From: John Crispin Date: Sat, 5 Apr 2014 16:34:20 +0000 (+0000) Subject: lantiq: cleanup the dsl control scripts X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f464b7d17650df8c8651486aa19be6bfdf24f26e;p=openwrt%2Fstaging%2Fflorian.git lantiq: cleanup the dsl control scripts Signed-off-by: John Crispin SVN-Revision: 40381 --- diff --git a/package/network/config/ltq-adsl-app/Config.in b/package/network/config/ltq-adsl-app/Config.in deleted file mode 100644 index 728fe65b31..0000000000 --- a/package/network/config/ltq-adsl-app/Config.in +++ /dev/null @@ -1,9 +0,0 @@ -config LTQ_DSL_ENABLE_SOAP - bool "Enable SOAP support" - depends on PACKAGE_ltq-dsl-app - default n - -config LTQ_DSL_ENABLE_DSL_EVENT_POLLING - bool "Include Event Polling support" - depends on PACKAGE_ltq-dsl-app - default n diff --git a/package/network/config/ltq-adsl-app/Makefile b/package/network/config/ltq-adsl-app/Makefile index 92445e5580..639ed1e6b1 100644 --- a/package/network/config/ltq-adsl-app/Makefile +++ b/package/network/config/ltq-adsl-app/Makefile @@ -40,10 +40,6 @@ define Package/ltq-adsl-app/description Infineon DSL CPE API for Amazon SE, Danube and Vinax. endef -define Package/ltq-adsl-app/config - source "$(SOURCE)/Config.in" -endef - LTQ_DSL_MAX_DEVICE=1 LTQ_DSL_LINES_PER_DEVICE=1 LTQ_DSL_CHANNELS_PER_LINE=1 @@ -74,16 +70,6 @@ CONFIGURE_ARGS += \ --enable-dsl-pm-line-thresholds \ --enable-dsl-pm-optional-parameters -ifeq ($(CONFIG_LTQ_DSL_ENABLE_SOAP),y) -CONFIGURE_ARGS += \ - --enable-soap-support -endif - -ifeq ($(CONFIG_LTQ_DSL_ENABLE_DSL_EVENT_POLLING),y) -CONFIGURE_ARGS += \ - --enable-dsl-event-polling -endif - TARGET_CFLAGS += -I$(LINUX_DIR)/include define Package/ltq-adsl-app/install @@ -92,7 +78,6 @@ define Package/ltq-adsl-app/install $(INSTALL_DIR) $(1)/sbin $(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dsl_cpe_control $(1)/sbin - $(INSTALL_BIN) ./files/dsl_notify.sh $(1)/sbin endef $(eval $(call BuildPackage,ltq-adsl-app)) diff --git a/package/network/config/ltq-adsl-app/files/dsl_control b/package/network/config/ltq-adsl-app/files/dsl_control index e8a286f2bb..d48f3f6266 100644 --- a/package/network/config/ltq-adsl-app/files/dsl_control +++ b/package/network/config/ltq-adsl-app/files/dsl_control @@ -10,252 +10,7 @@ EXTRA_HELP=" status Get DSL status information SERVICE_DAEMONIZE=1 SERVICE_WRITE_PID=1 -# -# Basic functions to send CLI commands to the dsl_cpe_control daemon -# -dsl_cmd() { - killall -0 dsl_cpe_control && ( - echo "$@" > /tmp/pipe/dsl_cpe0_cmd - cat /tmp/pipe/dsl_cpe0_ack - ) -} -dsl_val() { - echo $(expr "$1" : '.*'$2'=\([-\.[:alnum:]]*\).*') -} - -# -# Simple divide by 10 routine to cope with one decimal place -# -dbt() { - local a=$(expr $1 / 10) - local b=$(expr $1 % 10) - echo "${a}.${b}" -} -# -# Take a number and convert to k or meg -# -scale() { - local val=$1 - local a - local b - - if [ "$val" -gt 1000000 ]; then - a=$(expr $val / 1000) - b=$(expr $a % 1000) - a=$(expr $a / 1000) - printf "%d.