW) ++#define BP_GPIO_30_AH (30 | BP_ACTIVE_HIGH) ++#define BP_GPIO_30_AL (30 | BP_ACTIVE_LOW) ++#define BP_GPIO_31_AH (31 | BP_ACTIVE_HIGH) ++#define BP_GPIO_31_AL (31 | BP_ACTIVE_LOW) ++#define BP_GPIO_32_AH (32 | BP_ACTIVE_HIGH) ++#define BP_GPIO_32_AL (32 | BP_ACTIVE_LOW) ++#define BP_GPIO_33_AH (33 | BP_ACTIVE_HIGH) ++#define BP_GPIO_33_AL (33 | BP_ACTIVE_LOW) ++#define BP_GPIO_34_AH (34 | BP_ACTIVE_HIGH) ++#define BP_GPIO_34_AL (34 | BP_ACTIVE_LOW) ++#define BP_GPIO_35_AH (35 | BP_ACTIVE_HIGH) ++#define BP_GPIO_35_AL (35 | BP_ACTIVE_LOW) ++#define BP_GPIO_36_AH (36 | BP_ACTIVE_HIGH) ++#define BP_GPIO_36_AL (36 | BP_ACTIVE_LOW) ++ ++/* Values for external interrupt assignments. */ ++#define BP_EXT_INTR_0 0 ++#define BP_EXT_INTR_1 1 ++#define BP_EXT_INTR_2 2 ++#define BP_EXT_INTR_3 3 ++ ++/* Values for chip select assignments. */ ++#define BP_CS_0 0 ++#define BP_CS_1 1 ++#define BP_CS_2 2 ++#define BP_CS_3 3 ++ ++/* Value for GPIO and external interrupt fields that are not used. */ ++#define BP_NOT_DEFINED 0xffff ++#define BP_HW_DEFINED 0xfff0 ++#define BP_UNEQUIPPED 0xfff1 ++ ++/* Maximum size of the board id string. */ ++#define BP_BOARD_ID_LEN 16 ++ ++/* Maximum number of Ethernet MACs. */ ++#define BP_MAX_ENET_MACS 2 ++ ++/* Maximum number of VoIP DSPs. */ ++#define BP_MAX_VOIP_DSP 2 ++ ++/* Wireless Antenna Settings. */ ++#define BP_WLAN_ANT_MAIN 0 ++#define BP_WLAN_ANT_AUX 1 ++#define BP_WLAN_ANT_BOTH 3 ++ ++#if !defined(__ASSEMBLER__) ++ ++/* Information about an Ethernet MAC. If ucPhyType is BP_ENET_NO_PHY, ++ * then the other fields are not valid. ++ */ ++typedef struct EthernetMacInfo ++{ ++ unsigned char ucPhyType; /* BP_ENET_xxx */ ++ unsigned char ucPhyAddress; /* 0 to 31 */ ++ unsigned short usGpioPhySpiSck; /* GPIO pin or not defined */ ++ unsigned short usGpioPhySpiSs; /* GPIO pin or not defined */ ++ unsigned short usGpioPhySpiMosi; /* GPIO pin or not defined */ ++ unsigned short usGpioPhySpiMiso; /* GPIO pin or not defined */ ++ unsigned short usGpioPhyReset; /* GPIO pin or not defined (96348LV) */ ++ unsigned short numSwitchPorts; /* Number of PHY ports */ ++ unsigned short usConfigType; /* Configuration type */ ++ unsigned short usReverseMii; /* Reverse MII */ ++} ETHERNET_MAC_INFO, *PETHERNET_MAC_INFO; ++ ++ ++/* Information about VoIP DSPs. If ucDspType is BP_VOIP_NO_DSP, ++ * then the other fields are not valid. ++ */ ++typedef struct VoIPDspInfo ++{ ++ unsigned char ucDspType; ++ unsigned char ucDspAddress; ++ unsigned short usExtIntrVoip; ++ unsigned short usGpioVoipReset; ++ unsigned short usGpioVoipIntr; ++ unsigned short usGpioLedVoip; ++ unsigned short usCsVoip; ++ ++} VOIP_DSP_INFO; ++ ++ ++/************************************************************************** ++ * Name : BpSetBoardId ++ * ++ * Description: This function find the BOARD_PARAMETERS structure for the ++ * specified board id string and assigns it to a global, static ++ * variable. ++ * ++ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not ++ * have a board parameters configuration record. ++ ***************************************************************************/ ++int BpSetBoardId( char *pszBoardId ); ++ ++/************************************************************************** ++ * Name : BpGetBoardIds ++ * ++ * Description: This function returns all of the supported board id strings. ++ * ++ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id ++ * strings are returned in. Each id starts at BP_BOARD_ID_LEN ++ * boundary. ++ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that ++ * were allocated in pszBoardIds. ++ * ++ * Returns : Number of board id strings returned. ++ ***************************************************************************/ ++int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize ); ++ ++/************************************************************************** ++ * Name : BpGetEthernetMacInfo ++ * ++ * Description: This function returns all of the supported board id strings. ++ * ++ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO ++ * buffers. ++ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that ++ * are pointed to by pEnetInfos. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos ); ++ ++/************************************************************************** ++ * Name : BpGetSdramSize ++ * ++ * Description: This function returns a constant that describees the board's ++ * SDRAM type and size. ++ * ++ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size ++ * is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetSdramSize( unsigned long *pulSdramSize ); ++ ++/************************************************************************** ++ * Name : BpGetPsiSize ++ * ++ * Description: This function returns the persistent storage size in K bytes. ++ * ++ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent ++ * storage size is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetPsiSize( unsigned long *pulPsiSize ); ++ ++/************************************************************************** ++ * Name : BpGetRj11InnerOuterPairGpios ++ * ++ * Description: This function returns the GPIO pin assignments for changing ++ * between the RJ11 inner pair and RJ11 outer pair. ++ * ++ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair ++ * GPIO pin is returned in. ++ * [OUT] pusOuter - Address of short word that the RJ11 outer pair ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, values are returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner, ++ unsigned short *pusOuter ); ++ ++/************************************************************************** ++ * Name : BpGetPressAndHoldResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the press ++ * and hold reset button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the press and hold ++ * reset button GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPressAndHoldResetGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetVoipResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the VOIP ++ * Reset operation. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset ++ * GPIO pin is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetVoipIntrGpio ++ * ++ * Description: This function returns the GPIO pin assignment for VoIP interrupt. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt ++ * GPIO pin is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetPcmciaResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PCMCIA ++ * Reset operation. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPcmciaResetGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetUartRtsCtsGpios ++ * ++ * Description: This function returns the GPIO pin assignments for RTS and CTS ++ * UART signals. ++ * ++ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO ++ * pin is returned in. ++ * [OUT] pusCts - Address of short word that the UART CTS GPIO ++ * pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, values are returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts ); ++ ++/************************************************************************** ++ * Name : BpGetAdslLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the ADSL ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetAdslFailLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the ADSL ++ * LED that is used when there is a DSL connection failure. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslFailLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessAntInUse ++ * ++ * Description: This function returns the antennas in use for wireless ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna ++ * is in use. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessAntInUse( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesBtnGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * Ses Button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses ++ * Button GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesBtnGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesExtIntr ++ * ++ * Description: This function returns the external interrupt number for the ++ * Wireless Ses Button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses ++ * external interrup is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesExtIntr( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * Ses Led. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses ++ * Led GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetUsbLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the USB ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the USB LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetUsbLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetHpnaLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the HPNA ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWanDataLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the WAN Data ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWanDataLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetPppLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PPP ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPppLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetPppFailLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PPP ++ * LED that is used when there is a PPP connection failure. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPppFailLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetVoipLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the VOIP ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetBootloaderPowerOnLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the power ++ * on LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetBootloaderAlarmLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the alarm ++ * LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetBootloaderResetCfgLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the reset ++ * configuration LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the reset ++ * configuration LED GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetBootloaderStopLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the break ++ * into bootloader LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the break into ++ * bootloader LED GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderStopLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessExtIntr ++ * ++ * Description: This function returns the Wireless external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the wireless ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessExtIntr( unsigned long *pulValue ); ++ ++/************************************************************************** ++ * Name : BpGetAdslDyingGaspExtIntr ++ * ++ * Description: This function returns the ADSL Dying Gasp external interrupt ++ * number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue ); ++ ++/************************************************************************** ++ * Name : BpGetVoipExtIntr ++ * ++ * Description: This function returns the VOIP external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the VOIP ++ * external interrupt number is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue ); ++ ++/************************************************************************** ++ * Name : BpGetHpnaExtIntr ++ * ++ * Description: This function returns the HPNA external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the HPNA ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaExtIntr( unsigned long *pulValue ); ++ ++/************************************************************************** ++ * Name : BpGetHpnaChipSelect ++ * ++ * Description: This function returns the HPNA chip select number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the HPNA ++ * chip select number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaChipSelect( unsigned long *pulValue ); ++ ++/************************************************************************** ++ * Name : BpGetVoipChipSelect ++ * ++ * Description: This function returns the VOIP chip select number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the VOIP ++ * chip select number is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue ); ++ ++#endif /* __ASSEMBLER__ */ ++ ++#endif /* _BOARDPARMS_H */ ++ +diff -urN linux.old/arch/mips/bcm963xx/include/6338_intr.h linux.dev/arch/mips/bcm963xx/include/6338_intr.h +--- linux.old/arch/mips/bcm963xx/include/6338_intr.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/include/6338_intr.h 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,64 @@ ++/* ++<:copyright-gpl ++ Copyright 2003 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++ ++#ifndef __6338_INTR_H ++#define __6338_INTR_H ++ ++/*=====================================================================*/ ++/* BCM6338 External Interrupt Level Assignments */ ++/*=====================================================================*/ ++#define INTERRUPT_ID_EXTERNAL_0 3 ++#define INTERRUPT_ID_EXTERNAL_1 4 ++#define INTERRUPT_ID_EXTERNAL_2 5 ++#define INTERRUPT_ID_EXTERNAL_3 6 ++ ++/*=====================================================================*/ ++/* BCM6338 Timer Interrupt Level Assignments */ ++/*=====================================================================*/ ++#define MIPS_TIMER_INT 7 ++ ++/*=====================================================================*/ ++/* Peripheral ISR Table Offset */ ++/*=====================================================================*/ ++#define INTERNAL_ISR_TABLE_OFFSET 8 ++ ++/*=====================================================================*/ ++/* Logical Peripheral Interrupt IDs */ ++/*=====================================================================*/ ++ ++#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0) ++#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1) ++#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2) ++#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 4) ++#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 5) ++#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 6) ++#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 7) ++#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8) ++#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9) ++#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 10) ++#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 11) ++#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 12) ++#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 13) ++#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14) ++#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15) ++#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16) ++#define INTERRUPT_ID_SDIO (INTERNAL_ISR_TABLE_OFFSET + 17) ++ ++#endif /* __BCM6338_H */ ++ +diff -urN linux.old/arch/mips/bcm963xx/include/6338_map_part.h linux.dev/arch/mips/bcm963xx/include/6338_map_part.h +--- linux.old/arch/mips/bcm963xx/include/6338_map_part.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/include/6338_map_part.h 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,334 @@ ++/* ++<:copyright-gpl ++ Copyright 2004 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++ ++#ifndef __BCM6338_MAP_H ++#define __BCM6338_MAP_H ++ ++#include "bcmtypes.h" ++ ++#define PERF_BASE 0xfffe0000 ++#define TIMR_BASE 0xfffe0200 ++#define UART_BASE 0xfffe0300 ++#define GPIO_BASE 0xfffe0400 ++#define SPI_BASE 0xfffe0c00 ++ ++typedef struct PerfControl { ++ uint32 RevID; ++ uint16 testControl; ++ uint16 blkEnables; ++#define EMAC_CLK_EN 0x0010 ++#define USBS_CLK_EN 0x0010 ++#define SAR_CLK_EN 0x0020 ++ ++#define SPI_CLK_EN 0x0200 ++ ++ uint32 pll_control; ++#define SOFT_RESET 0x00000001 ++ ++ uint32 IrqMask; ++ uint32 IrqStatus; ++ ++ uint32 ExtIrqCfg; ++#define EI_SENSE_SHFT 0 ++#define EI_STATUS_SHFT 5 ++#define EI_CLEAR_SHFT 10 ++#define EI_MASK_SHFT 15 ++#define EI_INSENS_SHFT 20 ++#define EI_LEVEL_SHFT 25 ++ ++ uint32 unused[4]; /* (18) */ ++ uint32 BlockSoftReset; /* (28) */ ++#define BSR_SPI 0x00000001 ++#define BSR_EMAC 0x00000004 ++#define BSR_USBH 0x00000008 ++#define BSR_USBS 0x00000010 ++#define BSR_ADSL 0x00000020 ++#define BSR_DMAMEM 0x00000040 ++#define BSR_SAR 0x00000080 ++#define BSR_ACLC 0x00000100 ++#define BSR_ADSL_MIPS_PLL 0x00000400 ++#define BSR_ALL_BLOCKS \ ++ (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \ ++ BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL) ++} PerfControl; ++ ++#define PERF ((volatile PerfControl * const) PERF_BASE) ++ ++ ++typedef struct Timer { ++ uint16 unused0; ++ byte TimerMask; ++#define TIMER0EN 0x01 ++#define TIMER1EN 0x02 ++#define TIMER2EN 0x04 ++ byte TimerInts; ++#define TIMER0 0x01 ++#define TIMER1 0x02 ++#define TIMER2 0x04 ++#define WATCHDOG 0x08 ++ uint32 TimerCtl0; ++ uint32 TimerCtl1; ++ uint32 TimerCtl2; ++#define TIMERENABLE 0x80000000 ++#define RSTCNTCLR 0x40000000 ++ uint32 TimerCnt0; ++ uint32 TimerCnt1; ++ uint32 TimerCnt2; ++ uint32 WatchDogDefCount; ++ ++ /* Write 0xff00 0x00ff to Start timer ++ * Write 0xee00 0x00ee to Stop and re-load default count ++ * Read from this register returns current watch dog count ++ */ ++ uint32 WatchDogCtl; ++ ++ /* Number of 40-MHz ticks for WD Reset pulse to last */ ++ uint32 WDResetCount; ++} Timer; ++ ++#define TIMER ((volatile Timer * const) TIMR_BASE) ++typedef struct UartChannel { ++ byte unused0; ++ byte control; ++#define BRGEN 0x80 /* Control register bit defs */ ++#define TXEN 0x40 ++#define RXEN 0x20 ++#define LOOPBK 0x10 ++#define TXPARITYEN 0x08 ++#define TXPARITYEVEN 0x04 ++#define RXPARITYEN 0x02 ++#define RXPARITYEVEN 0x01 ++ ++ byte config; ++#define XMITBREAK 0x40 ++#define BITS5SYM 0x00 ++#define BITS6SYM 0x10 ++#define BITS7SYM 0x20 ++#define BITS8SYM 0x30 ++#define ONESTOP 0x07 ++#define TWOSTOP 0x0f ++ /* 4-LSBS represent STOP bits/char ++ * in 1/8 bit-time intervals. Zero ++ * represents 1/8 stop bit interval. ++ * Fifteen represents 2 stop bits. ++ */ ++ byte fifoctl; ++#define RSTTXFIFOS 0x80 ++#define RSTRXFIFOS 0x40 ++ /* 5-bit TimeoutCnt is in low bits of this register. ++ * This count represents the number of characters ++ * idle times before setting receive Irq when below threshold ++ */ ++ uint32 baudword; ++ /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate ++ */ ++ ++ byte txf_levl; /* Read-only fifo depth */ ++ byte rxf_levl; /* Read-only fifo depth */ ++ byte fifocfg; /* Upper 4-bits are TxThresh, Lower are ++ * RxThreshold. Irq can be asserted ++ * when rx fifo> thresh, txfifo ++*/ ++ ++#ifndef __6345_INTR_H ++#define __6345_INTR_H ++ ++ ++/*=====================================================================*/ ++/* BCM6345 External Interrupt Level Assignments */ ++/*=====================================================================*/ ++#define INTERRUPT_ID_EXTERNAL_0 3 ++#define INTERRUPT_ID_EXTERNAL_1 4 ++#define INTERRUPT_ID_EXTERNAL_2 5 ++#define INTERRUPT_ID_EXTERNAL_3 6 ++ ++/*=====================================================================*/ ++/* BCM6345 Timer Interrupt Level Assignments */ ++/*=====================================================================*/ ++#define MIPS_TIMER_INT 7 ++ ++/*=====================================================================*/ ++/* Peripheral ISR Table Offset */ ++/*=====================================================================*/ ++#define INTERNAL_ISR_TABLE_OFFSET 8 ++#define DMA_ISR_TABLE_OFFSET (INTERNAL_ISR_TABLE_OFFSET + 13) ++ ++/*=====================================================================*/ ++/* Logical Peripheral Interrupt IDs */ ++/*=====================================================================*/ ++ ++/* Internal peripheral interrupt IDs */ ++#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0) ++#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2) ++#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 3) ++#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 4) ++#define INTERRUPT_ID_USB (INTERNAL_ISR_TABLE_OFFSET + 5) ++#define INTERRUPT_ID_EMAC (INTERNAL_ISR_TABLE_OFFSET + 8) ++#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 12) ++ ++/* DMA channel interrupt IDs */ ++#define INTERRUPT_ID_EMAC_RX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_RX_CHAN) ++#define INTERRUPT_ID_EMAC_TX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_TX_CHAN) ++#define INTERRUPT_ID_EBI_RX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_RX_CHAN) ++#define INTERRUPT_ID_EBI_TX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_TX_CHAN) ++#define INTERRUPT_ID_RESERVED_RX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_RX_CHAN) ++#define INTERRUPT_ID_RESERVED_TX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_TX_CHAN) ++#define INTERRUPT_ID_USB_BULK_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_RX_CHAN) ++#define INTERRUPT_ID_USB_BULK_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_TX_CHAN) ++#define INTERRUPT_ID_USB_CNTL_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_RX_CHAN) ++#define INTERRUPT_ID_USB_CNTL_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_TX_CHAN) ++#define INTERRUPT_ID_USB_ISO_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_RX_CHAN) ++#define INTERRUPT_ID_USB_ISO_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_TX_CHAN) ++ ++ ++#endif /* __BCM6345_H */ ++ +diff -urN linux.old/arch/mips/bcm963xx/include/6345_map_part.h linux.dev/arch/mips/bcm963xx/include/6345_map_part.h +--- linux.old/arch/mips/bcm963xx/include/6345_map_part.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/include/6345_map_part.h 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,163 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++ ++#ifndef __BCM6345_MAP_H ++#define __BCM6345_MAP_H ++ ++ ++#include "bcmtypes.h" ++#include "6345_intr.h" ++ ++typedef struct IntControl { ++ uint32 RevID; ++ uint16 testControl; ++ uint16 blkEnables; ++#define USB_CLK_EN 0x0100 ++#define EMAC_CLK_EN 0x0080 ++#define UART_CLK_EN 0x0008 ++#define CPU_CLK_EN 0x0001 ++ ++ uint32 pll_control; ++#define SOFT_RESET 0x00000001 ++ ++ uint32 IrqMask; ++ uint32 IrqStatus; ++ ++ uint32 ExtIrqCfg; ++#define EI_SENSE_SHFT 0 ++#define EI_STATUS_SHFT 4 ++#define EI_CLEAR_SHFT 8 ++#define EI_MASK_SHFT 12 ++#define EI_INSENS_SHFT 16 ++#define EI_LEVEL_SHFT 20 ++} IntControl; ++ ++#define INTC_BASE 0xfffe0000 ++#define PERF ((volatile IntControl * const) INTC_BASE) ++ ++#define TIMR_BASE 0xfffe0200 ++typedef struct Timer { ++ uint16 unused0; ++ byte TimerMask; ++#define TIMER0EN 0x01 ++#define TIMER1EN 0x02 ++#define TIMER2EN 0x04 ++ byte TimerInts; ++#define TIMER0 0x01 ++#define TIMER1 0x02 ++#define TIMER2 0x04 ++#define WATCHDOG 0x08 ++ uint32 TimerCtl0; ++ uint32 TimerCtl1; ++ uint32 TimerCtl2; ++#define TIMERENABLE 0x80000000 ++#define RSTCNTCLR 0x40000000 ++ uint32 TimerCnt0; ++ uint32 TimerCnt1; ++ uint32 TimerCnt2; ++ uint32 WatchDogDefCount; ++ ++ /* Write 0xff00 0x00ff to Start timer ++ * Write 0xee00 0x00ee to Stop and re-load default count ++ * Read from this register returns current watch dog count ++ */ ++ uint32 WatchDogCtl; ++ ++ /* Number of 40-MHz ticks for WD Reset pulse to last */ ++ uint32 WDResetCount; ++} Timer; ++ ++#define TIMER ((volatile Timer * const) TIMR_BASE) ++ ++typedef struct UartChannel { ++ byte unused0; ++ byte control; ++#define BRGEN 0x80 /* Control register bit defs */ ++#define TXEN 0x40 ++#define RXEN 0x20 ++#define TXPARITYEN 0x08 ++#define TXPARITYEVEN 0x04 ++#define RXPARITYEN 0x02 ++#define RXPARITYEVEN 0x01 ++ byte config; ++#define BITS5SYM 0x00 ++#define BITS6SYM 0x10 ++#define BITS7SYM 0x20 ++#define BITS8SYM 0x30 ++#define XMITBREAK 0x40 ++#define ONESTOP 0x07 ++#define TWOSTOP 0x0f ++ ++ byte fifoctl; ++#define RSTTXFIFOS 0x80 ++#define RSTRXFIFOS 0x40 ++ uint32 baudword; ++ ++ byte txf_levl; ++ byte rxf_levl; ++ byte fifocfg; ++ byte prog_out; ++ ++ byte unused1; ++ byte DeltaIPEdgeNoSense; ++ byte DeltaIPConfig_Mask; ++ byte DeltaIP_SyncIP; ++ uint16 intMask; ++ uint16 intStatus; ++#define TXUNDERR 0x0002 ++#define TXOVFERR 0x0004 ++#define TXFIFOEMT 0x0020 ++#define RXOVFERR 0x0080 ++#define RXFIFONE 0x0800 ++#define RXFRAMERR 0x1000 ++#define RXPARERR 0x2000 ++#define RXBRK 0x4000 ++ ++ uint16 unused2; ++ uint16 Data; ++ uint32 unused3; ++ uint32 unused4; ++} Uart; ++ ++#define UART_BASE 0xfffe0300 ++#define UART ((volatile Uart * const) UART_BASE) ++ ++typedef struct GpioControl { ++ uint16 unused0; ++ byte unused1; ++ byte TBusSel; ++ ++ uint16 unused2; ++ uint16 GPIODir; ++ byte unused3; ++ byte Leds; ++ uint16 GPIOio; ++ ++ uint32 UartCtl; ++} GpioControl; ++ ++#define GPIO_BASE 0xfffe0400 ++#define GPIO ((volatile GpioControl * const) GPIO_BASE) ++ ++#define GPIO_NUM_MAX_BITS_MASK 0x0f ++#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK)) ++ ++ ++#endif ++ +diff -urN linux.old/arch/mips/bcm963xx/include/6348_intr.h linux.dev/arch/mips/bcm963xx/include/6348_intr.h +--- linux.old/arch/mips/bcm963xx/include/6348_intr.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/include/6348_intr.h 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,74 @@ ++/* ++<:copyright-gpl ++ Copyright 2003 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++ ++#ifndef __6348_INTR_H ++#define __6348_INTR_H ++ ++ ++/*=====================================================================*/ ++/* BCM6348 External Interrupt Level Assignments */ ++/*=====================================================================*/ ++#define INTERRUPT_ID_EXTERNAL_0 3 ++#define INTERRUPT_ID_EXTERNAL_1 4 ++#define INTERRUPT_ID_EXTERNAL_2 5 ++#define INTERRUPT_ID_EXTERNAL_3 6 ++ ++/*=====================================================================*/ ++/* BCM6348 Timer Interrupt Level Assignments */ ++/*=====================================================================*/ ++#define MIPS_TIMER_INT 7 ++ ++/*=====================================================================*/ ++/* Peripheral ISR Table Offset */ ++/*=====================================================================*/ ++#define INTERNAL_ISR_TABLE_OFFSET 8 ++ ++/*=====================================================================*/ ++/* Logical Peripheral Interrupt IDs */ ++/*=====================================================================*/ ++ ++#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0) ++#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1) ++#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2) ++#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 4) ++#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 5) ++#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 6) ++#define INTERRUPT_ID_EMAC2 (INTERNAL_ISR_TABLE_OFFSET + 7) ++#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8) ++#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9) ++#define INTERRUPT_ID_M2M (INTERNAL_ISR_TABLE_OFFSET + 10) ++#define INTERRUPT_ID_ACLC (INTERNAL_ISR_TABLE_OFFSET + 11) ++#define INTERRUPT_ID_USBH (INTERNAL_ISR_TABLE_OFFSET + 12) ++#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 13) ++#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14) ++#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15) ++#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16) ++#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 17) ++#define INTERRUPT_ID_USB_ISO_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 18) ++#define INTERRUPT_ID_USB_ISO_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 19) ++#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 20) ++#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 21) ++#define INTERRUPT_ID_EMAC2_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 22) ++#define INTERRUPT_ID_EMAC2_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 23) ++#define INTERRUPT_ID_MPI (INTERNAL_ISR_TABLE_OFFSET + 24) ++#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 25) ++ ++ ++#endif /* __BCM6348_H */ ++ +diff -urN linux.old/arch/mips/bcm963xx/include/6348_map_part.h linux.dev/arch/mips/bcm963xx/include/6348_map_part.h +--- linux.old/arch/mips/bcm963xx/include/6348_map_part.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/include/6348_map_part.h 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,500 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++ ++#ifndef __BCM6348_MAP_H ++#define __BCM6348_MAP_H ++ ++#include "bcmtypes.h" ++ ++#define PERF_BASE 0xfffe0000 ++#define TIMR_BASE 0xfffe0200 ++#define UART_BASE 0xfffe0300 ++#define GPIO_BASE 0xfffe0400 ++#define MPI_BASE 0xfffe2000 /* MPI control registers */ ++#define USB_HOST_BASE 0xfffe1b00 /* USB host registers */ ++#define USB_HOST_NON_OHCI 0xfffe1c00 /* USB host non-OHCI registers */ ++ ++typedef struct PerfControl { ++ uint32 RevID; ++ uint16 testControl; ++ uint16 blkEnables; ++#define EMAC_CLK_EN 0x0010 ++#define SAR_CLK_EN 0x0020 ++#define USBS_CLK_EN 0x0040 ++#define USBH_CLK_EN 0x0100 ++ ++ uint32 pll_control; ++#define SOFT_RESET 0x00000001 ++ ++ uint32 IrqMask; ++ uint32 IrqStatus; ++ ++ uint32 ExtIrqCfg; ++#define EI_SENSE_SHFT 0 ++#define EI_STATUS_SHFT 5 ++#define EI_CLEAR_SHFT 10 ++#define EI_MASK_SHFT 15 ++#define EI_INSENS_SHFT 20 ++#define EI_LEVEL_SHFT 25 ++ ++ uint32 unused[4]; /* (18) */ ++ uint32 BlockSoftReset; /* (28) */ ++#define BSR_SPI 0x00000001 ++#define BSR_EMAC 0x00000004 ++#define BSR_USBH 0x00000008 ++#define BSR_USBS 0x00000010 ++#define BSR_ADSL 0x00000020 ++#define BSR_DMAMEM 0x00000040 ++#define BSR_SAR 0x00000080 ++#define BSR_ACLC 0x00000100 ++#define BSR_ADSL_MIPS_PLL 0x00000400 ++#define BSR_ALL_BLOCKS \ ++ (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \ ++ BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL) ++ uint32 unused2[2]; /* (2c) */ ++ uint32 PllStrap; /* (34) */ ++#define PLL_N1_SHFT 20 ++#define PLL_N1_MASK (7< thresh, txfifo= 32) ? (1 << ((X-32) & GPIO_NUM_MAX_BITS_MASK_HIGH)) : (0) ) ++ ++ ++/* ++** External Bus Interface ++*/ ++typedef struct EbiChipSelect { ++ uint32 base; /* base address in upper 24 bits */ ++#define EBI_SIZE_8K 0 ++#define EBI_SIZE_16K 1 ++#define EBI_SIZE_32K 2 ++#define EBI_SIZE_64K 3 ++#define EBI_SIZE_128K 4 ++#define EBI_SIZE_256K 5 ++#define EBI_SIZE_512K 6 ++#define EBI_SIZE_1M 7 ++#define EBI_SIZE_2M 8 ++#define EBI_SIZE_4M 9 ++#define EBI_SIZE_8M 10 ++#define EBI_SIZE_16M 11 ++#define EBI_SIZE_32M 12 ++#define EBI_SIZE_64M 13 ++#define EBI_SIZE_128M 14 ++#define EBI_SIZE_256M 15 ++ uint32 config; ++#define EBI_ENABLE 0x00000001 /* .. enable this range */ ++#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */ ++#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */ ++#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */ ++#define EBI_WREN 0x00000020 /* enable posted writes */ ++#define EBI_POLARITY 0x00000040 /* .. set to invert something, ++ ** don't know what yet */ ++#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */ ++#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */ ++#define EBI_FIFO 0x00000200 /* .. use fifo */ ++#define EBI_RE 0x00000400 /* .. Reverse Endian */ ++} EbiChipSelect; ++ ++typedef struct MpiRegisters { ++ EbiChipSelect cs[7]; /* size chip select configuration */ ++#define EBI_CS0_BASE 0 ++#define EBI_CS1_BASE 1 ++#define EBI_CS2_BASE 2 ++#define EBI_CS3_BASE 3 ++#define PCMCIA_COMMON_BASE 4 ++#define PCMCIA_ATTRIBUTE_BASE 5 ++#define PCMCIA_IO_BASE 6 ++ uint32 unused0[2]; /* reserved */ ++ uint32 ebi_control; /* ebi control */ ++ uint32 unused1[4]; /* reserved */ ++#define EBI_ACCESS_TIMEOUT 0x000007FF ++ uint32 pcmcia_cntl1; /* pcmcia control 1 */ ++#define PCCARD_CARD_RESET 0x00040000 ++#define CARDBUS_ENABLE 0x00008000 ++#define PCMCIA_ENABLE 0x00004000 ++#define PCMCIA_GPIO_ENABLE 0x00002000 ++#define CARDBUS_IDSEL 0x00001F00 ++#define VS2_OEN 0x00000080 ++#define VS1_OEN 0x00000040 ++#define VS2_OUT 0x00000020 ++#define VS1_OUT 0x00000010 ++#define VS2_IN 0x00000008 ++#define VS1_IN 0x00000004 ++#define CD2_IN 0x00000002 ++#define CD1_IN 0x00000001 ++#define VS_MASK 0x0000000C ++#define CD_MASK 0x00000003 ++ uint32 unused2; /* reserved */ ++ uint32 pcmcia_cntl2; /* pcmcia control 2 */ ++#define PCMCIA_BYTESWAP_DIS 0x00000002 ++#define PCMCIA_HALFWORD_EN 0x00000001 ++#define RW_ACTIVE_CNT_BIT 2 ++#define INACTIVE_CNT_BIT 8 ++#define CE_SETUP_CNT_BIT 16 ++#define CE_HOLD_CNT_BIT 24 ++ uint32 unused3[40]; /* reserved */ ++ ++ uint32 sp0range; /* PCI to internal system bus address space */ ++ uint32 sp0remap; ++ uint32 sp0cfg; ++ uint32 sp1range; ++ uint32 sp1remap; ++ uint32 sp1cfg; ++ ++ uint32 EndianCfg; ++ ++ uint32 l2pcfgctl; /* internal system bus to PCI IO/Cfg control */ ++#define DIR_CFG_SEL 0x80000000 /* change from PCI I/O access to PCI config access */ ++#define DIR_CFG_USEREG 0x40000000 /* use this register info for PCI configuration access */ ++#define DEVICE_NUMBER 0x00007C00 /* device number for the PCI configuration access */ ++#define FUNC_NUMBER 0x00000300 /* function number for the PCI configuration access */ ++#define REG_NUMBER 0x000000FC /* register number for the PCI configuration access */ ++#define CONFIG_TYPE 0x00000003 /* configuration type for the PCI configuration access */ ++ ++ uint32 l2pmrange1; /* internal system bus to PCI memory space */ ++#define PCI_SIZE_64K 0xFFFF0000 ++#define PCI_SIZE_128K 0xFFFE0000 ++#define PCI_SIZE_256K 0xFFFC0000 ++#define PCI_SIZE_512K 0xFFF80000 ++#define PCI_SIZE_1M 0xFFF00000 ++#define PCI_SIZE_2M 0xFFE00000 ++#define PCI_SIZE_4M 0xFFC00000 ++#define PCI_SIZE_8M 0xFF800000 ++#define PCI_SIZE_16M 0xFF000000 ++#define PCI_SIZE_32M 0xFE000000 ++ uint32 l2pmbase1; /* kseg0 or kseg1 address & 0x1FFFFFFF */ ++ uint32 l2pmremap1; ++#define CARDBUS_MEM 0x00000004 ++#define MEM_WINDOW_EN 0x00000001 ++ uint32 l2pmrange2; ++ uint32 l2pmbase2; ++ uint32 l2pmremap2; ++ uint32 l2piorange; /* internal system bus to PCI I/O space */ ++ uint32 l2piobase; ++ uint32 l2pioremap; ++ ++ uint32 pcimodesel; ++#define PCI2_INT_BUS_RD_PREFECH 0x000000F0 ++#define PCI_BAR2_NOSWAP 0x00000002 /* BAR at offset 0x20 */ ++#define PCI_BAR1_NOSWAP 0x00000001 /* BAR at affset 0x1c */ ++ ++ uint32 pciintstat; /* PCI interrupt mask/status */ ++#define MAILBOX1_SENT 0x08 ++#define MAILBOX0_SENT 0x04 ++#define MAILBOX1_MSG_RCV 0x02 ++#define MAILBOX0_MSG_RCV 0x01 ++ uint32 locbuscntrl; /* internal system bus control */ ++#define DIR_U2P_NOSWAP 0x00000002 ++#define EN_PCI_GPIO 0x00000001 ++ uint32 locintstat; /* internal system bus interrupt mask/status */ ++#define CSERR 0x0200 ++#define SERR 0x0100 ++#define EXT_PCI_INT 0x0080 ++#define DIR_FAILED 0x0040 ++#define DIR_COMPLETE 0x0020 ++#define PCI_CFG 0x0010 ++ uint32 unused5[7]; ++ ++ uint32 mailbox0; ++ uint32 mailbox1; ++ ++ uint32 pcicfgcntrl; /* internal system bus PCI configuration control */ ++#define PCI_CFG_REG_WRITE_EN 0x00000080 ++#define PCI_CFG_ADDR 0x0000003C ++ uint32 pcicfgdata; /* internal system bus PCI configuration data */ ++ ++ uint32 locch2ctl; /* PCI to interrnal system bus DMA (downstream) local control */ ++#define MPI_DMA_HALT 0x00000008 /* idle after finish current memory burst */ ++#define MPI_DMA_PKT_HALT 0x00000004 /* idle after an EOP flag is detected */ ++#define MPI_DMA_STALL 0x00000002 /* idle after an EOP flag is detected */ ++#define MPI_DMA_ENABLE 0x00000001 /* set to enable channel */ ++ uint32 locch2intStat; ++#define MPI_DMA_NO_DESC 0x00000004 /* no valid descriptors */ ++#define MPI_DMA_DONE 0x00000002 /* packet xfer complete */ ++#define MPI_DMA_BUFF_DONE 0x00000001 /* buffer done */ ++ uint32 locch2intMask; ++ uint32 unused6; ++ uint32 locch2descaddr; ++ uint32 locch2status1; ++#define LOCAL_DESC_STATE 0xE0000000 ++#define PCI_DESC_STATE 0x1C000000 ++#define BYTE_DONE 0x03FFC000 ++#define RING_ADDR 0x00003FFF ++ uint32 locch2status2; ++#define BUFPTR_OFFSET 0x1FFF0000 ++#define PCI_MASTER_STATE 0x000000C0 ++#define LOC_MASTER_STATE 0x00000038 ++#define CONTROL_STATE 0x00000007 ++ uint32 unused7; ++ ++ uint32 locch1Ctl; /*internal system bus to PCI DMA (upstream) local control */ ++#define DMA_U2P_LE 0x00000200 /* local bus is little endian */ ++#define DMA_U2P_NOSWAP 0x00000100 /* lccal bus is little endian but no data swapped */ ++ uint32 locch1intstat; ++ uint32 locch1intmask; ++ uint32 unused8; ++ uint32 locch1descaddr; ++ uint32 locch1status1; ++ uint32 locch1status2; ++ uint32 unused9; ++ ++ uint32 pcich1ctl; /* internal system bus to PCI DMA PCI control */ ++ uint32 pcich1intstat; ++ uint32 pcich1intmask; ++ uint32 pcich1descaddr; ++ uint32 pcich1status1; ++ uint32 pcich1status2; ++ ++ uint32 pcich2Ctl; /* PCI to internal system bus DMA PCI control */ ++ uint32 pcich2intstat; ++ uint32 pcich2intmask; ++ uint32 pcich2descaddr; ++ uint32 pcich2status1; ++ uint32 pcich2status2; ++ ++ uint32 perm_id; /* permanent device and vendor id */ ++ uint32 perm_rev; /* permanent revision id */ ++} MpiRegisters; ++ ++#define MPI ((volatile MpiRegisters * const) MPI_BASE) ++ ++/* PCI configuration address space start offset 0x40 */ ++#define BRCM_PCI_CONFIG_TIMER 0x40 ++#define BRCM_PCI_CONFIG_TIMER_RETRY_MASK 0x0000FF00 ++#define BRCM_PCI_CONFIG_TIMER_TRDY_MASK 0x000000FF ++ ++/* USB host non-Open HCI register, USB_HOST_NON_OHCI, bit definitions. */ ++#define NON_OHCI_ENABLE_PORT1 0x00000001 /* Use USB port 1 for host, not dev */ ++#define NON_OHCI_BYTE_SWAP 0x00000008 /* Swap USB host registers */ ++ ++#define USBH_NON_OHCI ((volatile unsigned long * const) USB_HOST_NON_OHCI) ++ ++#endif ++ +diff -urN linux.old/arch/mips/bcm963xx/include/bcm_intr.h linux.dev/arch/mips/bcm963xx/include/bcm_intr.h +--- linux.old/arch/mips/bcm963xx/include/bcm_intr.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/include/bcm_intr.h 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,59 @@ ++/* ++<:copyright-gpl ++ Copyright 2003 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++ ++#ifndef __BCM_INTR_H ++#define __BCM_INTR_H ++ ++#ifdef __cplusplus ++ extern "C" { ++#endif ++ ++#if defined(CONFIG_BCM96338) ++#include <6338_intr.h> ++#endif ++#if defined(CONFIG_BCM96345) ++#include <6345_intr.h> ++#endif ++#if defined(CONFIG_BCM96348) ++#include <6348_intr.h> ++#endif ++ ++/* defines */ ++struct pt_regs; ++typedef int (*FN_HANDLER) (int, void *, struct pt_regs *); ++ ++/* prototypes */ ++extern void enable_brcm_irq(unsigned int irq); ++extern void disable_brcm_irq(unsigned int irq); ++extern int request_external_irq(unsigned int irq, ++ FN_HANDLER handler, unsigned long irqflags, ++ const char * devname, void *dev_id); ++extern unsigned int BcmHalMapInterrupt(FN_HANDLER isr, unsigned int param, ++ unsigned int interruptId); ++extern void dump_intr_regs(void); ++ ++/* compatibility definitions */ ++#define BcmHalInterruptEnable(irq) enable_brcm_irq( irq ) ++#define BcmHalInterruptDisable(irq) disable_brcm_irq( irq ) ++ ++#ifdef __cplusplus ++ } ++#endif ++ ++#endif +diff -urN linux.old/arch/mips/bcm963xx/include/bcm_map_part.h linux.dev/arch/mips/bcm963xx/include/bcm_map_part.h +--- linux.old/arch/mips/bcm963xx/include/bcm_map_part.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/include/bcm_map_part.h 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,34 @@ ++/* ++<:copyright-gpl ++ Copyright 2004 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++ ++#ifndef __BCM_MAP_PART_H ++#define __BCM_MAP_PART_H ++ ++#if defined(CONFIG_BCM96338) ++#include <6338_map_part.h> ++#endif ++#if defined(CONFIG_BCM96345) ++#include <6345_map_part.h> ++#endif ++#if defined(CONFIG_BCM96348) ++#include <6348_map_part.h> ++#endif ++ ++#endif ++ +diff -urN linux.old/arch/mips/bcm963xx/include/bcmpci.h linux.dev/arch/mips/bcm963xx/include/bcmpci.h +--- linux.old/arch/mips/bcm963xx/include/bcmpci.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/include/bcmpci.h 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,87 @@ ++/* ++<:copyright-gpl ++ Copyright 2004 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++ ++// ++// bcmpci.h - bcm96348 PCI, Cardbus, and PCMCIA definition ++// ++#ifndef BCMPCI_H ++#define BCMPCI_H ++ ++/* Memory window in internal system bus address space */ ++#define BCM_PCI_MEM_BASE 0x08000000 ++/* IO window in internal system bus address space */ ++#define BCM_PCI_IO_BASE 0x0C000000 ++ ++#define BCM_PCI_ADDR_MASK 0x1fffffff ++ ++/* Memory window size (range) */ ++#define BCM_PCI_MEM_SIZE_16MB 0x01000000 ++/* IO window size (range) */ ++#define BCM_PCI_IO_SIZE_64KB 0x00010000 ++ ++/* PCI Configuration and I/O space acesss */ ++#define BCM_PCI_CFG(d, f, o) ( (d << 11) | (f << 8) | (o/4 << 2) ) ++ ++/* fake USB PCI slot */ ++#define USB_HOST_SLOT 9 ++#define USB_BAR0_MEM_SIZE 0x0800 ++ ++#define BCM_HOST_MEM_SPACE1 0x10000000 ++#define BCM_HOST_MEM_SPACE2 0x00000000 ++ ++/* ++ * EBI bus clock is 33MHz and share with PCI bus ++ * each clock cycle is 30ns. ++ */ ++/* attribute memory access wait cnt for 4306 */ ++#define PCMCIA_ATTR_CE_HOLD 3 // data hold time 70ns ++#define PCMCIA_ATTR_CE_SETUP 3 // data setup time 50ns ++#define PCMCIA_ATTR_INACTIVE 6 // time between read/write cycles 180ns. For the total cycle time 600ns (cnt1+cnt2+cnt3+cnt4) ++#define PCMCIA_ATTR_ACTIVE 10 // OE/WE pulse width 300ns ++ ++/* common memory access wait cnt for 4306 */ ++#define PCMCIA_MEM_CE_HOLD 1 // data hold time 30ns ++#define PCMCIA_MEM_CE_SETUP 1 // data setup time 30ns ++#define PCMCIA_MEM_INACTIVE 2 // time between read/write cycles 40ns. For the total cycle time 250ns (cnt1+cnt2+cnt3+cnt4) ++#define PCMCIA_MEM_ACTIVE 5 // OE/WE pulse width 150ns ++ ++#define PCCARD_VCC_MASK 0x00070000 // Mask Reset also ++#define PCCARD_VCC_33V 0x00010000 ++#define PCCARD_VCC_50V 0x00020000 ++ ++typedef enum { ++ MPI_CARDTYPE_NONE, // No Card in slot ++ MPI_CARDTYPE_PCMCIA, // 16-bit PCMCIA card in slot ++ MPI_CARDTYPE_CARDBUS, // 32-bit CardBus card in slot ++} CardType; ++ ++#define CARDBUS_SLOT 0 // Slot 0 is default for CardBus ++ ++#define pcmciaAttrOffset 0x00200000 ++#define pcmciaMemOffset 0x00000000 ++// Needs to be right above PCI I/O space. Give 0x8000 (32K) to PCMCIA. ++#define pcmciaIoOffset (BCM_PCI_IO_BASE + 0x80000) ++// Base Address is that mapped into the MPI ChipSelect registers. ++// UBUS bridge MemoryWindow 0 outputs a 0x00 for the base. ++#define pcmciaBase 0xbf000000 ++#define pcmciaAttr (pcmciaAttrOffset | pcmciaBase) ++#define pcmciaMem (pcmciaMemOffset | pcmciaBase) ++#define pcmciaIo (pcmciaIoOffset | pcmciaBase) ++ ++#endif +diff -urN linux.old/arch/mips/bcm963xx/include/bcmTag.h linux.dev/arch/mips/bcm963xx/include/bcmTag.h +--- linux.old/arch/mips/bcm963xx/include/bcmTag.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/include/bcmTag.h 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,153 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++//************************************************************************************** ++// File Name : bcmTag.h ++// ++// Description: add tag with validation system to the firmware image file to be uploaded ++// via http ++// ++// Created : 02/28/2002 seanl ++//************************************************************************************** ++ ++#ifndef _BCMTAG_H_ ++#define _BCMTAG_H_ ++ ++ ++#define BCM_SIG_1 "Broadcom Corporation" ++#define BCM_SIG_2 "ver. 2.0" // was "firmware version 2.0" now it is split 6 char out for chip id. ++ ++#define BCM_TAG_VER "6" ++#define BCM_TAG_VER_LAST "26" ++ ++// file tag (head) structure all is in clear text except validationTokens (crc, md5, sha1, etc). Total: 128 unsigned chars ++#define TAG_LEN 256 ++#define TAG_VER_LEN 4 ++#define SIG_LEN 20 ++#define SIG_LEN_2 14 // Original second SIG = 20 is now devided into 14 for SIG_LEN_2 and 6 for CHIP_ID ++#define CHIP_ID_LEN 6 ++#define IMAGE_LEN 10 ++#define ADDRESS_LEN 12 ++#define FLAG_LEN 2 ++#define TOKEN_LEN 20 ++#define BOARD_ID_LEN 16 ++#define RESERVED_LEN (TAG_LEN - TAG_VER_LEN - SIG_LEN - SIG_LEN_2 - CHIP_ID_LEN - BOARD_ID_LEN - \ ++ (4*IMAGE_LEN) - (3*ADDRESS_LEN) - (3*FLAG_LEN) - (2*TOKEN_LEN)) ++ ++ ++// TAG for downloadable image (kernel plus file system) ++typedef struct _FILE_TAG ++{ ++ unsigned char tagVersion[TAG_VER_LEN]; // tag version. Will be 2 here. ++ unsigned char signiture_1[SIG_LEN]; // text line for company info ++ unsigned char signiture_2[SIG_LEN_2]; // additional info (can be version number) ++ unsigned char chipId[CHIP_ID_LEN]; // chip id ++ unsigned char boardId[BOARD_ID_LEN]; // board id ++ unsigned char bigEndian[FLAG_LEN]; // if = 1 - big, = 0 - little endia of the host ++ unsigned char totalImageLen[IMAGE_LEN]; // the sum of all the following length ++ unsigned char cfeAddress[ADDRESS_LEN]; // if non zero, cfe starting address ++ unsigned char cfeLen[IMAGE_LEN]; // if non zero, cfe size in clear ASCII text. ++ unsigned char rootfsAddress[ADDRESS_LEN]; // if non zero, filesystem starting address ++ unsigned char rootfsLen[IMAGE_LEN]; // if non zero, filesystem size in clear ASCII text. ++ unsigned char kernelAddress[ADDRESS_LEN]; // if non zero, kernel starting address ++ unsigned char kernelLen[IMAGE_LEN]; // if non zero, kernel size in clear ASCII text. ++ unsigned char dualImage[FLAG_LEN]; // if 1, dual image ++ unsigned char inactiveLen[FLAG_LEN]; // if 1, the image is INACTIVE; if 0, active ++ unsigned char reserved[RESERVED_LEN]; // reserved for later use ++ unsigned char imageValidationToken[TOKEN_LEN];// image validation token - can be crc, md5, sha; for ++ // now will be 4 unsigned char crc ++ unsigned char tagValidationToken[TOKEN_LEN]; // validation token for tag(from signiture_1 to end of // mageValidationToken) ++} FILE_TAG, *PFILE_TAG; ++ ++#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */ ++#define CRC_LEN 4 ++ ++// only included if for bcmTag.exe program ++#ifdef BCMTAG_EXE_USE ++ ++static unsigned long Crc32_table[256] = { ++ 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA, ++ 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3, ++ 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988, ++ 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91, ++ 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE, ++ 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7, ++ 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC, ++ 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5, ++ 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172, ++ 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B, ++ 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940, ++ 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59, ++ 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116, ++ 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F, ++ 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924, ++ 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D, ++ 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A, ++ 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433, ++ 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818, ++ 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01, ++ 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E, ++ 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457, ++ 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C, ++ 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65, ++ 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2, ++ 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB, ++ 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0, ++ 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9, ++ 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086, ++ 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F, ++ 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4, ++ 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD, ++ 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A, ++ 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683, ++ 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8, ++ 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1, ++ 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE, ++ 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7, ++ 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC, ++ 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5, ++ 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252, ++ 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B, ++ 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60, ++ 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79, ++ 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236, ++ 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F, ++ 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04, ++ 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D, ++ 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A, ++ 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713, ++ 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38, ++ 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21, ++ 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E, ++ 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777, ++ 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C, ++ 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45, ++ 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2, ++ 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB, ++ 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0, ++ 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9, ++ 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6, ++ 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF, ++ 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94, ++ 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D ++}; ++#endif // BCMTAG_USE ++ ++ ++#endif // _BCMTAG_H_ ++ +diff -urN linux.old/arch/mips/bcm963xx/include/bcmtypes.h linux.dev/arch/mips/bcm963xx/include/bcmtypes.h +--- linux.old/arch/mips/bcm963xx/include/bcmtypes.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/include/bcmtypes.h 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,163 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++ ++// ++// bcmtypes.h - misc useful typedefs ++// ++#ifndef BCMTYPES_H ++#define BCMTYPES_H ++ ++// These are also defined in typedefs.h in the application area, so I need to ++// protect against re-definition. ++ ++#ifndef _TYPEDEFS_H_ ++typedef unsigned char uint8; ++typedef unsigned short uint16; ++typedef unsigned long uint32; ++typedef signed char int8; ++typedef signed short int16; ++typedef signed long int32; ++#if !defined(__cplusplus) ++typedef int bool; ++#endif ++#endif ++ ++typedef unsigned char byte; ++// typedef unsigned long sem_t; ++ ++typedef unsigned long HANDLE,*PULONG,DWORD,*PDWORD; ++typedef signed long LONG,*PLONG; ++ ++typedef unsigned int *PUINT; ++typedef signed int INT; ++ ++typedef unsigned short *PUSHORT; ++typedef signed short SHORT,*PSHORT; ++typedef unsigned short WORD,*PWORD; ++ ++typedef unsigned char *PUCHAR; ++typedef signed char *PCHAR; ++ ++typedef void *PVOID; ++ ++typedef unsigned char BOOLEAN, *PBOOL, *PBOOLEAN; ++ ++typedef unsigned char BYTE,*PBYTE; ++ ++//#ifndef __GNUC__ ++//The following has been defined in Vxworks internally: vxTypesOld.h ++//redefine under vxworks will cause error ++typedef signed int *PINT; ++ ++typedef signed char INT8; ++typedef signed short INT16; ++typedef signed long INT32; ++ ++typedef unsigned char UINT8; ++typedef unsigned short UINT16; ++typedef unsigned long UINT32; ++ ++typedef unsigned char UCHAR; ++typedef unsigned short USHORT; ++typedef unsigned int UINT; ++typedef unsigned long ULONG; ++ ++typedef void VOID; ++typedef unsigned char BOOL; ++ ++//#endif /* __GNUC__ */ ++ ++ ++// These are also defined in typedefs.h in the application area, so I need to ++// protect against re-definition. ++#ifndef TYPEDEFS_H ++ ++// Maximum and minimum values for a signed 16 bit integer. ++#define MAX_INT16 32767 ++#define MIN_INT16 -32768 ++ ++// Useful for true/false return values. This uses the ++// Taligent notation (k for constant). ++typedef enum ++{ ++ kFalse = 0, ++ kTrue = 1 ++} Bool; ++ ++#endif ++ ++/* macros to protect against unaligned accesses */ ++ ++#if 0 ++/* first arg is an address, second is a value */ ++#define PUT16( a, d ) { \ ++ *((byte *)a) = (byte)((d)>>8); \ ++ *(((byte *)a)+1) = (byte)(d); \ ++} ++ ++#define PUT32( a, d ) { \ ++ *((byte *)a) = (byte)((d)>>24); \ ++ *(((byte *)a)+1) = (byte)((d)>>16); \ ++ *(((byte *)a)+2) = (byte)((d)>>8); \ ++ *(((byte *)a)+3) = (byte)(d); \ ++} ++ ++/* first arg is an address, returns a value */ ++#define GET16( a ) ( \ ++ (*((byte *)a) << 8) | \ ++ (*(((byte *)a)+1)) \ ++) ++ ++#define GET32( a ) ( \ ++ (*((byte *)a) << 24) | \ ++ (*(((byte *)a)+1) << 16) | \ ++ (*(((byte *)a)+2) << 8) | \ ++ (*(((byte *)a)+3)) \ ++) ++#endif ++ ++#ifndef YES ++#define YES 1 ++#endif ++ ++#ifndef NO ++#define NO 0 ++#endif ++ ++#ifndef IN ++#define IN ++#endif ++ ++#ifndef OUT ++#define OUT ++#endif ++ ++#ifndef TRUE ++#define TRUE 1 ++#endif ++ ++#ifndef FALSE ++#define FALSE 0 ++#endif ++ ++#define READ32(addr) (*(volatile UINT32 *)((ULONG)&addr)) ++#define READ16(addr) (*(volatile UINT16 *)((ULONG)&addr)) ++#define READ8(addr) (*(volatile UINT8 *)((ULONG)&addr)) ++ ++#endif +diff -urN linux.old/arch/mips/bcm963xx/include/board.h linux.dev/arch/mips/bcm963xx/include/board.h +--- linux.old/arch/mips/bcm963xx/include/board.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/include/board.h 2006-08-25 01:52:34.000000000 +0200 +@@ -0,0 +1,373 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++/***********************************************************************/ ++/* */ ++/* MODULE: board.h */ ++/* DATE: 97/02/18 */ ++/* PURPOSE: Board specific information. This module should include */ ++/* all base device addresses and board specific macros. */ ++/* */ ++/***********************************************************************/ ++#ifndef _BOARD_H ++#define _BOARD_H ++ ++/*****************************************************************************/ ++/* Misc board definitions */ ++/*****************************************************************************/ ++ ++#define DYING_GASP_API ++ ++/*****************************************************************************/ ++/* Physical Memory Map */ ++/*****************************************************************************/ ++ ++#define PHYS_DRAM_BASE 0x00000000 /* Dynamic RAM Base */ ++#define PHYS_FLASH_BASE 0x1FC00000 /* Flash Memory */ ++ ++/*****************************************************************************/ ++/* Note that the addresses above are physical addresses and that programs */ ++/* have to use converted addresses defined below: */ ++/*****************************************************************************/ ++#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */ ++#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */ ++#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */ ++ ++/*****************************************************************************/ ++/* Select the PLL value to get the desired CPU clock frequency. */ ++/* */ ++/* */ ++/*****************************************************************************/ ++#define FPERIPH 50000000 ++ ++#define ONEK 1024 ++#define BLK64K (64*ONEK) ++#define FLASH45_BLKS_BOOT_ROM 1 ++#define FLASH45_LENGTH_BOOT_ROM (FLASH45_BLKS_BOOT_ROM * BLK64K) ++#define FLASH_RESERVED_AT_END (64*ONEK) /*reserved for PSI, scratch pad*/ ++ ++/*****************************************************************************/ ++/* Note that the addresses above are physical addresses and that programs */ ++/* have to use converted addresses defined below: */ ++/*****************************************************************************/ ++#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */ ++#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */ ++#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */ ++ ++/*****************************************************************************/ ++/* Select the PLL value to get the desired CPU clock frequency. */ ++/* */ ++/* */ ++/*****************************************************************************/ ++#define FPERIPH 50000000 ++ ++#define SDRAM_TYPE_ADDRESS_OFFSET 16 ++#define NVRAM_DATA_OFFSET 0x0580 ++#define NVRAM_DATA_ID 0x0f1e2d3c ++#define BOARD_SDRAM_TYPE *(unsigned long *) \ ++ (FLASH_BASE + SDRAM_TYPE_ADDRESS_OFFSET) ++ ++#define ONEK 1024 ++#define BLK64K (64*ONEK) ++ ++// nvram and psi flash definitions for 45 ++#define FLASH45_LENGTH_NVRAM ONEK // 1k nvram ++#define NVRAM_PSI_DEFAULT 24 // default psi in K byes ++ ++/*****************************************************************************/ ++/* NVRAM Offset and definition */ ++/*****************************************************************************/ ++ ++#define NVRAM_VERSION_NUMBER 2 ++#define NVRAM_VERSION_NUMBER_ADDRESS 0 ++ ++#define NVRAM_BOOTLINE_LEN 256 ++#define NVRAM_BOARD_ID_STRING_LEN 16 ++#define NVRAM_MAC_ADDRESS_LEN 6 ++#define NVRAM_MAC_COUNT_MAX 32 ++ ++/*****************************************************************************/ ++/* Misc Offsets */ ++/*****************************************************************************/ ++ ++#define CFE_VERSION_OFFSET 0x0570 ++#define CFE_VERSION_MARK_SIZE 5 ++#define CFE_VERSION_SIZE 5 ++ ++typedef struct ++{ ++ unsigned long ulVersion; ++ char szBootline[NVRAM_BOOTLINE_LEN]; ++ char szBoardId[NVRAM_BOARD_ID_STRING_LEN]; ++ unsigned long ulReserved1[2]; ++ unsigned long ulNumMacAddrs; ++ unsigned char ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN]; ++ char chReserved[2]; ++ unsigned long ulCheckSum; ++} NVRAM_DATA, *PNVRAM_DATA; ++ ++ ++/*****************************************************************************/ ++/* board ioctl calls for flash, led and some other utilities */ ++/*****************************************************************************/ ++ ++ ++/* Defines. for board driver */ ++#define BOARD_IOCTL_MAGIC 'B' ++#define BOARD_DRV_MAJOR 206 ++ ++#define MAC_ADDRESS_ANY (unsigned long) -1 ++ ++#define BOARD_IOCTL_FLASH_INIT \ ++ _IOWR(BOARD_IOCTL_MAGIC, 0, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_FLASH_WRITE \ ++ _IOWR(BOARD_IOCTL_MAGIC, 1, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_FLASH_READ \ ++ _IOWR(BOARD_IOCTL_MAGIC, 2, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_NR_PAGES \ ++ _IOWR(BOARD_IOCTL_MAGIC, 3, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_DUMP_ADDR \ ++ _IOWR(BOARD_IOCTL_MAGIC, 4, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_SET_MEMORY \ ++ _IOWR(BOARD_IOCTL_MAGIC, 5, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_MIPS_SOFT_RESET \ ++ _IOWR(BOARD_IOCTL_MAGIC, 6, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_LED_CTRL \ ++ _IOWR(BOARD_IOCTL_MAGIC, 7, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_ID \ ++ _IOWR(BOARD_IOCTL_MAGIC, 8, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_MAC_ADDRESS \ ++ _IOWR(BOARD_IOCTL_MAGIC, 9, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_RELEASE_MAC_ADDRESS \ ++ _IOWR(BOARD_IOCTL_MAGIC, 10, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_PSI_SIZE \ ++ _IOWR(BOARD_IOCTL_MAGIC, 11, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_SDRAM_SIZE \ ++ _IOWR(BOARD_IOCTL_MAGIC, 12, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_SET_MONITOR_FD \ ++ _IOWR(BOARD_IOCTL_MAGIC, 13, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_WAKEUP_MONITOR_TASK \ ++ _IOWR(BOARD_IOCTL_MAGIC, 14, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_BOOTLINE \ ++ _IOWR(BOARD_IOCTL_MAGIC, 15, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_SET_BOOTLINE \ ++ _IOWR(BOARD_IOCTL_MAGIC, 16, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_BASE_MAC_ADDRESS \ ++ _IOWR(BOARD_IOCTL_MAGIC, 17, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_CHIP_ID \ ++ _IOWR(BOARD_IOCTL_MAGIC, 18, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_NUM_ENET \ ++ _IOWR(BOARD_IOCTL_MAGIC, 19, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_CFE_VER \ ++ _IOWR(BOARD_IOCTL_MAGIC, 20, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_ENET_CFG \ ++ _IOWR(BOARD_IOCTL_MAGIC, 21, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_WLAN_ANT_INUSE \ ++ _IOWR(BOARD_IOCTL_MAGIC, 22, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_SET_TRIGGER_EVENT \ ++ _IOWR(BOARD_IOCTL_MAGIC, 23, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_GET_TRIGGER_EVENT \ ++ _IOWR(BOARD_IOCTL_MAGIC, 24, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_UNSET_TRIGGER_EVENT \ ++ _IOWR(BOARD_IOCTL_MAGIC, 25, BOARD_IOCTL_PARMS) ++ ++#define BOARD_IOCTL_SET_SES_LED \ ++ _IOWR(BOARD_IOCTL_MAGIC, 26, BOARD_IOCTL_PARMS) ++ ++//<>JUNHON, 2004/09/15 ++ ++// for the action in BOARD_IOCTL_PARMS for flash operation ++typedef enum ++{ ++ PERSISTENT, ++ NVRAM, ++ BCM_IMAGE_CFE, ++ BCM_IMAGE_FS, ++ BCM_IMAGE_KERNEL, ++ BCM_IMAGE_WHOLE, ++ SCRATCH_PAD, ++ FLASH_SIZE, ++} BOARD_IOCTL_ACTION; ++ ++ ++typedef struct boardIoctParms ++{ ++ char *string; ++ char *buf; ++ int strLen; ++ int offset; ++ BOARD_IOCTL_ACTION action; /* flash read/write: nvram, persistent, bcm image */ ++ int result; ++} BOARD_IOCTL_PARMS; ++ ++ ++// LED defines ++typedef enum ++{ ++ kLedAdsl, ++ kLedWireless, ++ kLedUsb, ++ kLedHpna, ++ kLedWanData, ++ kLedPPP, ++ kLedVoip, ++ kLedSes, ++ kLedLan, ++ kLedSelfTest, ++ kLedEnd, // NOTE: Insert the new led name before this one. Alway stay at the end. ++} BOARD_LED_NAME; ++ ++typedef enum ++{ ++ kLedStateOff, /* turn led off */ ++ kLedStateOn, /* turn led on */ ++ kLedStateFail, /* turn led on red */ ++ kLedStateBlinkOnce, /* blink once, ~100ms and ignore the same call during the 100ms period */ ++ kLedStateSlowBlinkContinues, /* slow blink continues at ~600ms interval */ ++ kLedStateFastBlinkContinues, /* fast blink continues at ~200ms interval */ ++} BOARD_LED_STATE; ++ ++ ++// virtual and physical map pair defined in board.c ++typedef struct ledmappair ++{ ++ BOARD_LED_NAME ledName; // virtual led name ++ BOARD_LED_STATE ledInitState; // initial led state when the board boots. ++ unsigned short ledMask; // physical GPIO pin mask ++ unsigned short ledActiveLow; // reset bit to turn on LED ++ unsigned short ledMaskFail; // physical GPIO pin mask for state failure ++ unsigned short ledActiveLowFail;// reset bit to turn on LED ++} LED_MAP_PAIR, *PLED_MAP_PAIR; ++ ++typedef void (*HANDLE_LED_FUNC)(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState); ++ ++/* Flash storage address information that is determined by the flash driver. */ ++typedef struct flashaddrinfo ++{ ++ int flash_persistent_start_blk; ++ int flash_persistent_number_blk; ++ int flash_persistent_length; ++ unsigned long flash_persistent_blk_offset; ++ int flash_scratch_pad_start_blk; // start before psi (SP_BUF_LEN) ++ int flash_scratch_pad_number_blk; ++ int flash_scratch_pad_length; ++ unsigned long flash_scratch_pad_blk_offset; ++ int flash_nvram_start_blk; ++ int flash_nvram_number_blk; ++ int flash_nvram_length; ++ unsigned long flash_nvram_blk_offset; ++} FLASH_ADDR_INFO, *PFLASH_ADDR_INFO; ++ ++// scratch pad defines ++/* SP - Persisten Scratch Pad format: ++ sp header : 32 bytes ++ tokenId-1 : 8 bytes ++ tokenId-1 len : 4 bytes ++ tokenId-1 data ++ .... ++ tokenId-n : 8 bytes ++ tokenId-n len : 4 bytes ++ tokenId-n data ++*/ ++ ++#define MAGIC_NUM_LEN 8 ++#define MAGIC_NUMBER "gOGoBrCm" ++#define TOKEN_NAME_LEN 16 ++#define SP_VERSION 1 ++#define SP_MAX_LEN 8 * 1024 // 8k buf before psi ++#define SP_RESERVERD 16 ++ ++typedef struct _SP_HEADER ++{ ++ char SPMagicNum[MAGIC_NUM_LEN]; // 8 bytes of magic number ++ int SPVersion; // version number ++ int SPUsedLen; // used sp len ++ char SPReserved[SP_RESERVERD]; // reservied, total 32 bytes ++} SP_HEADER, *PSP_HEADER; ++ ++typedef struct _TOKEN_DEF ++{ ++ char tokenName[TOKEN_NAME_LEN]; ++ int tokenLen; ++} SP_TOKEN, *PSP_TOKEN; ++ ++ ++/*****************************************************************************/ ++/* Function Prototypes */ ++/*****************************************************************************/ ++#if !defined(__ASM_ASM_H) ++void dumpaddr( unsigned char *pAddr, int nLen ); ++ ++int kerSysNvRamGet(char *string, int strLen, int offset); ++int kerSysNvRamSet(char *string, int strLen, int offset); ++int kerSysPersistentGet(char *string, int strLen, int offset); ++int kerSysPersistentSet(char *string, int strLen, int offset); ++int kerSysScratchPadGet(char *tokName, char *tokBuf, int tokLen); ++int kerSysScratchPadSet(char *tokName, char *tokBuf, int tokLen); ++int kerSysBcmImageSet( int flash_start_addr, char *string, int size); ++int kerSysGetMacAddress( unsigned char *pucaAddr, unsigned long ulId ); ++int kerSysReleaseMacAddress( unsigned char *pucaAddr ); ++int kerSysGetSdramSize( void ); ++void kerSysGetBootline(char *string, int strLen); ++void kerSysSetBootline(char *string, int strLen); ++void kerSysMipsSoftReset(void); ++void kerSysLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE); ++void kerSysLedRegisterHwHandler( BOARD_LED_NAME, HANDLE_LED_FUNC, int ); ++int kerSysFlashSizeGet(void); ++void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context); ++void kerSysDeregisterDyingGaspHandler(char *devname); ++void kerSysWakeupMonitorTask( void ); ++#endif ++ ++#define BOOT_CFE 0 ++#define BOOT_REDBOOT 1 ++ ++extern int boot_loader_type; ++ ++#endif /* _BOARD_H */ ++ +diff -urN linux.old/arch/mips/bcm963xx/int-handler.S linux.dev/arch/mips/bcm963xx/int-handler.S +--- linux.old/arch/mips/bcm963xx/int-handler.S 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/int-handler.S 2006-08-25 02:13:33.000000000 +0200 +@@ -0,0 +1,59 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++/* ++ * Generic interrupt handler for Broadcom MIPS boards ++ */ ++ ++#include ++ ++#include ++#include ++#include ++#include ++ ++/* ++ * MIPS IRQ Source ++ * -------- ------ ++ * 0 Software (ignored) ++ * 1 Software (ignored) ++ * 2 Combined hardware interrupt (hw0) ++ * 3 Hardware ++ * 4 Hardware ++ * 5 Hardware ++ * 6 Hardware ++ * 7 R4k timer ++ */ ++ ++ .text ++ .set noreorder ++ .set noat ++ .align 5 ++ NESTED(brcmIRQ, PT_SIZE, sp) ++ SAVE_ALL ++ CLI ++ .set noreorder ++ .set at ++ ++ jal plat_irq_dispatch ++ move a0, sp ++ ++ j ret_from_irq ++ nop ++ ++ END(brcmIRQ) +diff -urN linux.old/arch/mips/bcm963xx/irq.c linux.dev/arch/mips/bcm963xx/irq.c +--- linux.old/arch/mips/bcm963xx/irq.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/irq.c 2006-08-25 03:54:34.000000000 +0200 +@@ -0,0 +1,256 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++/* ++ * Interrupt control functions for Broadcom 963xx MIPS boards ++ */ ++ ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++static void irq_dispatch_int(struct pt_regs *regs) ++{ ++ unsigned int pendingIrqs; ++ static unsigned int irqBit; ++ static unsigned int isrNumber = 31; ++ ++ pendingIrqs = PERF->IrqStatus & PERF->IrqMask; ++ if (!pendingIrqs) { ++ return; ++ } ++ ++ while (1) { ++ irqBit <<= 1; ++ isrNumber++; ++ if (isrNumber == 32) { ++ isrNumber = 0; ++ irqBit = 0x1; ++ } ++ if (pendingIrqs & irqBit) { ++ PERF->IrqMask &= ~irqBit; // mask ++ do_IRQ(isrNumber + INTERNAL_ISR_TABLE_OFFSET, regs); ++ break; ++ } ++ } ++} ++ ++static void irq_dispatch_ext(uint32 irq, struct pt_regs *regs) ++{ ++ if (!(PERF->ExtIrqCfg & (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)))) { ++ printk("**** Ext IRQ mask. Should not dispatch ****\n"); ++ } ++ /* disable and clear interrupt in the controller */ ++ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT)); ++ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); ++ do_IRQ(irq, regs); ++} ++ ++ ++extern void brcm_timer_interrupt(struct pt_regs *regs); ++ ++asmlinkage void plat_irq_dispatch(struct pt_regs *regs) ++{ ++ u32 cause; ++ while((cause = (read_c0_cause()& CAUSEF_IP))) { ++ if (cause & CAUSEF_IP7) ++ brcm_timer_interrupt(regs); ++ else if (cause & CAUSEF_IP2) ++ irq_dispatch_int(regs); ++ else if (cause & CAUSEF_IP3) ++ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_0, regs); ++ else if (cause & CAUSEF_IP4) ++ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_1, regs); ++ else if (cause & CAUSEF_IP5) ++ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_2, regs); ++ else if (cause & CAUSEF_IP6) ++ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_3, regs); ++ local_irq_disable(); ++ } ++} ++ ++ ++void enable_brcm_irq(unsigned int irq) ++{ ++ unsigned long flags; ++ ++ local_irq_save(flags); ++ if( irq >= INTERNAL_ISR_TABLE_OFFSET ) { ++ PERF->IrqMask |= (1 << (irq - INTERNAL_ISR_TABLE_OFFSET)); ++ } ++ else if (irq >= INTERRUPT_ID_EXTERNAL_0 && irq <= INTERRUPT_ID_EXTERNAL_3) { ++ /* enable and clear interrupt in the controller */ ++ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT)); ++ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); ++ } ++ local_irq_restore(flags); ++} ++ ++void disable_brcm_irq(unsigned int irq) ++{ ++ unsigned long flags; ++ ++ local_irq_save(flags); ++ if( irq >= INTERNAL_ISR_TABLE_OFFSET ) { ++ PERF->IrqMask &= ~(1 << (irq - INTERNAL_ISR_TABLE_OFFSET)); ++ } ++ else if (irq >= INTERRUPT_ID_EXTERNAL_0 && irq <= INTERRUPT_ID_EXTERNAL_3) { ++ /* disable interrupt in the controller */ ++ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); ++ } ++ local_irq_restore(flags); ++} ++ ++void ack_brcm_irq(unsigned int irq) ++{ ++ /* Already done in brcm_irq_dispatch */ ++} ++ ++unsigned int startup_brcm_irq(unsigned int irq) ++{ ++ enable_brcm_irq(irq); ++ ++ return 0; /* never anything pending */ ++} ++ ++unsigned int startup_brcm_none(unsigned int irq) ++{ ++ return 0; ++} ++ ++void end_brcm_irq(unsigned int irq) ++{ ++ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) ++ enable_brcm_irq(irq); ++} ++ ++void end_brcm_none(unsigned int irq) ++{ ++} ++ ++static struct hw_interrupt_type brcm_irq_type = { ++ .typename = "MIPS", ++ .startup = startup_brcm_irq, ++ .shutdown = disable_brcm_irq, ++ .enable = enable_brcm_irq, ++ .disable = disable_brcm_irq, ++ .ack = ack_brcm_irq, ++ .end = end_brcm_irq, ++ .set_affinity = NULL ++}; ++ ++static struct hw_interrupt_type brcm_irq_no_end_type = { ++ .typename = "MIPS", ++ .startup = startup_brcm_none, ++ .shutdown = disable_brcm_irq, ++ .enable = enable_brcm_irq, ++ .disable = disable_brcm_irq, ++ .ack = ack_brcm_irq, ++ .end = end_brcm_none, ++ .set_affinity = NULL ++}; ++ ++void __init arch_init_irq(void) ++{ ++ int i; ++ ++ clear_c0_status(ST0_BEV); ++ change_c0_status(ST0_IM, (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4)); ++ ++ for (i = 0; i < NR_IRQS; i++) { ++ irq_desc[i].status = IRQ_DISABLED; ++ irq_desc[i].action = 0; ++ irq_desc[i].depth = 1; ++ irq_desc[i].handler = &brcm_irq_type; ++ } ++} ++ ++int request_external_irq(unsigned int irq, ++ FN_HANDLER handler, ++ unsigned long irqflags, ++ const char * devname, ++ void *dev_id) ++{ ++ unsigned long flags; ++ ++ local_irq_save(flags); ++ ++ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT)); // Clear ++ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); // Mask ++ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_INSENS_SHFT)); // Edge insesnsitive ++ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_LEVEL_SHFT)); // Level triggered ++ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_SENSE_SHFT)); // Low level ++ ++ local_irq_restore(flags); ++ ++ return( request_irq(irq, handler, irqflags, devname, dev_id) ); ++} ++ ++/* VxWorks compatibility function(s). */ ++ ++unsigned int BcmHalMapInterrupt(FN_HANDLER pfunc, unsigned int param, ++ unsigned int interruptId) ++{ ++ int nRet = -1; ++ char *devname; ++ ++ devname = kmalloc(16, GFP_KERNEL); ++ if (devname) ++ sprintf( devname, "brcm_%d", interruptId ); ++ ++ /* Set the IRQ description to not automatically enable the interrupt at ++ * the end of an ISR. The driver that handles the interrupt must ++ * explicitly call BcmHalInterruptEnable or enable_brcm_irq. This behavior ++ * is consistent with interrupt handling on VxWorks. ++ */ ++ irq_desc[interruptId].handler = &brcm_irq_no_end_type; ++ ++ if( interruptId >= INTERNAL_ISR_TABLE_OFFSET ) ++ { ++ nRet = request_irq( interruptId, pfunc, SA_SAMPLE_RANDOM | SA_INTERRUPT, ++ devname, (void *) param ); ++ } ++ else if (interruptId >= INTERRUPT_ID_EXTERNAL_0 && interruptId <= INTERRUPT_ID_EXTERNAL_3) ++ { ++ nRet = request_external_irq( interruptId, pfunc, SA_SAMPLE_RANDOM | SA_INTERRUPT, ++ devname, (void *) param ); ++ } ++ ++ return( nRet ); ++} ++ ++ ++EXPORT_SYMBOL(enable_brcm_irq); ++EXPORT_SYMBOL(disable_brcm_irq); ++EXPORT_SYMBOL(request_external_irq); ++EXPORT_SYMBOL(BcmHalMapInterrupt); ++ +diff -urN linux.old/arch/mips/bcm963xx/Kconfig linux.dev/arch/mips/bcm963xx/Kconfig +--- linux.old/arch/mips/bcm963xx/Kconfig 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/Kconfig 2006-08-25 01:22:39.000000000 +0200 +@@ -0,0 +1,138 @@ ++# Kernel and Driver configuration for Broadcom Commengine ADSL board ++choice ++ prompt "Broadcom Commengine ADSL board" ++ depends on MIPS_BRCM ++ default BCM96345 ++ help ++ Select different Broadcom ADSL board ++ ++config BCM96338 ++ bool "96338 ADSL board" ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ ++config BCM96345 ++ bool "96345 ADSL board" ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ ++config BCM96348 ++ bool "96348 ADSL board" ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ ++endchoice ++ ++config BCM_BOARD ++ bool "Support for Broadcom Board" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_SERIAL ++ bool "Support for Serial Port" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_ENET ++ tristate "Support for Ethernet" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_USB ++ tristate "Support for USB" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_WLAN ++ tristate "Support for Wireless" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_PCI ++ bool "Support for PCI" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ select PCI ++ ++config BCM_ATMAPI ++ tristate "Support for ATM" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_ATMTEST ++ tristate "Support for ATM Diagnostic" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_ADSL ++ tristate "Support for ADSL" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_ENDPOINT ++ tristate "Support for VOICE" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_PROCFS ++ tristate "Support for PROCFS" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_VDSL ++ tristate "Support for VDSL" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_SECURITY ++ tristate "Support for SECURITY" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_HPNA ++ tristate "Support for HPNA" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_BOARD_IMPL ++ int "Implementation index for ADSL Board" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_SERIAL_IMPL ++ int "Implementation index for Serial" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_ENET_IMPL ++ int "Implementation index for Ethernet" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_USB_IMPL ++ int "Implementation index for USB" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_WLAN_IMPL ++ int "Implementation index for WIRELESS" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_ATMAPI_IMPL ++ int "Implementation index for ATM" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_ATMTEST_IMPL ++ int "Implementation index for ATM Diagnostic" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_BLAA_IMPL ++ int "Implementation index for BLAA" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_ADSL_IMPL ++ int "Implementation index for ADSL" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_ENDPOINT_IMPL ++ int "Implementation index for VOICE" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_PROCFS_IMPL ++ int "Implementation index for PROCFS" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_VDSL_IMPL ++ int "Implementation index for VDSL" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_SECURITY_IMPL ++ int "Implementation index for SECURITY" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ ++config BCM_HPNA_IMPL ++ int "Implementation index for HPNA" ++ depends on BCM96338 || BCM96345 || BCM96348 ++ +diff -urN linux.old/arch/mips/bcm963xx/Makefile linux.dev/arch/mips/bcm963xx/Makefile +--- linux.old/arch/mips/bcm963xx/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/Makefile 2006-08-25 02:04:27.000000000 +0200 +@@ -0,0 +1,23 @@ ++# ++# Makefile for generic Broadcom MIPS boards ++# ++# Copyright (C) 2004 Broadcom Corporation ++# ++obj-y := irq.o prom.o setup.o time.o ser_init.o bcm63xx_led.o board.o boardparms.o int-handler.o ++ ++SRCBASE := $(TOPDIR) ++EXTRA_CFLAGS += -I$(SRCBASE)/include ++#EXTRA_CFLAGS += -I$(INC_ADSLDRV_PATH) -DDBG ++EXTRA_CFLAGS += -I$(INC_ADSLDRV_PATH) ++ ++ ++ifeq "$(ADSL)" "ANNEX_B" ++EXTRA_CFLAGS += -DADSL_ANNEXB ++endif ++ifeq "$(ADSL)" "SADSL" ++EXTRA_CFLAGS += -DADSL_SADSL ++endif ++ifeq "$(ADSL)" "ANNEX_C" ++EXTRA_CFLAGS += -DADSL_ANNEXC ++endif ++ +diff -urN linux.old/arch/mips/bcm963xx/prom.c linux.dev/arch/mips/bcm963xx/prom.c +--- linux.old/arch/mips/bcm963xx/prom.