From: Mirko Vogt Date: Tue, 5 Feb 2013 14:57:40 +0000 (+0000) Subject: add support for board named RTA770W X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=f460388ce20403692d06dfbd6ddd7685b15ff555;p=openwrt%2Fstaging%2Fwigyori.git add support for board named RTA770W Actually this board is the very same as the rta770bw, where the additional 'b' within the name just indicates 'Annex B'. The ADSL Modem itself is able to handle both, Annex A as well as Annex B - the loaded firmware makes the only difference SVN-Revision: 35500 --- diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network index 106bf5f86f..f59fed6781 100755 --- a/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network +++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/02_network @@ -14,6 +14,8 @@ ucidef_set_interface_loopback case "$board_name" in +RTA770BW |\ +RTA770W |\ 96348W3 |\ 96358-502V |\ SPW500V) @@ -31,7 +33,6 @@ CT6373-1 |\ D-4P-W |\ "F@ST2604" |\ RTA1320_16M |\ -RTA770BW |\ V2110) ucidef_set_interface_lan "eth0" ucidef_add_switch "eth0" "1" "1" diff --git a/target/linux/brcm63xx/patches-3.6/556-board_rta770w.patch b/target/linux/brcm63xx/patches-3.6/556-board_rta770w.patch new file mode 100644 index 0000000000..e0eedad1e7 --- /dev/null +++ b/target/linux/brcm63xx/patches-3.6/556-board_rta770w.patch @@ -0,0 +1,71 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -796,6 +796,60 @@ + }, + }, + }; ++ ++// Actually this board is the very same as the rta770bw, ++// where the additional 'b' within the name just ++// just indicates 'Annex B'. The ADSL Modem itself is able ++// to handle both Annex A as well as Annex B - ++// the loaded firmware makes the only difference ++static struct board_info __initdata board_rta770w = { ++ .name = "RTA770W", ++ .expected_cpu_id = 0x6345, ++ ++ .has_uart0 = 1, ++ ++ .has_enet0 = 1, ++ ++ .enet0 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++ ++ .leds = { ++ { ++ .name = "RTA770W:green:usb", ++ .gpio = 7, ++ .active_low = 1, ++ }, ++ { ++ .name = "RTA770W:green:adsl", ++ .gpio = 8, ++ }, ++ { ++ .name = "RTA770W:green:diag", ++ .gpio = 10, ++ .active_low = 1, ++ }, ++ { ++ .name = "RTA770W:green:wlan", ++ .gpio = 11, ++ .active_low = 1, ++ }, ++ }, ++ ++ .buttons = { ++ { ++ .desc = "reset", ++ .gpio = 13, ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .active_low = 1, ++ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL, ++ }, ++ }, ++}; + #endif + + /* +@@ -3750,6 +3804,7 @@ + #ifdef CONFIG_BCM63XX_CPU_6345 + &board_96345gw2, + &board_rta770bw, ++ &board_rta770w, + #endif + #ifdef CONFIG_BCM63XX_CPU_6348 + &board_96348r, diff --git a/target/linux/brcm63xx/patches-3.7/556-board_rta770w.patch b/target/linux/brcm63xx/patches-3.7/556-board_rta770w.patch new file mode 100644 index 0000000000..e0eedad1e7 --- /dev/null +++ b/target/linux/brcm63xx/patches-3.7/556-board_rta770w.patch @@ -0,0 +1,71 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -796,6 +796,60 @@ + }, + }, + }; ++ ++// Actually this board is the very same as the rta770bw, ++// where the additional 'b' within the name just ++// just indicates 'Annex B'. The ADSL Modem itself is able ++// to handle both Annex A as well as Annex B - ++// the loaded firmware makes the only difference ++static struct board_info __initdata board_rta770w = { ++ .name = "RTA770W", ++ .expected_cpu_id = 0x6345, ++ ++ .has_uart0 = 1, ++ ++ .has_enet0 = 1, ++ ++ .enet0 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++ ++ .leds = { ++ { ++ .name = "RTA770W:green:usb", ++ .gpio = 7, ++ .active_low = 1, ++ }, ++ { ++ .name = "RTA770W:green:adsl", ++ .gpio = 8, ++ }, ++ { ++ .name = "RTA770W:green:diag", ++ .gpio = 10, ++ .active_low = 1, ++ }, ++ { ++ .name = "RTA770W:green:wlan", ++ .gpio = 11, ++ .active_low = 1, ++ }, ++ }, ++ ++ .buttons = { ++ { ++ .desc = "reset", ++ .gpio = 13, ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .active_low = 1, ++ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL, ++ }, ++ }, ++}; + #endif + + /* +@@ -3750,6 +3804,7 @@ + #ifdef CONFIG_BCM63XX_CPU_6345 + &board_96345gw2, + &board_rta770bw, ++ &board_rta770w, + #endif + #ifdef CONFIG_BCM63XX_CPU_6348 + &board_96348r, diff --git a/target/linux/brcm63xx/patches-3.8/556-board_rta770w.patch b/target/linux/brcm63xx/patches-3.8/556-board_rta770w.patch new file mode 100644 index 0000000000..e0eedad1e7 --- /dev/null +++ b/target/linux/brcm63xx/patches-3.8/556-board_rta770w.patch @@ -0,0 +1,71 @@ +--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c ++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c +@@ -796,6 +796,60 @@ + }, + }, + }; ++ ++// Actually this board is the very same as the rta770bw, ++// where the additional 'b' within the name just ++// just indicates 'Annex B'. The ADSL Modem itself is able ++// to handle both Annex A as well as Annex B - ++// the loaded firmware makes the only difference ++static struct board_info __initdata board_rta770w = { ++ .name = "RTA770W", ++ .expected_cpu_id = 0x6345, ++ ++ .has_uart0 = 1, ++ ++ .has_enet0 = 1, ++ ++ .enet0 = { ++ .has_phy = 1, ++ .phy_id = 0, ++ .force_speed_100 = 1, ++ .force_duplex_full = 1, ++ }, ++ ++ .leds = { ++ { ++ .name = "RTA770W:green:usb", ++ .gpio = 7, ++ .active_low = 1, ++ }, ++ { ++ .name = "RTA770W:green:adsl", ++ .gpio = 8, ++ }, ++ { ++ .name = "RTA770W:green:diag", ++ .gpio = 10, ++ .active_low = 1, ++ }, ++ { ++ .name = "RTA770W:green:wlan", ++ .gpio = 11, ++ .active_low = 1, ++ }, ++ }, ++ ++ .buttons = { ++ { ++ .desc = "reset", ++ .gpio = 13, ++ .type = EV_KEY, ++ .code = KEY_RESTART, ++ .active_low = 1, ++ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL, ++ }, ++ }, ++}; + #endif + + /* +@@ -3750,6 +3804,7 @@ + #ifdef CONFIG_BCM63XX_CPU_6345 + &board_96345gw2, + &board_rta770bw, ++ &board_rta770w, + #endif + #ifdef CONFIG_BCM63XX_CPU_6348 + &board_96348r,