%03d Mb" ${a} ${b} - elif [ "$val" -gt 1000 ]; then - a=$(expr $val / 1000) - printf "%d Kb" ${a} - else - echo "${val} b" - fi -} - -# -# Read the data rates for both directions -# -data_rates() { - local csg - local dru - local drd - local sdru - local sdrd - - csg=$(dsl_cmd g997csg 0 1) - drd=$(dsl_val "$csg" ActualDataRate) - - csg=$(dsl_cmd g997csg 0 0) - dru=$(dsl_val "$csg" ActualDataRate) - - [ -z "$drd" ] && drd=0 - [ -z "$dru" ] && dru=0 - - sdrd=$(scale $drd) - sdru=$(scale $dru) - - if [ "$action" = "lucistat" ]; then - echo "dsl.data_rate_down=$drd" - echo "dsl.data_rate_up=$dru" - echo "dsl.data_rate_down_s=\"$sdrd\"" - echo "dsl.data_rate_up_s=\"$sdru\"" - else - echo "Data Rate: ${sdrd}/s / ${sdru}/s" - fi -} - -# -# Chipset -# -chipset() { - local vig - local cs - local csv - - vig=$(dsl_cmd vig) - cs=$(dsl_val "$vig" DSL_ChipSetType) - csv=$(dsl_val "$vig" DSL_ChipSetHWVersion) - - if [ "$action" = "lucistat" ]; then - echo "dsl.chipset=\"${cs} ${csv}\"" - else - echo "Chipset: ${cs} ${csv}" - fi -} - -# -# Work out how long the line has been up -# -line_uptime() { - local ccsg - local et - local etr - local d - local h - local m - local s - local rc="" - - ccsg=$(dsl_cmd pmccsg 0 0 0) - et=$(dsl_val "$ccsg" nElapsedTime) - - [ -z "$et" ] && et=0 - - if [ "$action" = "lucistat" ]; then - echo "dsl.line_uptime=${et}" - return - fi - - d=$(expr $et / 86400) - etr=$(expr $et % 86400) - h=$(expr $etr / 3600) - etr=$(expr $etr % 3600) - m=$(expr $etr / 60) - s=$(expr $etr % 60) - - - [ "${d}${h}${m}${s}" -ne 0 ] && rc="${s}s" - [ "${d}${h}${m}" -ne 0 ] && rc="${m}m ${rc}" - [ "${d}${h}" -ne 0 ] && rc="${h}h ${rc}" - [ "${d}" -ne 0 ] && rc="${d}d ${rc}" - - [ -z "$rc" ] && rc="down" - echo "Line Uptime: ${rc}" -} - -# -# Get noise and attenuation figures -# -line_data() { - local lsg - local latnu - local latnd - local snru - local snrd - - lsg=$(dsl_cmd g997lsg 1 1) - latnd=$(dsl_val "$lsg" LATN) - snrd=$(dsl_val "$lsg" SNR) - - lsg=$(dsl_cmd g997lsg 0 1) - latnu=$(dsl_val "$lsg" LATN) - snru=$(dsl_val "$lsg" SNR) - - [ -z "$latnd" ] && latnd=0 - [ -z "$latnu" ] && latnu=0 - [ -z "$snrd" ] && snrd=0 - [ -z "$snru" ] && snru=0 - - latnd=$(dbt $latnd) - latnu=$(dbt $latnu) - snrd=$(dbt $snrd) - snru=$(dbt $snru) - - if [ "$action" = "lucistat" ]; then - echo "dsl.line_attenuation_down=$latnd" - echo "dsl.line_attenuation_up=$latnu" - echo "dsl.noise_margin_down=$snrd" - echo "dsl.noise_margin_up=$snru" - else - echo "Line Attenuation: ${latnd}dB / ${latnu}dB" - echo "Noise Margin: ${snrd}dB / ${snru}dB" - fi -} - -# -# Is the line up? Or what state is it in? -# -line_state() { - local lsg=$(dsl_cmd lsg) - local ls=$(dsl_val "$lsg" nLineState); - local s; - - case "$ls" in - "0x0") s="not initialized" ;; - "0x1") s="exception" ;; - "0x10") s="not updated" ;; - "0xff") s="idle request" ;; - "0x100") s="idle" ;; - "0x1ff") s="silent request" ;; - "0x200") s="silent" ;; - "0x300") s="handshake" ;; - "0x380") s="full_init" ;; - "0x400") s="discovery" ;; - "0x500") s="training" ;; - "0x600") s="analysis" ;; - "0x700") s="exchange" ;; - "0x800") s="showtime_no_sync" ;; - "0x801") s="showtime_tc_sync" ;; - "0x900") s="fastretrain" ;; - "0xa00") s="lowpower_l2" ;; - "0xb00") s="loopdiagnostic active" ;; - "0xb10") s="loopdiagnostic