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/prom.c 2006-08-25 01:49:57.000000000 +0200 +@@ -0,0 +1,128 @@ ++/* ++<:copyright-gpl ++ Copyright 2004 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++/* ++ * prom.c: PROM library initialization code. ++ * ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include "boardparms.h" ++#include "softdsl/AdslCoreDefs.h" ++ ++ ++//char arcs_cmdline[CL_SIZE] __initdata = {0}; ++/* inv_xde */ ++int boot_loader_type; ++ ++extern int do_syslog(int, char *, int); ++extern void serial_init(void); ++extern void __init InitNvramInfo( void ); ++extern void kerSysFlashInit( void ); ++extern unsigned long get_nvram_start_addr(void); ++void __init create_root_nfs_cmdline( char *cmdline ); ++ ++#define MACH_BCM MACH_BCM96348 ++ ++const char *get_system_type(void) ++{ ++ /*PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr(); ++ ++ return( pNvramData->szBoardId );*/ ++ return "brcm63xx"; ++} ++ ++unsigned long getMemorySize(void) ++{ ++ unsigned long ulSdramType = BOARD_SDRAM_TYPE; ++ ++ unsigned long ulSdramSize; ++ ++ switch( ulSdramType ) ++ { ++ case BP_MEMORY_16MB_1_CHIP: ++ case BP_MEMORY_16MB_2_CHIP: ++ ulSdramSize = 16 * 1024 * 1024; ++ break; ++ case BP_MEMORY_32MB_1_CHIP: ++ case BP_MEMORY_32MB_2_CHIP: ++ ulSdramSize = 32 * 1024 * 1024; ++ break; ++ case BP_MEMORY_64MB_2_CHIP: ++ ulSdramSize = 64 * 1024 * 1024; ++ break; ++ default: ++ ulSdramSize = 8 * 1024 * 1024; ++ break; ++ } ++ if (boot_loader_type == BOOT_CFE) ++ return ulSdramSize; ++ else ++ // assume that there is one contiguous memory map ++ return boot_mem_map.map[0].size; ++} ++ ++/* -------------------------------------------------------------------------- ++ Name: prom_init ++ -------------------------------------------------------------------------- */ ++void __init prom_init(void) ++{ ++ extern ulong r4k_interval; ++ ++ serial_init(); ++ ++ /* Need to fixup boot loader detection code ++ * whithout changing prom_init prototype ++ */ ++ ++ do_syslog(8, NULL, 8); ++ ++ printk( "%s prom init\n", get_system_type() ); ++ ++ PERF->IrqMask = 0; ++ ++ arcs_cmdline[0] = '\0'; ++ ++ if (boot_loader_type == BOOT_CFE) ++ add_memory_region(0, (getMemorySize() - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM); ++ else ++ add_memory_region(0, (0x01000000 - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM); ++ ++ mips_machgroup = MACH_GROUP_BRCM; ++ mips_machtype = MACH_BCM; ++} ++ ++/* -------------------------------------------------------------------------- ++ Name: prom_free_prom_memory ++Abstract: ++ -------------------------------------------------------------------------- */ ++void __init prom_free_prom_memory(void) ++{ ++ ++} ++ +diff -urN linux.old/arch/mips/bcm963xx/ser_init.c linux.dev/arch/mips/bcm963xx/ser_init.c +--- linux.old/arch/mips/bcm963xx/ser_init.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/ser_init.c 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,180 @@ ++/* ++<:copyright-gpl ++ Copyright 2004 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++/* ++ * Broadcom bcm63xx serial port initialization, also prepare for printk ++ * by registering with console_init ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#define SER63XX_DEFAULT_BAUD 115200 ++#define BD_BCM63XX_TIMER_CLOCK_INPUT (FPERIPH) ++#define stUart ((volatile Uart * const) UART_BASE) ++ ++// Transmit interrupts ++#define TXINT (TXFIFOEMT | TXUNDERR | TXOVFERR) ++// Receive interrupts ++#define RXINT (RXFIFONE | RXOVFERR) ++ ++/* -------------------------------------------------------------------------- ++ Name: serial_init ++ Purpose: Initalize the UART ++-------------------------------------------------------------------------- */ ++void __init serial_init(void) ++{ ++ UINT32 tmpVal = SER63XX_DEFAULT_BAUD; ++ ULONG clockFreqHz; ++ ++#if defined(CONFIG_BCM96345) ++ // Make sure clock is ticking ++ PERF->blkEnables |= UART_CLK_EN; ++#endif ++ ++ /* Dissable channel's receiver and transmitter. */ ++ stUart->control &= ~(BRGEN|TXEN|RXEN); ++ ++ /*--------------------------------------------------------------------*/ ++ /* Write the table value to the clock select register. */ ++ /* DPullen - this is the equation to use: */ ++ /* value = clockFreqHz / baud / 32-1; */ ++ /* (snmod) Actually you should also take into account any necessary */ ++ /* rounding. Divide by 16, look at lsb, if 0, divide by 2 */ ++ /* and subtract 1. If 1, just divide by 2 */ ++ /*--------------------------------------------------------------------*/ ++ clockFreqHz = BD_BCM63XX_TIMER_CLOCK_INPUT; ++ tmpVal = (clockFreqHz / tmpVal) / 16; ++ if( tmpVal & 0x01 ) ++ tmpVal /= 2; //Rounding up, so sub is already accounted for ++ else ++ tmpVal = (tmpVal / 2) - 1; // Rounding down so we must sub 1 ++ stUart->baudword = tmpVal; ++ ++ /* Finally, re-enable the transmitter and receiver. */ ++ stUart->control |= (BRGEN|TXEN|RXEN); ++ ++ stUart->config = (BITS8SYM | ONESTOP); ++ // Set the FIFO interrupt depth ... stUart->fifocfg = 0xAA; ++ stUart->fifoctl = RSTTXFIFOS | RSTRXFIFOS; ++ stUart->intMask = 0; ++ stUart->intMask = RXINT | TXINT; ++} ++ ++ ++/* prom_putc() ++ * Output a character to the UART ++ */ ++void prom_putc(char c) ++{ ++ /* Wait for Tx uffer to empty */ ++ while (! (READ16(stUart->intStatus) & TXFIFOEMT)); ++ /* Send character */ ++ stUart->Data = c; ++} ++ ++/* prom_puts() ++ * Write a string to the UART ++ */ ++void prom_puts(const char *s) ++{ ++ while (*s) { ++ if (*s == '\n') { ++ prom_putc('\r'); ++ } ++ prom_putc(*s++); ++ } ++} ++ ++ ++/* prom_getc_nowait() ++ * Returns a character from the UART ++ * Returns -1 if no characters available or corrupted ++ */ ++int prom_getc_nowait(void) ++{ ++ uint16 uStatus; ++ int cData = -1; ++ ++ uStatus = READ16(stUart->intStatus); ++ ++ if (uStatus & RXFIFONE) { /* Do we have a character? */ ++ cData = READ16(stUart->Data) & 0xff; /* Read character */ ++ if (uStatus & (RXFRAMERR | RXPARERR)) { /* If we got an error, throw it away */ ++ cData = -1; ++ } ++ } ++ ++ return cData; ++} ++ ++/* prom_getc() ++ * Returns a charcter from the serial port ++ * Will block until it receives a valid character ++*/ ++char prom_getc(void) ++{ ++ int cData = -1; ++ ++ /* Loop until we get a valid character */ ++ while(cData == -1) { ++ cData = prom_getc_nowait(); ++ } ++ return (char) cData; ++} ++ ++/* prom_testc() ++ * Returns 0 if no characters available ++ */ ++int prom_testc(void) ++{ ++ uint16 uStatus; ++ ++ uStatus = READ16(stUart->intStatus); ++ ++ return (uStatus & RXFIFONE); ++} ++ ++#if defined (CONFIG_REMOTE_DEBUG) ++/* Prevent other code from writing to the serial port */ ++void _putc(char c) { } ++void _puts(const char *ptr) { } ++#else ++/* Low level outputs call prom routines */ ++void _putc(char c) { ++ prom_putc(c); ++} ++void _puts(const char *ptr) { ++ prom_puts(ptr); ++} ++#endif +diff -urN linux.old/arch/mips/bcm963xx/setup.c linux.dev/arch/mips/bcm963xx/setup.c +--- linux.old/arch/mips/bcm963xx/setup.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/setup.c 2006-08-25 02:26:58.000000000 +0200 +@@ -0,0 +1,525 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++/* ++ * Generic setup routines for Broadcom 963xx MIPS boards ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++extern void brcm_time_init(void); ++extern void brcm_timer_setup(struct irqaction *irq); ++extern unsigned long getMemorySize(void); ++ ++#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI) ++#include ++#include ++#include ++#include ++ ++static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE); ++#endif ++ ++/* This function should be in a board specific directory. For now, ++ * assume that all boards that include this file use a Broadcom chip ++ * with a soft reset bit in the PLL control register. ++ */ ++static void brcm_machine_restart(char *command) ++{ ++ const unsigned long ulSoftReset = 0x00000001; ++ unsigned long *pulPllCtrl = (unsigned long *) 0xfffe0008; ++ *pulPllCtrl |= ulSoftReset; ++} ++ ++static void brcm_machine_halt(void) ++{ ++ printk("System halted\n"); ++ while (1); ++} ++ ++#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI) ++ ++static void mpi_SetLocalPciConfigReg(uint32 reg, uint32 value) ++{ ++ /* write index then value */ ++ mpi->pcicfgcntrl = PCI_CFG_REG_WRITE_EN + reg;; ++ mpi->pcicfgdata = value; ++} ++ ++static uint32 mpi_GetLocalPciConfigReg(uint32 reg) ++{ ++ /* write index then get value */ ++ mpi->pcicfgcntrl = PCI_CFG_REG_WRITE_EN + reg;; ++ return mpi->pcicfgdata; ++} ++ ++/* ++ * mpi_ResetPcCard: Set/Reset the PcCard ++ */ ++static void mpi_ResetPcCard(int cardtype, BOOL bReset) ++{ ++ if (cardtype == MPI_CARDTYPE_NONE) { ++ return; ++ } ++ ++ if (cardtype == MPI_CARDTYPE_CARDBUS) { ++ bReset = ! bReset; ++ } ++ ++ if (bReset) { ++ mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & ~PCCARD_CARD_RESET); ++ } else { ++ mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 | PCCARD_CARD_RESET); ++ } ++} ++ ++/* ++ * mpi_ConfigCs: Configure an MPI/EBI chip select ++ */ ++static void mpi_ConfigCs(uint32 cs, uint32 base, uint32 size, uint32 flags) ++{ ++ mpi->cs[cs].base = ((base & 0x1FFFFFFF) | size); ++ mpi->cs[cs].config = flags; ++} ++ ++/* ++ * mpi_InitPcmciaSpace ++ */ ++static void mpi_InitPcmciaSpace(void) ++{ ++ // ChipSelect 4 controls PCMCIA Memory accesses ++ mpi_ConfigCs(PCMCIA_COMMON_BASE, pcmciaMem, EBI_SIZE_1M, (EBI_WORD_WIDE|EBI_ENABLE)); ++ // ChipSelect 5 controls PCMCIA Attribute accesses ++ mpi_ConfigCs(PCMCIA_ATTRIBUTE_BASE, pcmciaAttr, EBI_SIZE_1M, (EBI_WORD_WIDE|EBI_ENABLE)); ++ // ChipSelect 6 controls PCMCIA I/O accesses ++ mpi_ConfigCs(PCMCIA_IO_BASE, pcmciaIo, EBI_SIZE_64K, (EBI_WORD_WIDE|EBI_ENABLE)); ++ ++ mpi->pcmcia_cntl2 = ((PCMCIA_ATTR_ACTIVE << RW_ACTIVE_CNT_BIT) | ++ (PCMCIA_ATTR_INACTIVE << INACTIVE_CNT_BIT) | ++ (PCMCIA_ATTR_CE_SETUP << CE_SETUP_CNT_BIT) | ++ (PCMCIA_ATTR_CE_HOLD << CE_HOLD_CNT_BIT)); ++ ++ mpi->pcmcia_cntl2 |= (PCMCIA_HALFWORD_EN | PCMCIA_BYTESWAP_DIS); ++} ++ ++/* ++ * cardtype_vcc_detect: PC Card's card detect and voltage sense connection ++ * ++ * CD1#/ CD2#/ VS1#/ VS2#/ Card Initial Vcc ++ * CCD1# CCD2# CVS1 CVS2 Type ++ * ++ * GND GND open open 16-bit 5 vdc ++ * ++ * GND GND GND open 16-bit 3.3 vdc ++ * ++ * GND GND open GND 16-bit x.x vdc ++ * ++ * GND GND GND GND 16-bit 3.3 & x.x vdc ++ * ++ *==================================================================== ++ * ++ * CVS1 GND CCD1# open CardBus 3.3 vdc ++ * ++ * GND CVS2 open CCD2# CardBus x.x vdc ++ * ++ * GND CVS1 CCD2# open CardBus y.y vdc ++ * ++ * GND CVS2 GND CCD2# CardBus 3.3 & x.x vdc ++ * ++ * CVS2 GND open CCD1# CardBus x.x & y.y vdc ++ * ++ * GND CVS1 CCD2# open CardBus 3.3, x.x & y.y vdc ++ * ++ */ ++static int cardtype_vcc_detect(void) ++{ ++ uint32 data32; ++ int cardtype; ++ ++ cardtype = MPI_CARDTYPE_NONE; ++ mpi->pcmcia_cntl1 = 0x0000A000; // Turn on the output enables and drive ++ // the CVS pins to 0. ++ data32 = mpi->pcmcia_cntl1; ++ switch (data32 & 0x00000003) // Test CD1# and CD2#, see if card is plugged in. ++ { ++ case 0x00000003: // No Card is in the slot. ++ printk("mpi: No Card is in the PCMCIA slot\n"); ++ break; ++ ++ case 0x00000002: // Partial insertion, No CD2#. ++ printk("mpi: Card in the PCMCIA slot partial insertion, no CD2 signal\n"); ++ break; ++ ++ case 0x00000001: // Partial insertion, No CD1#. ++ printk("mpi: Card in the PCMCIA slot partial insertion, no CD1 signal\n"); ++ break; ++ ++ case 0x00000000: ++ mpi->pcmcia_cntl1 = 0x0000A0C0; // Turn off the CVS output enables and ++ // float the CVS pins. ++ mdelay(1); ++ data32 = mpi->pcmcia_cntl1; ++ // Read the Register. ++ switch (data32 & 0x0000000C) // See what is on the CVS pins. ++ { ++ case 0x00000000: // CVS1 and CVS2 are tied to ground, only 1 option. ++ printk("mpi: Detected 3.3 & x.x 16-bit PCMCIA card\n"); ++ cardtype = MPI_CARDTYPE_PCMCIA; ++ break; ++ ++ case 0x00000004: // CVS1 is open or tied to CCD1/CCD2 and CVS2 is tied to ground. ++ // 2 valid voltage options. ++ switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2. ++ { ++ case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins. ++ // This is not a valid combination. ++ printk("mpi: Unknown card plugged into slot\n"); ++ break; ++ ++ case 0x00000002: // CCD2 is tied to either CVS1 or CVS2. ++ mpi->pcmcia_cntl1 = 0x0000A080; // Drive CVS1 to a 0. ++ mdelay(1); ++ data32 = mpi->pcmcia_cntl1; ++ if (data32 & 0x00000002) { // CCD2 is tied to CVS2, not valid. ++ printk("mpi: Unknown card plugged into slot\n"); ++ } else { // CCD2 is tied to CVS1. ++ printk("mpi: Detected 3.3, x.x and y.y Cardbus card\n"); ++ cardtype = MPI_CARDTYPE_CARDBUS; ++ } ++ break; ++ ++ case 0x00000001: // CCD1 is tied to either CVS1 or CVS2. ++ // This is not a valid combination. ++ printk("mpi: Unknown card plugged into slot\n"); ++ break; ++ ++ case 0x00000000: // CCD1 and CCD2 are tied to ground. ++ printk("mpi: Detected x.x vdc 16-bit PCMCIA card\n"); ++ cardtype = MPI_CARDTYPE_PCMCIA; ++ break; ++ } ++ break; ++ ++ case 0x00000008: // CVS2 is open or tied to CCD1/CCD2 and CVS1 is tied to ground. ++ // 2 valid voltage options. ++ switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2. ++ { ++ case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins. ++ // This is not a valid combination. ++ printk("mpi: Unknown card plugged into slot\n"); ++ break; ++ ++ case 0x00000002: // CCD2 is tied to either CVS1 or CVS2. ++ mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0. ++ mdelay(1); ++ data32 = mpi->pcmcia_cntl1; ++ if (data32 & 0x00000002) { // CCD2 is tied to CVS1, not valid. ++ printk("mpi: Unknown card plugged into slot\n"); ++ } else {// CCD2 is tied to CVS2. ++ printk("mpi: Detected 3.3 and x.x Cardbus card\n"); ++ cardtype = MPI_CARDTYPE_CARDBUS; ++ } ++ break; ++ ++ case 0x00000001: // CCD1 is tied to either CVS1 or CVS2. ++ // This is not a valid combination. ++ printk("mpi: Unknown card plugged into slot\n"); ++ break; ++ ++ case 0x00000000: // CCD1 and CCD2 are tied to ground. ++ cardtype = MPI_CARDTYPE_PCMCIA; ++ printk("mpi: Detected 3.3 vdc 16-bit PCMCIA card\n"); ++ break; ++ } ++ break; ++ ++ case 0x0000000C: // CVS1 and CVS2 are open or tied to CCD1/CCD2. ++ // 5 valid voltage options. ++ ++ switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2. ++ { ++ case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins. ++ // This is not a valid combination. ++ printk("mpi: Unknown card plugged into slot\n"); ++ break; ++ ++ case 0x00000002: // CCD2 is tied to either CVS1 or CVS2. ++ // CCD1 is tied to ground. ++ mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0. ++ mdelay(1); ++ data32 = mpi->pcmcia_cntl1; ++ if (data32 & 0x00000002) { // CCD2 is tied to CVS1. ++ printk("mpi: Detected y.y vdc Cardbus card\n"); ++ } else { // CCD2 is tied to CVS2. ++ printk("mpi: Detected x.x vdc Cardbus card\n"); ++ } ++ cardtype = MPI_CARDTYPE_CARDBUS; ++ break; ++ ++ case 0x00000001: // CCD1 is tied to either CVS1 or CVS2. ++ // CCD2 is tied to ground. ++ ++ mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0. ++ mdelay(1); ++ data32 = mpi->pcmcia_cntl1; ++ if (data32 & 0x00000001) {// CCD1 is tied to CVS1. ++ printk("mpi: Detected 3.3 vdc Cardbus card\n"); ++ } else { // CCD1 is tied to CVS2. ++ printk("mpi: Detected x.x and y.y Cardbus card\n"); ++ } ++ cardtype = MPI_CARDTYPE_CARDBUS; ++ break; ++ ++ case 0x00000000: // CCD1 and CCD2 are tied to ground. ++ cardtype = MPI_CARDTYPE_PCMCIA; ++ printk("mpi: Detected 5 vdc 16-bit PCMCIA card\n"); ++ break; ++ } ++ break; ++ ++ default: ++ printk("mpi: Unknown card plugged into slot\n"); ++ break; ++ ++ } ++ } ++ return cardtype; ++} ++ ++/* ++ * mpi_DetectPcCard: Detect the plugged in PC-Card ++ * Return: < 0 => Unknown card detected ++ * 0 => No card detected ++ * 1 => 16-bit card detected ++ * 2 => 32-bit CardBus card detected ++ */ ++static int mpi_DetectPcCard(void) ++{ ++ int cardtype; ++ ++ cardtype = cardtype_vcc_detect(); ++ switch(cardtype) { ++ case MPI_CARDTYPE_PCMCIA: ++ mpi->pcmcia_cntl1 &= ~0x0000e000; // disable enable bits ++ //mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & ~PCCARD_CARD_RESET); ++ mpi->pcmcia_cntl1 |= (PCMCIA_ENABLE | PCMCIA_GPIO_ENABLE); ++ mpi_InitPcmciaSpace(); ++ mpi_ResetPcCard(cardtype, FALSE); ++ // Hold card in reset for 10ms ++ mdelay(10); ++ mpi_ResetPcCard(cardtype, TRUE); ++ // Let card come out of reset ++ mdelay(100); ++ break; ++ case MPI_CARDTYPE_CARDBUS: ++ // 8 => CardBus Enable ++ // 1 => PCI Slot Number ++ // C => Float VS1 & VS2 ++ mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & 0xFFFF0000) | ++ CARDBUS_ENABLE | ++ (CARDBUS_SLOT << 8)| ++ VS2_OEN | ++ VS1_OEN; ++ /* access to this memory window will be to/from CardBus */ ++ mpi->l2pmremap1 |= CARDBUS_MEM; ++ ++ // Need to reset the Cardbus Card. There's no CardManager to do this, ++ // and we need to be ready for PCI configuration. ++ mpi_ResetPcCard(cardtype, FALSE); ++ // Hold card in reset for 10ms ++ mdelay(10); ++ mpi_ResetPcCard(cardtype, TRUE); ++ // Let card come out of reset ++ mdelay(100); ++ break; ++ default: ++ break; ++ } ++ return cardtype; ++} ++ ++static int mpi_init(void) ++{ ++ unsigned long data; ++ unsigned int chipid; ++ unsigned int chiprev; ++ unsigned int sdramsize; ++ ++ chipid = (PERF->RevID & 0xFFFF0000) >> 16; ++ chiprev = (PERF->RevID & 0xFF); ++ sdramsize = getMemorySize(); ++ /* ++ * Init the pci interface ++ */ ++ data = GPIO->GPIOMode; // GPIO mode register ++ data |= GROUP2_PCI | GROUP1_MII_PCCARD; // PCI internal arbiter + Cardbus ++ GPIO->GPIOMode = data; // PCI internal arbiter ++ ++ /* ++ * In the BCM6348 CardBus support is defaulted to Slot 0 ++ * because there is no external IDSEL for CardBus. To disable ++ * the CardBus and allow a standard PCI card in Slot 0 ++ * set the cbus_idsel field to 0x1f. ++ */ ++ /* ++ uData = mpi->pcmcia_cntl1; ++ uData |= CARDBUS_IDSEL; ++ mpi->pcmcia_cntl1 = uData; ++ */ ++ // Setup PCI I/O Window range. Give 64K to PCI I/O ++ mpi->l2piorange = ~(BCM_PCI_IO_SIZE_64KB-1); ++ // UBUS to PCI I/O base address ++ mpi->l2piobase = BCM_PCI_IO_BASE & BCM_PCI_ADDR_MASK; ++ // UBUS to PCI I/O Window remap ++ mpi->l2pioremap = (BCM_PCI_IO_BASE | MEM_WINDOW_EN); ++ ++ // enable PCI related GPIO pins and data swap between system and PCI bus ++ mpi->locbuscntrl = (EN_PCI_GPIO | DIR_U2P_NOSWAP); ++ ++ /* Enable 6348 BusMaster and Memory access mode */ ++ data = mpi_GetLocalPciConfigReg(PCI_COMMAND); ++ data |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); ++ mpi_SetLocalPciConfigReg(PCI_COMMAND, data); ++ ++ /* Configure two 16 MByte PCI to System memory regions. */ ++ /* These memory regions are used when PCI device is a bus master */ ++ /* Accesses to the SDRAM from PCI bus will be "byte swapped" for this region */ ++ mpi_SetLocalPciConfigReg(PCI_BASE_ADDRESS_3, BCM_HOST_MEM_SPACE1); ++ mpi->sp0remap = 0x0; ++ ++ /* Accesses to the SDRAM from PCI bus will not be "byte swapped" for this region */ ++ mpi_SetLocalPciConfigReg(PCI_BASE_ADDRESS_4, BCM_HOST_MEM_SPACE2); ++ mpi->sp1remap = 0x0; ++ mpi->pcimodesel |= (PCI_BAR2_NOSWAP | 0x40); ++ ++ if ((chipid == 0x6348) && (chiprev == 0xb0)) { ++ mpi->sp0range = ~(sdramsize-1); ++ mpi->sp1range = ~(sdramsize-1); ++ } ++ /* ++ * Change 6348 PCI Cfg Reg. offset 0x40 to PCI memory read retry count infinity ++ * by set 0 in bit 8~15. This resolve read Bcm4306 srom return 0xffff in ++ * first read. ++ */ ++ data = mpi_GetLocalPciConfigReg(BRCM_PCI_CONFIG_TIMER); ++ data &= ~BRCM_PCI_CONFIG_TIMER_RETRY_MASK; ++ data |= 0x00000080; ++ mpi_SetLocalPciConfigReg(BRCM_PCI_CONFIG_TIMER, data); ++ ++ /* enable pci interrupt */ ++ mpi->locintstat |= (EXT_PCI_INT << 16); ++ ++ mpi_DetectPcCard(); ++ ++ ioport_resource.start = BCM_PCI_IO_BASE; ++ ioport_resource.end = BCM_PCI_IO_BASE + BCM_PCI_IO_SIZE_64KB; ++ ++#if defined(CONFIG_USB) ++ PERF->blkEnables |= USBH_CLK_EN; ++ mdelay(100); ++ *USBH_NON_OHCI = NON_OHCI_BYTE_SWAP; ++#endif ++ ++ return 0; ++} ++#endif ++ ++static int __init brcm63xx_setup(void) ++{ ++ extern int panic_timeout; ++ ++ _machine_restart = brcm_machine_restart; ++ _machine_halt = brcm_machine_halt; ++ pm_power_off = brcm_machine_halt; ++ ++ board_time_init = brcm_time_init; ++ board_timer_setup = brcm_timer_setup; ++ ++ panic_timeout = 5; ++ ++#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI) ++ /* mpi initialization */ ++ mpi_init(); ++#endif ++ return 0; ++} ++ ++void plat_setup(void) ++{ ++ brcm63xx_setup(); ++} ++ ++/*************************************************************************** ++ * C++ New and delete operator functions ++ ***************************************************************************/ ++ ++/* void *operator new(unsigned int sz) */ ++void *_Znwj(unsigned int sz) ++{ ++ return( kmalloc(sz, GFP_KERNEL) ); ++} ++ ++/* void *operator new[](unsigned int sz)*/ ++void *_Znaj(unsigned int sz) ++{ ++ return( kmalloc(sz, GFP_KERNEL) ); ++} ++ ++/* placement new operator */ ++/* void *operator new (unsigned int size, void *ptr) */ ++void *ZnwjPv(unsigned int size, void *ptr) ++{ ++ return ptr; ++} ++ ++/* void operator delete(void *m) */ ++void _ZdlPv(void *m) ++{ ++ kfree(m); ++} ++ ++/* void operator delete[](void *m) */ ++void _ZdaPv(void *m) ++{ ++ kfree(m); ++} ++ ++EXPORT_SYMBOL(_Znwj); ++EXPORT_SYMBOL(_Znaj); ++EXPORT_SYMBOL(ZnwjPv); ++EXPORT_SYMBOL(_ZdlPv); ++EXPORT_SYMBOL(_ZdaPv); ++ +diff -urN linux.old/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h linux.dev/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h +--- linux.old/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/softdsl/AdslCoreDefs.h 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,2 @@ ++#define ADSL_SDRAM_IMAGE_SIZE (384*1024) ++ +diff -urN linux.old/arch/mips/bcm963xx/time.c linux.dev/arch/mips/bcm963xx/time.c +--- linux.old/arch/mips/bcm963xx/time.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/bcm963xx/time.c 2006-08-25 03:58:22.000000000 +0200 +@@ -0,0 +1,114 @@ ++/* ++<:copyright-gpl ++ Copyright 2004 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++/* ++ * Setup time for Broadcom 963xx MIPS boards ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++static unsigned long r4k_offset; /* Amount to increment compare reg each time */ ++static unsigned long r4k_cur; /* What counter should be at next timer irq */ ++ ++/* ********************************************************************* ++ * calculateCpuSpeed() ++ * Calculate the BCM6348 CPU speed by reading the PLL strap register ++ * and applying the following formula: ++ * cpu_clk = (.25 * 64MHz freq) * (N1 + 1) * (N2 + 2) / (M1_CPU + 1) ++ * Input parameters: ++ * none ++ * Return value: ++ * none ++ ********************************************************************* */ ++ ++static inline unsigned long __init calculateCpuSpeed(void) ++{ ++ UINT32 pllStrap = PERF->PllStrap; ++ int n1 = (pllStrap & PLL_N1_MASK) >> PLL_N1_SHFT; ++ int n2 = (pllStrap & PLL_N2_MASK) >> PLL_N2_SHFT; ++ int m1cpu = (pllStrap & PLL_M1_CPU_MASK) >> PLL_M1_CPU_SHFT; ++ ++ return (16 * (n1 + 1) * (n2 + 2) / (m1cpu + 1)) * 1000000; ++} ++ ++ ++static inline unsigned long __init cal_r4koff(void) ++{ ++ mips_hpt_frequency = calculateCpuSpeed() / 2; ++ return (mips_hpt_frequency / HZ); ++} ++ ++ ++/* ++ * There are a lot of conceptually broken versions of the MIPS timer interrupt ++ * handler floating around. This one is rather different, but the algorithm ++ * is provably more robust. ++ */ ++irqreturn_t brcm_timer_interrupt(struct pt_regs *regs) ++{ ++ int irq = MIPS_TIMER_INT; ++ ++ irq_enter(); ++ kstat_this_cpu.irqs[irq]++; ++ ++ timer_interrupt(irq, NULL, regs); ++ irq_exit(); ++ return IRQ_HANDLED; ++} ++ ++ ++void __init brcm_time_init(void) ++{ ++ unsigned int est_freq, flags; ++ local_irq_save(flags); ++ ++ printk("calculating r4koff... "); ++ r4k_offset = cal_r4koff(); ++ printk("%08lx(%d)\n", r4k_offset, (int)r4k_offset); ++ ++ est_freq = 2 * r4k_offset * HZ; ++ est_freq += 5000; /* round */ ++ est_freq -= est_freq % 10000; ++ printk("CPU frequency %d.%02d MHz\n", est_freq / 1000000, ++ (est_freq % 1000000) * 100 / 1000000); ++ local_irq_restore(flags); ++} ++ ++ ++void __init brcm_timer_setup(struct irqaction *irq) ++{ ++ r4k_cur = (read_c0_count() + r4k_offset); ++ write_c0_compare(r4k_cur); ++ set_c0_status(IE_IRQ5); ++} +diff -urN linux.old/arch/mips/Kconfig linux.dev/arch/mips/Kconfig +--- linux.old/arch/mips/Kconfig 2006-08-25 00:43:39.000000000 +0200 ++++ linux.dev/arch/mips/Kconfig 2006-08-25 01:57:46.000000000 +0200 +@@ -12,6 +12,15 @@ + prompt "System type" + default SGI_IP22 + ++config MIPS_BRCM ++ bool "Support for the Broadcom boards" ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_HAS_CPU_MIPS32_R1 ++ select IRQ_CPU ++ help ++ This is a fmaily of boards based on the Broadcom MIPS32 ++ + config MIPS_MTX1 + bool "4G Systems MTX-1 board" + select DMA_NONCOHERENT +@@ -780,6 +789,7 @@ + + endchoice + ++source "arch/mips/bcm963xx/Kconfig" + source "arch/mips/ddb5xxx/Kconfig" + source "arch/mips/gt64120/ev64120/Kconfig" + source "arch/mips/jazz/Kconfig" +diff -urN linux.old/arch/mips/kernel/cpu-probe.c linux.dev/arch/mips/kernel/cpu-probe.c +--- linux.old/arch/mips/kernel/cpu-probe.c 2006-08-25 00:43:39.000000000 +0200 ++++ linux.dev/arch/mips/kernel/cpu-probe.c 2006-08-25 00:39:38.000000000 +0200 +@@ -568,6 +568,25 @@ + return; + } + ++static inline void cpu_probe_broadcom(struct cpuinfo_mips *c) ++{ ++ decode_configs(c); ++ switch (c->processor_id & 0xff00) { ++ case PRID_IMP_BCM6338: ++ c->cputype = CPU_BCM6338; ++ break; ++ case PRID_IMP_BCM6345: ++ c->cputype = CPU_BCM6345; ++ break; ++ case PRID_IMP_BCM6348: ++ c->cputype = CPU_BCM6348; ++ break; ++ default: ++ c->cputype = CPU_UNKNOWN; ++ break; ++ } ++} ++ + static inline void cpu_probe_mips(struct cpuinfo_mips *c) + { + decode_configs(c); +@@ -704,6 +723,9 @@ + case PRID_COMP_LEGACY: + cpu_probe_legacy(c); + break; ++ case PRID_COMP_BROADCOM: ++ cpu_probe_broadcom(c); ++ break; + case PRID_COMP_MIPS: + cpu_probe_mips(c); + break; +diff -urN linux.old/arch/mips/kernel/proc.c linux.dev/arch/mips/kernel/proc.c +--- linux.old/arch/mips/kernel/proc.c 2006-08-25 00:43:39.000000000 +0200 ++++ linux.dev/arch/mips/kernel/proc.c 2006-08-25 00:39:38.000000000 +0200 +@@ -85,6 +85,9 @@ + [CPU_VR4181A] = "NEC VR4181A", + [CPU_SR71000] = "Sandcraft SR71000", + [CPU_PR4450] = "Philips PR4450", ++ [CPU_BCM6338] = "BCM6338", ++ [CPU_BCM6345] = "BCM6345", ++ [CPU_BCM6348] = "BCM6348", + }; + + +diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile +--- linux.old/arch/mips/Makefile 2006-08-25 00:43:39.000000000 +0200 ++++ linux.dev/arch/mips/Makefile 2006-08-25 11:36:41.000000000 +0200 +@@ -145,6 +145,19 @@ + # + + # ++# Broadcom board ++# ++core-$(CONFIG_MIPS_BRCM) += arch/mips/bcm963xx/ ++core-$(CONFIG_MIPS_BRCM) += bcmdrivers/opensource/char/serial/impl1/ ++#core-$(CONFIG_MIPS_BRCM) += bcmdrivers/opensource/char/board/bcm963xx/impl1/ ++#core-$(CONFIG_MIPS_BRCM) += boardparms/bcm963xx/ ++#cflags-$(CONFIG_MIPS_BRCM) += -Iinclude/asm-mips/mach-bcm963xx ++cflags-$(CONFIG_MIPS_BRCM) += -Iarch/mips/bcm963xx/include ++cflags-$(CONFIG_MIPS_BRCM) += -Iboardparms/bcm963xx ++load-$(CONFIG_MIPS_BRCM) += 0xffffffff80010000 ++ ++ ++# + # Acer PICA 61, Mips Magnum 4000 and Olivetti M700. + # + core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/ +diff -urN linux.old/arch/mips/mm/c-r4k.c linux.dev/arch/mips/mm/c-r4k.c +--- linux.old/arch/mips/mm/c-r4k.c 2006-08-25 00:43:39.000000000 +0200 ++++ linux.dev/arch/mips/mm/c-r4k.c 2006-08-25 00:39:38.000000000 +0200 +@@ -914,6 +914,13 @@ + if (!(config & MIPS_CONF_M)) + panic("Don't know how to probe P-caches on this cpu."); + ++ if (c->cputype == CPU_BCM6338 || c->cputype == CPU_BCM6345 || c->cputype == CPU_BCM6348) ++ { ++ printk("brcm mips: enabling icache and dcache...\n"); ++ /* Enable caches */ ++ write_c0_diag(read_c0_diag() | 0xC0000000); ++ } ++ + /* + * So we seem to be a MIPS32 or MIPS64 CPU + * So let's probe the I-cache ... +diff -urN linux.old/arch/mips/mm/tlbex.c linux.dev/arch/mips/mm/tlbex.c +--- linux.old/arch/mips/mm/tlbex.c 2006-08-25 00:43:39.000000000 +0200 ++++ linux.dev/arch/mips/mm/tlbex.c 2006-08-25 00:39:38.000000000 +0200 +@@ -882,6 +882,9 @@ + case CPU_4KSC: + case CPU_20KC: + case CPU_25KF: ++ case CPU_BCM6338: ++ case CPU_BCM6345: ++ case CPU_BCM6348: + tlbw(p); + break; + +diff -urN linux.old/arch/mips/pci/fixup-bcm96348.c linux.dev/arch/mips/pci/fixup-bcm96348.c +--- linux.old/arch/mips/pci/fixup-bcm96348.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/pci/fixup-bcm96348.c 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,85 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE); ++ ++static char irq_tab_bcm96348[] __initdata = { ++ [0] = INTERRUPT_ID_MPI, ++ [1] = INTERRUPT_ID_MPI, ++#if defined(CONFIG_USB) ++ [USB_HOST_SLOT] = INTERRUPT_ID_USBH ++#endif ++}; ++ ++int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) ++{ ++ return irq_tab_bcm96348[slot]; ++} ++ ++static void bcm96348_fixup(struct pci_dev *dev) ++{ ++ uint32 memaddr; ++ uint32 size; ++ ++ memaddr = pci_resource_start(dev, 0); ++ size = pci_resource_len(dev, 0); ++ ++ switch (PCI_SLOT(dev->devfn)) { ++ case 0: ++ // UBUS to PCI address range ++ // Memory Window 1. Mask determines which bits are decoded. ++ mpi->l2pmrange1 = ~(size-1); ++ // UBUS to PCI Memory base address. This is akin to the ChipSelect base ++ // register. ++ mpi->l2pmbase1 = memaddr & BCM_PCI_ADDR_MASK; ++ // UBUS to PCI Remap Address. Replaces the masked address bits in the ++ // range register with this setting. ++ // Also, enable direct I/O and direct Memory accesses ++ mpi->l2pmremap1 = (memaddr | MEM_WINDOW_EN); ++ break; ++ ++ case 1: ++ // Memory Window 2 ++ mpi->l2pmrange2 = ~(size-1); ++ // UBUS to PCI Memory base address. ++ mpi->l2pmbase2 = memaddr & BCM_PCI_ADDR_MASK; ++ // UBUS to PCI Remap Address ++ mpi->l2pmremap2 = (memaddr | MEM_WINDOW_EN); ++ break; ++ ++#if defined(CONFIG_USB) ++ case USB_HOST_SLOT: ++ dev->resource[0].start = USB_HOST_BASE; ++ dev->resource[0].end = USB_HOST_BASE+USB_BAR0_MEM_SIZE-1; ++ break; ++#endif ++ } ++} ++ ++struct pci_fixup pcibios_fixups[] = { ++ { PCI_FIXUP_FINAL, PCI_ANY_ID, PCI_ANY_ID, bcm96348_fixup }, ++ {0} ++}; +diff -urN linux.old/arch/mips/pci/Makefile linux.dev/arch/mips/pci/Makefile +--- linux.old/arch/mips/pci/Makefile 2006-08-25 00:43:29.000000000 +0200 ++++ linux.dev/arch/mips/pci/Makefile 2006-08-25 00:39:38.000000000 +0200 +@@ -18,6 +18,7 @@ + obj-$(CONFIG_MIPS_TX3927) += ops-tx3927.o + obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o + obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o ++obj-$(CONFIG_BCM_PCI) += fixup-bcm96348.o pci-bcm96348.o ops-bcm96348.o + + # + # These are still pretty much in the old state, watch, go blind. +diff -urN linux.old/arch/mips/pci/ops-bcm96348.c linux.dev/arch/mips/pci/ops-bcm96348.c +--- linux.old/arch/mips/pci/ops-bcm96348.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/pci/ops-bcm96348.c 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,276 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#include ++ ++#if defined(CONFIG_USB) ++#if 0 ++#define DPRINT(x...) printk(x) ++#else ++#define DPRINT(x...) ++#endif ++ ++static int ++pci63xx_int_read(unsigned int devfn, int where, u32 * value, int size); ++static int ++pci63xx_int_write(unsigned int devfn, int where, u32 * value, int size); ++ ++static bool usb_mem_size_rd = FALSE; ++static uint32 usb_mem_base = 0; ++static uint32 usb_cfg_space_cmd_reg = 0; ++#endif ++static bool pci_mem_size_rd = FALSE; ++ ++static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE); ++ ++static void mpi_SetupPciConfigAccess(uint32 addr) ++{ ++ mpi->l2pcfgctl = (DIR_CFG_SEL | DIR_CFG_USEREG | addr) & ~CONFIG_TYPE; ++} ++ ++static void mpi_ClearPciConfigAccess(void) ++{ ++ mpi->l2pcfgctl = 0x00000000; ++} ++ ++#if defined(CONFIG_USB) ++/* -------------------------------------------------------------------------- ++ Name: pci63xx_int_write ++Abstract: PCI Config write on internal device(s) ++ -------------------------------------------------------------------------- */ ++static int ++pci63xx_int_write(unsigned int devfn, int where, u32 * value, int size) ++{ ++ if (PCI_SLOT(devfn) != USB_HOST_SLOT) { ++ return PCIBIOS_SUCCESSFUL; ++ } ++ ++ switch (size) { ++ case 1: ++ DPRINT("W => Slot: %d Where: %2X Len: %d Data: %02X\n", ++ PCI_SLOT(devfn), where, size, *value); ++ break; ++ case 2: ++ DPRINT("W => Slot: %d Where: %2X Len: %d Data: %04X\n", ++ PCI_SLOT(devfn), where, size, *value); ++ switch (where) { ++ case PCI_COMMAND: ++ usb_cfg_space_cmd_reg = *value; ++ break; ++ default: ++ break; ++ } ++ break; ++ case 4: ++ DPRINT("W => Slot: %d Where: %2X Len: %d Data: %08lX\n", ++ PCI_SLOT(devfn), where, size, *value); ++ switch (where) { ++ case PCI_BASE_ADDRESS_0: ++ if (*value == 0xffffffff) { ++ usb_mem_size_rd = TRUE; ++ } else { ++ usb_mem_base = *value; ++ } ++ break; ++ default: ++ break; ++ } ++ break; ++ default: ++ break; ++ } ++ ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++/* -------------------------------------------------------------------------- ++ Name: pci63xx_int_read ++Abstract: PCI Config read on internal device(s) ++ -------------------------------------------------------------------------- */ ++static int ++pci63xx_int_read(unsigned int devfn, int where, u32 * value, int size) ++{ ++ uint32 retValue = 0xFFFFFFFF; ++ ++ if (PCI_SLOT(devfn) != USB_HOST_SLOT) { ++ return PCIBIOS_SUCCESSFUL; ++ } ++ ++ // For now, this is specific to the USB Host controller. We can ++ // make it more general if we have to... ++ // Emulate PCI Config accesses ++ switch (where) { ++ case PCI_VENDOR_ID: ++ case PCI_DEVICE_ID: ++ retValue = PCI_VENDOR_ID_BROADCOM | 0x63000000; ++ break; ++ case PCI_COMMAND: ++ case PCI_STATUS: ++ retValue = (0x0006 << 16) | usb_cfg_space_cmd_reg; ++ break; ++ case PCI_CLASS_REVISION: ++ case PCI_CLASS_DEVICE: ++ retValue = (PCI_CLASS_SERIAL_USB << 16) | (0x10 << 8) | 0x01; ++ break; ++ case PCI_BASE_ADDRESS_0: ++ if (usb_mem_size_rd) { ++ retValue = USB_BAR0_MEM_SIZE; ++ } else { ++ if (usb_mem_base != 0) ++ retValue = usb_mem_base; ++ else ++ retValue = USB_HOST_BASE; ++ } ++ usb_mem_size_rd = FALSE; ++ break; ++ case PCI_CACHE_LINE_SIZE: ++ case PCI_LATENCY_TIMER: ++ retValue = 0; ++ break; ++ case PCI_HEADER_TYPE: ++ retValue = PCI_HEADER_TYPE_NORMAL; ++ break; ++ case PCI_SUBSYSTEM_VENDOR_ID: ++ retValue = PCI_VENDOR_ID_BROADCOM; ++ break; ++ case PCI_SUBSYSTEM_ID: ++ retValue = 0x6300; ++ break; ++ case PCI_INTERRUPT_LINE: ++ retValue = INTERRUPT_ID_USBH; ++ break; ++ default: ++ break; ++ } ++ ++ switch (size) { ++ case 1: ++ *value = (retValue >> ((where & 3) << 3)) & 0xff; ++ DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %02X\n", ++ PCI_SLOT(devfn), where, size, *value); ++ break; ++ case 2: ++ *value = (retValue >> ((where & 3) << 3)) & 0xffff; ++ DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %04X\n", ++ PCI_SLOT(devfn), where, size, *value); ++ break; ++ case 4: ++ *value = retValue; ++ DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %08lX\n", ++ PCI_SLOT(devfn), where, size, *value); ++ break; ++ default: ++ break; ++ } ++ ++ return PCIBIOS_SUCCESSFUL; ++} ++#endif ++ ++static int bcm96348_pcibios_read(struct pci_bus *bus, unsigned int devfn, ++ int where, int size, u32 * val) ++{ ++ volatile unsigned char *ioBase = (unsigned char *)(mpi->l2piobase | KSEG1); ++ uint32 data; ++ ++#if defined(CONFIG_USB) ++ if (PCI_SLOT(devfn) == USB_HOST_SLOT) ++ return pci63xx_int_read(devfn, where, val, size); ++#endif ++ ++ mpi_SetupPciConfigAccess(BCM_PCI_CFG(PCI_SLOT(devfn), PCI_FUNC(devfn), where)); ++ data = *(uint32 *)ioBase; ++ switch(size) { ++ case 1: ++ *val = (data >> ((where & 3) << 3)) & 0xff; ++ break; ++ case 2: ++ *val = (data >> ((where & 3) << 3)) & 0xffff; ++ break; ++ case 4: ++ *val = data; ++ /* Special case for reading PCI device range */ ++ if ((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_5)) { ++ if (pci_mem_size_rd) { ++ /* bcm6348 PCI memory window minimum size is 64K */ ++ *val &= PCI_SIZE_64K; ++ } ++ } ++ break; ++ default: ++ break; ++ } ++ pci_mem_size_rd = FALSE; ++ mpi_ClearPciConfigAccess(); ++ ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++static int bcm96348_pcibios_write(struct pci_bus *bus, unsigned int devfn, ++ int where, int size, u32 val) ++{ ++ volatile unsigned char *ioBase = (unsigned char *)(mpi->l2piobase | KSEG1); ++ uint32 data; ++ ++#if defined(CONFIG_USB) ++ if (PCI_SLOT(devfn) == USB_HOST_SLOT) ++ return pci63xx_int_write(devfn, where, &val, size); ++#endif ++ mpi_SetupPciConfigAccess(BCM_PCI_CFG(PCI_SLOT(devfn), PCI_FUNC(devfn), where)); ++ data = *(uint32 *)ioBase; ++ switch(size) { ++ case 1: ++ data = (data & ~(0xff << ((where & 3) << 3))) | ++ (val << ((where & 3) << 3)); ++ break; ++ case 2: ++ data = (data & ~(0xffff << ((where & 3) << 3))) | ++ (val << ((where & 3) << 3)); ++ break; ++ case 4: ++ data = val; ++ /* Special case for reading PCI device range */ ++ if ((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_5)) { ++ if (val == 0xffffffff) ++ pci_mem_size_rd = TRUE; ++ } ++ break; ++ default: ++ break; ++ } ++ *(uint32 *)ioBase = data; ++ udelay(500); ++ mpi_ClearPciConfigAccess(); ++ ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++struct pci_ops bcm96348_pci_ops = { ++ .read = bcm96348_pcibios_read, ++ .write = bcm96348_pcibios_write ++}; +diff -urN linux.old/arch/mips/pci/pci-bcm96348.c linux.dev/arch/mips/pci/pci-bcm96348.c +--- linux.old/arch/mips/pci/pci-bcm96348.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/arch/mips/pci/pci-bcm96348.c 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,54 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++static struct resource bcm_pci_io_resource = { ++ .name = "bcm96348 pci IO space", ++ .start = BCM_PCI_IO_BASE, ++ .end = BCM_PCI_IO_BASE + BCM_PCI_IO_SIZE_64KB - 1, ++ .flags = IORESOURCE_IO ++}; ++ ++static struct resource bcm_pci_mem_resource = { ++ .name = "bcm96348 pci memory space", ++ .start = BCM_PCI_MEM_BASE, ++ .end = BCM_PCI_MEM_BASE + BCM_PCI_MEM_SIZE_16MB - 1, ++ .flags = IORESOURCE_MEM ++}; ++ ++extern struct pci_ops bcm96348_pci_ops; ++ ++struct pci_controller bcm96348_controller = { ++ .pci_ops = &bcm96348_pci_ops, ++ .io_resource = &bcm_pci_io_resource, ++ .mem_resource = &bcm_pci_mem_resource, ++}; ++ ++static void bcm96348_pci_init(void) ++{ ++ register_pci_controller(&bcm96348_controller); ++} ++ ++arch_initcall(bcm96348_pci_init); +diff -urN linux.old/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c linux.dev/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c +--- linux.old/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,1056 @@ ++/* ++<:copyright-gpl ++ Copyright 2002 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++:> ++*/ ++ ++/* Description: Serial port driver for the BCM963XX. */ ++ ++#define CARDNAME "bcm963xx_serial driver" ++#define VERSION "2.0" ++#define VER_STR CARDNAME " v" VERSION "\n" ++ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++/* for definition of struct console */ ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++ ++static DEFINE_SPINLOCK(bcm963xx_serial_lock); ++ ++extern void _putc(char); ++extern void _puts(const char *); ++ ++typedef struct bcm_serial { ++ volatile Uart * port; ++ int type; ++ int flags; ++ int irq; ++ int baud_base; ++ int blocked_open; ++ unsigned short close_delay; ++ unsigned short closing_wait; ++ unsigned short line; /* port/line number */ ++ unsigned short cflags; /* line configuration flag */ ++ unsigned short x_char; /* xon/xoff character */ ++ unsigned short read_status_mask; /* mask for read condition */ ++ unsigned short ignore_status_mask; /* mask for ignore condition */ ++ unsigned long event; /* mask used in BH */ ++ int xmit_head; /* Position of the head */ ++ int xmit_tail; /* Position of the tail */ ++ int xmit_cnt; /* Count of the chars in the buffer */ ++ int count; /* indicates how many times it has been opened */ ++ int magic; ++ ++ struct async_icount icount; /* keep track of things ... */ ++ struct tty_struct *tty; /* tty associated */ ++ struct termios normal_termios; ++ ++ wait_queue_head_t open_wait; ++ wait_queue_head_t close_wait; ++ ++ long session; /* Session of opening process */ ++ long pgrp; /* pgrp of opening process */ ++ ++ unsigned char is_initialized; ++} Context; ++ ++ ++/*---------------------------------------------------------------------*/ ++/* Define bits in the Interrupt Enable register */ ++/*---------------------------------------------------------------------*/ ++/* Enable receive interrupt */ ++#define RXINT (RXFIFONE|RXOVFERR) ++ ++/* Enable transmit interrupt */ ++#define TXINT (TXFIFOEMT|TXUNDERR|TXOVFERR) ++ ++/* Enable receiver line status interrupt */ ++#define LSINT (RXBRK|RXPARERR|RXFRAMERR) ++ ++#define BCM_NUM_UARTS 1 ++ ++#define BD_BCM63XX_TIMER_CLOCK_INPUT (FPERIPH) ++ ++ ++static struct bcm_serial multi[BCM_NUM_UARTS]; ++static struct bcm_serial *lines[BCM_NUM_UARTS]; ++static struct tty_driver serial_driver; ++static struct tty_struct *serial_table[BCM_NUM_UARTS]; ++static struct termios *serial_termios[BCM_NUM_UARTS]; ++static struct termios *serial_termios_locked[BCM_NUM_UARTS]; ++static int serial_refcount; ++ ++ ++static void bcm_stop (struct tty_struct *tty); ++static void bcm_start (struct tty_struct *tty); ++static inline void receive_chars (struct bcm_serial * info); ++static int startup (struct bcm_serial *info); ++static void shutdown (struct bcm_serial * info); ++static void change_speed( volatile Uart *pUart, tcflag_t cFlag ); ++static void bcm63xx_cons_flush_chars (struct tty_struct *tty); ++static int bcm63xx_cons_write (struct tty_struct *tty, int from_user, ++ const unsigned char *buf, int count); ++static int bcm63xx_cons_write_room (struct tty_struct *tty); ++static int bcm_chars_in_buffer (struct tty_struct *tty); ++static void bcm_flush_buffer (struct tty_struct *tty); ++static void bcm_throttle (struct tty_struct *tty); ++static void bcm_unthrottle (struct tty_struct *tty); ++static void bcm_send_xchar (struct tty_struct *tty, char ch); ++static int get_serial_info(struct bcm_serial *info, struct serial_struct *retinfo); ++static int set_serial_info (struct bcm_serial *info, struct serial_struct *new_info); ++static int get_lsr_info (struct bcm_serial *info, unsigned int *value); ++static void send_break (struct bcm_serial *info, int duration); ++static int bcm_ioctl (struct tty_struct * tty, struct file * file, ++ unsigned int cmd, unsigned long arg); ++static void bcm_set_termios (struct tty_struct *tty, struct termios *old_termios); ++static void bcm63xx_cons_close (struct tty_struct *tty, struct file *filp); ++static void bcm_hangup (struct tty_struct *tty); ++static int block_til_ready (struct tty_struct *tty, struct file *filp, struct bcm_serial *info); ++static int bcm63xx_cons_open (struct tty_struct * tty, struct file * filp); ++static int __init bcm63xx_serialinit(void); ++ ++ ++/* ++ * ------------------------------------------------------------ ++ * rs_stop () and rs_start () ++ * ++ * These routines are called before setting or resetting ++ * tty->stopped. They enable or disable transmitter interrupts, ++ * as necessary. ++ * ------------------------------------------------------------ ++ */ ++static void bcm_stop (struct tty_struct *tty) ++{ ++} ++ ++static void bcm_start (struct tty_struct *tty) ++{ ++ _puts(CARDNAME " Start\n"); ++} ++ ++/* ++ * ------------------------------------------------------------ ++ * receive_char () ++ * ++ * This routine deals with inputs from any lines. ++ * ------------------------------------------------------------ ++ */ ++static inline void receive_chars (struct bcm_serial * info) ++{ ++ struct tty_struct *tty = 0; ++ struct async_icount * icount; ++ int ignore = 0; ++ unsigned short status, tmp; ++ UCHAR ch = 0; ++ while ((status = info->port->intStatus) & RXINT) ++ { ++ char flag_char = 0; ++ ++ if (status & RXFIFONE) ++ ch = info->port->Data; // Read the character ++ tty = info->tty; /* now tty points to the proper dev */ ++ icount = &info->icount; ++ if (! tty) ++ break; ++ if (!tty_buffer_request_room(tty, 1)) ++ break; ++ icount->rx++; ++ if (status & RXBRK) ++ { ++ flag_char = TTY_BREAK; ++ icount->brk++; ++ } ++ // keep track of the statistics ++ if (status & (RXFRAMERR | RXPARERR | RXOVFERR)) ++ { ++ if (status & RXPARERR) /* parity error */ ++ icount->parity++; ++ else ++ if (status & RXFRAMERR) /* frame error */ ++ icount->frame++; ++ if (status & RXOVFERR) ++ { ++ // Overflow. Reset the RX FIFO ++ info->port->fifoctl |= RSTRXFIFOS; ++ icount->overrun++; ++ } ++ // check to see if we should ignore the character ++ // and mask off conditions that should be ignored ++ if (status & info->ignore_status_mask) ++ { ++ if (++ignore > 100 ) ++ break; ++ goto ignore_char; ++ } ++ // Mask off the error conditions we want to ignore ++ tmp = status & info->read_status_mask; ++ if (tmp & RXPARERR) ++ { ++ flag_char = TTY_PARITY; ++ } ++ else ++ if (tmp & RXFRAMERR) ++ { ++ flag_char = TTY_FRAME; ++ } ++ if (tmp & RXOVFERR) ++ { ++ tty_insert_flip_char(tty, ch, flag_char); ++ ch = 0; ++ flag_char = TTY_OVERRUN; ++ if (!tty_buffer_request_room(tty, 1)) ++ break; ++ } ++ } ++ tty_insert_flip_char(tty, ch, flag_char); ++ } ++ignore_char: ++ if (tty) ++ tty_flip_buffer_push(tty); ++} ++ ++ ++/* ++ * ------------------------------------------------------------ ++ * bcm_interrupt () ++ * ++ * this is the main interrupt routine for the chip. ++ * It deals with the multiple ports. ++ * ------------------------------------------------------------ ++ */ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ++static irqreturn_t bcm_interrupt (int irq, void * dev, struct pt_regs * regs) ++#else ++static void bcm_interrupt (int irq, void * dev, struct pt_regs * regs) ++#endif ++{ ++ struct bcm_serial * info = lines[0]; ++ UINT16 intStat; ++ ++ /* get pending interrupt flags from UART */ ++ ++ /* Mask with only the serial interrupts that are enabled */ ++ intStat = info->port->intStatus & info->port->intMask; ++ while (intStat) ++ { ++ if (intStat & RXINT) ++ receive_chars (info); ++ else ++ if (intStat & TXINT) ++ info->port->intStatus = TXINT; ++ else /* don't know what it was, so let's mask it */ ++ info->port->intMask &= ~intStat; ++ ++ intStat = info->port->intStatus & info->port->intMask; ++ } ++ ++ // Clear the interrupt ++ BcmHalInterruptEnable (INTERRUPT_ID_UART); ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ++ return IRQ_HANDLED; ++#endif ++} ++ ++/* ++ * ------------------------------------------------------------------- ++ * startup () ++ * ++ * various initialization tasks ++ * ------------------------------------------------------------------- ++ */ ++static int startup (struct bcm_serial *info) ++{ ++ // Port is already started... ++ return 0; ++} ++ ++/* ++ * ------------------------------------------------------------------- ++ * shutdown () ++ * ++ * This routine will shutdown a serial port; interrupts are disabled, and ++ * DTR is dropped if the hangup on close termio flag is on. ++ * ------------------------------------------------------------------- ++ */ ++static void shutdown (struct bcm_serial * info) ++{ ++ unsigned long flags; ++ if (!info->is_initialized) ++ return; ++ ++ ++ /*save_flags (flags); ++ cli ();*/ ++ spin_lock_irqsave(&bcm963xx_serial_lock, flags); ++ ++ info->port->control &= ~(BRGEN|TXEN|RXEN); ++ if (info->tty) ++ set_bit (TTY_IO_ERROR, &info->tty->flags); ++ info->is_initialized = 0; ++ ++ //restore_flags (flags); ++ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags); ++} ++/* ++ * ------------------------------------------------------------------- ++ * change_speed () ++ * ++ * Set the baud rate, character size, parity and stop bits. ++ * ------------------------------------------------------------------- ++ */ ++static void change_speed( volatile Uart *pUart, tcflag_t cFlag ) ++{ ++ unsigned long ulFlags, ulBaud, ulClockFreqHz, ulTmp; ++ /*save_flags(ulFlags); ++ cli();*/ ++ spin_lock_irqsave(&bcm963xx_serial_lock, ulFlags); ++ ++ switch( cFlag & (CBAUD | CBAUDEX) ) ++ { ++ case B115200: ++ ulBaud = 115200; ++ break; ++ case B57600: ++ ulBaud = 57600; ++ break; ++ case B38400: ++ ulBaud = 38400; ++ break; ++ case B19200: ++ ulBaud = 19200; ++ break; ++ case B9600: ++ ulBaud = 9600; ++ break; ++ case B4800: ++ ulBaud = 4800; ++ break; ++ case B2400: ++ ulBaud = 2400; ++ break; ++ case B1800: ++ ulBaud = 1800; ++ break; ++ case B1200: ++ ulBaud = 1200; ++ break; ++ case B600: ++ ulBaud = 600; ++ break; ++ case B300: ++ ulBaud = 300; ++ break; ++ case B200: ++ ulBaud = 200; ++ break; ++ case B150: ++ ulBaud = 150; ++ break; ++ case B134: ++ ulBaud = 134; ++ break; ++ case B110: ++ ulBaud = 110; ++ break; ++ case B75: ++ ulBaud = 75; ++ break; ++ case B50: ++ ulBaud = 50; ++ break; ++ default: ++ ulBaud = 115200; ++ break; ++ } ++ ++ /* Calculate buad rate. */ ++ ulClockFreqHz = BD_BCM63XX_TIMER_CLOCK_INPUT; ++ ulTmp = (ulClockFreqHz / ulBaud) / 16; ++ if( ulTmp & 0x01 ) ++ ulTmp /= 2; /* Rounding up, so sub is already accounted for */ ++ else ++ ulTmp = (ulTmp / 2) - 1; /* Rounding down so we must sub 1 */ ++ pUart->baudword = ulTmp; ++ ++ /* Set character size, stop bits and parity. */ ++ switch( cFlag & CSIZE ) ++ { ++ case CS5: ++ ulTmp = BITS5SYM; /* select transmit 5 bit data size */ ++ break; ++ case CS6: ++ ulTmp = BITS6SYM; /* select transmit 6 bit data size */ ++ break; ++ case CS7: ++ ulTmp = BITS7SYM; /* select transmit 7 bit data size */ ++ break; ++ /*case CS8:*/ ++ default: ++ ulTmp = BITS8SYM; /* select transmit 8 bit data size */ ++ break; ++ } ++ if( cFlag & CSTOPB ) ++ ulTmp |= TWOSTOP; /* select 2 stop bits */ ++ else ++ ulTmp |= ONESTOP; /* select one stop bit */ ++ ++ /* Write these values into the config reg. */ ++ pUart->config = ulTmp; ++ pUart->control &= ~(RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN); ++ switch( cFlag & (PARENB | PARODD) ) ++ { ++ case PARENB|PARODD: ++ pUart->control |= RXPARITYEN | TXPARITYEN; ++ break; ++ case PARENB: ++ pUart->control |= RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN; ++ break; ++ default: ++ pUart->control |= 0; ++ break; ++ } ++ ++ /* Reset and flush uart */ ++ pUart->fifoctl = RSTTXFIFOS | RSTRXFIFOS; ++ //restore_flags( ulFlags ); ++ spin_unlock_irqrestore(&bcm963xx_serial_lock, ulFlags); ++} ++ ++ ++/* ++ * ------------------------------------------------------------------- ++ * bcm_flush_char () ++ * ++ * Nothing to flush. Polled I/O is used. ++ * ------------------------------------------------------------------- ++ */ ++static void bcm63xx_cons_flush_chars (struct tty_struct *tty) ++{ ++} ++ ++ ++/* ++ * ------------------------------------------------------------------- ++ * bcm63xx_cons_write () ++ * ++ * Main output routine using polled I/O. ++ * ------------------------------------------------------------------- ++ */ ++static int bcm63xx_cons_write (struct tty_struct *tty, int from_user, ++ const unsigned char *buf, int count) ++{ ++ int c; ++ ++ for (c = 0; c < count; c++) ++ _putc(buf[c]); ++ return count; ++} ++ ++/* ++ * ------------------------------------------------------------------- ++ * bcm63xx_cons_write_room () ++ * ++ * Compute the amount of space available for writing. ++ * ------------------------------------------------------------------- ++ */ ++static int bcm63xx_cons_write_room (struct tty_struct *tty) ++{ ++ /* Pick a number. Any number. Polled I/O is used. */ ++ return 1024; ++} ++ ++/* ++ * ------------------------------------------------------------------- ++ * bcm_chars_in_buffer () ++ * ++ * compute the amount of char left to be transmitted ++ * ------------------------------------------------------------------- ++ */ ++static int bcm_chars_in_buffer (struct tty_struct *tty) ++{ ++ return 0; ++} ++ ++/* ++ * ------------------------------------------------------------------- ++ * bcm_flush_buffer () ++ * ++ * Empty the output buffer ++ * ------------------------------------------------------------------- ++ */ ++static void bcm_flush_buffer (struct tty_struct *tty) ++{ ++} ++ ++/* ++ * ------------------------------------------------------------ ++ * bcm_throttle () and bcm_unthrottle () ++ * ++ * This routine is called by the upper-layer tty layer to signal that ++ * incoming characters should be throttled (or not). ++ * ------------------------------------------------------------ ++ */ ++static void bcm_throttle (struct tty_struct *tty) ++{ ++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; ++ if (I_IXOFF(tty)) ++ info->x_char = STOP_CHAR(tty); ++} ++ ++static void bcm_unthrottle (struct tty_struct *tty) ++{ ++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; ++ if (I_IXOFF(tty)) ++ { ++ if (info->x_char) ++ info->x_char = 0; ++ else ++ info->x_char = START_CHAR(tty); ++ } ++} ++ ++static void bcm_send_xchar (struct tty_struct *tty, char ch) ++{ ++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; ++ info->x_char = ch; ++ if (ch) ++ bcm_start (info->tty); ++} ++ ++/* ++ * ------------------------------------------------------------ ++ * rs_ioctl () and friends ++ * ------------------------------------------------------------ ++ */ ++static int get_serial_info(struct bcm_serial *info, struct serial_struct *retinfo) ++{ ++ struct serial_struct tmp; ++ ++ if (!retinfo) ++ return -EFAULT; ++ ++ memset (&tmp, 0, sizeof(tmp)); ++ tmp.type = info->type; ++ tmp.line = info->line; ++ tmp.port = (int) info->port; ++ tmp.irq = info->irq; ++ tmp.flags = 0; ++ tmp.baud_base = info->baud_base; ++ tmp.close_delay = info->close_delay; ++ tmp.closing_wait = info->closing_wait; ++ ++ return copy_to_user (retinfo, &tmp, sizeof(*retinfo)); ++} ++ ++static int set_serial_info (struct bcm_serial *info, struct serial_struct *new_info) ++{ ++ struct serial_struct new_serial; ++ struct bcm_serial old_info; ++ int retval = 0; ++ ++ if (!new_info) ++ return -EFAULT; ++ ++ copy_from_user (&new_serial, new_info, sizeof(new_serial)); ++ old_info = *info; ++ ++ if (!capable(CAP_SYS_ADMIN)) ++ return -EPERM; ++ ++ ++ if (info->count > 1) ++ return -EBUSY; ++ ++ /* OK, past this point, all the error checking has been done. ++ * At this point, we start making changes..... ++ */ ++ info->baud_base = new_serial.baud_base; ++ info->type = new_serial.type; ++ info->close_delay = new_serial.close_delay; ++ info->closing_wait = new_serial.closing_wait; ++ retval = startup (info); ++ return retval; ++} ++ ++/* ++ * get_lsr_info - get line status register info ++ * ++ * Purpose: Let user call ioctl() to get info when the UART physically ++ * is emptied. On bus types like RS485, the transmitter must ++ * release the bus after transmitting. This must be done when ++ * the transmit shift register is empty, not be done when the ++ * transmit holding register is empty. This functionality ++ * allows an RS485 driver to be written in user space. ++ */ ++static int get_lsr_info (struct bcm_serial *info, unsigned int *value) ++{ ++ return( 0 ); ++} ++ ++/* ++ * This routine sends a break character out the serial port. ++ */ ++static void send_break (struct bcm_serial *info, int duration) ++{ ++ unsigned long flags; ++ ++ if (!info->port) ++ return; ++ ++ current->state = TASK_INTERRUPTIBLE; ++ ++ /*save_flags (flags); ++ cli();*/ ++ spin_lock_irqsave(&bcm963xx_serial_lock, flags); ++ ++ info->port->control |= XMITBREAK; ++ schedule_timeout(duration); ++ info->port->control &= ~XMITBREAK; ++ ++ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags); ++ //restore_flags (flags); ++} ++ ++static int bcm_ioctl (struct tty_struct * tty, struct file * file, ++ unsigned int cmd, unsigned long arg) ++{ ++ int error; ++ struct bcm_serial * info = (struct bcm_serial *)tty->driver_data; ++ int retval; ++ ++ if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && ++ (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) && ++ (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) ++ { ++ if (tty->flags & (1 << TTY_IO_ERROR)) ++ return -EIO; ++ } ++ switch (cmd) ++ { ++ ++ case TCSBRK: /* SVID version: non-zero arg --> no break */ ++ retval = tty_check_change (tty); ++ if (retval) ++ return retval; ++ tty_wait_until_sent (tty, 0); ++ if (!arg) ++ send_break (info, HZ/4); /* 1/4 second */ ++ return 0; ++ ++ case TCSBRKP: /* support for POSIX tcsendbreak() */ ++ retval = tty_check_change (tty); ++ if (retval) ++ return retval; ++ tty_wait_until_sent (tty, 0); ++ send_break (info, arg ? arg*(HZ/10) : HZ/4); ++ return 0; ++ ++ case TIOCGSOFTCAR: ++ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(long)); ++ if (!error) ++ return -EFAULT; ++ else ++ { ++ put_user (C_CLOCAL(tty) ? 1 : 0, (unsigned long *)arg); ++ return 0; ++ } ++ ++ case TIOCSSOFTCAR: ++ error = get_user (arg, (unsigned long *)arg); ++ if (error) ++ return error; ++ tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0)); ++ return 0; ++ ++ case TIOCGSERIAL: ++ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(struct serial_struct)); ++ if (!error) ++ return -EFAULT; ++ else ++ return get_serial_info (info, (struct serial_struct *)arg); ++ ++ case TIOCSSERIAL: ++ return set_serial_info (info, (struct serial_struct *) arg); ++ ++ case TIOCSERGETLSR: /* Get line status register */ ++ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(unsigned int)); ++ if (!error) ++ return -EFAULT; ++ else ++ return get_lsr_info (info, (unsigned int *)arg); ++ ++ case TIOCSERGSTRUCT: ++ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(struct bcm_serial)); ++ if (!error) ++ return -EFAULT; ++ else ++ { ++ copy_to_user((struct bcm_serial *)arg, info, sizeof(struct bcm_serial)); ++ return 0; ++ } ++ ++ default: ++ return -ENOIOCTLCMD; ++ } ++ return 0; ++} ++ ++static void bcm_set_termios (struct tty_struct *tty, struct termios *old_termios) ++{ ++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; ++ ++ if( tty->termios->c_cflag != old_termios->c_cflag ) ++ change_speed (info->port, tty->termios->c_cflag); ++} ++ ++/* ++ * ------------------------------------------------------------ ++ * bcm63xx_cons_close() ++ * ++ * This routine is called when the serial port gets closed. First, we ++ * wait for the last remaining data to be sent. Then, we turn off ++ * the transmit enable and receive enable flags. ++ * ------------------------------------------------------------ ++ */ ++static void bcm63xx_cons_close (struct tty_struct *tty, struct file *filp) ++{ ++ struct bcm_serial * info = (struct bcm_serial *)tty->driver_data; ++ unsigned long flags; ++ ++ if (!info) ++ return; ++ ++ /*save_flags (flags); ++ cli();*/ ++ spin_lock_irqsave(&bcm963xx_serial_lock, flags); ++ ++ if (tty_hung_up_p (filp)) ++ { ++ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags); ++ //restore_flags (flags); ++ return; ++ } ++ ++ if ((tty->count == 1) && (info->count != 1)) ++ { ++ ++ /* Uh, oh. tty->count is 1, which means that the tty ++ * structure will be freed. Info->count should always ++ * be one in these conditions. If it's greater than ++ * one, we've got real problems, since it means the ++ * serial port won't be shutdown. ++ */ ++ printk("bcm63xx_cons_close: bad serial port count; tty->count is 1, " ++ "info->count is %d\n", info->count); ++ info->count = 1; ++ } ++ ++ if (--info->count < 0) ++ { ++ printk("ds_close: bad serial port count for ttys%d: %d\n", ++ info->line, info->count); ++ info->count = 0; ++ } ++ ++ if (info->count) ++ { ++ //restore_flags (flags); ++ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags); ++ return; ++ } ++ ++ /* Now we wait for the transmit buffer to clear; and we notify ++ * the line discipline to only process XON/XOFF characters. ++ */ ++ tty->closing = 1; ++ ++ /* At this point we stop accepting input. To do this, we ++ * disable the receive line status interrupts. ++ */ ++ shutdown (info); ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ++ if (tty->driver->flush_buffer) ++ tty->driver->flush_buffer (tty); ++#else ++ if (tty->driver.flush_buffer) ++ tty->driver.flush_buffer (tty); ++#endif ++ if (tty->ldisc.flush_buffer) ++ tty->ldisc.flush_buffer (tty); ++ ++ tty->closing = 0; ++ info->event = 0; ++ info->tty = 0; ++ if (tty->ldisc.num != tty_ldisc_get(N_TTY)->num) ++ { ++ if (tty->ldisc.close) ++ (tty->ldisc.close)(tty); ++ tty->ldisc = *tty_ldisc_get(N_TTY); ++ tty->termios->c_line = N_TTY; ++ if (tty->ldisc.open) ++ (tty->ldisc.open)(tty); ++ } ++ if (info->blocked_open) ++ { ++ if (info->close_delay) ++ { ++ current->state = TASK_INTERRUPTIBLE; ++ schedule_timeout(info->close_delay); ++ } ++ wake_up_interruptible (&info->open_wait); ++ } ++ wake_up_interruptible (&info->close_wait); ++ ++ //restore_flags (flags); ++ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags); ++} ++ ++/* ++ * bcm_hangup () --- called by tty_hangup() when a hangup is signaled. ++ */ ++static void bcm_hangup (struct tty_struct *tty) ++{ ++ ++ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; ++ ++ shutdown (info); ++ info->event = 0; ++ info->count = 0; ++ info->tty = 0; ++ wake_up_interruptible (&info->open_wait); ++} ++ ++/* ++ * ------------------------------------------------------------ ++ * rs_open() and friends ++ * ------------------------------------------------------------ ++ */ ++static int block_til_ready (struct tty_struct *tty, struct file *filp, ++ struct bcm_serial *info) ++{ ++ return 0; ++} ++ ++/* ++ * This routine is called whenever a serial port is opened. It ++ * enables interrupts for a serial port. It also performs the ++ * serial-specific initialization for the tty structure. ++ */ ++static int bcm63xx_cons_open (struct tty_struct * tty, struct file * filp) ++{ ++ struct bcm_serial *info; ++ int retval, line; ++ ++ // Make sure we're only opening on of the ports we support ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ++ line = MINOR(tty->driver->cdev.dev) - tty->driver->minor_start; ++#else ++ line = MINOR(tty->device) - tty->driver.minor_start; ++#endif ++ ++ if ((line < 0) || (line >= BCM_NUM_UARTS)) ++ return -ENODEV; ++ ++ info = lines[line]; ++ ++ info->port->intMask = 0; /* Clear any pending interrupts */ ++ info->port->intMask = RXINT; /* Enable RX */ ++ ++ info->count++; ++ tty->driver_data = info; ++ info->tty = tty; ++ BcmHalInterruptEnable (INTERRUPT_ID_UART); ++ ++ // Start up serial port ++ retval = startup (info); ++ if (retval) ++ return retval; ++ ++ retval = block_til_ready (tty, filp, info); ++ if (retval) ++ return retval; ++ ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ++ info->pgrp = process_group(current); ++ info->session = current->signal->session; ++#else ++ info->session = current->session; ++ info->pgrp = current->pgrp; ++#endif ++ ++ return 0; ++} ++ ++/* -------------------------------------------------------------------------- ++ Name: bcm63xx_serialinit ++ Purpose: Initialize our BCM63xx serial driver ++-------------------------------------------------------------------------- */ ++static int __init bcm63xx_serialinit(void) ++{ ++ int i, flags; ++ struct bcm_serial * info; ++ ++ // Print the driver version information ++ printk(VER_STR); ++ ++ memset(&serial_driver, 0, sizeof(struct tty_driver)); ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ++ serial_driver.owner = THIS_MODULE; ++ serial_driver.devfs_name = "tts/"; ++#endif ++ serial_driver.magic = TTY_DRIVER_MAGIC; ++ serial_driver.name = "ttyS"; ++ serial_driver.major = TTY_MAJOR; ++ serial_driver.minor_start = 64; ++ serial_driver.num = BCM_NUM_UARTS; ++ serial_driver.type = TTY_DRIVER_TYPE_SERIAL; ++ serial_driver.subtype = SERIAL_TYPE_NORMAL; ++ serial_driver.init_termios = tty_std_termios; ++ serial_driver.init_termios.c_cflag = B115200 | CS8 | CREAD | CLOCAL; ++ serial_driver.flags = TTY_DRIVER_REAL_RAW; ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ++ serial_driver.refcount = serial_refcount; ++ serial_driver.ttys = serial_table; ++#else ++ serial_driver.refcount = &serial_refcount; ++ serial_driver.table = serial_table; ++#endif ++ ++ serial_driver.termios = serial_termios; ++ serial_driver.termios_locked = serial_termios_locked; ++ serial_driver.open = bcm63xx_cons_open; ++ serial_driver.close = bcm63xx_cons_close; ++ serial_driver.write = bcm63xx_cons_write; ++ serial_driver.flush_chars = bcm63xx_cons_flush_chars; ++ serial_driver.write_room = bcm63xx_cons_write_room; ++ serial_driver.chars_in_buffer = bcm_chars_in_buffer; ++ serial_driver.flush_buffer = bcm_flush_buffer; ++ serial_driver.ioctl = bcm_ioctl; ++ serial_driver.throttle = bcm_throttle; ++ serial_driver.unthrottle = bcm_unthrottle; ++ serial_driver.send_xchar = bcm_send_xchar; ++ serial_driver.set_termios = bcm_set_termios; ++ serial_driver.stop = bcm_stop; ++ serial_driver.start = bcm_start; ++ serial_driver.hangup = bcm_hangup; ++ ++ if (tty_register_driver (&serial_driver)) ++ panic("Couldn't register serial driver\n"); ++ ++ //save_flags(flags); cli(); ++ spin_lock_irqsave(&bcm963xx_serial_lock, flags); ++ ++ for (i = 0; i < BCM_NUM_UARTS; i++) ++ { ++ info = &multi[i]; ++ lines[i] = info; ++ info->port = (Uart *) ((char *)UART_BASE + (i * 0x20)); ++ info->irq = (2 - i) + 8; ++ info->line = i; ++ info->tty = 0; ++ info->close_delay = 50; ++ info->closing_wait = 3000; ++ info->x_char = 0; ++ info->event = 0; ++ info->count = 0; ++ info->blocked_open = 0; ++ info->normal_termios = serial_driver.init_termios; ++ init_waitqueue_head(&info->open_wait); ++ init_waitqueue_head(&info->close_wait); ++ ++ /* If we are pointing to address zero then punt - not correctly ++ * set up in setup.c to handle this. ++ */ ++ if (! info->port) ++ return 0; ++ BcmHalMapInterrupt(bcm_interrupt, 0, INTERRUPT_ID_UART); ++ } ++ ++ /* order matters here... the trick is that flags ++ * is updated... in request_irq - to immediatedly obliterate ++ * it is unwise. ++ */ ++ //restore_flags(flags); ++ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags); ++ return 0; ++} ++ ++module_init(bcm63xx_serialinit); ++ ++/* -------------------------------------------------------------------------- ++ Name: bcm_console_print ++ Purpose: bcm_console_print is registered for printk. ++ The console_lock must be held when we get here. ++-------------------------------------------------------------------------- */ ++static void bcm_console_print (struct console * cons, const char * str, ++ unsigned int count) ++{ ++ unsigned int i; ++ //_puts(str); ++ for(i=0; iindex; ++ return &serial_driver; ++} ++ ++static int __init bcm_console_setup(struct console * co, char * options) ++{ ++ return 0; ++} ++ ++static struct console bcm_sercons = { ++ .name = "ttyS", ++ .write = bcm_console_print, ++ .device = bcm_console_device, ++ .setup = bcm_console_setup, ++ .flags = CON_PRINTBUFFER, // CON_CONSDEV, CONSOLE_LINE, ++ .index = -1, ++}; ++ ++static int __init bcm63xx_console_init(void) ++{ ++ register_console(&bcm_sercons); ++ return 0; ++} ++ ++console_initcall(bcm63xx_console_init); +diff -urN linux.old/bcmdrivers/opensource/char/serial/impl1/Makefile linux.dev/bcmdrivers/opensource/char/serial/impl1/Makefile +--- linux.old/bcmdrivers/opensource/char/serial/impl1/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/bcmdrivers/opensource/char/serial/impl1/Makefile 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,13 @@ ++# File: bcmdrivers/opensource/char/serial ++# ++# Makefile for the BCM63xx serial/console driver ++ ++obj-$(CONFIG_BCM_SERIAL) += bcm63xx_cons.o ++ ++EXTRA_CFLAGS += -I$(INC_BRCMDRIVER_PUB_PATH)/$(BRCM_BOARD) ++ ++-include $(TOPDIR)/Rules.make ++ ++clean: ++ rm -f core *.o *.a *.s ++ +diff -urN linux.old/boardparms/bcm963xx/boardparms.c linux.dev/boardparms/bcm963xx/boardparms.c +--- linux.old/boardparms/bcm963xx/boardparms.