data exchange" ;; - "0xb20") s="loopdiagnostic data request" ;; - "0xc00") s="loopdiagnostic complete" ;; - "0x1000000") s="test" ;; - "0xd00") s="resync" ;; - "0x3c0") s="short init entry" ;; - "") s="not running daemon"; ls="0xfff" ;; - *) s="unknown" ;; - esac - - if [ $action = "lucistat" ]; then - echo "dsl.line_state_num=$ls" - echo "dsl.line_state_detail=\"$s\"" - if [ "$ls" = "0x801" ]; then - echo "dsl.line_state=\"UP\"" - else - echo "dsl.line_state=\"DOWN\"" - fi - else - if [ "$ls" = "0x801" ]; then - echo "Line State: UP [$ls: $s]" - else - echo "Line State: DOWN [$ls: $s]" - fi - fi -} - -# -# Main status routine -# -status() { - chipset - line_state - data_rates - line_data - line_uptime -} - -# -# Luci (lua) compatible version that's easy to parse -# -lucistat() { - echo "local dsl={}" - status - echo "return dsl" -} - +. /lib/functions/lantiq_dsl.sh annex_b=10_00_10_00_00_04_00_00 annex_bdmt=10_00_00_00_00_00_00_00 @@ -272,9 +27,6 @@ annex_m=00_00_00_00_40_00_04_00 annex_m2=00_00_00_00_40_00_00_00 annex_m2p=00_00_00_00_00_00_04_00 -# -# Simple start routine -# start() { local annex local firmware @@ -283,24 +35,16 @@ start() { config_get annex wan annex config_get firmware wan firmware - # get xtu eval "xtu=\"\${annex_$annex}\"" - # check for firmware [ -z "${firmware}" ] && firmware=adsl.bin - # start CPE dsl daemon in the background service_start /sbin/dsl_cpe_control -i${xtu} \ -n /sbin/dsl_notify.sh \ -f /lib/firmware/${firmware} } -# -# For stop we want to simulate the notification call for when -# the line goes down, so that we can stop the ppp link before -# we die. -# stop() { DSL_NOTIFICATION_TYPE="DSL_INTERFACE_STATUS" \ DSL_INTERFACE_STATUS="DOWN" \ diff --git a/package/network/config/ltq-adsl-app/files/dsl_notify.sh b/package/network/config/ltq-adsl-app/files/dsl_notify.sh deleted file mode 100644 index 5e9f3964e8..0000000000 --- a/package/network/config/ltq-adsl-app/files/dsl_notify.sh +++ /dev/null @@ -1,44 +0,0 @@ -#!/bin/sh -# -# This script is called by dsl_cpe_control whenever there is a DSL event, -# we only actually care about the DSL_INTERFACE_STATUS events as these -# tell us the line has either come up or gone down. -# -# The rest of the code is basically the same at the atm hotplug code -# - -[ "$DSL_NOTIFICATION_TYPE" = "DSL_INTERFACE_STATUS" ] || exit 0 - -. /lib/functions.sh - -include /lib/network -scan_interfaces - -local found=0 -local ifc -for ifc in $interfaces; do - local up - config_get_bool up "$ifc" up 0 - - local auto - config_get_bool auto "$ifc" auto 1 - - local proto - config_get proto "$ifc" proto - - if [ "$DSL_INTERFACE_STATUS" = "UP" ]; then - if [ "$proto" = "pppoa" ] && [ "$up" != 1 ] && [ "$auto" = 1 ]; then - found=1 - ( sleep 1; ifup "$ifc" ) & - fi - else - if [ "$proto" = "pppoa" ] && [ "$up" = 1 ] && [ "$auto" = 1 ]; then - found=1 - ( sleep 1; ifdown "$ifc" ) & - fi - fi -done - -if [ "$found" != 1 ]; then - logger "Found no matching interface for DSL notification ($DSL_INTERFACE_STATUS)" -fi diff --git a/package/network/config/ltq-vdsl-app/Makefile b/package/network/config/ltq-vdsl-app/Makefile index d4e4ec4501..ee95860f38 100644 --- a/package/network/config/ltq-vdsl-app/Makefile +++ b/package/network/config/ltq-vdsl-app/Makefile @@ -71,7 +71,6 @@ define Package/ltq-vdsl-app/install $(INSTALL_DIR) $(1)/sbin $(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dsl_cpe_control $(1)/sbin/vdsl_cpe_control - $(INSTALL_BIN) ./files/dsl_notify.sh $(1)/sbin endef $(eval $(call BuildPackage,ltq-vdsl-app)) diff --git a/package/network/config/ltq-vdsl-app/files/dsl_control b/package/network/config/ltq-vdsl-app/files/dsl_control index 0d7d32cb0b..8f24823851 100644 --- a/package/network/config/ltq-vdsl-app/files/dsl_control +++ b/package/network/config/ltq-vdsl-app/files/dsl_control @@ -10,297 +10,29 @@ EXTRA_HELP=" status Get DSL status information SERVICE_DAEMONIZE=1 SERVICE_WRITE_PID=1 -# -# Basic functions to send CLI commands to the vdsl_cpe_control daemon -# -dsl_cmd() { - killall -0 vdsl_cpe_control && ( - echo "$@" > /tmp/pipe/dsl_cpe0_cmd - cat /tmp/pipe/dsl_cpe0_ack - ) -} -dsl_val() { - echo $(expr "$1" : '.*'$2'=\([-\.[:alnum:]]*\).*') -} - -# -# Simple divide by 10 routine to cope with one decimal place -# -dbt() { - local a=$(expr $1 / 10) - local b=$(expr $1 % 10) - echo "${a}.${b}" -} -# -# Take a number and convert to k or meg -# -scale() { - local val=$1 - local a - local b - - if [ "$val" -gt 1000000 ]; then - a=$(expr $val / 1000) - b=$(expr $a % 1000) - a=$(expr $a / 1000) - printf "%d.%03d Mb" ${a} ${b} - elif [ "$val" -gt 1000 ]; then - a=$(expr $val / 1000) - printf "%d Kb" ${a} - else - echo "${val} b" - fi -} - -# -# Read the data rates for both directions -# -data_rates() { - local csg - local dru - local drd - local sdru - local sdrd - - csg=$(dsl_cmd g997csg 0 1) - drd=$(dsl_val "$csg" ActualDataRate) - - csg=$(dsl_cmd g997csg 0 0) - dru=$(dsl_val "$csg" ActualDataRate) - - [ -z "$drd" ] && drd=0 - [ -z "$dru" ] && dru=0 - - sdrd=$(scale $drd) - sdru=$(scale $dru) - - if [ "$action" = "lucistat" ]; then - echo "dsl.data_rate_down=$drd" - echo "dsl.data_rate_up=$dru" - echo "dsl.data_rate_down_s=\"$sdrd\"" - echo "dsl.data_rate_up_s=\"$sdru\"" - else - echo "Data Rate: ${sdrd}/s / ${sdru}/s" - fi -} +. /lib/functions/lantiq_dsl.sh +XDSL_CTRL=vdsl_cpe_control -# -# Chipset -# -chipset() { - local vig - local cs - local csv - - vig=$(dsl_cmd vig) - cs=$(dsl_val "$vig" DSL_ChipSetType) - csv=$(dsl_val "$vig" DSL_ChipSetHWVersion) - - if [ "$action" = "lucistat" ]; then - echo "dsl.chipset=\"${cs} ${csv}\"" - else - echo "Chipset: ${cs} ${csv}" - fi -} - -# -# Work out how long the line has been up -# -line_uptime() { - local ccsg - local et - local etr - local d - local h - local m - local s - local rc="" - - ccsg=$(dsl_cmd pmccsg 0 0 0) - et=$(dsl_val "$ccsg" nElapsedTime) - - [ -z "$et" ] && et=0 - - if [ "$action" = "lucistat" ]; then - echo "dsl.line_uptime=${et}" - return - fi - - d=$(expr $et / 86400) - etr=$(expr $et % 86400) - h=$(expr $etr / 3600) - etr=$(expr $etr % 3600) - m=$(expr $etr / 60) - s=$(expr $etr % 60) - - - [ "${d}${h}${m}${s}" -ne 0 ] && rc="${s}s" - [ "${d}${h}${m}" -ne 0 ] && rc="${m}m ${rc}" - [ "${d}${h}" -ne 