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/boardparms/bcm963xx/boardparms.c 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,2392 @@ ++/* ++<:copyright-gpl ++ ++ Copyright 2003 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++ ++:> ++*/ ++/************************************************************************** ++ * File Name : boardparms.c ++ * ++ * Description: This file contains the implementation for the BCM63xx board ++ * parameter access functions. ++ * ++ * Updates : 07/14/2003 Created. ++ ***************************************************************************/ ++ ++/* Includes. */ ++#include ++#include "boardparms.h" ++ ++/* Defines. */ ++ ++/* Default psi size in K bytes */ ++#define BP_PSI_DEFAULT_SIZE 24 ++ ++/* Typedefs */ ++typedef struct boardparameters ++{ ++ char szBoardId[BP_BOARD_ID_LEN]; /* board id string */ ++ ETHERNET_MAC_INFO EnetMacInfos[BP_MAX_ENET_MACS]; ++ VOIP_DSP_INFO VoIPDspInfo[BP_MAX_VOIP_DSP]; ++ unsigned short usSdramSize; /* SDRAM size and type */ ++ unsigned short usPsiSize; /* persistent storage in K bytes */ ++ unsigned short usGpioRj11InnerPair; /* GPIO pin or not defined */ ++ unsigned short usGpioRj11OuterPair; /* GPIO pin or not defined */ ++ unsigned short usGpioPressAndHoldReset; /* GPIO pin or not defined */ ++ unsigned short usGpioPcmciaReset; /* GPIO pin or not defined */ ++ unsigned short usGpioUartRts; /* GPIO pin or not defined */ ++ unsigned short usGpioUartCts; /* GPIO pin or not defined */ ++ unsigned short usGpioLedAdsl; /* GPIO pin or not defined */ ++ unsigned short usGpioLedAdslFail; /* GPIO pin or not defined */ ++ unsigned short usGpioLedWireless; /* GPIO pin or not defined */ ++ unsigned short usGpioLedUsb; /* GPIO pin or not defined */ ++ unsigned short usGpioLedHpna; /* GPIO pin or not defined */ ++ unsigned short usGpioLedWanData; /* GPIO pin or not defined */ ++ unsigned short usGpioLedPpp; /* GPIO pin or not defined */ ++ unsigned short usGpioLedPppFail; /* GPIO pin or not defined */ ++ unsigned short usGpioLedBlPowerOn; /* GPIO pin or not defined */ ++ unsigned short usGpioLedBlAlarm; /* GPIO pin or not defined */ ++ unsigned short usGpioLedBlResetCfg; /* GPIO pin or not defined */ ++ unsigned short usGpioLedBlStop; /* GPIO pin or not defined */ ++ unsigned short usExtIntrWireless; /* ext intr or not defined */ ++ unsigned short usExtIntrAdslDyingGasp; /* ext intr or not defined */ ++ unsigned short usExtIntrHpna; /* ext intr or not defined */ ++ unsigned short usCsHpna; /* chip select not defined */ ++ unsigned short usAntInUseWireless; /* antenna in use or not defined */ ++ unsigned short usGpioSesBtnWireless; /* GPIO pin or not defined */ ++ unsigned short usExtIntrSesBtnWireless; /* ext intr or not defined */ ++ unsigned short usGpioLedSesWireless; /* GPIO pin or not defined */ ++} BOARD_PARAMETERS, *PBOARD_PARAMETERS; ++ ++/* Variables */ ++#if defined(_BCM96338_) || defined(CONFIG_BCM96338) ++static BOARD_PARAMETERS g_bcm96338sv = ++{ ++ "96338SV", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_NOT_DEFINED, /* usGpioLedWanData */ ++ BP_NOT_DEFINED, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */ ++ BP_NOT_DEFINED, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++static BOARD_PARAMETERS g_bcm96338l2m8m = ++{ ++ "96338L-2M-8M", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++static PBOARD_PARAMETERS g_BoardParms[] = ++ {&g_bcm96338sv, &g_bcm96338l2m8m, 0}; ++#endif ++ ++#if defined(_BCM96345_) || defined(CONFIG_BCM96345) ++static BOARD_PARAMETERS g_bcm96345r = ++{ ++ "96345R", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_GPIO_11_AH, /* usGpioRj11InnerPair */ ++ BP_GPIO_12_AH, /* usGpioRj11OuterPair */ ++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_GPIO_8_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_8_AH, /* usGpioLedWanData */ ++ BP_GPIO_9_AH, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_8_AH, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96345gw2 = ++{ ++ /* A hardware jumper determines whether GPIO 13 is used for Press and Hold ++ * Reset or RTS. ++ */ ++ "96345GW2", /* szBoardId */ ++ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_GPIO_0_AH, /* usGpioPhySpiSck */ ++ BP_GPIO_4_AH, /* usGpioPhySpiSs */ ++ BP_GPIO_12_AH, /* usGpioPhySpiMosi */ ++ BP_GPIO_11_AH, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x04, /* numSwitchPorts */ ++ BP_ENET_CONFIG_GPIO, /* usConfigType */ ++ BP_ENET_REVERSE_MII}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_1, /* usExtIntrVoip */ ++ BP_GPIO_6_AH, /* usGpioVoipReset */ ++ BP_GPIO_15_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ ++ BP_GPIO_2_AH, /* usGpioPcmciaReset */ ++ BP_GPIO_13_AH, /* usGpioUartRts */ ++ BP_GPIO_9_AH, /* usGpioUartCts */ ++ BP_GPIO_8_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_GPIO_7_AH, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_8_AH, /* usGpioLedWanData */ ++ BP_NOT_DEFINED, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_7_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_8_AH, /* usGpioLedBlStop */ ++ BP_EXT_INTR_2, /* usExtIntrWireless */ ++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96345gw = ++{ ++ "96345GW", /* szBoardId */ ++ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x04, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_1, /* usExtIntrVoip */ ++ BP_GPIO_6_AH, /* usGpioVoipReset */ ++ BP_GPIO_15_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_GPIO_11_AH, /* usGpioRj11InnerPair */ ++ BP_GPIO_1_AH, /* usGpioRj11OuterPair */ ++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ ++ BP_GPIO_2_AH, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_GPIO_8_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_GPIO_10_AH, /* usGpioLedWireless */ ++ BP_GPIO_7_AH, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_8_AH, /* usGpioLedWanData */ ++ BP_NOT_DEFINED, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_9_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_10_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_8_AH, /* usGpioLedBlStop */ ++ BP_EXT_INTR_2, /* usExtIntrWireless */ ++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ ++ BP_EXT_INTR_3, /* usExtIntrHpna */ ++ BP_CS_1, /* usCsHpna */ ++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96335r = ++{ ++ "96335R", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_14_AH, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_GPIO_9_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_9_AH, /* usGpioLedWanData */ ++ BP_GPIO_8_AH, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_9_AH, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96345r0 = ++{ ++ "96345R0", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_GPIO_8_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_9_AH, /* usGpioLedWanData */ ++ BP_GPIO_9_AH, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_9_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_8_AH, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96345rs = ++{ ++ "96345RS", /* szBoardId */ ++ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_GPIO_11_AH, /* usGpioRj11InnerPair */ ++ BP_GPIO_12_AH, /* usGpioRj11OuterPair */ ++ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_GPIO_8_AH, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_8_AH, /* usGpioLedWanData */ ++ BP_GPIO_9_AH, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ ++ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */ ++ BP_GPIO_8_AH, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static PBOARD_PARAMETERS g_BoardParms[] = ++ {&g_bcm96345r, &g_bcm96345gw2, &g_bcm96345gw, &g_bcm96335r, &g_bcm96345r0, ++ &g_bcm96345rs, 0}; ++#endif ++ ++#if defined(_BCM96348_) || defined(CONFIG_BCM96348) ++ ++static BOARD_PARAMETERS g_bcm96348r = ++{ ++ "96348R", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY}}, /* ucPhyType */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96348lv = ++{ ++ "96348LV", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */ ++ 0x02, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_GPIO_5_AL, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}}, /* usReverseMii */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96348gw = ++{ ++ "96348GW", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x03, /* numSwitchPorts */ ++ BP_ENET_CONFIG_SPI_SSB_0, /* usConfigType */ ++ BP_ENET_REVERSE_MII}}, /* usReverseMii */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_2, /* usExtIntrVoip */ ++ BP_GPIO_6_AH, /* usGpioVoipReset */ ++ BP_GPIO_34_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* BP_GPIO_35_AH, */ /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* BP_EXT_INTR_3, */ /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* BP_GPIO_0_AL */ /* usGpioLedSesWireless */ ++}; ++ ++ ++static BOARD_PARAMETERS g_bcm96348gw_10 = ++{ ++ "96348GW-10", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x03, /* numSwitchPorts */ ++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ ++ BP_ENET_REVERSE_MII}}, /* usReverseMii */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_2, /* usExtIntrVoip */ ++ BP_GPIO_6_AH, /* usGpioVoipReset */ ++ BP_GPIO_34_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96348gw_11 = ++{ ++ "96348GW-11", /* szBoardId */ ++ {{BP_ENET_NO_PHY}, /* ucPhyType */ ++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x04, /* numSwitchPorts */ ++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ ++ BP_ENET_REVERSE_MII}}, /* usReverseMii */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static BOARD_PARAMETERS g_bcm96348sv = ++{ ++ "96348SV", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */ ++ 0x1f, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}}, /* usReverseMii */ ++ {{BP_VOIP_NO_DSP}, /* ucDspType */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_32MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_NOT_DEFINED, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_NOT_DEFINED, /* usGpioLedWanData */ ++ BP_NOT_DEFINED, /* usGpioLedPpp */ ++ BP_NOT_DEFINED, /* usGpioLedPppFail */ ++ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */ ++ BP_NOT_DEFINED, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++ ++static BOARD_PARAMETERS g_bcm96348gw_dualDsp = ++{ ++ "96348GW-DualDSP", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x03, /* numSwitchPorts */ ++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ ++ BP_ENET_REVERSE_MII}}, /* usReverseMii */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_2, /* usExtIntrVoip */ ++ BP_UNEQUIPPED, /* usGpioVoipReset */ ++ BP_GPIO_34_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_DSP, /* ucDspType */ ++ 0x01, /* ucDspAddress */ ++ BP_EXT_INTR_3, /* usExtIntrVoip */ ++ BP_UNEQUIPPED , /* usGpioVoipReset */ ++ BP_GPIO_35_AH, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_3}}, /* usCsVoip */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++ ++static BOARD_PARAMETERS g_bcmCustom_01 = ++{ ++ "BCMCUST_01", /* szBoardId */ ++ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ ++ 0x01, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_MDIO, /* usConfigType */ ++ BP_NOT_DEFINED}, /* usReverseMii */ ++ {BP_ENET_NO_PHY, /* ucPhyType */ ++ 0x00, /* ucPhyAddress */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSck */ ++ BP_NOT_DEFINED, /* usGpioPhySpiSs */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ ++ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ ++ BP_NOT_DEFINED, /* usGpioPhyReset */ ++ 0x01, /* numSwitchPorts */ ++ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ ++ BP_ENET_REVERSE_MII}}, /* usReverseMii */ ++ {{BP_VOIP_DSP, /* ucDspType */ ++ 0x00, /* ucDspAddress */ ++ BP_EXT_INTR_2, /* usExtIntrVoip */ ++ BP_GPIO_36_AH, /* usGpioVoipReset */ ++ BP_GPIO_34_AL, /* usGpioVoipIntr */ ++ BP_NOT_DEFINED, /* usGpioLedVoip */ ++ BP_CS_2}, /* usCsVoip */ ++ {BP_VOIP_NO_DSP}}, /* ucDspType */ ++ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ ++ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ ++ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ ++ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ ++ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ ++ BP_NOT_DEFINED, /* usGpioPcmciaReset */ ++ BP_NOT_DEFINED, /* usGpioUartRts */ ++ BP_NOT_DEFINED, /* usGpioUartCts */ ++ BP_NOT_DEFINED, /* usGpioLedAdsl */ ++ BP_GPIO_2_AL, /* usGpioLedAdslFail */ ++ BP_NOT_DEFINED, /* usGpioLedWireless */ ++ BP_NOT_DEFINED, /* usGpioLedUsb */ ++ BP_NOT_DEFINED, /* usGpioLedHpna */ ++ BP_GPIO_3_AL, /* usGpioLedWanData */ ++ BP_GPIO_3_AL, /* usGpioLedPpp */ ++ BP_GPIO_4_AL, /* usGpioLedPppFail */ ++ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ ++ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ ++ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ ++ BP_GPIO_1_AL, /* usGpioLedBlStop */ ++ BP_NOT_DEFINED, /* usExtIntrWireless */ ++ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ ++ BP_NOT_DEFINED, /* usExtIntrHpna */ ++ BP_NOT_DEFINED, /* usCsHpna */ ++ BP_NOT_DEFINED, /* usAntInUseWireless */ ++ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ ++ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ ++ BP_NOT_DEFINED /* usGpioLedSesWireless */ ++}; ++ ++static PBOARD_PARAMETERS g_BoardParms[] = ++ {&g_bcm96348r, &g_bcm96348lv, &g_bcm96348gw, &g_bcm96348gw_10, ++ &g_bcm96348gw_11, &g_bcm96348sv, &g_bcm96348gw_dualDsp, ++ &g_bcmCustom_01, 0}; ++#endif ++ ++static PBOARD_PARAMETERS g_pCurrentBp = 0; ++ ++/************************************************************************** ++ * Name : bpstrcmp ++ * ++ * Description: String compare for this file so it does not depend on an OS. ++ * (Linux kernel and CFE share this source file.) ++ * ++ * Parameters : [IN] dest - destination string ++ * [IN] src - source string ++ * ++ * Returns : -1 - dest < src, 1 - dest > src, 0 dest == src ++ ***************************************************************************/ ++static int bpstrcmp(const char *dest,const char *src); ++static int bpstrcmp(const char *dest,const char *src) ++{ ++ while (*src && *dest) ++ { ++ if (*dest < *src) return -1; ++ if (*dest > *src) return 1; ++ dest++; ++ src++; ++ } ++ ++ if (*dest && !*src) return 1; ++ if (!*dest && *src) return -1; ++ return 0; ++} /* bpstrcmp */ ++ ++/************************************************************************** ++ * Name : BpGetVoipDspConfig ++ * ++ * Description: Gets the DSP configuration from the board parameter ++ * structure for a given DSP index. ++ * ++ * Parameters : [IN] dspNum - DSP index (number) ++ * ++ * Returns : Pointer to DSP configuration block if found/valid, NULL ++ * otherwise. ++ ***************************************************************************/ ++VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum ); ++VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum ) ++{ ++ VOIP_DSP_INFO *pDspConfig = 0; ++ int i; ++ ++ if( g_pCurrentBp ) ++ { ++ for( i = 0 ; i < BP_MAX_VOIP_DSP ; i++ ) ++ { ++ if( g_pCurrentBp->VoIPDspInfo[i].ucDspType != BP_VOIP_NO_DSP && ++ g_pCurrentBp->VoIPDspInfo[i].ucDspAddress == dspNum ) ++ { ++ pDspConfig = &g_pCurrentBp->VoIPDspInfo[i]; ++ break; ++ } ++ } ++ } ++ ++ return pDspConfig; ++} ++ ++ ++/************************************************************************** ++ * Name : BpSetBoardId ++ * ++ * Description: This function find the BOARD_PARAMETERS structure for the ++ * specified board id string and assigns it to a global, static ++ * variable. ++ * ++ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not ++ * have a board parameters configuration record. ++ ***************************************************************************/ ++int BpSetBoardId( char *pszBoardId ) ++{ ++ int nRet = BP_BOARD_ID_NOT_FOUND; ++ PBOARD_PARAMETERS *ppBp; ++ ++ for( ppBp = g_BoardParms; *ppBp; ppBp++ ) ++ { ++ if( !bpstrcmp((*ppBp)->szBoardId, pszBoardId) ) ++ { ++ g_pCurrentBp = *ppBp; ++ nRet = BP_SUCCESS; ++ break; ++ } ++ } ++ ++ return( nRet ); ++} /* BpSetBoardId */ ++ ++/************************************************************************** ++ * Name : BpGetBoardIds ++ * ++ * Description: This function returns all of the supported board id strings. ++ * ++ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id ++ * strings are returned in. Each id starts at BP_BOARD_ID_LEN ++ * boundary. ++ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that ++ * were allocated in pszBoardIds. ++ * ++ * Returns : Number of board id strings returned. ++ ***************************************************************************/ ++int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize ) ++{ ++ PBOARD_PARAMETERS *ppBp; ++ int i; ++ char *src; ++ char *dest; ++ ++ for( i = 0, ppBp = g_BoardParms; *ppBp && nBoardIdsSize; ++ i++, ppBp++, nBoardIdsSize--, pszBoardIds += BP_BOARD_ID_LEN ) ++ { ++ dest = pszBoardIds; ++ src = (*ppBp)->szBoardId; ++ while( *src ) ++ *dest++ = *src++; ++ *dest = '\0'; ++ } ++ ++ return( i ); ++} /* BpGetBoardIds */ ++ ++/************************************************************************** ++ * Name : BpGetEthernetMacInfo ++ * ++ * Description: This function returns all of the supported board id strings. ++ * ++ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO ++ * buffers. ++ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that ++ * are pointed to by pEnetInfos. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos ) ++{ ++ int i, nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ ) ++ { ++ if( i < BP_MAX_ENET_MACS ) ++ { ++ unsigned char *src = (unsigned char *) ++ &g_pCurrentBp->EnetMacInfos[i]; ++ unsigned char *dest = (unsigned char *) pEnetInfos; ++ int len = sizeof(ETHERNET_MAC_INFO); ++ while( len-- ) ++ *dest++ = *src++; ++ } ++ else ++ pEnetInfos->ucPhyType = BP_ENET_NO_PHY; ++ } ++ ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ ) ++ pEnetInfos->ucPhyType = BP_ENET_NO_PHY; ++ ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetEthernetMacInfo */ ++ ++/************************************************************************** ++ * Name : BpGetSdramSize ++ * ++ * Description: This function returns a constant that describees the board's ++ * SDRAM type and size. ++ * ++ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size ++ * is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetSdramSize( unsigned long *pulSdramSize ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulSdramSize = g_pCurrentBp->usSdramSize; ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ *pulSdramSize = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetSdramSize */ ++ ++/************************************************************************** ++ * Name : BpGetPsiSize ++ * ++ * Description: This function returns the persistent storage size in K bytes. ++ * ++ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent ++ * storage size is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetPsiSize( unsigned long *pulPsiSize ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulPsiSize = g_pCurrentBp->usPsiSize; ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ *pulPsiSize = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetPsiSize */ ++ ++/************************************************************************** ++ * Name : BpGetRj11InnerOuterPairGpios ++ * ++ * Description: This function returns the GPIO pin assignments for changing ++ * between the RJ11 inner pair and RJ11 outer pair. ++ * ++ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair ++ * GPIO pin is returned in. ++ * [OUT] pusOuter - Address of short word that the RJ11 outer pair ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, values are returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner, ++ unsigned short *pusOuter ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusInner = g_pCurrentBp->usGpioRj11InnerPair; ++ *pusOuter = g_pCurrentBp->usGpioRj11OuterPair; ++ ++ if( g_pCurrentBp->usGpioRj11InnerPair != BP_NOT_DEFINED && ++ g_pCurrentBp->usGpioRj11OuterPair != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusInner = *pusOuter = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetRj11InnerOuterPairGpios */ ++ ++/************************************************************************** ++ * Name : BpGetPressAndHoldResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the press ++ * and hold reset button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the press and hold ++ * reset button GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPressAndHoldResetGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioPressAndHoldReset; ++ ++ if( g_pCurrentBp->usGpioPressAndHoldReset != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetPressAndHoldResetGpio */ ++ ++/************************************************************************** ++ * Name : BpGetVoipResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the VOIP ++ * Reset operation. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset ++ * GPIO pin is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); ++ ++ if( pDspInfo ) ++ { ++ *pusValue = pDspInfo->usGpioVoipReset; ++ ++ if( *pusValue != BP_NOT_DEFINED || ++ *pusValue == BP_UNEQUIPPED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_FOUND; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetVoipResetGpio */ ++ ++/************************************************************************** ++ * Name : BpGetVoipIntrGpio ++ * ++ * Description: This function returns the GPIO pin assignment for VoIP interrupt. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt ++ * GPIO pin is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); ++ ++ if( pDspInfo ) ++ { ++ *pusValue = pDspInfo->usGpioVoipIntr; ++ ++ if( *pusValue != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_FOUND; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetVoipIntrGpio */ ++ ++/************************************************************************** ++ * Name : BpGetPcmciaResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PCMCIA ++ * Reset operation. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPcmciaResetGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioPcmciaReset; ++ ++ if( g_pCurrentBp->usGpioPcmciaReset != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetPcmciaResetGpio */ ++ ++/************************************************************************** ++ * Name : BpGetUartRtsCtsGpios ++ * ++ * Description: This function returns the GPIO pin assignments for RTS and CTS ++ * UART signals. ++ * ++ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO ++ * pin is returned in. ++ * [OUT] pusCts - Address of short word that the UART CTS GPIO ++ * pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, values are returned. ++ * BP_BOARD_ID_NOT_SET - Error, board id input string does not ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusRts = g_pCurrentBp->usGpioUartRts; ++ *pusCts = g_pCurrentBp->usGpioUartCts; ++ ++ if( g_pCurrentBp->usGpioUartRts != BP_NOT_DEFINED && ++ g_pCurrentBp->usGpioUartCts != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusRts = *pusCts = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetUartRtsCtsGpios */ ++ ++/************************************************************************** ++ * Name : BpGetAdslLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the ADSL ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedAdsl; ++ ++ if( g_pCurrentBp->usGpioLedAdsl != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetAdslLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetAdslFailLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the ADSL ++ * LED that is used when there is a DSL connection failure. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslFailLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedAdslFail; ++ ++ if( g_pCurrentBp->usGpioLedAdslFail != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetAdslFailLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedWireless; ++ ++ if( g_pCurrentBp->usGpioLedWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetWirelessLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessAntInUse ++ * ++ * Description: This function returns the antennas in use for wireless ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna ++ * is in use. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessAntInUse( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usAntInUseWireless; ++ ++ if( g_pCurrentBp->usAntInUseWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetWirelessAntInUse */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesBtnGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * Ses Button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesBtnGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioSesBtnWireless; ++ ++ if( g_pCurrentBp->usGpioSesBtnWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetWirelessSesBtnGpio */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesExtIntr ++ * ++ * Description: This function returns the external interrupt number for the ++ * Wireless Ses Button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses ++ * external interrup is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesExtIntr( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usExtIntrSesBtnWireless; ++ ++ if( g_pCurrentBp->usExtIntrSesBtnWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++ ++} /* BpGetWirelessSesExtIntr */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * Ses Led. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses ++ * Led GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedSesWireless; ++ ++ if( g_pCurrentBp->usGpioLedSesWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++ ++} /* BpGetWirelessSesLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetUsbLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the USB ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the USB LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetUsbLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedUsb; ++ ++ if( g_pCurrentBp->usGpioLedUsb != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetUsbLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetHpnaLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the HPNA ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedHpna; ++ ++ if( g_pCurrentBp->usGpioLedHpna != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetHpnaLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetWanDataLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the WAN Data ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWanDataLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedWanData; ++ ++ if( g_pCurrentBp->usGpioLedWanData != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetWanDataLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetPppLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PPP ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPppLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedPpp; ++ ++ if( g_pCurrentBp->usGpioLedPpp != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetPppLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetPppFailLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PPP ++ * LED that is used when there is a PPP connection failure. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPppFailLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedPppFail; ++ ++ if( g_pCurrentBp->usGpioLedPppFail != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetPppFailLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetBootloaderPowerOnLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the power ++ * on LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedBlPowerOn; ++ ++ if( g_pCurrentBp->usGpioLedBlPowerOn != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetBootloaderPowerOn */ ++ ++/************************************************************************** ++ * Name : BpGetBootloaderAlarmLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the alarm ++ * LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedBlAlarm; ++ ++ if( g_pCurrentBp->usGpioLedBlAlarm != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetBootloaderAlarmLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetBootloaderResetCfgLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the reset ++ * configuration LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the reset ++ * configuration LED GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedBlResetCfg; ++ ++ if( g_pCurrentBp->usGpioLedBlResetCfg != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetBootloaderResetCfgLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetBootloaderStopLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the break ++ * into bootloader LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the break into ++ * bootloader LED GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderStopLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pusValue = g_pCurrentBp->usGpioLedBlStop; ++ ++ if( g_pCurrentBp->usGpioLedBlStop != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetBootloaderStopLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetVoipLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the VOIP ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ * ++ * Note : The VoIP structure would allow for having one LED per DSP ++ * however, the board initialization function assumes only one ++ * LED per functionality (ie one LED for VoIP). Therefore in ++ * order to keep this tidy and simple we do not make usage of the ++ * one-LED-per-DSP function. Instead, we assume that the LED for ++ * VoIP is unique and associated with DSP 0 (always present on ++ * any VoIP platform). If changing this to a LED-per-DSP function ++ * then one need to update the board initialization driver in ++ * bcmdrivers\opensource\char\board\bcm963xx\impl1 ++ ***************************************************************************/ ++int BpGetVoipLedGpio( unsigned short *pusValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( 0 ); ++ ++ if( pDspInfo ) ++ { ++ *pusValue = pDspInfo->usGpioLedVoip; ++ ++ if( *pusValue != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_FOUND; ++ } ++ } ++ else ++ { ++ *pusValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetVoipLedGpio */ ++ ++/************************************************************************** ++ * Name : BpGetWirelessExtIntr ++ * ++ * Description: This function returns the Wireless external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the wireless ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessExtIntr( unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulValue = g_pCurrentBp->usExtIntrWireless; ++ ++ if( g_pCurrentBp->usExtIntrWireless != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetWirelessExtIntr */ ++ ++/************************************************************************** ++ * Name : BpGetAdslDyingGaspExtIntr ++ * ++ * Description: This function returns the ADSL Dying Gasp external interrupt ++ * number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulValue = g_pCurrentBp->usExtIntrAdslDyingGasp; ++ ++ if( g_pCurrentBp->usExtIntrAdslDyingGasp != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetAdslDyingGaspExtIntr */ ++ ++/************************************************************************** ++ * Name : BpGetVoipExtIntr ++ * ++ * Description: This function returns the VOIP external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the VOIP ++ * external interrupt number is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); ++ ++ if( pDspInfo ) ++ { ++ *pulValue = pDspInfo->usExtIntrVoip; ++ ++ if( *pulValue != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_FOUND; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetVoipExtIntr */ ++ ++/************************************************************************** ++ * Name : BpGetHpnaExtIntr ++ * ++ * Description: This function returns the HPNA external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the HPNA ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaExtIntr( unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulValue = g_pCurrentBp->usExtIntrHpna; ++ ++ if( g_pCurrentBp->usExtIntrHpna != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetHpnaExtIntr */ ++ ++/************************************************************************** ++ * Name : BpGetHpnaChipSelect ++ * ++ * Description: This function returns the HPNA chip select number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the HPNA ++ * chip select number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaChipSelect( unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ *pulValue = g_pCurrentBp->usCsHpna; ++ ++ if( g_pCurrentBp->usCsHpna != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetHpnaChipSelect */ ++ ++/************************************************************************** ++ * Name : BpGetVoipChipSelect ++ * ++ * Description: This function returns the VOIP chip select number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the VOIP ++ * chip select number is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue ) ++{ ++ int nRet; ++ ++ if( g_pCurrentBp ) ++ { ++ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); ++ ++ if( pDspInfo ) ++ { ++ *pulValue = pDspInfo->usCsVoip; ++ ++ if( *pulValue != BP_NOT_DEFINED ) ++ { ++ nRet = BP_SUCCESS; ++ } ++ else ++ { ++ nRet = BP_VALUE_NOT_DEFINED; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_FOUND; ++ } ++ } ++ else ++ { ++ *pulValue = BP_NOT_DEFINED; ++ nRet = BP_BOARD_ID_NOT_SET; ++ } ++ ++ return( nRet ); ++} /* BpGetVoipChipSelect */ ++ +diff -urN linux.old/boardparms/bcm963xx/boardparms.h linux.dev/boardparms/bcm963xx/boardparms.h +--- linux.old/boardparms/bcm963xx/boardparms.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/boardparms/bcm963xx/boardparms.h 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,766 @@ ++/* ++<:copyright-gpl ++ ++ Copyright 2003 Broadcom Corp. All Rights Reserved. ++ ++ This program is free software; you can distribute it and/or modify it ++ under the terms of the GNU General Public License (Version 2) as ++ published by the Free Software Foundation. ++ ++ This program is distributed in the hope it will be useful, but WITHOUT ++ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ for more details. ++ ++ You should have received a copy of the GNU General Public License along ++ with this program; if not, write to the Free Software Foundation, Inc., ++ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++ ++:> ++*/ ++/************************************************************************** ++ * File Name : boardparms.h ++ * ++ * Description: This file contains definitions and function prototypes for ++ * the BCM63xx board parameter access functions. ++ * ++ * Updates : 07/14/2003 Created. ++ ***************************************************************************/ ++ ++#if !defined(_BOARDPARMS_H) ++#define _BOARDPARMS_H ++ ++#if __cplusplus ++extern "C" { ++#endif ++ ++/* Return codes. */ ++#define BP_SUCCESS 0 ++#define BP_BOARD_ID_NOT_FOUND 1 ++#define BP_VALUE_NOT_DEFINED 2 ++#define BP_BOARD_ID_NOT_SET 3 ++ ++/* Values for BpGetSdramSize. */ ++#define BP_MEMORY_8MB_1_CHIP 0 ++#define BP_MEMORY_16MB_1_CHIP 1 ++#define BP_MEMORY_32MB_1_CHIP 2 ++#define BP_MEMORY_64MB_2_CHIP 3 ++#define BP_MEMORY_32MB_2_CHIP 4 ++#define BP_MEMORY_16MB_2_CHIP 5 ++ ++/* Values for EthernetMacInfo PhyType. */ ++#define BP_ENET_NO_PHY 0 ++#define BP_ENET_INTERNAL_PHY 1 ++#define BP_ENET_EXTERNAL_PHY 2 ++#define BP_ENET_EXTERNAL_SWITCH 3 ++ ++/* Values for EthernetMacInfo Configuration type. */ ++#define BP_ENET_CONFIG_MDIO 0 /* Internal PHY, External PHY, Switch+(no GPIO, no SPI, no MDIO Pseudo phy */ ++#define BP_ENET_CONFIG_GPIO 1 /* Bcm96345GW board + Bcm5325M/E */ ++#define BP_ENET_CONFIG_MDIO_PSEUDO_PHY 2 /* Bcm96348GW board + Bcm5325E */ ++#define BP_ENET_CONFIG_SPI_SSB_0 3 /* Bcm96348GW board + Bcm5325M/E */ ++#define BP_ENET_CONFIG_SPI_SSB_1 4 /* Bcm96348GW board + Bcm5325M/E */ ++#define BP_ENET_CONFIG_SPI_SSB_2 5 /* Bcm96348GW board + Bcm5325M/E */ ++#define BP_ENET_CONFIG_SPI_SSB_3 6 /* Bcm96348GW board + Bcm5325M/E */ ++ ++/* Values for EthernetMacInfo Reverse MII. */ ++#define BP_ENET_NO_REVERSE_MII 0 ++#define BP_ENET_REVERSE_MII 1 ++ ++/* Values for VoIPDSPInfo DSPType. */ ++#define BP_VOIP_NO_DSP 0 ++#define BP_VOIP_DSP 1 ++ ++ ++/* Values for GPIO pin assignments (AH = Active High, AL = Active Low). */ ++#define BP_ACTIVE_MASK 0x8000 ++#define BP_ACTIVE_HIGH 0x0000 ++#define BP_ACTIVE_LOW 0x8000 ++#define BP_GPIO_0_AH (0 | BP_ACTIVE_HIGH) ++#define BP_GPIO_0_AL (0 | BP_ACTIVE_LOW) ++#define BP_GPIO_1_AH (1 | BP_ACTIVE_HIGH) ++#define BP_GPIO_1_AL (1 | BP_ACTIVE_LOW) ++#define BP_GPIO_2_AH (2 | BP_ACTIVE_HIGH) ++#define BP_GPIO_2_AL (2 | BP_ACTIVE_LOW) ++#define BP_GPIO_3_AH (3 | BP_ACTIVE_HIGH) ++#define BP_GPIO_3_AL (3 | BP_ACTIVE_LOW) ++#define BP_GPIO_4_AH (4 | BP_ACTIVE_HIGH) ++#define BP_GPIO_4_AL (4 | BP_ACTIVE_LOW) ++#define BP_GPIO_5_AH (5 | BP_ACTIVE_HIGH) ++#define BP_GPIO_5_AL (5 | BP_ACTIVE_LOW) ++#define BP_GPIO_6_AH (6 | BP_ACTIVE_HIGH) ++#define BP_GPIO_6_AL (6 | BP_ACTIVE_LOW) ++#define BP_GPIO_7_AH (7 | BP_ACTIVE_HIGH) ++#define BP_GPIO_7_AL (7 | BP_ACTIVE_LOW) ++#define BP_GPIO_8_AH (8 | BP_ACTIVE_HIGH) ++#define BP_GPIO_8_AL (8 | BP_ACTIVE_LOW) ++#define BP_GPIO_9_AH (9 | BP_ACTIVE_HIGH) ++#define BP_GPIO_9_AL (9 | BP_ACTIVE_LOW) ++#define BP_GPIO_10_AH (10 | BP_ACTIVE_HIGH) ++#define BP_GPIO_10_AL (10 | BP_ACTIVE_LOW) ++#define BP_GPIO_11_AH (11 | BP_ACTIVE_HIGH) ++#define BP_GPIO_11_AL (11 | BP_ACTIVE_LOW) ++#define BP_GPIO_12_AH (12 | BP_ACTIVE_HIGH) ++#define BP_GPIO_12_AL (12 | BP_ACTIVE_LOW) ++#define BP_GPIO_13_AH (13 | BP_ACTIVE_HIGH) ++#define BP_GPIO_13_AL (13 | BP_ACTIVE_LOW) ++#define BP_GPIO_14_AH (14 | BP_ACTIVE_HIGH) ++#define BP_GPIO_14_AL (14 | BP_ACTIVE_LOW) ++#define BP_GPIO_15_AH (15 | BP_ACTIVE_HIGH) ++#define BP_GPIO_15_AL (15 | BP_ACTIVE_LOW) ++#define BP_GPIO_16_AH (16 | BP_ACTIVE_HIGH) ++#define BP_GPIO_16_AL (16 | BP_ACTIVE_LOW) ++#define BP_GPIO_17_AH (17 | BP_ACTIVE_HIGH) ++#define BP_GPIO_17_AL (17 | BP_ACTIVE_LOW) ++#define BP_GPIO_18_AH (18 | BP_ACTIVE_HIGH) ++#define BP_GPIO_18_AL (18 | BP_ACTIVE_LOW) ++#define BP_GPIO_19_AH (19 | BP_ACTIVE_HIGH) ++#define BP_GPIO_19_AL (19 | BP_ACTIVE_LOW) ++#define BP_GPIO_20_AH (20 | BP_ACTIVE_HIGH) ++#define BP_GPIO_20_AL (20 | BP_ACTIVE_LOW) ++#define BP_GPIO_21_AH (21 | BP_ACTIVE_HIGH) ++#define BP_GPIO_21_AL (21 | BP_ACTIVE_LOW) ++#define BP_GPIO_22_AH (22 | BP_ACTIVE_HIGH) ++#define BP_GPIO_22_AL (22 | BP_ACTIVE_LOW) ++#define BP_GPIO_23_AH (23 | BP_ACTIVE_HIGH) ++#define BP_GPIO_23_AL (23 | BP_ACTIVE_LOW) ++#define BP_GPIO_24_AH (24 | BP_ACTIVE_HIGH) ++#define BP_GPIO_24_AL (24 | BP_ACTIVE_LOW) ++#define BP_GPIO_25_AH (25 | BP_ACTIVE_HIGH) ++#define BP_GPIO_25_AL (25 | BP_ACTIVE_LOW) ++#define BP_GPIO_26_AH (26 | BP_ACTIVE_HIGH) ++#define BP_GPIO_26_AL (26 | BP_ACTIVE_LOW) ++#define BP_GPIO_27_AH (27 | BP_ACTIVE_HIGH) ++#define BP_GPIO_27_AL (27 | BP_ACTIVE_LOW) ++#define BP_GPIO_28_AH (28 | BP_ACTIVE_HIGH) ++#define BP_GPIO_28_AL (28 | BP_ACTIVE_LOW) ++#define BP_GPIO_29_AH (29 | BP_ACTIVE_HIGH) ++#define BP_GPIO_29_AL (29 | BP_ACTIVE_LOW) ++#define BP_GPIO_30_AH (30 | BP_ACTIVE_HIGH) ++#define BP_GPIO_30_AL (30 | BP_ACTIVE_LOW) ++#define BP_GPIO_31_AH (31 | BP_ACTIVE_HIGH) ++#define BP_GPIO_31_AL (31 | BP_ACTIVE_LOW) ++#define BP_GPIO_32_AH (32 | BP_ACTIVE_HIGH) ++#define BP_GPIO_32_AL (32 | BP_ACTIVE_LOW) ++#define BP_GPIO_33_AH (33 | BP_ACTIVE_HIGH) ++#define BP_GPIO_33_AL (33 | BP_ACTIVE_LOW) ++#define BP_GPIO_34_AH (34 | BP_ACTIVE_HIGH) ++#define BP_GPIO_34_AL (34 | BP_ACTIVE_LOW) ++#define BP_GPIO_35_AH (35 | BP_ACTIVE_HIGH) ++#define BP_GPIO_35_AL (35 | BP_ACTIVE_LOW) ++#define BP_GPIO_36_AH (36 | BP_ACTIVE_HIGH) ++#define BP_GPIO_36_AL (36 | BP_ACTIVE_LOW) ++ ++/* Values for external interrupt assignments. */ ++#define BP_EXT_INTR_0 0 ++#define BP_EXT_INTR_1 1 ++#define BP_EXT_INTR_2 2 ++#define BP_EXT_INTR_3 3 ++ ++/* Values for chip select assignments. */ ++#define BP_CS_0 0 ++#define BP_CS_1 1 ++#define BP_CS_2 2 ++#define BP_CS_3 3 ++ ++/* Value for GPIO and external interrupt fields that are not used. */ ++#define BP_NOT_DEFINED 0xffff ++#define BP_HW_DEFINED 0xfff0 ++#define BP_UNEQUIPPED 0xfff1 ++ ++/* Maximum size of the board id string. */ ++#define BP_BOARD_ID_LEN 16 ++ ++/* Maximum number of Ethernet MACs. */ ++#define BP_MAX_ENET_MACS 2 ++ ++/* Maximum number of VoIP DSPs. */ ++#define BP_MAX_VOIP_DSP 2 ++ ++/* Wireless Antenna Settings. */ ++#define BP_WLAN_ANT_MAIN 0 ++#define BP_WLAN_ANT_AUX 1 ++#define BP_WLAN_ANT_BOTH 3 ++ ++#if !defined(__ASSEMBLER__) ++ ++/* Information about an Ethernet MAC. If ucPhyType is BP_ENET_NO_PHY, ++ * then the other fields are not valid. ++ */ ++typedef struct EthernetMacInfo ++{ ++ unsigned char ucPhyType; /* BP_ENET_xxx */ ++ unsigned char ucPhyAddress; /* 0 to 31 */ ++ unsigned short usGpioPhySpiSck; /* GPIO pin or not defined */ ++ unsigned short usGpioPhySpiSs; /* GPIO pin or not defined */ ++ unsigned short usGpioPhySpiMosi; /* GPIO pin or not defined */ ++ unsigned short usGpioPhySpiMiso; /* GPIO pin or not defined */ ++ unsigned short usGpioPhyReset; /* GPIO pin or not defined (96348LV) */ ++ unsigned short numSwitchPorts; /* Number of PHY ports */ ++ unsigned short usConfigType; /* Configuration type */ ++ unsigned short usReverseMii; /* Reverse MII */ ++} ETHERNET_MAC_INFO, *PETHERNET_MAC_INFO; ++ ++ ++/* Information about VoIP DSPs. If ucDspType is BP_VOIP_NO_DSP, ++ * then the other fields are not valid. ++ */ ++typedef struct VoIPDspInfo ++{ ++ unsigned char ucDspType; ++ unsigned char ucDspAddress; ++ unsigned short usExtIntrVoip; ++ unsigned short usGpioVoipReset; ++ unsigned short usGpioVoipIntr; ++ unsigned short usGpioLedVoip; ++ unsigned short usCsVoip; ++ ++} VOIP_DSP_INFO; ++ ++ ++/************************************************************************** ++ * Name : BpSetBoardId ++ * ++ * Description: This function find the BOARD_PARAMETERS structure for the ++ * specified board id string and assigns it to a global, static ++ * variable. ++ * ++ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not ++ * have a board parameters configuration record. ++ ***************************************************************************/ ++int BpSetBoardId( char *pszBoardId ); ++ ++/************************************************************************** ++ * Name : BpGetBoardIds ++ * ++ * Description: This function returns all of the supported board id strings. ++ * ++ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id ++ * strings are returned in. Each id starts at BP_BOARD_ID_LEN ++ * boundary. ++ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that ++ * were allocated in pszBoardIds. ++ * ++ * Returns : Number of board id strings returned. ++ ***************************************************************************/ ++int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize ); ++ ++/************************************************************************** ++ * Name : BpGetEthernetMacInfo ++ * ++ * Description: This function returns all of the supported board id strings. ++ * ++ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO ++ * buffers. ++ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that ++ * are pointed to by pEnetInfos. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos ); ++ ++/************************************************************************** ++ * Name : BpGetSdramSize ++ * ++ * Description: This function returns a constant that describees the board's ++ * SDRAM type and size. ++ * ++ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size ++ * is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetSdramSize( unsigned long *pulSdramSize ); ++ ++/************************************************************************** ++ * Name : BpGetPsiSize ++ * ++ * Description: This function returns the persistent storage size in K bytes. ++ * ++ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent ++ * storage size is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ ***************************************************************************/ ++int BpGetPsiSize( unsigned long *pulPsiSize ); ++ ++/************************************************************************** ++ * Name : BpGetRj11InnerOuterPairGpios ++ * ++ * Description: This function returns the GPIO pin assignments for changing ++ * between the RJ11 inner pair and RJ11 outer pair. ++ * ++ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair ++ * GPIO pin is returned in. ++ * [OUT] pusOuter - Address of short word that the RJ11 outer pair ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, values are returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner, ++ unsigned short *pusOuter ); ++ ++/************************************************************************** ++ * Name : BpGetPressAndHoldResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the press ++ * and hold reset button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the press and hold ++ * reset button GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPressAndHoldResetGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetVoipResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the VOIP ++ * Reset operation. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset ++ * GPIO pin is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetVoipIntrGpio ++ * ++ * Description: This function returns the GPIO pin assignment for VoIP interrupt. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt ++ * GPIO pin is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetPcmciaResetGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PCMCIA ++ * Reset operation. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPcmciaResetGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetUartRtsCtsGpios ++ * ++ * Description: This function returns the GPIO pin assignments for RTS and CTS ++ * UART signals. ++ * ++ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO ++ * pin is returned in. ++ * [OUT] pusCts - Address of short word that the UART CTS GPIO ++ * pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, values are returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts ); ++ ++/************************************************************************** ++ * Name : BpGetAdslLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the ADSL ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetAdslFailLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the ADSL ++ * LED that is used when there is a DSL connection failure. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslFailLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessAntInUse ++ * ++ * Description: This function returns the antennas in use for wireless ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna ++ * is in use. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessAntInUse( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesBtnGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * Ses Button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses ++ * Button GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesBtnGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesExtIntr ++ * ++ * Description: This function returns the external interrupt number for the ++ * Wireless Ses Button. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses ++ * external interrup is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesExtIntr( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessSesLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the Wireless ++ * Ses Led. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses ++ * Led GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessSesLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetUsbLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the USB ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the USB LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetUsbLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetHpnaLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the HPNA ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWanDataLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the WAN Data ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWanDataLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetPppLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PPP ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPppLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetPppFailLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the PPP ++ * LED that is used when there is a PPP connection failure. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the PPP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetPppFailLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetVoipLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the VOIP ++ * LED. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetBootloaderPowerOnLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the power ++ * on LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetBootloaderAlarmLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the alarm ++ * LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the alarm LED ++ * GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetBootloaderResetCfgLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the reset ++ * configuration LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the reset ++ * configuration LED GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetBootloaderStopLedGpio ++ * ++ * Description: This function returns the GPIO pin assignment for the break ++ * into bootloader LED that is set by the bootloader. ++ * ++ * Parameters : [OUT] pusValue - Address of short word that the break into ++ * bootloader LED GPIO pin is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetBootloaderStopLedGpio( unsigned short *pusValue ); ++ ++/************************************************************************** ++ * Name : BpGetWirelessExtIntr ++ * ++ * Description: This function returns the Wireless external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the wireless ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetWirelessExtIntr( unsigned long *pulValue ); ++ ++/************************************************************************** ++ * Name : BpGetAdslDyingGaspExtIntr ++ * ++ * Description: This function returns the ADSL Dying Gasp external interrupt ++ * number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue ); ++ ++/************************************************************************** ++ * Name : BpGetVoipExtIntr ++ * ++ * Description: This function returns the VOIP external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the VOIP ++ * external interrupt number is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue ); ++ ++/************************************************************************** ++ * Name : BpGetHpnaExtIntr ++ * ++ * Description: This function returns the HPNA external interrupt number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the HPNA ++ * external interrupt number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaExtIntr( unsigned long *pulValue ); ++ ++/************************************************************************** ++ * Name : BpGetHpnaChipSelect ++ * ++ * Description: This function returns the HPNA chip select number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the HPNA ++ * chip select number is returned in. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetHpnaChipSelect( unsigned long *pulValue ); ++ ++/************************************************************************** ++ * Name : BpGetVoipChipSelect ++ * ++ * Description: This function returns the VOIP chip select number. ++ * ++ * Parameters : [OUT] pulValue - Address of short word that the VOIP ++ * chip select number is returned in. ++ * [IN] dspNum - Address of the DSP to query. ++ * ++ * Returns : BP_SUCCESS - Success, value is returned. ++ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. ++ * BP_VALUE_NOT_DEFINED - At least one return value is not defined ++ * for the board. ++ ***************************************************************************/ ++int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue ); ++ ++#endif /* __ASSEMBLER__ */ ++ ++#if __cplusplus ++} ++#endif ++ ++#endif /* _BOARDPARMS_H */ ++ +diff -urN linux.old/boardparms/bcm963xx/Makefile linux.dev/boardparms/bcm963xx/Makefile +--- linux.old/boardparms/bcm963xx/Makefile 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/boardparms/bcm963xx/Makefile 2006-08-25 00:39:38.000000000 +0200 +@@ -0,0 +1,16 @@ ++ ++ifeq ($(CONFIG_MIPS_BRCM),y) ++ ++# Linux ++obj-y += boardparms.o ++EXTRA_CFLAGS += -DCONFIG_BCM9$(BRCM_CHIP) ++-include $(TOPDIR)/Rules.make ++ ++else ++ ++# CFE ++BSPOBJS += boardparms.o ++ ++endif ++ ++ +diff -urN linux.old/include/asm-mips/bootinfo.h linux.dev/include/asm-mips/bootinfo.h +--- linux.old/include/asm-mips/bootinfo.h 2006-08-25 00:43:22.000000000 +0200 ++++ linux.dev/include/asm-mips/bootinfo.h 2006-08-25 00:39:38.000000000 +0200 +@@ -218,6 +218,14 @@ + #define MACH_GROUP_TITAN 22 /* PMC-Sierra Titan */ + #define MACH_TITAN_YOSEMITE 1 /* PMC-Sierra Yosemite */ + ++/* ++ * Valid machtype for group BRCM ++ */ ++#define MACH_GROUP_BRCM 23 /* Broadcom boards */ ++#define MACH_BCM96338 0 ++#define MACH_BCM96345 1 ++#define MACH_BCM96348 2 ++ + #define CL_SIZE COMMAND_LINE_SIZE + + const char *get_system_type(void); +diff -urN linux.old/include/asm-mips/cpu.h linux.dev/include/asm-mips/cpu.h +--- linux.old/include/asm-mips/cpu.h 2006-08-25 00:43:22.000000000 +0200 ++++ linux.dev/include/asm-mips/cpu.h 2006-08-25 00:39:38.000000000 +0200 +@@ -103,6 +103,13 @@ + + #define PRID_IMP_SR71000 0x0400 + ++/* These are the PRID's for when 23:16 == PRID_COMP_BROADCOM ++ */ ++ ++#define PRID_IMP_BCM6338 0x9000 ++#define PRID_IMP_BCM6345 0x8000 ++#define PRID_IMP_BCM6348 0x9100 ++ + /* + * Definitions for 7:0 on legacy processors + */ +@@ -200,7 +207,10 @@ + #define CPU_SB1A 62 + #define CPU_74K 63 + #define CPU_R14000 64 +-#define CPU_LAST 64 ++#define CPU_BCM6338 65 ++#define CPU_BCM6345 66 ++#define CPU_BCM6348 67 ++#define CPU_LAST 67 + + /* + * ISA Level encodings +diff -urN linux.old/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h linux.dev/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h +--- linux.old/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h 1970-01-01 01:00:00.000000000 +0100 ++++ linux.dev/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h 2006-08-25 11:27:40.000000000 +0200 +@@ -0,0 +1,36 @@ ++#ifndef __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H ++#define __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H ++ ++#define cpu_has_tlb 1 ++#define cpu_has_4kex 4 ++#define cpu_has_4ktlb 8 ++#define cpu_has_fpu 0 ++#define cpu_has_32fpr 0 ++#define cpu_has_counter 0x40 ++#define cpu_has_watch 0 ++#define cpu_has_mips16 0 ++#define cpu_has_divec 0x200 ++#define cpu_has_vce 0 ++#define cpu_has_cache_cdex_p 0 ++#define cpu_has_cache_cdex_s 0 ++#define cpu_has_prefetch 0x40000 ++#define cpu_has_mcheck 0x2000 ++#define cpu_has_ejtag 0x4000 ++#define cpu_has_llsc 0x10000 ++#define cpu_has_vtag_icache 0 ++#define cpu_has_dc_aliases 0 ++#define cpu_has_ic_fills_f_dc 0 ++ ++#define cpu_has_nofpuex 0 ++#define cpu_has_64bits 0 ++#define cpu_has_64bit_zero_reg 0 ++#define cpu_has_64bit_gp_regs 0 ++#define cpu_has_64bit_addresses 0 ++ ++#define cpu_has_subset_pcaches 0 ++ ++#define cpu_dcache_line_size() 16 ++#define cpu_icache_line_size() 16 ++#define cpu_scache_line_size() 0 ++ ++#endif /* __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H */ +diff -urN linux.old/include/asm-mips/mach-generic/param.h linux.dev/include/asm-mips/mach-generic/param.h +--- linux.old/include/asm-mips/mach-generic/param.h 2006-08-25 00:43:22.000000000 +0200 ++++ linux.dev/include/asm-mips/mach-generic/param.h 2006-08-25 00:39:38.000000000 +0200 +@@ -8,6 +8,6 @@ + #ifndef __ASM_MACH_GENERIC_PARAM_H + #define __ASM_MACH_GENERIC_PARAM_H + +-#define HZ 1000 /* Internal kernel timer frequency */ ++#define HZ 200 /* Internal kernel timer frequency */ + + #endif /* __ASM_MACH_GENERIC_PARAM_H */ +diff -urN linux.old/include/asm-mips/module.h linux.dev/include/asm-mips/module.h +--- linux.old/include/asm-mips/module.h 2006-08-25 00:43:22.000000000 +0200 ++++ linux.dev/include/asm-mips/module.h 2006-08-25 00:39:38.000000000 +0200 +@@ -113,6 +113,12 @@ + #define MODULE_PROC_FAMILY "RM9000 " + #elif defined CONFIG_CPU_SB1 + #define MODULE_PROC_FAMILY "SB1 " ++#elif defined CONFIG_CPU_BCM6338 ++#define MODULE_PROC_FAMILY "BCM6338 " ++#elif defined CONFIG_CPU_BCM6345 ++#define MODULE_PROC_FAMILY "BCM6345 " ++#elif defined CONFIG_CPU_BCM6348 ++#define MODULE_PROC_FAMILY "BCM6348 " + #else + #error MODULE_PROC_FAMILY undefined for your processor configuration + #endif diff --git a/openwrt/target/linux/brcm63xx-2.6/patches/001-brcm_boards.patch b/openwrt/target/linux/brcm63xx-2.6/patches/001-brcm_boards.patch deleted file mode 100644 index 9e66798985..0000000000 --- a/openwrt/target/linux/brcm63xx-2.6/patches/001-brcm_boards.patch +++ /dev/null @@ -1,9249 +0,0 @@ -diff -urN linux-2.6.17/arch/mips/brcm-boards/bcm963xx/bcm63xx_flash.c linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/bcm63xx_flash.c ---- linux-2.6.17/arch/mips/brcm-boards/bcm963xx/bcm63xx_flash.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/bcm63xx_flash.c 2006-08-03 16:36:58.000000000 +0200 -@@ -0,0 +1,775 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+/* -+ *************************************************************************** -+ * File Name : bcm63xx_flash.c -+ * -+ * Description: This file contains the flash device driver APIs for bcm63xx board. -+ * -+ * Created on : 8/10/2002 seanl: use cfiflash.c, cfliflash.h (AMD specific) -+ * -+ ***************************************************************************/ -+ -+ -+/* Includes. */ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#define BCMTAG_EXE_USE -+#include -+#include "cfiflash.h" -+#include "boardparms.h" -+ -+//#define DEBUG_FLASH -+ -+static FLASH_ADDR_INFO fInfo; -+static int flashInitialized = 0; -+ -+void *retriedKmalloc(size_t size) -+{ -+ void *pBuf; -+ int tryCount = 0; -+ -+ // try 1000 times before quit -+ while (((pBuf = kmalloc(size, GFP_KERNEL)) == NULL) && (tryCount++ < 1000)) -+ { -+ current->state = TASK_INTERRUPTIBLE; -+ schedule_timeout(HZ/10); -+ } -+ if (tryCount >= 1000) -+ pBuf = NULL; -+ else -+ memset(pBuf, 0, size); -+ -+ return pBuf; -+} -+ -+void retriedKfree(void *pBuf) -+{ -+ kfree(pBuf); -+} -+ -+/*************************************************************************** -+// Function Name: getCrc32 -+// Description : caculate the CRC 32 of the given data. -+// Parameters : pdata - array of data. -+// size - number of input data bytes. -+// crc - either CRC32_INIT_VALUE or previous return value. -+// Returns : crc. -+****************************************************************************/ -+UINT32 getCrc32(byte *pdata, UINT32 size, UINT32 crc) -+{ -+ while (size-- > 0) -+ crc = (crc >> 8) ^ Crc32_table[(crc ^ *pdata++) & 0xff]; -+ -+ return crc; -+} -+ -+// get the nvram start addr -+// -+unsigned long get_nvram_start_addr(void) -+{ -+ return ((unsigned long) -+ (flash_get_memptr(fInfo.flash_nvram_start_blk) + fInfo.flash_nvram_blk_offset)); -+} -+ -+// get the scratch_pad start addr -+// -+unsigned long get_scratch_pad_start_addr(void) -+{ -+ return ((unsigned long) -+ (flash_get_memptr(fInfo.flash_scratch_pad_start_blk) + fInfo.flash_scratch_pad_blk_offset)); -+} -+ -+ -+ -+/* ********************************************************************* -+ * kerSysImageTagGet() -+ * Get the image tag -+ * Input parameters: -+ * none -+ * Return value: -+ * point to tag -- Found -+ * NULL -- failed -+ ********************************************************************* */ -+PFILE_TAG kerSysImageTagGet(void) -+{ -+ int i; -+ int totalBlks = flash_get_numsectors(); -+ UINT32 crc; -+ unsigned char *sectAddr; -+ PFILE_TAG pTag; -+ -+#if defined(DEBUG_FLASH) -+ printk("totalblks in tagGet=%d\n", totalBlks); -+#endif -+ -+ // start from 2nd blk, assume 1st one is always CFE -+ for (i = 1; i < totalBlks; i++) -+ { -+ sectAddr = flash_get_memptr((byte) i); -+ crc = CRC32_INIT_VALUE; -+ crc = getCrc32(sectAddr, (UINT32)TAG_LEN-TOKEN_LEN, crc); -+ pTag = (PFILE_TAG) sectAddr; -+ -+#if defined(DEBUG_FLASH) -+ printk("Check Tag crc on blk [%d]\n", i); -+#endif -+ -+ if (crc == (UINT32)(*(UINT32*)(pTag->tagValidationToken))) -+ return pTag; -+ } -+ -+ return (PFILE_TAG) NULL; -+} -+ -+// Initialize the flash and fill out the fInfo structure -+void kerSysFlashInit( void ) -+{ -+ int i = 0; -+ int totalBlks = 0; -+ int totalSize = 0; -+ int startAddr = 0; -+ int usedBlkSize = 0; -+ NVRAM_DATA nvramData; -+ UINT32 crc = CRC32_INIT_VALUE, savedCrc; -+ PFILE_TAG pTag = NULL; -+ unsigned long kernelEndAddr = 0; -+ unsigned long spAddr = 0; -+ -+ if (flashInitialized) -+ return; -+ -+ flashInitialized = 1; -+ flash_init(); -+ -+ totalBlks = flash_get_numsectors(); -+ totalSize = flash_get_total_size(); -+ -+ printk("Total Flash size: %dK with %d sectors\n", totalSize/1024, totalBlks); -+ -+ /* nvram is always at the end of flash */ -+ fInfo.flash_nvram_length = FLASH45_LENGTH_NVRAM; -+ fInfo.flash_nvram_start_blk = 0; /* always the first block */ -+ fInfo.flash_nvram_number_blk = 1; /*always fits in the first block */ -+ fInfo.flash_nvram_blk_offset = NVRAM_DATA_OFFSET; -+ -+ // check nvram CRC -+ memcpy((char *)&nvramData, (char *)get_nvram_start_addr(), sizeof(NVRAM_DATA)); -+ savedCrc = nvramData.ulCheckSum; -+ nvramData.ulCheckSum = 0; -+ crc = getCrc32((char *)&nvramData, (UINT32) sizeof(NVRAM_DATA), crc); -+ -+ BpSetBoardId( nvramData.szBoardId ); -+ -+ fInfo.flash_persistent_length = NVRAM_PSI_DEFAULT; -+ if (savedCrc != crc) -+ { -+ printk("***Board is not initialized****: Using the default PSI size: %d\n", -+ fInfo.flash_persistent_length); -+ } -+ else -+ { -+ unsigned long ulPsiSize; -+ if( BpGetPsiSize( &ulPsiSize ) == BP_SUCCESS ) -+ fInfo.flash_persistent_length = ulPsiSize; -+ else -+ { -+ printk("***Board id is not set****: Using the default PSI size: %d\n", -+ fInfo.flash_persistent_length); -+ } -+ } -+ -+ fInfo.flash_persistent_length *= ONEK; -+ startAddr = totalSize - fInfo.flash_persistent_length; -+ fInfo.flash_persistent_start_blk = flash_get_blk(startAddr+FLASH_BASE_ADDR_REG); -+ fInfo.flash_persistent_number_blk = totalBlks - fInfo.flash_persistent_start_blk; -+ // save abs SP address (Scratch Pad). it is before PSI -+ spAddr = startAddr - SP_MAX_LEN ; -+ // find out the offset in the start_blk -+ usedBlkSize = 0; -+ for (i = fInfo.flash_persistent_start_blk; -+ i < (fInfo.flash_persistent_start_blk + fInfo.flash_persistent_number_blk); i++) -+ { -+ usedBlkSize += flash_get_sector_size((byte) i); -+ } -+ fInfo.flash_persistent_blk_offset = usedBlkSize - fInfo.flash_persistent_length; -+ -+ // get the info for sp -+ if (!(pTag = kerSysImageTagGet())) -+ { -+ printk("Failed to read image tag from flash\n"); -+ return; -+ } -+ kernelEndAddr = (unsigned long) simple_strtoul(pTag->kernelAddress, NULL, 10) + \ -+ (unsigned long) simple_strtoul(pTag->kernelLen, NULL, 10); -+ -+ // make suer sp does not share kernel block -+ fInfo.flash_scratch_pad_start_blk = flash_get_blk(spAddr+FLASH_BASE_ADDR_REG); -+ if (fInfo.flash_scratch_pad_start_blk != flash_get_blk(kernelEndAddr)) -+ { -+ fInfo.flash_scratch_pad_length = SP_MAX_LEN; -+ if (fInfo.flash_persistent_start_blk == fInfo.flash_scratch_pad_start_blk) // share blk -+ { -+#if 1 /* do not used scratch pad unless it's in its own sector */ -+ printk("Scratch pad is not used for this flash part.\n"); -+ fInfo.flash_scratch_pad_length = 0; // no sp -+#else /* allow scratch pad to share a sector with another section such as PSI */ -+ fInfo.flash_scratch_pad_number_blk = 1; -+ fInfo.flash_scratch_pad_blk_offset = fInfo.flash_persistent_blk_offset - fInfo.flash_scratch_pad_length; -+#endif -+ } -+ else // on different blk -+ { -+ fInfo.flash_scratch_pad_number_blk = fInfo.flash_persistent_start_blk\ -+ - fInfo.flash_scratch_pad_start_blk; -+ // find out the offset in the start_blk -+ usedBlkSize = 0; -+ for (i = fInfo.flash_scratch_pad_start_blk; -+ i < (fInfo.flash_scratch_pad_start_blk + fInfo.flash_scratch_pad_number_blk); i++) -+ usedBlkSize += flash_get_sector_size((byte) i); -+ fInfo.flash_scratch_pad_blk_offset = usedBlkSize - fInfo.flash_scratch_pad_length; -+ } -+ } -+ else -+ { -+ printk("No flash for scratch pad!\n"); -+ fInfo.flash_scratch_pad_length = 0; // no sp -+ } -+ -+#if defined(DEBUG_FLASH) -+ printk("fInfo.flash_scratch_pad_start_blk = %d\n", fInfo.flash_scratch_pad_start_blk); -+ printk("fInfo.flash_scratch_pad_number_blk = %d\n", fInfo.flash_scratch_pad_number_blk); -+ printk("fInfo.flash_scratch_pad_length = 0x%x\n", fInfo.flash_scratch_pad_length); -+ printk("fInfo.flash_scratch_pad_blk_offset = 0x%x\n", (unsigned int)fInfo.flash_scratch_pad_blk_offset); -+ -+ printk("fInfo.flash_nvram_start_blk = %d\n", fInfo.flash_nvram_start_blk); -+ printk("fInfo.flash_nvram_blk_offset = 0x%x\n", (unsigned int)fInfo.flash_nvram_blk_offset); -+ printk("fInfo.flash_nvram_number_blk = %d\n", fInfo.flash_nvram_number_blk); -+ -+ printk("psi startAddr = %x\n", startAddr+FLASH_BASE_ADDR_REG); -+ printk("fInfo.flash_persistent_start_blk = %d\n", fInfo.flash_persistent_start_blk); -+ printk("fInfo.flash_persistent_blk_offset = 0x%x\n", (unsigned int)fInfo.flash_persistent_blk_offset); -+ printk("fInfo.flash_persistent_number_blk = %d\n", fInfo.flash_persistent_number_blk); -+#endif -+ -+} -+ -+ -+ -+/*********************************************************************** -+ * Function Name: kerSysFlashAddrInfoGet -+ * Description : Fills in a structure with information about the NVRAM -+ * and persistent storage sections of flash memory. -+ * Fro physmap.c to mount the fs vol. -+ * Returns : None. -+ ***********************************************************************/ -+void kerSysFlashAddrInfoGet(PFLASH_ADDR_INFO pflash_addr_info) -+{ -+ pflash_addr_info->flash_nvram_blk_offset = fInfo.flash_nvram_blk_offset; -+ pflash_addr_info->flash_nvram_length = fInfo.flash_nvram_length; -+ pflash_addr_info->flash_nvram_number_blk = fInfo.flash_nvram_number_blk; -+ pflash_addr_info->flash_nvram_start_blk = fInfo.flash_nvram_start_blk; -+ pflash_addr_info->flash_persistent_blk_offset = fInfo.flash_persistent_blk_offset; -+ pflash_addr_info->flash_persistent_length = fInfo.flash_persistent_length; -+ pflash_addr_info->flash_persistent_number_blk = fInfo.flash_persistent_number_blk; -+ pflash_addr_info->flash_persistent_start_blk = fInfo.flash_persistent_start_blk; -+} -+ -+ -+// get shared blks into *** pTempBuf *** which has to be released bye the caller! -+// return: if pTempBuf != NULL, poits to the data with the dataSize of the buffer -+// !NULL -- ok -+// NULL -- fail -+static char *getSharedBlks(int start_blk, int end_blk) -+{ -+ int i = 0; -+ int usedBlkSize = 0; -+ int sect_size = 0; -+ char *pTempBuf = NULL; -+ char *pBuf = NULL; -+ -+ for (i = start_blk; i < end_blk; i++) -+ usedBlkSize += flash_get_sector_size((byte) i); -+ -+#if defined(DEBUG_FLASH) -+ printk("usedBlkSize = %d\n", usedBlkSize); -+#endif -+ -+ if ((pTempBuf = (char *) retriedKmalloc(usedBlkSize)) == NULL) -+ { -+ printk("failed to allocate memory with size: %d\n", usedBlkSize); -+ return pTempBuf; -+ } -+ -+ pBuf = pTempBuf; -+ for (i = start_blk; i < end_blk; i++) -+ { -+ sect_size = flash_get_sector_size((byte) i); -+ -+#if defined(DEBUG_FLASH) -+ printk("i = %d, sect_size = %d, end_blk = %d\n", i, sect_size, end_blk); -+#endif -+ flash_read_buf((byte)i, 0, pBuf, sect_size); -+ pBuf += sect_size; -+ } -+ -+ return pTempBuf; -+} -+ -+ -+ -+// Set the pTempBuf to flash from start_blk to end_blk -+// return: -+// 0 -- ok -+// -1 -- fail -+static int setSharedBlks(int start_blk, int end_blk, char *pTempBuf) -+{ -+ int i = 0; -+ int sect_size = 0; -+ int sts = 0; -+ char *pBuf = pTempBuf; -+ -+ for (i = start_blk; i < end_blk; i++) -+ { -+ sect_size = flash_get_sector_size((byte) i); -+ flash_sector_erase_int(i); -+ if (flash_write_buf(i, 0, pBuf, sect_size) != sect_size) -+ { -+ printk("Error writing flash sector %d.", i); -+ sts = -1; -+ break; -+ } -+ pBuf += sect_size; -+ } -+ -+ return sts; -+} -+ -+ -+ -+/******************************************************************************* -+ * NVRAM functions -+ *******************************************************************************/ -+ -+// get nvram data -+// return: -+// 0 - ok -+// -1 - fail -+int kerSysNvRamGet(char *string, int strLen, int offset) -+{ -+ char *pBuf = NULL; -+ -+ if (!flashInitialized) -+ kerSysFlashInit(); -+ -+ if (strLen > FLASH45_LENGTH_NVRAM) -+ return -1; -+ -+ if ((pBuf = getSharedBlks(fInfo.flash_nvram_start_blk, -+ (fInfo.flash_nvram_start_blk + fInfo.flash_nvram_number_blk))) == NULL) -+ return -1; -+ -+ // get string off the memory buffer -+ memcpy(string, (pBuf + fInfo.flash_nvram_blk_offset + offset), strLen); -+ -+ retriedKfree(pBuf); -+ -+ return 0; -+} -+ -+ -+// set nvram -+// return: -+// 0 - ok -+// -1 - fail -+int kerSysNvRamSet(char *string, int strLen, int offset) -+{ -+ int sts = 0; -+ char *pBuf = NULL; -+ -+ if (strLen > FLASH45_LENGTH_NVRAM) -+ return -1; -+ -+ if ((pBuf = getSharedBlks(fInfo.flash_nvram_start_blk, -+ (fInfo.flash_nvram_start_blk + fInfo.flash_nvram_number_blk))) == NULL) -+ return -1; -+ -+ // set string to the memory buffer -+ memcpy((pBuf + fInfo.flash_nvram_blk_offset + offset), string, strLen); -+ -+ if (setSharedBlks(fInfo.flash_nvram_start_blk, -+ (fInfo.flash_nvram_number_blk + fInfo.flash_nvram_start_blk), pBuf) != 0) -+ sts = -1; -+ -+ retriedKfree(pBuf); -+ -+ return sts; -+} -+ -+ -+/*********************************************************************** -+ * Function Name: kerSysEraseNvRam -+ * Description : Erase the NVRAM storage section of flash memory. -+ * Returns : 1 -- ok, 0 -- fail -+ ***********************************************************************/ -+int kerSysEraseNvRam(void) -+{ -+ int sts = 1; -+ char *tempStorage = retriedKmalloc(FLASH45_LENGTH_NVRAM); -+ -+ // just write the whole buf with '0xff' to the flash -+ if (!tempStorage) -+ sts = 0; -+ else -+ { -+ memset(tempStorage, 0xff, FLASH45_LENGTH_NVRAM); -+ if (kerSysNvRamSet(tempStorage, FLASH45_LENGTH_NVRAM, 0) != 0) -+ sts = 0; -+ retriedKfree(tempStorage); -+ } -+ -+ return sts; -+} -+ -+ -+/******************************************************************************* -+ * PSI functions -+ *******************************************************************************/ -+// get psi data -+// return: -+// 0 - ok -+// -1 - fail -+int kerSysPersistentGet(char *string, int strLen, int offset) -+{ -+ char *pBuf = NULL; -+ -+ if (strLen > fInfo.flash_persistent_length) -+ return -1; -+ -+ if ((pBuf = getSharedBlks(fInfo.flash_persistent_start_blk, -+ (fInfo.flash_persistent_start_blk + fInfo.flash_persistent_number_blk))) == NULL) -+ return -1; -+ -+ // get string off the memory buffer -+ memcpy(string, (pBuf + fInfo.flash_persistent_blk_offset + offset), strLen); -+ -+ retriedKfree(pBuf); -+ -+ return 0; -+} -+ -+ -+// set psi -+// return: -+// 0 - ok -+// -1 - fail -+int kerSysPersistentSet(char *string, int strLen, int offset) -+{ -+ int sts = 0; -+ char *pBuf = NULL; -+ -+ if (strLen > fInfo.flash_persistent_length) -+ return -1; -+ -+ if ((pBuf = getSharedBlks(fInfo.flash_persistent_start_blk, -+ (fInfo.flash_persistent_start_blk + fInfo.flash_persistent_number_blk))) == NULL) -+ return -1; -+ -+ // set string to the memory buffer -+ memcpy((pBuf + fInfo.flash_persistent_blk_offset + offset), string, strLen); -+ -+ if (setSharedBlks(fInfo.flash_persistent_start_blk, -+ (fInfo.flash_persistent_number_blk + fInfo.flash_persistent_start_blk), pBuf) != 0) -+ sts = -1; -+ -+ retriedKfree(pBuf); -+ -+ return sts; -+} -+ -+ -+// flash bcm image -+// return: -+// 0 - ok -+// !0 - the sector number fail to be flashed (should not be 0) -+int kerSysBcmImageSet( int flash_start_addr, char *string, int size) -+{ -+ int sts; -+ int sect_size; -+ int blk_start; -+ int i; -+ char *pTempBuf = NULL; -+ int whole_image = 0; -+ -+ blk_start = flash_get_blk(flash_start_addr); -+ if( blk_start < 0 ) -+ return( -1 ); -+ -+ if (flash_start_addr == FLASH_BASE && size > FLASH45_LENGTH_BOOT_ROM) -+ whole_image = 1; -+ -+ /* write image to flash memory */ -+ do -+ { -+ sect_size = flash_get_sector_size(blk_start); -+// NOTE: for memory problem in multiple PVC configuration, temporary get rid of kmalloc this 64K for now. -+// if ((pTempBuf = (char *)retriedKmalloc(sect_size)) == NULL) -+// { -+// printk("Failed to allocate memory with size: %d. Reset the router...