0 ] && rc="${h}h ${rc}" - [ "${d}" -ne 0 ] && rc="${d}d ${rc}" - - [ -z "$rc" ] && rc="down" - echo "Line Uptime: ${rc}" -} - -# -# Get noise and attenuation figures -# -line_data() { - local lsg - local latnu - local latnd - local snru - local snrd - - lsg=$(dsl_cmd g997lsg 1 1) - latnd=$(dsl_val "$lsg" LATN) - snrd=$(dsl_val "$lsg" SNR) - - lsg=$(dsl_cmd g997lsg 0 1) - latnu=$(dsl_val "$lsg" LATN) - snru=$(dsl_val "$lsg" SNR) - - [ -z "$latnd" ] && latnd=0 - [ -z "$latnu" ] && latnu=0 - [ -z "$snrd" ] && snrd=0 - [ -z "$snru" ] && snru=0 - - latnd=$(dbt $latnd) - latnu=$(dbt $latnu) - snrd=$(dbt $snrd) - snru=$(dbt $snru) - - if [ "$action" = "lucistat" ]; then - echo "dsl.line_attenuation_down=$latnd" - echo "dsl.line_attenuation_up=$latnu" - echo "dsl.noise_margin_down=$snrd" - echo "dsl.noise_margin_up=$snru" - else - echo "Line Attenuation: ${latnd}dB / ${latnu}dB" - echo "Noise Margin: ${snrd}dB / ${snru}dB" - fi -} - -# -# Is the line up? Or what state is it in? -# -line_state() { - local lsg=$(dsl_cmd lsg) - local ls=$(dsl_val "$lsg" nLineState); - local s; - - case "$ls" in - "0x0") s="not initialized" ;; - "0x1") s="exception" ;; - "0x10") s="not updated" ;; - "0xff") s="idle request" ;; - "0x100") s="idle" ;; - "0x1ff") s="silent request" ;; - "0x200") s="silent" ;; - "0x300") s="handshake" ;; - "0x380") s="full_init" ;; - "0x400") s="discovery" ;; - "0x500") s="training" ;; - "0x600") s="analysis" ;; - "0x700") s="exchange" ;; - "0x800") s="showtime_no_sync" ;; - "0x801") s="showtime_tc_sync" ;; - "0x900") s="fastretrain" ;; - "0xa00") s="lowpower_l2" ;; - "0xb00") s="loopdiagnostic active" ;; - "0xb10") s="loopdiagnostic data exchange" ;; - "0xb20") s="loopdiagnostic data request" ;; - "0xc00") s="loopdiagnostic complete" ;; - "0x1000000") s="test" ;; - "0xd00") s="resync" ;; - "0x3c0") s="short init entry" ;; - "") s="not running daemon"; ls="0xfff" ;; - *) s="unknown" ;; - esac - - if [ $action = "lucistat" ]; then - echo "dsl.line_state_num=$ls" - echo "dsl.line_state_detail=\"$s\"" - if [ "$ls" = "0x801" ]; then - echo "dsl.line_state=\"UP\"" - else - echo "dsl.line_state=\"DOWN\"" - fi - else - if [ "$ls" = "0x801" ]; then - echo "Line State: UP [$ls: $s]" - else - echo "Line State: DOWN [$ls: $s]" - fi - fi -} - -# -# Main status routine -# -status() { - chipset - line_state - data_rates - line_data - line_uptime -} - -# -# Luci (lua) compatible version that's easy to parse -# -lucistat() { - echo "local dsl={}" - status - echo "return dsl" -} - - -annex_b=10_00_10_00_00_04_00_00 -annex_bdmt=10_00_00_00_00_00_00_00 -annex_b2=00_00_10_00_00_00_00_00 -annex_b2p=00_00_00_00_00_04_00_00 -annex_a=04_01_04_00_00_01_00_00 -annex_at1=01_00_00_00_00_00_00_00 -annex_alite=00_01_00_00_00_00_00_00 -annex_admt=04_00_00_00_00_00_00_00 -annex_a2=00_00_04_00_00_00_00_00 -annex_a2p=00_00_00_00_00_01_00_00 -annex_l=00_00_00_00_04_00_00_00 -annex_m=00_00_00_00_40_00_04_00 -annex_m2=00_00_00_00_40_00_00_00 -annex_m2p=00_00_00_00_00_00_04_00 - -# -# Simple start routine -# start() { - local annex - local firmware - local xtu + local firmware xtu + config_load network - config_get annex wan annex + config_get firmware wan firmware - - # get xtu - eval "xtu=\"\${annex_$annex}\"" - - # check for firmware [ -z "${firmware}" ] && firmware=vdsl.bin - # start CPE dsl daemon in the background - service_start /sbin/vdsl_cpe_control -i${xtu} \ - -n /sbin/dsl_notify.sh \ - -f /lib/firmware/${firmware} + config_get xtu wan xtu + [ -z "${xtu}" ] && + xtu=10_00_10_00_00_04_01_07 + + service_start /sbin/vdsl_cpe_control \ + -i${xtu} \ + -T4_0_1 + -n /sbin/dsl_notify.sh \ + -f /lib/firmware/${firmware} } -# -# For stop we want to simulate the notification call for when -# the line goes down, so that we can stop the ppp link before -# we die. -# stop() { DSL_NOTIFICATION_TYPE="DSL_INTERFACE_STATUS" \ DSL_INTERFACE_STATUS="DOWN" \ @@ -308,4 +40,3 @@ stop() { service_stop /sbin/vdsl_cpe_control } - diff --git a/package/network/config/ltq-vdsl-app/files/dsl_notify.sh b/package/network/config/ltq-vdsl-app/files/dsl_notify.sh deleted file mode 100644 index 0f1f535f2d..0000000000 --- a/package/network/config/ltq-vdsl-app/files/dsl_notify.sh +++ /dev/null @@ -1,63 +0,0 @@ -#!/bin/sh -# -# This script is called by dsl_cpe_control whenever there is a DSL event, -# we only actually care about the DSL_INTERFACE_STATUS events as these -# tell us the line has either come up or gone down. -# -# The rest of the code is basically the same at the atm hotplug code -# - -[ "$DSL_NOTIFICATION_TYPE" = "DSL_INTERFACE_STATUS" ] || exit 0 - -. /usr/share/libubox/jshn.sh -. /lib/functions.sh -. /lib/functions/leds.sh - -include /lib/network -scan_interfaces - -logger "Found no matching interface for DSL notification ($DSL_INTERFACE_STATUS)" - -local default -config_load system -config_get default led_adsl default -if [ "$default" != 1 ]; then - case "$DSL_INTERFACE_STATUS" in - "HANDSHAKE") led_timer adsl 500 500;; - "TRAINING") led_timer adsl 200 200;; - "UP") led_on adsl;; - *) led_off adsl - esac -fi - -local interfaces=`ubus list network.interface.\* | cut -d"." -f3` -local ifc -for ifc in $interfaces; do - - local up - json_load "$(ifstatus $ifc)" - json_get_var up up - - local auto - config_get_bool auto "$ifc" auto 1 - - local proto - json_get_var proto proto - - if [ "$DSL_INTERFACE_STATUS" = "UP" ]; then - if [ "$proto" = "pppoa" ] && [ "$up" != 1 ] && [ "$auto" = 1 ]; then - ( sleep 1; ifup "$ifc" ) & - fi - else - if [ "$proto" = "pppoa" ] && [ "$up" = 1 ] && [ "$auto" = 1 ]; then - ( sleep 1; ifdown "$ifc" ) & - else - json_get_var autostart autostart - if [ "$proto" = "pppoa" ] && [ "$up" != 1 ] && [ "$autostart" = 1 ]; then - ( sleep 1; ifdown "$ifc" ) & - fi - fi - fi -done - - diff --git a/target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh b/target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh new file mode 100644 index 0000000000..e817fdd6b4 --- /dev/null +++ b/target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh @@ -0,0 +1,244 @@ +#!/bin/sh /etc/rc.common +# Copyright (C) 2012 OpenWrt.org + +XDSL_CTRL=dsl_cpe_control + +# +# Basic functions to send CLI commands to the vdsl_cpe_control daemon +# +dsl_cmd() { + killall -0 ${XDSL_CTRL} && ( + echo "$@" > /tmp/pipe/dsl_cpe0_cmd + cat /tmp/pipe/dsl_cpe0_ack + ) +} +dsl_val() { + echo $(expr "$1" : '.