\n", sect_size); -+// kerSysMipsSoftReset(); // reset the board right away. -+// } -+ // for whole image, no check on psi -+ if (!whole_image && blk_start == fInfo.flash_persistent_start_blk) // share the blk with psi -+ { -+ if (size > (sect_size - fInfo.flash_persistent_length)) -+ { -+ printk("Image is too big\n"); -+ break; // image is too big. Can not overwrite to nvram -+ } -+ if ((pTempBuf = (char *)retriedKmalloc(sect_size)) == NULL) -+ { -+ printk("Failed to allocate memory with size: %d. Reset the router...\n", sect_size); -+ kerSysMipsSoftReset(); // reset the board right away. -+ } -+ flash_read_buf((byte)blk_start, 0, pTempBuf, sect_size); -+ if (copy_from_user((void *)pTempBuf,(void *)string, size) != 0) -+ break; // failed ? -+ flash_sector_erase_int(blk_start); // erase blk before flash -+ if (flash_write_buf(blk_start, 0, pTempBuf, sect_size) == sect_size) -+ size = 0; // break out and say all is ok -+ retriedKfree(pTempBuf); -+ break; -+ } -+ -+ flash_sector_erase_int(blk_start); // erase blk before flash -+ -+ if (sect_size > size) -+ { -+ if (size & 1) -+ size++; -+ sect_size = size; -+ } -+ -+ if ((i = flash_write_buf(blk_start, 0, string, sect_size)) != sect_size) { -+ break; -+ } -+ blk_start++; -+ string += sect_size; -+ size -= sect_size; -+ } while (size > 0); -+ -+ if (whole_image) -+ { -+ // If flashing a whole image, erase to end of flash. -+ int total_blks = flash_get_numsectors(); -+ while( blk_start < total_blks ) -+ { -+ flash_sector_erase_int(blk_start); -+ blk_start++; -+ } -+ } -+ if (pTempBuf) -+ retriedKfree(pTempBuf); -+ -+ if( size == 0 ) -+ sts = 0; // ok -+ else -+ sts = blk_start; // failed to flash this sector -+ -+ return sts; -+} -+ -+/******************************************************************************* -+ * SP functions -+ *******************************************************************************/ -+// get sp data. NOTE: memcpy work here -- not using copy_from/to_user -+// return: -+// 0 - ok -+// -1 - fail -+int kerSysScratchPadGet(char *tokenId, char *tokBuf, int bufLen) -+{ -+ PSP_HEADER pHead = NULL; -+ PSP_TOKEN pToken = NULL; -+ char *pBuf = NULL; -+ char *pShareBuf = NULL; -+ char *startPtr = NULL; -+ char *endPtr = NULL; -+ char *spEndPtr = NULL; -+ int sts = -1; -+ -+ if (fInfo.flash_scratch_pad_length == 0) -+ return sts; -+ -+ if (bufLen >= (fInfo.flash_scratch_pad_length - sizeof(SP_HEADER) - sizeof(SP_TOKEN))) -+ { -+ printk("Exceed scratch pad space by %d\n", bufLen - fInfo.flash_scratch_pad_length \ -+ - sizeof(SP_HEADER) - sizeof(SP_TOKEN)); -+ return sts; -+ } -+ -+ if ((pShareBuf = getSharedBlks(fInfo.flash_scratch_pad_start_blk, -+ (fInfo.flash_scratch_pad_start_blk + fInfo.flash_scratch_pad_number_blk))) == NULL) -+ return sts; -+ -+ // pBuf points to SP buf -+ pBuf = pShareBuf + fInfo.flash_scratch_pad_blk_offset; -+ -+ pHead = (PSP_HEADER) pBuf; -+ if (memcmp(pHead->SPMagicNum, MAGIC_NUMBER, MAGIC_NUM_LEN) != 0) -+ { -+ printk("Scrap pad is not initialized.\n"); -+ return sts; -+ } -+ -+ // search up to SPUsedLen for the token -+ startPtr = pBuf + sizeof(SP_HEADER); -+ endPtr = pBuf + pHead->SPUsedLen; -+ spEndPtr = pBuf + SP_MAX_LEN; -+ while (startPtr < endPtr && startPtr < spEndPtr) -+ { -+ pToken = (PSP_TOKEN) startPtr; -+ if (strncmp(pToken->tokenName, tokenId, TOKEN_NAME_LEN) == 0) -+ { -+ memcpy(tokBuf, startPtr + sizeof(SP_TOKEN), bufLen); -+ sts = 0; -+ break; -+ } -+ // get next token -+ startPtr += sizeof(SP_TOKEN) + pToken->tokenLen; -+ } -+ -+ retriedKfree(pShareBuf); -+ -+ return sts; -+} -+ -+ -+// set sp. NOTE: memcpy work here -- not using copy_from/to_user -+// return: -+// 0 - ok -+// -1 - fail -+int kerSysScratchPadSet(char *tokenId, char *tokBuf, int bufLen) -+{ -+ PSP_TOKEN pToken = NULL; -+ PSP_HEADER pHead = NULL; -+ char *pShareBuf = NULL; -+ char *pBuf = NULL; -+ SP_HEADER SPHead; -+ SP_TOKEN SPToken; -+ char *curPtr; -+ int sts = -1; -+ -+ if (fInfo.flash_scratch_pad_length == 0) -+ return sts; -+ -+ if (bufLen >= (fInfo.flash_scratch_pad_length - sizeof(SP_HEADER) - sizeof(SP_TOKEN))) -+ { -+ printk("Exceed scratch pad space by %d\n", bufLen - fInfo.flash_scratch_pad_length \ -+ - sizeof(SP_HEADER) - sizeof(SP_TOKEN)); -+ return sts; -+ } -+ -+ if ((pShareBuf = getSharedBlks(fInfo.flash_scratch_pad_start_blk, -+ (fInfo.flash_scratch_pad_start_blk + fInfo.flash_scratch_pad_number_blk))) == NULL) -+ return sts; -+ -+ // pBuf points to SP buf -+ pBuf = pShareBuf + fInfo.flash_scratch_pad_blk_offset; -+ pHead = (PSP_HEADER) pBuf; -+ -+ // form header info. SPUsedLen later on... -+ memset((char *)&SPHead, 0, sizeof(SP_HEADER)); -+ memcpy(SPHead.SPMagicNum, MAGIC_NUMBER, MAGIC_NUM_LEN); -+ SPHead.SPVersion = SP_VERSION; -+ -+ // form token info. -+ memset((char*)&SPToken, 0, sizeof(SP_TOKEN)); -+ strncpy(SPToken.tokenName, tokenId, TOKEN_NAME_LEN - 1); -+ SPToken.tokenLen = bufLen; -+ if (memcmp(pHead->SPMagicNum, MAGIC_NUMBER, MAGIC_NUM_LEN) != 0) -+ { -+ // new sp, so just flash the token -+ printk("No Scrap pad found. Initialize scratch pad...\n"); -+ SPHead.SPUsedLen = sizeof(SP_HEADER) + sizeof(SP_TOKEN) + bufLen; -+ memcpy(pBuf, (char *)&SPHead, sizeof(SP_HEADER)); -+ curPtr = pBuf + sizeof(SP_HEADER); -+ memcpy(curPtr, (char *)&SPToken, sizeof(SP_TOKEN)); -+ curPtr += sizeof(SP_TOKEN); -+ memcpy(curPtr, tokBuf, bufLen); -+ } -+ else -+ { -+ // need search for the token, if exist with same size overwrite it. if sizes differ, -+ // move over the later token data over and put the new one at the end -+ char *endPtr = pBuf + pHead->SPUsedLen; -+ char *spEndPtr = pBuf + SP_MAX_LEN; -+ curPtr = pBuf + sizeof(SP_HEADER); -+ while (curPtr < endPtr && curPtr < spEndPtr) -+ { -+ pToken = (PSP_TOKEN) curPtr; -+ if (strncmp(pToken->tokenName, tokenId, TOKEN_NAME_LEN) == 0) -+ { -+ if (pToken->tokenLen == bufLen) // overwirte it -+ { -+ memcpy((curPtr+sizeof(SP_TOKEN)), tokBuf, bufLen); -+ break; -+ } -+ else // move later data over and put the new token at the end -+ { -+ memcpy((curPtr+sizeof(SP_TOKEN)), tokBuf, bufLen); // ~~~ -+ break; -+ } -+ } -+ else // not same token ~~~ -+ { -+ } -+ // get next token -+ curPtr += sizeof(SP_TOKEN) + pToken->tokenLen; -+ } // end while -+ SPHead.SPUsedLen = sizeof(SP_HEADER) + sizeof(SP_TOKEN) + bufLen; // ~~~ -+ if (SPHead.SPUsedLen > SP_MAX_LEN) -+ { -+ printk("No more Scratch pad space left! Over limit by %d bytes\n", SPHead.SPUsedLen - SP_MAX_LEN); -+ return sts; -+ } -+ -+ } // else if not new sp -+ -+ sts = setSharedBlks(fInfo.flash_scratch_pad_start_blk, -+ (fInfo.flash_scratch_pad_number_blk + fInfo.flash_scratch_pad_start_blk), pShareBuf); -+ -+ retriedKfree(pShareBuf); -+ -+ return sts; -+ -+ -+} -+ -+int kerSysFlashSizeGet(void) -+{ -+ return flash_get_total_size(); -+} -+ -diff -urN linux-2.6.17/arch/mips/brcm-boards/bcm963xx/bcm63xx_led.c linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/bcm63xx_led.c ---- linux-2.6.17/arch/mips/brcm-boards/bcm963xx/bcm63xx_led.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/bcm63xx_led.c 2006-08-03 16:36:58.000000000 +0200 -@@ -0,0 +1,582 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+/*************************************************************************** -+ * File Name : bcm63xx_led.c -+ * -+ * Description: -+ * -+ * This file contains bcm963xx board led control API functions. -+ * -+ * To use it, do the following -+ * -+ * 1). define in the board.c the following led mappping (this is for 6345GW board): -+ * const LED_MAP_PAIR cLedMapping45GW[] = -+ * { // led name Initial state physical pin (ledMask) -+ * {kLedUsb, kLedStateOff, GPIO_LED_PIN_7}, -+ * {kLedAdsl, kLedStateOff, GPIO_LED_PIN_8}, -+ * {kLedPPP, kLedStateOff, GPIO_LED_PIN_9}, // PPP and WanData share PIN_9 -+ * {kLedWanData, kLedStateOff, GPIO_LED_PIN_9}, -+ * {kLedWireless, kLedStateOff, GPIO_LED_PIN_10}, -+ * {kLedEnd, kLedStateOff, 0 } // NOTE: kLedEnd has to be at the end. -+ * -+ * 2). };To initialize led API and initial state of the leds, call the following function with the mapping -+ * pointer from the above struct -+ * -+ * boardLedInit((PLED_MAP_PAIR) &cLedMapping45R); -+ * -+ * 3). Sample call for kernel mode: -+ * -+ * kerSysLedCtrl(kLedAdsl, kLedStateBlinkOnce); // kLedxxx defines in board.h -+ * -+ * 4). Sample call for user mode -+ * -+ * sysLedCtrl(kLedAdsl, kLedStateBlinkOnce); // kLedxxx defines in board_api.h -+ * -+ * -+ * Created on : 10/28/2002 seanl -+ * -+ ***************************************************************************/ -+ -+/* Includes. */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#define k100ms (HZ / 10) // ~100 ms -+#define kFastBlinkCount 0 // ~100ms -+#define kSlowBlinkCount 5 // ~600ms -+ -+#define MAX_VIRT_LEDS 12 -+ -+// uncomment // for debug led -+//#define DEBUG_LED -+ -+// global variables: -+struct timer_list gLedTimer; -+int gTimerOn = FALSE; -+int gLedCount = 0; -+ -+typedef struct ledinfo -+{ -+ unsigned short ledMask; // mask for led: ie. giop 10 = 0x0400 -+ unsigned short ledActiveLow; // GPIO bit reset to turn on LED -+ unsigned short ledMaskFail; // mask for led: ie. giop 10 = 0x0400 -+ unsigned short ledActiveLowFail;// GPIO bit reset to turn on LED -+ BOARD_LED_STATE ledState; // current led state -+ BOARD_LED_STATE savedLedState; // used in blink once for restore to the orignal ledState -+ int blinkCountDown; // if == 0, do blink (toggle). Is assgined value and dec by 1 at each timer. -+} LED_INFO, *PLED_INFO; -+ -+static PLED_INFO gLed = NULL; -+static PLED_INFO gpVirtLeds[MAX_VIRT_LEDS]; -+static HANDLE_LED_FUNC gLedHwFunc[MAX_VIRT_LEDS]; -+static HANDLE_LED_FUNC gLedHwFailFunc[MAX_VIRT_LEDS]; -+ -+#if 0 /* BROKEN */ -+#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338) -+static int gLedOffInBridgeMode = 1; -+#elif defined(CONFIG_BCM96345) -+static int gLedOffInBridgeMode = 0; -+#endif -+#endif -+ -+void ledTimerExpire(void); -+int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed ); -+ -+//************************************************************************************** -+// LED operations -+//************************************************************************************** -+ -+// turn led on and set the ledState -+void ledOn(PLED_INFO pLed) -+{ -+ if( pLed->ledMask ) -+ { -+ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one -+ if( pLed->ledActiveLow ) -+ GPIO->GPIOio &= ~pLed->ledMask; // turn on the led -+ else -+ GPIO->GPIOio |= pLed->ledMask; // turn on the led -+ pLed->ledState = pLed->savedLedState = kLedStateOn; -+ } -+} -+ -+ -+// turn led off and set the ledState -+void ledOff(PLED_INFO pLed) -+{ -+ if( pLed->ledMask ) -+ { -+ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one -+ if( pLed->ledActiveLow ) -+ GPIO->GPIOio |= pLed->ledMask; // turn off the led -+ else -+ GPIO->GPIOio &= ~pLed->ledMask; // turn off the led -+ pLed->ledState = pLed->savedLedState = kLedStateOff; -+ } -+} -+ -+// turn led on and set the ledState -+void ledOnFail(PLED_INFO pLed) -+{ -+ if( pLed->ledMaskFail ) -+ { -+ GPIO->GPIODir |= pLed->ledMaskFail; // turn on the direction bit in case was turned off by some one -+ if( pLed->ledActiveLowFail ) -+ GPIO->GPIOio &= ~pLed->ledMaskFail;// turn on the led -+ else -+ GPIO->GPIOio |= pLed->ledMaskFail; // turn on the led -+ pLed->ledState = pLed->savedLedState = kLedStateFail; -+ } -+} -+ -+ -+// turn led off and set the ledState -+void ledOffFail(PLED_INFO pLed) -+{ -+ if( pLed->ledMaskFail ) -+ { -+ GPIO->GPIODir |= pLed->ledMaskFail; // turn on the direction bit in case was turned off by some one -+ if( pLed->ledActiveLowFail ) -+ GPIO->GPIOio |= pLed->ledMaskFail; // turn off the led -+ else -+ GPIO->GPIOio &= ~pLed->ledMaskFail;// turn off the led -+ pLed->ledState = pLed->savedLedState = kLedStateOff; -+ } -+} -+ -+ -+// toggle the led and return the current ledState -+BOARD_LED_STATE ledToggle(PLED_INFO pLed) -+{ -+ GPIO->GPIODir |= pLed->ledMask; // turn on the direction bit in case was turned off by some one -+ if (GPIO->GPIOio & pLed->ledMask) -+ { -+ GPIO->GPIOio &= ~(pLed->ledMask); -+ return( (pLed->ledActiveLow) ? kLedStateOn : kLedStateOff ); -+ } -+ else -+ { -+ GPIO->GPIOio |= pLed->ledMask; -+ return( (pLed->ledActiveLow) ? kLedStateOff : kLedStateOn ); -+ } -+} -+ -+ -+// led timer. Will return if timer is already on -+void ledTimerStart(void) -+{ -+ if (gTimerOn) -+ return; -+ -+#if defined(DEBUG_LED) -+ printk("led: add_timer\n"); -+#endif -+ -+ init_timer(&gLedTimer); -+ gLedTimer.function = (void*)ledTimerExpire; -+ gLedTimer.expires = jiffies + k100ms; // timer expires in ~100ms -+ add_timer (&gLedTimer); -+ gTimerOn = TRUE; -+} -+ -+ -+// led timer expire kicks in about ~100ms and perform the led operation according to the ledState and -+// restart the timer according to ledState -+void ledTimerExpire(void) -+{ -+ int i; -+ PLED_INFO pCurLed; -+ -+ gTimerOn = FALSE; -+ -+ for (i = 0, pCurLed = gLed; i < gLedCount; i++, pCurLed++) -+ { -+#if defined(DEBUG_LED) -+ printk("led[%d]: Mask=0x%04x, State = %d, blcd=%d\n", i, pCurLed->ledMask, pCurLed->ledState, pCurLed->blinkCountDown); -+#endif -+ switch (pCurLed->ledState) -+ { -+ case kLedStateOn: -+ case kLedStateOff: -+ case kLedStateFail: -+ pCurLed->blinkCountDown = 0; // reset the blink count down -+ break; -+ -+ case kLedStateBlinkOnce: -+ ledToggle(pCurLed); -+ pCurLed->blinkCountDown = 0; // reset to 0 -+ pCurLed->ledState = pCurLed->savedLedState; -+ if (pCurLed->ledState == kLedStateSlowBlinkContinues || -+ pCurLed->ledState == kLedStateFastBlinkContinues) -+ ledTimerStart(); // start timer if in blinkContinues stats -+ break; -+ -+ case kLedStateSlowBlinkContinues: -+ if (pCurLed->blinkCountDown-- == 0) -+ { -+ pCurLed->blinkCountDown = kSlowBlinkCount; -+ ledToggle(pCurLed); -+ } -+ ledTimerStart(); -+ break; -+ -+ case kLedStateFastBlinkContinues: -+ if (pCurLed->blinkCountDown-- == 0) -+ { -+ pCurLed->blinkCountDown = kFastBlinkCount; -+ ledToggle(pCurLed); -+ } -+ ledTimerStart(); -+ break; -+ -+ default: -+ printk("Invalid state = %d\n", pCurLed->ledState); -+ } -+ } -+} -+ -+// initialize the gLedCount and allocate and fill gLed struct -+void __init boardLedInit(PLED_MAP_PAIR cLedMapping) -+{ -+ PLED_MAP_PAIR p1, p2; -+ PLED_INFO pCurLed; -+ int needTimer = FALSE; -+ int alreadyUsed = 0; -+ -+#if defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338) -+ /* Set blink rate for BCM6348/BCM6338 hardware LEDs. */ -+ GPIO->LEDCtrl &= ~LED_INTERVAL_SET_MASK; -+ GPIO->LEDCtrl |= LED_INTERVAL_SET_80MS; -+#endif -+ -+ memset( gpVirtLeds, 0x00, sizeof(gpVirtLeds) ); -+ memset( gLedHwFunc, 0x00, sizeof(gLedHwFunc) ); -+ memset( gLedHwFailFunc, 0x00, sizeof(gLedHwFailFunc) ); -+ -+ gLedCount = 0; -+ -+ // Check for multiple LED names and multiple LED GPIO pins that share the -+ // same physical board LED. -+ for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ ) -+ { -+ alreadyUsed = 0; -+ for( p2 = cLedMapping; p2 != p1; p2++ ) -+ { -+ if( (p1->ledMask && p1->ledMask == p2->ledMask) || -+ (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) ) -+ { -+ alreadyUsed = 1; -+ break; -+ } -+ } -+ -+ if( alreadyUsed == 0 ) -+ gLedCount++; -+ } -+ -+ gLed = (PLED_INFO) kmalloc((gLedCount * sizeof(LED_INFO)), GFP_KERNEL); -+ if( gLed == NULL ) -+ { -+ printk( "LED memory allocation error.\n" ); -+ return; -+ } -+ -+ memset( gLed, 0x00, gLedCount * sizeof(LED_INFO) ); -+ -+ // initial the gLed with unique ledMask and initial state. If more than 1 ledNames share the physical led -+ // (ledMask) the first defined led's ledInitState will be used. -+ pCurLed = gLed; -+ for( p1 = cLedMapping; p1->ledName != kLedEnd; p1++ ) -+ { -+ if( (int) p1->ledName > MAX_VIRT_LEDS ) -+ continue; -+ -+ alreadyUsed = 0; -+ for( p2 = cLedMapping; p2 != p1; p2++ ) -+ { -+ if( (p1->ledMask && p1->ledMask == p2->ledMask) || -+ (p1->ledMaskFail && p1->ledMaskFail == p2->ledMaskFail) ) -+ { -+ alreadyUsed = 1; -+ break; -+ } -+ } -+ -+ if( alreadyUsed == 0 ) -+ { -+ // Initialize the board LED for the first time. -+ needTimer = initLedInfo( p1, pCurLed ); -+ gpVirtLeds[(int) p1->ledName] = pCurLed; -+ pCurLed++; -+ } -+ else -+ { -+ PLED_INFO pLed; -+ for( pLed = gLed; pLed != pCurLed; pLed++ ) -+ { -+ // Find the LED_INFO structure that has already been initialized. -+ if((pLed->ledMask && pLed->ledMask == p1->ledMask) || -+ (pLed->ledMaskFail && pLed->ledMaskFail==p1->ledMaskFail)) -+ { -+ // The board LED has already been initialized but possibly -+ // not completely initialized. -+ if( p1->ledMask ) -+ { -+ pLed->ledMask = p1->ledMask; -+ pLed->ledActiveLow = p1->ledActiveLow; -+ } -+ if( p1->ledMaskFail ) -+ { -+ pLed->ledMaskFail = p1->ledMaskFail; -+ pLed->ledActiveLowFail = p1->ledActiveLowFail; -+ } -+ gpVirtLeds[(int) p1->ledName] = pLed; -+ break; -+ } -+ } -+ } -+ } -+ -+ if (needTimer) -+ ledTimerStart(); -+ -+#if defined(DEBUG_LED) -+ int i; -+ for (i=0; i < gLedCount; i++) -+ printk("initLed: led[%d]: mask=0x%04x, state=%d\n", i,(gLed+i)->ledMask, (gLed+i)->ledState); -+#endif -+ -+} -+ -+// Initialize a structure that contains information about a physical board LED -+// control. The board LED may contain more than one GPIO pin to control a -+// normal condition (green) or a failure condition (red). -+int initLedInfo( PLED_MAP_PAIR pCurMap, PLED_INFO pCurLed ) -+{ -+ int needTimer = FALSE; -+ pCurLed->ledState = pCurLed->savedLedState = pCurMap->ledInitState; -+ pCurLed->ledMask = pCurMap->ledMask; -+ pCurLed->ledActiveLow = pCurMap->ledActiveLow; -+ pCurLed->ledMaskFail = pCurMap->ledMaskFail; -+ pCurLed->ledActiveLowFail = pCurMap->ledActiveLowFail; -+ -+ switch (pCurLed->ledState) -+ { -+ case kLedStateOn: -+ pCurLed->blinkCountDown = 0; // reset the blink count down -+ ledOn(pCurLed); -+ break; -+ case kLedStateOff: -+ pCurLed->blinkCountDown = 0; // reset the blink count down -+ ledOff(pCurLed); -+ break; -+ case kLedStateFail: -+ pCurLed->blinkCountDown = 0; // reset the blink count down -+ ledOnFail(pCurLed); -+ break; -+ case kLedStateBlinkOnce: -+ pCurLed->blinkCountDown = 1; -+ needTimer = TRUE; -+ break; -+ case kLedStateSlowBlinkContinues: -+ pCurLed->blinkCountDown = kSlowBlinkCount; -+ needTimer = TRUE; -+ break; -+ case kLedStateFastBlinkContinues: -+ pCurLed->blinkCountDown = kFastBlinkCount; -+ needTimer = TRUE; -+ break; -+ default: -+ printk("Invalid state = %d\n", pCurLed->ledState); -+ } -+ -+ return( needTimer ); -+} -+ -+#if 0 /* BROKEN */ -+// Determines if there is at least one interface in bridge mode. Bridge mode -+// is determined by the cfm convention of naming bridge interfaces nas17 -+// through nas24. -+static int isBridgedProtocol(void) -+{ -+ extern int dev_get(const char *name); -+ const int firstBridgeId = 17; -+ const int lastBridgeId = 24; -+ int i; -+ int ret = FALSE; -+ char name[16]; -+ -+ for( i = firstBridgeId; i <= lastBridgeId; i++ ) -+ { -+ sprintf( name, "nas%d", i ); -+ -+ if( dev_get(name) ) -+ { -+ ret = TRUE; -+ break; -+ } -+ } -+ -+ return(ret); -+} -+#endif -+ -+// led ctrl. Maps the ledName to the corresponding ledInfoPtr and perform the led operation -+void boardLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState) -+{ -+ PLED_INFO ledInfoPtr; -+ -+ // do the mapping from virtual to physical led -+ if( (int) ledName < MAX_VIRT_LEDS ) -+ ledInfoPtr = gpVirtLeds[(int) ledName]; -+ else -+ ledInfoPtr = NULL; -+ -+ if (ledInfoPtr == NULL) -+ return; -+ -+ if( ledState != kLedStateFail && gLedHwFunc[(int) ledName] ) -+ { -+ (*gLedHwFunc[(int) ledName]) (ledName, ledState); -+ ledOffFail(ledInfoPtr); -+ return; -+ } -+ else -+ if( ledState == kLedStateFail && gLedHwFailFunc[(int) ledName] ) -+ { -+ (*gLedHwFailFunc[(int) ledName]) (ledName, ledState); -+ ledOff(ledInfoPtr); -+ return; -+ } -+ -+#if 0 /* BROKEN */ -+ // Do not blink the WAN Data LED if at least one interface is in bridge mode. -+ if(gLedOffInBridgeMode == 1 && (ledName == kLedWanData || ledName == kLedPPP)) -+ { -+ static int BridgedProtocol = -1; -+ -+ if( BridgedProtocol == -1 ) -+ BridgedProtocol = isBridgedProtocol(); -+ -+ if( BridgedProtocol == TRUE ) -+ return; -+ } -+#endif -+ -+ // If the state is kLedStateFail and there is not a failure LED defined -+ // in the board parameters, change the state to kLedStateFastBlinkContinues. -+ if( ledState == kLedStateFail && ledInfoPtr->ledMaskFail == 0 ) -+ ledState = kLedStateFastBlinkContinues; -+ -+ switch (ledState) -+ { -+ case kLedStateOn: -+ // First, turn off the complimentary (failure) LED GPIO. -+ if( ledInfoPtr->ledMaskFail ) -+ ledOffFail(ledInfoPtr); -+ else -+ if( gLedHwFailFunc[(int) ledName] ) -+ (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff); -+ -+ // Next, turn on the specified LED GPIO. -+ ledOn(ledInfoPtr); -+ break; -+ -+ case kLedStateOff: -+ // First, turn off the complimentary (failure) LED GPIO. -+ if( ledInfoPtr->ledMaskFail ) -+ ledOffFail(ledInfoPtr); -+ else -+ if( gLedHwFailFunc[(int) ledName] ) -+ (*gLedHwFailFunc[(int) ledName]) (ledName, kLedStateOff); -+ -+ // Next, turn off the specified LED GPIO. -+ ledOff(ledInfoPtr); -+ break; -+ -+ case kLedStateFail: -+ // First, turn off the complimentary (normal) LED GPIO. -+ if( ledInfoPtr->ledMask ) -+ ledOff(ledInfoPtr); -+ else -+ if( gLedHwFunc[(int) ledName] ) -+ (*gLedHwFunc[(int) ledName]) (ledName, kLedStateOff); -+ -+ // Next, turn on (red) the specified LED GPIO. -+ ledOnFail(ledInfoPtr); -+ break; -+ -+ case kLedStateBlinkOnce: -+ // skip blinkOnce if it is already in Slow/Fast blink continues state -+ if (ledInfoPtr->savedLedState == kLedStateSlowBlinkContinues || -+ ledInfoPtr->savedLedState == kLedStateFastBlinkContinues) -+ ; -+ else -+ { -+ if (ledInfoPtr->blinkCountDown == 0) // skip the call if it is 1 -+ { -+ ledToggle(ledInfoPtr); -+ ledInfoPtr->blinkCountDown = 1; // it will be reset to 0 when timer expires -+ ledInfoPtr->ledState = kLedStateBlinkOnce; -+ ledTimerStart(); -+ } -+ } -+ break; -+ -+ case kLedStateSlowBlinkContinues: -+ ledInfoPtr->blinkCountDown = kSlowBlinkCount; -+ ledInfoPtr->ledState = kLedStateSlowBlinkContinues; -+ ledInfoPtr->savedLedState = kLedStateSlowBlinkContinues; -+ ledTimerStart(); -+ break; -+ -+ case kLedStateFastBlinkContinues: -+ ledInfoPtr->blinkCountDown = kFastBlinkCount; -+ ledInfoPtr->ledState = kLedStateFastBlinkContinues; -+ ledInfoPtr->savedLedState = kLedStateFastBlinkContinues; -+ ledTimerStart(); -+ break; -+ -+ default: -+ printk("Invalid led state\n"); -+ } -+} -+ -+// This function is called for an LED that is controlled by hardware. -+void kerSysLedRegisterHwHandler( BOARD_LED_NAME ledName, -+ HANDLE_LED_FUNC ledHwFunc, int ledFailType ) -+{ -+ if( (int) ledName < MAX_VIRT_LEDS ) -+ { -+ if( ledFailType == 1 ) -+ gLedHwFailFunc[(int) ledName] = ledHwFunc; -+ else -+ gLedHwFunc[(int) ledName] = ledHwFunc; -+ } -+} -+ -diff -urN linux-2.6.17/arch/mips/brcm-boards/bcm963xx/board.c linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/board.c ---- linux-2.6.17/arch/mips/brcm-boards/bcm963xx/board.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/board.c 2006-08-03 16:37:21.000000000 +0200 -@@ -0,0 +1,1781 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+/*************************************************************************** -+ * File Name : board.c -+ * -+ * Description: This file contains Linux character device driver entry -+ * for the board related ioctl calls: flash, get free kernel -+ * page and dump kernel memory, etc. -+ * -+ * Created on : 2/20/2002 seanl: use cfiflash.c, cfliflash.h (AMD specific) -+ * -+ ***************************************************************************/ -+ -+ -+/* Includes. */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include "boardparms.h" -+#include "cfiflash.h" -+#include "bcm_intr.h" -+#include "board.h" -+#include "bcm_map_part.h" -+ -+static DEFINE_SPINLOCK(board_lock); -+ -+/* Typedefs. */ -+#if defined (NON_CONSECUTIVE_MAC) -+// used to be the last octet. Now changed to the first 5 bits of the the forth octet -+// to reduced the duplicated MAC addresses. -+#define CHANGED_OCTET 3 -+#define SHIFT_BITS 3 -+#else -+#define CHANGED_OCTET 1 -+#define SHIFT_BITS 0 -+#endif -+ -+#if defined (WIRELESS) -+#define SES_BTN_PRESSED 0x00000001 -+#define SES_EVENTS SES_BTN_PRESSED /*OR all values if any*/ -+#define SES_LED_OFF 0 -+#define SES_LED_ON 1 -+#define SES_LED_BLINK 2 -+#endif -+ -+typedef struct -+{ -+ unsigned long ulId; -+ char chInUse; -+ char chReserved[3]; -+} MAC_ADDR_INFO, *PMAC_ADDR_INFO; -+ -+typedef struct -+{ -+ unsigned long ulSdramSize; -+ unsigned long ulPsiSize; -+ unsigned long ulNumMacAddrs; -+ unsigned long ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN]; -+ MAC_ADDR_INFO MacAddrs[1]; -+} NVRAM_INFO, *PNVRAM_INFO; -+ -+typedef struct -+{ -+ unsigned long eventmask; -+} BOARD_IOC, *PBOARD_IOC; -+ -+ -+/*Dyinggasp callback*/ -+typedef void (*cb_dgasp_t)(void *arg); -+typedef struct _CB_DGASP__LIST -+{ -+ struct list_head list; -+ char name[IFNAMSIZ]; -+ cb_dgasp_t cb_dgasp_fn; -+ void *context; -+}CB_DGASP_LIST , *PCB_DGASP_LIST; -+ -+ -+static LED_MAP_PAIR LedMapping[] = -+{ // led name Initial state physical pin (ledMask) -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0}, -+ {kLedEnd, kLedStateOff, 0, 0, 0, 0} // NOTE: kLedEnd has to be at the end. -+}; -+ -+/* Externs. */ -+extern struct file fastcall *fget_light(unsigned int fd, int *fput_needed); -+extern unsigned int nr_free_pages (void); -+extern const char *get_system_type(void); -+extern void kerSysFlashInit(void); -+extern unsigned long get_nvram_start_addr(void); -+extern unsigned long get_scratch_pad_start_addr(void); -+extern unsigned long getMemorySize(void); -+extern void __init boardLedInit(PLED_MAP_PAIR); -+extern void boardLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE); -+extern void kerSysLedRegisterHandler( BOARD_LED_NAME ledName, -+ HANDLE_LED_FUNC ledHwFunc, int ledFailType ); -+ -+/* Prototypes. */ -+void __init InitNvramInfo( void ); -+static int board_open( struct inode *inode, struct file *filp ); -+static int board_ioctl( struct inode *inode, struct file *flip, unsigned int command, unsigned long arg ); -+static ssize_t board_read(struct file *filp, char __user *buffer, size_t count, loff_t *ppos); -+static unsigned int board_poll(struct file *filp, struct poll_table_struct *wait); -+static int board_release(struct inode *inode, struct file *filp); -+ -+static BOARD_IOC* borad_ioc_alloc(void); -+static void borad_ioc_free(BOARD_IOC* board_ioc); -+ -+/* DyingGasp function prototype */ -+static void __init kerSysDyingGaspMapIntr(void); -+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) -+static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id, struct pt_regs * regs); -+#else -+static unsigned int kerSysDyingGaspIsr(void); -+#endif -+static void __init kerSysInitDyingGaspHandler( void ); -+static void __exit kerSysDeinitDyingGaspHandler( void ); -+/* -DyingGasp function prototype - */ -+ -+ -+#if defined (WIRELESS) -+static irqreturn_t sesBtn_isr(int irq, void *dev_id, struct pt_regs *ptregs); -+static void __init sesBtn_mapGpio(void); -+static void __init sesBtn_mapIntr(int context); -+static unsigned int sesBtn_poll(struct file *file, struct poll_table_struct *wait); -+static ssize_t sesBtn_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos); -+static void __init sesLed_mapGpio(void); -+static void sesLed_ctrl(int action); -+static void __init ses_board_init(void); -+static void __exit ses_board_deinit(void); -+#endif -+ -+static PNVRAM_INFO g_pNvramInfo = NULL; -+static int g_ledInitialized = 0; -+static wait_queue_head_t g_board_wait_queue; -+static CB_DGASP_LIST *g_cb_dgasp_list_head = NULL; -+ -+static int g_wakeup_monitor = 0; -+static struct file *g_monitor_file = NULL; -+static struct task_struct *g_monitor_task = NULL; -+static unsigned int (*g_orig_fop_poll) -+ (struct file *, struct poll_table_struct *) = NULL; -+ -+static struct file_operations board_fops = -+{ -+ open: board_open, -+ ioctl: board_ioctl, -+ poll: board_poll, -+ read: board_read, -+ release: board_release, -+}; -+ -+uint32 board_major = 0; -+ -+#if defined (WIRELESS) -+static unsigned short sesBtn_irq = BP_NOT_DEFINED; -+static unsigned short sesBtn_gpio = BP_NOT_DEFINED; -+static unsigned short sesLed_gpio = BP_NOT_DEFINED; -+#endif -+ -+#if defined(MODULE) -+int init_module(void) -+{ -+ return( brcm_board_init() ); -+} -+ -+void cleanup_module(void) -+{ -+ if (MOD_IN_USE) -+ printk("brcm flash: cleanup_module failed because module is in use\n"); -+ else -+ brcm_board_cleanup(); -+} -+#endif //MODULE -+ -+ -+ -+static int __init brcm_board_init( void ) -+{ -+ typedef int (*BP_LED_FUNC) (unsigned short *); -+ static struct BpLedInformation -+ { -+ BOARD_LED_NAME ledName; -+ BP_LED_FUNC bpFunc; -+ BP_LED_FUNC bpFuncFail; -+ } bpLedInfo[] = -+ {{kLedAdsl, BpGetAdslLedGpio, BpGetAdslFailLedGpio}, -+ {kLedWireless, BpGetWirelessLedGpio, NULL}, -+ {kLedUsb, BpGetUsbLedGpio, NULL}, -+ {kLedHpna, BpGetHpnaLedGpio, NULL}, -+ {kLedWanData, BpGetWanDataLedGpio, NULL}, -+ {kLedPPP, BpGetPppLedGpio, BpGetPppFailLedGpio}, -+ {kLedVoip, BpGetVoipLedGpio, NULL}, -+ {kLedSes, BpGetWirelessSesLedGpio, NULL}, -+ {kLedEnd, NULL, NULL} -+ }; -+ -+ int ret; -+ -+ ret = register_chrdev(BOARD_DRV_MAJOR, "bcrmboard", &board_fops ); -+ if (ret < 0) -+ printk( "brcm_board_init(major %d): fail to register device.\n",BOARD_DRV_MAJOR); -+ else -+ { -+ PLED_MAP_PAIR pLedMap = LedMapping; -+ unsigned short gpio; -+ struct BpLedInformation *pInfo; -+ -+ printk("brcmboard: brcm_board_init entry\n"); -+ board_major = BOARD_DRV_MAJOR; -+ if (boot_loader_type == BOOT_CFE) -+ InitNvramInfo(); -+ -+#if !defined(CONFIG_BCM96338) -+ GPIO->GPIOMode &= ~(0x000F0000); -+#endif -+ -+ pLedMap[0].ledName = kLedSelfTest ; -+ pLedMap[0].ledMask = GPIO_NUM_TO_MASK(0); -+ pLedMap[0].ledActiveLow = 0; -+ -+ pLedMap[1].ledName = kLedAdsl; -+ pLedMap[1].ledMask = GPIO_NUM_TO_MASK(1); -+ pLedMap[1].ledActiveLow = 0; -+ -+ pLedMap[2].ledName = kLedLan ; -+ pLedMap[2].ledMask = GPIO_NUM_TO_MASK(2); -+ pLedMap[2].ledActiveLow = 0; -+ -+ pLedMap[3].ledName = kLedVoip ; -+ pLedMap[3].ledMask = GPIO_NUM_TO_MASK(3); -+ pLedMap[3].ledActiveLow = 0; -+ -+ pLedMap[4].ledName = kLedWireless ; -+ pLedMap[4].ledMask = GPIO_NUM_TO_MASK(4); -+ pLedMap[4].ledActiveLow = 0; -+ -+ pLedMap[5].ledName = kLedEnd; -+ -+#if 0 -+ for( pInfo = bpLedInfo; pInfo->ledName != kLedEnd; pInfo++ ) -+ { -+ if( pInfo->bpFunc && (*pInfo->bpFunc) (&gpio) == BP_SUCCESS ) -+ { -+ pLedMap->ledName = pInfo->ledName; -+ pLedMap->ledMask = GPIO_NUM_TO_MASK(gpio); -+ pLedMap->ledActiveLow = (gpio & BP_ACTIVE_LOW) ? 1 : 0; -+ } -+ if( pInfo->bpFuncFail && (*pInfo->bpFuncFail) (&gpio) == BP_SUCCESS ) -+ { -+ pLedMap->ledName = pInfo->ledName; -+ pLedMap->ledMaskFail = GPIO_NUM_TO_MASK(gpio); -+ pLedMap->ledActiveLowFail = (gpio & BP_ACTIVE_LOW) ? 1 : 0; -+ } -+ if( pLedMap->ledName != kLedEnd ) -+ pLedMap++; -+ } -+#endif -+ init_waitqueue_head(&g_board_wait_queue); -+#if defined (WIRELESS) -+ ses_board_init(); -+#endif -+ kerSysInitDyingGaspHandler(); -+ kerSysDyingGaspMapIntr(); -+ -+ boardLedInit(LedMapping); -+ g_ledInitialized = 1; -+ } -+ -+ return ret; -+} -+ -+void __init InitNvramInfo( void ) -+{ -+ PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr(); -+ unsigned long ulNumMacAddrs = pNvramData->ulNumMacAddrs; -+ -+ if( ulNumMacAddrs > 0 && ulNumMacAddrs <= NVRAM_MAC_COUNT_MAX ) -+ { -+ unsigned long ulNvramInfoSize = -+ sizeof(NVRAM_INFO) + ((sizeof(MAC_ADDR_INFO) - 1) * ulNumMacAddrs); -+ -+ g_pNvramInfo = (PNVRAM_INFO) kmalloc( ulNvramInfoSize, GFP_KERNEL ); -+ -+ if( g_pNvramInfo ) -+ { -+ unsigned long ulPsiSize; -+ if( BpGetPsiSize( &ulPsiSize ) != BP_SUCCESS ) -+ ulPsiSize = NVRAM_PSI_DEFAULT; -+ memset( g_pNvramInfo, 0x00, ulNvramInfoSize ); -+ g_pNvramInfo->ulPsiSize = ulPsiSize * 1024; -+ g_pNvramInfo->ulNumMacAddrs = pNvramData->ulNumMacAddrs; -+ memcpy( g_pNvramInfo->ucaBaseMacAddr, pNvramData->ucaBaseMacAddr, -+ NVRAM_MAC_ADDRESS_LEN ); -+ g_pNvramInfo->ulSdramSize = getMemorySize(); -+ } -+ else -+ printk("ERROR - Could not allocate memory for NVRAM data\n"); -+ } -+ else -+ printk("ERROR - Invalid number of MAC addresses (%ld) is configured.\n", -+ ulNumMacAddrs); -+} -+ -+void __exit brcm_board_cleanup( void ) -+{ -+ printk("brcm_board_cleanup()\n"); -+ -+ if (board_major != -1) -+ { -+#if defined (WIRELESS) -+ ses_board_deinit(); -+#endif -+ kerSysDeinitDyingGaspHandler(); -+ unregister_chrdev(board_major, "board_ioctl"); -+ } -+} -+ -+static BOARD_IOC* borad_ioc_alloc(void) -+{ -+ BOARD_IOC *board_ioc =NULL; -+ board_ioc = (BOARD_IOC*) kmalloc( sizeof(BOARD_IOC) , GFP_KERNEL ); -+ if(board_ioc) -+ { -+ memset(board_ioc, 0, sizeof(BOARD_IOC)); -+ } -+ return board_ioc; -+} -+ -+static void borad_ioc_free(BOARD_IOC* board_ioc) -+{ -+ if(board_ioc) -+ { -+ kfree(board_ioc); -+ } -+} -+ -+ -+static int board_open( struct inode *inode, struct file *filp ) -+{ -+ filp->private_data = borad_ioc_alloc(); -+ -+ if (filp->private_data == NULL) -+ return -ENOMEM; -+ -+ return( 0 ); -+} -+ -+static int board_release(struct inode *inode, struct file *filp) -+{ -+ BOARD_IOC *board_ioc = filp->private_data; -+ -+ wait_event_interruptible(g_board_wait_queue, 1); -+ borad_ioc_free(board_ioc); -+ -+ return( 0 ); -+} -+ -+ -+static unsigned int board_poll(struct file *filp, struct poll_table_struct *wait) -+{ -+ unsigned int mask = 0; -+#if defined (WIRELESS) -+ BOARD_IOC *board_ioc = filp->private_data; -+#endif -+ -+ poll_wait(filp, &g_board_wait_queue, wait); -+#if defined (WIRELESS) -+ if(board_ioc->eventmask & SES_EVENTS){ -+ mask |= sesBtn_poll(filp, wait); -+ } -+#endif -+ -+ return mask; -+} -+ -+ -+static ssize_t board_read(struct file *filp, char __user *buffer, size_t count, loff_t *ppos) -+{ -+#if defined (WIRELESS) -+ BOARD_IOC *board_ioc = filp->private_data; -+ if(board_ioc->eventmask & SES_EVENTS){ -+ return sesBtn_read(filp, buffer, count, ppos); -+ } -+#endif -+ return 0; -+} -+ -+//************************************************************************************** -+// Utitlities for dump memory, free kernel pages, mips soft reset, etc. -+//************************************************************************************** -+ -+/*********************************************************************** -+ * Function Name: dumpaddr -+ * Description : Display a hex dump of the specified address. -+ ***********************************************************************/ -+void dumpaddr( unsigned char *pAddr, int nLen ) -+{ -+ static char szHexChars[] = "0123456789abcdef"; -+ char szLine[80]; -+ char *p = szLine; -+ unsigned char ch, *q; -+ int i, j; -+ unsigned long ul; -+ -+ while( nLen > 0 ) -+ { -+ sprintf( szLine, "%8.8lx: ", (unsigned long) pAddr ); -+ p = szLine + strlen(szLine); -+ -+ for(i = 0; i < 16 && nLen > 0; i += sizeof(long), nLen -= sizeof(long)) -+ { -+ ul = *(unsigned long *) &pAddr[i]; -+ q = (unsigned char *) &ul; -+ for( j = 0; j < sizeof(long); j++ ) -+ { -+ *p++ = szHexChars[q[j] >> 4]; -+ *p++ = szHexChars[q[j] & 0x0f]; -+ *p++ = ' '; -+ } -+ } -+ -+ for( j = 0; j < 16 - i; j++ ) -+ *p++ = ' ', *p++ = ' ', *p++ = ' '; -+ -+ *p++ = ' ', *p++ = ' ', *p++ = ' '; -+ -+ for( j = 0; j < i; j++ ) -+ { -+ ch = pAddr[j]; -+ *p++ = (ch > ' ' && ch < '~') ? ch : '.'; -+ } -+ -+ *p++ = '\0'; -+ printk( "%s\r\n", szLine ); -+ -+ pAddr += i; -+ } -+ printk( "\r\n" ); -+} /* dumpaddr */ -+ -+ -+void kerSysMipsSoftReset(void) -+{ -+#if defined(CONFIG_BCM96348) -+ if (PERF->RevID == 0x634800A1) { -+ typedef void (*FNPTR) (void); -+ FNPTR bootaddr = (FNPTR) FLASH_BASE; -+ int i; -+ -+ /* Disable interrupts. */ -+ //cli(); -+ spin_lock_irq(&board_lock); -+ -+ /* Reset all blocks. */ -+ PERF->BlockSoftReset &= ~BSR_ALL_BLOCKS; -+ for( i = 0; i < 1000000; i++ ) -+ ; -+ PERF->BlockSoftReset |= BSR_ALL_BLOCKS; -+ /* Jump to the power on address. */ -+ (*bootaddr) (); -+ } -+ else -+ PERF->pll_control |= SOFT_RESET; // soft reset mips -+#else -+ PERF->pll_control |= SOFT_RESET; // soft reset mips -+#endif -+} -+ -+ -+int kerSysGetMacAddress( unsigned char *pucaMacAddr, unsigned long ulId ) -+{ -+ int nRet = 0; -+ PMAC_ADDR_INFO pMai = NULL; -+ PMAC_ADDR_INFO pMaiFreeNoId = NULL; -+ PMAC_ADDR_INFO pMaiFreeId = NULL; -+ unsigned long i = 0, ulIdxNoId = 0, ulIdxId = 0, shiftedIdx = 0; -+ -+ /* CMO -- Fix le problème avec les adresses mac que l'on n'arrive pas -+ * * à relire plusieurs fois */ -+ /* inv_xde */ -+ if (boot_loader_type == BOOT_CFE) -+ memcpy( pucaMacAddr, g_pNvramInfo->ucaBaseMacAddr, -+ NVRAM_MAC_ADDRESS_LEN ); -+ else { -+ pucaMacAddr[0] = 0x00; -+ pucaMacAddr[1] = 0x07; -+ pucaMacAddr[2] = 0x3A; -+ pucaMacAddr[3] = 0xFF; -+ pucaMacAddr[4] = 0xFF; -+ pucaMacAddr[5] = 0xFF; -+ } -+ -+ return nRet; -+#if 0 -+ for( i = 0, pMai = g_pNvramInfo->MacAddrs; i < g_pNvramInfo->ulNumMacAddrs; -+ i++, pMai++ ) -+ { -+ if( ulId == pMai->ulId || ulId == MAC_ADDRESS_ANY ) -+ { -+ /* This MAC address has been used by the caller in the past. */ -+ memcpy( pucaMacAddr, g_pNvramInfo->ucaBaseMacAddr, -+ NVRAM_MAC_ADDRESS_LEN ); -+ shiftedIdx = i; -+ pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] += (shiftedIdx << SHIFT_BITS); -+ pMai->chInUse = 1; -+ pMaiFreeNoId = pMaiFreeId = NULL; -+ break; -+ } -+ else -+ if( pMai->chInUse == 0 ) -+ { -+ if( pMai->ulId == 0 && pMaiFreeNoId == NULL ) -+ { -+ /* This is an available MAC address that has never been -+ * used. -+ */ -+ pMaiFreeNoId = pMai; -+ ulIdxNoId = i; -+ } -+ else -+ if( pMai->ulId != 0 && pMaiFreeId == NULL ) -+ { -+ /* This is an available MAC address that has been used -+ * before. Use addresses that have never been used -+ * first, before using this one. -+ */ -+ pMaiFreeId = pMai; -+ ulIdxId = i; -+ } -+ } -+ } -+ -+ if( pMaiFreeNoId || pMaiFreeId ) -+ { -+ /* An available MAC address was found. */ -+ memcpy(pucaMacAddr, g_pNvramInfo->ucaBaseMacAddr,NVRAM_MAC_ADDRESS_LEN); -+ if( pMaiFreeNoId ) -+ { -+ shiftedIdx = ulIdxNoId; -+ pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] += (shiftedIdx << SHIFT_BITS); -+ pMaiFreeNoId->ulId = ulId; -+ pMaiFreeNoId->chInUse = 1; -+ } -+ else -+ { -+ shiftedIdx = ulIdxId; -+ pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] += (shiftedIdx << SHIFT_BITS); -+ pMaiFreeId->ulId = ulId; -+ pMaiFreeId->chInUse = 1; -+ } -+ } -+ else -+ if( i == g_pNvramInfo->ulNumMacAddrs ) -+ nRet = -EADDRNOTAVAIL; -+ -+ return( nRet ); -+#endif -+} /* kerSysGetMacAddr */ -+ -+int kerSysReleaseMacAddress( unsigned char *pucaMacAddr ) -+{ -+ int nRet = -EINVAL; -+ unsigned long ulIdx = 0; -+ int idx = (pucaMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET] - -+ g_pNvramInfo->ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN - CHANGED_OCTET]); -+ -+ // if overflow 255 (negitive), add 256 to have the correct index -+ if (idx < 0) -+ idx += 256; -+ ulIdx = (unsigned long) (idx >> SHIFT_BITS); -+ -+ if( ulIdx < g_pNvramInfo->ulNumMacAddrs ) -+ { -+ PMAC_ADDR_INFO pMai = &g_pNvramInfo->MacAddrs[ulIdx]; -+ if( pMai->chInUse == 1 ) -+ { -+ pMai->chInUse = 0; -+ nRet = 0; -+ } -+ } -+ -+ return( nRet ); -+} /* kerSysReleaseMacAddr */ -+ -+int kerSysGetSdramSize( void ) -+{ -+ if (boot_loader_type == BOOT_CFE) { -+ return( (int) g_pNvramInfo->ulSdramSize ); -+ } -+ else { -+ printk("kerSysGetSdramSize : 0x%08X\n", (int)getMemorySize() + 0x00040000); -+ return((int)getMemorySize() + 0x00040000); -+ } -+} /* kerSysGetSdramSize */ -+ -+ -+void kerSysLedCtrl(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState) -+{ -+ if (g_ledInitialized) -+ boardLedCtrl(ledName, ledState); -+} -+ -+unsigned int kerSysMonitorPollHook( struct file *f, struct poll_table_struct *t) -+{ -+ int mask = (*g_orig_fop_poll) (f, t); -+ -+ if( g_wakeup_monitor == 1 && g_monitor_file == f ) -+ { -+ /* If g_wakeup_monitor is non-0, the user mode application needs to -+ * return from a blocking select function. Return POLLPRI which will -+ * cause the select to return with the exception descriptor set. -+ */ -+ mask |= POLLPRI; -+ g_wakeup_monitor = 0; -+ } -+ -+ return( mask ); -+} -+ -+/* Put the user mode application that monitors link state on a run queue. */ -+void kerSysWakeupMonitorTask( void ) -+{ -+ g_wakeup_monitor = 1; -+ if( g_monitor_task ) -+ wake_up_process( g_monitor_task ); -+} -+ -+//<GPIOio; -+#endif -+#if defined(CONFIG_BCM96345) -+ unsigned short gpio_mask = GPIO_NUM_TO_MASK(gpio); -+ volatile unsigned short *gpio_reg = &GPIO->GPIOio; -+#endif -+#if defined(CONFIG_BCM96348) -+ unsigned long gpio_mask = GPIO_NUM_TO_MASK(gpio); -+ volatile unsigned long *gpio_reg = &GPIO->GPIOio; -+ -+ if( (gpio & ~BP_ACTIVE_MASK) >= 32 ) -+ { -+ gpio_mask = GPIO_NUM_TO_MASK_HIGH(gpio); -+ gpio_reg = &GPIO->GPIOio_high; -+ } -+#endif -+ //printk("gpio=%04x,gpio_mask=%04x,gpio_reg=%04x\n",gpio,gpio_mask,*gpio_reg); -+ if(*gpio_reg & gpio_mask) //press down -+ return RESET_BUTTON_UP; -+ } -+ return RESET_BUTTON_PRESSDOWN; -+} -+//< FLASH45_LENGTH_BOOT_ROM ) -+ { -+ printk("Illegal CFE size [%d]. Size allowed: [%d]\n", -+ ctrlParms.strLen, FLASH45_LENGTH_BOOT_ROM); -+ ret = -1; -+ break; -+ } -+ -+ // save NVRAM data into a local structure -+ memcpy( &SaveNvramData, pNvramData, sizeof(NVRAM_DATA) ); -+ -+ ret = kerSysBcmImageSet(ctrlParms.offset, ctrlParms.string, ctrlParms.strLen); -+ -+ // if nvram is not valid, restore the current nvram settings -+ if( BpSetBoardId( pNvramData->szBoardId ) != BP_SUCCESS && -+ *(unsigned long *) pNvramData == NVRAM_DATA_ID ) -+ { -+ kerSysNvRamSet((char *) &SaveNvramData, sizeof(SaveNvramData), 0); -+ } -+ } -+ else { -+ printk("RedBoot : not supported\n"); -+ return(-EINVAL); -+ } -+ break; -+ case BCM_IMAGE_FS: -+ if (boot_loader_type == BOOT_CFE) { -+ allowedSize = (int) flash_get_total_size() - FLASH_RESERVED_AT_END - TAG_LEN - FLASH45_LENGTH_BOOT_ROM; -+ if( ctrlParms.strLen <= 0 || ctrlParms.strLen > allowedSize) -+ { -+ printk("Illegal root file system size [%d]. Size allowed: [%d]\n", -+ ctrlParms.strLen, ctrlParms.offset - allowedSize); -+ ret = -1; -+ break; -+ } -+ ret = kerSysBcmImageSet(ctrlParms.offset, ctrlParms.string, ctrlParms.strLen); -+ kerSysMipsSoftReset(); -+ } -+ else { -+ printk("RedBoot : not supported\n"); -+ return(-EINVAL); -+ } -+ break; -+ -+ case BCM_IMAGE_KERNEL: // not used for now. -+ if (boot_loader_type == BOOT_CFE) { -+ allowedSize = (int) flash_get_total_size() - FLASH_RESERVED_AT_END - TAG_LEN - ctrlParms.offset; -+ -+ printk("kernel size = [%d]. Allowed size = [%d]\n", ctrlParms.strLen, allowedSize); -+ -+ if( ctrlParms.strLen <= 0 || ctrlParms.strLen > allowedSize ) -+ { -+ printk("Kernel size is over the limit by [%d] bytes\n", -+ ctrlParms.strLen - allowedSize); -+ ret = -1; -+ break; -+ } -+ ret = kerSysBcmImageSet(ctrlParms.offset, ctrlParms.string, ctrlParms.strLen); -+ } -+ else { -+ printk("RedBoot : not supported\n"); -+ return(-EINVAL); -+ } -+ break; -+ case BCM_IMAGE_WHOLE: -+ if (boot_loader_type == BOOT_CFE) { -+ if(ctrlParms.strLen <= 0) -+ { -+ printk("Illegal flash image size [%d].\n", ctrlParms.strLen); -+ ret = -1; -+ break; -+ } -+ -+ // save NVRAM data into a local structure -+ memcpy( &SaveNvramData, pNvramData, sizeof(NVRAM_DATA) ); -+ -+ ret = kerSysBcmImageSet(ctrlParms.offset, ctrlParms.string, ctrlParms.strLen); -+ -+ // if nvram is not valid, restore the current nvram settings -+ if( BpSetBoardId( pNvramData->szBoardId ) != BP_SUCCESS && -+ *(unsigned long *) pNvramData == NVRAM_DATA_ID ) -+ { -+ kerSysNvRamSet((char *) &SaveNvramData, sizeof(SaveNvramData), 0); -+ } -+ -+ kerSysMipsSoftReset(); -+ } -+ else { -+ printk("RedBoot : not supported\n"); -+ return(-EINVAL); -+ } -+ break; -+ -+ default: -+ ret = -EINVAL; -+ printk("flash_ioctl_command: invalid command %d\n", ctrlParms.action); -+ break; -+ } -+ ctrlParms.result = ret; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ } -+ else -+ ret = -EFAULT; -+ break; -+ -+ case BOARD_IOCTL_FLASH_READ: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) -+ { -+ switch (ctrlParms.action) -+ { -+ case SCRATCH_PAD: -+ if (boot_loader_type == BOOT_CFE) { -+ ret = kerSysScratchPadGet(ctrlParms.string, ctrlParms.buf, ctrlParms.offset); -+ } -+ else { -+ printk("RedBoot : not supported\n"); -+ return(-EINVAL); -+ } -+ break; -+ -+ case PERSISTENT: -+ if (boot_loader_type == BOOT_CFE) { -+ ret = kerSysPersistentGet(ctrlParms.string, ctrlParms.strLen, ctrlParms.offset); -+ } -+ else { -+ printk("RedBoot : not supported\n"); -+ return(-EINVAL); -+ } -+ break; -+ -+ case NVRAM: -+ if (boot_loader_type == BOOT_CFE) { -+ ret = kerSysNvRamGet(ctrlParms.string, ctrlParms.strLen, ctrlParms.offset); -+ } -+ else { -+ printk("RedBoot : not supported\n"); -+ return(-EINVAL); -+ } -+ break; -+ -+ case FLASH_SIZE: -+ if (boot_loader_type == BOOT_CFE) { -+ ret = kerSysFlashSizeGet(); -+ } -+ else { -+ printk("RedBoot : not supported\n"); -+ return(-EINVAL); -+ } -+ break; -+ -+ default: -+ ret = -EINVAL; -+ printk("Not supported. invalid command %d\n", ctrlParms.action); -+ break; -+ } -+ ctrlParms.result = ret; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ } -+ else -+ ret = -EFAULT; -+ break; -+ -+ case BOARD_IOCTL_GET_NR_PAGES: -+ ctrlParms.result = nr_free_pages() + get_page_cache_size(); -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ break; -+ -+ case BOARD_IOCTL_DUMP_ADDR: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) -+ { -+ dumpaddr( (unsigned char *) ctrlParms.string, ctrlParms.strLen ); -+ ctrlParms.result = 0; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } -+ else -+ ret = -EFAULT; -+ break; -+ -+ case BOARD_IOCTL_SET_MEMORY: -+ if (boot_loader_type == BOOT_CFE) { -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) -+ { -+ unsigned long *pul = (unsigned long *) ctrlParms.string; -+ unsigned short *pus = (unsigned short *) ctrlParms.string; -+ unsigned char *puc = (unsigned char *) ctrlParms.string; -+ switch( ctrlParms.strLen ) -+ { -+ case 4: -+ *pul = (unsigned long) ctrlParms.offset; -+ break; -+ case 2: -+ *pus = (unsigned short) ctrlParms.offset; -+ break; -+ case 1: -+ *puc = (unsigned char) ctrlParms.offset; -+ break; -+ } -+ dumpaddr( (unsigned char *) ctrlParms.string, sizeof(long) ); -+ ctrlParms.result = 0; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } -+ else -+ ret = -EFAULT; -+ } -+ else { -+ printk("RedBoot : not supported\n"); -+ return(-EINVAL); -+ -+ } -+ break; -+ -+ case BOARD_IOCTL_MIPS_SOFT_RESET: -+ kerSysMipsSoftReset(); -+ break; -+ -+ case BOARD_IOCTL_LED_CTRL: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) -+ { -+ kerSysLedCtrl((BOARD_LED_NAME)ctrlParms.strLen, (BOARD_LED_STATE)ctrlParms.offset); -+ ret = 0; -+ } -+ break; -+ -+ case BOARD_IOCTL_GET_ID: -+ if (boot_loader_type == BOOT_CFE) { -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, -+ sizeof(ctrlParms)) == 0) -+ { -+ if( ctrlParms.string ) -+ { -+ char *p = (char *) get_system_type(); -+ if( strlen(p) + 1 < ctrlParms.strLen ) -+ ctrlParms.strLen = strlen(p) + 1; -+ __copy_to_user(ctrlParms.string, p, ctrlParms.strLen); -+ } -+ -+ ctrlParms.result = 0; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, -+ sizeof(BOARD_IOCTL_PARMS)); -+ } -+ } -+ else { -+ printk("RedBoot : not supported\n"); -+ return(-EINVAL); -+ } -+ break; -+ -+ case BOARD_IOCTL_GET_MAC_ADDRESS: -+ if (boot_loader_type == BOOT_CFE) { -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) -+ { -+ ctrlParms.result = kerSysGetMacAddress( ucaMacAddr, -+ ctrlParms.offset ); -+ -+ if( ctrlParms.result == 0 ) -+ { -+ __copy_to_user(ctrlParms.string, ucaMacAddr, -+ sizeof(ucaMacAddr)); -+ } -+ -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, -+ sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } -+ else -+ ret = -EFAULT; -+ } -+ else { -+ printk("RedBoot : not supported\n"); -+ return(-EINVAL); -+ } -+ break; -+ -+ case BOARD_IOCTL_RELEASE_MAC_ADDRESS: -+ if (boot_loader_type == BOOT_CFE) { -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) -+ { -+ if (copy_from_user((void*)ucaMacAddr, (void*)ctrlParms.string, \ -+ NVRAM_MAC_ADDRESS_LEN) == 0) -+ { -+ ctrlParms.result = kerSysReleaseMacAddress( ucaMacAddr ); -+ } -+ else -+ { -+ ctrlParms.result = -EACCES; -+ } -+ -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, -+ sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } -+ else -+ ret = -EFAULT; -+ } -+ else { -+ printk("RedBoot : not supported\n"); -+ return(-EINVAL); -+ } -+ break; -+ -+ case BOARD_IOCTL_GET_PSI_SIZE: -+ if (boot_loader_type == BOOT_CFE) { -+ ctrlParms.result = (int) g_pNvramInfo->ulPsiSize; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } -+ else { -+ printk("RedBoot : not supported\n"); -+ return(-EINVAL); -+ } -+ break; -+ -+ case BOARD_IOCTL_GET_SDRAM_SIZE: -+ if (boot_loader_type == BOOT_CFE) { -+ ctrlParms.result = (int) g_pNvramInfo->ulSdramSize; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } -+ else { -+ printk("RedBoot : not supported\n"); -+ return(-EINVAL); -+ } -+ break; -+ -+ case BOARD_IOCTL_GET_BASE_MAC_ADDRESS: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) -+ { -+ __copy_to_user(ctrlParms.string, g_pNvramInfo->ucaBaseMacAddr, NVRAM_MAC_ADDRESS_LEN); -+ ctrlParms.result = 0; -+ -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, -+ sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } -+ else -+ ret = -EFAULT; -+ break; -+ -+ case BOARD_IOCTL_GET_CHIP_ID: -+ ctrlParms.result = (int) (PERF->RevID & 0xFFFF0000) >> 16; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ break; -+ -+ case BOARD_IOCTL_GET_NUM_ENET: { -+ ETHERNET_MAC_INFO EnetInfos[BP_MAX_ENET_MACS]; -+ int i, numeth = 0; -+ if (BpGetEthernetMacInfo(EnetInfos, BP_MAX_ENET_MACS) == BP_SUCCESS) { -+ for( i = 0; i < BP_MAX_ENET_MACS; i++) { -+ if (EnetInfos[i].ucPhyType != BP_ENET_NO_PHY) { -+ numeth++; -+ } -+ } -+ ctrlParms.result = numeth; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } -+ else { -+ ret = -EFAULT; -+ } -+ break; -+ } -+ -+ case BOARD_IOCTL_GET_CFE_VER: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) { -+ char *vertag = (char *)(FLASH_BASE + CFE_VERSION_OFFSET); -+ if (ctrlParms.strLen < CFE_VERSION_SIZE) { -+ ctrlParms.result = 0; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = -EFAULT; -+ } -+ else if (strncmp(vertag, "cfe-v", 5)) { // no tag info in flash -+ ctrlParms.result = 0; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } -+ else { -+ ctrlParms.result = 1; -+ __copy_to_user(ctrlParms.string, vertag+CFE_VERSION_MARK_SIZE, CFE_VERSION_SIZE); -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } -+ } -+ else { -+ ret = -EFAULT; -+ } -+ break; -+ -+ case BOARD_IOCTL_GET_ENET_CFG: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) { -+ ETHERNET_MAC_INFO EnetInfos[BP_MAX_ENET_MACS]; -+ if (BpGetEthernetMacInfo(EnetInfos, BP_MAX_ENET_MACS) == BP_SUCCESS) { -+ if (ctrlParms.strLen == sizeof(EnetInfos)) { -+ __copy_to_user(ctrlParms.string, EnetInfos, sizeof(EnetInfos)); -+ ctrlParms.result = 0; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } else -+ ret = -EFAULT; -+ } -+ else { -+ ret = -EFAULT; -+ } -+ break; -+ } -+ else { -+ ret = -EFAULT; -+ } -+ break; -+//<>JUNHON, 2004/09/15 -+ -+ -+#if defined (WIRELESS) -+ case BOARD_IOCTL_GET_WLAN_ANT_INUSE: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) { -+ unsigned short antInUse = 0; -+ if (BpGetWirelessAntInUse(&antInUse) == BP_SUCCESS) { -+ if (ctrlParms.strLen == sizeof(antInUse)) { -+ __copy_to_user(ctrlParms.string, &antInUse, sizeof(antInUse)); -+ ctrlParms.result = 0; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } else -+ ret = -EFAULT; -+ } -+ else { -+ ret = -EFAULT; -+ } -+ break; -+ } -+ else { -+ ret = -EFAULT; -+ } -+ break; -+#endif -+ case BOARD_IOCTL_SET_TRIGGER_EVENT: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) { -+ BOARD_IOC *board_ioc = (BOARD_IOC *)flip->private_data; -+ ctrlParms.result = -EFAULT; -+ ret = -EFAULT; -+ if (ctrlParms.strLen == sizeof(unsigned long)) { -+ board_ioc->eventmask |= *((int*)ctrlParms.string); -+#if defined (WIRELESS) -+ if((board_ioc->eventmask & SES_EVENTS)) { -+ if(sesBtn_irq != BP_NOT_DEFINED) { -+ BcmHalInterruptEnable(sesBtn_irq); -+ ctrlParms.result = 0; -+ ret = 0; -+ } -+ } -+#endif -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ } -+ break; -+ } -+ else { -+ ret = -EFAULT; -+ } -+ break; -+ -+ case BOARD_IOCTL_GET_TRIGGER_EVENT: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) { -+ BOARD_IOC *board_ioc = (BOARD_IOC *)flip->private_data; -+ if (ctrlParms.strLen == sizeof(unsigned long)) { -+ __copy_to_user(ctrlParms.string, &board_ioc->eventmask, sizeof(unsigned long)); -+ ctrlParms.result = 0; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } else -+ ret = -EFAULT; -+ -+ break; -+ } -+ else { -+ ret = -EFAULT; -+ } -+ break; -+ -+ case BOARD_IOCTL_UNSET_TRIGGER_EVENT: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) { -+ if (ctrlParms.strLen == sizeof(unsigned long)) { -+ BOARD_IOC *board_ioc = (BOARD_IOC *)flip->private_data; -+ board_ioc->eventmask &= (~(*((int*)ctrlParms.string))); -+ ctrlParms.result = 0; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } else -+ ret = -EFAULT; -+ -+ break; -+ } -+ else { -+ ret = -EFAULT; -+ } -+ break; -+#if defined (WIRELESS) -+ case BOARD_IOCTL_SET_SES_LED: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) { -+ if (ctrlParms.strLen == sizeof(int)) { -+ sesLed_ctrl(*(int*)ctrlParms.string); -+ ctrlParms.result = 0; -+ __copy_to_user((BOARD_IOCTL_PARMS*)arg, &ctrlParms, sizeof(BOARD_IOCTL_PARMS)); -+ ret = 0; -+ } else -+ ret = -EFAULT; -+ -+ break; -+ } -+ else { -+ ret = -EFAULT; -+ } -+ break; -+#endif -+ -+ case BOARD_IOCTL_SET_MONITOR_FD: -+ if (copy_from_user((void*)&ctrlParms, (void*)arg, sizeof(ctrlParms)) == 0) { -+ int fput_needed = 0; -+ -+ g_monitor_file = fget_light( ctrlParms.offset, &fput_needed ); -+ if( g_monitor_file ) { -+ /* Hook this file descriptor's poll function in order to set -+ * the exception descriptor when there is a change in link -+ * state. -+ */ -+ g_monitor_task = current; -+ g_orig_fop_poll = kerSysMonitorPollHook; -+ /*g_orig_fop_poll = g_monitor_file->f_op->poll; -+ g_monitor_file->f_op->poll = kerSysMonitorPollHook;*/ -+ } -+ } -+ break; -+ -+ case BOARD_IOCTL_WAKEUP_MONITOR_TASK: -+ kerSysWakeupMonitorTask(); -+ break; -+ -+ default: -+ ret = -EINVAL; -+ ctrlParms.result = 0; -+ printk("board_ioctl: invalid command %x, cmd %d .\n",command,_IOC_NR(command)); -+ break; -+ -+ } /* switch */ -+ -+ return (ret); -+ -+} /* board_ioctl */ -+ -+/*************************************************************************** -+ * SES Button ISR/GPIO/LED functions. -+ ***************************************************************************/ -+#if defined (WIRELESS) -+static irqreturn_t sesBtn_isr(int irq, void *dev_id, struct pt_regs *ptregs) -+{ -+#if defined(_BCM96338_) || defined(CONFIG_BCM96338) -+ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); -+ volatile unsigned long *gpio_reg = &GPIO->GPIOio; -+#endif -+#if defined(_BCM96345_) || defined(CONFIG_BCM96345) -+ unsigned short gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); -+ volatile unsigned short *gpio_reg = &GPIO->GPIOio; -+#endif -+#if defined(_BCM96348_) || defined (CONFIG_BCM96348) -+ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); -+ volatile unsigned long *gpio_reg = &GPIO->GPIOio; -+ -+ if( (sesBtn_gpio & ~BP_ACTIVE_MASK) >= 32 ) -+ { -+ gpio_mask = GPIO_NUM_TO_MASK_HIGH(sesBtn_gpio); -+ gpio_reg = &GPIO->GPIOio_high; -+ } -+#endif -+ -+ if (!(*gpio_reg & gpio_mask)){ -+ wake_up_interruptible(&g_board_wait_queue); -+ return IRQ_RETVAL(1); -+ } else { -+ return IRQ_RETVAL(0); -+ } -+} -+ -+static void __init sesBtn_mapGpio() -+{ -+ if( BpGetWirelessSesBtnGpio(&sesBtn_gpio) == BP_SUCCESS ) -+ { -+ printk("SES: Button GPIO 0x%x is enabled\n", sesBtn_gpio); -+ } -+} -+ -+static void __init sesBtn_mapIntr(int context) -+{ -+ if( BpGetWirelessSesExtIntr(&sesBtn_irq) == BP_SUCCESS ) -+ { -+ printk("SES: Button Interrupt 0x%x is enabled\n", sesBtn_irq); -+ } -+ else -+ return; -+ -+ sesBtn_irq += INTERRUPT_ID_EXTERNAL_0; -+ -+ if (BcmHalMapInterrupt((FN_HANDLER)sesBtn_isr, context, sesBtn_irq)) { -+ printk("SES: Interrupt mapping failed\n"); -+ } -+ BcmHalInterruptEnable(sesBtn_irq); -+} -+ -+ -+static unsigned int sesBtn_poll(struct file *file, struct poll_table_struct *wait) -+{ -+#if defined(_BCM96338_) || defined(CONFIG_BCM96338) -+ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); -+ volatile unsigned long *gpio_reg = &GPIO->GPIOio; -+#endif -+#if defined(_BCM96345_) || defined(CONFIG_BCM96345) -+ unsigned short gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); -+ volatile unsigned short *gpio_reg = &GPIO->GPIOio; -+#endif -+#if defined(_BCM96348_) || defined (CONFIG_BCM96348) -+ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); -+ volatile unsigned long *gpio_reg = &GPIO->GPIOio; -+ -+ if( (sesBtn_gpio & ~BP_ACTIVE_MASK) >= 32 ) -+ { -+ gpio_mask = GPIO_NUM_TO_MASK_HIGH(sesBtn_gpio); -+ gpio_reg = &GPIO->GPIOio_high; -+ } -+#endif -+ -+ if (!(*gpio_reg & gpio_mask)){ -+ return POLLIN; -+ } -+ return 0; -+} -+ -+static ssize_t sesBtn_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos) -+{ -+ volatile unsigned int event=0; -+ ssize_t ret=0; -+ -+#if defined(_BCM96338_) || defined (CONFIG_BCM96338) -+ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); -+ volatile unsigned long *gpio_reg = &GPIO->GPIOio; -+#endif -+#if defined(_BCM96345_) || defined (CONFIG_BCM96345) -+ unsigned short gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); -+ volatile unsigned short *gpio_reg = &GPIO->GPIOio; -+#endif -+#if defined(_BCM96348_) || defined (CONFIG_BCM96348) -+ unsigned long gpio_mask = GPIO_NUM_TO_MASK(sesBtn_gpio); -+ volatile unsigned long *gpio_reg = &GPIO->GPIOio; -+ -+ if( (sesBtn_gpio & ~BP_ACTIVE_MASK) >= 32 ) -+ { -+ gpio_mask = GPIO_NUM_TO_MASK_HIGH(sesBtn_gpio); -+ gpio_reg = &GPIO->GPIOio_high; -+ } -+#endif -+ -+ if(*gpio_reg & gpio_mask){ -+ BcmHalInterruptEnable(sesBtn_irq); -+ return ret; -+ } -+ event = SES_EVENTS; -+ __copy_to_user((char*)buffer, (char*)&event, sizeof(event)); -+ BcmHalInterruptEnable(sesBtn_irq); -+ count -= sizeof(event); -+ buffer += sizeof(event); -+ ret += sizeof(event); -+ return ret; -+} -+ -+static void __init sesLed_mapGpio() -+{ -+ if( BpGetWirelessSesBtnGpio(&sesLed_gpio) == BP_SUCCESS ) -+ { -+ printk("SES: LED GPIO 0x%x is enabled\n", sesBtn_gpio); -+ } -+} -+ -+static void sesLed_ctrl(int action) -+{ -+ -+ //char status = ((action >> 8) & 0xff); /* extract status */ -+ //char event = ((action >> 16) & 0xff); /* extract event */ -+ //char blinktype = ((action >> 24) & 0xff); /* extract blink type for SES_LED_BLINK */ -+ -+ BOARD_LED_STATE led; -+ -+ if(sesLed_gpio == BP_NOT_DEFINED) -+ return; -+ -+ action &= 0xff; /* extract led */ -+ -+ //printk("blinktype=%d, event=%d, status=%d\n",(int)blinktype, (int)event, (int)status); -+ -+ switch (action) -+ { -+ case SES_LED_ON: -+ //printk("SES: led on\n"); -+ led = kLedStateOn; -+ break; -+ case SES_LED_BLINK: -+ //printk("SES: led blink\n"); -+ led = kLedStateSlowBlinkContinues; -+ break; -+ case SES_LED_OFF: -+ default: -+ //printk("SES: led off\n"); -+ led = kLedStateOff; -+ } -+ -+ kerSysLedCtrl(kLedSes, led); -+} -+ -+static void __init ses_board_init() -+{ -+ sesBtn_mapGpio(); -+ sesBtn_mapIntr(0); -+ sesLed_mapGpio(); -+} -+static void __exit ses_board_deinit() -+{ -+ if(sesBtn_irq) -+ BcmHalInterruptDisable(sesBtn_irq); -+} -+#endif -+ -+/*************************************************************************** -+ * Dying gasp ISR and functions. -+ ***************************************************************************/ -+#define KERSYS_DBG printk -+ -+#if defined(CONFIG_BCM96345) -+#define CYCLE_PER_US 70 -+#elif defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338) -+/* The BCM6348 cycles per microsecond is really variable since the BCM6348 -+ * MIPS speed can vary depending on the PLL settings. However, an appoximate -+ * value of 120 will still work OK for the test being done. -+ */ -+#define CYCLE_PER_US 120 -+#endif -+#define DG_GLITCH_TO (100*CYCLE_PER_US) -+ -+static void __init kerSysDyingGaspMapIntr() -+{ -+ unsigned long ulIntr; -+ -+#if defined(CONFIG_BCM96348) || defined(_BCM96348_) || defined(CONFIG_BCM96338) || defined(_BCM96338_) -+ if( BpGetAdslDyingGaspExtIntr( &ulIntr ) == BP_SUCCESS ) { -+ BcmHalMapInterrupt((FN_HANDLER)kerSysDyingGaspIsr, 0, INTERRUPT_ID_DG); -+ BcmHalInterruptEnable( INTERRUPT_ID_DG ); -+ } -+#elif defined(CONFIG_BCM96345) || defined(_BCM96345_) -+ if( BpGetAdslDyingGaspExtIntr( &ulIntr ) == BP_SUCCESS ) { -+ ulIntr += INTERRUPT_ID_EXTERNAL_0; -+ BcmHalMapInterrupt((FN_HANDLER)kerSysDyingGaspIsr, 0, ulIntr); -+ BcmHalInterruptEnable( ulIntr ); -+ } -+#endif -+ -+} -+ -+void kerSysSetWdTimer(ulong timeUs) -+{ -+ TIMER->WatchDogDefCount = timeUs * (FPERIPH/1000000); -+ TIMER->WatchDogCtl = 0xFF00; -+ TIMER->WatchDogCtl = 0x00FF; -+} -+ -+ulong kerSysGetCycleCount(void) -+{ -+ ulong cnt; -+#ifdef _WIN32_WCE -+ cnt = 0; -+#else -+ __asm volatile("mfc0 %0, $9":"=d"(cnt)); -+#endif -+ return(cnt); -+} -+ -+static Bool kerSysDyingGaspCheckPowerLoss(void) -+{ -+ ulong clk0; -+ ulong ulIntr; -+ -+ ulIntr = 0; -+ clk0 = kerSysGetCycleCount(); -+ -+ UART->Data = 'D'; -+ UART->Data = '%'; -+ UART->Data = 'G'; -+ -+#if defined(CONFIG_BCM96345) -+ BpGetAdslDyingGaspExtIntr( &ulIntr ); -+ -+ do { -+ ulong clk1; -+ -+ clk1 = kerSysGetCycleCount(); /* time cleared */ -+ /* wait a little to get new reading */ -+ while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2) -+ ; -+ } while ((0 == (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT)))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO)); -+ -+ if (PERF->ExtIrqCfg & (1 << (ulIntr + EI_STATUS_SHFT))) { /* power glitch */ -+ BcmHalInterruptEnable( ulIntr + INTERRUPT_ID_EXTERNAL_0); -+ KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US); -+ return 0; -+ } -+#elif (defined(CONFIG_BCM96348) || defined(CONFIG_BCM96338)) && !defined(VXWORKS) -+ do { -+ ulong clk1; -+ -+ clk1 = kerSysGetCycleCount(); /* time cleared */ -+ /* wait a little to get new reading */ -+ while ((kerSysGetCycleCount()-clk1) < CYCLE_PER_US*2) -+ ; -+ } while ((PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET))) && ((kerSysGetCycleCount() - clk0) < DG_GLITCH_TO)); -+ -+ if (!(PERF->IrqStatus & (1 << (INTERRUPT_ID_DG - INTERNAL_ISR_TABLE_OFFSET)))) { -+ BcmHalInterruptEnable( INTERRUPT_ID_DG ); -+ KERSYS_DBG(" - Power glitch detected. Duration: %ld us\n", (kerSysGetCycleCount() - clk0)/CYCLE_PER_US); -+ return 0; -+ } -+#endif -+ return 1; -+} -+ -+static void kerSysDyingGaspShutdown( void ) -+{ -+ kerSysSetWdTimer(1000000); -+#if defined(CONFIG_BCM96345) -+ PERF->blkEnables &= ~(EMAC_CLK_EN | USB_CLK_EN | CPU_CLK_EN); -+#elif defined(CONFIG_BCM96348) -+ PERF->blkEnables &= ~(EMAC_CLK_EN | USBS_CLK_EN | USBH_CLK_EN | SAR_CLK_EN); -+#endif -+} -+ -+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) -+static irqreturn_t kerSysDyingGaspIsr(int irq, void * dev_id, struct pt_regs * regs) -+#else -+static unsigned int kerSysDyingGaspIsr(void) -+#endif -+{ -+ struct list_head *pos; -+ CB_DGASP_LIST *tmp, *dsl = NULL; -+ -+ if (kerSysDyingGaspCheckPowerLoss()) { -+ -+ /* first to turn off everything other than dsl */ -+ list_for_each(pos, &g_cb_dgasp_list_head->list) { -+ tmp = list_entry(pos, CB_DGASP_LIST, list); -+ if(strncmp(tmp->name, "dsl", 3)) { -+ (tmp->cb_dgasp_fn)(tmp->context); -+ }else { -+ dsl = tmp; -+ } -+ } -+ -+ /* now send dgasp */ -+ if(dsl) -+ (dsl->cb_dgasp_fn)(dsl->context); -+ -+ /* reset and shutdown system */ -+ kerSysDyingGaspShutdown(); -+ } -+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)) -+return( IRQ_HANDLED ); -+#else -+ return( 1 ); -+#endif -+} -+ -+static void __init kerSysInitDyingGaspHandler( void ) -+{ -+ CB_DGASP_LIST *new_node; -+ -+ if( g_cb_dgasp_list_head != NULL) { -+ printk("Error: kerSysInitDyingGaspHandler: list head is not null\n"); -+ return; -+ } -+ new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL); -+ memset(new_node, 0x00, sizeof(CB_DGASP_LIST)); -+ INIT_LIST_HEAD(&new_node->list); -+ g_cb_dgasp_list_head = new_node; -+ -+} /* kerSysInitDyingGaspHandler */ -+ -+static void __exit kerSysDeinitDyingGaspHandler( void ) -+{ -+ struct list_head *pos; -+ CB_DGASP_LIST *tmp; -+ -+ if(g_cb_dgasp_list_head == NULL) -+ return; -+ -+ list_for_each(pos, &g_cb_dgasp_list_head->list) { -+ tmp = list_entry(pos, CB_DGASP_LIST, list); -+ list_del(pos); -+ kfree(tmp); -+ } -+ -+ kfree(g_cb_dgasp_list_head); -+ g_cb_dgasp_list_head = NULL; -+ -+} /* kerSysDeinitDyingGaspHandler */ -+ -+void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context) -+{ -+ CB_DGASP_LIST *new_node; -+ -+ if( g_cb_dgasp_list_head == NULL) { -+ printk("Error: kerSysRegisterDyingGaspHandler: list head is null\n"); -+ return; -+ } -+ -+ if( devname == NULL || cbfn == NULL ) { -+ printk("Error: kerSysRegisterDyingGaspHandler: register info not enough (%s,%x,%x)\n", devname, (unsigned int)cbfn, (unsigned int)context); -+ return; -+ } -+ -+ new_node= (CB_DGASP_LIST *)kmalloc(sizeof(CB_DGASP_LIST), GFP_KERNEL); -+ memset(new_node, 0x00, sizeof(CB_DGASP_LIST)); -+ INIT_LIST_HEAD(&new_node->list); -+ strncpy(new_node->name, devname, IFNAMSIZ); -+ new_node->cb_dgasp_fn = (cb_dgasp_t)cbfn; -+ new_node->context = context; -+ list_add(&new_node->list, &g_cb_dgasp_list_head->list); -+ -+ printk("dgasp: kerSysRegisterDyingGaspHandler: %s registered \n", devname); -+ -+} /* kerSysRegisterDyingGaspHandler */ -+ -+void kerSysDeregisterDyingGaspHandler(char *devname) -+{ -+ struct list_head *pos; -+ CB_DGASP_LIST *tmp; -+ -+ if(g_cb_dgasp_list_head == NULL) { -+ printk("Error: kerSysDeregisterDyingGaspHandler: list head is null\n"); -+ return; -+ } -+ -+ if(devname == NULL) { -+ printk("Error: kerSysDeregisterDyingGaspHandler: devname is null\n"); -+ return; -+ } -+ -+ printk("kerSysDeregisterDyingGaspHandler: %s is deregistering\n", devname); -+ -+ list_for_each(pos, &g_cb_dgasp_list_head->list) { -+ tmp = list_entry(pos, CB_DGASP_LIST, list); -+ if(!strcmp(tmp->name, devname)) { -+ list_del(pos); -+ kfree(tmp); -+ printk("kerSysDeregisterDyingGaspHandler: %s is deregistered\n", devname); -+ return; -+ } -+ } -+ printk("kerSysDeregisterDyingGaspHandler: %s not (de)registered\n", devname); -+ -+} /* kerSysDeregisterDyingGaspHandler */ -+ -+/*************************************************************************** -+ * MACRO to call driver initialization and cleanup functions. -+ ***************************************************************************/ -+module_init( brcm_board_init ); -+module_exit( brcm_board_cleanup ); -+ -+EXPORT_SYMBOL(kerSysNvRamGet); -+EXPORT_SYMBOL(dumpaddr); -+EXPORT_SYMBOL(kerSysGetMacAddress); -+EXPORT_SYMBOL(kerSysReleaseMacAddress); -+EXPORT_SYMBOL(kerSysGetSdramSize); -+EXPORT_SYMBOL(kerSysLedCtrl); -+//<>JUNHON, 2004/09/15 -+EXPORT_SYMBOL(kerSysLedRegisterHwHandler); -+EXPORT_SYMBOL(BpGetBoardIds); -+EXPORT_SYMBOL(BpGetSdramSize); -+EXPORT_SYMBOL(BpGetPsiSize); -+EXPORT_SYMBOL(BpGetEthernetMacInfo); -+EXPORT_SYMBOL(BpGetRj11InnerOuterPairGpios); -+EXPORT_SYMBOL(BpGetPressAndHoldResetGpio); -+EXPORT_SYMBOL(BpGetVoipResetGpio); -+EXPORT_SYMBOL(BpGetVoipIntrGpio); -+EXPORT_SYMBOL(BpGetPcmciaResetGpio); -+EXPORT_SYMBOL(BpGetRtsCtsUartGpios); -+EXPORT_SYMBOL(BpGetAdslLedGpio); -+EXPORT_SYMBOL(BpGetAdslFailLedGpio); -+EXPORT_SYMBOL(BpGetWirelessLedGpio); -+EXPORT_SYMBOL(BpGetUsbLedGpio); -+EXPORT_SYMBOL(BpGetHpnaLedGpio); -+EXPORT_SYMBOL(BpGetWanDataLedGpio); -+EXPORT_SYMBOL(BpGetPppLedGpio); -+EXPORT_SYMBOL(BpGetPppFailLedGpio); -+EXPORT_SYMBOL(BpGetVoipLedGpio); -+EXPORT_SYMBOL(BpGetWirelessExtIntr); -+EXPORT_SYMBOL(BpGetAdslDyingGaspExtIntr); -+EXPORT_SYMBOL(BpGetVoipExtIntr); -+EXPORT_SYMBOL(BpGetHpnaExtIntr); -+EXPORT_SYMBOL(BpGetHpnaChipSelect); -+EXPORT_SYMBOL(BpGetVoipChipSelect); -+EXPORT_SYMBOL(BpGetWirelessSesBtnGpio); -+EXPORT_SYMBOL(BpGetWirelessSesExtIntr); -+EXPORT_SYMBOL(BpGetWirelessSesLedGpio); -+EXPORT_SYMBOL(kerSysRegisterDyingGaspHandler); -+EXPORT_SYMBOL(kerSysDeregisterDyingGaspHandler); -+EXPORT_SYMBOL(kerSysGetCycleCount); -+EXPORT_SYMBOL(kerSysSetWdTimer); -+EXPORT_SYMBOL(kerSysWakeupMonitorTask); -+ -diff -urN linux-2.6.17/arch/mips/brcm-boards/bcm963xx/boardparms.c linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/boardparms.c ---- linux-2.6.17/arch/mips/brcm-boards/bcm963xx/boardparms.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/boardparms.c 2006-08-03 16:36:58.000000000 +0200 -@@ -0,0 +1,2391 @@ -+/* -+<:copyright-gpl -+ -+ Copyright 2003 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+ -+:> -+*/ -+/************************************************************************** -+ * File Name : boardparms.c -+ * -+ * Description: This file contains the implementation for the BCM63xx board -+ * parameter access functions. -+ * -+ * Updates : 07/14/2003 Created. -+ ***************************************************************************/ -+ -+/* Includes. */ -+#include "boardparms.h" -+ -+/* Defines. */ -+ -+/* Default psi size in K bytes */ -+#define BP_PSI_DEFAULT_SIZE 24 -+ -+/* Typedefs */ -+typedef struct boardparameters -+{ -+ char szBoardId[BP_BOARD_ID_LEN]; /* board id string */ -+ ETHERNET_MAC_INFO EnetMacInfos[BP_MAX_ENET_MACS]; -+ VOIP_DSP_INFO VoIPDspInfo[BP_MAX_VOIP_DSP]; -+ unsigned short usSdramSize; /* SDRAM size and type */ -+ unsigned short usPsiSize; /* persistent storage in K bytes */ -+ unsigned short usGpioRj11InnerPair; /* GPIO pin or not defined */ -+ unsigned short usGpioRj11OuterPair; /* GPIO pin or not defined */ -+ unsigned short usGpioPressAndHoldReset; /* GPIO pin or not defined */ -+ unsigned short usGpioPcmciaReset; /* GPIO pin or not defined */ -+ unsigned short usGpioUartRts; /* GPIO pin or not defined */ -+ unsigned short usGpioUartCts; /* GPIO pin or not defined */ -+ unsigned short usGpioLedAdsl; /* GPIO pin or not defined */ -+ unsigned short usGpioLedAdslFail; /* GPIO pin or not defined */ -+ unsigned short usGpioLedWireless; /* GPIO pin or not defined */ -+ unsigned short usGpioLedUsb; /* GPIO pin or not defined */ -+ unsigned short usGpioLedHpna; /* GPIO pin or not defined */ -+ unsigned short usGpioLedWanData; /* GPIO pin or not defined */ -+ unsigned short usGpioLedPpp; /* GPIO pin or not defined */ -+ unsigned short usGpioLedPppFail; /* GPIO pin or not defined */ -+ unsigned short usGpioLedBlPowerOn; /* GPIO pin or not defined */ -+ unsigned short usGpioLedBlAlarm; /* GPIO pin or not defined */ -+ unsigned short usGpioLedBlResetCfg; /* GPIO pin or not defined */ -+ unsigned short usGpioLedBlStop; /* GPIO pin or not defined */ -+ unsigned short usExtIntrWireless; /* ext intr or not defined */ -+ unsigned short usExtIntrAdslDyingGasp; /* ext intr or not defined */ -+ unsigned short usExtIntrHpna; /* ext intr or not defined */ -+ unsigned short usCsHpna; /* chip select not defined */ -+ unsigned short usAntInUseWireless; /* antenna in use or not defined */ -+ unsigned short usGpioSesBtnWireless; /* GPIO pin or not defined */ -+ unsigned short usExtIntrSesBtnWireless; /* ext intr or not defined */ -+ unsigned short usGpioLedSesWireless; /* GPIO pin or not defined */ -+} BOARD_PARAMETERS, *PBOARD_PARAMETERS; -+ -+/* Variables */ -+#if defined(_BCM96338_) || defined(CONFIG_BCM96338) -+static BOARD_PARAMETERS g_bcm96338sv = -+{ -+ "96338SV", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_NOT_DEFINED, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_NOT_DEFINED, /* usGpioLedWanData */ -+ BP_NOT_DEFINED, /* usGpioLedPpp */ -+ BP_NOT_DEFINED, /* usGpioLedPppFail */ -+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */ -+ BP_NOT_DEFINED, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+static BOARD_PARAMETERS g_bcm96338l2m8m = -+{ -+ "96338L-2M-8M", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_GPIO_2_AL, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_3_AL, /* usGpioLedWanData */ -+ BP_GPIO_3_AL, /* usGpioLedPpp */ -+ BP_GPIO_4_AL, /* usGpioLedPppFail */ -+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ -+ BP_GPIO_1_AL, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+static PBOARD_PARAMETERS g_BoardParms[] = -+ {&g_bcm96338sv, &g_bcm96338l2m8m, 0}; -+#endif -+ -+#if defined(_BCM96345_) || defined(CONFIG_BCM96345) -+static BOARD_PARAMETERS g_bcm96345r = -+{ -+ "96345R", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_GPIO_11_AH, /* usGpioRj11InnerPair */ -+ BP_GPIO_12_AH, /* usGpioRj11OuterPair */ -+ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_GPIO_8_AH, /* usGpioLedAdsl */ -+ BP_NOT_DEFINED, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_8_AH, /* usGpioLedWanData */ -+ BP_GPIO_9_AH, /* usGpioLedPpp */ -+ BP_NOT_DEFINED, /* usGpioLedPppFail */ -+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ -+ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ -+ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */ -+ BP_GPIO_8_AH, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96345gw2 = -+{ -+ /* A hardware jumper determines whether GPIO 13 is used for Press and Hold -+ * Reset or RTS. -+ */ -+ "96345GW2", /* szBoardId */ -+ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ -+ 0x00, /* ucPhyAddress */ -+ BP_GPIO_0_AH, /* usGpioPhySpiSck */ -+ BP_GPIO_4_AH, /* usGpioPhySpiSs */ -+ BP_GPIO_12_AH, /* usGpioPhySpiMosi */ -+ BP_GPIO_11_AH, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x04, /* numSwitchPorts */ -+ BP_ENET_CONFIG_GPIO, /* usConfigType */ -+ BP_ENET_REVERSE_MII}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_DSP, /* ucDspType */ -+ 0x00, /* ucDspAddress */ -+ BP_EXT_INTR_1, /* usExtIntrVoip */ -+ BP_GPIO_6_AH, /* usGpioVoipReset */ -+ BP_GPIO_15_AH, /* usGpioVoipIntr */ -+ BP_NOT_DEFINED, /* usGpioLedVoip */ -+ BP_CS_2}, /* usCsVoip */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ -+ BP_GPIO_2_AH, /* usGpioPcmciaReset */ -+ BP_GPIO_13_AH, /* usGpioUartRts */ -+ BP_GPIO_9_AH, /* usGpioUartCts */ -+ BP_GPIO_8_AH, /* usGpioLedAdsl */ -+ BP_NOT_DEFINED, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_GPIO_7_AH, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_8_AH, /* usGpioLedWanData */ -+ BP_NOT_DEFINED, /* usGpioLedPpp */ -+ BP_NOT_DEFINED, /* usGpioLedPppFail */ -+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ -+ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ -+ BP_GPIO_7_AH, /* usGpioLedBlResetCfg */ -+ BP_GPIO_8_AH, /* usGpioLedBlStop */ -+ BP_EXT_INTR_2, /* usExtIntrWireless */ -+ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96345gw = -+{ -+ "96345GW", /* szBoardId */ -+ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ -+ 0x00, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x04, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_DSP, /* ucDspType */ -+ 0x00, /* ucDspAddress */ -+ BP_EXT_INTR_1, /* usExtIntrVoip */ -+ BP_GPIO_6_AH, /* usGpioVoipReset */ -+ BP_GPIO_15_AH, /* usGpioVoipIntr */ -+ BP_NOT_DEFINED, /* usGpioLedVoip */ -+ BP_CS_2}, /* usCsVoip */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_GPIO_11_AH, /* usGpioRj11InnerPair */ -+ BP_GPIO_1_AH, /* usGpioRj11OuterPair */ -+ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ -+ BP_GPIO_2_AH, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_GPIO_8_AH, /* usGpioLedAdsl */ -+ BP_NOT_DEFINED, /* usGpioLedAdslFail */ -+ BP_GPIO_10_AH, /* usGpioLedWireless */ -+ BP_GPIO_7_AH, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_8_AH, /* usGpioLedWanData */ -+ BP_NOT_DEFINED, /* usGpioLedPpp */ -+ BP_NOT_DEFINED, /* usGpioLedPppFail */ -+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ -+ BP_GPIO_9_AH, /* usGpioLedBlAlarm */ -+ BP_GPIO_10_AH, /* usGpioLedBlResetCfg */ -+ BP_GPIO_8_AH, /* usGpioLedBlStop */ -+ BP_EXT_INTR_2, /* usExtIntrWireless */ -+ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ -+ BP_EXT_INTR_3, /* usExtIntrHpna */ -+ BP_CS_1, /* usCsHpna */ -+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96335r = -+{ -+ "96335R", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_14_AH, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_GPIO_9_AH, /* usGpioLedAdsl */ -+ BP_NOT_DEFINED, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_9_AH, /* usGpioLedWanData */ -+ BP_GPIO_8_AH, /* usGpioLedPpp */ -+ BP_NOT_DEFINED, /* usGpioLedPppFail */ -+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ -+ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ -+ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */ -+ BP_GPIO_9_AH, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96345r0 = -+{ -+ "96345R0", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_GPIO_8_AH, /* usGpioLedAdsl */ -+ BP_NOT_DEFINED, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_9_AH, /* usGpioLedWanData */ -+ BP_GPIO_9_AH, /* usGpioLedPpp */ -+ BP_NOT_DEFINED, /* usGpioLedPppFail */ -+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ -+ BP_GPIO_9_AH, /* usGpioLedBlAlarm */ -+ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */ -+ BP_GPIO_8_AH, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96345rs = -+{ -+ "96345RS", /* szBoardId */ -+ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ -+ 0x00, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_GPIO_11_AH, /* usGpioRj11InnerPair */ -+ BP_GPIO_12_AH, /* usGpioRj11OuterPair */ -+ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_GPIO_8_AH, /* usGpioLedAdsl */ -+ BP_NOT_DEFINED, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_8_AH, /* usGpioLedWanData */ -+ BP_GPIO_9_AH, /* usGpioLedPpp */ -+ BP_NOT_DEFINED, /* usGpioLedPppFail */ -+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ -+ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ -+ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */ -+ BP_GPIO_8_AH, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static PBOARD_PARAMETERS g_BoardParms[] = -+ {&g_bcm96345r, &g_bcm96345gw2, &g_bcm96345gw, &g_bcm96335r, &g_bcm96345r0, -+ &g_bcm96345rs, 0}; -+#endif -+ -+#if defined(_BCM96348_) || defined(CONFIG_BCM96348) -+ -+static BOARD_PARAMETERS g_bcm96348r = -+{ -+ "96348R", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_GPIO_2_AL, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_3_AL, /* usGpioLedWanData */ -+ BP_GPIO_3_AL, /* usGpioLedPpp */ -+ BP_GPIO_4_AL, /* usGpioLedPppFail */ -+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ -+ BP_GPIO_1_AL, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96348lv = -+{ -+ "96348LV", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */ -+ 0x02, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_GPIO_5_AL, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}}, /* usReverseMii */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_GPIO_2_AL, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_3_AL, /* usGpioLedWanData */ -+ BP_GPIO_3_AL, /* usGpioLedPpp */ -+ BP_GPIO_4_AL, /* usGpioLedPppFail */ -+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ -+ BP_GPIO_1_AL, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96348gw = -+{ -+ "96348GW", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ -+ 0x00, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x03, /* numSwitchPorts */ -+ BP_ENET_CONFIG_SPI_SSB_0, /* usConfigType */ -+ BP_ENET_REVERSE_MII}}, /* usReverseMii */ -+ {{BP_VOIP_DSP, /* ucDspType */ -+ 0x00, /* ucDspAddress */ -+ BP_EXT_INTR_2, /* usExtIntrVoip */ -+ BP_GPIO_6_AH, /* usGpioVoipReset */ -+ BP_GPIO_34_AH, /* usGpioVoipIntr */ -+ BP_NOT_DEFINED, /* usGpioLedVoip */ -+ BP_CS_2}, /* usCsVoip */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_GPIO_2_AL, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_3_AL, /* usGpioLedWanData */ -+ BP_GPIO_3_AL, /* usGpioLedPpp */ -+ BP_GPIO_4_AL, /* usGpioLedPppFail */ -+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ -+ BP_GPIO_1_AL, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* BP_GPIO_35_AH, */ /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* BP_EXT_INTR_3, */ /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* BP_GPIO_0_AL */ /* usGpioLedSesWireless */ -+}; -+ -+ -+static BOARD_PARAMETERS g_bcm96348gw_10 = -+{ -+ "96348GW-10", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ -+ 0x00, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x03, /* numSwitchPorts */ -+ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ -+ BP_ENET_REVERSE_MII}}, /* usReverseMii */ -+ {{BP_VOIP_DSP, /* ucDspType */ -+ 0x00, /* ucDspAddress */ -+ BP_EXT_INTR_2, /* usExtIntrVoip */ -+ BP_GPIO_6_AH, /* usGpioVoipReset */ -+ BP_GPIO_34_AH, /* usGpioVoipIntr */ -+ BP_NOT_DEFINED, /* usGpioLedVoip */ -+ BP_CS_2}, /* usCsVoip */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_GPIO_2_AL, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_3_AL, /* usGpioLedWanData */ -+ BP_GPIO_3_AL, /* usGpioLedPpp */ -+ BP_GPIO_4_AL, /* usGpioLedPppFail */ -+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ -+ BP_GPIO_1_AL, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96348gw_11 = -+{ -+ "96348GW-11", /* szBoardId */ -+ {{BP_ENET_NO_PHY}, /* ucPhyType */ -+ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ -+ 0x00, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x04, /* numSwitchPorts */ -+ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ -+ BP_ENET_REVERSE_MII}}, /* usReverseMii */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_GPIO_2_AL, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_3_AL, /* usGpioLedWanData */ -+ BP_GPIO_3_AL, /* usGpioLedPpp */ -+ BP_GPIO_4_AL, /* usGpioLedPppFail */ -+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ -+ BP_GPIO_1_AL, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96348sv = -+{ -+ "96348SV", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */ -+ 0x1f, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}}, /* usReverseMii */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_32MB_2_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_NOT_DEFINED, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_NOT_DEFINED, /* usGpioLedWanData */ -+ BP_NOT_DEFINED, /* usGpioLedPpp */ -+ BP_NOT_DEFINED, /* usGpioLedPppFail */ -+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */ -+ BP_NOT_DEFINED, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+ -+static BOARD_PARAMETERS g_bcm96348gw_dualDsp = -+{ -+ "96348GW-DualDSP", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ -+ 0x00, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x03, /* numSwitchPorts */ -+ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ -+ BP_ENET_REVERSE_MII}}, /* usReverseMii */ -+ {{BP_VOIP_DSP, /* ucDspType */ -+ 0x00, /* ucDspAddress */ -+ BP_EXT_INTR_2, /* usExtIntrVoip */ -+ BP_UNEQUIPPED, /* usGpioVoipReset */ -+ BP_GPIO_34_AH, /* usGpioVoipIntr */ -+ BP_NOT_DEFINED, /* usGpioLedVoip */ -+ BP_CS_2}, /* usCsVoip */ -+ {BP_VOIP_DSP, /* ucDspType */ -+ 0x01, /* ucDspAddress */ -+ BP_EXT_INTR_3, /* usExtIntrVoip */ -+ BP_UNEQUIPPED , /* usGpioVoipReset */ -+ BP_GPIO_35_AH, /* usGpioVoipIntr */ -+ BP_NOT_DEFINED, /* usGpioLedVoip */ -+ BP_CS_3}}, /* usCsVoip */ -+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_GPIO_2_AL, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_3_AL, /* usGpioLedWanData */ -+ BP_GPIO_3_AL, /* usGpioLedPpp */ -+ BP_GPIO_4_AL, /* usGpioLedPppFail */ -+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ -+ BP_GPIO_1_AL, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+ -+static BOARD_PARAMETERS g_bcmCustom_01 = -+{ -+ "BCMCUST_01", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_NO_PHY, /* ucPhyType */ -+ 0x00, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ -+ BP_ENET_REVERSE_MII}}, /* usReverseMii */ -+ {{BP_VOIP_DSP, /* ucDspType */ -+ 0x00, /* ucDspAddress */ -+ BP_EXT_INTR_2, /* usExtIntrVoip */ -+ BP_GPIO_36_AH, /* usGpioVoipReset */ -+ BP_GPIO_34_AL, /* usGpioVoipIntr */ -+ BP_NOT_DEFINED, /* usGpioLedVoip */ -+ BP_CS_2}, /* usCsVoip */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_GPIO_2_AL, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_3_AL, /* usGpioLedWanData */ -+ BP_GPIO_3_AL, /* usGpioLedPpp */ -+ BP_GPIO_4_AL, /* usGpioLedPppFail */ -+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ -+ BP_GPIO_1_AL, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static PBOARD_PARAMETERS g_BoardParms[] = -+ {&g_bcm96348r, &g_bcm96348lv, &g_bcm96348gw, &g_bcm96348gw_10, -+ &g_bcm96348gw_11, &g_bcm96348sv, &g_bcm96348gw_dualDsp, -+ &g_bcmCustom_01, 0}; -+#endif -+ -+static PBOARD_PARAMETERS g_pCurrentBp = 0; -+ -+/************************************************************************** -+ * Name : bpstrcmp -+ * -+ * Description: String compare for this file so it does not depend on an OS. -+ * (Linux kernel and CFE share this source file.) -+ * -+ * Parameters : [IN] dest - destination string -+ * [IN] src - source string -+ * -+ * Returns : -1 - dest < src, 1 - dest > src, 0 dest == src -+ ***************************************************************************/ -+static int bpstrcmp(const char *dest,const char *src); -+static int bpstrcmp(const char *dest,const char *src) -+{ -+ while (*src && *dest) -+ { -+ if (*dest < *src) return -1; -+ if (*dest > *src) return 1; -+ dest++; -+ src++; -+ } -+ -+ if (*dest && !*src) return 1; -+ if (!*dest && *src) return -1; -+ return 0; -+} /* bpstrcmp */ -+ -+/************************************************************************** -+ * Name : BpGetVoipDspConfig -+ * -+ * Description: Gets the DSP configuration from the board parameter -+ * structure for a given DSP index. -+ * -+ * Parameters : [IN] dspNum - DSP index (number) -+ * -+ * Returns : Pointer to DSP configuration block if found/valid, NULL -+ * otherwise. -+ ***************************************************************************/ -+VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum ); -+VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum ) -+{ -+ VOIP_DSP_INFO *pDspConfig = 0; -+ int i; -+ -+ if( g_pCurrentBp ) -+ { -+ for( i = 0 ; i < BP_MAX_VOIP_DSP ; i++ ) -+ { -+ if( g_pCurrentBp->VoIPDspInfo[i].ucDspType != BP_VOIP_NO_DSP && -+ g_pCurrentBp->VoIPDspInfo[i].ucDspAddress == dspNum ) -+ { -+ pDspConfig = &g_pCurrentBp->VoIPDspInfo[i]; -+ break; -+ } -+ } -+ } -+ -+ return pDspConfig; -+} -+ -+ -+/************************************************************************** -+ * Name : BpSetBoardId -+ * -+ * Description: This function find the BOARD_PARAMETERS structure for the -+ * specified board id string and assigns it to a global, static -+ * variable. -+ * -+ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not -+ * have a board parameters configuration record. -+ ***************************************************************************/ -+int BpSetBoardId( char *pszBoardId ) -+{ -+ int nRet = BP_BOARD_ID_NOT_FOUND; -+ PBOARD_PARAMETERS *ppBp; -+ -+ for( ppBp = g_BoardParms; *ppBp; ppBp++ ) -+ { -+ if( !bpstrcmp((*ppBp)->szBoardId, pszBoardId) ) -+ { -+ g_pCurrentBp = *ppBp; -+ nRet = BP_SUCCESS; -+ break; -+ } -+ } -+ -+ return( nRet ); -+} /* BpSetBoardId */ -+ -+/************************************************************************** -+ * Name : BpGetBoardIds -+ * -+ * Description: This function returns all of the supported board id strings. -+ * -+ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id -+ * strings are returned in. Each id starts at BP_BOARD_ID_LEN -+ * boundary. -+ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that -+ * were allocated in pszBoardIds. -+ * -+ * Returns : Number of board id strings returned. -+ ***************************************************************************/ -+int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize ) -+{ -+ PBOARD_PARAMETERS *ppBp; -+ int i; -+ char *src; -+ char *dest; -+ -+ for( i = 0, ppBp = g_BoardParms; *ppBp && nBoardIdsSize; -+ i++, ppBp++, nBoardIdsSize--, pszBoardIds += BP_BOARD_ID_LEN ) -+ { -+ dest = pszBoardIds; -+ src = (*ppBp)->szBoardId; -+ while( *src ) -+ *dest++ = *src++; -+ *dest = '\0'; -+ } -+ -+ return( i ); -+} /* BpGetBoardIds */ -+ -+/************************************************************************** -+ * Name : BpGetEthernetMacInfo -+ * -+ * Description: This function returns all of the supported board id strings. -+ * -+ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO -+ * buffers. -+ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that -+ * are pointed to by pEnetInfos. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ ***************************************************************************/ -+int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos ) -+{ -+ int i, nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ ) -+ { -+ if( i < BP_MAX_ENET_MACS ) -+ { -+ unsigned char *src = (unsigned char *) -+ &g_pCurrentBp->EnetMacInfos[i]; -+ unsigned char *dest = (unsigned char *) pEnetInfos; -+ int len = sizeof(ETHERNET_MAC_INFO); -+ while( len-- ) -+ *dest++ = *src++; -+ } -+ else -+ pEnetInfos->ucPhyType = BP_ENET_NO_PHY; -+ } -+ -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ ) -+ pEnetInfos->ucPhyType = BP_ENET_NO_PHY; -+ -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetEthernetMacInfo */ -+ -+/************************************************************************** -+ * Name : BpGetSdramSize -+ * -+ * Description: This function returns a constant that describees the board's -+ * SDRAM type and size. -+ * -+ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size -+ * is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ ***************************************************************************/ -+int BpGetSdramSize( unsigned long *pulSdramSize ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pulSdramSize = g_pCurrentBp->usSdramSize; -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ *pulSdramSize = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetSdramSize */ -+ -+/************************************************************************** -+ * Name : BpGetPsiSize -+ * -+ * Description: This function returns the persistent storage size in K bytes. -+ * -+ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent -+ * storage size is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ ***************************************************************************/ -+int BpGetPsiSize( unsigned long *pulPsiSize ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pulPsiSize = g_pCurrentBp->usPsiSize; -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ *pulPsiSize = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetPsiSize */ -+ -+/************************************************************************** -+ * Name : BpGetRj11InnerOuterPairGpios -+ * -+ * Description: This function returns the GPIO pin assignments for changing -+ * between the RJ11 inner pair and RJ11 outer pair. -+ * -+ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair -+ * GPIO pin is returned in. -+ * [OUT] pusOuter - Address of short word that the RJ11 outer pair -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, values are returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner, -+ unsigned short *pusOuter ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusInner = g_pCurrentBp->usGpioRj11InnerPair; -+ *pusOuter = g_pCurrentBp->usGpioRj11OuterPair; -+ -+ if( g_pCurrentBp->usGpioRj11InnerPair != BP_NOT_DEFINED && -+ g_pCurrentBp->usGpioRj11OuterPair != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusInner = *pusOuter = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetRj11InnerOuterPairGpios */ -+ -+/************************************************************************** -+ * Name : BpGetPressAndHoldResetGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the press -+ * and hold reset button. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the press and hold -+ * reset button GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetPressAndHoldResetGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioPressAndHoldReset; -+ -+ if( g_pCurrentBp->usGpioPressAndHoldReset != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetPressAndHoldResetGpio */ -+ -+/************************************************************************** -+ * Name : BpGetVoipResetGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the VOIP -+ * Reset operation. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset -+ * GPIO pin is returned in. -+ * [IN] dspNum - Address of the DSP to query. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); -+ -+ if( pDspInfo ) -+ { -+ *pusValue = pDspInfo->usGpioVoipReset; -+ -+ if( *pusValue != BP_NOT_DEFINED || -+ *pusValue == BP_UNEQUIPPED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_FOUND; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetVoipResetGpio */ -+ -+/************************************************************************** -+ * Name : BpGetVoipIntrGpio -+ * -+ * Description: This function returns the GPIO pin assignment for VoIP interrupt. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt -+ * GPIO pin is returned in. -+ * [IN] dspNum - Address of the DSP to query. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); -+ -+ if( pDspInfo ) -+ { -+ *pusValue = pDspInfo->usGpioVoipIntr; -+ -+ if( *pusValue != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_FOUND; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetVoipIntrGpio */ -+ -+/************************************************************************** -+ * Name : BpGetPcmciaResetGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the PCMCIA -+ * Reset operation. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetPcmciaResetGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioPcmciaReset; -+ -+ if( g_pCurrentBp->usGpioPcmciaReset != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetPcmciaResetGpio */ -+ -+/************************************************************************** -+ * Name : BpGetUartRtsCtsGpios -+ * -+ * Description: This function returns the GPIO pin assignments for RTS and CTS -+ * UART signals. -+ * -+ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO -+ * pin is returned in. -+ * [OUT] pusCts - Address of short word that the UART CTS GPIO -+ * pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, values are returned. -+ * BP_BOARD_ID_NOT_SET - Error, board id input string does not -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusRts = g_pCurrentBp->usGpioUartRts; -+ *pusCts = g_pCurrentBp->usGpioUartCts; -+ -+ if( g_pCurrentBp->usGpioUartRts != BP_NOT_DEFINED && -+ g_pCurrentBp->usGpioUartCts != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusRts = *pusCts = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetUartRtsCtsGpios */ -+ -+/************************************************************************** -+ * Name : BpGetAdslLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the ADSL -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetAdslLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedAdsl; -+ -+ if( g_pCurrentBp->usGpioLedAdsl != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetAdslLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetAdslFailLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the ADSL -+ * LED that is used when there is a DSL connection failure. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetAdslFailLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedAdslFail; -+ -+ if( g_pCurrentBp->usGpioLedAdslFail != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetAdslFailLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetWirelessLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the Wireless -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedWireless; -+ -+ if( g_pCurrentBp->usGpioLedWireless != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetWirelessLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetWirelessAntInUse -+ * -+ * Description: This function returns the antennas in use for wireless -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna -+ * is in use. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessAntInUse( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usAntInUseWireless; -+ -+ if( g_pCurrentBp->usAntInUseWireless != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetWirelessAntInUse */ -+ -+/************************************************************************** -+ * Name : BpGetWirelessSesBtnGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the Wireless -+ * Ses Button. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessSesBtnGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioSesBtnWireless; -+ -+ if( g_pCurrentBp->usGpioSesBtnWireless != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetWirelessSesBtnGpio */ -+ -+/************************************************************************** -+ * Name : BpGetWirelessSesExtIntr -+ * -+ * Description: This function returns the external interrupt number for the -+ * Wireless Ses Button. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses -+ * external interrup is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessSesExtIntr( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usExtIntrSesBtnWireless; -+ -+ if( g_pCurrentBp->usExtIntrSesBtnWireless != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+ -+} /* BpGetWirelessSesExtIntr */ -+ -+/************************************************************************** -+ * Name : BpGetWirelessSesLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the Wireless -+ * Ses Led. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses -+ * Led GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessSesLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedSesWireless; -+ -+ if( g_pCurrentBp->usGpioLedSesWireless != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+ -+} /* BpGetWirelessSesLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetUsbLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the USB -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the USB LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetUsbLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedUsb; -+ -+ if( g_pCurrentBp->usGpioLedUsb != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetUsbLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetHpnaLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the HPNA -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetHpnaLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedHpna; -+ -+ if( g_pCurrentBp->usGpioLedHpna != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetHpnaLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetWanDataLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the WAN Data -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWanDataLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedWanData; -+ -+ if( g_pCurrentBp->usGpioLedWanData != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetWanDataLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetPppLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the PPP -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the PPP LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetPppLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedPpp; -+ -+ if( g_pCurrentBp->usGpioLedPpp != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetPppLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetPppFailLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the PPP -+ * LED that is used when there is a PPP connection failure. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the PPP LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetPppFailLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedPppFail; -+ -+ if( g_pCurrentBp->usGpioLedPppFail != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetPppFailLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetBootloaderPowerOnLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the power -+ * on LED that is set by the bootloader. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the alarm LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedBlPowerOn; -+ -+ if( g_pCurrentBp->usGpioLedBlPowerOn != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetBootloaderPowerOn */ -+ -+/************************************************************************** -+ * Name : BpGetBootloaderAlarmLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the alarm -+ * LED that is set by the bootloader. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the alarm LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedBlAlarm; -+ -+ if( g_pCurrentBp->usGpioLedBlAlarm != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetBootloaderAlarmLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetBootloaderResetCfgLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the reset -+ * configuration LED that is set by the bootloader. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the reset -+ * configuration LED GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedBlResetCfg; -+ -+ if( g_pCurrentBp->usGpioLedBlResetCfg != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetBootloaderResetCfgLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetBootloaderStopLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the break -+ * into bootloader LED that is set by the bootloader. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the break into -+ * bootloader LED GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetBootloaderStopLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedBlStop; -+ -+ if( g_pCurrentBp->usGpioLedBlStop != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetBootloaderStopLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetVoipLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the VOIP -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ * -+ * Note : The VoIP structure would allow for having one LED per DSP -+ * however, the board initialization function assumes only one -+ * LED per functionality (ie one LED for VoIP). Therefore in -+ * order to keep this tidy and simple we do not make usage of the -+ * one-LED-per-DSP function. Instead, we assume that the LED for -+ * VoIP is unique and associated with DSP 0 (always present on -+ * any VoIP platform). If changing this to a LED-per-DSP function -+ * then one need to update the board initialization driver in -+ * bcmdrivers\opensource\char\board\bcm963xx\impl1 -+ ***************************************************************************/ -+int BpGetVoipLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( 0 ); -+ -+ if( pDspInfo ) -+ { -+ *pusValue = pDspInfo->usGpioLedVoip; -+ -+ if( *pusValue != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_FOUND; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetVoipLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetWirelessExtIntr -+ * -+ * Description: This function returns the Wireless external interrupt number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the wireless -+ * external interrupt number is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessExtIntr( unsigned long *pulValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pulValue = g_pCurrentBp->usExtIntrWireless; -+ -+ if( g_pCurrentBp->usExtIntrWireless != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pulValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetWirelessExtIntr */ -+ -+/************************************************************************** -+ * Name : BpGetAdslDyingGaspExtIntr -+ * -+ * Description: This function returns the ADSL Dying Gasp external interrupt -+ * number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp -+ * external interrupt number is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pulValue = g_pCurrentBp->usExtIntrAdslDyingGasp; -+ -+ if( g_pCurrentBp->usExtIntrAdslDyingGasp != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pulValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetAdslDyingGaspExtIntr */ -+ -+/************************************************************************** -+ * Name : BpGetVoipExtIntr -+ * -+ * Description: This function returns the VOIP external interrupt number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the VOIP -+ * external interrupt number is returned in. -+ * [IN] dspNum - Address of the DSP to query. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); -+ -+ if( pDspInfo ) -+ { -+ *pulValue = pDspInfo->usExtIntrVoip; -+ -+ if( *pulValue != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pulValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_FOUND; -+ } -+ } -+ else -+ { -+ *pulValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetVoipExtIntr */ -+ -+/************************************************************************** -+ * Name : BpGetHpnaExtIntr -+ * -+ * Description: This function returns the HPNA external interrupt number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the HPNA -+ * external interrupt number is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetHpnaExtIntr( unsigned long *pulValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pulValue = g_pCurrentBp->usExtIntrHpna; -+ -+ if( g_pCurrentBp->usExtIntrHpna != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pulValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetHpnaExtIntr */ -+ -+/************************************************************************** -+ * Name : BpGetHpnaChipSelect -+ * -+ * Description: This function returns the HPNA chip select number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the HPNA -+ * chip select number is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetHpnaChipSelect( unsigned long *pulValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pulValue = g_pCurrentBp->usCsHpna; -+ -+ if( g_pCurrentBp->usCsHpna != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pulValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetHpnaChipSelect */ -+ -+/************************************************************************** -+ * Name : BpGetVoipChipSelect -+ * -+ * Description: This function returns the VOIP chip select number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the VOIP -+ * chip select number is returned in. -+ * [IN] dspNum - Address of the DSP to query. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); -+ -+ if( pDspInfo ) -+ { -+ *pulValue = pDspInfo->usCsVoip; -+ -+ if( *pulValue != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pulValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_FOUND; -+ } -+ } -+ else -+ { -+ *pulValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetVoipChipSelect */ -+ -diff -urN linux-2.6.17/arch/mips/brcm-boards/bcm963xx/boardparms.h linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/boardparms.h ---- linux-2.6.17/arch/mips/brcm-boards/bcm963xx/boardparms.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/boardparms.h 2006-08-03 16:36:58.000000000 +0200 -@@ -0,0 +1,758 @@ -+/* -+<:copyright-gpl -+ -+ Copyright 2003 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+ -+:> -+*/ -+/************************************************************************** -+ * File Name : boardparms.h -+ * -+ * Description: This file contains definitions and function prototypes for -+ * the BCM63xx board parameter access functions. -+ * -+ * Updates : 07/14/2003 Created. -+ ***************************************************************************/ -+ -+#if !defined(_BOARDPARMS_H) -+#define _BOARDPARMS_H -+ -+/* Return codes. */ -+#define BP_SUCCESS 0 -+#define BP_BOARD_ID_NOT_FOUND 1 -+#define BP_VALUE_NOT_DEFINED 2 -+#define BP_BOARD_ID_NOT_SET 3 -+ -+/* Values for BpGetSdramSize. */ -+#define BP_MEMORY_8MB_1_CHIP 0 -+#define BP_MEMORY_16MB_1_CHIP 1 -+#define BP_MEMORY_32MB_1_CHIP 2 -+#define BP_MEMORY_64MB_2_CHIP 3 -+#define BP_MEMORY_32MB_2_CHIP 4 -+#define BP_MEMORY_16MB_2_CHIP 5 -+ -+/* Values for EthernetMacInfo PhyType. */ -+#define BP_ENET_NO_PHY 0 -+#define BP_ENET_INTERNAL_PHY 1 -+#define BP_ENET_EXTERNAL_PHY 2 -+#define BP_ENET_EXTERNAL_SWITCH 3 -+ -+/* Values for EthernetMacInfo Configuration type. */ -+#define BP_ENET_CONFIG_MDIO 0 /* Internal PHY, External PHY, Switch+(no GPIO, no SPI, no MDIO Pseudo phy */ -+#define BP_ENET_CONFIG_GPIO 1 /* Bcm96345GW board + Bcm5325M/E */ -+#define BP_ENET_CONFIG_MDIO_PSEUDO_PHY 2 /* Bcm96348GW board + Bcm5325E */ -+#define BP_ENET_CONFIG_SPI_SSB_0 3 /* Bcm96348GW board + Bcm5325M/E */ -+#define BP_ENET_CONFIG_SPI_SSB_1 4 /* Bcm96348GW board + Bcm5325M/E */ -+#define BP_ENET_CONFIG_SPI_SSB_2 5 /* Bcm96348GW board + Bcm5325M/E */ -+#define BP_ENET_CONFIG_SPI_SSB_3 6 /* Bcm96348GW board + Bcm5325M/E */ -+ -+/* Values for EthernetMacInfo Reverse MII. */ -+#define BP_ENET_NO_REVERSE_MII 0 -+#define BP_ENET_REVERSE_MII 1 -+ -+/* Values for VoIPDSPInfo DSPType. */ -+#define BP_VOIP_NO_DSP 0 -+#define BP_VOIP_DSP 1 -+ -+ -+/* Values for GPIO pin assignments (AH = Active High, AL = Active Low). */ -+#define BP_ACTIVE_MASK 0x8000 -+#define BP_ACTIVE_HIGH 0x0000 -+#define BP_ACTIVE_LOW 0x8000 -+#define BP_GPIO_0_AH (0 | BP_ACTIVE_HIGH) -+#define BP_GPIO_0_AL (0 | BP_ACTIVE_LOW) -+#define BP_GPIO_1_AH (1 | BP_ACTIVE_HIGH) -+#define BP_GPIO_1_AL (1 | BP_ACTIVE_LOW) -+#define BP_GPIO_2_AH (2 | BP_ACTIVE_HIGH) -+#define BP_GPIO_2_AL (2 | BP_ACTIVE_LOW) -+#define BP_GPIO_3_AH (3 | BP_ACTIVE_HIGH) -+#define BP_GPIO_3_AL (3 | BP_ACTIVE_LOW) -+#define BP_GPIO_4_AH (4 | BP_ACTIVE_HIGH) -+#define BP_GPIO_4_AL (4 | BP_ACTIVE_LOW) -+#define BP_GPIO_5_AH (5 | BP_ACTIVE_HIGH) -+#define BP_GPIO_5_AL (5 | BP_ACTIVE_LOW) -+#define BP_GPIO_6_AH (6 | BP_ACTIVE_HIGH) -+#define BP_GPIO_6_AL (6 | BP_ACTIVE_LOW) -+#define BP_GPIO_7_AH (7 | BP_ACTIVE_HIGH) -+#define BP_GPIO_7_AL (7 | BP_ACTIVE_LOW) -+#define BP_GPIO_8_AH (8 | BP_ACTIVE_HIGH) -+#define BP_GPIO_8_AL (8 | BP_ACTIVE_LOW) -+#define BP_GPIO_9_AH (9 | BP_ACTIVE_HIGH) -+#define BP_GPIO_9_AL (9 | BP_ACTIVE_LOW) -+#define BP_GPIO_10_AH (10 | BP_ACTIVE_HIGH) -+#define BP_GPIO_10_AL (10 | BP_ACTIVE_LOW) -+#define BP_GPIO_11_AH (11 | BP_ACTIVE_HIGH) -+#define BP_GPIO_11_AL (11 | BP_ACTIVE_LOW) -+#define BP_GPIO_12_AH (12 | BP_ACTIVE_HIGH) -+#define BP_GPIO_12_AL (12 | BP_ACTIVE_LOW) -+#define BP_GPIO_13_AH (13 | BP_ACTIVE_HIGH) -+#define BP_GPIO_13_AL (13 | BP_ACTIVE_LOW) -+#define BP_GPIO_14_AH (14 | BP_ACTIVE_HIGH) -+#define BP_GPIO_14_AL (14 | BP_ACTIVE_LOW) -+#define BP_GPIO_15_AH (15 | BP_ACTIVE_HIGH) -+#define BP_GPIO_15_AL (15 | BP_ACTIVE_LOW) -+#define BP_GPIO_16_AH (16 | BP_ACTIVE_HIGH) -+#define BP_GPIO_16_AL (16 | BP_ACTIVE_LOW) -+#define BP_GPIO_17_AH (17 | BP_ACTIVE_HIGH) -+#define BP_GPIO_17_AL (17 | BP_ACTIVE_LOW) -+#define BP_GPIO_18_AH (18 | BP_ACTIVE_HIGH) -+#define BP_GPIO_18_AL (18 | BP_ACTIVE_LOW) -+#define BP_GPIO_19_AH (19 | BP_ACTIVE_HIGH) -+#define BP_GPIO_19_AL (19 | BP_ACTIVE_LOW) -+#define BP_GPIO_20_AH (20 | BP_ACTIVE_HIGH) -+#define BP_GPIO_20_AL (20 | BP_ACTIVE_LOW) -+#define BP_GPIO_21_AH (21 | BP_ACTIVE_HIGH) -+#define BP_GPIO_21_AL (21 | BP_ACTIVE_LOW) -+#define BP_GPIO_22_AH (22 | BP_ACTIVE_HIGH) -+#define BP_GPIO_22_AL (22 | BP_ACTIVE_LOW) -+#define BP_GPIO_23_AH (23 | BP_ACTIVE_HIGH) -+#define BP_GPIO_23_AL (23 | BP_ACTIVE_LOW) -+#define BP_GPIO_24_AH (24 | BP_ACTIVE_HIGH) -+#define BP_GPIO_24_AL (24 | BP_ACTIVE_LOW) -+#define BP_GPIO_25_AH (25 | BP_ACTIVE_HIGH) -+#define BP_GPIO_25_AL (25 | BP_ACTIVE_LOW) -+#define BP_GPIO_26_AH (26 | BP_ACTIVE_HIGH) -+#define BP_GPIO_26_AL (26 | BP_ACTIVE_LOW) -+#define BP_GPIO_27_AH (27 | BP_ACTIVE_HIGH) -+#define BP_GPIO_27_AL (27 | BP_ACTIVE_LOW) -+#define BP_GPIO_28_AH (28 | BP_ACTIVE_HIGH) -+#define BP_GPIO_28_AL (28 | BP_ACTIVE_LOW) -+#define BP_GPIO_29_AH (29 | BP_ACTIVE_HIGH) -+#define BP_GPIO_29_AL (29 | BP_ACTIVE_LOW) -+#define BP_GPIO_30_AH (30 | BP_ACTIVE_HIGH) -+#define BP_GPIO_30_AL (30 | BP_ACTIVE_LOW) -+#define BP_GPIO_31_AH (31 | BP_ACTIVE_HIGH) -+#define BP_GPIO_31_AL (31 | BP_ACTIVE_LOW) -+#define BP_GPIO_32_AH (32 | BP_ACTIVE_HIGH) -+#define BP_GPIO_32_AL (32 | BP_ACTIVE_LOW) -+#define BP_GPIO_33_AH (33 | BP_ACTIVE_HIGH) -+#define BP_GPIO_33_AL (33 | BP_ACTIVE_LOW) -+#define BP_GPIO_34_AH (34 | BP_ACTIVE_HIGH) -+#define BP_GPIO_34_AL (34 | BP_ACTIVE_LOW) -+#define BP_GPIO_35_AH (35 | BP_ACTIVE_HIGH) -+#define BP_GPIO_35_AL (35 | BP_ACTIVE_LOW) -+#define BP_GPIO_36_AH (36 | BP_ACTIVE_HIGH) -+#define BP_GPIO_36_AL (36 | BP_ACTIVE_LOW) -+ -+/* Values for external interrupt assignments. */ -+#define BP_EXT_INTR_0 0 -+#define BP_EXT_INTR_1 1 -+#define BP_EXT_INTR_2 2 -+#define BP_EXT_INTR_3 3 -+ -+/* Values for chip select assignments. */ -+#define BP_CS_0 0 -+#define BP_CS_1 1 -+#define BP_CS_2 2 -+#define BP_CS_3 3 -+ -+/* Value for GPIO and external interrupt fields that are not used. */ -+#define BP_NOT_DEFINED 0xffff -+#define BP_HW_DEFINED 0xfff0 -+#define BP_UNEQUIPPED 0xfff1 -+ -+/* Maximum size of the board id string. */ -+#define BP_BOARD_ID_LEN 16 -+ -+/* Maximum number of Ethernet MACs. */ -+#define BP_MAX_ENET_MACS 2 -+ -+/* Maximum number of VoIP DSPs. */ -+#define BP_MAX_VOIP_DSP 2 -+ -+/* Wireless Antenna Settings. */ -+#define BP_WLAN_ANT_MAIN 0 -+#define BP_WLAN_ANT_AUX 1 -+#define BP_WLAN_ANT_BOTH 3 -+ -+#if !defined(__ASSEMBLER__) -+ -+/* Information about an Ethernet MAC. If ucPhyType is BP_ENET_NO_PHY, -+ * then the other fields are not valid. -+ */ -+typedef struct EthernetMacInfo -+{ -+ unsigned char ucPhyType; /* BP_ENET_xxx */ -+ unsigned char ucPhyAddress; /* 0 to 31 */ -+ unsigned short usGpioPhySpiSck; /* GPIO pin or not defined */ -+ unsigned short usGpioPhySpiSs; /* GPIO pin or not defined */ -+ unsigned short usGpioPhySpiMosi; /* GPIO pin or not defined */ -+ unsigned short usGpioPhySpiMiso; /* GPIO pin or not defined */ -+ unsigned short usGpioPhyReset; /* GPIO pin or not defined (96348LV) */ -+ unsigned short numSwitchPorts; /* Number of PHY ports */ -+ unsigned short usConfigType; /* Configuration type */ -+ unsigned short usReverseMii; /* Reverse MII */ -+} ETHERNET_MAC_INFO, *PETHERNET_MAC_INFO; -+ -+ -+/* Information about VoIP DSPs. If ucDspType is BP_VOIP_NO_DSP, -+ * then the other fields are not valid. -+ */ -+typedef struct VoIPDspInfo -+{ -+ unsigned char ucDspType; -+ unsigned char ucDspAddress; -+ unsigned short usExtIntrVoip; -+ unsigned short usGpioVoipReset; -+ unsigned short usGpioVoipIntr; -+ unsigned short usGpioLedVoip; -+ unsigned short usCsVoip; -+ -+} VOIP_DSP_INFO; -+ -+ -+/************************************************************************** -+ * Name : BpSetBoardId -+ * -+ * Description: This function find the BOARD_PARAMETERS structure for the -+ * specified board id string and assigns it to a global, static -+ * variable. -+ * -+ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not -+ * have a board parameters configuration record. -+ ***************************************************************************/ -+int BpSetBoardId( char *pszBoardId ); -+ -+/************************************************************************** -+ * Name : BpGetBoardIds -+ * -+ * Description: This function returns all of the supported board id strings. -+ * -+ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id -+ * strings are returned in. Each id starts at BP_BOARD_ID_LEN -+ * boundary. -+ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that -+ * were allocated in pszBoardIds. -+ * -+ * Returns : Number of board id strings returned. -+ ***************************************************************************/ -+int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize ); -+ -+/************************************************************************** -+ * Name : BpGetEthernetMacInfo -+ * -+ * Description: This function returns all of the supported board id strings. -+ * -+ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO -+ * buffers. -+ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that -+ * are pointed to by pEnetInfos. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ ***************************************************************************/ -+int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos ); -+ -+/************************************************************************** -+ * Name : BpGetSdramSize -+ * -+ * Description: This function returns a constant that describees the board's -+ * SDRAM type and size. -+ * -+ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size -+ * is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ ***************************************************************************/ -+int BpGetSdramSize( unsigned long *pulSdramSize ); -+ -+/************************************************************************** -+ * Name : BpGetPsiSize -+ * -+ * Description: This function returns the persistent storage size in K bytes. -+ * -+ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent -+ * storage size is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ ***************************************************************************/ -+int BpGetPsiSize( unsigned long *pulPsiSize ); -+ -+/************************************************************************** -+ * Name : BpGetRj11InnerOuterPairGpios -+ * -+ * Description: This function returns the GPIO pin assignments for changing -+ * between the RJ11 inner pair and RJ11 outer pair. -+ * -+ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair -+ * GPIO pin is returned in. -+ * [OUT] pusOuter - Address of short word that the RJ11 outer pair -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, values are returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner, -+ unsigned short *pusOuter ); -+ -+/************************************************************************** -+ * Name : BpGetPressAndHoldResetGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the press -+ * and hold reset button. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the press and hold -+ * reset button GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetPressAndHoldResetGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetVoipResetGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the VOIP -+ * Reset operation. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset -+ * GPIO pin is returned in. -+ * [IN] dspNum - Address of the DSP to query. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetVoipIntrGpio -+ * -+ * Description: This function returns the GPIO pin assignment for VoIP interrupt. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt -+ * GPIO pin is returned in. -+ * [IN] dspNum - Address of the DSP to query. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetPcmciaResetGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the PCMCIA -+ * Reset operation. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetPcmciaResetGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetUartRtsCtsGpios -+ * -+ * Description: This function returns the GPIO pin assignments for RTS and CTS -+ * UART signals. -+ * -+ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO -+ * pin is returned in. -+ * [OUT] pusCts - Address of short word that the UART CTS GPIO -+ * pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, values are returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts ); -+ -+/************************************************************************** -+ * Name : BpGetAdslLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the ADSL -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetAdslLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetAdslFailLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the ADSL -+ * LED that is used when there is a DSL connection failure. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetAdslFailLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetWirelessLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the Wireless -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetWirelessAntInUse -+ * -+ * Description: This function returns the antennas in use for wireless -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna -+ * is in use. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessAntInUse( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetWirelessSesBtnGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the Wireless -+ * Ses Button. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses -+ * Button GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessSesBtnGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetWirelessSesExtIntr -+ * -+ * Description: This function returns the external interrupt number for the -+ * Wireless Ses Button. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses -+ * external interrup is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessSesExtIntr( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetWirelessSesLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the Wireless -+ * Ses Led. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses -+ * Led GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessSesLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetUsbLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the USB -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the USB LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetUsbLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetHpnaLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the HPNA -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetHpnaLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetWanDataLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the WAN Data -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWanDataLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetPppLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the PPP -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the PPP LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetPppLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetPppFailLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the PPP -+ * LED that is used when there is a PPP connection failure. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the PPP LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetPppFailLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetVoipLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the VOIP -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetBootloaderPowerOnLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the power -+ * on LED that is set by the bootloader. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the alarm LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetBootloaderAlarmLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the alarm -+ * LED that is set by the bootloader. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the alarm LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetBootloaderResetCfgLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the reset -+ * configuration LED that is set by the bootloader. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the reset -+ * configuration LED GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetBootloaderStopLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the break -+ * into bootloader LED that is set by the bootloader. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the break into -+ * bootloader LED GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetBootloaderStopLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetWirelessExtIntr -+ * -+ * Description: This function returns the Wireless external interrupt number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the wireless -+ * external interrupt number is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessExtIntr( unsigned long *pulValue ); -+ -+/************************************************************************** -+ * Name : BpGetAdslDyingGaspExtIntr -+ * -+ * Description: This function returns the ADSL Dying Gasp external interrupt -+ * number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp -+ * external interrupt number is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue ); -+ -+/************************************************************************** -+ * Name : BpGetVoipExtIntr -+ * -+ * Description: This function returns the VOIP external interrupt number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the VOIP -+ * external interrupt number is returned in. -+ * [IN] dspNum - Address of the DSP to query. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue ); -+ -+/************************************************************************** -+ * Name : BpGetHpnaExtIntr -+ * -+ * Description: This function returns the HPNA external interrupt number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the HPNA -+ * external interrupt number is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetHpnaExtIntr( unsigned long *pulValue ); -+ -+/************************************************************************** -+ * Name : BpGetHpnaChipSelect -+ * -+ * Description: This function returns the HPNA chip select number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the HPNA -+ * chip select number is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetHpnaChipSelect( unsigned long *pulValue ); -+ -+/************************************************************************** -+ * Name : BpGetVoipChipSelect -+ * -+ * Description: This function returns the VOIP chip select number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the VOIP -+ * chip select number is returned in. -+ * [IN] dspNum - Address of the DSP to query. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue ); -+ -+#endif /* __ASSEMBLER__ */ -+ -+#endif /* _BOARDPARMS_H */ -+ -diff -urN linux-2.6.17/arch/mips/brcm-boards/bcm963xx/cfiflash.c linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/cfiflash.c ---- linux-2.6.17/arch/mips/brcm-boards/bcm963xx/cfiflash.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/cfiflash.c 2006-08-03 16:36:58.000000000 +0200 -@@ -0,0 +1,692 @@ -+/************************************************************************/ -+/* */ -+/* AMD CFI Enabled Flash Memory Drivers */ -+/* File name: CFIFLASH.C */ -+/* Revision: 1.0 5/07/98 */ -+/* */ -+/* Copyright (c) 1998 ADVANCED MICRO DEVICES, INC. All Rights Reserved. */ -+/* This software is unpublished and contains the trade secrets and */ -+/* confidential proprietary information of AMD. Unless otherwise */ -+/* provided in the Software Agreement associated herewith, it is */ -+/* licensed in confidence "AS IS" and is not to be reproduced in whole */ -+/* or part by any means except for backup. Use, duplication, or */ -+/* disclosure by the Government is subject to the restrictions in */ -+/* paragraph (b) (3) (B) of the Rights in Technical Data and Computer */ -+/* Software clause in DFAR 52.227-7013 (a) (Oct 1988). */ -+/* Software owned by */ -+/* Advanced Micro Devices, Inc., */ -+/* One AMD Place, */ -+/* P.O. Box 3453 */ -+/* Sunnyvale, CA 94088-3453. */ -+/************************************************************************/ -+/* This software constitutes a basic shell of source code for */ -+/* programming all AMD Flash components. AMD */ -+/* will not be responsible for misuse or illegal use of this */ -+/* software for devices not supported herein. AMD is providing */ -+/* this source code "AS IS" and will not be responsible for */ -+/* issues arising from incorrect user implementation of the */ -+/* source code herein. It is the user's responsibility to */ -+/* properly design-in this source code. */ -+/* */ -+/************************************************************************/ -+#ifdef _CFE_ -+#include "lib_types.h" -+#include "lib_printf.h" -+#include "lib_string.h" -+#include "cfe_timer.h" -+#define printk printf -+#else // linux -+#include -+#include -+#include -+#endif -+ -+#include "cfiflash.h" -+ -+static int flash_wait(WORD sector, int offset, UINT16 data); -+static UINT16 flash_get_device_id(void); -+static int flash_get_cfi(struct cfi_query *query, UINT16 *cfi_struct, int flashFamily); -+static int flash_write(WORD sector, int offset, byte *buf, int nbytes); -+static void flash_command(int command, WORD sector, int offset, UINT16 data); -+ -+/*********************************************************************/ -+/* 'meminfo' should be a pointer, but most C compilers will not */ -+/* allocate static storage for a pointer without calling */ -+/* non-portable functions such as 'new'. We also want to avoid */ -+/* the overhead of passing this pointer for every driver call. */ -+/* Systems with limited heap space will need to do this. */ -+/*********************************************************************/ -+struct flashinfo meminfo; /* Flash information structure */ -+static int flashFamily = FLASH_UNDEFINED; -+static int totalSize = 0; -+static struct cfi_query query; -+ -+static UINT16 cfi_data_struct_29W160[] = { -+ 0x0020, 0x0049, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0x0051, 0x0052, 0x0059, 0x0002, 0x0000, 0x0040, 0x0000, 0x0000, -+ 0x0000, 0x0000, 0x0000, 0x0027, 0x0036, 0x0000, 0x0000, 0x0004, -+ 0x0000, 0x000a, 0x0000, 0x0004, 0x0000, 0x0003, 0x0000, 0x0015, -+ 0x0002, 0x0000, 0x0000, 0x0000, 0x0004, 0x0000, 0x0000, 0x0040, -+ 0x0000, 0x0001, 0x0000, 0x0020, 0x0000, 0x0000, 0x0000, 0x0080, -+ 0x0000, 0x001e, 0x0000, 0x0000, 0x0001, 0xffff, 0xffff, 0xffff, -+ 0x0050, 0x0052, 0x0049, 0x0031, 0x0030, 0x0000, 0x0002, 0x0001, -+ 0x0001, 0x0004, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0x0002, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0x0888, 0x252b, 0x8c84, 0x7dbc, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, -+ 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff, 0xffff -+}; -+ -+ -+/*********************************************************************/ -+/* Init_flash is used to build a sector table from the information */ -+/* provided through the CFI query. This information is translated */ -+/* from erase_block information to base:offset information for each */ -+/* individual sector. This information is then stored in the meminfo */ -+/* structure, and used throughout the driver to access sector */ -+/* information. */ -+/* */ -+/* This is more efficient than deriving the sector base:offset */ -+/* information every time the memory map switches (since on the */ -+/* development platform can only map 64k at a time). If the entire */ -+/* flash memory array can be mapped in, then the addition static */ -+/* allocation for the meminfo structure can be eliminated, but the */ -+/* drivers will have to be re-written. */ -+/* */ -+/* The meminfo struct occupies 653 bytes of heap space, depending */ -+/* on the value of the define MAXSECTORS. Adjust to suit */ -+/* application */ -+/*********************************************************************/ -+byte flash_init(void) -+{ -+ int i=0, j=0, count=0; -+ int basecount=0L; -+ UINT16 device_id; -+ int flipCFIGeometry = FALSE; -+ -+ /* First, assume -+ * a single 8k sector for sector 0. This is to allow -+ * the system to perform memory mapping to the device, -+ * even though the actual physical layout is unknown. -+ * Once mapped in, the CFI query will produce all -+ * relevant information. -+ */ -+ meminfo.addr = 0L; -+ meminfo.areg = 0; -+ meminfo.nsect = 1; -+ meminfo.bank1start = 0; -+ meminfo.bank2start = 0; -+ -+ meminfo.sec[0].size = 8192; -+ meminfo.sec[0].base = 0x00000; -+ meminfo.sec[0].bank = 1; -+ -+ flash_command(FLASH_RESET, 0, 0, 0); -+ -+ device_id = flash_get_device_id(); -+ -+ switch (device_id) { -+ case ID_I28F160C3B: -+ case ID_I28F320C3B: -+ case ID_I28F160C3T: -+ case ID_I28F320C3T: -+ flashFamily = FLASH_INTEL; -+ break; -+ case ID_AM29DL800B: -+ case ID_AM29LV800B: -+ case ID_AM29LV400B: -+ case ID_AM29LV160B: -+ case ID_AM29LV320B: -+ case ID_MX29LV320AB: -+ case ID_AM29LV320MB: -+ case ID_AM29DL800T: -+ case ID_AM29LV800T: -+ case ID_AM29LV160T: -+ case ID_AM29LV320T: -+ case ID_MX29LV320AT: -+ case ID_AM29LV320MT: -+ flashFamily = FLASH_AMD; -+ break; -+ case ID_SST39VF1601: -+ case ID_SST39VF3201: -+ flashFamily = FLASH_SST; -+ break; -+ default: -+ printk("Flash memory not supported! Device id = %x\n", device_id); -+ return -1; -+ } -+ -+ if (flash_get_cfi(&query, 0, flashFamily) == -1) { -+ switch(device_id) { -+ case ID_AM29LV160T: -+ case ID_AM29LV160B: -+ flash_get_cfi(&query, cfi_data_struct_29W160, flashFamily); -+ break; -+ default: -+ printk("CFI data structure not found. Device id = %x\n", device_id); -+ return -1; -+ } -+ } -+ -+ // need to determine if it top or bottom boot here -+ switch (device_id) -+ { -+ case ID_AM29DL800B: -+ case ID_AM29LV800B: -+ case ID_AM29LV400B: -+ case ID_AM29LV160B: -+ case ID_AM29LV320B: -+ case ID_MX29LV320AB: -+ case ID_AM29LV320MB: -+ case ID_I28F160C3B: -+ case ID_I28F320C3B: -+ case ID_I28F160C3T: -+ case ID_I28F320C3T: -+ case ID_SST39VF1601: -+ case ID_SST39VF3201: -+ flipCFIGeometry = FALSE; -+ break; -+ case ID_AM29DL800T: -+ case ID_AM29LV800T: -+ case ID_AM29LV160T: -+ case ID_AM29LV320T: -+ case ID_MX29LV320AT: -+ case ID_AM29LV320MT: -+ flipCFIGeometry = TRUE; -+ break; -+ default: -+ printk("Flash memory not supported! Device id = %x\n", device_id); -+ return -1; -+ } -+ -+ count=0;basecount=0L; -+ -+ if (!flipCFIGeometry) -+ { -+ for (i=0; i= 0; i--) { -+ for(j=0; j relative_addr ) -+ { -+ blk_start--; // last blk, dec by 1 -+ } -+ else -+ if( blk_start == last_blk ) -+ { -+ printk("Address is too big.\n"); -+ blk_start = -1; -+ } -+ -+ return( blk_start ); -+} -+ -+/************************************************************************/ -+/* The purpose of flash_get_total_size() is to return the total size of */ -+/* the flash */ -+/************************************************************************/ -+int flash_get_total_size() -+{ -+ return totalSize; -+} -+ -+/*********************************************************************/ -+/* Flash_command() is the main driver function. It performs */ -+/* every possible command available to AMD B revision */ -+/* flash parts. Note that this command is not used directly, but */ -+/* rather called through the API wrapper functions provided below. */ -+/*********************************************************************/ -+static void flash_command(int command, WORD sector, int offset, UINT16 data) -+{ -+ volatile UINT16 *flashptr; -+ volatile UINT16 *flashbase; -+ -+ flashptr = (UINT16 *) flash_get_memptr(sector); -+ flashbase = (UINT16 *) flash_get_memptr(0); -+ -+ switch (flashFamily) { -+ case FLASH_UNDEFINED: -+ /* These commands should work for AMD, Intel and SST flashes */ -+ switch (command) { -+ case FLASH_RESET: -+ flashptr[0] = 0xF0; -+ flashptr[0] = 0xFF; -+ break; -+ case FLASH_READ_ID: -+ flashptr[0x5555] = 0xAA; /* unlock 1 */ -+ flashptr[0x2AAA] = 0x55; /* unlock 2 */ -+ flashptr[0x5555] = 0x90; -+ break; -+ default: -+ break; -+ } -+ break; -+ case FLASH_AMD: -+ switch (command) { -+ case FLASH_RESET: -+ flashptr[0] = 0xF0; -+ break; -+ case FLASH_READ_ID: -+ flashptr[0x555] = 0xAA; /* unlock 1 */ -+ flashptr[0x2AA] = 0x55; /* unlock 2 */ -+ flashptr[0x555] = 0x90; -+ break; -+ case FLASH_CFIQUERY: -+ flashptr[0x55] = 0x98; -+ break; -+ case FLASH_UB: -+ flashptr[0x555] = 0xAA; /* unlock 1 */ -+ flashptr[0x2AA] = 0x55; /* unlock 2 */ -+ flashptr[0x555] = 0x20; -+ break; -+ case FLASH_PROG: -+ flashptr[0] = 0xA0; -+ flashptr[offset/2] = data; -+ break; -+ case FLASH_UBRESET: -+ flashptr[0] = 0x90; -+ flashptr[0] = 0x00; -+ break; -+ case FLASH_SERASE: -+ flashptr[0x555] = 0xAA; /* unlock 1 */ -+ flashptr[0x2AA] = 0x55; /* unlock 2 */ -+ flashptr[0x555] = 0x80; -+ flashptr[0x555] = 0xAA; -+ flashptr[0x2AA] = 0x55; -+ flashptr[0] = 0x30; -+ break; -+ default: -+ break; -+ } -+ break; -+ case FLASH_INTEL: -+ switch (command) { -+ case FLASH_RESET: -+ flashptr[0] = 0xFF; -+ break; -+ case FLASH_READ_ID: -+ flashptr[0] = 0x90; -+ break; -+ case FLASH_CFIQUERY: -+ flashptr[0] = 0x98; -+ break; -+ case FLASH_PROG: -+ flashptr[0] = 0x40; -+ flashptr[offset/2] = data; -+ break; -+ case FLASH_SERASE: -+ flashptr[0] = 0x60; -+ flashptr[0] = 0xD0; -+ flashptr[0] = 0x20; -+ flashptr[0] = 0xD0; -+ break; -+ default: -+ break; -+ } -+ break; -+ case FLASH_SST: -+ switch (command) { -+ case FLASH_RESET: -+ flashbase[0x5555] = 0xAA; /* unlock 1 */ -+ flashbase[0x2AAA] = 0x55; /* unlock 2 */ -+ flashbase[0x5555] = 0xf0; -+ break; -+ case FLASH_READ_ID: -+ flashbase[0x5555] = 0xAA; /* unlock 1 */ -+ flashbase[0x2AAA] = 0x55; /* unlock 2 */ -+ flashbase[0x5555] = 0x90; -+ break; -+ case FLASH_CFIQUERY: -+ flashbase[0x5555] = 0xAA; /* unlock 1 */ -+ flashbase[0x2AAA] = 0x55; /* unlock 2 */ -+ flashbase[0x5555] = 0x98; -+ break; -+ case FLASH_UB: -+ break; -+ case FLASH_PROG: -+ flashbase[0x5555] = 0xAA; /* unlock 1 */ -+ flashbase[0x2AAA] = 0x55; /* unlock 2 */ -+ flashbase[0x5555] = 0xa0; -+ flashptr[offset/2] = data; -+ break; -+ case FLASH_UBRESET: -+ break; -+ case FLASH_SERASE: -+ flashbase[0x5555] = 0xAA; /* unlock 1 */ -+ flashbase[0x2AAA] = 0x55; /* unlock 2 */ -+ flashbase[0x5555] = 0x80; -+ flashbase[0x5555] = 0xAA; -+ flashbase[0x2AAA] = 0x55; -+ flashptr[0] = 0x30; -+ break; -+ default: -+ break; -+ } -+ break; -+ default: -+ break; -+ } -+} -+ -+/*********************************************************************/ -+/* flash_write extends the functionality of flash_program() by */ -+/* providing an faster way to program multiple data words, without */ -+/* needing the function overhead of looping algorithms which */ -+/* program word by word. This function utilizes fast pointers */ -+/* to quickly loop through bulk data. */ -+/*********************************************************************/ -+static int flash_write(WORD sector, int offset, byte *buf, int nbytes) -+{ -+ UINT16 *src; -+ src = (UINT16 *)buf; -+ -+ if ((nbytes | offset) & 1) { -+ return -1; -+ } -+ -+ flash_command(FLASH_UB, 0, 0, 0); -+ while (nbytes > 0) { -+ flash_command(FLASH_PROG, sector, offset, *src); -+ if (flash_wait(sector, offset, *src) != STATUS_READY) -+ break; -+ offset +=2; -+ nbytes -=2; -+ src++; -+ } -+ flash_command(FLASH_UBRESET, 0, 0, 0); -+ -+ return (byte*)src - buf; -+} -+ -+/*********************************************************************/ -+/* flash_wait utilizes the DQ6, DQ5, and DQ2 polling algorithms */ -+/* described in the flash data book. It can quickly ascertain the */ -+/* operational status of the flash device, and return an */ -+/* appropriate status code (defined in flash.h) */ -+/*********************************************************************/ -+static int flash_wait(WORD sector, int offset, UINT16 data) -+{ -+ volatile UINT16 *flashptr; /* flash window */ -+ UINT16 d1; -+ -+ flashptr = (UINT16 *) flash_get_memptr(sector); -+ -+ if (flashFamily == FLASH_AMD || flashFamily == FLASH_SST) { -+#if defined(_BCM96338_) || defined(CONFIG_BCM96338) -+ do { -+ d1 = flashptr[offset/2]; -+ if (d1 == data) -+ return STATUS_READY; -+ } while (!(d1 & 0x20)); -+ -+ d1 = flashptr[offset/2]; -+ -+ if (d1 != data) { -+ flash_command(FLASH_RESET, 0, 0, 0); -+ return STATUS_TIMEOUT; -+ } -+#else -+ do { -+ d1 = *flashptr; /* read data */ -+ d1 ^= *flashptr; /* read it again and see what toggled */ -+ if (d1 == 0) /* no toggles, nothing's happening */ -+ return STATUS_READY; -+ } while (!(d1 & 0x20)); -+ -+ d1 = *flashptr; /* read data */ -+ d1 ^= *flashptr; /* read it again and see what toggled */ -+ -+ if (d1 != 0) { -+ flash_command(FLASH_RESET, 0, 0, 0); -+ return STATUS_TIMEOUT; -+ } -+#endif -+ } else if (flashFamily == FLASH_INTEL) { -+ flashptr[0] = 0x70; -+ /* Wait for completion */ -+ while(!(*flashptr & 0x80)); -+ if (*flashptr & 0x30) { -+ flashptr[0] = 0x50; -+ flash_command(FLASH_RESET, 0, 0, 0); -+ return STATUS_TIMEOUT; -+ } -+ flashptr[0] = 0x50; -+ flash_command(FLASH_RESET, 0, 0, 0); -+ } -+ -+ return STATUS_READY; -+} -+ -+/*********************************************************************/ -+/* flash_get_device_id() will perform an autoselect sequence on the */ -+/* flash device, and return the device id of the component. */ -+/* This function automatically resets to read mode. */ -+/*********************************************************************/ -+static UINT16 flash_get_device_id() -+{ -+ volatile UINT16 *fwp; /* flash window */ -+ UINT16 answer; -+ -+ fwp = (UINT16 *)flash_get_memptr(0); -+ -+ flash_command(FLASH_READ_ID, 0, 0, 0); -+ answer = *(fwp + 1); -+ if (answer == ID_AM29LV320M) { -+ answer = *(fwp + 0xe); -+ answer = *(fwp + 0xf); -+ } -+ -+ flash_command(FLASH_RESET, 0, 0, 0); -+ return( (UINT16) answer ); -+} -+ -+/*********************************************************************/ -+/* flash_get_cfi() is the main CFI workhorse function. Due to it's */ -+/* complexity and size it need only be called once upon */ -+/* initializing the flash system. Once it is called, all operations */ -+/* are performed by looking at the meminfo structure. */ -+/* All possible care was made to make this algorithm as efficient as */ -+/* possible. 90% of all operations are memory reads, and all */ -+/* calculations are done using bit-shifts when possible */ -+/*********************************************************************/ -+static int flash_get_cfi(struct cfi_query *query, UINT16 *cfi_struct, int flashFamily) -+{ -+ volatile UINT16 *fwp; /* flash window */ -+ int i=0; -+ -+ flash_command(FLASH_CFIQUERY, 0, 0, 0); -+ -+ if (cfi_struct == 0) -+ fwp = (UINT16 *)flash_get_memptr(0); -+ else -+ fwp = cfi_struct; -+ -+ /* Initial house-cleaning */ -+ for(i=0; i < 8; i++) { -+ query->erase_block[i].sector_size = 0; -+ query->erase_block[i].num_sectors = 0; -+ } -+ -+ /* If not 'QRY', then we dont have a CFI enabled device in the socket */ -+ if( fwp[0x10] != 'Q' && -+ fwp[0x11] != 'R' && -+ fwp[0x12] != 'Y') { -+ flash_command(FLASH_RESET, 0, 0, 0); -+ return(-1); -+ } -+ -+ query->num_erase_blocks = fwp[0x2C]; -+ if(flashFamily == FLASH_SST) -+ query->num_erase_blocks = 1; -+ -+ for(i=0; i < query->num_erase_blocks; i++) { -+ query->erase_block[i].num_sectors = fwp[(0x2D+(4*i))] + (fwp[0x2E + (4*i)] << 8); -+ query->erase_block[i].num_sectors++; -+ query->erase_block[i].sector_size = 256 * (256 * fwp[(0x30+(4*i))] + fwp[(0x2F+(4*i))]); -+ } -+ -+ flash_command(FLASH_RESET, 0, 0, 0); -+ return(1); -+} -diff -urN linux-2.6.17/arch/mips/brcm-boards/bcm963xx/cfiflash.h linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/cfiflash.h ---- linux-2.6.17/arch/mips/brcm-boards/bcm963xx/cfiflash.