*'$2'=\([-\.[:alnum:]]*\).*') +} + +# +# Simple divide by 10 routine to cope with one decimal place +# +dbt() { + local a=$(expr $1 / 10) + local b=$(expr $1 % 10) + echo "${a}.${b}" +} +# +# Take a number and convert to k or meg +# +scale() { + local val=$1 + local a + local b + + if [ "$val" -gt 1000000 ]; then + a=$(expr $val / 1000) + b=$(expr $a % 1000) + a=$(expr $a / 1000) + printf "%d.%03d Mb" ${a} ${b} + elif [ "$val" -gt 1000 ]; then + a=$(expr $val / 1000) + printf "%d Kb" ${a} + else + echo "${val} b" + fi +} + +# +# Read the data rates for both directions +# +data_rates() { + local csg + local dru + local drd + local sdru + local sdrd + + csg=$(dsl_cmd g997csg 0 1) + drd=$(dsl_val "$csg" ActualDataRate) + + csg=$(dsl_cmd g997csg 0 0) + dru=$(dsl_val "$csg" ActualDataRate) + + [ -z "$drd" ] && drd=0 + [ -z "$dru" ] && dru=0 + + sdrd=$(scale $drd) + sdru=$(scale $dru) + + if [ "$action" = "lucistat" ]; then + echo "dsl.data_rate_down=$drd" + echo "dsl.data_rate_up=$dru" + echo "dsl.data_rate_down_s=\"$sdrd\"" + echo "dsl.data_rate_up_s=\"$sdru\"" + else + echo "Data Rate: ${sdrd}/s / ${sdru}/s" + fi +} + +# +# Chipset +# +chipset() { + local vig + local cs + local csv + + vig=$(dsl_cmd vig) + cs=$(dsl_val "$vig" DSL_ChipSetType) + csv=$(dsl_val "$vig" DSL_ChipSetHWVersion) + + if [ "$action" = "lucistat" ]; then + echo "dsl.chipset=\"${cs} ${csv}\"" + else + echo "Chipset: ${cs} ${csv}" + fi +} + +# +# Work out how long the line has been up +# +line_uptime() { + local ccsg + local et + local etr + local d + local h + local m + local s + local rc="" + + ccsg=$(dsl_cmd pmccsg 0 0 0) + et=$(dsl_val "$ccsg" nElapsedTime) + + [ -z "$et" ] && et=0 + + if [ "$action" = "lucistat" ]; then + echo "dsl.line_uptime=${et}" + return + fi + + d=$(expr $et / 86400) + etr=$(expr $et % 86400) + h=$(expr $etr / 3600) + etr=$(expr $etr % 3600) + m=$(expr $etr / 60) + s=$(expr $etr % 60) + + + [ "${d}${h}${m}${s}" -ne 0 ] && rc="${s}s" + [ "${d}${h}${m}" -ne 0 ] && rc="${m}m ${rc}" + [ "${d}${h}" -ne 0 ] && rc="${h}h ${rc}" + [ "${d}" -ne 0 ] && rc="${d}d ${rc}" + + [ -z "$rc" ] && rc="down" + echo "Line Uptime: ${rc}" +} + +# +# Get noise and attenuation figures +# +line_data() { + local lsg + local latnu + local latnd + local snru + local snrd + + lsg=$(dsl_cmd g997lsg 1 1) + latnd=$(dsl_val "$lsg" LATN) + snrd=$(dsl_val "$lsg" SNR) + + lsg=$(dsl_cmd g997lsg 0 1) + latnu=$(dsl_val "$lsg" LATN) + snru=$(dsl_val "$lsg" SNR) + + [ -z "$latnd" ] && latnd=0 + [ -z "$latnu" ] && latnu=0 + [ -z "$snrd" ] && snrd=0 + [ -z "$snru" ] && snru=0 + + latnd=$(dbt $latnd) + latnu=$(dbt $latnu) + snrd=$(dbt $snrd) + snru=$(dbt $snru) + + if [ "$action" = "lucistat" ]; then + echo "dsl.line_attenuation_down=$latnd" + echo "dsl.line_attenuation_up=$latnu" + echo "dsl.noise_margin_down=$snrd" + echo "dsl.noise_margin_up=$snru" + else + echo "Line Attenuation: ${latnd}dB / ${latnu}dB" + echo "Noise Margin: ${snrd}dB / ${snru}dB" + fi +} + +# +# Is the line up? Or what state is it