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/cfiflash.h 2006-08-03 16:36:58.000000000 +0200 -@@ -0,0 +1,142 @@ -+/************************************************************************/ -+/* */ -+/* AMD CFI Enabled Flash Memory Drivers */ -+/* File name: CFIFLASH.H */ -+/* Revision: 1.0 5/07/98 */ -+/* */ -+/* Copyright (c) 1998 ADVANCED MICRO DEVICES, INC. All Rights Reserved. */ -+/* This software is unpublished and contains the trade secrets and */ -+/* confidential proprietary information of AMD. Unless otherwise */ -+/* provided in the Software Agreement associated herewith, it is */ -+/* licensed in confidence "AS IS" and is not to be reproduced in whole */ -+/* or part by any means except for backup. Use, duplication, or */ -+/* disclosure by the Government is subject to the restrictions in */ -+/* paragraph (b) (3) (B) of the Rights in Technical Data and Computer */ -+/* Software clause in DFAR 52.227-7013 (a) (Oct 1988). */ -+/* Software owned by */ -+/* Advanced Micro Devices, Inc., */ -+/* One AMD Place, */ -+/* P.O. Box 3453 */ -+/* Sunnyvale, CA 94088-3453. */ -+/************************************************************************/ -+/* This software constitutes a basic shell of source code for */ -+/* programming all AMD Flash components. AMD */ -+/* will not be responsible for misuse or illegal use of this */ -+/* software for devices not supported herein. AMD is providing */ -+/* this source code "AS IS" and will not be responsible for */ -+/* issues arising from incorrect user implementation of the */ -+/* source code herein. It is the user's responsibility to */ -+/* properly design-in this source code. */ -+/* */ -+/************************************************************************/ -+#ifndef _CFIFLASH_H -+#define _CFIFLASH_H -+ -+/* include board/CPU specific definitions */ -+#include "bcmtypes.h" -+#include "board.h" -+ -+#define FLASH_BASE_ADDR_REG FLASH_BASE -+ -+#ifndef NULL -+#define NULL 0 -+#endif -+ -+#define MAXSECTORS 1024 /* maximum number of sectors supported */ -+ -+/* A structure for identifying a flash part. There is one for each -+ * of the flash part definitions. We need to keep track of the -+ * sector organization, the address register used, and the size -+ * of the sectors. -+ */ -+struct flashinfo { -+ char *name; /* "Am29DL800T", etc. */ -+ unsigned long addr; /* physical address, once translated */ -+ int areg; /* Can be set to zero for all parts */ -+ int nsect; /* # of sectors -- 19 in LV, 22 in DL */ -+ int bank1start; /* first sector # in bank 1 */ -+ int bank2start; /* first sector # in bank 2, if DL part */ -+ struct { -+ long size; /* # of bytes in this sector */ -+ long base; /* offset from beginning of device */ -+ int bank; /* 1 or 2 for DL; 1 for LV */ -+ } sec[MAXSECTORS]; /* per-sector info */ -+}; -+ -+/* -+ * This structure holds all CFI query information as defined -+ * in the JEDEC standard. All information up to -+ * primary_extended_query is standard among all manufactures -+ * with CFI enabled devices. -+ */ -+ -+struct cfi_query { -+ int num_erase_blocks; /* Number of sector defs. */ -+ struct { -+ unsigned long sector_size; /* byte size of sector */ -+ int num_sectors; /* Num sectors of this size */ -+ } erase_block[8]; /* Max of 256, but 8 is good */ -+}; -+ -+/* Standard Boolean declarations */ -+#define TRUE 1 -+#define FALSE 0 -+ -+/* Define different type of flash */ -+#define FLASH_UNDEFINED 0 -+#define FLASH_AMD 1 -+#define FLASH_INTEL 2 -+#define FLASH_SST 3 -+ -+/* Command codes for the flash_command routine */ -+#define FLASH_RESET 0 /* reset to read mode */ -+#define FLASH_READ_ID 1 /* read device ID */ -+#define FLASH_CFIQUERY 2 /* CFI query */ -+#define FLASH_UB 3 /* go into unlock bypass mode */ -+#define FLASH_PROG 4 /* program a word */ -+#define FLASH_UBRESET 5 /* reset to read mode from unlock bypass mode */ -+#define FLASH_SERASE 6 /* sector erase */ -+ -+/* Return codes from flash_status */ -+#define STATUS_READY 0 /* ready for action */ -+#define STATUS_TIMEOUT 1 /* operation timed out */ -+ -+/* A list of AMD compatible device ID's - add others as needed */ -+#define ID_AM29DL800T 0x224A -+#define ID_AM29DL800B 0x22CB -+#define ID_AM29LV800T 0x22DA -+#define ID_AM29LV800B 0x225B -+#define ID_AM29LV400B 0x22BA -+ -+#define ID_AM29LV160B 0x2249 -+#define ID_AM29LV160T 0x22C4 -+ -+#define ID_AM29LV320T 0x22F6 -+#define ID_MX29LV320AT 0x22A7 -+#define ID_AM29LV320B 0x22F9 -+#define ID_MX29LV320AB 0x22A8 -+ -+#define ID_AM29LV320M 0x227E -+#define ID_AM29LV320MB 0x2200 -+#define ID_AM29LV320MT 0x2201 -+ -+#define ID_SST39VF1601 0x234B -+#define ID_SST39VF3201 0x235B -+ -+/* A list of Intel compatible device ID's - add others as needed */ -+#define ID_I28F160C3T 0x88C2 -+#define ID_I28F160C3B 0x88C3 -+#define ID_I28F320C3T 0x88C4 -+#define ID_I28F320C3B 0x88C5 -+ -+extern byte flash_init(void); -+extern int flash_write_buf(WORD sector, int offset, byte *buffer, int numbytes); -+extern int flash_read_buf(WORD sector, int offset, byte *buffer, int numbytes); -+extern byte flash_sector_erase_int(WORD sector); -+extern int flash_get_numsectors(void); -+extern int flash_get_sector_size(WORD sector); -+extern int flash_get_total_size(void); -+extern unsigned char *flash_get_memptr(WORD sector); -+extern int flash_get_blk(int addr); -+ -+#endif -diff -urN linux-2.6.17/arch/mips/brcm-boards/bcm963xx/irq.c linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/irq.c ---- linux-2.6.17/arch/mips/brcm-boards/bcm963xx/irq.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/irq.c 2006-08-03 16:36:58.000000000 +0200 -@@ -0,0 +1,299 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+/* -+ * Interrupt control functions for Broadcom 963xx MIPS boards -+ */ -+ -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+static DEFINE_SPINLOCK(irq_lock); -+ -+static void irq_dispatch_int(struct pt_regs *regs) -+{ -+ unsigned int pendingIrqs; -+ static unsigned int irqBit; -+ static unsigned int isrNumber = 31; -+ -+ pendingIrqs = PERF->IrqStatus & PERF->IrqMask; -+ if (!pendingIrqs) { -+ return; -+ } -+ -+ while (1) { -+ irqBit <<= 1; -+ isrNumber++; -+ if (isrNumber == 32) { -+ isrNumber = 0; -+ irqBit = 0x1; -+ } -+ if (pendingIrqs & irqBit) { -+ PERF->IrqMask &= ~irqBit; // mask -+ do_IRQ(isrNumber + INTERNAL_ISR_TABLE_OFFSET, regs); -+ break; -+ } -+ } -+} -+ -+static void irq_dispatch_ext(uint32 irq, struct pt_regs *regs) -+{ -+ if (!(PERF->ExtIrqCfg & (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)))) { -+ printk("**** Ext IRQ mask. Should not dispatch ****\n"); -+ } -+ /* disable and clear interrupt in the controller */ -+ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT)); -+ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); -+ do_IRQ(irq, regs); -+} -+ -+void brcm_irq_dispatch(struct pt_regs *regs) -+{ -+ u32 cause; -+ while((cause = (read_c0_cause()& CAUSEF_IP))) { -+ if (cause & CAUSEF_IP7) -+ do_IRQ(MIPS_TIMER_INT, regs); -+ else if (cause & CAUSEF_IP2) -+ irq_dispatch_int(regs); -+ else if (cause & CAUSEF_IP3) -+ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_0, regs); -+ else if (cause & CAUSEF_IP4) -+ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_1, regs); -+ else if (cause & CAUSEF_IP5) -+ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_2, regs); -+ else if (cause & CAUSEF_IP6) -+ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_3, regs); -+ //cli(); -+ spin_lock_irq(&irq_lock); -+ } -+} -+ -+void plat_irq_dispatch(struct pt_regs *regs) -+{ -+ u32 cause; -+ while((cause = (read_c0_cause()& CAUSEF_IP))) { -+ if (cause & CAUSEF_IP7) -+ do_IRQ(MIPS_TIMER_INT, regs); -+ else if (cause & CAUSEF_IP2) -+ irq_dispatch_int(regs); -+ else if (cause & CAUSEF_IP3) -+ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_0, regs); -+ else if (cause & CAUSEF_IP4) -+ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_1, regs); -+ else if (cause & CAUSEF_IP5) -+ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_2, regs); -+ else if (cause & CAUSEF_IP6) -+ irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_3, regs); -+ //cli(); -+ spin_lock_irq(&irq_lock); -+ } -+} -+ -+ -+void enable_brcm_irq(unsigned int irq) -+{ -+ unsigned long flags; -+ -+ local_irq_save(flags); -+ if( irq >= INTERNAL_ISR_TABLE_OFFSET ) { -+ PERF->IrqMask |= (1 << (irq - INTERNAL_ISR_TABLE_OFFSET)); -+ } -+ else if (irq >= INTERRUPT_ID_EXTERNAL_0 && irq <= INTERRUPT_ID_EXTERNAL_3) { -+ /* enable and clear interrupt in the controller */ -+ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT)); -+ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); -+ } -+ local_irq_restore(flags); -+} -+ -+void disable_brcm_irq(unsigned int irq) -+{ -+ unsigned long flags; -+ -+ local_irq_save(flags); -+ if( irq >= INTERNAL_ISR_TABLE_OFFSET ) { -+ PERF->IrqMask &= ~(1 << (irq - INTERNAL_ISR_TABLE_OFFSET)); -+ } -+ else if (irq >= INTERRUPT_ID_EXTERNAL_0 && irq <= INTERRUPT_ID_EXTERNAL_3) { -+ /* disable interrupt in the controller */ -+ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); -+ } -+ local_irq_restore(flags); -+} -+ -+void ack_brcm_irq(unsigned int irq) -+{ -+ /* Already done in brcm_irq_dispatch */ -+} -+ -+unsigned int startup_brcm_irq(unsigned int irq) -+{ -+ enable_brcm_irq(irq); -+ -+ return 0; /* never anything pending */ -+} -+ -+unsigned int startup_brcm_none(unsigned int irq) -+{ -+ return 0; -+} -+ -+void end_brcm_irq(unsigned int irq) -+{ -+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) -+ enable_brcm_irq(irq); -+} -+ -+void end_brcm_none(unsigned int irq) -+{ -+} -+ -+#define ALLINTS_NOTIMER (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4) -+ -+static void __init brcm_irq_setup(void) -+{ -+ extern asmlinkage void brcmIRQ(void); -+ -+ clear_c0_status(ST0_BEV); -+ set_except_vector(0, brcmIRQ); -+ change_c0_status(ST0_IM, ALLINTS_NOTIMER); -+ -+#ifdef CONFIG_REMOTE_DEBUG -+ rs_kgdb_hook(0); -+#endif -+} -+ -+static struct hw_interrupt_type brcm_irq_type = { -+ .typename = "MIPS", -+ .startup = startup_brcm_irq, -+ .shutdown = disable_brcm_irq, -+ .enable = enable_brcm_irq, -+ .disable = disable_brcm_irq, -+ .ack = ack_brcm_irq, -+ .end = end_brcm_irq, -+ .set_affinity = NULL -+}; -+ -+static struct hw_interrupt_type brcm_irq_no_end_type = { -+ .typename = "MIPS", -+ .startup = startup_brcm_none, -+ .shutdown = disable_brcm_irq, -+ .enable = enable_brcm_irq, -+ .disable = disable_brcm_irq, -+ .ack = ack_brcm_irq, -+ .end = end_brcm_none, -+ .set_affinity = NULL -+}; -+ -+void __init arch_init_irq(void) -+{ -+ int i; -+ -+ for (i = 0; i < NR_IRQS; i++) { -+ irq_desc[i].status = IRQ_DISABLED; -+ irq_desc[i].action = 0; -+ irq_desc[i].depth = 1; -+ irq_desc[i].handler = &brcm_irq_type; -+ } -+ -+ brcm_irq_setup(); -+} -+ -+int request_external_irq(unsigned int irq, -+ FN_HANDLER handler, -+ unsigned long irqflags, -+ const char * devname, -+ void *dev_id) -+{ -+ unsigned long flags; -+ -+ local_irq_save(flags); -+ -+ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT)); // Clear -+ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); // Mask -+ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_INSENS_SHFT)); // Edge insesnsitive -+ PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_LEVEL_SHFT)); // Level triggered -+ PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_SENSE_SHFT)); // Low level -+ -+ local_irq_restore(flags); -+ -+ return( request_irq(irq, handler, irqflags, devname, dev_id) ); -+} -+ -+/* VxWorks compatibility function(s). */ -+ -+unsigned int BcmHalMapInterrupt(FN_HANDLER pfunc, unsigned int param, -+ unsigned int interruptId) -+{ -+ int nRet = -1; -+ char *devname; -+ -+ devname = kmalloc(16, GFP_KERNEL); -+ if (devname) -+ sprintf( devname, "brcm_%d", interruptId ); -+ -+ /* Set the IRQ description to not automatically enable the interrupt at -+ * the end of an ISR. The driver that handles the interrupt must -+ * explicitly call BcmHalInterruptEnable or enable_brcm_irq. This behavior -+ * is consistent with interrupt handling on VxWorks. -+ */ -+ irq_desc[interruptId].handler = &brcm_irq_no_end_type; -+ -+ if( interruptId >= INTERNAL_ISR_TABLE_OFFSET ) -+ { -+ nRet = request_irq( interruptId, pfunc, SA_SAMPLE_RANDOM | SA_INTERRUPT, -+ devname, (void *) param ); -+ } -+ else if (interruptId >= INTERRUPT_ID_EXTERNAL_0 && interruptId <= INTERRUPT_ID_EXTERNAL_3) -+ { -+ nRet = request_external_irq( interruptId, pfunc, SA_SAMPLE_RANDOM | SA_INTERRUPT, -+ devname, (void *) param ); -+ } -+ -+ return( nRet ); -+} -+ -+ -+/* Debug function. */ -+ -+void dump_intr_regs(void) -+{ -+ printk("PERF->ExtIrqCfg [%08x]\n", *(&(PERF->ExtIrqCfg))); -+} -+ -+EXPORT_SYMBOL(enable_brcm_irq); -+EXPORT_SYMBOL(disable_brcm_irq); -+EXPORT_SYMBOL(request_external_irq); -+EXPORT_SYMBOL(BcmHalMapInterrupt); -+ -diff -urN linux-2.6.17/arch/mips/brcm-boards/bcm963xx/Kconfig linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/Kconfig ---- linux-2.6.17/arch/mips/brcm-boards/bcm963xx/Kconfig 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/Kconfig 2006-08-03 16:36:58.000000000 +0200 -@@ -0,0 +1,172 @@ -+# Kernel and Driver configuration for Broadcom Commengine ADSL board -+choice -+ prompt "Broadcom Commengine ADSL board" -+ depends on MIPS_BRCM -+ default BCM96345 -+ help -+ Select different Broadcom ADSL board -+ -+config BCM96338 -+ bool "96338 ADSL board" -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ -+config BCM96345 -+ bool "96345 ADSL board" -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ -+config BCM96348 -+ bool "96348 ADSL board" -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ -+endchoice -+ -+config BCM_BOARD -+ bool "Support for Broadcom Board" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_SERIAL -+ bool "Support for Serial Port" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_ENET -+ tristate "Support for Ethernet" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_USB -+ tristate "Support for USB" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_WLAN -+ tristate "Support for Wireless" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_PCI -+ bool "Support for PCI" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ select PCI -+ -+config BCM_ATMAPI -+ tristate "Support for ATM" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_ATMTEST -+ tristate "Support for ATM Diagnostic" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_ADSL -+ tristate "Support for ADSL" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_ENDPOINT -+ tristate "Support for VOICE" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_PROCFS -+ tristate "Support for PROCFS" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_VDSL -+ tristate "Support for VDSL" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_SECURITY -+ tristate "Support for SECURITY" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_HPNA -+ tristate "Support for HPNA" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_BOARD_IMPL -+ int "Implementation index for ADSL Board" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_SERIAL_IMPL -+ int "Implementation index for Serial" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_ENET_IMPL -+ int "Implementation index for Ethernet" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_USB_IMPL -+ int "Implementation index for USB" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_WLAN_IMPL -+ int "Implementation index for WIRELESS" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_ATMAPI_IMPL -+ int "Implementation index for ATM" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_ATMTEST_IMPL -+ int "Implementation index for ATM Diagnostic" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_BLAA_IMPL -+ int "Implementation index for BLAA" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_ADSL_IMPL -+ int "Implementation index for ADSL" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_ENDPOINT_IMPL -+ int "Implementation index for VOICE" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_PROCFS_IMPL -+ int "Implementation index for PROCFS" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_VDSL_IMPL -+ int "Implementation index for VDSL" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_SECURITY_IMPL -+ int "Implementation index for SECURITY" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+config BCM_HPNA_IMPL -+ int "Implementation index for HPNA" -+ depends on BCM96338 || BCM96345 || BCM96348 -+ -+choice -+ prompt "Root File System" -+ depends on MIPS_BRCM -+ default ROOTFS_SQUASHFS -+ help -+ Select root file system on the board flash. -+ -+config ROOTFS_SQUASHFS -+ bool "SQUASHFS" -+config ROOTFS_CRAMFS -+ bool "CRAMFS" -+config ROOTFS_JFFS2 -+ bool "JFFS2" -+config ROOTFS_NFS -+ bool "NFS" -+ -+endchoice -+ -+config ROOT_FLASHFS -+ string "flash partition" -+ depends on ROOTFS_SQUASHFS || ROOTFS_CRAMFS || ROOTFS_JFFS2 -+ default "root=31:0 ro noinitrd" if ROOTFS_SQUASHFS = y || ROOTFS_CRAMFS = y -+ default "root=31:2 ro noinitrd" if ROOTFS_JFFS2 = y -+ help -+ This is the root file system partition on flash memory -+ -+config ROOT_NFS_DIR -+ string "NFS server path" -+ depends on ROOTFS_NFS -+ default "/opt/bcm96338/targets/96338R/fs" if BCM96338 = y -+ default "/opt/bcm96345/targets/96345R/fs" if BCM96345 = y -+ default "/opt/bcm96348/targets/96348R/fs" if BCM96348 = y -+ help -+ This is the path of NFS server (host system) -diff -urN linux-2.6.17/arch/mips/brcm-boards/bcm963xx/Makefile linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/Makefile ---- linux-2.6.17/arch/mips/brcm-boards/bcm963xx/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/Makefile 2006-08-03 16:36:58.000000000 +0200 -@@ -0,0 +1,23 @@ -+# -+# Makefile for generic Broadcom MIPS boards -+# -+# Copyright (C) 2004 Broadcom Corporation -+# -+obj-y := irq.o prom.o setup.o time.o ser_init.o bcm63xx_flash.o bcm63xx_led.o board.o boardparms.o cfiflash.o -+ -+SRCBASE := $(TOPDIR) -+EXTRA_CFLAGS += -I$(SRCBASE)/include -+#EXTRA_CFLAGS += -I$(INC_ADSLDRV_PATH) -DDBG -+EXTRA_CFLAGS += -I$(INC_ADSLDRV_PATH) -+ -+ -+ifeq "$(ADSL)" "ANNEX_B" -+EXTRA_CFLAGS += -DADSL_ANNEXB -+endif -+ifeq "$(ADSL)" "SADSL" -+EXTRA_CFLAGS += -DADSL_SADSL -+endif -+ifeq "$(ADSL)" "ANNEX_C" -+EXTRA_CFLAGS += -DADSL_ANNEXC -+endif -+ -diff -urN linux-2.6.17/arch/mips/brcm-boards/bcm963xx/prom.c linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/prom.c ---- linux-2.6.17/arch/mips/brcm-boards/bcm963xx/prom.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/prom.c 2006-08-03 16:40:27.000000000 +0200 -@@ -0,0 +1,250 @@ -+/* -+<:copyright-gpl -+ Copyright 2004 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+/* -+ * prom.c: PROM library initialization code. -+ * -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include "boardparms.h" -+#include "softdsl/AdslCoreDefs.h" -+ -+ -+//char arcs_cmdline[CL_SIZE] __initdata = {0}; -+/* inv_xde */ -+int boot_loader_type; -+ -+extern int do_syslog(int, char *, int); -+extern void serial_init(void); -+extern void __init InitNvramInfo( void ); -+extern void kerSysFlashInit( void ); -+extern unsigned long get_nvram_start_addr(void); -+void __init create_root_nfs_cmdline( char *cmdline ); -+ -+#if defined(CONFIG_BCM96338) -+#define CPU_CLOCK 240000000 -+#define MACH_BCM MACH_BCM96338 -+#endif -+#if defined(CONFIG_BCM96345) -+#define CPU_CLOCK 140000000 -+#define MACH_BCM MACH_BCM96345 -+#endif -+#if defined(CONFIG_BCM96348) -+void __init calculateCpuSpeed(void); -+static unsigned long cpu_speed; -+#define CPU_CLOCK cpu_speed -+#define MACH_BCM MACH_BCM96348 -+#endif -+ -+const char *get_system_type(void) -+{ -+ /*PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr(); -+ -+ return( pNvramData->szBoardId );*/ -+ return "brcm63xx"; -+} -+ -+unsigned long getMemorySize(void) -+{ -+ unsigned long ulSdramType = BOARD_SDRAM_TYPE; -+ -+ unsigned long ulSdramSize; -+ -+ switch( ulSdramType ) -+ { -+ case BP_MEMORY_16MB_1_CHIP: -+ case BP_MEMORY_16MB_2_CHIP: -+ ulSdramSize = 16 * 1024 * 1024; -+ break; -+ case BP_MEMORY_32MB_1_CHIP: -+ case BP_MEMORY_32MB_2_CHIP: -+ ulSdramSize = 32 * 1024 * 1024; -+ break; -+ case BP_MEMORY_64MB_2_CHIP: -+ ulSdramSize = 64 * 1024 * 1024; -+ break; -+ default: -+ ulSdramSize = 8 * 1024 * 1024; -+ break; -+ } -+ if (boot_loader_type == BOOT_CFE) -+ return ulSdramSize; -+ else -+ // assume that there is one contiguous memory map -+ return boot_mem_map.map[0].size; -+} -+ -+/* -------------------------------------------------------------------------- -+ Name: prom_init -+ -------------------------------------------------------------------------- */ -+void __init prom_init(void) -+{ -+ extern ulong r4k_interval; -+ -+ serial_init(); -+ -+ /* Need to fixup boot loader detection code -+ * whithout changing prom_init prototype -+ */ -+ -+ if (boot_loader_type == BOOT_CFE) -+ kerSysFlashInit(); -+ -+ do_syslog(8, NULL, 8); -+ -+ printk( "%s prom init\n", get_system_type() ); -+ -+ PERF->IrqMask = 0; -+ -+ arcs_cmdline[0] = '\0'; -+#if defined(CONFIG_ROOT_NFS) -+ create_root_nfs_cmdline( arcs_cmdline ); -+#elif defined(CONFIG_ROOT_FLASHFS) -+ strcpy(arcs_cmdline, CONFIG_ROOT_FLASHFS); -+#endif -+//#define ADSL_SDRAM_IMAGE_SIZE 0x40000 -+ /* inv_xde */ -+ //add_memory_region(0, (getMemorySize() - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM); -+ if (boot_loader_type == BOOT_CFE) -+ add_memory_region(0, (getMemorySize() - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM); -+ else -+ add_memory_region(0, (0x01000000 - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM); -+#if defined(CONFIG_BCM96348) -+ calculateCpuSpeed(); -+#endif -+ /* Count register increments every other clock */ -+ r4k_interval = CPU_CLOCK / HZ / 2; -+ mips_hpt_frequency = CPU_CLOCK / 2; -+ -+ mips_machgroup = MACH_GROUP_BRCM; -+ mips_machtype = MACH_BCM; -+} -+ -+/* -------------------------------------------------------------------------- -+ Name: prom_free_prom_memory -+Abstract: -+ -------------------------------------------------------------------------- */ -+void __init prom_free_prom_memory(void) -+{ -+ -+} -+ -+#if 0 -+#if defined(CONFIG_ROOT_NFS) -+/* This function reads in a line that looks something like this: -+ * -+ * -+ * CFE bootline=bcmEnet(0,0)host:vmlinux e=192.169.0.100:ffffff00 h=192.169.0.1 -+ * -+ * -+ * and retuns in the cmdline parameter some that looks like this: -+ * -+ * CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/opt/targets/96345R/fs -+ * ip=192.168.0.100:192.168.0.1::255.255.255.0::eth0:off rw" -+ */ -+#define BOOT_LINE_ADDR 0x0 -+#define HEXDIGIT(d) ((d >= '0' && d <= '9') ? (d - '0') : ((d | 0x20) - 'W')) -+#define HEXBYTE(b) (HEXDIGIT((b)[0]) << 4) + HEXDIGIT((b)[1]) -+extern unsigned long get_nvram_start_addr(void); -+ -+void __init create_root_nfs_cmdline( char *cmdline ) -+{ -+ char root_nfs_cl[] = "root=/dev/nfs nfsroot=%s:" CONFIG_ROOT_NFS_DIR -+ " ip=%s:%s::%s::eth0:off rw"; -+ -+ char *localip = NULL; -+ char *hostip = NULL; -+ char mask[16] = ""; -+ PNVRAM_DATA pNvramData = (PNVRAM_DATA) get_nvram_start_addr(); -+ char bootline[128] = ""; -+ char *p = bootline; -+ -+ memcpy(bootline, pNvramData->szBootline, sizeof(bootline)); -+ while( *p ) -+ { -+ if( p[0] == 'e' && p[1] == '=' ) -+ { -+ /* Found local ip address */ -+ p += 2; -+ localip = p; -+ while( *p && *p != ' ' && *p != ':' ) -+ p++; -+ if( *p == ':' ) -+ { -+ /* Found network mask (eg FFFFFF00 */ -+ *p++ = '\0'; -+ sprintf( mask, "%u.%u.%u.%u", HEXBYTE(p), HEXBYTE(p + 2), -+ HEXBYTE(p + 4), HEXBYTE(p + 6) ); -+ p += 4; -+ } -+ else if( *p == ' ' ) -+ *p++ = '\0'; -+ } -+ else if( p[0] == 'h' && p[1] == '=' ) -+ { -+ /* Found host ip address */ -+ p += 2; -+ hostip = p; -+ while( *p && *p != ' ' ) -+ p++; -+ if( *p == ' ' ) -+ *p++ = '\0'; -+ } -+ else -+ p++; -+ } -+ -+ if( localip && hostip ) -+ sprintf( cmdline, root_nfs_cl, hostip, localip, hostip, mask ); -+} -+#endif -+#endif -+ -+#if defined(CONFIG_BCM96348) -+/* ********************************************************************* -+ * calculateCpuSpeed() -+ * Calculate the BCM6348 CPU speed by reading the PLL strap register -+ * and applying the following formula: -+ * cpu_clk = (.25 * 64MHz freq) * (N1 + 1) * (N2 + 2) / (M1_CPU + 1) -+ * Input parameters: -+ * none -+ * Return value: -+ * none -+ ********************************************************************* */ -+void __init calculateCpuSpeed(void) -+{ -+ UINT32 pllStrap = PERF->PllStrap; -+ int n1 = (pllStrap & PLL_N1_MASK) >> PLL_N1_SHFT; -+ int n2 = (pllStrap & PLL_N2_MASK) >> PLL_N2_SHFT; -+ int m1cpu = (pllStrap & PLL_M1_CPU_MASK) >> PLL_M1_CPU_SHFT; -+ -+ cpu_speed = (16 * (n1 + 1) * (n2 + 2) / (m1cpu + 1)) * 1000000; -+} -+#endif -+ -diff -urN linux-2.6.17/arch/mips/brcm-boards/bcm963xx/ser_init.c linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/ser_init.c ---- linux-2.6.17/arch/mips/brcm-boards/bcm963xx/ser_init.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/ser_init.c 2006-08-03 16:36:58.000000000 +0200 -@@ -0,0 +1,180 @@ -+/* -+<:copyright-gpl -+ Copyright 2004 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+/* -+ * Broadcom bcm63xx serial port initialization, also prepare for printk -+ * by registering with console_init -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#define SER63XX_DEFAULT_BAUD 115200 -+#define BD_BCM63XX_TIMER_CLOCK_INPUT (FPERIPH) -+#define stUart ((volatile Uart * const) UART_BASE) -+ -+// Transmit interrupts -+#define TXINT (TXFIFOEMT | TXUNDERR | TXOVFERR) -+// Receive interrupts -+#define RXINT (RXFIFONE | RXOVFERR) -+ -+/* -------------------------------------------------------------------------- -+ Name: serial_init -+ Purpose: Initalize the UART -+-------------------------------------------------------------------------- */ -+void __init serial_init(void) -+{ -+ UINT32 tmpVal = SER63XX_DEFAULT_BAUD; -+ ULONG clockFreqHz; -+ -+#if defined(CONFIG_BCM96345) -+ // Make sure clock is ticking -+ PERF->blkEnables |= UART_CLK_EN; -+#endif -+ -+ /* Dissable channel's receiver and transmitter. */ -+ stUart->control &= ~(BRGEN|TXEN|RXEN); -+ -+ /*--------------------------------------------------------------------*/ -+ /* Write the table value to the clock select register. */ -+ /* DPullen - this is the equation to use: */ -+ /* value = clockFreqHz / baud / 32-1; */ -+ /* (snmod) Actually you should also take into account any necessary */ -+ /* rounding. Divide by 16, look at lsb, if 0, divide by 2 */ -+ /* and subtract 1. If 1, just divide by 2 */ -+ /*--------------------------------------------------------------------*/ -+ clockFreqHz = BD_BCM63XX_TIMER_CLOCK_INPUT; -+ tmpVal = (clockFreqHz / tmpVal) / 16; -+ if( tmpVal & 0x01 ) -+ tmpVal /= 2; //Rounding up, so sub is already accounted for -+ else -+ tmpVal = (tmpVal / 2) - 1; // Rounding down so we must sub 1 -+ stUart->baudword = tmpVal; -+ -+ /* Finally, re-enable the transmitter and receiver. */ -+ stUart->control |= (BRGEN|TXEN|RXEN); -+ -+ stUart->config = (BITS8SYM | ONESTOP); -+ // Set the FIFO interrupt depth ... stUart->fifocfg = 0xAA; -+ stUart->fifoctl = RSTTXFIFOS | RSTRXFIFOS; -+ stUart->intMask = 0; -+ stUart->intMask = RXINT | TXINT; -+} -+ -+ -+/* prom_putc() -+ * Output a character to the UART -+ */ -+void prom_putc(char c) -+{ -+ /* Wait for Tx uffer to empty */ -+ while (! (READ16(stUart->intStatus) & TXFIFOEMT)); -+ /* Send character */ -+ stUart->Data = c; -+} -+ -+/* prom_puts() -+ * Write a string to the UART -+ */ -+void prom_puts(const char *s) -+{ -+ while (*s) { -+ if (*s == '\n') { -+ prom_putc('\r'); -+ } -+ prom_putc(*s++); -+ } -+} -+ -+ -+/* prom_getc_nowait() -+ * Returns a character from the UART -+ * Returns -1 if no characters available or corrupted -+ */ -+int prom_getc_nowait(void) -+{ -+ uint16 uStatus; -+ int cData = -1; -+ -+ uStatus = READ16(stUart->intStatus); -+ -+ if (uStatus & RXFIFONE) { /* Do we have a character? */ -+ cData = READ16(stUart->Data) & 0xff; /* Read character */ -+ if (uStatus & (RXFRAMERR | RXPARERR)) { /* If we got an error, throw it away */ -+ cData = -1; -+ } -+ } -+ -+ return cData; -+} -+ -+/* prom_getc() -+ * Returns a charcter from the serial port -+ * Will block until it receives a valid character -+*/ -+char prom_getc(void) -+{ -+ int cData = -1; -+ -+ /* Loop until we get a valid character */ -+ while(cData == -1) { -+ cData = prom_getc_nowait(); -+ } -+ return (char) cData; -+} -+ -+/* prom_testc() -+ * Returns 0 if no characters available -+ */ -+int prom_testc(void) -+{ -+ uint16 uStatus; -+ -+ uStatus = READ16(stUart->intStatus); -+ -+ return (uStatus & RXFIFONE); -+} -+ -+#if defined (CONFIG_REMOTE_DEBUG) -+/* Prevent other code from writing to the serial port */ -+void _putc(char c) { } -+void _puts(const char *ptr) { } -+#else -+/* Low level outputs call prom routines */ -+void _putc(char c) { -+ prom_putc(c); -+} -+void _puts(const char *ptr) { -+ prom_puts(ptr); -+} -+#endif -diff -urN linux-2.6.17/arch/mips/brcm-boards/bcm963xx/setup.c linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/setup.c ---- linux-2.6.17/arch/mips/brcm-boards/bcm963xx/setup.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/setup.c 2006-08-03 16:36:58.000000000 +0200 -@@ -0,0 +1,523 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+/* -+ * Generic setup routines for Broadcom 963xx MIPS boards -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+extern void brcm_timer_setup(struct irqaction *irq); -+extern unsigned long getMemorySize(void); -+ -+#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI) -+#include -+#include -+#include -+#include -+ -+static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE); -+#endif -+ -+/* This function should be in a board specific directory. For now, -+ * assume that all boards that include this file use a Broadcom chip -+ * with a soft reset bit in the PLL control register. -+ */ -+static void brcm_machine_restart(char *command) -+{ -+ const unsigned long ulSoftReset = 0x00000001; -+ unsigned long *pulPllCtrl = (unsigned long *) 0xfffe0008; -+ *pulPllCtrl |= ulSoftReset; -+} -+ -+static void brcm_machine_halt(void) -+{ -+ printk("System halted\n"); -+ while (1); -+} -+ -+#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI) -+ -+static void mpi_SetLocalPciConfigReg(uint32 reg, uint32 value) -+{ -+ /* write index then value */ -+ mpi->pcicfgcntrl = PCI_CFG_REG_WRITE_EN + reg;; -+ mpi->pcicfgdata = value; -+} -+ -+static uint32 mpi_GetLocalPciConfigReg(uint32 reg) -+{ -+ /* write index then get value */ -+ mpi->pcicfgcntrl = PCI_CFG_REG_WRITE_EN + reg;; -+ return mpi->pcicfgdata; -+} -+ -+/* -+ * mpi_ResetPcCard: Set/Reset the PcCard -+ */ -+static void mpi_ResetPcCard(int cardtype, BOOL bReset) -+{ -+ if (cardtype == MPI_CARDTYPE_NONE) { -+ return; -+ } -+ -+ if (cardtype == MPI_CARDTYPE_CARDBUS) { -+ bReset = ! bReset; -+ } -+ -+ if (bReset) { -+ mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & ~PCCARD_CARD_RESET); -+ } else { -+ mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 | PCCARD_CARD_RESET); -+ } -+} -+ -+/* -+ * mpi_ConfigCs: Configure an MPI/EBI chip select -+ */ -+static void mpi_ConfigCs(uint32 cs, uint32 base, uint32 size, uint32 flags) -+{ -+ mpi->cs[cs].base = ((base & 0x1FFFFFFF) | size); -+ mpi->cs[cs].config = flags; -+} -+ -+/* -+ * mpi_InitPcmciaSpace -+ */ -+static void mpi_InitPcmciaSpace(void) -+{ -+ // ChipSelect 4 controls PCMCIA Memory accesses -+ mpi_ConfigCs(PCMCIA_COMMON_BASE, pcmciaMem, EBI_SIZE_1M, (EBI_WORD_WIDE|EBI_ENABLE)); -+ // ChipSelect 5 controls PCMCIA Attribute accesses -+ mpi_ConfigCs(PCMCIA_ATTRIBUTE_BASE, pcmciaAttr, EBI_SIZE_1M, (EBI_WORD_WIDE|EBI_ENABLE)); -+ // ChipSelect 6 controls PCMCIA I/O accesses -+ mpi_ConfigCs(PCMCIA_IO_BASE, pcmciaIo, EBI_SIZE_64K, (EBI_WORD_WIDE|EBI_ENABLE)); -+ -+ mpi->pcmcia_cntl2 = ((PCMCIA_ATTR_ACTIVE << RW_ACTIVE_CNT_BIT) | -+ (PCMCIA_ATTR_INACTIVE << INACTIVE_CNT_BIT) | -+ (PCMCIA_ATTR_CE_SETUP << CE_SETUP_CNT_BIT) | -+ (PCMCIA_ATTR_CE_HOLD << CE_HOLD_CNT_BIT)); -+ -+ mpi->pcmcia_cntl2 |= (PCMCIA_HALFWORD_EN | PCMCIA_BYTESWAP_DIS); -+} -+ -+/* -+ * cardtype_vcc_detect: PC Card's card detect and voltage sense connection -+ * -+ * CD1#/ CD2#/ VS1#/ VS2#/ Card Initial Vcc -+ * CCD1# CCD2# CVS1 CVS2 Type -+ * -+ * GND GND open open 16-bit 5 vdc -+ * -+ * GND GND GND open 16-bit 3.3 vdc -+ * -+ * GND GND open GND 16-bit x.x vdc -+ * -+ * GND GND GND GND 16-bit 3.3 & x.x vdc -+ * -+ *==================================================================== -+ * -+ * CVS1 GND CCD1# open CardBus 3.3 vdc -+ * -+ * GND CVS2 open CCD2# CardBus x.x vdc -+ * -+ * GND CVS1 CCD2# open CardBus y.y vdc -+ * -+ * GND CVS2 GND CCD2# CardBus 3.3 & x.x vdc -+ * -+ * CVS2 GND open CCD1# CardBus x.x & y.y vdc -+ * -+ * GND CVS1 CCD2# open CardBus 3.3, x.x & y.y vdc -+ * -+ */ -+static int cardtype_vcc_detect(void) -+{ -+ uint32 data32; -+ int cardtype; -+ -+ cardtype = MPI_CARDTYPE_NONE; -+ mpi->pcmcia_cntl1 = 0x0000A000; // Turn on the output enables and drive -+ // the CVS pins to 0. -+ data32 = mpi->pcmcia_cntl1; -+ switch (data32 & 0x00000003) // Test CD1# and CD2#, see if card is plugged in. -+ { -+ case 0x00000003: // No Card is in the slot. -+ printk("mpi: No Card is in the PCMCIA slot\n"); -+ break; -+ -+ case 0x00000002: // Partial insertion, No CD2#. -+ printk("mpi: Card in the PCMCIA slot partial insertion, no CD2 signal\n"); -+ break; -+ -+ case 0x00000001: // Partial insertion, No CD1#. -+ printk("mpi: Card in the PCMCIA slot partial insertion, no CD1 signal\n"); -+ break; -+ -+ case 0x00000000: -+ mpi->pcmcia_cntl1 = 0x0000A0C0; // Turn off the CVS output enables and -+ // float the CVS pins. -+ mdelay(1); -+ data32 = mpi->pcmcia_cntl1; -+ // Read the Register. -+ switch (data32 & 0x0000000C) // See what is on the CVS pins. -+ { -+ case 0x00000000: // CVS1 and CVS2 are tied to ground, only 1 option. -+ printk("mpi: Detected 3.3 & x.x 16-bit PCMCIA card\n"); -+ cardtype = MPI_CARDTYPE_PCMCIA; -+ break; -+ -+ case 0x00000004: // CVS1 is open or tied to CCD1/CCD2 and CVS2 is tied to ground. -+ // 2 valid voltage options. -+ switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2. -+ { -+ case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins. -+ // This is not a valid combination. -+ printk("mpi: Unknown card plugged into slot\n"); -+ break; -+ -+ case 0x00000002: // CCD2 is tied to either CVS1 or CVS2. -+ mpi->pcmcia_cntl1 = 0x0000A080; // Drive CVS1 to a 0. -+ mdelay(1); -+ data32 = mpi->pcmcia_cntl1; -+ if (data32 & 0x00000002) { // CCD2 is tied to CVS2, not valid. -+ printk("mpi: Unknown card plugged into slot\n"); -+ } else { // CCD2 is tied to CVS1. -+ printk("mpi: Detected 3.3, x.x and y.y Cardbus card\n"); -+ cardtype = MPI_CARDTYPE_CARDBUS; -+ } -+ break; -+ -+ case 0x00000001: // CCD1 is tied to either CVS1 or CVS2. -+ // This is not a valid combination. -+ printk("mpi: Unknown card plugged into slot\n"); -+ break; -+ -+ case 0x00000000: // CCD1 and CCD2 are tied to ground. -+ printk("mpi: Detected x.x vdc 16-bit PCMCIA card\n"); -+ cardtype = MPI_CARDTYPE_PCMCIA; -+ break; -+ } -+ break; -+ -+ case 0x00000008: // CVS2 is open or tied to CCD1/CCD2 and CVS1 is tied to ground. -+ // 2 valid voltage options. -+ switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2. -+ { -+ case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins. -+ // This is not a valid combination. -+ printk("mpi: Unknown card plugged into slot\n"); -+ break; -+ -+ case 0x00000002: // CCD2 is tied to either CVS1 or CVS2. -+ mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0. -+ mdelay(1); -+ data32 = mpi->pcmcia_cntl1; -+ if (data32 & 0x00000002) { // CCD2 is tied to CVS1, not valid. -+ printk("mpi: Unknown card plugged into slot\n"); -+ } else {// CCD2 is tied to CVS2. -+ printk("mpi: Detected 3.3 and x.x Cardbus card\n"); -+ cardtype = MPI_CARDTYPE_CARDBUS; -+ } -+ break; -+ -+ case 0x00000001: // CCD1 is tied to either CVS1 or CVS2. -+ // This is not a valid combination. -+ printk("mpi: Unknown card plugged into slot\n"); -+ break; -+ -+ case 0x00000000: // CCD1 and CCD2 are tied to ground. -+ cardtype = MPI_CARDTYPE_PCMCIA; -+ printk("mpi: Detected 3.3 vdc 16-bit PCMCIA card\n"); -+ break; -+ } -+ break; -+ -+ case 0x0000000C: // CVS1 and CVS2 are open or tied to CCD1/CCD2. -+ // 5 valid voltage options. -+ -+ switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2. -+ { -+ case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins. -+ // This is not a valid combination. -+ printk("mpi: Unknown card plugged into slot\n"); -+ break; -+ -+ case 0x00000002: // CCD2 is tied to either CVS1 or CVS2. -+ // CCD1 is tied to ground. -+ mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0. -+ mdelay(1); -+ data32 = mpi->pcmcia_cntl1; -+ if (data32 & 0x00000002) { // CCD2 is tied to CVS1. -+ printk("mpi: Detected y.y vdc Cardbus card\n"); -+ } else { // CCD2 is tied to CVS2. -+ printk("mpi: Detected x.x vdc Cardbus card\n"); -+ } -+ cardtype = MPI_CARDTYPE_CARDBUS; -+ break; -+ -+ case 0x00000001: // CCD1 is tied to either CVS1 or CVS2. -+ // CCD2 is tied to ground. -+ -+ mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0. -+ mdelay(1); -+ data32 = mpi->pcmcia_cntl1; -+ if (data32 & 0x00000001) {// CCD1 is tied to CVS1. -+ printk("mpi: Detected 3.3 vdc Cardbus card\n"); -+ } else { // CCD1 is tied to CVS2. -+ printk("mpi: Detected x.x and y.y Cardbus card\n"); -+ } -+ cardtype = MPI_CARDTYPE_CARDBUS; -+ break; -+ -+ case 0x00000000: // CCD1 and CCD2 are tied to ground. -+ cardtype = MPI_CARDTYPE_PCMCIA; -+ printk("mpi: Detected 5 vdc 16-bit PCMCIA card\n"); -+ break; -+ } -+ break; -+ -+ default: -+ printk("mpi: Unknown card plugged into slot\n"); -+ break; -+ -+ } -+ } -+ return cardtype; -+} -+ -+/* -+ * mpi_DetectPcCard: Detect the plugged in PC-Card -+ * Return: < 0 => Unknown card detected -+ * 0 => No card detected -+ * 1 => 16-bit card detected -+ * 2 => 32-bit CardBus card detected -+ */ -+static int mpi_DetectPcCard(void) -+{ -+ int cardtype; -+ -+ cardtype = cardtype_vcc_detect(); -+ switch(cardtype) { -+ case MPI_CARDTYPE_PCMCIA: -+ mpi->pcmcia_cntl1 &= ~0x0000e000; // disable enable bits -+ //mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & ~PCCARD_CARD_RESET); -+ mpi->pcmcia_cntl1 |= (PCMCIA_ENABLE | PCMCIA_GPIO_ENABLE); -+ mpi_InitPcmciaSpace(); -+ mpi_ResetPcCard(cardtype, FALSE); -+ // Hold card in reset for 10ms -+ mdelay(10); -+ mpi_ResetPcCard(cardtype, TRUE); -+ // Let card come out of reset -+ mdelay(100); -+ break; -+ case MPI_CARDTYPE_CARDBUS: -+ // 8 => CardBus Enable -+ // 1 => PCI Slot Number -+ // C => Float VS1 & VS2 -+ mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & 0xFFFF0000) | -+ CARDBUS_ENABLE | -+ (CARDBUS_SLOT << 8)| -+ VS2_OEN | -+ VS1_OEN; -+ /* access to this memory window will be to/from CardBus */ -+ mpi->l2pmremap1 |= CARDBUS_MEM; -+ -+ // Need to reset the Cardbus Card. There's no CardManager to do this, -+ // and we need to be ready for PCI configuration. -+ mpi_ResetPcCard(cardtype, FALSE); -+ // Hold card in reset for 10ms -+ mdelay(10); -+ mpi_ResetPcCard(cardtype, TRUE); -+ // Let card come out of reset -+ mdelay(100); -+ break; -+ default: -+ break; -+ } -+ return cardtype; -+} -+ -+static int mpi_init(void) -+{ -+ unsigned long data; -+ unsigned int chipid; -+ unsigned int chiprev; -+ unsigned int sdramsize; -+ -+ chipid = (PERF->RevID & 0xFFFF0000) >> 16; -+ chiprev = (PERF->RevID & 0xFF); -+ sdramsize = getMemorySize(); -+ /* -+ * Init the pci interface -+ */ -+ data = GPIO->GPIOMode; // GPIO mode register -+ data |= GROUP2_PCI | GROUP1_MII_PCCARD; // PCI internal arbiter + Cardbus -+ GPIO->GPIOMode = data; // PCI internal arbiter -+ -+ /* -+ * In the BCM6348 CardBus support is defaulted to Slot 0 -+ * because there is no external IDSEL for CardBus. To disable -+ * the CardBus and allow a standard PCI card in Slot 0 -+ * set the cbus_idsel field to 0x1f. -+ */ -+ /* -+ uData = mpi->pcmcia_cntl1; -+ uData |= CARDBUS_IDSEL; -+ mpi->pcmcia_cntl1 = uData; -+ */ -+ // Setup PCI I/O Window range. Give 64K to PCI I/O -+ mpi->l2piorange = ~(BCM_PCI_IO_SIZE_64KB-1); -+ // UBUS to PCI I/O base address -+ mpi->l2piobase = BCM_PCI_IO_BASE & BCM_PCI_ADDR_MASK; -+ // UBUS to PCI I/O Window remap -+ mpi->l2pioremap = (BCM_PCI_IO_BASE | MEM_WINDOW_EN); -+ -+ // enable PCI related GPIO pins and data swap between system and PCI bus -+ mpi->locbuscntrl = (EN_PCI_GPIO | DIR_U2P_NOSWAP); -+ -+ /* Enable 6348 BusMaster and Memory access mode */ -+ data = mpi_GetLocalPciConfigReg(PCI_COMMAND); -+ data |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); -+ mpi_SetLocalPciConfigReg(PCI_COMMAND, data); -+ -+ /* Configure two 16 MByte PCI to System memory regions. */ -+ /* These memory regions are used when PCI device is a bus master */ -+ /* Accesses to the SDRAM from PCI bus will be "byte swapped" for this region */ -+ mpi_SetLocalPciConfigReg(PCI_BASE_ADDRESS_3, BCM_HOST_MEM_SPACE1); -+ mpi->sp0remap = 0x0; -+ -+ /* Accesses to the SDRAM from PCI bus will not be "byte swapped" for this region */ -+ mpi_SetLocalPciConfigReg(PCI_BASE_ADDRESS_4, BCM_HOST_MEM_SPACE2); -+ mpi->sp1remap = 0x0; -+ mpi->pcimodesel |= (PCI_BAR2_NOSWAP | 0x40); -+ -+ if ((chipid == 0x6348) && (chiprev == 0xb0)) { -+ mpi->sp0range = ~(sdramsize-1); -+ mpi->sp1range = ~(sdramsize-1); -+ } -+ /* -+ * Change 6348 PCI Cfg Reg. offset 0x40 to PCI memory read retry count infinity -+ * by set 0 in bit 8~15. This resolve read Bcm4306 srom return 0xffff in -+ * first read. -+ */ -+ data = mpi_GetLocalPciConfigReg(BRCM_PCI_CONFIG_TIMER); -+ data &= ~BRCM_PCI_CONFIG_TIMER_RETRY_MASK; -+ data |= 0x00000080; -+ mpi_SetLocalPciConfigReg(BRCM_PCI_CONFIG_TIMER, data); -+ -+ /* enable pci interrupt */ -+ mpi->locintstat |= (EXT_PCI_INT << 16); -+ -+ mpi_DetectPcCard(); -+ -+ ioport_resource.start = BCM_PCI_IO_BASE; -+ ioport_resource.end = BCM_PCI_IO_BASE + BCM_PCI_IO_SIZE_64KB; -+ -+#if defined(CONFIG_USB) -+ PERF->blkEnables |= USBH_CLK_EN; -+ mdelay(100); -+ *USBH_NON_OHCI = NON_OHCI_BYTE_SWAP; -+#endif -+ -+ return 0; -+} -+#endif -+ -+static int __init brcm63xx_setup(void) -+{ -+ extern int panic_timeout; -+ -+ _machine_restart = brcm_machine_restart; -+ _machine_halt = brcm_machine_halt; -+ pm_power_off = brcm_machine_halt; -+ -+ board_timer_setup = brcm_timer_setup; -+ -+ panic_timeout = 5; -+ -+#if defined(CONFIG_BCM96348) && defined(CONFIG_PCI) -+ /* mpi initialization */ -+ mpi_init(); -+#endif -+ return 0; -+} -+ -+void plat_setup(void) -+{ -+ brcm63xx_setup(); -+} -+ -+/*************************************************************************** -+ * C++ New and delete operator functions -+ ***************************************************************************/ -+ -+/* void *operator new(unsigned int sz) */ -+void *_Znwj(unsigned int sz) -+{ -+ return( kmalloc(sz, GFP_KERNEL) ); -+} -+ -+/* void *operator new[](unsigned int sz)*/ -+void *_Znaj(unsigned int sz) -+{ -+ return( kmalloc(sz, GFP_KERNEL) ); -+} -+ -+/* placement new operator */ -+/* void *operator new (unsigned int size, void *ptr) */ -+void *ZnwjPv(unsigned int size, void *ptr) -+{ -+ return ptr; -+} -+ -+/* void operator delete(void *m) */ -+void _ZdlPv(void *m) -+{ -+ kfree(m); -+} -+ -+/* void operator delete[](void *m) */ -+void _ZdaPv(void *m) -+{ -+ kfree(m); -+} -+ -+EXPORT_SYMBOL(_Znwj); -+EXPORT_SYMBOL(_Znaj); -+EXPORT_SYMBOL(ZnwjPv); -+EXPORT_SYMBOL(_ZdlPv); -+EXPORT_SYMBOL(_ZdaPv); -+ -diff -urN linux-2.6.17/arch/mips/brcm-boards/bcm963xx/softdsl/AdslCoreDefs.h linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/softdsl/AdslCoreDefs.h ---- linux-2.6.17/arch/mips/brcm-boards/bcm963xx/softdsl/AdslCoreDefs.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/softdsl/AdslCoreDefs.h 2006-08-03 16:36:58.000000000 +0200 -@@ -0,0 +1,2 @@ -+#define ADSL_SDRAM_IMAGE_SIZE (384*1024) -+ -diff -urN linux-2.6.17/arch/mips/brcm-boards/bcm963xx/time.c linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/time.c ---- linux-2.6.17/arch/mips/brcm-boards/bcm963xx/time.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/bcm963xx/time.c 2006-08-03 16:36:58.000000000 +0200 -@@ -0,0 +1,277 @@ -+/* -+<:copyright-gpl -+ Copyright 2004 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+/* -+ * Setup time for Broadcom 963xx MIPS boards -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+unsigned long r4k_interval; /* Amount to increment compare reg each time */ -+static unsigned long r4k_cur; /* What counter should be at next timer irq */ -+ -+/* Cycle counter value at the previous timer interrupt.. */ -+static unsigned int timerhi = 0, timerlo = 0; -+ -+extern volatile unsigned long wall_jiffies; -+ -+/* Optional board-specific timer routine */ -+void (*board_timer_interrupt)(int irq, void *dev_id, struct pt_regs * regs); -+ -+static inline void ack_r4ktimer(unsigned long newval) -+{ -+ write_c0_compare(newval); -+} -+ -+/* -+ * There are a lot of conceptually broken versions of the MIPS timer interrupt -+ * handler floating around. This one is rather different, but the algorithm -+ * is provably more robust. -+ */ -+static irqreturn_t brcm_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) -+{ -+ unsigned int count; -+ -+ if (r4k_interval == 0) -+ goto null; -+ -+ do { -+ do_timer(regs); -+ -+ if (board_timer_interrupt) -+ board_timer_interrupt(irq, dev_id, regs); -+ -+ r4k_cur += r4k_interval; -+ ack_r4ktimer(r4k_cur); -+ -+ } while (((count = (unsigned long)read_c0_count()) -+ - r4k_cur) < 0x7fffffff); -+ -+ if (!jiffies) { -+ /* -+ * If jiffies has overflowed in this timer_interrupt we must -+ * update the timer[hi]/[lo] to make do_fast_gettimeoffset() -+ * quotient calc still valid. -arca -+ */ -+ timerhi = timerlo = 0; -+ } else { -+ /* -+ * The cycle counter is only 32 bit which is good for about -+ * a minute at current count rates of upto 150MHz or so. -+ */ -+ timerhi += (count < timerlo); /* Wrap around */ -+ timerlo = count; -+ } -+ -+ return IRQ_HANDLED; -+ -+null: -+ ack_r4ktimer(0); -+ return IRQ_NONE; -+} -+ -+static struct irqaction brcm_timer_action = { -+ .handler = brcm_timer_interrupt, -+ .flags = SA_INTERRUPT, -+ .mask = CPU_MASK_NONE, -+ .name = "timer", -+ .next = NULL, -+ .dev_id = brcm_timer_interrupt, -+}; -+ -+ -+void __init brcm_timer_setup(struct irqaction *irq) -+{ -+ r4k_cur = (read_c0_count() + r4k_interval); -+ write_c0_compare(r4k_cur); -+ -+ /* we are using the cpu counter for timer interrupts */ -+ irq->handler = no_action; /* we use our own handler */ -+ setup_irq(MIPS_TIMER_INT, &brcm_timer_action); -+ set_c0_status(IE_IRQ5); -+} -+ -+#if 0 -+/* This is for machines which generate the exact clock. */ -+#define USECS_PER_JIFFY (1000000/HZ) -+#define USECS_PER_JIFFY_FRAC (0x100000000*1000000/HZ&0xffffffff) -+ -+static void call_do_div64_32( unsigned long *res, unsigned int high, -+ unsigned int low, unsigned long base ) -+{ -+ do_div64_32(*res, high, low, base); -+} -+ -+/* -+ * FIXME: Does playing with the RP bit in c0_status interfere with this code? -+ */ -+static unsigned long do_fast_gettimeoffset(void) -+{ -+ u32 count; -+ unsigned long res, tmp; -+ -+ /* Last jiffy when do_fast_gettimeoffset() was called. */ -+ static unsigned long last_jiffies=0; -+ unsigned long quotient; -+ -+ /* -+ * Cached "1/(clocks per usec)*2^32" value. -+ * It has to be recalculated once each jiffy. -+ */ -+ static unsigned long cached_quotient=0; -+ -+ tmp = jiffies; -+ -+ quotient = cached_quotient; -+ -+ if (tmp && last_jiffies != tmp) { -+ last_jiffies = tmp; -+#ifdef CONFIG_CPU_MIPS32 -+ if (last_jiffies != 0) { -+ -+ unsigned long r0; -+ /* gcc 3.0.1 gets an internal compiler error if there are two -+ * do_div64_32 inline macros. To work around this problem, -+ * do_div64_32 is called as a function. -+ */ -+ call_do_div64_32(&r0, timerhi, timerlo, tmp); -+ call_do_div64_32("ient, USECS_PER_JIFFY, -+ USECS_PER_JIFFY_FRAC, r0); -+ -+ cached_quotient = quotient; -+ -+ } -+#else -+ __asm__(".set\tnoreorder\n\t" -+ ".set\tnoat\n\t" -+ ".set\tmips3\n\t" -+ "lwu\t%0,%2\n\t" -+ "dsll32\t$1,%1,0\n\t" -+ "or\t$1,$1,%0\n\t" -+ "ddivu\t$0,$1,%3\n\t" -+ "mflo\t$1\n\t" -+ "dsll32\t%0,%4,0\n\t" -+ "nop\n\t" -+ "ddivu\t$0,%0,$1\n\t" -+ "mflo\t%0\n\t" -+ ".set\tmips0\n\t" -+ ".set\tat\n\t" -+ ".set\treorder" -+ :"=&r" (quotient) -+ :"r" (timerhi), -+ "m" (timerlo), -+ "r" (tmp), -+ "r" (USECS_PER_JIFFY) -+ :"$1"); -+ cached_quotient = quotient; -+#endif -+ } -+ -+ /* Get last timer tick in absolute kernel time */ -+ count = read_c0_count(); -+ -+ /* .. relative to previous jiffy (32 bits is enough) */ -+ count -= timerlo; -+ -+ __asm__("multu\t%1,%2\n\t" -+ "mfhi\t%0" -+ :"=r" (res) -+ :"r" (count), -+ "r" (quotient)); -+ -+ /* -+ * Due to possible jiffies inconsistencies, we need to check -+ * the result so that we'll get a timer that is monotonic. -+ */ -+ if (res >= USECS_PER_JIFFY) -+ res = USECS_PER_JIFFY-1; -+ -+ return res; -+} -+ -+void do_gettimeofday(struct timeval *tv) -+{ -+ unsigned int flags; -+ -+ read_lock_irqsave (&xtime_lock, flags); -+ tv->tv_sec = xtime.tv_sec; -+ tv->tv_usec = xtime.tv_nsec/1000; -+ tv->tv_usec += do_fast_gettimeoffset(); -+ -+ /* -+ * xtime is atomically updated in timer_bh. jiffies - wall_jiffies -+ * is nonzero if the timer bottom half hasnt executed yet. -+ */ -+ if (jiffies - wall_jiffies) -+ tv->tv_usec += USECS_PER_JIFFY; -+ -+ read_unlock_irqrestore (&xtime_lock, flags); -+ -+ if (tv->tv_usec >= 1000000) { -+ tv->tv_usec -= 1000000; -+ tv->tv_sec++; -+ } -+} -+ -+EXPORT_SYMBOL(do_gettimeofday); -+ -+int do_settimeofday(struct timespec *tv) -+{ -+ write_lock_irq (&xtime_lock); -+ -+ /* This is revolting. We need to set the xtime.tv_usec correctly. -+ * However, the value in this location is is value at the last tick. -+ * Discover what correction gettimeofday would have done, and then -+ * undo it! -+ */ -+ tv->tv_nsec -= do_fast_gettimeoffset()*NSEC_PER_USEC; -+ -+ if (tv->tv_nsec < 0) { -+ tv->tv_nsec += 1000000*NSEC_PER_USEC; -+ tv->tv_sec--; -+ } -+ -+ xtime.tv_sec = tv->tv_sec; -+ xtime.tv_nsec = tv->tv_nsec; -+ time_adjust = 0; /* stop active adjtime() */ -+ time_status |= STA_UNSYNC; -+ time_maxerror = NTP_PHASE_LIMIT; -+ time_esterror = NTP_PHASE_LIMIT; -+ -+ write_unlock_irq (&xtime_lock); -+} -+ -+EXPORT_SYMBOL(do_settimeofday); -+ -+#endif -diff -urN linux-2.6.17/arch/mips/brcm-boards/generic/dbg_io.c linux-2.6.17-brcm63xx/arch/mips/brcm-boards/generic/dbg_io.c ---- linux-2.6.17/arch/mips/brcm-boards/generic/dbg_io.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/generic/dbg_io.c 2006-08-03 16:36:58.000000000 +0200 -@@ -0,0 +1,260 @@ -+/* -+<:copyright-gpl -+ Copyright 2003 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#undef PRNT /* define for debug printing */ -+ -+#define UART16550_BAUD_2400 2400 -+#define UART16550_BAUD_4800 4800 -+#define UART16550_BAUD_9600 9600 -+#define UART16550_BAUD_19200 19200 -+#define UART16550_BAUD_38400 38400 -+#define UART16550_BAUD_57600 57600 -+#define UART16550_BAUD_115200 115200 -+ -+#define UART16550_PARITY_NONE 0 -+#define UART16550_PARITY_ODD 0x08 -+#define UART16550_PARITY_EVEN 0x18 -+#define UART16550_PARITY_MARK 0x28 -+#define UART16550_PARITY_SPACE 0x38 -+ -+#define UART16550_DATA_5BIT 0x0 -+#define UART16550_DATA_6BIT 0x1 -+#define UART16550_DATA_7BIT 0x2 -+#define UART16550_DATA_8BIT 0x3 -+ -+#define UART16550_STOP_1BIT 0x0 -+#define UART16550_STOP_2BIT 0x4 -+ -+volatile Uart * stUart = UART_BASE; -+ -+#define WRITE16(addr, value) ((*(volatile UINT16 *)((ULONG)&addr)) = value) -+ -+/* Low level UART routines from promcon.c */ -+extern void prom_putc(char c); -+extern char prom_getc(void); -+extern int prom_getc_nowait(void); -+extern int prom_testc(void); -+ -+extern void set_debug_traps(void); -+extern void breakpoint(void); -+extern void enable_brcm_irq(unsigned int); -+extern void set_async_breakpoint(unsigned int epc); -+ -+#ifdef CONFIG_GDB_CONSOLE -+extern void register_gdb_console(void); -+#endif -+ -+int gdb_initialized = 0; -+ -+#define GDB_BUF_SIZE 512 /* power of 2, please */ -+ -+static char gdb_buf[GDB_BUF_SIZE] ; -+static int gdb_buf_in_inx ; -+static atomic_t gdb_buf_in_cnt ; -+static int gdb_buf_out_inx ; -+ -+void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop) -+{ -+ /* Do nothing, assume boot loader has already set up serial port */ -+ printk("debugInit called\n"); -+} -+ -+/* -+ * Get a char if available, return -1 if nothing available. -+ * Empty the receive buffer first, then look at the interface hardware. -+ */ -+static int read_char(void) -+{ -+ if (atomic_read(&gdb_buf_in_cnt) != 0) /* intr routine has q'd chars */ -+ { -+ int chr ; -+ -+ chr = gdb_buf[gdb_buf_out_inx++] ; -+ gdb_buf_out_inx &= (GDB_BUF_SIZE - 1) ; -+ atomic_dec(&gdb_buf_in_cnt) ; -+ return(chr) ; -+ } -+ return(prom_getc_nowait()) ; /* read from hardware */ -+} /* read_char */ -+ -+/* -+ * This is the receiver interrupt routine for the GDB stub. -+ * It will receive a limited number of characters of input -+ * from the gdb host machine and save them up in a buffer. -+ * -+ * When the gdb stub routine getDebugChar() is called it -+ * draws characters out of the buffer until it is empty and -+ * then reads directly from the serial port. -+ * -+ * We do not attempt to write chars from the interrupt routine -+ * since the stubs do all of that via putDebugChar() which -+ * writes one byte after waiting for the interface to become -+ * ready. -+ * -+ * The debug stubs like to run with interrupts disabled since, -+ * after all, they run as a consequence of a breakpoint in -+ * the kernel. -+ * -+ * Perhaps someone who knows more about the tty driver than I -+ * care to learn can make this work for any low level serial -+ * driver. -+ */ -+static void gdb_interrupt(int irq, void *dev_id, struct pt_regs * regs) -+{ -+ int chr ; -+ int more; -+ do -+ { -+ chr = prom_getc_nowait() ; -+ more = prom_testc(); -+ if (chr < 0) continue ; -+ -+ /* If we receive a Ctrl-C then this is GDB trying to break in */ -+ if (chr == 3) -+ { -+ /* Replace current instruction with breakpoint */ -+ set_async_breakpoint(regs->cp0_epc); -+ //breakpoint(); -+ } -+ -+#ifdef PRNT -+ printk("gdb_interrupt: chr=%02x '%c', more = %x\n", -+ chr, chr > ' ' && chr < 0x7F ? chr : ' ', more) ; -+#endif -+ -+ if (atomic_read(&gdb_buf_in_cnt) >= GDB_BUF_SIZE) -+ { /* buffer overflow, clear it */ -+ gdb_buf_in_inx = 0 ; -+ atomic_set(&gdb_buf_in_cnt, 0) ; -+ gdb_buf_out_inx = 0 ; -+ break ; -+ } -+ -+ gdb_buf[gdb_buf_in_inx++] = chr ; -+ gdb_buf_in_inx &= (GDB_BUF_SIZE - 1) ; -+ atomic_inc(&gdb_buf_in_cnt) ; -+ } -+ while (more !=0); -+ -+} /* gdb_interrupt */ -+ -+/* -+ * getDebugChar -+ * -+ * This is a GDB stub routine. It waits for a character from the -+ * serial interface and then returns it. If there is no serial -+ * interface connection then it returns a bogus value which will -+ * almost certainly cause the system to hang. -+ */ -+int getDebugChar(void) -+{ -+ volatile int chr ; -+ -+#ifdef PRNT -+ printk("getDebugChar: ") ; -+#endif -+ -+ while ( (chr = read_char()) < 0 ) ; -+ -+#ifdef PRNT -+ printk("%c\n", chr > ' ' && chr < 0x7F ? chr : ' ') ; -+#endif -+ return(chr) ; -+ -+} /* getDebugChar */ -+ -+/* -+ * putDebugChar -+ * -+ * This is a GDB stub routine. It waits until the interface is ready -+ * to transmit a char and then sends it. If there is no serial -+ * interface connection then it simply returns to its caller, having -+ * pretended to send the char. -+ */ -+int putDebugChar(unsigned char chr) -+{ -+#ifdef PRNT -+ printk("putDebugChar: chr=%02x '%c'\n", chr, -+ chr > ' ' && chr < 0x7F ? chr : ' ') ; -+#endif -+ -+ prom_putc(chr) ; /* this routine will wait */ -+ return 1; -+ -+} /* putDebugChar */ -+ -+/* Just a NULL routine for testing. */ -+void gdb_null(void) -+{ -+} -+ -+void rs_kgdb_hook(int tty_no) -+{ -+ printk("rs_kgdb_hook: tty %d\n", tty_no); -+ -+ /* Call GDB routine to setup the exception vectors for the debugger */ -+ set_debug_traps(); -+ -+ printk("Breaking into debugger...\n"); -+ breakpoint(); -+ gdb_null() ; -+ printk("Connected.\n"); -+ -+ gdb_initialized = 1; -+ -+#ifdef CONFIG_GDB_CONSOLE -+ register_gdb_console(); -+#endif -+} -+ -+void kgdb_hook_irq() -+{ -+ int retval ; -+ uint16 uMask; -+ -+ printk("GDB: Hooking UART interrupt\n"); -+ -+ retval = request_irq(INTERRUPT_ID_UART, -+ gdb_interrupt, -+ SA_INTERRUPT, -+ "GDB-stub", NULL); -+ -+ if (retval != 0) -+ printk("gdb_hook: request_irq(irq=%d) failed: %d\n", INTERRUPT_ID_UART, retval); -+ -+ // Enable UART config Rx not empty IRQ -+ uMask = READ16(stUart->intMask) ; -+ // printk("intMask: 0x%x\n", uMask); -+ WRITE16(stUart->intMask, uMask | RXFIFONE); -+} -+ -+ -diff -urN linux-2.6.17/arch/mips/brcm-boards/generic/int-handler.S linux-2.6.17-brcm63xx/arch/mips/brcm-boards/generic/int-handler.S ---- linux-2.6.17/arch/mips/brcm-boards/generic/int-handler.S 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/generic/int-handler.S 2006-08-03 16:36:58.000000000 +0200 -@@ -0,0 +1,59 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+/* -+ * Generic interrupt handler for Broadcom MIPS boards -+ */ -+ -+#include -+ -+#include -+#include -+#include -+#include -+ -+/* -+ * MIPS IRQ Source -+ * -------- ------ -+ * 0 Software (ignored) -+ * 1 Software (ignored) -+ * 2 Combined hardware interrupt (hw0) -+ * 3 Hardware -+ * 4 Hardware -+ * 5 Hardware -+ * 6 Hardware -+ * 7 R4k timer -+ */ -+ -+ .text -+ .set noreorder -+ .set noat -+ .align 5 -+ NESTED(brcmIRQ, PT_SIZE, sp) -+ SAVE_ALL -+ CLI -+ .set noreorder -+ .set at -+ -+ jal brcm_irq_dispatch -+ move a0, sp -+ -+ j ret_from_irq -+ nop -+ -+ END(brcmIRQ) -diff -urN linux-2.6.17/arch/mips/brcm-boards/generic/Makefile linux-2.6.17-brcm63xx/arch/mips/brcm-boards/generic/Makefile ---- linux-2.6.17/arch/mips/brcm-boards/generic/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.17-brcm63xx/arch/mips/brcm-boards/generic/Makefile 2006-08-03 16:36:58.000000000 +0200 -@@ -0,0 +1,11 @@ -+# -+# Makefile for generic Broadcom MIPS boards -+# -+# Copyright (C) 2001 Broadcom Corporation -+# -+obj-y := int-handler.o -+ -+ifdef CONFIG_REMOTE_DEBUG -+obj-y += dbg_io.o -+endif -+ diff --git a/openwrt/target/linux/brcm63xx-2.6/patches/002-pci_bcm96348.patch b/openwrt/target/linux/brcm63xx-2.6/patches/002-pci_bcm96348.patch deleted file mode 100644 index 7d0936cb83..0000000000 --- a/openwrt/target/linux/brcm63xx-2.6/patches/002-pci_bcm96348.patch +++ /dev/null @@ -1,438 +0,0 @@ -diff -Naurp linux-2.6.16.7-generic-patched/arch/mips/pci/Makefile linux-2.6.16.7-patched/arch/mips/pci/Makefile ---- linux-2.6.16.7-generic-patched/arch/mips/pci/Makefile 2006-04-17 23:53:25.000000000 +0200 -+++ linux-2.6.16.7-patched/arch/mips/pci/Makefile 2006-07-05 15:21:58.000000000 +0200 -@@ -18,6 +18,7 @@ obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o - obj-$(CONFIG_MIPS_TX3927) += ops-tx3927.o - obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o - obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o -+obj-$(CONFIG_BCM_PCI) += fixup-bcm96348.o pci-bcm96348.o ops-bcm96348.o - - # - # These are still pretty much in the old state, watch, go blind. -diff -Naurp linux-2.6.16.7-generic-patched/arch/mips/pci/fixup-bcm96348.c linux-2.6.16.7-patched/arch/mips/pci/fixup-bcm96348.c ---- linux-2.6.16.7-generic-patched/arch/mips/pci/fixup-bcm96348.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.16.7-patched/arch/mips/pci/fixup-bcm96348.c 2006-07-05 15:21:58.000000000 +0200 -@@ -0,0 +1,85 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE); -+ -+static char irq_tab_bcm96348[] __initdata = { -+ [0] = INTERRUPT_ID_MPI, -+ [1] = INTERRUPT_ID_MPI, -+#if defined(CONFIG_USB) -+ [USB_HOST_SLOT] = INTERRUPT_ID_USBH -+#endif -+}; -+ -+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -+{ -+ return irq_tab_bcm96348[slot]; -+} -+ -+static void bcm96348_fixup(struct pci_dev *dev) -+{ -+ uint32 memaddr; -+ uint32 size; -+ -+ memaddr = pci_resource_start(dev, 0); -+ size = pci_resource_len(dev, 0); -+ -+ switch (PCI_SLOT(dev->devfn)) { -+ case 0: -+ // UBUS to PCI address range -+ // Memory Window 1. Mask determines which bits are decoded. -+ mpi->l2pmrange1 = ~(size-1); -+ // UBUS to PCI Memory base address. This is akin to the ChipSelect base -+ // register. -+ mpi->l2pmbase1 = memaddr & BCM_PCI_ADDR_MASK; -+ // UBUS to PCI Remap Address. Replaces the masked address bits in the -+ // range register with this setting. -+ // Also, enable direct I/O and direct Memory accesses -+ mpi->l2pmremap1 = (memaddr | MEM_WINDOW_EN); -+ break; -+ -+ case 1: -+ // Memory Window 2 -+ mpi->l2pmrange2 = ~(size-1); -+ // UBUS to PCI Memory base address. -+ mpi->l2pmbase2 = memaddr & BCM_PCI_ADDR_MASK; -+ // UBUS to PCI Remap Address -+ mpi->l2pmremap2 = (memaddr | MEM_WINDOW_EN); -+ break; -+ -+#if defined(CONFIG_USB) -+ case USB_HOST_SLOT: -+ dev->resource[0].start = USB_HOST_BASE; -+ dev->resource[0].end = USB_HOST_BASE+USB_BAR0_MEM_SIZE-1; -+ break; -+#endif -+ } -+} -+ -+struct pci_fixup pcibios_fixups[] = { -+ { PCI_FIXUP_FINAL, PCI_ANY_ID, PCI_ANY_ID, bcm96348_fixup }, -+ {0} -+}; -diff -Naurp linux-2.6.16.7-generic-patched/arch/mips/pci/ops-bcm96348.c linux-2.6.16.7-patched/arch/mips/pci/ops-bcm96348.c ---- linux-2.6.16.7-generic-patched/arch/mips/pci/ops-bcm96348.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.16.7-patched/arch/mips/pci/ops-bcm96348.c 2006-07-05 15:21:58.000000000 +0200 -@@ -0,0 +1,276 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+ -+#include -+ -+#if defined(CONFIG_USB) -+#if 0 -+#define DPRINT(x...) printk(x) -+#else -+#define DPRINT(x...) -+#endif -+ -+static int -+pci63xx_int_read(unsigned int devfn, int where, u32 * value, int size); -+static int -+pci63xx_int_write(unsigned int devfn, int where, u32 * value, int size); -+ -+static bool usb_mem_size_rd = FALSE; -+static uint32 usb_mem_base = 0; -+static uint32 usb_cfg_space_cmd_reg = 0; -+#endif -+static bool pci_mem_size_rd = FALSE; -+ -+static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE); -+ -+static void mpi_SetupPciConfigAccess(uint32 addr) -+{ -+ mpi->l2pcfgctl = (DIR_CFG_SEL | DIR_CFG_USEREG | addr) & ~CONFIG_TYPE; -+} -+ -+static void mpi_ClearPciConfigAccess(void) -+{ -+ mpi->l2pcfgctl = 0x00000000; -+} -+ -+#if defined(CONFIG_USB) -+/* -------------------------------------------------------------------------- -+ Name: pci63xx_int_write -+Abstract: PCI Config write on internal device(s) -+ -------------------------------------------------------------------------- */ -+static int -+pci63xx_int_write(unsigned int devfn, int where, u32 * value, int size) -+{ -+ if (PCI_SLOT(devfn) != USB_HOST_SLOT) { -+ return PCIBIOS_SUCCESSFUL; -+ } -+ -+ switch (size) { -+ case 1: -+ DPRINT("W => Slot: %d Where: %2X Len: %d Data: %02X\n", -+ PCI_SLOT(devfn), where, size, *value); -+ break; -+ case 2: -+ DPRINT("W => Slot: %d Where: %2X Len: %d Data: %04X\n", -+ PCI_SLOT(devfn), where, size, *value); -+ switch (where) { -+ case PCI_COMMAND: -+ usb_cfg_space_cmd_reg = *value; -+ break; -+ default: -+ break; -+ } -+ break; -+ case 4: -+ DPRINT("W => Slot: %d Where: %2X Len: %d Data: %08lX\n", -+ PCI_SLOT(devfn), where, size, *value); -+ switch (where) { -+ case PCI_BASE_ADDRESS_0: -+ if (*value == 0xffffffff) { -+ usb_mem_size_rd = TRUE; -+ } else { -+ usb_mem_base = *value; -+ } -+ break; -+ default: -+ break; -+ } -+ break; -+ default: -+ break; -+ } -+ -+ return PCIBIOS_SUCCESSFUL; -+} -+ -+/* -------------------------------------------------------------------------- -+ Name: pci63xx_int_read -+Abstract: PCI Config read on internal device(s) -+ -------------------------------------------------------------------------- */ -+static int -+pci63xx_int_read(unsigned int devfn, int where, u32 * value, int size) -+{ -+ uint32 retValue = 0xFFFFFFFF; -+ -+ if (PCI_SLOT(devfn) != USB_HOST_SLOT) { -+ return PCIBIOS_SUCCESSFUL; -+ } -+ -+ // For now, this is specific to the USB Host controller. We can -+ // make it more general if we have to... -+ // Emulate PCI Config accesses -+ switch (where) { -+ case PCI_VENDOR_ID: -+ case PCI_DEVICE_ID: -+ retValue = PCI_VENDOR_ID_BROADCOM | 0x63000000; -+ break; -+ case PCI_COMMAND: -+ case PCI_STATUS: -+ retValue = (0x0006 << 16) | usb_cfg_space_cmd_reg; -+ break; -+ case PCI_CLASS_REVISION: -+ case PCI_CLASS_DEVICE: -+ retValue = (PCI_CLASS_SERIAL_USB << 16) | (0x10 << 8) | 0x01; -+ break; -+ case PCI_BASE_ADDRESS_0: -+ if (usb_mem_size_rd) { -+ retValue = USB_BAR0_MEM_SIZE; -+ } else { -+ if (usb_mem_base != 0) -+ retValue = usb_mem_base; -+ else -+ retValue = USB_HOST_BASE; -+ } -+ usb_mem_size_rd = FALSE; -+ break; -+ case PCI_CACHE_LINE_SIZE: -+ case PCI_LATENCY_TIMER: -+ retValue = 0; -+ break; -+ case PCI_HEADER_TYPE: -+ retValue = PCI_HEADER_TYPE_NORMAL; -+ break; -+ case PCI_SUBSYSTEM_VENDOR_ID: -+ retValue = PCI_VENDOR_ID_BROADCOM; -+ break; -+ case PCI_SUBSYSTEM_ID: -+ retValue = 0x6300; -+ break; -+ case PCI_INTERRUPT_LINE: -+ retValue = INTERRUPT_ID_USBH; -+ break; -+ default: -+ break; -+ } -+ -+ switch (size) { -+ case 1: -+ *value = (retValue >> ((where & 3) << 3)) & 0xff; -+ DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %02X\n", -+ PCI_SLOT(devfn), where, size, *value); -+ break; -+ case 2: -+ *value = (retValue >> ((where & 3) << 3)) & 0xffff; -+ DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %04X\n", -+ PCI_SLOT(devfn), where, size, *value); -+ break; -+ case 4: -+ *value = retValue; -+ DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %08lX\n", -+ PCI_SLOT(devfn), where, size, *value); -+ break; -+ default: -+ break; -+ } -+ -+ return PCIBIOS_SUCCESSFUL; -+} -+#endif -+ -+static int bcm96348_pcibios_read(struct pci_bus *bus, unsigned int devfn, -+ int where, int size, u32 * val) -+{ -+ volatile unsigned char *ioBase = (unsigned char *)(mpi->l2piobase | KSEG1); -+ uint32 data; -+ -+#if defined(CONFIG_USB) -+ if (PCI_SLOT(devfn) == USB_HOST_SLOT) -+ return pci63xx_int_read(devfn, where, val, size); -+#endif -+ -+ mpi_SetupPciConfigAccess(BCM_PCI_CFG(PCI_SLOT(devfn), PCI_FUNC(devfn), where)); -+ data = *(uint32 *)ioBase; -+ switch(size) { -+ case 1: -+ *val = (data >> ((where & 3) << 3)) & 0xff; -+ break; -+ case 2: -+ *val = (data >> ((where & 3) << 3)) & 0xffff; -+ break; -+ case 4: -+ *val = data; -+ /* Special case for reading PCI device range */ -+ if ((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_5)) { -+ if (pci_mem_size_rd) { -+ /* bcm6348 PCI memory window minimum size is 64K */ -+ *val &= PCI_SIZE_64K; -+ } -+ } -+ break; -+ default: -+ break; -+ } -+ pci_mem_size_rd = FALSE; -+ mpi_ClearPciConfigAccess(); -+ -+ return PCIBIOS_SUCCESSFUL; -+} -+ -+static int bcm96348_pcibios_write(struct pci_bus *bus, unsigned int devfn, -+ int where, int size, u32 val) -+{ -+ volatile unsigned char *ioBase = (unsigned char *)(mpi->l2piobase | KSEG1); -+ uint32 data; -+ -+#if defined(CONFIG_USB) -+ if (PCI_SLOT(devfn) == USB_HOST_SLOT) -+ return pci63xx_int_write(devfn, where, &val, size); -+#endif -+ mpi_SetupPciConfigAccess(BCM_PCI_CFG(PCI_SLOT(devfn), PCI_FUNC(devfn), where)); -+ data = *(uint32 *)ioBase; -+ switch(size) { -+ case 1: -+ data = (data & ~(0xff << ((where & 3) << 3))) | -+ (val << ((where & 3) << 3)); -+ break; -+ case 2: -+ data = (data & ~(0xffff << ((where & 3) << 3))) | -+ (val << ((where & 3) << 3)); -+ break; -+ case 4: -+ data = val; -+ /* Special case for reading PCI device range */ -+ if ((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_5)) { -+ if (val == 0xffffffff) -+ pci_mem_size_rd = TRUE; -+ } -+ break; -+ default: -+ break; -+ } -+ *(uint32 *)ioBase = data; -+ udelay(500); -+ mpi_ClearPciConfigAccess(); -+ -+ return PCIBIOS_SUCCESSFUL; -+} -+ -+struct pci_ops bcm96348_pci_ops = { -+ .read = bcm96348_pcibios_read, -+ .write = bcm96348_pcibios_write -+}; -diff -Naurp linux-2.6.16.7-generic-patched/arch/mips/pci/pci-bcm96348.c linux-2.6.16.7-patched/arch/mips/pci/pci-bcm96348.c ---- linux-2.6.16.7-generic-patched/arch/mips/pci/pci-bcm96348.