in? +# +line_state() { + local lsg=$(dsl_cmd lsg) + local ls=$(dsl_val "$lsg" nLineState); + local s; + + case "$ls" in + "0x0") s="not initialized" ;; + "0x1") s="exception" ;; + "0x10") s="not updated" ;; + "0xff") s="idle request" ;; + "0x100") s="idle" ;; + "0x1ff") s="silent request" ;; + "0x200") s="silent" ;; + "0x300") s="handshake" ;; + "0x380") s="full_init" ;; + "0x400") s="discovery" ;; + "0x500") s="training" ;; + "0x600") s="analysis" ;; + "0x700") s="exchange" ;; + "0x800") s="showtime_no_sync" ;; + "0x801") s="showtime_tc_sync" ;; + "0x900") s="fastretrain" ;; + "0xa00") s="lowpower_l2" ;; + "0xb00") s="loopdiagnostic active" ;; + "0xb10") s="loopdiagnostic data exchange" ;; + "0xb20") s="loopdiagnostic data request" ;; + "0xc00") s="loopdiagnostic complete" ;; + "0x1000000") s="test" ;; + "0xd00") s="resync" ;; + "0x3c0") s="short init entry" ;; + "") s="not running daemon"; ls="0xfff" ;; + *) s="unknown" ;; + esac + + if [ $action = "lucistat" ]; then + echo "dsl.line_state_num=$ls" + echo "dsl.line_state_detail=\"$s\"" + if [ "$ls" = "0x801" ]; then + echo "dsl.line_state=\"UP\"" + else + echo "dsl.line_state=\"DOWN\"" + fi + else + if [ "$ls" = "0x801" ]; then + echo "Line State: UP [$ls: $s]" + else + echo "Line State: DOWN [$ls: $s]" + fi + fi +} + +status() { + chipset + line_state + data_rates + line_data + line_uptime +} + +lucistat() { + echo "local dsl={}" + status + echo "return dsl" +} diff --git a/target/linux/lantiq/base-files/sbin/dsl_notify.sh b/target/linux/lantiq/base-files/sbin/dsl_notify.sh new file mode 100644 index 0000000000..526a88925c --- /dev/null +++ b/target/linux/lantiq/base-files/sbin/dsl_notify.sh @@ -0,0 +1,61 @@ +#!/bin/sh +# +# This script is called by dsl_cpe_control whenever there is a DSL event, +# we only actually care about the DSL_INTERFACE_STATUS events as these +# tell us the line has either come up or gone down. +# +# The rest of the code is basically the same at the atm hotplug code +# + +[ "$DSL_NOTIFICATION_TYPE" = "DSL_INTERFACE_STATUS" ] || exit 0 + +. /usr/share/libubox/jshn.sh +. /lib/functions.sh +. /lib/functions/leds.sh + +include /lib/network +scan_interfaces + +local default +config_load system +config_get default led_adsl default +if [ "$default" != 1 ]; then + case "$DSL_INTERFACE_STATUS" in + "HANDSHAKE") led_timer adsl 500 500;; + "TRAINING") led_timer adsl 200 200;; + "UP") led_on adsl;; + *) led_off adsl + esac +fi + +local interfaces=`ubus list network.interface.\* | cut -d"." -f3` +local ifc +for ifc in $interfaces; do + + local up + json_load "$(ifstatus $ifc)" + json_get_var up up + + local auto + config_get_bool auto "$ifc" auto 1 + + local proto + json_get_var proto proto + + if [ "$DSL_INTERFACE_STATUS" = "UP" ]; then + if [ "$proto" = "pppoa" ] && [ "$up" != 1 ] && [ "$auto" = 1 ]; then + ( sleep 1; ifup "$ifc" ) & + fi + else + if [ "$proto" = "pppoa" ] && [ "$up" = 1 ] && [ "$auto" = 1 ]; then + ( sleep 1; ifdown "$ifc" ) & + else + json_get_var autostart autostart + if [ "$proto" = "pppoa" ] && [ "$up" != 1 ] && [ "$autostart" = 1 ]; then + ( sleep 1; ifdown "$ifc" ) & + fi + fi + fi +done + +