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.16.7-patched/arch/mips/pci/pci-bcm96348.c 2006-07-05 15:21:58.000000000 +0200 -@@ -0,0 +1,54 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+static struct resource bcm_pci_io_resource = { -+ .name = "bcm96348 pci IO space", -+ .start = BCM_PCI_IO_BASE, -+ .end = BCM_PCI_IO_BASE + BCM_PCI_IO_SIZE_64KB - 1, -+ .flags = IORESOURCE_IO -+}; -+ -+static struct resource bcm_pci_mem_resource = { -+ .name = "bcm96348 pci memory space", -+ .start = BCM_PCI_MEM_BASE, -+ .end = BCM_PCI_MEM_BASE + BCM_PCI_MEM_SIZE_16MB - 1, -+ .flags = IORESOURCE_MEM -+}; -+ -+extern struct pci_ops bcm96348_pci_ops; -+ -+struct pci_controller bcm96348_controller = { -+ .pci_ops = &bcm96348_pci_ops, -+ .io_resource = &bcm_pci_io_resource, -+ .mem_resource = &bcm_pci_mem_resource, -+}; -+ -+static void bcm96348_pci_init(void) -+{ -+ register_pci_controller(&bcm96348_controller); -+} -+ -+arch_initcall(bcm96348_pci_init); diff --git a/openwrt/target/linux/brcm63xx-2.6/patches/010-include_asm_mips.patch b/openwrt/target/linux/brcm63xx-2.6/patches/010-include_asm_mips.patch deleted file mode 100644 index 8efe11fcd6..0000000000 --- a/openwrt/target/linux/brcm63xx-2.6/patches/010-include_asm_mips.patch +++ /dev/null @@ -1,70 +0,0 @@ ---- linux-2.6.17/include/asm-mips/bootinfo.h 2006-06-18 03:49:35.000000000 +0200 -+++ linux-2.6.17-brcm63xx/include/asm-mips/bootinfo.h 2006-07-13 19:14:01.000000000 +0200 -@@ -218,6 +218,14 @@ - #define MACH_GROUP_TITAN 22 /* PMC-Sierra Titan */ - #define MACH_TITAN_YOSEMITE 1 /* PMC-Sierra Yosemite */ - -+/* -+ * Valid machtype for group BRCM -+ */ -+#define MACH_GROUP_BRCM 23 /* Broadcom boards */ -+#define MACH_BCM96338 0 -+#define MACH_BCM96345 1 -+#define MACH_BCM96348 2 -+ - #define CL_SIZE COMMAND_LINE_SIZE - - const char *get_system_type(void); ---- linux-2.6.17/include/asm-mips/cpu.h 2006-06-18 03:49:35.000000000 +0200 -+++ linux-2.6.17-brcm63xx/include/asm-mips/cpu.h 2006-07-13 19:15:17.000000000 +0200 -@@ -103,6 +103,13 @@ - - #define PRID_IMP_SR71000 0x0400 - -+/* These are the PRID's for when 23:16 == PRID_COMP_BROADCOM -+ */ -+ -+#define PRID_IMP_BCM6338 0x9000 -+#define PRID_IMP_BCM6345 0x8000 -+#define PRID_IMP_BCM6348 0x9100 -+ - /* - * Definitions for 7:0 on legacy processors - */ -@@ -200,7 +207,10 @@ - #define CPU_SB1A 62 - #define CPU_74K 63 - #define CPU_R14000 64 --#define CPU_LAST 64 -+#define CPU_BCM6338 65 -+#define CPU_BCM6345 66 -+#define CPU_BCM6348 67 -+#define CPU_LAST 67 - - /* - * ISA Level encodings ---- linux-2.6.17/include/asm-mips/mach-generic/param.h 2006-06-18 03:49:35.000000000 +0200 -+++ linux-2.6.17-brcm63xx/include/asm-mips/mach-generic/param.h 2006-07-13 19:17:26.000000000 +0200 -@@ -8,6 +8,6 @@ - #ifndef __ASM_MACH_GENERIC_PARAM_H - #define __ASM_MACH_GENERIC_PARAM_H - --#define HZ 1000 /* Internal kernel timer frequency */ -+#define HZ 200 /* Internal kernel timer frequency */ - - #endif /* __ASM_MACH_GENERIC_PARAM_H */ ---- linux-2.6.17/include/asm-mips/module.h 2006-06-18 03:49:35.000000000 +0200 -+++ linux-2.6.17-brcm63xx/include/asm-mips/module.h 2006-07-13 19:18:34.000000000 +0200 -@@ -113,6 +113,12 @@ - #define MODULE_PROC_FAMILY "RM9000 " - #elif defined CONFIG_CPU_SB1 - #define MODULE_PROC_FAMILY "SB1 " -+#elif defined CONFIG_CPU_BCM6338 -+#define MODULE_PROC_FAMILY "BCM6338 " -+#elif defined CONFIG_CPU_BCM6345 -+#define MODULE_PROC_FAMILY "BCM6345 " -+#elif defined CONFIG_CPU_BCM6348 -+#define MODULE_PROC_FAMILY "BCM6348 " - #else - #error MODULE_PROC_FAMILY undefined for your processor configuration - #endif diff --git a/openwrt/target/linux/brcm63xx-2.6/patches/011-include_mach_bcm963xx.patch b/openwrt/target/linux/brcm63xx-2.6/patches/011-include_mach_bcm963xx.patch deleted file mode 100644 index ad0cbbba56..0000000000 --- a/openwrt/target/linux/brcm63xx-2.6/patches/011-include_mach_bcm963xx.patch +++ /dev/null @@ -1,40 +0,0 @@ -diff -Naurp linux-2.6.16.7-generic-patched/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h linux-2.6.16.7-patched/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h ---- linux-2.6.16.7-generic-patched/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.16.7-patched/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h 2006-07-05 15:21:58.000000000 +0200 -@@ -0,0 +1,36 @@ -+#ifndef __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H -+#define __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H -+ -+#define cpu_has_tlb 1 -+#define cpu_has_4kex 4 -+#define cpu_has_4ktlb 8 -+#define cpu_has_fpu 0 -+#define cpu_has_32fpr 0 -+#define cpu_has_counter 0x40 -+#define cpu_has_watch 0 -+#define cpu_has_mips16 0 -+#define cpu_has_divec 0x200 -+#define cpu_has_vce 0 -+#define cpu_has_cache_cdex_p 0 -+#define cpu_has_cache_cdex_s 0 -+#define cpu_has_prefetch 0x40000 -+#define cpu_has_mcheck 0x2000 -+#define cpu_has_ejtag 0x4000 -+#define cpu_has_llsc 0x10000 -+#define cpu_has_vtag_icache 0 -+#define cpu_has_dc_aliases 0 -+#define cpu_has_ic_fills_f_dc 0 -+ -+#define cpu_has_nofpuex 0 -+#define cpu_has_64bits 0 -+#define cpu_has_64bit_zero_reg 0 -+#define cpu_has_64bit_gp_regs 0 -+#define cpu_has_64bit_addresses 0 -+ -+#define cpu_has_subset_pcaches 0 -+ -+#define cpu_dcache_line_size() 16 -+#define cpu_icache_line_size() 16 -+#define cpu_scache_line_size() 0 -+ -+#endif /* __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H */ diff --git a/openwrt/target/linux/brcm63xx-2.6/patches/020-bcmdrivers.patch b/openwrt/target/linux/brcm63xx-2.6/patches/020-bcmdrivers.patch deleted file mode 100644 index 5d6d6c9205..0000000000 --- a/openwrt/target/linux/brcm63xx-2.6/patches/020-bcmdrivers.patch +++ /dev/null @@ -1,3226 +0,0 @@ -diff -urN linux-2.6.17/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c linux-2.6.17-brcm63xx/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c ---- linux-2.6.17/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/char/serial/impl1/bcm63xx_cons.c 2006-08-03 16:42:38.000000000 +0200 -@@ -0,0 +1,1056 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+/* Description: Serial port driver for the BCM963XX. */ -+ -+#define CARDNAME "bcm963xx_serial driver" -+#define VERSION "2.0" -+#define VER_STR CARDNAME " v" VERSION "\n" -+ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* for definition of struct console */ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+static DEFINE_SPINLOCK(bcm963xx_serial_lock); -+ -+extern void _putc(char); -+extern void _puts(const char *); -+ -+typedef struct bcm_serial { -+ volatile Uart * port; -+ int type; -+ int flags; -+ int irq; -+ int baud_base; -+ int blocked_open; -+ unsigned short close_delay; -+ unsigned short closing_wait; -+ unsigned short line; /* port/line number */ -+ unsigned short cflags; /* line configuration flag */ -+ unsigned short x_char; /* xon/xoff character */ -+ unsigned short read_status_mask; /* mask for read condition */ -+ unsigned short ignore_status_mask; /* mask for ignore condition */ -+ unsigned long event; /* mask used in BH */ -+ int xmit_head; /* Position of the head */ -+ int xmit_tail; /* Position of the tail */ -+ int xmit_cnt; /* Count of the chars in the buffer */ -+ int count; /* indicates how many times it has been opened */ -+ int magic; -+ -+ struct async_icount icount; /* keep track of things ... */ -+ struct tty_struct *tty; /* tty associated */ -+ struct termios normal_termios; -+ -+ wait_queue_head_t open_wait; -+ wait_queue_head_t close_wait; -+ -+ long session; /* Session of opening process */ -+ long pgrp; /* pgrp of opening process */ -+ -+ unsigned char is_initialized; -+} Context; -+ -+ -+/*---------------------------------------------------------------------*/ -+/* Define bits in the Interrupt Enable register */ -+/*---------------------------------------------------------------------*/ -+/* Enable receive interrupt */ -+#define RXINT (RXFIFONE|RXOVFERR) -+ -+/* Enable transmit interrupt */ -+#define TXINT (TXFIFOEMT|TXUNDERR|TXOVFERR) -+ -+/* Enable receiver line status interrupt */ -+#define LSINT (RXBRK|RXPARERR|RXFRAMERR) -+ -+#define BCM_NUM_UARTS 1 -+ -+#define BD_BCM63XX_TIMER_CLOCK_INPUT (FPERIPH) -+ -+ -+static struct bcm_serial multi[BCM_NUM_UARTS]; -+static struct bcm_serial *lines[BCM_NUM_UARTS]; -+static struct tty_driver serial_driver; -+static struct tty_struct *serial_table[BCM_NUM_UARTS]; -+static struct termios *serial_termios[BCM_NUM_UARTS]; -+static struct termios *serial_termios_locked[BCM_NUM_UARTS]; -+static int serial_refcount; -+ -+ -+static void bcm_stop (struct tty_struct *tty); -+static void bcm_start (struct tty_struct *tty); -+static inline void receive_chars (struct bcm_serial * info); -+static int startup (struct bcm_serial *info); -+static void shutdown (struct bcm_serial * info); -+static void change_speed( volatile Uart *pUart, tcflag_t cFlag ); -+static void bcm63xx_cons_flush_chars (struct tty_struct *tty); -+static int bcm63xx_cons_write (struct tty_struct *tty, int from_user, -+ const unsigned char *buf, int count); -+static int bcm63xx_cons_write_room (struct tty_struct *tty); -+static int bcm_chars_in_buffer (struct tty_struct *tty); -+static void bcm_flush_buffer (struct tty_struct *tty); -+static void bcm_throttle (struct tty_struct *tty); -+static void bcm_unthrottle (struct tty_struct *tty); -+static void bcm_send_xchar (struct tty_struct *tty, char ch); -+static int get_serial_info(struct bcm_serial *info, struct serial_struct *retinfo); -+static int set_serial_info (struct bcm_serial *info, struct serial_struct *new_info); -+static int get_lsr_info (struct bcm_serial *info, unsigned int *value); -+static void send_break (struct bcm_serial *info, int duration); -+static int bcm_ioctl (struct tty_struct * tty, struct file * file, -+ unsigned int cmd, unsigned long arg); -+static void bcm_set_termios (struct tty_struct *tty, struct termios *old_termios); -+static void bcm63xx_cons_close (struct tty_struct *tty, struct file *filp); -+static void bcm_hangup (struct tty_struct *tty); -+static int block_til_ready (struct tty_struct *tty, struct file *filp, struct bcm_serial *info); -+static int bcm63xx_cons_open (struct tty_struct * tty, struct file * filp); -+static int __init bcm63xx_serialinit(void); -+ -+ -+/* -+ * ------------------------------------------------------------ -+ * rs_stop () and rs_start () -+ * -+ * These routines are called before setting or resetting -+ * tty->stopped. They enable or disable transmitter interrupts, -+ * as necessary. -+ * ------------------------------------------------------------ -+ */ -+static void bcm_stop (struct tty_struct *tty) -+{ -+} -+ -+static void bcm_start (struct tty_struct *tty) -+{ -+ _puts(CARDNAME " Start\n"); -+} -+ -+/* -+ * ------------------------------------------------------------ -+ * receive_char () -+ * -+ * This routine deals with inputs from any lines. -+ * ------------------------------------------------------------ -+ */ -+static inline void receive_chars (struct bcm_serial * info) -+{ -+ struct tty_struct *tty = 0; -+ struct async_icount * icount; -+ int ignore = 0; -+ unsigned short status, tmp; -+ UCHAR ch = 0; -+ while ((status = info->port->intStatus) & RXINT) -+ { -+ char flag_char = 0; -+ -+ if (status & RXFIFONE) -+ ch = info->port->Data; // Read the character -+ tty = info->tty; /* now tty points to the proper dev */ -+ icount = &info->icount; -+ if (! tty) -+ break; -+ if (!tty_buffer_request_room(tty, 1)) -+ break; -+ icount->rx++; -+ if (status & RXBRK) -+ { -+ flag_char = TTY_BREAK; -+ icount->brk++; -+ } -+ // keep track of the statistics -+ if (status & (RXFRAMERR | RXPARERR | RXOVFERR)) -+ { -+ if (status & RXPARERR) /* parity error */ -+ icount->parity++; -+ else -+ if (status & RXFRAMERR) /* frame error */ -+ icount->frame++; -+ if (status & RXOVFERR) -+ { -+ // Overflow. Reset the RX FIFO -+ info->port->fifoctl |= RSTRXFIFOS; -+ icount->overrun++; -+ } -+ // check to see if we should ignore the character -+ // and mask off conditions that should be ignored -+ if (status & info->ignore_status_mask) -+ { -+ if (++ignore > 100 ) -+ break; -+ goto ignore_char; -+ } -+ // Mask off the error conditions we want to ignore -+ tmp = status & info->read_status_mask; -+ if (tmp & RXPARERR) -+ { -+ flag_char = TTY_PARITY; -+ } -+ else -+ if (tmp & RXFRAMERR) -+ { -+ flag_char = TTY_FRAME; -+ } -+ if (tmp & RXOVFERR) -+ { -+ tty_insert_flip_char(tty, ch, flag_char); -+ ch = 0; -+ flag_char = TTY_OVERRUN; -+ if (!tty_buffer_request_room(tty, 1)) -+ break; -+ } -+ } -+ tty_insert_flip_char(tty, ch, flag_char); -+ } -+ignore_char: -+ if (tty) -+ tty_flip_buffer_push(tty); -+} -+ -+ -+/* -+ * ------------------------------------------------------------ -+ * bcm_interrupt () -+ * -+ * this is the main interrupt routine for the chip. -+ * It deals with the multiple ports. -+ * ------------------------------------------------------------ -+ */ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+static irqreturn_t bcm_interrupt (int irq, void * dev, struct pt_regs * regs) -+#else -+static void bcm_interrupt (int irq, void * dev, struct pt_regs * regs) -+#endif -+{ -+ struct bcm_serial * info = lines[0]; -+ UINT16 intStat; -+ -+ /* get pending interrupt flags from UART */ -+ -+ /* Mask with only the serial interrupts that are enabled */ -+ intStat = info->port->intStatus & info->port->intMask; -+ while (intStat) -+ { -+ if (intStat & RXINT) -+ receive_chars (info); -+ else -+ if (intStat & TXINT) -+ info->port->intStatus = TXINT; -+ else /* don't know what it was, so let's mask it */ -+ info->port->intMask &= ~intStat; -+ -+ intStat = info->port->intStatus & info->port->intMask; -+ } -+ -+ // Clear the interrupt -+ BcmHalInterruptEnable (INTERRUPT_ID_UART); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ return IRQ_HANDLED; -+#endif -+} -+ -+/* -+ * ------------------------------------------------------------------- -+ * startup () -+ * -+ * various initialization tasks -+ * ------------------------------------------------------------------- -+ */ -+static int startup (struct bcm_serial *info) -+{ -+ // Port is already started... -+ return 0; -+} -+ -+/* -+ * ------------------------------------------------------------------- -+ * shutdown () -+ * -+ * This routine will shutdown a serial port; interrupts are disabled, and -+ * DTR is dropped if the hangup on close termio flag is on. -+ * ------------------------------------------------------------------- -+ */ -+static void shutdown (struct bcm_serial * info) -+{ -+ unsigned long flags; -+ if (!info->is_initialized) -+ return; -+ -+ -+ /*save_flags (flags); -+ cli ();*/ -+ spin_lock_irqsave(&bcm963xx_serial_lock, flags); -+ -+ info->port->control &= ~(BRGEN|TXEN|RXEN); -+ if (info->tty) -+ set_bit (TTY_IO_ERROR, &info->tty->flags); -+ info->is_initialized = 0; -+ -+ //restore_flags (flags); -+ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags); -+} -+/* -+ * ------------------------------------------------------------------- -+ * change_speed () -+ * -+ * Set the baud rate, character size, parity and stop bits. -+ * ------------------------------------------------------------------- -+ */ -+static void change_speed( volatile Uart *pUart, tcflag_t cFlag ) -+{ -+ unsigned long ulFlags, ulBaud, ulClockFreqHz, ulTmp; -+ /*save_flags(ulFlags); -+ cli();*/ -+ spin_lock_irqsave(&bcm963xx_serial_lock, ulFlags); -+ -+ switch( cFlag & (CBAUD | CBAUDEX) ) -+ { -+ case B115200: -+ ulBaud = 115200; -+ break; -+ case B57600: -+ ulBaud = 57600; -+ break; -+ case B38400: -+ ulBaud = 38400; -+ break; -+ case B19200: -+ ulBaud = 19200; -+ break; -+ case B9600: -+ ulBaud = 9600; -+ break; -+ case B4800: -+ ulBaud = 4800; -+ break; -+ case B2400: -+ ulBaud = 2400; -+ break; -+ case B1800: -+ ulBaud = 1800; -+ break; -+ case B1200: -+ ulBaud = 1200; -+ break; -+ case B600: -+ ulBaud = 600; -+ break; -+ case B300: -+ ulBaud = 300; -+ break; -+ case B200: -+ ulBaud = 200; -+ break; -+ case B150: -+ ulBaud = 150; -+ break; -+ case B134: -+ ulBaud = 134; -+ break; -+ case B110: -+ ulBaud = 110; -+ break; -+ case B75: -+ ulBaud = 75; -+ break; -+ case B50: -+ ulBaud = 50; -+ break; -+ default: -+ ulBaud = 115200; -+ break; -+ } -+ -+ /* Calculate buad rate. */ -+ ulClockFreqHz = BD_BCM63XX_TIMER_CLOCK_INPUT; -+ ulTmp = (ulClockFreqHz / ulBaud) / 16; -+ if( ulTmp & 0x01 ) -+ ulTmp /= 2; /* Rounding up, so sub is already accounted for */ -+ else -+ ulTmp = (ulTmp / 2) - 1; /* Rounding down so we must sub 1 */ -+ pUart->baudword = ulTmp; -+ -+ /* Set character size, stop bits and parity. */ -+ switch( cFlag & CSIZE ) -+ { -+ case CS5: -+ ulTmp = BITS5SYM; /* select transmit 5 bit data size */ -+ break; -+ case CS6: -+ ulTmp = BITS6SYM; /* select transmit 6 bit data size */ -+ break; -+ case CS7: -+ ulTmp = BITS7SYM; /* select transmit 7 bit data size */ -+ break; -+ /*case CS8:*/ -+ default: -+ ulTmp = BITS8SYM; /* select transmit 8 bit data size */ -+ break; -+ } -+ if( cFlag & CSTOPB ) -+ ulTmp |= TWOSTOP; /* select 2 stop bits */ -+ else -+ ulTmp |= ONESTOP; /* select one stop bit */ -+ -+ /* Write these values into the config reg. */ -+ pUart->config = ulTmp; -+ pUart->control &= ~(RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN); -+ switch( cFlag & (PARENB | PARODD) ) -+ { -+ case PARENB|PARODD: -+ pUart->control |= RXPARITYEN | TXPARITYEN; -+ break; -+ case PARENB: -+ pUart->control |= RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN; -+ break; -+ default: -+ pUart->control |= 0; -+ break; -+ } -+ -+ /* Reset and flush uart */ -+ pUart->fifoctl = RSTTXFIFOS | RSTRXFIFOS; -+ //restore_flags( ulFlags ); -+ spin_unlock_irqrestore(&bcm963xx_serial_lock, ulFlags); -+} -+ -+ -+/* -+ * ------------------------------------------------------------------- -+ * bcm_flush_char () -+ * -+ * Nothing to flush. Polled I/O is used. -+ * ------------------------------------------------------------------- -+ */ -+static void bcm63xx_cons_flush_chars (struct tty_struct *tty) -+{ -+} -+ -+ -+/* -+ * ------------------------------------------------------------------- -+ * bcm63xx_cons_write () -+ * -+ * Main output routine using polled I/O. -+ * ------------------------------------------------------------------- -+ */ -+static int bcm63xx_cons_write (struct tty_struct *tty, int from_user, -+ const unsigned char *buf, int count) -+{ -+ int c; -+ -+ for (c = 0; c < count; c++) -+ _putc(buf[c]); -+ return count; -+} -+ -+/* -+ * ------------------------------------------------------------------- -+ * bcm63xx_cons_write_room () -+ * -+ * Compute the amount of space available for writing. -+ * ------------------------------------------------------------------- -+ */ -+static int bcm63xx_cons_write_room (struct tty_struct *tty) -+{ -+ /* Pick a number. Any number. Polled I/O is used. */ -+ return 1024; -+} -+ -+/* -+ * ------------------------------------------------------------------- -+ * bcm_chars_in_buffer () -+ * -+ * compute the amount of char left to be transmitted -+ * ------------------------------------------------------------------- -+ */ -+static int bcm_chars_in_buffer (struct tty_struct *tty) -+{ -+ return 0; -+} -+ -+/* -+ * ------------------------------------------------------------------- -+ * bcm_flush_buffer () -+ * -+ * Empty the output buffer -+ * ------------------------------------------------------------------- -+ */ -+static void bcm_flush_buffer (struct tty_struct *tty) -+{ -+} -+ -+/* -+ * ------------------------------------------------------------ -+ * bcm_throttle () and bcm_unthrottle () -+ * -+ * This routine is called by the upper-layer tty layer to signal that -+ * incoming characters should be throttled (or not). -+ * ------------------------------------------------------------ -+ */ -+static void bcm_throttle (struct tty_struct *tty) -+{ -+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; -+ if (I_IXOFF(tty)) -+ info->x_char = STOP_CHAR(tty); -+} -+ -+static void bcm_unthrottle (struct tty_struct *tty) -+{ -+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; -+ if (I_IXOFF(tty)) -+ { -+ if (info->x_char) -+ info->x_char = 0; -+ else -+ info->x_char = START_CHAR(tty); -+ } -+} -+ -+static void bcm_send_xchar (struct tty_struct *tty, char ch) -+{ -+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; -+ info->x_char = ch; -+ if (ch) -+ bcm_start (info->tty); -+} -+ -+/* -+ * ------------------------------------------------------------ -+ * rs_ioctl () and friends -+ * ------------------------------------------------------------ -+ */ -+static int get_serial_info(struct bcm_serial *info, struct serial_struct *retinfo) -+{ -+ struct serial_struct tmp; -+ -+ if (!retinfo) -+ return -EFAULT; -+ -+ memset (&tmp, 0, sizeof(tmp)); -+ tmp.type = info->type; -+ tmp.line = info->line; -+ tmp.port = (int) info->port; -+ tmp.irq = info->irq; -+ tmp.flags = 0; -+ tmp.baud_base = info->baud_base; -+ tmp.close_delay = info->close_delay; -+ tmp.closing_wait = info->closing_wait; -+ -+ return copy_to_user (retinfo, &tmp, sizeof(*retinfo)); -+} -+ -+static int set_serial_info (struct bcm_serial *info, struct serial_struct *new_info) -+{ -+ struct serial_struct new_serial; -+ struct bcm_serial old_info; -+ int retval = 0; -+ -+ if (!new_info) -+ return -EFAULT; -+ -+ copy_from_user (&new_serial, new_info, sizeof(new_serial)); -+ old_info = *info; -+ -+ if (!capable(CAP_SYS_ADMIN)) -+ return -EPERM; -+ -+ -+ if (info->count > 1) -+ return -EBUSY; -+ -+ /* OK, past this point, all the error checking has been done. -+ * At this point, we start making changes..... -+ */ -+ info->baud_base = new_serial.baud_base; -+ info->type = new_serial.type; -+ info->close_delay = new_serial.close_delay; -+ info->closing_wait = new_serial.closing_wait; -+ retval = startup (info); -+ return retval; -+} -+ -+/* -+ * get_lsr_info - get line status register info -+ * -+ * Purpose: Let user call ioctl() to get info when the UART physically -+ * is emptied. On bus types like RS485, the transmitter must -+ * release the bus after transmitting. This must be done when -+ * the transmit shift register is empty, not be done when the -+ * transmit holding register is empty. This functionality -+ * allows an RS485 driver to be written in user space. -+ */ -+static int get_lsr_info (struct bcm_serial *info, unsigned int *value) -+{ -+ return( 0 ); -+} -+ -+/* -+ * This routine sends a break character out the serial port. -+ */ -+static void send_break (struct bcm_serial *info, int duration) -+{ -+ unsigned long flags; -+ -+ if (!info->port) -+ return; -+ -+ current->state = TASK_INTERRUPTIBLE; -+ -+ /*save_flags (flags); -+ cli();*/ -+ spin_lock_irqsave(&bcm963xx_serial_lock, flags); -+ -+ info->port->control |= XMITBREAK; -+ schedule_timeout(duration); -+ info->port->control &= ~XMITBREAK; -+ -+ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags); -+ //restore_flags (flags); -+} -+ -+static int bcm_ioctl (struct tty_struct * tty, struct file * file, -+ unsigned int cmd, unsigned long arg) -+{ -+ int error; -+ struct bcm_serial * info = (struct bcm_serial *)tty->driver_data; -+ int retval; -+ -+ if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && -+ (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) && -+ (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) -+ { -+ if (tty->flags & (1 << TTY_IO_ERROR)) -+ return -EIO; -+ } -+ switch (cmd) -+ { -+ -+ case TCSBRK: /* SVID version: non-zero arg --> no break */ -+ retval = tty_check_change (tty); -+ if (retval) -+ return retval; -+ tty_wait_until_sent (tty, 0); -+ if (!arg) -+ send_break (info, HZ/4); /* 1/4 second */ -+ return 0; -+ -+ case TCSBRKP: /* support for POSIX tcsendbreak() */ -+ retval = tty_check_change (tty); -+ if (retval) -+ return retval; -+ tty_wait_until_sent (tty, 0); -+ send_break (info, arg ? arg*(HZ/10) : HZ/4); -+ return 0; -+ -+ case TIOCGSOFTCAR: -+ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(long)); -+ if (!error) -+ return -EFAULT; -+ else -+ { -+ put_user (C_CLOCAL(tty) ? 1 : 0, (unsigned long *)arg); -+ return 0; -+ } -+ -+ case TIOCSSOFTCAR: -+ error = get_user (arg, (unsigned long *)arg); -+ if (error) -+ return error; -+ tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0)); -+ return 0; -+ -+ case TIOCGSERIAL: -+ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(struct serial_struct)); -+ if (!error) -+ return -EFAULT; -+ else -+ return get_serial_info (info, (struct serial_struct *)arg); -+ -+ case TIOCSSERIAL: -+ return set_serial_info (info, (struct serial_struct *) arg); -+ -+ case TIOCSERGETLSR: /* Get line status register */ -+ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(unsigned int)); -+ if (!error) -+ return -EFAULT; -+ else -+ return get_lsr_info (info, (unsigned int *)arg); -+ -+ case TIOCSERGSTRUCT: -+ error = access_ok (VERIFY_WRITE, (void *)arg, sizeof(struct bcm_serial)); -+ if (!error) -+ return -EFAULT; -+ else -+ { -+ copy_to_user((struct bcm_serial *)arg, info, sizeof(struct bcm_serial)); -+ return 0; -+ } -+ -+ default: -+ return -ENOIOCTLCMD; -+ } -+ return 0; -+} -+ -+static void bcm_set_termios (struct tty_struct *tty, struct termios *old_termios) -+{ -+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; -+ -+ if( tty->termios->c_cflag != old_termios->c_cflag ) -+ change_speed (info->port, tty->termios->c_cflag); -+} -+ -+/* -+ * ------------------------------------------------------------ -+ * bcm63xx_cons_close() -+ * -+ * This routine is called when the serial port gets closed. First, we -+ * wait for the last remaining data to be sent. Then, we turn off -+ * the transmit enable and receive enable flags. -+ * ------------------------------------------------------------ -+ */ -+static void bcm63xx_cons_close (struct tty_struct *tty, struct file *filp) -+{ -+ struct bcm_serial * info = (struct bcm_serial *)tty->driver_data; -+ unsigned long flags; -+ -+ if (!info) -+ return; -+ -+ /*save_flags (flags); -+ cli();*/ -+ spin_lock_irqsave(&bcm963xx_serial_lock, flags); -+ -+ if (tty_hung_up_p (filp)) -+ { -+ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags); -+ //restore_flags (flags); -+ return; -+ } -+ -+ if ((tty->count == 1) && (info->count != 1)) -+ { -+ -+ /* Uh, oh. tty->count is 1, which means that the tty -+ * structure will be freed. Info->count should always -+ * be one in these conditions. If it's greater than -+ * one, we've got real problems, since it means the -+ * serial port won't be shutdown. -+ */ -+ printk("bcm63xx_cons_close: bad serial port count; tty->count is 1, " -+ "info->count is %d\n", info->count); -+ info->count = 1; -+ } -+ -+ if (--info->count < 0) -+ { -+ printk("ds_close: bad serial port count for ttys%d: %d\n", -+ info->line, info->count); -+ info->count = 0; -+ } -+ -+ if (info->count) -+ { -+ //restore_flags (flags); -+ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags); -+ return; -+ } -+ -+ /* Now we wait for the transmit buffer to clear; and we notify -+ * the line discipline to only process XON/XOFF characters. -+ */ -+ tty->closing = 1; -+ -+ /* At this point we stop accepting input. To do this, we -+ * disable the receive line status interrupts. -+ */ -+ shutdown (info); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ if (tty->driver->flush_buffer) -+ tty->driver->flush_buffer (tty); -+#else -+ if (tty->driver.flush_buffer) -+ tty->driver.flush_buffer (tty); -+#endif -+ if (tty->ldisc.flush_buffer) -+ tty->ldisc.flush_buffer (tty); -+ -+ tty->closing = 0; -+ info->event = 0; -+ info->tty = 0; -+ if (tty->ldisc.num != tty_ldisc_get(N_TTY)->num) -+ { -+ if (tty->ldisc.close) -+ (tty->ldisc.close)(tty); -+ tty->ldisc = *tty_ldisc_get(N_TTY); -+ tty->termios->c_line = N_TTY; -+ if (tty->ldisc.open) -+ (tty->ldisc.open)(tty); -+ } -+ if (info->blocked_open) -+ { -+ if (info->close_delay) -+ { -+ current->state = TASK_INTERRUPTIBLE; -+ schedule_timeout(info->close_delay); -+ } -+ wake_up_interruptible (&info->open_wait); -+ } -+ wake_up_interruptible (&info->close_wait); -+ -+ //restore_flags (flags); -+ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags); -+} -+ -+/* -+ * bcm_hangup () --- called by tty_hangup() when a hangup is signaled. -+ */ -+static void bcm_hangup (struct tty_struct *tty) -+{ -+ -+ struct bcm_serial *info = (struct bcm_serial *)tty->driver_data; -+ -+ shutdown (info); -+ info->event = 0; -+ info->count = 0; -+ info->tty = 0; -+ wake_up_interruptible (&info->open_wait); -+} -+ -+/* -+ * ------------------------------------------------------------ -+ * rs_open() and friends -+ * ------------------------------------------------------------ -+ */ -+static int block_til_ready (struct tty_struct *tty, struct file *filp, -+ struct bcm_serial *info) -+{ -+ return 0; -+} -+ -+/* -+ * This routine is called whenever a serial port is opened. It -+ * enables interrupts for a serial port. It also performs the -+ * serial-specific initialization for the tty structure. -+ */ -+static int bcm63xx_cons_open (struct tty_struct * tty, struct file * filp) -+{ -+ struct bcm_serial *info; -+ int retval, line; -+ -+ // Make sure we're only opening on of the ports we support -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ line = MINOR(tty->driver->cdev.dev) - tty->driver->minor_start; -+#else -+ line = MINOR(tty->device) - tty->driver.minor_start; -+#endif -+ -+ if ((line < 0) || (line >= BCM_NUM_UARTS)) -+ return -ENODEV; -+ -+ info = lines[line]; -+ -+ info->port->intMask = 0; /* Clear any pending interrupts */ -+ info->port->intMask = RXINT; /* Enable RX */ -+ -+ info->count++; -+ tty->driver_data = info; -+ info->tty = tty; -+ BcmHalInterruptEnable (INTERRUPT_ID_UART); -+ -+ // Start up serial port -+ retval = startup (info); -+ if (retval) -+ return retval; -+ -+ retval = block_til_ready (tty, filp, info); -+ if (retval) -+ return retval; -+ -+ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ info->pgrp = process_group(current); -+ info->session = current->signal->session; -+#else -+ info->session = current->session; -+ info->pgrp = current->pgrp; -+#endif -+ -+ return 0; -+} -+ -+/* -------------------------------------------------------------------------- -+ Name: bcm63xx_serialinit -+ Purpose: Initialize our BCM63xx serial driver -+-------------------------------------------------------------------------- */ -+static int __init bcm63xx_serialinit(void) -+{ -+ int i, flags; -+ struct bcm_serial * info; -+ -+ // Print the driver version information -+ printk(VER_STR); -+ -+ memset(&serial_driver, 0, sizeof(struct tty_driver)); -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ serial_driver.owner = THIS_MODULE; -+ serial_driver.devfs_name = "tts/"; -+#endif -+ serial_driver.magic = TTY_DRIVER_MAGIC; -+ serial_driver.name = "ttyS"; -+ serial_driver.major = TTY_MAJOR; -+ serial_driver.minor_start = 64; -+ serial_driver.num = BCM_NUM_UARTS; -+ serial_driver.type = TTY_DRIVER_TYPE_SERIAL; -+ serial_driver.subtype = SERIAL_TYPE_NORMAL; -+ serial_driver.init_termios = tty_std_termios; -+ serial_driver.init_termios.c_cflag = B115200 | CS8 | CREAD | CLOCAL; -+ serial_driver.flags = TTY_DRIVER_REAL_RAW; -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) -+ serial_driver.refcount = serial_refcount; -+ serial_driver.ttys = serial_table; -+#else -+ serial_driver.refcount = &serial_refcount; -+ serial_driver.table = serial_table; -+#endif -+ -+ serial_driver.termios = serial_termios; -+ serial_driver.termios_locked = serial_termios_locked; -+ serial_driver.open = bcm63xx_cons_open; -+ serial_driver.close = bcm63xx_cons_close; -+ serial_driver.write = bcm63xx_cons_write; -+ serial_driver.flush_chars = bcm63xx_cons_flush_chars; -+ serial_driver.write_room = bcm63xx_cons_write_room; -+ serial_driver.chars_in_buffer = bcm_chars_in_buffer; -+ serial_driver.flush_buffer = bcm_flush_buffer; -+ serial_driver.ioctl = bcm_ioctl; -+ serial_driver.throttle = bcm_throttle; -+ serial_driver.unthrottle = bcm_unthrottle; -+ serial_driver.send_xchar = bcm_send_xchar; -+ serial_driver.set_termios = bcm_set_termios; -+ serial_driver.stop = bcm_stop; -+ serial_driver.start = bcm_start; -+ serial_driver.hangup = bcm_hangup; -+ -+ if (tty_register_driver (&serial_driver)) -+ panic("Couldn't register serial driver\n"); -+ -+ //save_flags(flags); cli(); -+ spin_lock_irqsave(&bcm963xx_serial_lock, flags); -+ -+ for (i = 0; i < BCM_NUM_UARTS; i++) -+ { -+ info = &multi[i]; -+ lines[i] = info; -+ info->port = (Uart *) ((char *)UART_BASE + (i * 0x20)); -+ info->irq = (2 - i) + 8; -+ info->line = i; -+ info->tty = 0; -+ info->close_delay = 50; -+ info->closing_wait = 3000; -+ info->x_char = 0; -+ info->event = 0; -+ info->count = 0; -+ info->blocked_open = 0; -+ info->normal_termios = serial_driver.init_termios; -+ init_waitqueue_head(&info->open_wait); -+ init_waitqueue_head(&info->close_wait); -+ -+ /* If we are pointing to address zero then punt - not correctly -+ * set up in setup.c to handle this. -+ */ -+ if (! info->port) -+ return 0; -+ BcmHalMapInterrupt(bcm_interrupt, 0, INTERRUPT_ID_UART); -+ } -+ -+ /* order matters here... the trick is that flags -+ * is updated... in request_irq - to immediatedly obliterate -+ * it is unwise. -+ */ -+ //restore_flags(flags); -+ spin_unlock_irqrestore(&bcm963xx_serial_lock, flags); -+ return 0; -+} -+ -+module_init(bcm63xx_serialinit); -+ -+/* -------------------------------------------------------------------------- -+ Name: bcm_console_print -+ Purpose: bcm_console_print is registered for printk. -+ The console_lock must be held when we get here. -+-------------------------------------------------------------------------- */ -+static void bcm_console_print (struct console * cons, const char * str, -+ unsigned int count) -+{ -+ unsigned int i; -+ //_puts(str); -+ for(i=0; iindex; -+ return &serial_driver; -+} -+ -+static int __init bcm_console_setup(struct console * co, char * options) -+{ -+ return 0; -+} -+ -+static struct console bcm_sercons = { -+ .name = "ttyS", -+ .write = bcm_console_print, -+ .device = bcm_console_device, -+ .setup = bcm_console_setup, -+ .flags = CON_PRINTBUFFER, // CON_CONSDEV, CONSOLE_LINE, -+ .index = -1, -+}; -+ -+static int __init bcm63xx_console_init(void) -+{ -+ register_console(&bcm_sercons); -+ return 0; -+} -+ -+console_initcall(bcm63xx_console_init); -diff -urN linux-2.6.17/bcmdrivers/opensource/char/serial/impl1/Makefile linux-2.6.17-brcm63xx/bcmdrivers/opensource/char/serial/impl1/Makefile ---- linux-2.6.17/bcmdrivers/opensource/char/serial/impl1/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/char/serial/impl1/Makefile 2006-08-03 16:42:38.000000000 +0200 -@@ -0,0 +1,13 @@ -+# File: bcmdrivers/opensource/char/serial -+# -+# Makefile for the BCM63xx serial/console driver -+ -+obj-$(CONFIG_BCM_SERIAL) += bcm63xx_cons.o -+ -+EXTRA_CFLAGS += -I$(INC_BRCMDRIVER_PUB_PATH)/$(BRCM_BOARD) -+ -+-include $(TOPDIR)/Rules.make -+ -+clean: -+ rm -f core *.o *.a *.s -+ -diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/6338_intr.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6338_intr.h ---- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/6338_intr.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6338_intr.h 2006-08-03 16:42:38.000000000 +0200 -@@ -0,0 +1,64 @@ -+/* -+<:copyright-gpl -+ Copyright 2003 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+#ifndef __6338_INTR_H -+#define __6338_INTR_H -+ -+/*=====================================================================*/ -+/* BCM6338 External Interrupt Level Assignments */ -+/*=====================================================================*/ -+#define INTERRUPT_ID_EXTERNAL_0 3 -+#define INTERRUPT_ID_EXTERNAL_1 4 -+#define INTERRUPT_ID_EXTERNAL_2 5 -+#define INTERRUPT_ID_EXTERNAL_3 6 -+ -+/*=====================================================================*/ -+/* BCM6338 Timer Interrupt Level Assignments */ -+/*=====================================================================*/ -+#define MIPS_TIMER_INT 7 -+ -+/*=====================================================================*/ -+/* Peripheral ISR Table Offset */ -+/*=====================================================================*/ -+#define INTERNAL_ISR_TABLE_OFFSET 8 -+ -+/*=====================================================================*/ -+/* Logical Peripheral Interrupt IDs */ -+/*=====================================================================*/ -+ -+#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0) -+#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1) -+#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2) -+#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 4) -+#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 5) -+#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 6) -+#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 7) -+#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8) -+#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9) -+#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 10) -+#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 11) -+#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 12) -+#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 13) -+#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14) -+#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15) -+#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16) -+#define INTERRUPT_ID_SDIO (INTERNAL_ISR_TABLE_OFFSET + 17) -+ -+#endif /* __BCM6338_H */ -+ -diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/6338_map_part.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6338_map_part.h ---- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/6338_map_part.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6338_map_part.h 2006-08-03 16:42:38.000000000 +0200 -@@ -0,0 +1,334 @@ -+/* -+<:copyright-gpl -+ Copyright 2004 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+#ifndef __BCM6338_MAP_H -+#define __BCM6338_MAP_H -+ -+#include "bcmtypes.h" -+ -+#define PERF_BASE 0xfffe0000 -+#define TIMR_BASE 0xfffe0200 -+#define UART_BASE 0xfffe0300 -+#define GPIO_BASE 0xfffe0400 -+#define SPI_BASE 0xfffe0c00 -+ -+typedef struct PerfControl { -+ uint32 RevID; -+ uint16 testControl; -+ uint16 blkEnables; -+#define EMAC_CLK_EN 0x0010 -+#define USBS_CLK_EN 0x0010 -+#define SAR_CLK_EN 0x0020 -+ -+#define SPI_CLK_EN 0x0200 -+ -+ uint32 pll_control; -+#define SOFT_RESET 0x00000001 -+ -+ uint32 IrqMask; -+ uint32 IrqStatus; -+ -+ uint32 ExtIrqCfg; -+#define EI_SENSE_SHFT 0 -+#define EI_STATUS_SHFT 5 -+#define EI_CLEAR_SHFT 10 -+#define EI_MASK_SHFT 15 -+#define EI_INSENS_SHFT 20 -+#define EI_LEVEL_SHFT 25 -+ -+ uint32 unused[4]; /* (18) */ -+ uint32 BlockSoftReset; /* (28) */ -+#define BSR_SPI 0x00000001 -+#define BSR_EMAC 0x00000004 -+#define BSR_USBH 0x00000008 -+#define BSR_USBS 0x00000010 -+#define BSR_ADSL 0x00000020 -+#define BSR_DMAMEM 0x00000040 -+#define BSR_SAR 0x00000080 -+#define BSR_ACLC 0x00000100 -+#define BSR_ADSL_MIPS_PLL 0x00000400 -+#define BSR_ALL_BLOCKS \ -+ (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \ -+ BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL) -+} PerfControl; -+ -+#define PERF ((volatile PerfControl * const) PERF_BASE) -+ -+ -+typedef struct Timer { -+ uint16 unused0; -+ byte TimerMask; -+#define TIMER0EN 0x01 -+#define TIMER1EN 0x02 -+#define TIMER2EN 0x04 -+ byte TimerInts; -+#define TIMER0 0x01 -+#define TIMER1 0x02 -+#define TIMER2 0x04 -+#define WATCHDOG 0x08 -+ uint32 TimerCtl0; -+ uint32 TimerCtl1; -+ uint32 TimerCtl2; -+#define TIMERENABLE 0x80000000 -+#define RSTCNTCLR 0x40000000 -+ uint32 TimerCnt0; -+ uint32 TimerCnt1; -+ uint32 TimerCnt2; -+ uint32 WatchDogDefCount; -+ -+ /* Write 0xff00 0x00ff to Start timer -+ * Write 0xee00 0x00ee to Stop and re-load default count -+ * Read from this register returns current watch dog count -+ */ -+ uint32 WatchDogCtl; -+ -+ /* Number of 40-MHz ticks for WD Reset pulse to last */ -+ uint32 WDResetCount; -+} Timer; -+ -+#define TIMER ((volatile Timer * const) TIMR_BASE) -+typedef struct UartChannel { -+ byte unused0; -+ byte control; -+#define BRGEN 0x80 /* Control register bit defs */ -+#define TXEN 0x40 -+#define RXEN 0x20 -+#define LOOPBK 0x10 -+#define TXPARITYEN 0x08 -+#define TXPARITYEVEN 0x04 -+#define RXPARITYEN 0x02 -+#define RXPARITYEVEN 0x01 -+ -+ byte config; -+#define XMITBREAK 0x40 -+#define BITS5SYM 0x00 -+#define BITS6SYM 0x10 -+#define BITS7SYM 0x20 -+#define BITS8SYM 0x30 -+#define ONESTOP 0x07 -+#define TWOSTOP 0x0f -+ /* 4-LSBS represent STOP bits/char -+ * in 1/8 bit-time intervals. Zero -+ * represents 1/8 stop bit interval. -+ * Fifteen represents 2 stop bits. -+ */ -+ byte fifoctl; -+#define RSTTXFIFOS 0x80 -+#define RSTRXFIFOS 0x40 -+ /* 5-bit TimeoutCnt is in low bits of this register. -+ * This count represents the number of characters -+ * idle times before setting receive Irq when below threshold -+ */ -+ uint32 baudword; -+ /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate -+ */ -+ -+ byte txf_levl; /* Read-only fifo depth */ -+ byte rxf_levl; /* Read-only fifo depth */ -+ byte fifocfg; /* Upper 4-bits are TxThresh, Lower are -+ * RxThreshold. Irq can be asserted -+ * when rx fifo> thresh, txfifo -+*/ -+ -+#ifndef __6345_INTR_H -+#define __6345_INTR_H -+ -+ -+/*=====================================================================*/ -+/* BCM6345 External Interrupt Level Assignments */ -+/*=====================================================================*/ -+#define INTERRUPT_ID_EXTERNAL_0 3 -+#define INTERRUPT_ID_EXTERNAL_1 4 -+#define INTERRUPT_ID_EXTERNAL_2 5 -+#define INTERRUPT_ID_EXTERNAL_3 6 -+ -+/*=====================================================================*/ -+/* BCM6345 Timer Interrupt Level Assignments */ -+/*=====================================================================*/ -+#define MIPS_TIMER_INT 7 -+ -+/*=====================================================================*/ -+/* Peripheral ISR Table Offset */ -+/*=====================================================================*/ -+#define INTERNAL_ISR_TABLE_OFFSET 8 -+#define DMA_ISR_TABLE_OFFSET (INTERNAL_ISR_TABLE_OFFSET + 13) -+ -+/*=====================================================================*/ -+/* Logical Peripheral Interrupt IDs */ -+/*=====================================================================*/ -+ -+/* Internal peripheral interrupt IDs */ -+#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0) -+#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2) -+#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 3) -+#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 4) -+#define INTERRUPT_ID_USB (INTERNAL_ISR_TABLE_OFFSET + 5) -+#define INTERRUPT_ID_EMAC (INTERNAL_ISR_TABLE_OFFSET + 8) -+#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 12) -+ -+/* DMA channel interrupt IDs */ -+#define INTERRUPT_ID_EMAC_RX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_RX_CHAN) -+#define INTERRUPT_ID_EMAC_TX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_TX_CHAN) -+#define INTERRUPT_ID_EBI_RX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_RX_CHAN) -+#define INTERRUPT_ID_EBI_TX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_TX_CHAN) -+#define INTERRUPT_ID_RESERVED_RX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_RX_CHAN) -+#define INTERRUPT_ID_RESERVED_TX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_TX_CHAN) -+#define INTERRUPT_ID_USB_BULK_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_RX_CHAN) -+#define INTERRUPT_ID_USB_BULK_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_TX_CHAN) -+#define INTERRUPT_ID_USB_CNTL_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_RX_CHAN) -+#define INTERRUPT_ID_USB_CNTL_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_TX_CHAN) -+#define INTERRUPT_ID_USB_ISO_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_RX_CHAN) -+#define INTERRUPT_ID_USB_ISO_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_TX_CHAN) -+ -+ -+#endif /* __BCM6345_H */ -+ -diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/6345_map_part.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6345_map_part.h ---- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/6345_map_part.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6345_map_part.h 2006-08-03 16:42:38.000000000 +0200 -@@ -0,0 +1,163 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+#ifndef __BCM6345_MAP_H -+#define __BCM6345_MAP_H -+ -+ -+#include "bcmtypes.h" -+#include "6345_intr.h" -+ -+typedef struct IntControl { -+ uint32 RevID; -+ uint16 testControl; -+ uint16 blkEnables; -+#define USB_CLK_EN 0x0100 -+#define EMAC_CLK_EN 0x0080 -+#define UART_CLK_EN 0x0008 -+#define CPU_CLK_EN 0x0001 -+ -+ uint32 pll_control; -+#define SOFT_RESET 0x00000001 -+ -+ uint32 IrqMask; -+ uint32 IrqStatus; -+ -+ uint32 ExtIrqCfg; -+#define EI_SENSE_SHFT 0 -+#define EI_STATUS_SHFT 4 -+#define EI_CLEAR_SHFT 8 -+#define EI_MASK_SHFT 12 -+#define EI_INSENS_SHFT 16 -+#define EI_LEVEL_SHFT 20 -+} IntControl; -+ -+#define INTC_BASE 0xfffe0000 -+#define PERF ((volatile IntControl * const) INTC_BASE) -+ -+#define TIMR_BASE 0xfffe0200 -+typedef struct Timer { -+ uint16 unused0; -+ byte TimerMask; -+#define TIMER0EN 0x01 -+#define TIMER1EN 0x02 -+#define TIMER2EN 0x04 -+ byte TimerInts; -+#define TIMER0 0x01 -+#define TIMER1 0x02 -+#define TIMER2 0x04 -+#define WATCHDOG 0x08 -+ uint32 TimerCtl0; -+ uint32 TimerCtl1; -+ uint32 TimerCtl2; -+#define TIMERENABLE 0x80000000 -+#define RSTCNTCLR 0x40000000 -+ uint32 TimerCnt0; -+ uint32 TimerCnt1; -+ uint32 TimerCnt2; -+ uint32 WatchDogDefCount; -+ -+ /* Write 0xff00 0x00ff to Start timer -+ * Write 0xee00 0x00ee to Stop and re-load default count -+ * Read from this register returns current watch dog count -+ */ -+ uint32 WatchDogCtl; -+ -+ /* Number of 40-MHz ticks for WD Reset pulse to last */ -+ uint32 WDResetCount; -+} Timer; -+ -+#define TIMER ((volatile Timer * const) TIMR_BASE) -+ -+typedef struct UartChannel { -+ byte unused0; -+ byte control; -+#define BRGEN 0x80 /* Control register bit defs */ -+#define TXEN 0x40 -+#define RXEN 0x20 -+#define TXPARITYEN 0x08 -+#define TXPARITYEVEN 0x04 -+#define RXPARITYEN 0x02 -+#define RXPARITYEVEN 0x01 -+ byte config; -+#define BITS5SYM 0x00 -+#define BITS6SYM 0x10 -+#define BITS7SYM 0x20 -+#define BITS8SYM 0x30 -+#define XMITBREAK 0x40 -+#define ONESTOP 0x07 -+#define TWOSTOP 0x0f -+ -+ byte fifoctl; -+#define RSTTXFIFOS 0x80 -+#define RSTRXFIFOS 0x40 -+ uint32 baudword; -+ -+ byte txf_levl; -+ byte rxf_levl; -+ byte fifocfg; -+ byte prog_out; -+ -+ byte unused1; -+ byte DeltaIPEdgeNoSense; -+ byte DeltaIPConfig_Mask; -+ byte DeltaIP_SyncIP; -+ uint16 intMask; -+ uint16 intStatus; -+#define TXUNDERR 0x0002 -+#define TXOVFERR 0x0004 -+#define TXFIFOEMT 0x0020 -+#define RXOVFERR 0x0080 -+#define RXFIFONE 0x0800 -+#define RXFRAMERR 0x1000 -+#define RXPARERR 0x2000 -+#define RXBRK 0x4000 -+ -+ uint16 unused2; -+ uint16 Data; -+ uint32 unused3; -+ uint32 unused4; -+} Uart; -+ -+#define UART_BASE 0xfffe0300 -+#define UART ((volatile Uart * const) UART_BASE) -+ -+typedef struct GpioControl { -+ uint16 unused0; -+ byte unused1; -+ byte TBusSel; -+ -+ uint16 unused2; -+ uint16 GPIODir; -+ byte unused3; -+ byte Leds; -+ uint16 GPIOio; -+ -+ uint32 UartCtl; -+} GpioControl; -+ -+#define GPIO_BASE 0xfffe0400 -+#define GPIO ((volatile GpioControl * const) GPIO_BASE) -+ -+#define GPIO_NUM_MAX_BITS_MASK 0x0f -+#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK)) -+ -+ -+#endif -+ -diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/6348_intr.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6348_intr.h ---- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/6348_intr.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6348_intr.h 2006-08-03 16:42:38.000000000 +0200 -@@ -0,0 +1,74 @@ -+/* -+<:copyright-gpl -+ Copyright 2003 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+#ifndef __6348_INTR_H -+#define __6348_INTR_H -+ -+ -+/*=====================================================================*/ -+/* BCM6348 External Interrupt Level Assignments */ -+/*=====================================================================*/ -+#define INTERRUPT_ID_EXTERNAL_0 3 -+#define INTERRUPT_ID_EXTERNAL_1 4 -+#define INTERRUPT_ID_EXTERNAL_2 5 -+#define INTERRUPT_ID_EXTERNAL_3 6 -+ -+/*=====================================================================*/ -+/* BCM6348 Timer Interrupt Level Assignments */ -+/*=====================================================================*/ -+#define MIPS_TIMER_INT 7 -+ -+/*=====================================================================*/ -+/* Peripheral ISR Table Offset */ -+/*=====================================================================*/ -+#define INTERNAL_ISR_TABLE_OFFSET 8 -+ -+/*=====================================================================*/ -+/* Logical Peripheral Interrupt IDs */ -+/*=====================================================================*/ -+ -+#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0) -+#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1) -+#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2) -+#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 4) -+#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 5) -+#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 6) -+#define INTERRUPT_ID_EMAC2 (INTERNAL_ISR_TABLE_OFFSET + 7) -+#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8) -+#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9) -+#define INTERRUPT_ID_M2M (INTERNAL_ISR_TABLE_OFFSET + 10) -+#define INTERRUPT_ID_ACLC (INTERNAL_ISR_TABLE_OFFSET + 11) -+#define INTERRUPT_ID_USBH (INTERNAL_ISR_TABLE_OFFSET + 12) -+#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 13) -+#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14) -+#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15) -+#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16) -+#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 17) -+#define INTERRUPT_ID_USB_ISO_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 18) -+#define INTERRUPT_ID_USB_ISO_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 19) -+#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 20) -+#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 21) -+#define INTERRUPT_ID_EMAC2_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 22) -+#define INTERRUPT_ID_EMAC2_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 23) -+#define INTERRUPT_ID_MPI (INTERNAL_ISR_TABLE_OFFSET + 24) -+#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 25) -+ -+ -+#endif /* __BCM6348_H */ -+ -diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/6348_map_part.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6348_map_part.h ---- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/6348_map_part.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/6348_map_part.h 2006-08-03 16:42:38.000000000 +0200 -@@ -0,0 +1,500 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+#ifndef __BCM6348_MAP_H -+#define __BCM6348_MAP_H -+ -+#include "bcmtypes.h" -+ -+#define PERF_BASE 0xfffe0000 -+#define TIMR_BASE 0xfffe0200 -+#define UART_BASE 0xfffe0300 -+#define GPIO_BASE 0xfffe0400 -+#define MPI_BASE 0xfffe2000 /* MPI control registers */ -+#define USB_HOST_BASE 0xfffe1b00 /* USB host registers */ -+#define USB_HOST_NON_OHCI 0xfffe1c00 /* USB host non-OHCI registers */ -+ -+typedef struct PerfControl { -+ uint32 RevID; -+ uint16 testControl; -+ uint16 blkEnables; -+#define EMAC_CLK_EN 0x0010 -+#define SAR_CLK_EN 0x0020 -+#define USBS_CLK_EN 0x0040 -+#define USBH_CLK_EN 0x0100 -+ -+ uint32 pll_control; -+#define SOFT_RESET 0x00000001 -+ -+ uint32 IrqMask; -+ uint32 IrqStatus; -+ -+ uint32 ExtIrqCfg; -+#define EI_SENSE_SHFT 0 -+#define EI_STATUS_SHFT 5 -+#define EI_CLEAR_SHFT 10 -+#define EI_MASK_SHFT 15 -+#define EI_INSENS_SHFT 20 -+#define EI_LEVEL_SHFT 25 -+ -+ uint32 unused[4]; /* (18) */ -+ uint32 BlockSoftReset; /* (28) */ -+#define BSR_SPI 0x00000001 -+#define BSR_EMAC 0x00000004 -+#define BSR_USBH 0x00000008 -+#define BSR_USBS 0x00000010 -+#define BSR_ADSL 0x00000020 -+#define BSR_DMAMEM 0x00000040 -+#define BSR_SAR 0x00000080 -+#define BSR_ACLC 0x00000100 -+#define BSR_ADSL_MIPS_PLL 0x00000400 -+#define BSR_ALL_BLOCKS \ -+ (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \ -+ BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL) -+ uint32 unused2[2]; /* (2c) */ -+ uint32 PllStrap; /* (34) */ -+#define PLL_N1_SHFT 20 -+#define PLL_N1_MASK (7< thresh, txfifo= 32) ? (1 << ((X-32) & GPIO_NUM_MAX_BITS_MASK_HIGH)) : (0) ) -+ -+ -+/* -+** External Bus Interface -+*/ -+typedef struct EbiChipSelect { -+ uint32 base; /* base address in upper 24 bits */ -+#define EBI_SIZE_8K 0 -+#define EBI_SIZE_16K 1 -+#define EBI_SIZE_32K 2 -+#define EBI_SIZE_64K 3 -+#define EBI_SIZE_128K 4 -+#define EBI_SIZE_256K 5 -+#define EBI_SIZE_512K 6 -+#define EBI_SIZE_1M 7 -+#define EBI_SIZE_2M 8 -+#define EBI_SIZE_4M 9 -+#define EBI_SIZE_8M 10 -+#define EBI_SIZE_16M 11 -+#define EBI_SIZE_32M 12 -+#define EBI_SIZE_64M 13 -+#define EBI_SIZE_128M 14 -+#define EBI_SIZE_256M 15 -+ uint32 config; -+#define EBI_ENABLE 0x00000001 /* .. enable this range */ -+#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */ -+#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */ -+#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */ -+#define EBI_WREN 0x00000020 /* enable posted writes */ -+#define EBI_POLARITY 0x00000040 /* .. set to invert something, -+ ** don't know what yet */ -+#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */ -+#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */ -+#define EBI_FIFO 0x00000200 /* .. use fifo */ -+#define EBI_RE 0x00000400 /* .. Reverse Endian */ -+} EbiChipSelect; -+ -+typedef struct MpiRegisters { -+ EbiChipSelect cs[7]; /* size chip select configuration */ -+#define EBI_CS0_BASE 0 -+#define EBI_CS1_BASE 1 -+#define EBI_CS2_BASE 2 -+#define EBI_CS3_BASE 3 -+#define PCMCIA_COMMON_BASE 4 -+#define PCMCIA_ATTRIBUTE_BASE 5 -+#define PCMCIA_IO_BASE 6 -+ uint32 unused0[2]; /* reserved */ -+ uint32 ebi_control; /* ebi control */ -+ uint32 unused1[4]; /* reserved */ -+#define EBI_ACCESS_TIMEOUT 0x000007FF -+ uint32 pcmcia_cntl1; /* pcmcia control 1 */ -+#define PCCARD_CARD_RESET 0x00040000 -+#define CARDBUS_ENABLE 0x00008000 -+#define PCMCIA_ENABLE 0x00004000 -+#define PCMCIA_GPIO_ENABLE 0x00002000 -+#define CARDBUS_IDSEL 0x00001F00 -+#define VS2_OEN 0x00000080 -+#define VS1_OEN 0x00000040 -+#define VS2_OUT 0x00000020 -+#define VS1_OUT 0x00000010 -+#define VS2_IN 0x00000008 -+#define VS1_IN 0x00000004 -+#define CD2_IN 0x00000002 -+#define CD1_IN 0x00000001 -+#define VS_MASK 0x0000000C -+#define CD_MASK 0x00000003 -+ uint32 unused2; /* reserved */ -+ uint32 pcmcia_cntl2; /* pcmcia control 2 */ -+#define PCMCIA_BYTESWAP_DIS 0x00000002 -+#define PCMCIA_HALFWORD_EN 0x00000001 -+#define RW_ACTIVE_CNT_BIT 2 -+#define INACTIVE_CNT_BIT 8 -+#define CE_SETUP_CNT_BIT 16 -+#define CE_HOLD_CNT_BIT 24 -+ uint32 unused3[40]; /* reserved */ -+ -+ uint32 sp0range; /* PCI to internal system bus address space */ -+ uint32 sp0remap; -+ uint32 sp0cfg; -+ uint32 sp1range; -+ uint32 sp1remap; -+ uint32 sp1cfg; -+ -+ uint32 EndianCfg; -+ -+ uint32 l2pcfgctl; /* internal system bus to PCI IO/Cfg control */ -+#define DIR_CFG_SEL 0x80000000 /* change from PCI I/O access to PCI config access */ -+#define DIR_CFG_USEREG 0x40000000 /* use this register info for PCI configuration access */ -+#define DEVICE_NUMBER 0x00007C00 /* device number for the PCI configuration access */ -+#define FUNC_NUMBER 0x00000300 /* function number for the PCI configuration access */ -+#define REG_NUMBER 0x000000FC /* register number for the PCI configuration access */ -+#define CONFIG_TYPE 0x00000003 /* configuration type for the PCI configuration access */ -+ -+ uint32 l2pmrange1; /* internal system bus to PCI memory space */ -+#define PCI_SIZE_64K 0xFFFF0000 -+#define PCI_SIZE_128K 0xFFFE0000 -+#define PCI_SIZE_256K 0xFFFC0000 -+#define PCI_SIZE_512K 0xFFF80000 -+#define PCI_SIZE_1M 0xFFF00000 -+#define PCI_SIZE_2M 0xFFE00000 -+#define PCI_SIZE_4M 0xFFC00000 -+#define PCI_SIZE_8M 0xFF800000 -+#define PCI_SIZE_16M 0xFF000000 -+#define PCI_SIZE_32M 0xFE000000 -+ uint32 l2pmbase1; /* kseg0 or kseg1 address & 0x1FFFFFFF */ -+ uint32 l2pmremap1; -+#define CARDBUS_MEM 0x00000004 -+#define MEM_WINDOW_EN 0x00000001 -+ uint32 l2pmrange2; -+ uint32 l2pmbase2; -+ uint32 l2pmremap2; -+ uint32 l2piorange; /* internal system bus to PCI I/O space */ -+ uint32 l2piobase; -+ uint32 l2pioremap; -+ -+ uint32 pcimodesel; -+#define PCI2_INT_BUS_RD_PREFECH 0x000000F0 -+#define PCI_BAR2_NOSWAP 0x00000002 /* BAR at offset 0x20 */ -+#define PCI_BAR1_NOSWAP 0x00000001 /* BAR at affset 0x1c */ -+ -+ uint32 pciintstat; /* PCI interrupt mask/status */ -+#define MAILBOX1_SENT 0x08 -+#define MAILBOX0_SENT 0x04 -+#define MAILBOX1_MSG_RCV 0x02 -+#define MAILBOX0_MSG_RCV 0x01 -+ uint32 locbuscntrl; /* internal system bus control */ -+#define DIR_U2P_NOSWAP 0x00000002 -+#define EN_PCI_GPIO 0x00000001 -+ uint32 locintstat; /* internal system bus interrupt mask/status */ -+#define CSERR 0x0200 -+#define SERR 0x0100 -+#define EXT_PCI_INT 0x0080 -+#define DIR_FAILED 0x0040 -+#define DIR_COMPLETE 0x0020 -+#define PCI_CFG 0x0010 -+ uint32 unused5[7]; -+ -+ uint32 mailbox0; -+ uint32 mailbox1; -+ -+ uint32 pcicfgcntrl; /* internal system bus PCI configuration control */ -+#define PCI_CFG_REG_WRITE_EN 0x00000080 -+#define PCI_CFG_ADDR 0x0000003C -+ uint32 pcicfgdata; /* internal system bus PCI configuration data */ -+ -+ uint32 locch2ctl; /* PCI to interrnal system bus DMA (downstream) local control */ -+#define MPI_DMA_HALT 0x00000008 /* idle after finish current memory burst */ -+#define MPI_DMA_PKT_HALT 0x00000004 /* idle after an EOP flag is detected */ -+#define MPI_DMA_STALL 0x00000002 /* idle after an EOP flag is detected */ -+#define MPI_DMA_ENABLE 0x00000001 /* set to enable channel */ -+ uint32 locch2intStat; -+#define MPI_DMA_NO_DESC 0x00000004 /* no valid descriptors */ -+#define MPI_DMA_DONE 0x00000002 /* packet xfer complete */ -+#define MPI_DMA_BUFF_DONE 0x00000001 /* buffer done */ -+ uint32 locch2intMask; -+ uint32 unused6; -+ uint32 locch2descaddr; -+ uint32 locch2status1; -+#define LOCAL_DESC_STATE 0xE0000000 -+#define PCI_DESC_STATE 0x1C000000 -+#define BYTE_DONE 0x03FFC000 -+#define RING_ADDR 0x00003FFF -+ uint32 locch2status2; -+#define BUFPTR_OFFSET 0x1FFF0000 -+#define PCI_MASTER_STATE 0x000000C0 -+#define LOC_MASTER_STATE 0x00000038 -+#define CONTROL_STATE 0x00000007 -+ uint32 unused7; -+ -+ uint32 locch1Ctl; /*internal system bus to PCI DMA (upstream) local control */ -+#define DMA_U2P_LE 0x00000200 /* local bus is little endian */ -+#define DMA_U2P_NOSWAP 0x00000100 /* lccal bus is little endian but no data swapped */ -+ uint32 locch1intstat; -+ uint32 locch1intmask; -+ uint32 unused8; -+ uint32 locch1descaddr; -+ uint32 locch1status1; -+ uint32 locch1status2; -+ uint32 unused9; -+ -+ uint32 pcich1ctl; /* internal system bus to PCI DMA PCI control */ -+ uint32 pcich1intstat; -+ uint32 pcich1intmask; -+ uint32 pcich1descaddr; -+ uint32 pcich1status1; -+ uint32 pcich1status2; -+ -+ uint32 pcich2Ctl; /* PCI to internal system bus DMA PCI control */ -+ uint32 pcich2intstat; -+ uint32 pcich2intmask; -+ uint32 pcich2descaddr; -+ uint32 pcich2status1; -+ uint32 pcich2status2; -+ -+ uint32 perm_id; /* permanent device and vendor id */ -+ uint32 perm_rev; /* permanent revision id */ -+} MpiRegisters; -+ -+#define MPI ((volatile MpiRegisters * const) MPI_BASE) -+ -+/* PCI configuration address space start offset 0x40 */ -+#define BRCM_PCI_CONFIG_TIMER 0x40 -+#define BRCM_PCI_CONFIG_TIMER_RETRY_MASK 0x0000FF00 -+#define BRCM_PCI_CONFIG_TIMER_TRDY_MASK 0x000000FF -+ -+/* USB host non-Open HCI register, USB_HOST_NON_OHCI, bit definitions. */ -+#define NON_OHCI_ENABLE_PORT1 0x00000001 /* Use USB port 1 for host, not dev */ -+#define NON_OHCI_BYTE_SWAP 0x00000008 /* Swap USB host registers */ -+ -+#define USBH_NON_OHCI ((volatile unsigned long * const) USB_HOST_NON_OHCI) -+ -+#endif -+ -diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/bcm_intr.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcm_intr.h ---- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/bcm_intr.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcm_intr.h 2006-08-03 16:42:38.000000000 +0200 -@@ -0,0 +1,59 @@ -+/* -+<:copyright-gpl -+ Copyright 2003 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+#ifndef __BCM_INTR_H -+#define __BCM_INTR_H -+ -+#ifdef __cplusplus -+ extern "C" { -+#endif -+ -+#if defined(CONFIG_BCM96338) -+#include <6338_intr.h> -+#endif -+#if defined(CONFIG_BCM96345) -+#include <6345_intr.h> -+#endif -+#if defined(CONFIG_BCM96348) -+#include <6348_intr.h> -+#endif -+ -+/* defines */ -+struct pt_regs; -+typedef int (*FN_HANDLER) (int, void *, struct pt_regs *); -+ -+/* prototypes */ -+extern void enable_brcm_irq(unsigned int irq); -+extern void disable_brcm_irq(unsigned int irq); -+extern int request_external_irq(unsigned int irq, -+ FN_HANDLER handler, unsigned long irqflags, -+ const char * devname, void *dev_id); -+extern unsigned int BcmHalMapInterrupt(FN_HANDLER isr, unsigned int param, -+ unsigned int interruptId); -+extern void dump_intr_regs(void); -+ -+/* compatibility definitions */ -+#define BcmHalInterruptEnable(irq) enable_brcm_irq( irq ) -+#define BcmHalInterruptDisable(irq) disable_brcm_irq( irq ) -+ -+#ifdef __cplusplus -+ } -+#endif -+ -+#endif -diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/bcm_map_part.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcm_map_part.h ---- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/bcm_map_part.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcm_map_part.h 2006-08-03 16:42:38.000000000 +0200 -@@ -0,0 +1,34 @@ -+/* -+<:copyright-gpl -+ Copyright 2004 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+#ifndef __BCM_MAP_PART_H -+#define __BCM_MAP_PART_H -+ -+#if defined(CONFIG_BCM96338) -+#include <6338_map_part.h> -+#endif -+#if defined(CONFIG_BCM96345) -+#include <6345_map_part.h> -+#endif -+#if defined(CONFIG_BCM96348) -+#include <6348_map_part.h> -+#endif -+ -+#endif -+ -diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/bcmpci.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcmpci.h ---- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/bcmpci.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcmpci.h 2006-08-03 16:42:38.000000000 +0200 -@@ -0,0 +1,87 @@ -+/* -+<:copyright-gpl -+ Copyright 2004 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+// -+// bcmpci.h - bcm96348 PCI, Cardbus, and PCMCIA definition -+// -+#ifndef BCMPCI_H -+#define BCMPCI_H -+ -+/* Memory window in internal system bus address space */ -+#define BCM_PCI_MEM_BASE 0x08000000 -+/* IO window in internal system bus address space */ -+#define BCM_PCI_IO_BASE 0x0C000000 -+ -+#define BCM_PCI_ADDR_MASK 0x1fffffff -+ -+/* Memory window size (range) */ -+#define BCM_PCI_MEM_SIZE_16MB 0x01000000 -+/* IO window size (range) */ -+#define BCM_PCI_IO_SIZE_64KB 0x00010000 -+ -+/* PCI Configuration and I/O space acesss */ -+#define BCM_PCI_CFG(d, f, o) ( (d << 11) | (f << 8) | (o/4 << 2) ) -+ -+/* fake USB PCI slot */ -+#define USB_HOST_SLOT 9 -+#define USB_BAR0_MEM_SIZE 0x0800 -+ -+#define BCM_HOST_MEM_SPACE1 0x10000000 -+#define BCM_HOST_MEM_SPACE2 0x00000000 -+ -+/* -+ * EBI bus clock is 33MHz and share with PCI bus -+ * each clock cycle is 30ns. -+ */ -+/* attribute memory access wait cnt for 4306 */ -+#define PCMCIA_ATTR_CE_HOLD 3 // data hold time 70ns -+#define PCMCIA_ATTR_CE_SETUP 3 // data setup time 50ns -+#define PCMCIA_ATTR_INACTIVE 6 // time between read/write cycles 180ns. For the total cycle time 600ns (cnt1+cnt2+cnt3+cnt4) -+#define PCMCIA_ATTR_ACTIVE 10 // OE/WE pulse width 300ns -+ -+/* common memory access wait cnt for 4306 */ -+#define PCMCIA_MEM_CE_HOLD 1 // data hold time 30ns -+#define PCMCIA_MEM_CE_SETUP 1 // data setup time 30ns -+#define PCMCIA_MEM_INACTIVE 2 // time between read/write cycles 40ns. For the total cycle time 250ns (cnt1+cnt2+cnt3+cnt4) -+#define PCMCIA_MEM_ACTIVE 5 // OE/WE pulse width 150ns -+ -+#define PCCARD_VCC_MASK 0x00070000 // Mask Reset also -+#define PCCARD_VCC_33V 0x00010000 -+#define PCCARD_VCC_50V 0x00020000 -+ -+typedef enum { -+ MPI_CARDTYPE_NONE, // No Card in slot -+ MPI_CARDTYPE_PCMCIA, // 16-bit PCMCIA card in slot -+ MPI_CARDTYPE_CARDBUS, // 32-bit CardBus card in slot -+} CardType; -+ -+#define CARDBUS_SLOT 0 // Slot 0 is default for CardBus -+ -+#define pcmciaAttrOffset 0x00200000 -+#define pcmciaMemOffset 0x00000000 -+// Needs to be right above PCI I/O space. Give 0x8000 (32K) to PCMCIA. -+#define pcmciaIoOffset (BCM_PCI_IO_BASE + 0x80000) -+// Base Address is that mapped into the MPI ChipSelect registers. -+// UBUS bridge MemoryWindow 0 outputs a 0x00 for the base. -+#define pcmciaBase 0xbf000000 -+#define pcmciaAttr (pcmciaAttrOffset | pcmciaBase) -+#define pcmciaMem (pcmciaMemOffset | pcmciaBase) -+#define pcmciaIo (pcmciaIoOffset | pcmciaBase) -+ -+#endif -diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/bcmTag.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcmTag.h ---- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/bcmTag.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcmTag.h 2006-08-03 16:42:38.000000000 +0200 -@@ -0,0 +1,153 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+//************************************************************************************** -+// File Name : bcmTag.h -+// -+// Description: add tag with validation system to the firmware image file to be uploaded -+// via http -+// -+// Created : 02/28/2002 seanl -+//************************************************************************************** -+ -+#ifndef _BCMTAG_H_ -+#define _BCMTAG_H_ -+ -+ -+#define BCM_SIG_1 "Broadcom Corporation" -+#define BCM_SIG_2 "ver. 2.0" // was "firmware version 2.0" now it is split 6 char out for chip id. -+ -+#define BCM_TAG_VER "6" -+#define BCM_TAG_VER_LAST "26" -+ -+// file tag (head) structure all is in clear text except validationTokens (crc, md5, sha1, etc). Total: 128 unsigned chars -+#define TAG_LEN 256 -+#define TAG_VER_LEN 4 -+#define SIG_LEN 20 -+#define SIG_LEN_2 14 // Original second SIG = 20 is now devided into 14 for SIG_LEN_2 and 6 for CHIP_ID -+#define CHIP_ID_LEN 6 -+#define IMAGE_LEN 10 -+#define ADDRESS_LEN 12 -+#define FLAG_LEN 2 -+#define TOKEN_LEN 20 -+#define BOARD_ID_LEN 16 -+#define RESERVED_LEN (TAG_LEN - TAG_VER_LEN - SIG_LEN - SIG_LEN_2 - CHIP_ID_LEN - BOARD_ID_LEN - \ -+ (4*IMAGE_LEN) - (3*ADDRESS_LEN) - (3*FLAG_LEN) - (2*TOKEN_LEN)) -+ -+ -+// TAG for downloadable image (kernel plus file system) -+typedef struct _FILE_TAG -+{ -+ unsigned char tagVersion[TAG_VER_LEN]; // tag version. Will be 2 here. -+ unsigned char signiture_1[SIG_LEN]; // text line for company info -+ unsigned char signiture_2[SIG_LEN_2]; // additional info (can be version number) -+ unsigned char chipId[CHIP_ID_LEN]; // chip id -+ unsigned char boardId[BOARD_ID_LEN]; // board id -+ unsigned char bigEndian[FLAG_LEN]; // if = 1 - big, = 0 - little endia of the host -+ unsigned char totalImageLen[IMAGE_LEN]; // the sum of all the following length -+ unsigned char cfeAddress[ADDRESS_LEN]; // if non zero, cfe starting address -+ unsigned char cfeLen[IMAGE_LEN]; // if non zero, cfe size in clear ASCII text. -+ unsigned char rootfsAddress[ADDRESS_LEN]; // if non zero, filesystem starting address -+ unsigned char rootfsLen[IMAGE_LEN]; // if non zero, filesystem size in clear ASCII text. -+ unsigned char kernelAddress[ADDRESS_LEN]; // if non zero, kernel starting address -+ unsigned char kernelLen[IMAGE_LEN]; // if non zero, kernel size in clear ASCII text. -+ unsigned char dualImage[FLAG_LEN]; // if 1, dual image -+ unsigned char inactiveLen[FLAG_LEN]; // if 1, the image is INACTIVE; if 0, active -+ unsigned char reserved[RESERVED_LEN]; // reserved for later use -+ unsigned char imageValidationToken[TOKEN_LEN];// image validation token - can be crc, md5, sha; for -+ // now will be 4 unsigned char crc -+ unsigned char tagValidationToken[TOKEN_LEN]; // validation token for tag(from signiture_1 to end of // mageValidationToken) -+} FILE_TAG, *PFILE_TAG; -+ -+#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */ -+#define CRC_LEN 4 -+ -+// only included if for bcmTag.exe program -+#ifdef BCMTAG_EXE_USE -+ -+static unsigned long Crc32_table[256] = { -+ 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA, -+ 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3, -+ 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988, -+ 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91, -+ 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE, -+ 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7, -+ 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC, -+ 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5, -+ 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172, -+ 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B, -+ 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940, -+ 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59, -+ 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116, -+ 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F, -+ 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924, -+ 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D, -+ 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A, -+ 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433, -+ 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818, -+ 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01, -+ 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E, -+ 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457, -+ 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C, -+ 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65, -+ 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2, -+ 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB, -+ 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0, -+ 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9, -+ 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086, -+ 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F, -+ 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4, -+ 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD, -+ 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A, -+ 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683, -+ 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8, -+ 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1, -+ 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE, -+ 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7, -+ 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC, -+ 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5, -+ 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252, -+ 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B, -+ 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60, -+ 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79, -+ 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236, -+ 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F, -+ 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04, -+ 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D, -+ 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A, -+ 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713, -+ 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38, -+ 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21, -+ 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E, -+ 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777, -+ 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C, -+ 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45, -+ 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2, -+ 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB, -+ 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0, -+ 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9, -+ 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6, -+ 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF, -+ 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94, -+ 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D -+}; -+#endif // BCMTAG_USE -+ -+ -+#endif // _BCMTAG_H_ -+ -diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/bcmtypes.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcmtypes.h ---- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/bcmtypes.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/bcmtypes.h 2006-08-03 16:42:38.000000000 +0200 -@@ -0,0 +1,163 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+ -+// -+// bcmtypes.h - misc useful typedefs -+// -+#ifndef BCMTYPES_H -+#define BCMTYPES_H -+ -+// These are also defined in typedefs.h in the application area, so I need to -+// protect against re-definition. -+ -+#ifndef _TYPEDEFS_H_ -+typedef unsigned char uint8; -+typedef unsigned short uint16; -+typedef unsigned long uint32; -+typedef signed char int8; -+typedef signed short int16; -+typedef signed long int32; -+#if !defined(__cplusplus) -+typedef int bool; -+#endif -+#endif -+ -+typedef unsigned char byte; -+// typedef unsigned long sem_t; -+ -+typedef unsigned long HANDLE,*PULONG,DWORD,*PDWORD; -+typedef signed long LONG,*PLONG; -+ -+typedef unsigned int *PUINT; -+typedef signed int INT; -+ -+typedef unsigned short *PUSHORT; -+typedef signed short SHORT,*PSHORT; -+typedef unsigned short WORD,*PWORD; -+ -+typedef unsigned char *PUCHAR; -+typedef signed char *PCHAR; -+ -+typedef void *PVOID; -+ -+typedef unsigned char BOOLEAN, *PBOOL, *PBOOLEAN; -+ -+typedef unsigned char BYTE,*PBYTE; -+ -+//#ifndef __GNUC__ -+//The following has been defined in Vxworks internally: vxTypesOld.h -+//redefine under vxworks will cause error -+typedef signed int *PINT; -+ -+typedef signed char INT8; -+typedef signed short INT16; -+typedef signed long INT32; -+ -+typedef unsigned char UINT8; -+typedef unsigned short UINT16; -+typedef unsigned long UINT32; -+ -+typedef unsigned char UCHAR; -+typedef unsigned short USHORT; -+typedef unsigned int UINT; -+typedef unsigned long ULONG; -+ -+typedef void VOID; -+typedef unsigned char BOOL; -+ -+//#endif /* __GNUC__ */ -+ -+ -+// These are also defined in typedefs.h in the application area, so I need to -+// protect against re-definition. -+#ifndef TYPEDEFS_H -+ -+// Maximum and minimum values for a signed 16 bit integer. -+#define MAX_INT16 32767 -+#define MIN_INT16 -32768 -+ -+// Useful for true/false return values. This uses the -+// Taligent notation (k for constant). -+typedef enum -+{ -+ kFalse = 0, -+ kTrue = 1 -+} Bool; -+ -+#endif -+ -+/* macros to protect against unaligned accesses */ -+ -+#if 0 -+/* first arg is an address, second is a value */ -+#define PUT16( a, d ) { \ -+ *((byte *)a) = (byte)((d)>>8); \ -+ *(((byte *)a)+1) = (byte)(d); \ -+} -+ -+#define PUT32( a, d ) { \ -+ *((byte *)a) = (byte)((d)>>24); \ -+ *(((byte *)a)+1) = (byte)((d)>>16); \ -+ *(((byte *)a)+2) = (byte)((d)>>8); \ -+ *(((byte *)a)+3) = (byte)(d); \ -+} -+ -+/* first arg is an address, returns a value */ -+#define GET16( a ) ( \ -+ (*((byte *)a) << 8) | \ -+ (*(((byte *)a)+1)) \ -+) -+ -+#define GET32( a ) ( \ -+ (*((byte *)a) << 24) | \ -+ (*(((byte *)a)+1) << 16) | \ -+ (*(((byte *)a)+2) << 8) | \ -+ (*(((byte *)a)+3)) \ -+) -+#endif -+ -+#ifndef YES -+#define YES 1 -+#endif -+ -+#ifndef NO -+#define NO 0 -+#endif -+ -+#ifndef IN -+#define IN -+#endif -+ -+#ifndef OUT -+#define OUT -+#endif -+ -+#ifndef TRUE -+#define TRUE 1 -+#endif -+ -+#ifndef FALSE -+#define FALSE 0 -+#endif -+ -+#define READ32(addr) (*(volatile UINT32 *)((ULONG)&addr)) -+#define READ16(addr) (*(volatile UINT16 *)((ULONG)&addr)) -+#define READ8(addr) (*(volatile UINT8 *)((ULONG)&addr)) -+ -+#endif -diff -urN linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/board.h linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/board.h ---- linux-2.6.17/bcmdrivers/opensource/include/bcm963xx/board.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/include/bcm963xx/board.h 2006-08-03 16:42:46.000000000 +0200 -@@ -0,0 +1,374 @@ -+/* -+<:copyright-gpl -+ Copyright 2002 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+:> -+*/ -+/***********************************************************************/ -+/* */ -+/* MODULE: board.h */ -+/* DATE: 97/02/18 */ -+/* PURPOSE: Board specific information. This module should include */ -+/* all base device addresses and board specific macros. */ -+/* */ -+/***********************************************************************/ -+#ifndef _BOARD_H -+#define _BOARD_H -+ -+/*****************************************************************************/ -+/* Misc board definitions */ -+/*****************************************************************************/ -+ -+#define DYING_GASP_API -+ -+/*****************************************************************************/ -+/* Physical Memory Map */ -+/*****************************************************************************/ -+ -+#define PHYS_DRAM_BASE 0x00000000 /* Dynamic RAM Base */ -+#define PHYS_FLASH_BASE 0x1FC00000 /* Flash Memory */ -+ -+/*****************************************************************************/ -+/* Note that the addresses above are physical addresses and that programs */ -+/* have to use converted addresses defined below: */ -+/*****************************************************************************/ -+#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */ -+#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */ -+#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */ -+ -+/*****************************************************************************/ -+/* Select the PLL value to get the desired CPU clock frequency. */ -+/* */ -+/* */ -+/*****************************************************************************/ -+#define FPERIPH 50000000 -+ -+#define ONEK 1024 -+#define BLK64K (64*ONEK) -+#define FLASH45_BLKS_BOOT_ROM 1 -+#define FLASH45_LENGTH_BOOT_ROM (FLASH45_BLKS_BOOT_ROM * BLK64K) -+#define FLASH_RESERVED_AT_END (64*ONEK) /*reserved for PSI, scratch pad*/ -+ -+/*****************************************************************************/ -+/* Note that the addresses above are physical addresses and that programs */ -+/* have to use converted addresses defined below: */ -+/*****************************************************************************/ -+#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */ -+#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */ -+#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */ -+ -+/*****************************************************************************/ -+/* Select the PLL value to get the desired CPU clock frequency. */ -+/* */ -+/* */ -+/*****************************************************************************/ -+#define FPERIPH 50000000 -+ -+#define SDRAM_TYPE_ADDRESS_OFFSET 16 -+#define NVRAM_DATA_OFFSET 0x0580 -+#define NVRAM_DATA_ID 0x0f1e2d3c -+#define BOARD_SDRAM_TYPE *(unsigned long *) \ -+ (FLASH_BASE + SDRAM_TYPE_ADDRESS_OFFSET) -+ -+#define ONEK 1024 -+#define BLK64K (64*ONEK) -+ -+// nvram and psi flash definitions for 45 -+#define FLASH45_LENGTH_NVRAM ONEK // 1k nvram -+#define NVRAM_PSI_DEFAULT 24 // default psi in K byes -+ -+/*****************************************************************************/ -+/* NVRAM Offset and definition */ -+/*****************************************************************************/ -+ -+#define NVRAM_VERSION_NUMBER 2 -+#define NVRAM_VERSION_NUMBER_ADDRESS 0 -+ -+#define NVRAM_BOOTLINE_LEN 256 -+#define NVRAM_BOARD_ID_STRING_LEN 16 -+#define NVRAM_MAC_ADDRESS_LEN 6 -+#define NVRAM_MAC_COUNT_MAX 32 -+ -+/*****************************************************************************/ -+/* Misc Offsets */ -+/*****************************************************************************/ -+ -+#define CFE_VERSION_OFFSET 0x0570 -+#define CFE_VERSION_MARK_SIZE 5 -+#define CFE_VERSION_SIZE 5 -+ -+typedef struct -+{ -+ unsigned long ulVersion; -+ char szBootline[NVRAM_BOOTLINE_LEN]; -+ char szBoardId[NVRAM_BOARD_ID_STRING_LEN]; -+ unsigned long ulReserved1[2]; -+ unsigned long ulNumMacAddrs; -+ unsigned char ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN]; -+ char chReserved[2]; -+ unsigned long ulCheckSum; -+} NVRAM_DATA, *PNVRAM_DATA; -+ -+ -+/*****************************************************************************/ -+/* board ioctl calls for flash, led and some other utilities */ -+/*****************************************************************************/ -+ -+ -+/* Defines. for board driver */ -+#define BOARD_IOCTL_MAGIC 'B' -+#define BOARD_DRV_MAJOR 206 -+ -+#define MAC_ADDRESS_ANY (unsigned long) -1 -+ -+#define BOARD_IOCTL_FLASH_INIT \ -+ _IOWR(BOARD_IOCTL_MAGIC, 0, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_FLASH_WRITE \ -+ _IOWR(BOARD_IOCTL_MAGIC, 1, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_FLASH_READ \ -+ _IOWR(BOARD_IOCTL_MAGIC, 2, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_NR_PAGES \ -+ _IOWR(BOARD_IOCTL_MAGIC, 3, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_DUMP_ADDR \ -+ _IOWR(BOARD_IOCTL_MAGIC, 4, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_SET_MEMORY \ -+ _IOWR(BOARD_IOCTL_MAGIC, 5, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_MIPS_SOFT_RESET \ -+ _IOWR(BOARD_IOCTL_MAGIC, 6, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_LED_CTRL \ -+ _IOWR(BOARD_IOCTL_MAGIC, 7, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_ID \ -+ _IOWR(BOARD_IOCTL_MAGIC, 8, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_MAC_ADDRESS \ -+ _IOWR(BOARD_IOCTL_MAGIC, 9, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_RELEASE_MAC_ADDRESS \ -+ _IOWR(BOARD_IOCTL_MAGIC, 10, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_PSI_SIZE \ -+ _IOWR(BOARD_IOCTL_MAGIC, 11, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_SDRAM_SIZE \ -+ _IOWR(BOARD_IOCTL_MAGIC, 12, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_SET_MONITOR_FD \ -+ _IOWR(BOARD_IOCTL_MAGIC, 13, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_WAKEUP_MONITOR_TASK \ -+ _IOWR(BOARD_IOCTL_MAGIC, 14, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_BOOTLINE \ -+ _IOWR(BOARD_IOCTL_MAGIC, 15, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_SET_BOOTLINE \ -+ _IOWR(BOARD_IOCTL_MAGIC, 16, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_BASE_MAC_ADDRESS \ -+ _IOWR(BOARD_IOCTL_MAGIC, 17, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_CHIP_ID \ -+ _IOWR(BOARD_IOCTL_MAGIC, 18, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_NUM_ENET \ -+ _IOWR(BOARD_IOCTL_MAGIC, 19, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_CFE_VER \ -+ _IOWR(BOARD_IOCTL_MAGIC, 20, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_ENET_CFG \ -+ _IOWR(BOARD_IOCTL_MAGIC, 21, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_WLAN_ANT_INUSE \ -+ _IOWR(BOARD_IOCTL_MAGIC, 22, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_SET_TRIGGER_EVENT \ -+ _IOWR(BOARD_IOCTL_MAGIC, 23, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_GET_TRIGGER_EVENT \ -+ _IOWR(BOARD_IOCTL_MAGIC, 24, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_UNSET_TRIGGER_EVENT \ -+ _IOWR(BOARD_IOCTL_MAGIC, 25, BOARD_IOCTL_PARMS) -+ -+#define BOARD_IOCTL_SET_SES_LED \ -+ _IOWR(BOARD_IOCTL_MAGIC, 26, BOARD_IOCTL_PARMS) -+ -+//<>JUNHON, 2004/09/15 -+ -+// for the action in BOARD_IOCTL_PARMS for flash operation -+typedef enum -+{ -+ PERSISTENT, -+ NVRAM, -+ BCM_IMAGE_CFE, -+ BCM_IMAGE_FS, -+ BCM_IMAGE_KERNEL, -+ BCM_IMAGE_WHOLE, -+ SCRATCH_PAD, -+ FLASH_SIZE, -+} BOARD_IOCTL_ACTION; -+ -+ -+typedef struct boardIoctParms -+{ -+ char *string; -+ char *buf; -+ int strLen; -+ int offset; -+ BOARD_IOCTL_ACTION action; /* flash read/write: nvram, persistent, bcm image */ -+ int result; -+} BOARD_IOCTL_PARMS; -+ -+ -+// LED defines -+typedef enum -+{ -+ kLedAdsl, -+ kLedWireless, -+ kLedUsb, -+ kLedHpna, -+ kLedWanData, -+ kLedPPP, -+ kLedVoip, -+ kLedSes, -+ kLedLan, -+ kLedSelfTest, -+ kLedEnd, // NOTE: Insert the new led name before this one. Alway stay at the end. -+} BOARD_LED_NAME; -+ -+typedef enum -+{ -+ kLedStateOff, /* turn led off */ -+ kLedStateOn, /* turn led on */ -+ kLedStateFail, /* turn led on red */ -+ kLedStateBlinkOnce, /* blink once, ~100ms and ignore the same call during the 100ms period */ -+ kLedStateSlowBlinkContinues, /* slow blink continues at ~600ms interval */ -+ kLedStateFastBlinkContinues, /* fast blink continues at ~200ms interval */ -+} BOARD_LED_STATE; -+ -+ -+// virtual and physical map pair defined in board.c -+typedef struct ledmappair -+{ -+ BOARD_LED_NAME ledName; // virtual led name -+ BOARD_LED_STATE ledInitState; // initial led state when the board boots. -+ unsigned short ledMask; // physical GPIO pin mask -+ unsigned short ledActiveLow; // reset bit to turn on LED -+ unsigned short ledMaskFail; // physical GPIO pin mask for state failure -+ unsigned short ledActiveLowFail;// reset bit to turn on LED -+} LED_MAP_PAIR, *PLED_MAP_PAIR; -+ -+typedef void (*HANDLE_LED_FUNC)(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState); -+ -+/* Flash storage address information that is determined by the flash driver. */ -+typedef struct flashaddrinfo -+{ -+ int flash_persistent_start_blk; -+ int flash_persistent_number_blk; -+ int flash_persistent_length; -+ unsigned long flash_persistent_blk_offset; -+ int flash_scratch_pad_start_blk; // start before psi (SP_BUF_LEN) -+ int flash_scratch_pad_number_blk; -+ int flash_scratch_pad_length; -+ unsigned long flash_scratch_pad_blk_offset; -+ int flash_nvram_start_blk; -+ int flash_nvram_number_blk; -+ int flash_nvram_length; -+ unsigned long flash_nvram_blk_offset; -+} FLASH_ADDR_INFO, *PFLASH_ADDR_INFO; -+ -+// scratch pad defines -+/* SP - Persisten Scratch Pad format: -+ sp header : 32 bytes -+ tokenId-1 : 8 bytes -+ tokenId-1 len : 4 bytes -+ tokenId-1 data -+ .... -+ tokenId-n : 8 bytes -+ tokenId-n len : 4 bytes -+ tokenId-n data -+*/ -+ -+#define MAGIC_NUM_LEN 8 -+#define MAGIC_NUMBER "gOGoBrCm" -+#define TOKEN_NAME_LEN 16 -+#define SP_VERSION 1 -+#define SP_MAX_LEN 8 * 1024 // 8k buf before psi -+#define SP_RESERVERD 16 -+ -+typedef struct _SP_HEADER -+{ -+ char SPMagicNum[MAGIC_NUM_LEN]; // 8 bytes of magic number -+ int SPVersion; // version number -+ int SPUsedLen; // used sp len -+ char SPReserved[SP_RESERVERD]; // reservied, total 32 bytes -+} SP_HEADER, *PSP_HEADER; -+ -+typedef struct _TOKEN_DEF -+{ -+ char tokenName[TOKEN_NAME_LEN]; -+ int tokenLen; -+} SP_TOKEN, *PSP_TOKEN; -+ -+ -+/*****************************************************************************/ -+/* Function Prototypes */ -+/*****************************************************************************/ -+#if !defined(__ASM_ASM_H) -+void dumpaddr( unsigned char *pAddr, int nLen ); -+ -+void kerSysFlashAddrInfoGet(PFLASH_ADDR_INFO pflash_addr_info); -+int kerSysNvRamGet(char *string, int strLen, int offset); -+int kerSysNvRamSet(char *string, int strLen, int offset); -+int kerSysPersistentGet(char *string, int strLen, int offset); -+int kerSysPersistentSet(char *string, int strLen, int offset); -+int kerSysScratchPadGet(char *tokName, char *tokBuf, int tokLen); -+int kerSysScratchPadSet(char *tokName, char *tokBuf, int tokLen); -+int kerSysBcmImageSet( int flash_start_addr, char *string, int size); -+int kerSysGetMacAddress( unsigned char *pucaAddr, unsigned long ulId ); -+int kerSysReleaseMacAddress( unsigned char *pucaAddr ); -+int kerSysGetSdramSize( void ); -+void kerSysGetBootline(char *string, int strLen); -+void kerSysSetBootline(char *string, int strLen); -+void kerSysMipsSoftReset(void); -+void kerSysLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE); -+void kerSysLedRegisterHwHandler( BOARD_LED_NAME, HANDLE_LED_FUNC, int ); -+int kerSysFlashSizeGet(void); -+void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context); -+void kerSysDeregisterDyingGaspHandler(char *devname); -+void kerSysWakeupMonitorTask( void ); -+#endif -+ -+#define BOOT_CFE 0 -+#define BOOT_REDBOOT 1 -+ -+extern int boot_loader_type; -+ -+#endif /* _BOARD_H */ -+ -diff -urN linux-2.6.17/bcmdrivers/opensource/Makefile linux-2.6.17-brcm63xx/bcmdrivers/opensource/Makefile ---- linux-2.6.17/bcmdrivers/opensource/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.17-brcm63xx/bcmdrivers/opensource/Makefile 2006-08-03 16:42:38.000000000 +0200 -@@ -0,0 +1,20 @@ -+# File: modules/drivers/Makefile -+# -+# Makefile for the GPLed Linux kernel modules. -+# -+ -+LN_NAME=bcm9$(BRCM_CHIP) -+LN_DRIVER_DIRS = -+ -+-include $(KERNEL_DIR)/.config -+ -+ifneq ($(CONFIG_BCM_SERIAL),) -+ LN_DRIVER_DIRS +=ln -sn impl$(CONFIG_BCM_SERIAL_IMPL) char/serial/$(LN_NAME); -+endif -+ -+obj-$(CONFIG_BCM_SERIAL) += char/serial/impl$(CONFIG_BCM_SERIAL_IMPL)/ -+ -+ -+symlinks: -+ find . -lname "*" -name "$(LN_NAME)" -print -exec rm -f "{}" ";" -+ $(CONFIG_SHELL) -c "$(LN_DRIVER_DIRS)" diff --git a/openwrt/target/linux/brcm63xx-2.6/patches/030-boardparms.patch b/openwrt/target/linux/brcm63xx-2.6/patches/030-boardparms.patch deleted file mode 100644 index f6ce12ce34..0000000000 --- a/openwrt/target/linux/brcm63xx-2.6/patches/030-boardparms.patch +++ /dev/null @@ -1,3186 +0,0 @@ -diff -Naurp linux-2.6.16.7-generic-patched/boardparms/bcm963xx/Makefile linux-2.6.16.7-patched/boardparms/bcm963xx/Makefile ---- linux-2.6.16.7-generic-patched/boardparms/bcm963xx/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.16.7-patched/boardparms/bcm963xx/Makefile 2006-07-05 15:21:58.000000000 +0200 -@@ -0,0 +1,16 @@ -+ -+ifeq ($(CONFIG_MIPS_BRCM),y) -+ -+# Linux -+obj-y += boardparms.o -+EXTRA_CFLAGS += -DCONFIG_BCM9$(BRCM_CHIP) -+-include $(TOPDIR)/Rules.make -+ -+else -+ -+# CFE -+BSPOBJS += boardparms.o -+ -+endif -+ -+ -diff -Naurp linux-2.6.16.7-generic-patched/boardparms/bcm963xx/boardparms.c linux-2.6.16.7-patched/boardparms/bcm963xx/boardparms.c ---- linux-2.6.16.7-generic-patched/boardparms/bcm963xx/boardparms.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.16.7-patched/boardparms/bcm963xx/boardparms.c 2006-07-05 15:21:58.000000000 +0200 -@@ -0,0 +1,2392 @@ -+/* -+<:copyright-gpl -+ -+ Copyright 2003 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+ -+:> -+*/ -+/************************************************************************** -+ * File Name : boardparms.c -+ * -+ * Description: This file contains the implementation for the BCM63xx board -+ * parameter access functions. -+ * -+ * Updates : 07/14/2003 Created. -+ ***************************************************************************/ -+ -+/* Includes. */ -+#include -+#include "boardparms.h" -+ -+/* Defines. */ -+ -+/* Default psi size in K bytes */ -+#define BP_PSI_DEFAULT_SIZE 24 -+ -+/* Typedefs */ -+typedef struct boardparameters -+{ -+ char szBoardId[BP_BOARD_ID_LEN]; /* board id string */ -+ ETHERNET_MAC_INFO EnetMacInfos[BP_MAX_ENET_MACS]; -+ VOIP_DSP_INFO VoIPDspInfo[BP_MAX_VOIP_DSP]; -+ unsigned short usSdramSize; /* SDRAM size and type */ -+ unsigned short usPsiSize; /* persistent storage in K bytes */ -+ unsigned short usGpioRj11InnerPair; /* GPIO pin or not defined */ -+ unsigned short usGpioRj11OuterPair; /* GPIO pin or not defined */ -+ unsigned short usGpioPressAndHoldReset; /* GPIO pin or not defined */ -+ unsigned short usGpioPcmciaReset; /* GPIO pin or not defined */ -+ unsigned short usGpioUartRts; /* GPIO pin or not defined */ -+ unsigned short usGpioUartCts; /* GPIO pin or not defined */ -+ unsigned short usGpioLedAdsl; /* GPIO pin or not defined */ -+ unsigned short usGpioLedAdslFail; /* GPIO pin or not defined */ -+ unsigned short usGpioLedWireless; /* GPIO pin or not defined */ -+ unsigned short usGpioLedUsb; /* GPIO pin or not defined */ -+ unsigned short usGpioLedHpna; /* GPIO pin or not defined */ -+ unsigned short usGpioLedWanData; /* GPIO pin or not defined */ -+ unsigned short usGpioLedPpp; /* GPIO pin or not defined */ -+ unsigned short usGpioLedPppFail; /* GPIO pin or not defined */ -+ unsigned short usGpioLedBlPowerOn; /* GPIO pin or not defined */ -+ unsigned short usGpioLedBlAlarm; /* GPIO pin or not defined */ -+ unsigned short usGpioLedBlResetCfg; /* GPIO pin or not defined */ -+ unsigned short usGpioLedBlStop; /* GPIO pin or not defined */ -+ unsigned short usExtIntrWireless; /* ext intr or not defined */ -+ unsigned short usExtIntrAdslDyingGasp; /* ext intr or not defined */ -+ unsigned short usExtIntrHpna; /* ext intr or not defined */ -+ unsigned short usCsHpna; /* chip select not defined */ -+ unsigned short usAntInUseWireless; /* antenna in use or not defined */ -+ unsigned short usGpioSesBtnWireless; /* GPIO pin or not defined */ -+ unsigned short usExtIntrSesBtnWireless; /* ext intr or not defined */ -+ unsigned short usGpioLedSesWireless; /* GPIO pin or not defined */ -+} BOARD_PARAMETERS, *PBOARD_PARAMETERS; -+ -+/* Variables */ -+#if defined(_BCM96338_) || defined(CONFIG_BCM96338) -+static BOARD_PARAMETERS g_bcm96338sv = -+{ -+ "96338SV", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_NOT_DEFINED, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_NOT_DEFINED, /* usGpioLedWanData */ -+ BP_NOT_DEFINED, /* usGpioLedPpp */ -+ BP_NOT_DEFINED, /* usGpioLedPppFail */ -+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */ -+ BP_NOT_DEFINED, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+static BOARD_PARAMETERS g_bcm96338l2m8m = -+{ -+ "96338L-2M-8M", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_GPIO_2_AL, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_3_AL, /* usGpioLedWanData */ -+ BP_GPIO_3_AL, /* usGpioLedPpp */ -+ BP_GPIO_4_AL, /* usGpioLedPppFail */ -+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ -+ BP_GPIO_1_AL, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+static PBOARD_PARAMETERS g_BoardParms[] = -+ {&g_bcm96338sv, &g_bcm96338l2m8m, 0}; -+#endif -+ -+#if defined(_BCM96345_) || defined(CONFIG_BCM96345) -+static BOARD_PARAMETERS g_bcm96345r = -+{ -+ "96345R", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_GPIO_11_AH, /* usGpioRj11InnerPair */ -+ BP_GPIO_12_AH, /* usGpioRj11OuterPair */ -+ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_GPIO_8_AH, /* usGpioLedAdsl */ -+ BP_NOT_DEFINED, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_8_AH, /* usGpioLedWanData */ -+ BP_GPIO_9_AH, /* usGpioLedPpp */ -+ BP_NOT_DEFINED, /* usGpioLedPppFail */ -+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ -+ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ -+ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */ -+ BP_GPIO_8_AH, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96345gw2 = -+{ -+ /* A hardware jumper determines whether GPIO 13 is used for Press and Hold -+ * Reset or RTS. -+ */ -+ "96345GW2", /* szBoardId */ -+ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ -+ 0x00, /* ucPhyAddress */ -+ BP_GPIO_0_AH, /* usGpioPhySpiSck */ -+ BP_GPIO_4_AH, /* usGpioPhySpiSs */ -+ BP_GPIO_12_AH, /* usGpioPhySpiMosi */ -+ BP_GPIO_11_AH, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x04, /* numSwitchPorts */ -+ BP_ENET_CONFIG_GPIO, /* usConfigType */ -+ BP_ENET_REVERSE_MII}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_DSP, /* ucDspType */ -+ 0x00, /* ucDspAddress */ -+ BP_EXT_INTR_1, /* usExtIntrVoip */ -+ BP_GPIO_6_AH, /* usGpioVoipReset */ -+ BP_GPIO_15_AH, /* usGpioVoipIntr */ -+ BP_NOT_DEFINED, /* usGpioLedVoip */ -+ BP_CS_2}, /* usCsVoip */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ -+ BP_GPIO_2_AH, /* usGpioPcmciaReset */ -+ BP_GPIO_13_AH, /* usGpioUartRts */ -+ BP_GPIO_9_AH, /* usGpioUartCts */ -+ BP_GPIO_8_AH, /* usGpioLedAdsl */ -+ BP_NOT_DEFINED, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_GPIO_7_AH, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_8_AH, /* usGpioLedWanData */ -+ BP_NOT_DEFINED, /* usGpioLedPpp */ -+ BP_NOT_DEFINED, /* usGpioLedPppFail */ -+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ -+ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ -+ BP_GPIO_7_AH, /* usGpioLedBlResetCfg */ -+ BP_GPIO_8_AH, /* usGpioLedBlStop */ -+ BP_EXT_INTR_2, /* usExtIntrWireless */ -+ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96345gw = -+{ -+ "96345GW", /* szBoardId */ -+ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ -+ 0x00, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x04, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_DSP, /* ucDspType */ -+ 0x00, /* ucDspAddress */ -+ BP_EXT_INTR_1, /* usExtIntrVoip */ -+ BP_GPIO_6_AH, /* usGpioVoipReset */ -+ BP_GPIO_15_AH, /* usGpioVoipIntr */ -+ BP_NOT_DEFINED, /* usGpioLedVoip */ -+ BP_CS_2}, /* usCsVoip */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_16MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_GPIO_11_AH, /* usGpioRj11InnerPair */ -+ BP_GPIO_1_AH, /* usGpioRj11OuterPair */ -+ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ -+ BP_GPIO_2_AH, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_GPIO_8_AH, /* usGpioLedAdsl */ -+ BP_NOT_DEFINED, /* usGpioLedAdslFail */ -+ BP_GPIO_10_AH, /* usGpioLedWireless */ -+ BP_GPIO_7_AH, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_8_AH, /* usGpioLedWanData */ -+ BP_NOT_DEFINED, /* usGpioLedPpp */ -+ BP_NOT_DEFINED, /* usGpioLedPppFail */ -+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ -+ BP_GPIO_9_AH, /* usGpioLedBlAlarm */ -+ BP_GPIO_10_AH, /* usGpioLedBlResetCfg */ -+ BP_GPIO_8_AH, /* usGpioLedBlStop */ -+ BP_EXT_INTR_2, /* usExtIntrWireless */ -+ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ -+ BP_EXT_INTR_3, /* usExtIntrHpna */ -+ BP_CS_1, /* usCsHpna */ -+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96335r = -+{ -+ "96335R", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_14_AH, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_GPIO_9_AH, /* usGpioLedAdsl */ -+ BP_NOT_DEFINED, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_9_AH, /* usGpioLedWanData */ -+ BP_GPIO_8_AH, /* usGpioLedPpp */ -+ BP_NOT_DEFINED, /* usGpioLedPppFail */ -+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ -+ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ -+ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */ -+ BP_GPIO_9_AH, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96345r0 = -+{ -+ "96345R0", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_GPIO_8_AH, /* usGpioLedAdsl */ -+ BP_NOT_DEFINED, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_9_AH, /* usGpioLedWanData */ -+ BP_GPIO_9_AH, /* usGpioLedPpp */ -+ BP_NOT_DEFINED, /* usGpioLedPppFail */ -+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ -+ BP_GPIO_9_AH, /* usGpioLedBlAlarm */ -+ BP_GPIO_8_AH, /* usGpioLedBlResetCfg */ -+ BP_GPIO_8_AH, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96345rs = -+{ -+ "96345RS", /* szBoardId */ -+ {{BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ -+ 0x00, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_ENET_NO_REVERSE_MII}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_GPIO_11_AH, /* usGpioRj11InnerPair */ -+ BP_GPIO_12_AH, /* usGpioRj11OuterPair */ -+ BP_GPIO_13_AH, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_GPIO_8_AH, /* usGpioLedAdsl */ -+ BP_NOT_DEFINED, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_8_AH, /* usGpioLedWanData */ -+ BP_GPIO_9_AH, /* usGpioLedPpp */ -+ BP_NOT_DEFINED, /* usGpioLedPppFail */ -+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ -+ BP_GPIO_10_AH, /* usGpioLedBlAlarm */ -+ BP_GPIO_9_AH, /* usGpioLedBlResetCfg */ -+ BP_GPIO_8_AH, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_EXT_INTR_0, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static PBOARD_PARAMETERS g_BoardParms[] = -+ {&g_bcm96345r, &g_bcm96345gw2, &g_bcm96345gw, &g_bcm96335r, &g_bcm96345r0, -+ &g_bcm96345rs, 0}; -+#endif -+ -+#if defined(_BCM96348_) || defined(CONFIG_BCM96348) -+ -+static BOARD_PARAMETERS g_bcm96348r = -+{ -+ "96348R", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_NO_PHY}}, /* ucPhyType */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_8MB_1_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_GPIO_2_AL, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_3_AL, /* usGpioLedWanData */ -+ BP_GPIO_3_AL, /* usGpioLedPpp */ -+ BP_GPIO_4_AL, /* usGpioLedPppFail */ -+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ -+ BP_GPIO_1_AL, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96348lv = -+{ -+ "96348LV", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */ -+ 0x02, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_GPIO_5_AL, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}}, /* usReverseMii */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_7_AH, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_GPIO_2_AL, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_3_AL, /* usGpioLedWanData */ -+ BP_GPIO_3_AL, /* usGpioLedPpp */ -+ BP_GPIO_4_AL, /* usGpioLedPppFail */ -+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ -+ BP_GPIO_1_AL, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96348gw = -+{ -+ "96348GW", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ -+ 0x00, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x03, /* numSwitchPorts */ -+ BP_ENET_CONFIG_SPI_SSB_0, /* usConfigType */ -+ BP_ENET_REVERSE_MII}}, /* usReverseMii */ -+ {{BP_VOIP_DSP, /* ucDspType */ -+ 0x00, /* ucDspAddress */ -+ BP_EXT_INTR_2, /* usExtIntrVoip */ -+ BP_GPIO_6_AH, /* usGpioVoipReset */ -+ BP_GPIO_34_AH, /* usGpioVoipIntr */ -+ BP_NOT_DEFINED, /* usGpioLedVoip */ -+ BP_CS_2}, /* usCsVoip */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_GPIO_2_AL, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_3_AL, /* usGpioLedWanData */ -+ BP_GPIO_3_AL, /* usGpioLedPpp */ -+ BP_GPIO_4_AL, /* usGpioLedPppFail */ -+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ -+ BP_GPIO_1_AL, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* BP_GPIO_35_AH, */ /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* BP_EXT_INTR_3, */ /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* BP_GPIO_0_AL */ /* usGpioLedSesWireless */ -+}; -+ -+ -+static BOARD_PARAMETERS g_bcm96348gw_10 = -+{ -+ "96348GW-10", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ -+ 0x00, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x03, /* numSwitchPorts */ -+ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ -+ BP_ENET_REVERSE_MII}}, /* usReverseMii */ -+ {{BP_VOIP_DSP, /* ucDspType */ -+ 0x00, /* ucDspAddress */ -+ BP_EXT_INTR_2, /* usExtIntrVoip */ -+ BP_GPIO_6_AH, /* usGpioVoipReset */ -+ BP_GPIO_34_AH, /* usGpioVoipIntr */ -+ BP_NOT_DEFINED, /* usGpioLedVoip */ -+ BP_CS_2}, /* usCsVoip */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_GPIO_2_AL, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_3_AL, /* usGpioLedWanData */ -+ BP_GPIO_3_AL, /* usGpioLedPpp */ -+ BP_GPIO_4_AL, /* usGpioLedPppFail */ -+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ -+ BP_GPIO_1_AL, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96348gw_11 = -+{ -+ "96348GW-11", /* szBoardId */ -+ {{BP_ENET_NO_PHY}, /* ucPhyType */ -+ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ -+ 0x00, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x04, /* numSwitchPorts */ -+ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ -+ BP_ENET_REVERSE_MII}}, /* usReverseMii */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_GPIO_2_AL, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_3_AL, /* usGpioLedWanData */ -+ BP_GPIO_3_AL, /* usGpioLedPpp */ -+ BP_GPIO_4_AL, /* usGpioLedPppFail */ -+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ -+ BP_GPIO_1_AL, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static BOARD_PARAMETERS g_bcm96348sv = -+{ -+ "96348SV", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_EXTERNAL_PHY, /* ucPhyType */ -+ 0x1f, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}}, /* usReverseMii */ -+ {{BP_VOIP_NO_DSP}, /* ucDspType */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_32MB_2_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_NOT_DEFINED, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_NOT_DEFINED, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_NOT_DEFINED, /* usGpioLedWanData */ -+ BP_NOT_DEFINED, /* usGpioLedPpp */ -+ BP_NOT_DEFINED, /* usGpioLedPppFail */ -+ BP_NOT_DEFINED, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_NOT_DEFINED, /* usGpioLedBlResetCfg */ -+ BP_NOT_DEFINED, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+ -+static BOARD_PARAMETERS g_bcm96348gw_dualDsp = -+{ -+ "96348GW-DualDSP", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_EXTERNAL_SWITCH, /* ucPhyType */ -+ 0x00, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x03, /* numSwitchPorts */ -+ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ -+ BP_ENET_REVERSE_MII}}, /* usReverseMii */ -+ {{BP_VOIP_DSP, /* ucDspType */ -+ 0x00, /* ucDspAddress */ -+ BP_EXT_INTR_2, /* usExtIntrVoip */ -+ BP_UNEQUIPPED, /* usGpioVoipReset */ -+ BP_GPIO_34_AH, /* usGpioVoipIntr */ -+ BP_NOT_DEFINED, /* usGpioLedVoip */ -+ BP_CS_2}, /* usCsVoip */ -+ {BP_VOIP_DSP, /* ucDspType */ -+ 0x01, /* ucDspAddress */ -+ BP_EXT_INTR_3, /* usExtIntrVoip */ -+ BP_UNEQUIPPED , /* usGpioVoipReset */ -+ BP_GPIO_35_AH, /* usGpioVoipIntr */ -+ BP_NOT_DEFINED, /* usGpioLedVoip */ -+ BP_CS_3}}, /* usCsVoip */ -+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_GPIO_2_AL, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_3_AL, /* usGpioLedWanData */ -+ BP_GPIO_3_AL, /* usGpioLedPpp */ -+ BP_GPIO_4_AL, /* usGpioLedPppFail */ -+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ -+ BP_GPIO_1_AL, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_HW_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_WLAN_ANT_MAIN, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+ -+static BOARD_PARAMETERS g_bcmCustom_01 = -+{ -+ "BCMCUST_01", /* szBoardId */ -+ {{BP_ENET_INTERNAL_PHY, /* ucPhyType */ -+ 0x01, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_MDIO, /* usConfigType */ -+ BP_NOT_DEFINED}, /* usReverseMii */ -+ {BP_ENET_NO_PHY, /* ucPhyType */ -+ 0x00, /* ucPhyAddress */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSck */ -+ BP_NOT_DEFINED, /* usGpioPhySpiSs */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMosi */ -+ BP_NOT_DEFINED, /* usGpioPhySpiMiso */ -+ BP_NOT_DEFINED, /* usGpioPhyReset */ -+ 0x01, /* numSwitchPorts */ -+ BP_ENET_CONFIG_SPI_SSB_1, /* usConfigType */ -+ BP_ENET_REVERSE_MII}}, /* usReverseMii */ -+ {{BP_VOIP_DSP, /* ucDspType */ -+ 0x00, /* ucDspAddress */ -+ BP_EXT_INTR_2, /* usExtIntrVoip */ -+ BP_GPIO_36_AH, /* usGpioVoipReset */ -+ BP_GPIO_34_AL, /* usGpioVoipIntr */ -+ BP_NOT_DEFINED, /* usGpioLedVoip */ -+ BP_CS_2}, /* usCsVoip */ -+ {BP_VOIP_NO_DSP}}, /* ucDspType */ -+ BP_MEMORY_16MB_2_CHIP, /* usSdramSize */ -+ BP_PSI_DEFAULT_SIZE, /* usPsiSize */ -+ BP_NOT_DEFINED, /* usGpioRj11InnerPair */ -+ BP_NOT_DEFINED, /* usGpioRj11OuterPair */ -+ BP_GPIO_33_AL, /* usGpioPressAndHoldReset */ -+ BP_NOT_DEFINED, /* usGpioPcmciaReset */ -+ BP_NOT_DEFINED, /* usGpioUartRts */ -+ BP_NOT_DEFINED, /* usGpioUartCts */ -+ BP_NOT_DEFINED, /* usGpioLedAdsl */ -+ BP_GPIO_2_AL, /* usGpioLedAdslFail */ -+ BP_NOT_DEFINED, /* usGpioLedWireless */ -+ BP_NOT_DEFINED, /* usGpioLedUsb */ -+ BP_NOT_DEFINED, /* usGpioLedHpna */ -+ BP_GPIO_3_AL, /* usGpioLedWanData */ -+ BP_GPIO_3_AL, /* usGpioLedPpp */ -+ BP_GPIO_4_AL, /* usGpioLedPppFail */ -+ BP_GPIO_0_AL, /* usGpioLedBlPowerOn */ -+ BP_NOT_DEFINED, /* usGpioLedBlAlarm */ -+ BP_GPIO_3_AL, /* usGpioLedBlResetCfg */ -+ BP_GPIO_1_AL, /* usGpioLedBlStop */ -+ BP_NOT_DEFINED, /* usExtIntrWireless */ -+ BP_NOT_DEFINED, /* usExtIntrAdslDyingGasp */ -+ BP_NOT_DEFINED, /* usExtIntrHpna */ -+ BP_NOT_DEFINED, /* usCsHpna */ -+ BP_NOT_DEFINED, /* usAntInUseWireless */ -+ BP_NOT_DEFINED, /* usGpioSesBtnWireless */ -+ BP_NOT_DEFINED, /* usExtIntrSesBtnWireless */ -+ BP_NOT_DEFINED /* usGpioLedSesWireless */ -+}; -+ -+static PBOARD_PARAMETERS g_BoardParms[] = -+ {&g_bcm96348r, &g_bcm96348lv, &g_bcm96348gw, &g_bcm96348gw_10, -+ &g_bcm96348gw_11, &g_bcm96348sv, &g_bcm96348gw_dualDsp, -+ &g_bcmCustom_01, 0}; -+#endif -+ -+static PBOARD_PARAMETERS g_pCurrentBp = 0; -+ -+/************************************************************************** -+ * Name : bpstrcmp -+ * -+ * Description: String compare for this file so it does not depend on an OS. -+ * (Linux kernel and CFE share this source file.) -+ * -+ * Parameters : [IN] dest - destination string -+ * [IN] src - source string -+ * -+ * Returns : -1 - dest < src, 1 - dest > src, 0 dest == src -+ ***************************************************************************/ -+static int bpstrcmp(const char *dest,const char *src); -+static int bpstrcmp(const char *dest,const char *src) -+{ -+ while (*src && *dest) -+ { -+ if (*dest < *src) return -1; -+ if (*dest > *src) return 1; -+ dest++; -+ src++; -+ } -+ -+ if (*dest && !*src) return 1; -+ if (!*dest && *src) return -1; -+ return 0; -+} /* bpstrcmp */ -+ -+/************************************************************************** -+ * Name : BpGetVoipDspConfig -+ * -+ * Description: Gets the DSP configuration from the board parameter -+ * structure for a given DSP index. -+ * -+ * Parameters : [IN] dspNum - DSP index (number) -+ * -+ * Returns : Pointer to DSP configuration block if found/valid, NULL -+ * otherwise. -+ ***************************************************************************/ -+VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum ); -+VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum ) -+{ -+ VOIP_DSP_INFO *pDspConfig = 0; -+ int i; -+ -+ if( g_pCurrentBp ) -+ { -+ for( i = 0 ; i < BP_MAX_VOIP_DSP ; i++ ) -+ { -+ if( g_pCurrentBp->VoIPDspInfo[i].ucDspType != BP_VOIP_NO_DSP && -+ g_pCurrentBp->VoIPDspInfo[i].ucDspAddress == dspNum ) -+ { -+ pDspConfig = &g_pCurrentBp->VoIPDspInfo[i]; -+ break; -+ } -+ } -+ } -+ -+ return pDspConfig; -+} -+ -+ -+/************************************************************************** -+ * Name : BpSetBoardId -+ * -+ * Description: This function find the BOARD_PARAMETERS structure for the -+ * specified board id string and assigns it to a global, static -+ * variable. -+ * -+ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not -+ * have a board parameters configuration record. -+ ***************************************************************************/ -+int BpSetBoardId( char *pszBoardId ) -+{ -+ int nRet = BP_BOARD_ID_NOT_FOUND; -+ PBOARD_PARAMETERS *ppBp; -+ -+ for( ppBp = g_BoardParms; *ppBp; ppBp++ ) -+ { -+ if( !bpstrcmp((*ppBp)->szBoardId, pszBoardId) ) -+ { -+ g_pCurrentBp = *ppBp; -+ nRet = BP_SUCCESS; -+ break; -+ } -+ } -+ -+ return( nRet ); -+} /* BpSetBoardId */ -+ -+/************************************************************************** -+ * Name : BpGetBoardIds -+ * -+ * Description: This function returns all of the supported board id strings. -+ * -+ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id -+ * strings are returned in. Each id starts at BP_BOARD_ID_LEN -+ * boundary. -+ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that -+ * were allocated in pszBoardIds. -+ * -+ * Returns : Number of board id strings returned. -+ ***************************************************************************/ -+int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize ) -+{ -+ PBOARD_PARAMETERS *ppBp; -+ int i; -+ char *src; -+ char *dest; -+ -+ for( i = 0, ppBp = g_BoardParms; *ppBp && nBoardIdsSize; -+ i++, ppBp++, nBoardIdsSize--, pszBoardIds += BP_BOARD_ID_LEN ) -+ { -+ dest = pszBoardIds; -+ src = (*ppBp)->szBoardId; -+ while( *src ) -+ *dest++ = *src++; -+ *dest = '\0'; -+ } -+ -+ return( i ); -+} /* BpGetBoardIds */ -+ -+/************************************************************************** -+ * Name : BpGetEthernetMacInfo -+ * -+ * Description: This function returns all of the supported board id strings. -+ * -+ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO -+ * buffers. -+ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that -+ * are pointed to by pEnetInfos. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ ***************************************************************************/ -+int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos ) -+{ -+ int i, nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ ) -+ { -+ if( i < BP_MAX_ENET_MACS ) -+ { -+ unsigned char *src = (unsigned char *) -+ &g_pCurrentBp->EnetMacInfos[i]; -+ unsigned char *dest = (unsigned char *) pEnetInfos; -+ int len = sizeof(ETHERNET_MAC_INFO); -+ while( len-- ) -+ *dest++ = *src++; -+ } -+ else -+ pEnetInfos->ucPhyType = BP_ENET_NO_PHY; -+ } -+ -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ for( i = 0; i < nNumEnetInfos; i++, pEnetInfos++ ) -+ pEnetInfos->ucPhyType = BP_ENET_NO_PHY; -+ -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetEthernetMacInfo */ -+ -+/************************************************************************** -+ * Name : BpGetSdramSize -+ * -+ * Description: This function returns a constant that describees the board's -+ * SDRAM type and size. -+ * -+ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size -+ * is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ ***************************************************************************/ -+int BpGetSdramSize( unsigned long *pulSdramSize ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pulSdramSize = g_pCurrentBp->usSdramSize; -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ *pulSdramSize = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetSdramSize */ -+ -+/************************************************************************** -+ * Name : BpGetPsiSize -+ * -+ * Description: This function returns the persistent storage size in K bytes. -+ * -+ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent -+ * storage size is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ ***************************************************************************/ -+int BpGetPsiSize( unsigned long *pulPsiSize ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pulPsiSize = g_pCurrentBp->usPsiSize; -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ *pulPsiSize = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetPsiSize */ -+ -+/************************************************************************** -+ * Name : BpGetRj11InnerOuterPairGpios -+ * -+ * Description: This function returns the GPIO pin assignments for changing -+ * between the RJ11 inner pair and RJ11 outer pair. -+ * -+ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair -+ * GPIO pin is returned in. -+ * [OUT] pusOuter - Address of short word that the RJ11 outer pair -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, values are returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner, -+ unsigned short *pusOuter ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusInner = g_pCurrentBp->usGpioRj11InnerPair; -+ *pusOuter = g_pCurrentBp->usGpioRj11OuterPair; -+ -+ if( g_pCurrentBp->usGpioRj11InnerPair != BP_NOT_DEFINED && -+ g_pCurrentBp->usGpioRj11OuterPair != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusInner = *pusOuter = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetRj11InnerOuterPairGpios */ -+ -+/************************************************************************** -+ * Name : BpGetPressAndHoldResetGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the press -+ * and hold reset button. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the press and hold -+ * reset button GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetPressAndHoldResetGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioPressAndHoldReset; -+ -+ if( g_pCurrentBp->usGpioPressAndHoldReset != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetPressAndHoldResetGpio */ -+ -+/************************************************************************** -+ * Name : BpGetVoipResetGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the VOIP -+ * Reset operation. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset -+ * GPIO pin is returned in. -+ * [IN] dspNum - Address of the DSP to query. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); -+ -+ if( pDspInfo ) -+ { -+ *pusValue = pDspInfo->usGpioVoipReset; -+ -+ if( *pusValue != BP_NOT_DEFINED || -+ *pusValue == BP_UNEQUIPPED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_FOUND; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetVoipResetGpio */ -+ -+/************************************************************************** -+ * Name : BpGetVoipIntrGpio -+ * -+ * Description: This function returns the GPIO pin assignment for VoIP interrupt. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt -+ * GPIO pin is returned in. -+ * [IN] dspNum - Address of the DSP to query. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); -+ -+ if( pDspInfo ) -+ { -+ *pusValue = pDspInfo->usGpioVoipIntr; -+ -+ if( *pusValue != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_FOUND; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetVoipIntrGpio */ -+ -+/************************************************************************** -+ * Name : BpGetPcmciaResetGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the PCMCIA -+ * Reset operation. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetPcmciaResetGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioPcmciaReset; -+ -+ if( g_pCurrentBp->usGpioPcmciaReset != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetPcmciaResetGpio */ -+ -+/************************************************************************** -+ * Name : BpGetUartRtsCtsGpios -+ * -+ * Description: This function returns the GPIO pin assignments for RTS and CTS -+ * UART signals. -+ * -+ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO -+ * pin is returned in. -+ * [OUT] pusCts - Address of short word that the UART CTS GPIO -+ * pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, values are returned. -+ * BP_BOARD_ID_NOT_SET - Error, board id input string does not -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusRts = g_pCurrentBp->usGpioUartRts; -+ *pusCts = g_pCurrentBp->usGpioUartCts; -+ -+ if( g_pCurrentBp->usGpioUartRts != BP_NOT_DEFINED && -+ g_pCurrentBp->usGpioUartCts != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusRts = *pusCts = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetUartRtsCtsGpios */ -+ -+/************************************************************************** -+ * Name : BpGetAdslLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the ADSL -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetAdslLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedAdsl; -+ -+ if( g_pCurrentBp->usGpioLedAdsl != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetAdslLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetAdslFailLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the ADSL -+ * LED that is used when there is a DSL connection failure. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetAdslFailLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedAdslFail; -+ -+ if( g_pCurrentBp->usGpioLedAdslFail != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetAdslFailLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetWirelessLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the Wireless -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedWireless; -+ -+ if( g_pCurrentBp->usGpioLedWireless != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetWirelessLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetWirelessAntInUse -+ * -+ * Description: This function returns the antennas in use for wireless -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna -+ * is in use. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessAntInUse( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usAntInUseWireless; -+ -+ if( g_pCurrentBp->usAntInUseWireless != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetWirelessAntInUse */ -+ -+/************************************************************************** -+ * Name : BpGetWirelessSesBtnGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the Wireless -+ * Ses Button. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessSesBtnGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioSesBtnWireless; -+ -+ if( g_pCurrentBp->usGpioSesBtnWireless != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetWirelessSesBtnGpio */ -+ -+/************************************************************************** -+ * Name : BpGetWirelessSesExtIntr -+ * -+ * Description: This function returns the external interrupt number for the -+ * Wireless Ses Button. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses -+ * external interrup is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessSesExtIntr( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usExtIntrSesBtnWireless; -+ -+ if( g_pCurrentBp->usExtIntrSesBtnWireless != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+ -+} /* BpGetWirelessSesExtIntr */ -+ -+/************************************************************************** -+ * Name : BpGetWirelessSesLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the Wireless -+ * Ses Led. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses -+ * Led GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessSesLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedSesWireless; -+ -+ if( g_pCurrentBp->usGpioLedSesWireless != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+ -+} /* BpGetWirelessSesLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetUsbLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the USB -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the USB LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetUsbLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedUsb; -+ -+ if( g_pCurrentBp->usGpioLedUsb != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetUsbLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetHpnaLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the HPNA -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetHpnaLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedHpna; -+ -+ if( g_pCurrentBp->usGpioLedHpna != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetHpnaLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetWanDataLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the WAN Data -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWanDataLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedWanData; -+ -+ if( g_pCurrentBp->usGpioLedWanData != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetWanDataLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetPppLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the PPP -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the PPP LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetPppLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedPpp; -+ -+ if( g_pCurrentBp->usGpioLedPpp != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetPppLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetPppFailLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the PPP -+ * LED that is used when there is a PPP connection failure. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the PPP LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetPppFailLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedPppFail; -+ -+ if( g_pCurrentBp->usGpioLedPppFail != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetPppFailLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetBootloaderPowerOnLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the power -+ * on LED that is set by the bootloader. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the alarm LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedBlPowerOn; -+ -+ if( g_pCurrentBp->usGpioLedBlPowerOn != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetBootloaderPowerOn */ -+ -+/************************************************************************** -+ * Name : BpGetBootloaderAlarmLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the alarm -+ * LED that is set by the bootloader. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the alarm LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedBlAlarm; -+ -+ if( g_pCurrentBp->usGpioLedBlAlarm != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetBootloaderAlarmLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetBootloaderResetCfgLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the reset -+ * configuration LED that is set by the bootloader. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the reset -+ * configuration LED GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedBlResetCfg; -+ -+ if( g_pCurrentBp->usGpioLedBlResetCfg != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetBootloaderResetCfgLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetBootloaderStopLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the break -+ * into bootloader LED that is set by the bootloader. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the break into -+ * bootloader LED GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetBootloaderStopLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pusValue = g_pCurrentBp->usGpioLedBlStop; -+ -+ if( g_pCurrentBp->usGpioLedBlStop != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetBootloaderStopLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetVoipLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the VOIP -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ * -+ * Note : The VoIP structure would allow for having one LED per DSP -+ * however, the board initialization function assumes only one -+ * LED per functionality (ie one LED for VoIP). Therefore in -+ * order to keep this tidy and simple we do not make usage of the -+ * one-LED-per-DSP function. Instead, we assume that the LED for -+ * VoIP is unique and associated with DSP 0 (always present on -+ * any VoIP platform). If changing this to a LED-per-DSP function -+ * then one need to update the board initialization driver in -+ * bcmdrivers\opensource\char\board\bcm963xx\impl1 -+ ***************************************************************************/ -+int BpGetVoipLedGpio( unsigned short *pusValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( 0 ); -+ -+ if( pDspInfo ) -+ { -+ *pusValue = pDspInfo->usGpioLedVoip; -+ -+ if( *pusValue != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_FOUND; -+ } -+ } -+ else -+ { -+ *pusValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetVoipLedGpio */ -+ -+/************************************************************************** -+ * Name : BpGetWirelessExtIntr -+ * -+ * Description: This function returns the Wireless external interrupt number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the wireless -+ * external interrupt number is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessExtIntr( unsigned long *pulValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pulValue = g_pCurrentBp->usExtIntrWireless; -+ -+ if( g_pCurrentBp->usExtIntrWireless != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pulValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetWirelessExtIntr */ -+ -+/************************************************************************** -+ * Name : BpGetAdslDyingGaspExtIntr -+ * -+ * Description: This function returns the ADSL Dying Gasp external interrupt -+ * number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp -+ * external interrupt number is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pulValue = g_pCurrentBp->usExtIntrAdslDyingGasp; -+ -+ if( g_pCurrentBp->usExtIntrAdslDyingGasp != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pulValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetAdslDyingGaspExtIntr */ -+ -+/************************************************************************** -+ * Name : BpGetVoipExtIntr -+ * -+ * Description: This function returns the VOIP external interrupt number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the VOIP -+ * external interrupt number is returned in. -+ * [IN] dspNum - Address of the DSP to query. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); -+ -+ if( pDspInfo ) -+ { -+ *pulValue = pDspInfo->usExtIntrVoip; -+ -+ if( *pulValue != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pulValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_FOUND; -+ } -+ } -+ else -+ { -+ *pulValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetVoipExtIntr */ -+ -+/************************************************************************** -+ * Name : BpGetHpnaExtIntr -+ * -+ * Description: This function returns the HPNA external interrupt number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the HPNA -+ * external interrupt number is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetHpnaExtIntr( unsigned long *pulValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pulValue = g_pCurrentBp->usExtIntrHpna; -+ -+ if( g_pCurrentBp->usExtIntrHpna != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pulValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetHpnaExtIntr */ -+ -+/************************************************************************** -+ * Name : BpGetHpnaChipSelect -+ * -+ * Description: This function returns the HPNA chip select number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the HPNA -+ * chip select number is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetHpnaChipSelect( unsigned long *pulValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ *pulValue = g_pCurrentBp->usCsHpna; -+ -+ if( g_pCurrentBp->usCsHpna != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pulValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetHpnaChipSelect */ -+ -+/************************************************************************** -+ * Name : BpGetVoipChipSelect -+ * -+ * Description: This function returns the VOIP chip select number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the VOIP -+ * chip select number is returned in. -+ * [IN] dspNum - Address of the DSP to query. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue ) -+{ -+ int nRet; -+ -+ if( g_pCurrentBp ) -+ { -+ VOIP_DSP_INFO *pDspInfo = BpGetVoipDspConfig( dspNum ); -+ -+ if( pDspInfo ) -+ { -+ *pulValue = pDspInfo->usCsVoip; -+ -+ if( *pulValue != BP_NOT_DEFINED ) -+ { -+ nRet = BP_SUCCESS; -+ } -+ else -+ { -+ nRet = BP_VALUE_NOT_DEFINED; -+ } -+ } -+ else -+ { -+ *pulValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_FOUND; -+ } -+ } -+ else -+ { -+ *pulValue = BP_NOT_DEFINED; -+ nRet = BP_BOARD_ID_NOT_SET; -+ } -+ -+ return( nRet ); -+} /* BpGetVoipChipSelect */ -+ -diff -Naurp linux-2.6.16.7-generic-patched/boardparms/bcm963xx/boardparms.h linux-2.6.16.7-patched/boardparms/bcm963xx/boardparms.h ---- linux-2.6.16.7-generic-patched/boardparms/bcm963xx/boardparms.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.16.7-patched/boardparms/bcm963xx/boardparms.h 2006-07-05 15:21:58.000000000 +0200 -@@ -0,0 +1,766 @@ -+/* -+<:copyright-gpl -+ -+ Copyright 2003 Broadcom Corp. All Rights Reserved. -+ -+ This program is free software; you can distribute it and/or modify it -+ under the terms of the GNU General Public License (Version 2) as -+ published by the Free Software Foundation. -+ -+ This program is distributed in the hope it will be useful, but WITHOUT -+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+ for more details. -+ -+ You should have received a copy of the GNU General Public License along -+ with this program; if not, write to the Free Software Foundation, Inc., -+ 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+ -+:> -+*/ -+/************************************************************************** -+ * File Name : boardparms.h -+ * -+ * Description: This file contains definitions and function prototypes for -+ * the BCM63xx board parameter access functions. -+ * -+ * Updates : 07/14/2003 Created. -+ ***************************************************************************/ -+ -+#if !defined(_BOARDPARMS_H) -+#define _BOARDPARMS_H -+ -+#if __cplusplus -+extern "C" { -+#endif -+ -+/* Return codes. */ -+#define BP_SUCCESS 0 -+#define BP_BOARD_ID_NOT_FOUND 1 -+#define BP_VALUE_NOT_DEFINED 2 -+#define BP_BOARD_ID_NOT_SET 3 -+ -+/* Values for BpGetSdramSize. */ -+#define BP_MEMORY_8MB_1_CHIP 0 -+#define BP_MEMORY_16MB_1_CHIP 1 -+#define BP_MEMORY_32MB_1_CHIP 2 -+#define BP_MEMORY_64MB_2_CHIP 3 -+#define BP_MEMORY_32MB_2_CHIP 4 -+#define BP_MEMORY_16MB_2_CHIP 5 -+ -+/* Values for EthernetMacInfo PhyType. */ -+#define BP_ENET_NO_PHY 0 -+#define BP_ENET_INTERNAL_PHY 1 -+#define BP_ENET_EXTERNAL_PHY 2 -+#define BP_ENET_EXTERNAL_SWITCH 3 -+ -+/* Values for EthernetMacInfo Configuration type. */ -+#define BP_ENET_CONFIG_MDIO 0 /* Internal PHY, External PHY, Switch+(no GPIO, no SPI, no MDIO Pseudo phy */ -+#define BP_ENET_CONFIG_GPIO 1 /* Bcm96345GW board + Bcm5325M/E */ -+#define BP_ENET_CONFIG_MDIO_PSEUDO_PHY 2 /* Bcm96348GW board + Bcm5325E */ -+#define BP_ENET_CONFIG_SPI_SSB_0 3 /* Bcm96348GW board + Bcm5325M/E */ -+#define BP_ENET_CONFIG_SPI_SSB_1 4 /* Bcm96348GW board + Bcm5325M/E */ -+#define BP_ENET_CONFIG_SPI_SSB_2 5 /* Bcm96348GW board + Bcm5325M/E */ -+#define BP_ENET_CONFIG_SPI_SSB_3 6 /* Bcm96348GW board + Bcm5325M/E */ -+ -+/* Values for EthernetMacInfo Reverse MII. */ -+#define BP_ENET_NO_REVERSE_MII 0 -+#define BP_ENET_REVERSE_MII 1 -+ -+/* Values for VoIPDSPInfo DSPType. */ -+#define BP_VOIP_NO_DSP 0 -+#define BP_VOIP_DSP 1 -+ -+ -+/* Values for GPIO pin assignments (AH = Active High, AL = Active Low). */ -+#define BP_ACTIVE_MASK 0x8000 -+#define BP_ACTIVE_HIGH 0x0000 -+#define BP_ACTIVE_LOW 0x8000 -+#define BP_GPIO_0_AH (0 | BP_ACTIVE_HIGH) -+#define BP_GPIO_0_AL (0 | BP_ACTIVE_LOW) -+#define BP_GPIO_1_AH (1 | BP_ACTIVE_HIGH) -+#define BP_GPIO_1_AL (1 | BP_ACTIVE_LOW) -+#define BP_GPIO_2_AH (2 | BP_ACTIVE_HIGH) -+#define BP_GPIO_2_AL (2 | BP_ACTIVE_LOW) -+#define BP_GPIO_3_AH (3 | BP_ACTIVE_HIGH) -+#define BP_GPIO_3_AL (3 | BP_ACTIVE_LOW) -+#define BP_GPIO_4_AH (4 | BP_ACTIVE_HIGH) -+#define BP_GPIO_4_AL (4 | BP_ACTIVE_LOW) -+#define BP_GPIO_5_AH (5 | BP_ACTIVE_HIGH) -+#define BP_GPIO_5_AL (5 | BP_ACTIVE_LOW) -+#define BP_GPIO_6_AH (6 | BP_ACTIVE_HIGH) -+#define BP_GPIO_6_AL (6 | BP_ACTIVE_LOW) -+#define BP_GPIO_7_AH (7 | BP_ACTIVE_HIGH) -+#define BP_GPIO_7_AL (7 | BP_ACTIVE_LOW) -+#define BP_GPIO_8_AH (8 | BP_ACTIVE_HIGH) -+#define BP_GPIO_8_AL (8 | BP_ACTIVE_LOW) -+#define BP_GPIO_9_AH (9 | BP_ACTIVE_HIGH) -+#define BP_GPIO_9_AL (9 | BP_ACTIVE_LOW) -+#define BP_GPIO_10_AH (10 | BP_ACTIVE_HIGH) -+#define BP_GPIO_10_AL (10 | BP_ACTIVE_LOW) -+#define BP_GPIO_11_AH (11 | BP_ACTIVE_HIGH) -+#define BP_GPIO_11_AL (11 | BP_ACTIVE_LOW) -+#define BP_GPIO_12_AH (12 | BP_ACTIVE_HIGH) -+#define BP_GPIO_12_AL (12 | BP_ACTIVE_LOW) -+#define BP_GPIO_13_AH (13 | BP_ACTIVE_HIGH) -+#define BP_GPIO_13_AL (13 | BP_ACTIVE_LOW) -+#define BP_GPIO_14_AH (14 | BP_ACTIVE_HIGH) -+#define BP_GPIO_14_AL (14 | BP_ACTIVE_LOW) -+#define BP_GPIO_15_AH (15 | BP_ACTIVE_HIGH) -+#define BP_GPIO_15_AL (15 | BP_ACTIVE_LOW) -+#define BP_GPIO_16_AH (16 | BP_ACTIVE_HIGH) -+#define BP_GPIO_16_AL (16 | BP_ACTIVE_LOW) -+#define BP_GPIO_17_AH (17 | BP_ACTIVE_HIGH) -+#define BP_GPIO_17_AL (17 | BP_ACTIVE_LOW) -+#define BP_GPIO_18_AH (18 | BP_ACTIVE_HIGH) -+#define BP_GPIO_18_AL (18 | BP_ACTIVE_LOW) -+#define BP_GPIO_19_AH (19 | BP_ACTIVE_HIGH) -+#define BP_GPIO_19_AL (19 | BP_ACTIVE_LOW) -+#define BP_GPIO_20_AH (20 | BP_ACTIVE_HIGH) -+#define BP_GPIO_20_AL (20 | BP_ACTIVE_LOW) -+#define BP_GPIO_21_AH (21 | BP_ACTIVE_HIGH) -+#define BP_GPIO_21_AL (21 | BP_ACTIVE_LOW) -+#define BP_GPIO_22_AH (22 | BP_ACTIVE_HIGH) -+#define BP_GPIO_22_AL (22 | BP_ACTIVE_LOW) -+#define BP_GPIO_23_AH (23 | BP_ACTIVE_HIGH) -+#define BP_GPIO_23_AL (23 | BP_ACTIVE_LOW) -+#define BP_GPIO_24_AH (24 | BP_ACTIVE_HIGH) -+#define BP_GPIO_24_AL (24 | BP_ACTIVE_LOW) -+#define BP_GPIO_25_AH (25 | BP_ACTIVE_HIGH) -+#define BP_GPIO_25_AL (25 | BP_ACTIVE_LOW) -+#define BP_GPIO_26_AH (26 | BP_ACTIVE_HIGH) -+#define BP_GPIO_26_AL (26 | BP_ACTIVE_LOW) -+#define BP_GPIO_27_AH (27 | BP_ACTIVE_HIGH) -+#define BP_GPIO_27_AL (27 | BP_ACTIVE_LOW) -+#define BP_GPIO_28_AH (28 | BP_ACTIVE_HIGH) -+#define BP_GPIO_28_AL (28 | BP_ACTIVE_LOW) -+#define BP_GPIO_29_AH (29 | BP_ACTIVE_HIGH) -+#define BP_GPIO_29_AL (29 | BP_ACTIVE_LOW) -+#define BP_GPIO_30_AH (30 | BP_ACTIVE_HIGH) -+#define BP_GPIO_30_AL (30 | BP_ACTIVE_LOW) -+#define BP_GPIO_31_AH (31 | BP_ACTIVE_HIGH) -+#define BP_GPIO_31_AL (31 | BP_ACTIVE_LOW) -+#define BP_GPIO_32_AH (32 | BP_ACTIVE_HIGH) -+#define BP_GPIO_32_AL (32 | BP_ACTIVE_LOW) -+#define BP_GPIO_33_AH (33 | BP_ACTIVE_HIGH) -+#define BP_GPIO_33_AL (33 | BP_ACTIVE_LOW) -+#define BP_GPIO_34_AH (34 | BP_ACTIVE_HIGH) -+#define BP_GPIO_34_AL (34 | BP_ACTIVE_LOW) -+#define BP_GPIO_35_AH (35 | BP_ACTIVE_HIGH) -+#define BP_GPIO_35_AL (35 | BP_ACTIVE_LOW) -+#define BP_GPIO_36_AH (36 | BP_ACTIVE_HIGH) -+#define BP_GPIO_36_AL (36 | BP_ACTIVE_LOW) -+ -+/* Values for external interrupt assignments. */ -+#define BP_EXT_INTR_0 0 -+#define BP_EXT_INTR_1 1 -+#define BP_EXT_INTR_2 2 -+#define BP_EXT_INTR_3 3 -+ -+/* Values for chip select assignments. */ -+#define BP_CS_0 0 -+#define BP_CS_1 1 -+#define BP_CS_2 2 -+#define BP_CS_3 3 -+ -+/* Value for GPIO and external interrupt fields that are not used. */ -+#define BP_NOT_DEFINED 0xffff -+#define BP_HW_DEFINED 0xfff0 -+#define BP_UNEQUIPPED 0xfff1 -+ -+/* Maximum size of the board id string. */ -+#define BP_BOARD_ID_LEN 16 -+ -+/* Maximum number of Ethernet MACs. */ -+#define BP_MAX_ENET_MACS 2 -+ -+/* Maximum number of VoIP DSPs. */ -+#define BP_MAX_VOIP_DSP 2 -+ -+/* Wireless Antenna Settings. */ -+#define BP_WLAN_ANT_MAIN 0 -+#define BP_WLAN_ANT_AUX 1 -+#define BP_WLAN_ANT_BOTH 3 -+ -+#if !defined(__ASSEMBLER__) -+ -+/* Information about an Ethernet MAC. If ucPhyType is BP_ENET_NO_PHY, -+ * then the other fields are not valid. -+ */ -+typedef struct EthernetMacInfo -+{ -+ unsigned char ucPhyType; /* BP_ENET_xxx */ -+ unsigned char ucPhyAddress; /* 0 to 31 */ -+ unsigned short usGpioPhySpiSck; /* GPIO pin or not defined */ -+ unsigned short usGpioPhySpiSs; /* GPIO pin or not defined */ -+ unsigned short usGpioPhySpiMosi; /* GPIO pin or not defined */ -+ unsigned short usGpioPhySpiMiso; /* GPIO pin or not defined */ -+ unsigned short usGpioPhyReset; /* GPIO pin or not defined (96348LV) */ -+ unsigned short numSwitchPorts; /* Number of PHY ports */ -+ unsigned short usConfigType; /* Configuration type */ -+ unsigned short usReverseMii; /* Reverse MII */ -+} ETHERNET_MAC_INFO, *PETHERNET_MAC_INFO; -+ -+ -+/* Information about VoIP DSPs. If ucDspType is BP_VOIP_NO_DSP, -+ * then the other fields are not valid. -+ */ -+typedef struct VoIPDspInfo -+{ -+ unsigned char ucDspType; -+ unsigned char ucDspAddress; -+ unsigned short usExtIntrVoip; -+ unsigned short usGpioVoipReset; -+ unsigned short usGpioVoipIntr; -+ unsigned short usGpioLedVoip; -+ unsigned short usCsVoip; -+ -+} VOIP_DSP_INFO; -+ -+ -+/************************************************************************** -+ * Name : BpSetBoardId -+ * -+ * Description: This function find the BOARD_PARAMETERS structure for the -+ * specified board id string and assigns it to a global, static -+ * variable. -+ * -+ * Parameters : [IN] pszBoardId - Board id string that is saved into NVRAM. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_FOUND - Error, board id input string does not -+ * have a board parameters configuration record. -+ ***************************************************************************/ -+int BpSetBoardId( char *pszBoardId ); -+ -+/************************************************************************** -+ * Name : BpGetBoardIds -+ * -+ * Description: This function returns all of the supported board id strings. -+ * -+ * Parameters : [OUT] pszBoardIds - Address of a buffer that the board id -+ * strings are returned in. Each id starts at BP_BOARD_ID_LEN -+ * boundary. -+ * [IN] nBoardIdsSize - Number of BP_BOARD_ID_LEN elements that -+ * were allocated in pszBoardIds. -+ * -+ * Returns : Number of board id strings returned. -+ ***************************************************************************/ -+int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize ); -+ -+/************************************************************************** -+ * Name : BpGetEthernetMacInfo -+ * -+ * Description: This function returns all of the supported board id strings. -+ * -+ * Parameters : [OUT] pEnetInfos - Address of an array of ETHERNET_MAC_INFO -+ * buffers. -+ * [IN] nNumEnetInfos - Number of ETHERNET_MAC_INFO elements that -+ * are pointed to by pEnetInfos. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ ***************************************************************************/ -+int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos ); -+ -+/************************************************************************** -+ * Name : BpGetSdramSize -+ * -+ * Description: This function returns a constant that describees the board's -+ * SDRAM type and size. -+ * -+ * Parameters : [OUT] pulSdramSize - Address of short word that the SDRAM size -+ * is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ ***************************************************************************/ -+int BpGetSdramSize( unsigned long *pulSdramSize ); -+ -+/************************************************************************** -+ * Name : BpGetPsiSize -+ * -+ * Description: This function returns the persistent storage size in K bytes. -+ * -+ * Parameters : [OUT] pulPsiSize - Address of short word that the persistent -+ * storage size is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ ***************************************************************************/ -+int BpGetPsiSize( unsigned long *pulPsiSize ); -+ -+/************************************************************************** -+ * Name : BpGetRj11InnerOuterPairGpios -+ * -+ * Description: This function returns the GPIO pin assignments for changing -+ * between the RJ11 inner pair and RJ11 outer pair. -+ * -+ * Parameters : [OUT] pusInner - Address of short word that the RJ11 inner pair -+ * GPIO pin is returned in. -+ * [OUT] pusOuter - Address of short word that the RJ11 outer pair -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, values are returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner, -+ unsigned short *pusOuter ); -+ -+/************************************************************************** -+ * Name : BpGetPressAndHoldResetGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the press -+ * and hold reset button. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the press and hold -+ * reset button GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetPressAndHoldResetGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetVoipResetGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the VOIP -+ * Reset operation. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the VOIP reset -+ * GPIO pin is returned in. -+ * [IN] dspNum - Address of the DSP to query. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipResetGpio( unsigned char dspNum, unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetVoipIntrGpio -+ * -+ * Description: This function returns the GPIO pin assignment for VoIP interrupt. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the VOIP interrupt -+ * GPIO pin is returned in. -+ * [IN] dspNum - Address of the DSP to query. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipIntrGpio( unsigned char dspNum, unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetPcmciaResetGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the PCMCIA -+ * Reset operation. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the PCMCIA reset -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetPcmciaResetGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetUartRtsCtsGpios -+ * -+ * Description: This function returns the GPIO pin assignments for RTS and CTS -+ * UART signals. -+ * -+ * Parameters : [OUT] pusRts - Address of short word that the UART RTS GPIO -+ * pin is returned in. -+ * [OUT] pusCts - Address of short word that the UART CTS GPIO -+ * pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, values are returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts ); -+ -+/************************************************************************** -+ * Name : BpGetAdslLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the ADSL -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetAdslLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetAdslFailLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the ADSL -+ * LED that is used when there is a DSL connection failure. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the ADSL LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetAdslFailLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetWirelessLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the Wireless -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetWirelessAntInUse -+ * -+ * Description: This function returns the antennas in use for wireless -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Antenna -+ * is in use. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessAntInUse( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetWirelessSesBtnGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the Wireless -+ * Ses Button. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses -+ * Button GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessSesBtnGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetWirelessSesExtIntr -+ * -+ * Description: This function returns the external interrupt number for the -+ * Wireless Ses Button. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses -+ * external interrup is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessSesExtIntr( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetWirelessSesLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the Wireless -+ * Ses Led. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the Wireless Ses -+ * Led GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessSesLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetUsbLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the USB -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the USB LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetUsbLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetHpnaLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the HPNA -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the HPNA LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetHpnaLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetWanDataLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the WAN Data -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the WAN Data LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWanDataLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetPppLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the PPP -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the PPP LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetPppLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetPppFailLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the PPP -+ * LED that is used when there is a PPP connection failure. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the PPP LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetPppFailLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetVoipLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the VOIP -+ * LED. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the VOIP LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetBootloaderPowerOnLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the power -+ * on LED that is set by the bootloader. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the alarm LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetBootloaderAlarmLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the alarm -+ * LED that is set by the bootloader. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the alarm LED -+ * GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetBootloaderAlarmLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetBootloaderResetCfgLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the reset -+ * configuration LED that is set by the bootloader. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the reset -+ * configuration LED GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetBootloaderResetCfgLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetBootloaderStopLedGpio -+ * -+ * Description: This function returns the GPIO pin assignment for the break -+ * into bootloader LED that is set by the bootloader. -+ * -+ * Parameters : [OUT] pusValue - Address of short word that the break into -+ * bootloader LED GPIO pin is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetBootloaderStopLedGpio( unsigned short *pusValue ); -+ -+/************************************************************************** -+ * Name : BpGetWirelessExtIntr -+ * -+ * Description: This function returns the Wireless external interrupt number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the wireless -+ * external interrupt number is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetWirelessExtIntr( unsigned long *pulValue ); -+ -+/************************************************************************** -+ * Name : BpGetAdslDyingGaspExtIntr -+ * -+ * Description: This function returns the ADSL Dying Gasp external interrupt -+ * number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the ADSL Dying Gasp -+ * external interrupt number is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetAdslDyingGaspExtIntr( unsigned long *pulValue ); -+ -+/************************************************************************** -+ * Name : BpGetVoipExtIntr -+ * -+ * Description: This function returns the VOIP external interrupt number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the VOIP -+ * external interrupt number is returned in. -+ * [IN] dspNum - Address of the DSP to query. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipExtIntr( unsigned char dspNum, unsigned long *pulValue ); -+ -+/************************************************************************** -+ * Name : BpGetHpnaExtIntr -+ * -+ * Description: This function returns the HPNA external interrupt number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the HPNA -+ * external interrupt number is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetHpnaExtIntr( unsigned long *pulValue ); -+ -+/************************************************************************** -+ * Name : BpGetHpnaChipSelect -+ * -+ * Description: This function returns the HPNA chip select number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the HPNA -+ * chip select number is returned in. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetHpnaChipSelect( unsigned long *pulValue ); -+ -+/************************************************************************** -+ * Name : BpGetVoipChipSelect -+ * -+ * Description: This function returns the VOIP chip select number. -+ * -+ * Parameters : [OUT] pulValue - Address of short word that the VOIP -+ * chip select number is returned in. -+ * [IN] dspNum - Address of the DSP to query. -+ * -+ * Returns : BP_SUCCESS - Success, value is returned. -+ * BP_BOARD_ID_NOT_SET - Error, BpSetBoardId has not been called. -+ * BP_VALUE_NOT_DEFINED - At least one return value is not defined -+ * for the board. -+ ***************************************************************************/ -+int BpGetVoipChipSelect( unsigned char dspNum, unsigned long *pulValue ); -+ -+#endif /* __ASSEMBLER__ */ -+ -+#if __cplusplus -+} -+#endif -+ -+#endif /* _BOARDPARMS_H */ -+ diff --git a/openwrt/target/linux/brcm63xx-2.6/patches/050-disable-synchronize_net.patch b/openwrt/target/linux/brcm63xx-2.6/patches/050-disable-synchronize_net.patch deleted file mode 100644 index 737a70a48d..0000000000 --- a/openwrt/target/linux/brcm63xx-2.6/patches/050-disable-synchronize_net.patch +++ /dev/null @@ -1,13 +0,0 @@ -diff -Naurp linux-2.6.16.7-generic-patched/net/ipv4/af_inet.c linux-2.6.16.7-patched/net/ipv4/af_inet.c ---- linux-2.6.16.7-generic-patched/net/ipv4/af_inet.c 2006-04-17 23:53:25.000000000 +0200 -+++ linux-2.6.16.7-patched/net/ipv4/af_inet.c 2006-07-05 15:33:47.000000000 +0200 -@@ -940,7 +940,9 @@ void inet_register_protosw(struct inet_p - out: - spin_unlock_bh(&inetsw_lock); - -+#ifndef CONFIG_MIPS_BRCM - synchronize_net(); -+#endif - - return; -